Full Dynamic Capabilities Research Articles

A new artificial ecosystem-based optimization integrated with Nelder-Mead method for PID controller design of buck converter

Over the last decade, there has been a constant development in control techniques for DC-DC power converters which can be classified as linear and nonlinear. Researchers focus on obtaining maximum efficiency using linear control techniques to avoid complexity although nonlinear control techniques may achieve full dynamic capabilities of the converter. This paper has a similar purpose in which a novel hybrid metaheuristic optimization algorithm (AEONM) is proposed to design an optimal PID controller for DC-DC buck converter’s output voltage regulation. The AEONM employs artificial ecosystem-based optimization (AEO) algorithm with Nelder-Mead (NM) simplex method to ensure optimal PID controller parameters are efficiently tuned to control output voltage of the buck converter. Initial evaluations are performed on benchmark functions. Then, the performance of AEONM-based PID is validated through comparative results of statistical boxplot, non-parametric test, transient response, frequency response, time-domain integral-error-performance indices, disturbance rejection and robustness using AEO, particle swarm optimization and differential evolution. A comparative performance analysis of transient and frequency responses is also performed against simulated annealing, whale optimization and genetic algorithms for further performance assessment. The comparisons have shown the proposed hybrid AEONM algorithm to be superior in terms of enhancing the buck converter’s transient and frequency responses.

Industrial challenges in ion beam processing and metrology in the 3D era

Ion beam mechanisms present in plasma doping have been investigated by comparing SIMS measurements of Ge implants into deposited layers of As on Si wafers to planar dynamic ion beam models of the implants and SIMS analyses. Industrial devices are overcoming the limitations of lateral scaling by using the vertical direction. The same modelling approach would be valuable for interpreting 1.5D SIMS analyses of plasma doping of 3D-NAND test structures but 3D dynamic codes do not yet have all the capabilities to allow this. The required features are being developed within a static 3D code, TRI3DSTP, which has been used to qualitatively explain the good uniformity of a P plasma doping process and indicate where more quantitative explanations will be possible once the full dynamic capabilities are available.

Fast digital hologram generation and adaptive force measurement in liquid-crystal-display-based holographic tweezers

Computer-generated holograms in conjunction with spatial light modulators (SLMs) offer a way to dynamically generate holograms that are adapted to specific tasks. To use the full dynamic capability of the SLM, the hologram computation should be very fast. We present a method that uses the highly parallel architecture of a consumer graphics board to compute analytical holograms in video real time. A precice characterization of the SLM (Holoeye LC-R-2500) and the adaption of its settings to our near-infrared application is necessary to guarantee an efficient hologram reconstruction. The benefits of a fast computation of adapted holograms and the application of an efficient SLM are demonstrated by measuring the trapping forces of holographic tweezers.

The application of electron beam delivery using dose rate variation and dynamic couch motion in conformal treatment of the cranial-spinal axis

Radiation therapy to the cranial-spinal axis is typically targeted to the spinal cord and to the cerebrospinal fluid (CSF) in the subarachnoid space adjacent to the spinal cord and brain. Standard techniques employed in the treatment of the whole central nervous system do little to compensate for the varying depths of spinal cord along the length of the spinal field. Lateral simulation films, sagittal magnetic resonance imaging (MRI), or computerized tomography (CT) are used to estimate an average prescription depth for treatment along the spine field. However, due to the varying depth of the target along the spinal axis, even with the use of physical compensators, there can be considerable dose inhomogeneity along the spine field. With the advent of treatment machines that have full dynamic capabilities, a technique has been devised that will allow for more conformal dose distribution along the full length of the spinal field. This project simulates this technique utilizing computer-controlled couch motion to deliver multiple small electron beams of differing energies and intensities. CT planning determines target depth along the entire spine volume. The ability to conform dose along the complete length of the treatment field is investigated through the application of superpositioning of the fields as energies and intensities change. The positioning of each beam is registered with the treatment couch dynamic motion. This allows for 1 setup in the treatment room rather than multiple setups for each treatment position, which would have been previously required. Dose-volume histograms are utilized to evaluate the dose delivered to structures in the beam exit region. This technique will allow for precise localization and delivery of a homogeneous dose to the entire CSF space.

Fully Dynamic Point Location in a Monotone Subdivision

In this paper a dynamic technique for locating a point in a monotone planar subdivision, whose current number of vertices is n, is presented. The (complete set of) update operations are insertion of a point on an edge and of a chain of edges between two vertices, and their reverse operations. The data structure uses space $O(n)$. The query time is $O(\log ^2 n)$, the time for insertion/deletion of a point is $O(\log n)$, and the time for insertion/deletion of a chain with k edges is $O(\log ^2 n + k)$, all worst-case. The technique is conceptually a special case of the chain method of Lee and Preparata and uses the same query algorithm. The emergence of full dynamic capabilities is afforded by a subtle choice of the chain set (separators), which induces a total order on the set of regions of the planar subdivision.