Full Field Of View Images Research Articles

Fluoroscopic Procedure-Room Scatter-Dose Reduction Using a Region-of-Interest (ROI) Attenuator.

During fluoroscopically-guided interventional (FGI) procedures, dose to the patient as well as the scatter dose to staff can be high. However, a significant dose reduction can be possible by using a region-of-interest (ROI) attenuator that reduces the x-ray intensity in the peripheral x-ray field while providing full field of view imaging. In this work, we investigated the magnitude of scatter dose reduction to staff made possible by using an ROI attenuator composed of 0.7 mm Cu with a central circular hole that projected a 5.4 cm ROI onto a Kyoto anthropomorphic phantom in the head, chest, and abdomen regions. A 150-cc ionization chamber was placed on a stand at a height of 150 cm (eye level) from the floor and 25 cm and 50 cm lateral distance from the gantry isocenter in a direction perpendicular to the table centerline to measure scatter dose at different positions along the length of the table. Scatter dose per entrance air kerma (mGy/Gy) was measured with and without the ROI attenuator and the percent scatter reduction for the ROI attenuator was determined as a function of staff positions, beam energy and gantry angulation. For head imaging, the measured percent dose reduction was 50%-65% and, for chest and abdomen imaging, the scatter dose reduction was 63%-72% at 50 cm lateral distance when using this ROI attenuator with about 20% beam transmission at 80 kVp. Overall, a considerable reduction of scattered radiation in the interventional room can be realized using an ROI attenuator.

Photon counting-energy integrating hybrid flat panel detector systems for image-guided interventions: an experimental proof-of-concept

Objective. Current C-arm x-ray systems equipped with scintillator-based flat panel detectors (FPDs) lack sufficient low-contrast detectability and spectral, high-resolution capabilities much desired for certain interventional procedures. Semiconductor-based direct-conversion photon counting detectors (PCDs) offer these imaging capabilities, although the cost of full field-of-view (FOV) PCD is still too high at the moment. The purpose of this work was to present a hybrid photon counting-energy integrating FPD design as a cost-effective solution to high-quality interventional imaging. Approach. In the proposed hybrid detector design, the central scintillator and thin-film transistor elements in the FPD are replaced with a semiconductor PCD module to upgrade the imaging capabilities of the C-arm system while preserving the full FOV coverage. The central PCD module can be used for high-quality 2D and 3D region-of-interest imaging with improved spatial- and temporal-resolution as well as spectral resolving capability. An experimental proof-of-concept was conducted using a 30 × 2.5 cm2 CdTe PCD and a 40 × 30 cm2 CsI(Tl)-aSi(H) FPD. Main results. Phantom and in vivo animal studies show (1) improved visualization of small stent wires in both 2D and 3D images due to the better spatial resolution of the PCD; (2) dual-energy angiography imaging capability by using the spectral PCD; (3) better conspicuity of small peripheral iodinated vessels (contrast-to-noise ratio improvement range: (29%, 151%)); (4) the central PCD outputs can be fused seamlessly with the surrounding scintillator detector outputs to provide full field imaging: A post-processing chain was developed by leveraging the PCD’s spectral information to match the image contrast of the PCD images to the surrounding scintillator detector, followed by spatial filtering of the PCD image to match noise texture and spatial resolution. Significance. The hybrid FPD design provides a cost-effective option to upgrade C-arm systems with spectral and ultra-high resolution capabilities without interfering with the clinical need for full FOV imaging.

Time-domain full-field optical coherence tomography (TD-FF-OCT) in ophthalmic imaging.

Ocular imaging plays an irreplaceable role in the evaluation of eye diseases. Developing cellular-resolution ophthalmic imaging technique for more accurate and effective diagnosis and pathogenesis analysis of ocular diseases is a hot topic in the cross-cutting areas of ophthalmology and imaging. Currently, ocular imaging with traditional optical coherence tomography (OCT) is limited in lateral resolution and thus can hardly resolve cellular structures. Conventional OCT technology obtains ultra-high resolution at the expense of a certain imaging range and cannot achieve full field of view imaging. In the early years, Time-domain full-field OCT (TD-FF-OCT) has been mainly used for ex vivo ophthalmic tissue studies, limited by the low speed and low full-well capacity of existing two-dimensional (2D) cameras. The recent improvements in system design opened new imaging possibilities for in vivo applications thanks to its distinctive optical properties of TD-FF-OCT such as a spatial resolution almost insensitive to aberrations, and the possibility to control the curvature of the optical slice. This review also attempts to look at the future directions of TD-FF-OCT evolution, for example, the potential transfer of the functional-imaging dynamic TD-FF-OCT from the ex vivo into in vivo use and its expected benefit in basic and clinical ophthalmic research. Through non-invasive, wide-field, and cellular-resolution imaging, TD-FF-OCT has great potential to be the next-generation imaging modality to improve our understanding of human eye physiology and pathology.

Axial scanning of dual focus to improve light sheet microscopy.

Axially swept light sheet microscopy (ASLM) is an emerging technique that enables isotropic, subcellular resolution imaging with high optical sectioning capability over a large field-of-view (FOV). Due to its versatility across a broad range of immersion media, it has been utilized to image specimens that may range from live cells to intact chemically cleared organs. However, because of its design, the performance of ASLM-based microscopes is impeded by a low detection signal and the maximum achievable frame-rate for full FOV imaging. Here we present a new optical concept that pushes the limits of ASLM further by scanning two staggered light sheets and simultaneously synchronizing the rolling shutter of a scientific camera. For a particular peak-illumination-intensity, this idea can make ASLMs image twice as fast without compromising the detection signal. Alternately, for a particular frame rate our method doubles the detection signal without requiring to double the peak-illumination-power, thereby offering a gentler illumination scheme compared to tradition single-focus ASLM. We demonstrate the performance of our instrument by imaging fluorescent beads and a PEGASOS cleared-tissue mouse brain.

Fluorescence strobo-stereoscopy for specular reflection-suppressed full field of view imaging

This paper introduces fluorescence strobo-stereoscopy (FSS) to suppress strong specular reflection and enable the full field of view (FFOV) 3D surface imaging while the part is rotating. Specular reflection off the target surface significantly degrades the image quality and becomes critical for highly reflective surface measurements. In FSS, the fluorescent dye-doped fluid applied on the machined surface is excited upon incident ultra-violet light and becomes a new light source by Stokes' Law. Thus, specular reflection off of smooth surface can be suppressed by separating the fluorescent light from the excitation light. The developed FSS comprises a pair of imaging cameras, spatial filters, and an excitation light source. As a result, FSS effectively rejected the specular reflection and improved the FFOV 3D surface image quality of the machined part by enhancing contrast in the rotating target surface. Such enhancements in 3D imaging allowed to identify manufacturing tolerance of the part and to detect the surface features. The axial and lateral accuracy errors of FSS were 2.3% and 1.4% with the target size of 4.07 mm and 0.215 mm, respectively. A whole view reconstruction of the cylindrical target sample was performed, and the corresponding cylindricity and diameter deviation were assessed. The fluid media effect and the target surface quality effect were discussed.

Aliasing-free reduced field-of-view parallel imaging.

To reconstruct aliasing-free full field-of-view (FOV) images for reduced FOV (rFOV) parallel imaging (PI) with Cartesian and Wave sampling, which suffers from aliasing artifacts using existing PI methods. The sensitivity encoding method (SENSE) was extended to the Soft-SENSE models supporting multiple-set coil sensitivity maps (CSM) and point spread functions (PSF) for Cartesian and Wave sampled rFOV PI, respectively. The multiple-set CSM and PSF were created from full FOV CSM and PSF according to the image folding process induced by rFOV sampling. The Soft-SENSE reconstructions could be solved by the same algorithms for the conventional full FOV SENSE reconstruction. Soft-SENSE using multiple-set full FOV CSM and PSF successfully reconstruct aliasing-free full FOV image from rFOV PI data with Cartesian and Wave sampling. The proposed rFOV PI enables flexible control of the aliasing and achieves comparable geometry factors as the standard full FOV PI with the same net acceleration factor. Reduced FOV PI improves the computational efficiency of iterative compressed sensing (CS) and PI reconstruction, especially for high-resolution volumetric imaging, thanks to the reduced fast Fourier transform (FFT) size. Moreover, rFOV PI reconstruction provides a potential alternative to the phase oversampling for the FOV aliasing problem. The proposed Soft-SENSE using full FOV CSM and PSF could reconstruct aliasing-free full FOV image for rFOV PI, and make it a viable solution enabling more flexible PI acceleration and effectively improving the computational efficiency of iterative CSPI reconstruction.

Meta-objective with sub-micrometer resolution for microendoscopes

Microendoscopes are vital for disease detection and clinical diagnosis. The essential issue for microendoscopes is to achieve minimally invasive and high-resolution observations of soft tissue structures inside deep body cavities. Obviously, the microscope objective is a must with the capabilities of both high lateral resolution in a wide field of view (FOV) and miniaturization in size. Here, we propose a meta-objective, i.e., microscope objective based on cascaded metalenses. The two metalenses, with the optical diameters of 400 μm and 180 μm, respectively, are mounted on both sides of a 500-μm-thick silica film. Sub-micrometer lateral resolution reaches as high as 775 nm in such a naked meta-objective, with monochromatic aberration correction in a 125 μm full FOV and near diffraction limit imaging. Combined with a fiber bundle microscope system, the single cell contour of biological tissue (e.g., water lily leaf) can be clearly observed, compared to the indistinguishable features in other conventional lens-based fiber bundle systems, such as plano–convex and gradient refractive index (GRIN) cases.

Single full-FOV reconstruction Fourier ptychographic microscopy.

Fourier ptychographic microscopy (FPM) is a recently developed computational imaging technique that has high-resolution and wide field-of-view (FOV). FPM bypasses the NA limit of the system by stitching a number of variable-illuminated measured images in Fourier space. On the basis of the wide FOV of the low NA objective, the high-resolution image with a wide FOV can be reconstructed through the phase recovery algorithm. However, the high-resolution reconstruction images are affected by the LED array point light source. The results are: (1) the intensities collected by the sample are severely declined when edge LEDs illuminate the sample; (2) the multiple reconstructions are caused by wavevectors inconsistency for the full FOV images. Here, we propose a new lighting scheme termed full FOV Fourier ptychographic microscopy (F3PM). By combining the LED array and telecentric lens, the method can provide plane waves with different angles while maintaining uniform intensity. Benefiting from the telecentric performance and f‒θ property of the telecentric lens, the system stability is improved and the relationship between the position of LED and its illumination angle is simplified. The excellent plane wave provided by the telecentric lens guarantees the same wavevector in the full FOV, and we use this wavevector to reconstruct the full FOV during one time. The area and diameter of the single reconstruction FOV reached 14.6mm 2 and 5.4 mm, respectively, and the diameter is very close to the field number (5.5 mm) of the 4× objective. Compared with the traditional FPM, we have increased the diameter of FOV in a single reconstruction by ∼ 10 times, eliminating the complicated steps of computational redundancy and image stitching.

SERIAL transmit – parallel receive (STxPRx) MR imaging produces acceptable proton image uniformity without compromising field of view or SAR guidelines for human neuroimaging at 9.4 Tesla

PurposeNon-uniform B1+ excitation and high specific absorption rates (SAR) compromise proton MR imaging of human brain at 9.4 T (400.5 MHz). By combining a transmit/receive surface coil array using serial transmission of individual coils with a total generalized variation reconstruction of images from all coils, acceptable quality human brain imaging is demonstrated. MethodsB0 is shimmed using sodium MR imaging (105.4 MHz) with a birdcage coil. Proton MR imaging is performed with an excitation/receive array of surface coils. The modified FLASH pulse sequence transmits serially across each coil within the array thereby distributing SAR in time and space. All coils operate in receive mode. Although the excitation profile of each transmit coil is non-uniform, the sensitivity profile estimated from the non-transmit receive coils provides an acceptable sensitivity correction. Signals from all coils are combined in a total generalized variation (TGV) reconstruction to provide a full field of view image at maximum signal to noise (SNR) performance. ResultsHigh-resolution images across the human head are demonstrated with acceptable uniformity and SNR. ConclusionProton MR imaging of the human brain is possible with acceptable uniformity at low SAR at 9.4 Tesla using this serial excitation and parallel reception strategy with TGV reconstruction.

Full field-of-view digital lens-free holography for weak-scattering objects based on grating modulation.

Grating-based single-shot digital lens-free holography with spatial spectral multiplexing is proposed to realize full field-of-view (FOV) imaging for weak-scattering objects. Multiple object waves are generated by a one-dimensional grating that is placed in near contact with the object to avoid the cross talk among different diffraction orders during reconstruction. A multiplexed off-axis hologram is created by interference between the object waves and reference wave and captured by an image sensor in one shot. Multiple imaging areas corresponding to the captured object waves can be simultaneously retrieved during reconstruction. A formula which guarantees full FOV imaging without cross talk or information loss is presented. The imaging experiments of a USAF resolution target are presented to demonstrate the feasibility of this method.

P2.13-023 Lung Cancer Risk and Eligibility for Lung Cancer Screening in Patients Undergoing Computed Tomography Coronary Angiography

Computed Tomography Coronary Angiography (CTCA) is frequently performed for non-invasive coronary artery assessment. Extracardiac findings are frequent, with indeterminate pulmonary nodules the commonest incidental finding. Given the established efficacy of lung cancer screening with low dose CT (LDCT), CTCA has been suggested to be an opportunity for “opportunistic” lung cancer screening. This rationale has been used to justify full field of view imaging, despite limited field of view significantly reducing prevalence of nodules detected and therefore reduce downstream healthcare costs.

Reduced field of view single-shot spiral perfusion imaging.

To develop a single-shot spiral perfusion pulse sequence with outer-volume suppression (OVS) to achieve whole-heart coverage with a short temporal footprint of 10 ms per slice location. A highly accelerated single-shot variable density spiral pulse sequence with an integrated OVS module for reduced field of view (rFOV) perfusion imaging with 2 mm spatial resolution was developed and evaluated in simulations, phantom experiments and in clinical patients with (n = 8) or without (n = 8) OVS. Images were reconstructed by block low-rank sparsity with motion guidance (BLOSM) and graded by two cardiologists on a 5-point scale (1, excellent; 5, poor). Simulation and phantom results showed that OVS effectively suppressed the signal outside the desired field of view (FOV). Clinical patient data demonstrated high quality perfusion images with rFOV. The average image quality scores of full FOV cases and rFOV cases were 3.1 ± 0.64 and 2.3 ± 0.46, respectively, (P = 0.02) from cardiologist 1 and 2.5 ± 0.54 and 1.8 ± 0.47, respectively, (P = 0.04) from cardiologist 2, showing superior image quality for the rFOV images compared with the full FOV images. A single-shot spiral perfusion sequence that uses OVS and BLOSM performs perfusion imaging with a very short temporal footprint per image supporting whole-heart coverage with good image quality. Magn Reson Med 79:208-216, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

Synchronised multi-scale image analysis of soil deformations

New apparatus and techniques for performing synchronised multi-scale particle image velocimetry or digital image correlation (PIV/DIC) soil deformation measurements have been developed. A central camera records a full field of view (FoV) of the model capturing the ‘macro’ deformation mechanism and the boundaries of the model. Simultaneously, an adjacent slave camera records a subset of the full FoV capturing the ‘micro’ soil response in a region of special interest, such as under the corner of footing. The ‘micro’ FoV images have higher resolution in terms of particle/pixel size ratio (d/p), resulting in the ability to measure localised deformations that are invisible to lower resolution images. Recommendations are made with respect to appropriate subset size and spacing for high-resolution images. A photogrammetric correction process requiring a small number of static control points is proposed and the performance is validated against a conventional photogrammetric calibration utilising a large array of static control points. Lastly, results from a validation experiment are presented comparing the PIV/DIC output from the ‘macro’ and ‘micro’ FoV, illustrating that: (a) the photogrammetric correction method proposed is robust and (b) that there has been an improvement in spatial resolution of the strain measurements that can be obtained through the ‘micro’ FoV camera.

Image domain propeller fast spin echo

A new pulse sequence for high-resolution T2-weighted (T2-w) imaging is proposed — image domain propeller fast spin echo (iProp-FSE). Similar to the T2-w PROPELLER sequence, iProp-FSE acquires data in a segmented fashion, as blades that are acquired in multiple TRs. However, the iProp-FSE blades are formed in the image domain instead of in the k-space domain. Each iProp-FSE blade resembles a single-shot fast spin echo (SSFSE) sequence with a very narrow phase-encoding field of view (FOV), after which N rotated blade replicas yield the final full circular FOV. Our method of combining the image domain blade data to a full FOV image is detailed, and optimal choices of phase-encoding FOVs and receiver bandwidths were evaluated on phantom and volunteers. The results suggest that a phase FOV of 15–20%, a receiver bandwidth of ±32–63 kHz and a subsequent readout time of about 300 ms provide a good tradeoff between signal-to-noise ratio (SNR) efficiency and T2 blurring. Comparisons between iProp-FSE, Cartesian FSE and PROPELLER were made on single-slice axial brain data, showing similar T2-w tissue contrast and SNR with great anatomical conspicuity at similar scan times — without colored noise or streaks from motion. A new slice interleaving order is also proposed to improve the multislice capabilities of iProp-FSE.

Full Field Image Reconstruction Is Suitable for High-Pitch Dual-Source Computed Tomography

The field of view (FOV) in high-pitch dual-source computed tomography (DSCT) is limited by the size of the second detector. The goal of this study was to develop and evaluate a full FOV image reconstruction technique for high-pitch DSCT. For reconstruction beyond the FOV of the second detector, raw data of the second system were extended to the full dimensions of the first system, using the partly existing data of the first system in combination with a very smooth transition weight function. During the weighted filtered backprojection, the data of the second system were applied with an additional weighting factor. This method was tested for different pitch values from 1.5 to 3.5 on a simulated phantom and on 25 high-pitch DSCT data sets acquired at pitch values of 1.6, 2.0, 2.5, 2.8, and 3.0. Images were reconstructed with FOV sizes of 260 × 260 and 500 × 500 mm. Image quality was assessed by 2 radiologists using a 5-point Likert scale and analyzed with repeated-measure analysis of variance. In phantom and patient data, full FOV image quality depended on pitch. Where complete projection data from both tube-detector systems were available, image quality was unaffected by pitch changes. Full FOV image quality was not compromised at pitch values of 1.6 and remained fully diagnostic up to a pitch of 2.0. At higher pitch values, there was an increasing difference in image quality between limited and full FOV images (P = 0.0097). With this new image reconstruction technique, full FOV image reconstruction can be used up to a pitch of 2.0.

Clinical demand for chest/abdomen/pelvis anatomy following thoracic or lumbar spine CT

The purpose of this study is to determine how often CT is repeated to obtain chest/abdomen/pelvis data outside the reconstructed field of view (FOV) on a prior spine CT. Radiology records of 1,239 consecutive thoracic and lumbar spine CT exams of 1,025 patients from January 1, 2006 to December 31, 2008 were retrospectively reviewed to identify patients who subsequently had CT studies of the chest, abdomen, and/or pelvis. The CT data were also evaluated for contrast enhancement, slice thickness, radiation dose, and reason for subsequent CT exam. Over 3 years, 290 of the 1,239 (24%) spine CT exams were followed by CT of the same anatomic region to evaluate extraspinal anatomy. The use or nonuse of contrast in these follow-up studies was the same as the preceding spine study in 91 cases, which were repeated on the same day (n = 37), within 7 days (n = 19), within 8-30 days (n = 15), or after 30 days (n = 20). Fourteen of 25 (56%) T spine CTs and 34 of 52 (65%) L spine CTs without contrast were followed by a chest CT or abdomen/pelvis CT without contrast within 7 days, respectively. Among 31 pediatric exams, 6 of 31 (19%) spine CTs were followed by a CT of the same anatomic region, all within 7 days. Reconstructing full FOV images of spine CT scans in addition to the standard coned down spine FOV may reduce redundant CT imaging and radiation dose.

Reduced field of view MRI with rapid, B1‐robust outer volume suppression

MRI scans are inefficient when the size of the anatomy under investigation is small relative to the subject's full extent. The field of view must be expanded, and acquisition times accordingly prolonged. Shorter scans are feasible with reduced field of view imaging (rFOV) using outer volume suppression (OVS), a magnetization preparation sequence that attenuates signal outside a region of interest (ROI). This work presents a new OVS sequence with a cylindrical ROI, short duration, and improved tolerance for B(1)+ inhomogeneity. The sequence consists of a nonselective adiabatic tipdown pulse, which provides B(1)+-robust signal suppression, and a fast 2D spiral cylindrical tipback pulse. Analysis of the Bloch equations with transverse initial magnetization reveals a conjugate symmetric constraint for tipback pulses with small flip angles. This property is exploited to achieve two-shot performance from the single-shot tipback pulse. The OVS sequence is validated in phantoms and in vivo with multislice spiral imaging at 3 T. The relative signal-to-noise ratio efficiency of the proposed sequence was 98% in a phantom and 75-90% in vivo. The effectiveness is demonstrated with cardiovascular rFOV imaging, which exhibits improved resolution and reduced artifacts compared to conventional, full field of view imaging.

Comparison on different insects' wing displacements using high speed digital holographic interferometry

In-flight insect wing motion behavior depends on a wide variety of conditions. They have a complex structural system and what seems to be a rather complicated motion. Researchers in many fields have endeavoured to study and reproduce these wing movements with the aim to apply the gained knowledge in their fields and for the benefit of avionic technological improvements and insect migration studies, among many other themes. The study of in-flight insect wing motion and its measurement is a relevant issue to understand and reproduce its functionality. Being capable of measuring the wing flapping using optical noninvasive methods adds scientific and technological value to the fundamental research in the area. Four different types of butterflies found widely in Mexico's forests are used to compare their wing flapping mechanisms. An out-of-plane digital holographic interferometry system is used to detect and measure its wingmicro deformations. Displacement changes from in vivo flapping wings are registered with a CMOS high speed camera yielding full field of view images depicting these insects' wing motion. The results have a resolution in the scale of hundreds of nanometers over the entire wing surface.

Regionally Optimized Reconstruction for Partially Parallel Imaging in MRI Applications

Based on the conventional SENSE and GRAPPA, a regionally optimized reconstruction method is developed for reduced noise and artifact level in partially parallel imaging. In this regionally optimized reconstruction, the field-of-view (FOV) is divided into a number of small regions. Over every small region, the noise amplification and data fitting error can be balanced and minimized locally by taking advantage of spatial correlation of neighboring pixels in reconstruction. The full FOV image can be obtained by "region-by-region" reconstruction. Compared with the conventional SENSE, this method gives better performance in the regions where there are pixels with high SENSE g-factors. Compared with GRAPPA, it is better in the regions where all the pixels have low SENSE g-factors. In this work, we applied the regionally optimized reconstruction in four important imaging experiments: brain, spine, breast, and cardiac. It was demonstrated in these experiments that the overall image quality using this regionally optimized reconstruction is better than that using the conventional SENSE or GRAPPA.

Fast projective carotid MR angiography using arterial spin‐labeled balanced SSFP

To determine whether pulsed arterial spin-labeled (pulsed ASL) balanced steady-state free precession (bSSFP) imaging allows for rapid projective depiction of the carotid arteries without electrocardiographic (ECG) gating. The carotid arteries of six volunteers were scanned at 1.5 T using an ASL two-dimensional bSSFP sequence. Three configurations were tested, with and without ECG gating: (a) full field-of-view (FOV) acquisition (scan time=48 s), (b) full-FOV acquisition with parallel acceleration of 2 (24 s), and sequence C (half-FOV acquisition (24 s). Vessel-to-background contrast-to-noise ratios (CNRs) and vessel lengths were compared between sequence configurations. Vessel caliber measurements were compared with those obtained from three-dimensional time-of-flight (TOF) angiography. The carotid arteries were seen over extensive lengths with ASL two-dimensional bSSFP. Projected vessel length and vessel-to-background CNR did not differ with ECG gating (P=NS). Nonaccelerated full-FOV and half-FOV scans provided larger apparent vessel-to-background CNR and slightly longer vessel lengths than the parallel-accelerated scans (P<0.01). Carotid diameter measurements were in agreement with those obtained from three-dimensional TOF (intraclass correlation coefficient=0.810; P<0.001). pulsed ASL bSSFP is a fast technique for projective carotid angiography that may not require ECG gating. Acquisition time may be decreased with reduced FOV or parallel imaging strategies.