Functional Organic Cations Research Articles

Tunable Emission of Low-Dimensional Organic Metal Halides by Stoichiometric Ratio and Metal Center.

Low-dimensional (LD) organic metal halides (OMHs) have a bright future due to their excellent photoelectric characteristics and unique structure. However, the synthesis and emission control of LD-OMHs are still unclear. Herein, the different dimensional (zero-dimensional (0D), one-dimensional (1D), and three-dimensional (3D)) of OMHs were obtained by the reaction of 1,4-diazabicyclo (2.2.2) octane with PbBr2 in different stoichiometric ratios. This discovery shows that the structure and properties of OMHs can be regulated while maintaining the functional organic cations of OMHs, which broadens the path for the development of functional LD-OMHs. Among them, 0D-OMH 1 and 1D-OMH 3 have narrow-band (full width at half-maximum (fwhm) = 74 nm) and broad-band (fwhm = 201 nm) emission, respectively. We found that when organic cations have no contribution to the formation of conduction band minimum and valence band maximum, and the distances between polyhedrons are larger than the van der Waals diameter of the halogen atom, the effect of phonons on exciton transitions can be reduced to achieve a narrow-band emission. Further, Cu(I)- and Mn (II)-based 0D-OMHs were synthesized, which have high photoluminescence quantum yield (PLQY) (33.97 and 47.33%, respectively). When the emitting of 0D-OMHs produced by the interaction of the metal-center and halogens, the asymmetric planar metal-halogen structure will result in a higher PLQY.

Surface Termination on Unstable Methylammonium-based Perovskite Using a Steric Barrier for Improved Perovskite Solar Cells.

Compared to widely adopted low-dimensional/three-dimensional (LD/3D) heterostructure, functional organic cation based surface termination on perovskite can not only realize advantage of defect passivation but also prevent potential disadvantage of the heterostructure induced intercalation into 3D perovskite. However, it is still very challenging to controllably construct surface termination on organic-inorganic hybrid perovskite because the functional organic cations' substitution reaction is easy to form LD/3D heterostructure. Here, we report using a novel benzyltrimethylammonium (BTA) functional cation with rational designed steric hindrance to effectively surface terminate onto methylammonium lead triiodide (MAPbI3) perovskite, which is composed of the most unstable MA cations. The BTA cation is difficult to form a specific 1.5-dimensional perovskite of BTA4Pb3I10 by cation substitution with MA cation, which then provides a wide processing window (around 10 minutes) for surface terminating on MAPbI3 films. Moreover, the BTAI surface terminated BTAI-MAPbI3 shows better passivation effect than BTA4Pb3I10-MAPbI3 heterojunction. Finally, BTAI surface terminated solar cell (0.085 cm2) and mini-module (11.52 cm2) obtained the efficiencies of 22.03% and 18.57%, which are among the highest efficiencies for MAPbI3 based ones.

Surface Termination on Unstable Methylammonium‐based Perovskite Using a Steric Barrier for Improved Perovskite Solar Cells

AbstractCompared to widely adopted low‐dimensional/three‐dimensional (LD/3D) heterostructure, functional organic cation based surface termination on perovskite can not only realize advantage of defect passivation but also prevent potential disadvantage of the heterostructure induced intercalation into 3D perovskite. However, it is still very challenging to controllably construct surface termination on organic–inorganic hybrid perovskite because the functional organic cations’ substitution reaction is easy to form LD/3D heterostructure. Here, we report using a novel benzyltrimethylammonium (BTA) functional cation with rational designed steric hindrance to effectively surface terminate onto methylammonium lead triiodide (MAPbI3) perovskite, which is composed of the most unstable MA cations. The BTA cation is difficult to form a specific 1.5‐dimensional perovskite of BTA4Pb3I10 by cation substitution with MA cation, which then provides a wide processing window (around 10 minutes) for surface terminating on MAPbI3 films. Moreover, the BTAI surface terminated BTAI‐MAPbI3 shows better passivation effect than BTA4Pb3I10‐MAPbI3 heterojunction. Finally, BTAI surface terminated solar cell (0.085 cm2) and mini‐module (11.52 cm2) obtained the efficiencies of 22.03 % and 18.57 %, which are among the highest efficiencies for MAPbI3 based ones.

Functional organic cation induced 3D-to-0D phase transformation and surface reconstruction of CsPbI3 inorganic perovskite

Efficiency and stability are the main research focuses for perovskite solar cells. Inorganic perovskites like CsPbI3 possess higher chemical stability than those with organic A-site cations, while they also exhibit higher defect density. Nonetheless, it is highly challenging to induce orderly secondary arrangement or reconstruction of inorganic perovskites with reduced defects because of their unique chemical properties. In this work, in-situ three-dimension-to-zero-dimension (3D-to-0D) phase transformation and surface reconstruction on CsPbI3 film is achieved as induced by a functional organic cation, benzyldodecyldimethylammonium (BDA), a process of which that is similar to phase-transfer catalysis. With the help of BDABr salt treatment, 0D Cs4PbI6 perovskites are secondarily formed along CsPbI3 grain boundaries with Cs-related cationic defects passivated, yielding structures of higher stability. The BDA-CsPbI3 films exhibit reduced non-radiative recombination and promoted charge transfer, leading to inorganic perovskite solar cells with a high power conversion efficiency of 20.63% and good operational stability.

From Solid-State Cluster Compounds to Functional PMMA-Based Composites with UV and NIR Blocking Properties, and Tuned Hues.

New nanocomposite materials with UV-NIR blocking properties and hues ranging from green to brown were prepared by integrating inorganic tantalum octahedral cluster building blocks prepared via solid-state chemistry in a PMMA matrix. After the synthesis by the solid-state chemical reaction of the K4[{Ta6Bri12}Bra6] ternary halide, built-up from [{Ta6Bri12}Bra6]4- anionic building blocks, and potassium cations, the potassium cations were replaced by functional organic cations (Kat+) bearing a methacrylate function. The resulting intermediate, (Kat)2[{Ta6Bri12}Bra6], was then incorporated homogeneously by copolymerization with MMA into transparent PMMA matrices to form a brown transparent hybrid composite Ta@PMMAbrown. The color of the composites was tuned by controlling the charge and consequently the oxidation state of the cluster building block. Ta@PMMAgreen was obtained through the two-electron reduction of the [{Ta6Bri12}Bra6]2- building blocks from Ta@PMMAbrown in solution. Indeed, the control of the oxidation state of the Ta6 cluster inorganic building blocks occurred inside the copolymer, which not only allowed the tuning of the optical properties of the composite in the visible region but also allowed the tuning of its UV and NIR blocking properties.

Tailoring Anchoring Groups in Low‐Dimensional Organic Semiconductor‐Incorporated Perovskites

Low‐dimensional, organic semiconductor‐incorporated perovskites (OSiPs) are hybrid structures with functional organic cations intercalated between inorganic octahedron frameworks. They exhibit increased structural and compositional tunability, fascinating electronic properties, and enhanced stability for a wide range of applications. Currently, the interactions between the conjugated organic building blocks and the metal halide inorganic building blocks have not been fully investigated. Herein, a series of bithiophene‐based conjugated ligands with formamidinium, imidazolium, and benzimidazolium terminal groups to examine the influence of different anchoring groups on the crystal structures, phase formation, and device performances are reported. It is shown that the terminal groups of the ligands have significant effect on the interactions between ligands and octahedra in perovskites, thus determine the formation of the crystal structures. Only the 3D perovskite solar cells passivated by the ligands with imidazolium and benzimidazolium terminal groups exhibit enhancement in power conversion efficiencies as well as reduced hysteresis. A new strategy is provided for designing novel OSiPs structures and functionalities via tailoring the anchoring group.

Mobile Media Promotes Orientation of 2D/3D Hybrid Lead Halide Perovskite for Efficient Solar Cells.

2D/3D hybrid perovskites have shown great environmental stability for use as solar cells. Yet insulating organic cation spacers affect the formation of vertically oriented crystalline grains to hamper carrier transport. To date, the selection of cation spacers is limited because crystal growth kinetics should be strictly obeyed. Here, we adopted a mobile-media-assisted method to fabricate highly oriented 2D/3D hybrid perovskite films, wherein bulky molecules of (C(CH3)3NH3, TBA) are used as cation spacers. We found the compositional volatile salt promote the orientation of perovskite polycrystalline films with various compositions universally. And we obtained efficient solar cells with a photoelectric conversion efficiency (PCE) of 17.38% and a certified PCE of 19.30% based on 2D/3D hybrid perovskites an overall stoichiometry matching n = 10 and 20, respectively, which are one of the highest efficiencies among all 2D/3D hybrid perovskite based solar cells so far. These findings largely broaden the selection category of bulky cations and promote further exploration of more functional organic cations.

Relationship between changes in the exon-recognition machinery and SLC22A1 alternative splicing in hepatocellular carcinoma

Changes in the phenotype that characterizes cancer cells are partly due to altered processing of pre-mRNA by the spliceosome. We have previously reported that aberrant splicing plays an essential role in the impaired response of hepatocellular carcinoma (HCC) to sorafenib by reducing the expression of functional organic cation transporter type 1 (OCT1, gene SLC22A1) that constitutes the primary way for HCC cells to take up this and other drugs. The present study includes an in silico analysis of publicly available databases to investigate the relationship between alternative splicing of SLC22A1 pre-mRNA and the expression of genes involved in the exon-recognition machinery in HCC and adjacent non-tumor tissue. Using Taqman Low-Density Arrays, the findings were validated in 25 tumors that were resected without neoadjuvant chemotherapy. The results supported previous reports showing that there was a considerable degree of alternative splicing of SLC22A1 in adjacent non-tumor tissue, which was further increased in the tumor in a stage-unrelated manner. Splicing perturbation was associated with changes in the profile of proteins determining exon recognition. The results revealed the importance of using paired samples for splicing analysis in HCC and confirmed that aberrant splicing plays an essential role in the expression of functional OCT1. Changes in the exon recognition machinery may also affect the expression of other proteins in HCC. Moreover, these results pave the way to further investigations on the mechanistic bases of the relationship between the expression of spliceosome-associated genes and its repercussion on the appearance of alternative and aberrant splicing in HCC.

Two-Dimensional Organic-Inorganic Hybrid Perovskites: A New Platform for Optoelectronic Applications.

2D perovskites are recently attracting a significant amount of attention, mainly due to their improved stability compared with their 3D counterpart, e.g., the archetypical MAPbI3 . Interestingly, the first studies on 2D perovskites can be dated back to the 1980s. The most popular 2D perovskites have a general formula of (RNH3 )2 MAn -1 Mn X3 n +1 , where n represents the number of metal halide octahedrons between the insulating organic cation layers. The optoelectronic properties of 2D perovskites, e.g., band gap, are highly dependent on the thickness of the inorganic layers (i.e., the value of n). Herein, 2D perovskites are arbitrarily divided into three classes, strict 2D (n = 1), quasi-2D (n = 2-5), and quasi-3D (n > 5), and research progress is summarized following this classification. The majority of existing 2D perovskites only employ very simple organic cations (e.g., butyl ammonium or phenylethyl ammonium), which merely function as the supporting layer/insulating barrier to achieve the 2D structure. Thus, a particularly important research question is: can functional organic cations be designed for these 2D perovskites, where these functional organic cations would play an important role in dictating the optoelectronic properties of these organic-inorganic hybrid materials, leading to unique device performance or applications?

Efficient Room-Temperature Phosphorescence from Organic-Inorganic Hybrid Perovskites by Molecular Engineering.

Solution-processed organic-inorganic hybrid perovskites are promising emitters for next-generation optoelectronic devices. Multiple-colored, bright light emission is achieved by tuning their composition and structures. However, there is very little research on exploring optically active organic cations for hybrid perovskites. Here, unique room-temperature phosphorescence from hybrid perovskites is reported by employing novel organic cations. Efficient room-temperature phosphorescence is activated by designing a mixed-cation perovskite system to suppress nonradiative recombination. Multiple-colored phosphorescence is achieved by molecular design. Moreover, the emission lifetime can be tuned by varying the perovskite composition to achieve persistent luminescence. Efficient room-temperature phosphorescence is demonstrated in hybrid perovskites that originates from the triplet states of the organic cations, opening a new dimension to the further development of perovskite emitters with novel functional organic cations for versatile display applications.

Computational Design of Two-Dimensional Perovskites with Functional Organic Cations.

Two-dimensional (2D) halide perovskites are a class of materials in which 2D layers of perovskite are separated by large organic cations. Conventionally, the 2D perovskites incorporate organic cations as spacers, but these organic cations also offer a route to introduce specific functionality in the material. In this work, we demonstrate, by density functional theory calculations, that the introduction of electron withdrawing and electron donating molecules leads to the formation of localized states, either in the organic or the inorganic part. Furthermore, we show that the energy of the bands located in the organic and inorganic parts can be tuned independently. The organic cation levels can be tuned by changing the electron withdrawing/donating character, whereas the energy levels in the inorganic part can be modified by varying the number of inorganic perovskite layers. This opens a new window for the design of 2D perovskites with properties tuned for specific applications.

One-Dimensional Organic-Inorganic Hybrid Perovskite Incorporating Near-Infrared-Absorbing Cyanine Cations.

Hybrid perovskite crystals with organic and inorganic structural components are able to combine desirable properties from both classes of materials. Electronic interactions between the anionic inorganic framework and functional organic cations (such as chromophores or semiconductors) can give rise to unusual photophysical properties. Cyanine dyes are a well known class of cationic organic dyes with high extinction coefficients and tunable absorption maxima all over the visible and near-infrared spectrum. Here we present the synthesis and characterization of an original 1D hybrid perovskite composed of NIR-absorbing cyanine cations and polyanionic lead halide chains. This first demonstration of a cyanine-perovskite hybrid material is paving the way to a new class of compounds with great potential for applications in photonic devices.

Functional organic cation transporters mediate osteogenic response to metformin in human umbilical cord mesenchymal stromal cells

BackgroundCompelling evidence indicates that metformin, a low-cost and safe orally administered biguanide prescribed to millions of type 2 diabetics worldwide, induces the osteoblastic differentiation of mesenchymal stromal cells (MSCs) through the 5' adenosine monophosphate (AMP)-activated protein kinase (AMPK) pathway. As a highly hydrophilic cationic compound, metformin uptake is facilitated by cell membrane organic cation transporters (OCTs) of the solute carrier 22A gene family. We hypothesized that to effectively enhance osteogenic differentiation, and ultimately bone regeneration, metformin must gain access into functional OCT-expressing MSCs. MethodsData was obtained through immunoblotting, cellular uptake, mineralization and gene expression assays. ResultsWe demonstrate for the first time that functional OCTs are expressed in human-derived MSCs from umbilical cord Wharton's jelly, an inexhaustible source of nonembryonic MSCs with proven osteogenic potential. A clinically relevant concentration of metformin led to AMPK activation, enhanced mineralized nodule formation and increased expression of the osteogenic transcription factor Runt-related transcription factor 2 (RUNX2). Indeed, targeting OCT function through pharmacological and genetic approaches markedly blunted these responses. ConclusionsOur findings indicate that functional OCT expression in UC-MSCs is a biological prerequisite that facilitates the intracellular uptake of metformin to induce an osteogenic effect. Future pre-clinical studies are warranted to investigate whether the expression of functional OCTs may serve as a potential biomarker to predict osteogenic responses to metformin.

Metformin Enhances the Differentiation of Dental Pulp Cells into Odontoblasts by Activating AMPK Signaling

IntroductionMetformin is a first-line drug for treating type 2 diabetes that regulates the differentiation of mesenchymal stem cells. Its effects on human dental pulp cells (DPCs) remain unknown. This study aimed to investigate the effects of metformin on the proliferation and differentiation of DPCs. MethodsA live/dead viability assay kit was used to examine the effects of metformin on the cell viability of DPCs. Cell proliferation was analyzed using a cell counting kit (CCK-8; Dojindo, Tokyo, Japan). Levels of phosphorylated and unphosphorylated adenosine 5′-monophosphate-activated protein kinase (AMPK) were quantified by Western blot analysis in response to metformin and the AMPK signaling inhibitor Compound C (EMD Chemicals, San Diego, CA). The effects of Compound C on the metformin-induced odontoblast differentiation of DPCs were determined by alkaline phosphatase activity assay and von Kossa staining, and the expression of odontoblastic markers was evaluated by reverse-transcription polymerase chain reaction analysis. ResultsDPCs exhibited mesenchymal stem cell characteristics using flow cytometry. Different doses of metformin were shown to be cytocompatible with DPCs, yielding >90% cell viability. None of the concentrations of metformin up to 50 μmol/L affected cell proliferation. The Western blot assay showed that DPCs express functional organic cation transporter 1, a transmembrane protein that mediates the intracellular uptake of metformin. Metformin significantly activated the AMPK pathway in a dose-dependent manner. In addition, it stimulated alkaline phosphatase activity; enhanced mineralized nodule formation; and increased the expression of odontoblastic markers including dentin sialophosphoprotein, dentin matrix protein 1, runt-related transcription factor 2, and osteocalcin. Moreover, pretreatment with Compound C, a specific AMPK inhibitor, markedly reversed metformin-induced odontoblastic differentiation and cell mineralization. ConclusionsThis study shows that metformin can induce DPC differentiation and mineralization in an AMPK-dependent manner and that this well-tolerated antidiabetic drug has potential in regenerative endodontics as well as in other regenerative applications.

Metformin induces osteoblastic differentiation of human induced pluripotent stem cell-derived mesenchymal stem cells.

Metformin, a first-line antidiabetic drug used by millions of patients, has been shown to have potential osteogenic properties. The present study was performed to test the hypothesis that clinically relevant doses of metformin promote the osteogenic differentiation and mineralization of induced pluripotent stem cell-derived mesenchymal stem cells (iPSC-MSCs). iPSC-MSCs were treated with metformin (10 μm) to assess cell viability, osteogenic differentiation, mineralization and activation of the LKB1/AMP-activated protein kinase (AMPK) signalling pathway, a surrogate marker of metformin action. To determine its potential application in MSC-based bone and periodontal tissue engineering, iPSC-MSCs were also treated with metformin when seeded on to calcium phosphate cement (CPC) scaffolds. Immunoblotting and cellular uptake assays showed that iPSC-MSCs express functional organic cation transporter-1 (OCT-1), a transmembrane protein that mediates the intracellular uptake of metformin. Although metformin treatment did not impair iPSC-MSC viability, it significantly stimulated alkaline phosphatase activity, enhanced mineralized nodule formation and increased expression of osteogenic markers, including Runt-related transcription factor 2 (RUNX2) and osterix. Inhibition of LKB1 activity, a common upstream AMPK kinase, markedly reversed metformin-induced AMPK activation, RUNX2 expression and nuclear localization. Moreover, metformin substantially increased mineralized nodule formation of iPSC-MSC seeded on CPC scaffolds. Collectively, functional OCT-expressing iPSC-MSCs responded to metformin by inducing an osteogenic effect in part mediated by the LKB1/AMPK pathway. Considering the widespread use of metformin in diabetics, this work may lead to novel tissue-engineering platforms where autogenous OCT-expressing iPSC-MSCs might be used to enhance bone and periodontal regeneration in diabetic patients prescribed with daily doses of metformin.

Crystal Engineering of a Two‐Dimensional Lead‐Free Perovskite with Functional Organic Cations by Second‐Sphere Coordination

Invited for this month's cover are collaborators from the Istituto Italiano di Tecnologia, Nanyang Technological University, and Politecnico di Milano. The cover picture shows the 2 D layered nature of lead-free perovskite having a functional organic cation. Read the full text of the article at 10.1002/cplu.201600477.

Cover Picture: Crystal Engineering of a Two‐Dimensional Lead‐Free Perovskite with Functional Organic Cations by Second‐Sphere Coordination (ChemPlusChem 5/2017)

Cover Picture: Crystal Engineering of a Two‐Dimensional Lead‐Free Perovskite with Functional Organic Cations by Second‐Sphere Coordination (ChemPlusChem 5/2017)

Crystal Engineering of a Two-Dimensional Lead-Free Perovskite with Functional Organic Cations by Second-Sphere Coordination.

Hybrid lead halide perovskite semiconductors are attracting increasing attention for applications in optoelectronics. However, the high lead content calls for the development of greener and smarter alternatives through crystal engineering. This is extremely challenging since the use of functional cations often results in the disruption of the metal halide framework. Here we show the rational design of a new lead-free, copper-based hybrid perovskite following a second-sphere coordination approach. Our synthetic strategy allows the incorporation of an organic cationic fluorophore within the two-dimensional Cu-Cl framework of a layered copper perovskite. The functionalization results in a moisture-stable and near-UV/blue-emitting copper perovskite. Along with the possibility of extending the emission in the visible range by further synthetic design, our approach paves the way for the development of a new class of Pb-free perovskites with potential applications in solid-state lighting.

A New Type of Charge-Transfer Salts Based on Tetrathiafulvalene–Tetracarboxylate Coordination Polymers and Methyl Viologen

Although charge-transfer compounds based on tetrathiafulvalene (TTF) derivatives have been intensively studied, {[cation](n+)·[TTFs](n-)} ion pair charge-transfer (IPCT) salts have not been reported. The aim of this research is to introduce functional organic cations, such as photoactive methyl viologen (MV(2+)), into the negatively charged TTF-metal coordination framework to obtain this new type of IPCT complex. X-ray structural analysis of the four compounds (MV)2[Li4(L)2(H2O)6] (1), {(MV)(L)[Na2(H2O)8]·4H2O}n (2), {(MV)[Mn(L)(H2O)2]·2H2O}n (3), and {(MV)[Mn(L)(H2O)2]}n (4), reveals that the electron donor (D) TTF moiety and the electron acceptor (A) MV(2+) form a regular mixed-stack arrangement in alternating DADA fashion. The TTF moiety and the MV(2+) cation are essentially parallel stacked to form the column structures. The strong electrostatic interaction is a main force to shorten the distance between the cation and anion planes. Optical diffuse-reflection spectra indicate that charge transfer occurs in these complexes. The ESR and magnetic measurements confirm that there is strong charge-transfer-induced partial electron transfer. Compounds 2, 3, and 4 show an effective and repeatable photocurrent response. The current intensities of 3 and 4 are higher than that of 2, which reflects that the coordination center of the Mn(II) ion has a great effect on the increasing photocurrent response.

Cloning and Functional Characterization of a Rat Renal Organic Cation Transporter Isoform (rOCT1A)

Polyspecific organic cation transporters in the renal proximal tubule mediate the secretion of many clinically used drugs as well as endogenous metabolites. Recently, two organic cation transporters (rOCT1 and rOCT2) were cloned from rat kidney. In this study, we report the cloning and functional expression of an rOCT1 isoform, rOCT1A, from rat kidney. Genomic DNA cloning and sequencing demonstrated that rOCT1A is an alternatively spliced variant of rOCT1 with a deletion of 104 base pairs near the 5'-end. The uptake of [14C]tetraethylammonium (TEA) in oocytes injected with the cRNA-encoding rOCT1A was increased 16-fold over that in water-injected oocytes (29 +/- 2.8 pmol/oocyte/h versus 1.8 +/- 0.13 pmol/oocyte/h, mean +/- S.E., p < 0.05). [14C]TEA uptake in the cRNA-injected oocytes was saturable (Km = 42 +/- 11 microM) and was inhibited significantly by organic cations, including cimetidine and N1-methylnicotinamide. The amino acid sequence was deduced from the cDNA after examination of all three reading frames. Two overlapping open reading frames were found. Studies with synthetic constructs suggest that a functional organic cation transporter is encoded by the larger open reading frame. The larger open reading frame encodes a 430-amino acid protein (termed rOCT1A) that is 92% identical to rOCT1 and 57% identical to rOCT2. From hydropathy analysis, rOCT1A is predicted to have 10 transmembrane domains with both amino and carboxyl termini intracellular. RNase protection assays demonstrate the presence of rOCT1A mRNA transcripts in rat kidney cortex, medulla, and intestine. These studies demonstrate the presence of a functional, alternatively spliced organic cation transporter (rOCT1A) in rat kidney.