Frontier Molecular Orbital Levels Research Articles

Bis(benzoselenadiazol)ethane: A π‐Extended Acceptor‐Dimeric Unit for Ambipolar Polymer Transistors with Hole and Electron Mobilities Exceeding 10 cm2 V−1 s−1

AbstractThe lack of ambipolar polymers with balanced hole (μh) and electron mobilities (μe) >10 cm2 V−1 s−1 is the main bottleneck for developing organic integrated circuits. Herein, we show the design and synthesis of a π‐extended selenium‐containing acceptor‐dimeric unit, namely benzo[c][1,2,5]selenadiazol‐4‐yl)ethane (BBSeE), to address this dilemma. In comparison to its sulfur‐counterpart, BBSeE demonstrates enlarged co‐planarity, selective noncovalent interactions, polarized Se−N bond, and higher electron affinity. The successful stannylation of BBSeE offers a great opportunity to access acceptor‐acceptor copolymer pN‐BBSeE, which shows a narrower band gap, lower‐lying lowest unoccupied molecular orbital level (−4.05 eV), and a higher degree of backbone planarity. Consequently, the pN‐BBSeE‐based organic transistors display an ideally balanced ambipolar transporting property with μh and μe of 10.65 and 10.72 cm2 V−1 s−1, respectively. To the best of our knowledge, the simultaneous μh/μe values >10.0 cm2 V−1 s−1 are the best performances ever reported for ambipolar polymers. In addition, pN‐BBSeE shows an excellent shelf‐storage stability, retaining over 85 % of the initial mobility values after two months storage. Our study demonstrates the π‐extended acceptor‐dimeric BBSeE is a promising acceptor building block for constructing high‐performance ambipolar polymers applied in next‐generation organic integrated circuit.

New bithiophene-based molecules as hole transporting materials for perovskite solar cells and or as donor for organic solar cells

DFT and TDDFT approaches were used to design three (T16,17,18) molecules based on 4,4′-dimethoxy-2,2′-bithiophene core to explore the influence of substitution of triphenylamine (TPA) fragment by methoxy groups, and introduction of azomethine π-bridges on the optoelectronic properties of hole transporting materials for perovskite solar cells (PSCs) or as donor for organic solar cells (OSCs). To shed light on the efficiency, stability, and solubility several physicochemical parameters were computed in dichloromethane solvent. All designed molecules show appropriate frontier molecular orbital levels, which facilitates effective hole transfer from the perovskite materials to the HTMs in the hole-transporting layer in PSC devices. They all show good efficiency and pore-fillings and are stable and soluble in dichloromethane. Electron-hole pairs can easily dissociate into free charge carriers, especially for T16 and T17; consequently, improve short-circuit current densities and facilitate hole transport. It is also advised to use T18 which includes azomethine bridges as a donor with a non-fullerene Y6 acceptor to create effective OSCs because it exhibits high open circuit voltage, fill factor and low gap energy.

Electron-transporting boron-doped polycyclic aromatic hydrocarbons: Facile synthesis and heteroatom doping positions-modulated optoelectronic properties

While heteroatom doping serves as a powerful strategy for devising novel polycyclic aromatic hydrocarbons (PAHs), the further fine-tuning of optoelectronic properties via the precisely altering of doping patterns remains a challenge. Herein, by changing the doping positions of heteroatoms in a diindenopyrene skeleton, we report two isomeric boron, sulfur-embedded PAHs, named Anti-B2S2 and Syn-B2S2, as electron transporting semiconductors. Detailed structure-property relationship studies revealed that the varied heteroatom positions not only change their physicochemical properties, but also largely affect their solid-state packing modes and Lewis base-triggered photophysical responses. With their low-lying frontier molecular orbital levels, n-type characteristics with electron mobilities up to 1.5 × 10−3 cm2 V−1 s−1 were achieved in solution-processed organic field-effect transistors. Our work revealed the critical role of controlling heteroatom doping patterns for designing advanced PAHs.

Biselenophene Imide: Enabling Polymer Acceptor with High Electron Mobility for High‐Performance All‐Polymer Solar Cells

AbstractThe shortage of narrow band gap polymer acceptors with high electron mobility is the major bottleneck for developing efficient all‐polymer solar cells (all‐PSCs). Herein, we synthesize a distannylated electron‐deficient biselenophene imide monomer (BSeI‐Tin) with high purity/reactivity, affording an excellent chance to access acceptor–acceptor (A–A) type polymer acceptors. Copolymerizing BSeI‐Tin with dibrominated monomer Y5‐Br, the resulting A–A polymer PY5‐BSeI shows a higher molecular weight, narrower band gap, deeper‐lying frontier molecular orbital levels and larger electron mobility than the donor–acceptor type counterpart PY5‐BSe. Consequently, the PY5‐BSeI‐based all‐PSCs deliver a remarkable efficiency of 17.77 % with a high short‐circuit current of 24.93 mA cm−2 and fill factor of 75.83 %. This efficiency is much higher than that (10.70 %) of the PY5‐BSe‐based devices. Our study demonstrates that BSeI is a promising building block for constructing high‐performance polymer acceptors and stannylation of electron‐deficient building blocks offers an excellent approach to developing A–A type polymers for all‐PSCs and even beyond.

Biselenophene Imide: Enabling Polymer Acceptor with High Electron Mobility for High-Performance All-Polymer Solar Cells.

The shortage of narrow band gap polymer acceptors with high electron mobility is the major bottleneck for developing efficient all-polymer solar cells (all-PSCs). Herein, we synthesize a distannylated electron-deficient biselenophene imide monomer (BSeI-Tin) with high purity/reactivity, affording an excellent chance to access acceptor-acceptor (A-A) type polymer acceptors. Copolymerizing BSeI-Tin with dibrominated monomer Y5-Br, the resulting A-A polymer PY5-BSeI shows a higher molecular weight, narrower band gap, deeper-lying frontier molecular orbital levels and larger electron mobility than the donor-acceptor type counterpart PY5-BSe. Consequently, the PY5-BSeI-based all-PSCs deliver a remarkable efficiency of 17.77 % with a high short-circuit current of 24.93 mA cm-2 and fill factor of 75.83 %. This efficiency is much higher than that (10.70 %) of the PY5-BSe-based devices. Our study demonstrates that BSeI is a promising building block for constructing high-performance polymer acceptors and stannylation of electron-deficient building blocks offers an excellent approach to developing A-A type polymers for all-PSCs and even beyond.

Cyano-Functionalized Fused Bithiophene Imide Dimer-Based n-Type polymers for High-Performance Organic Thermoelectrics.

Doped n-type polymers usually exhibit low electrical conductivities and thermoelectric power factors (PFs), restricting the development of high-performance p-n junction-based organic thermoelectrics (OTEs). Herein we report the design and synthesis of a new cyano-functionalized fused bithiophene imide dimer (f-BTI2), CNI2, which synergistically combines the advantages of both cyano and imide functionalities, thus leading to substantially higher electron deficiency than the parent f-BTI2. On the basis of this novel building block, a series of n-type donor-acceptor and acceptor-acceptor polymers were successfully synthesized, all of which show good solubility, deep-lying frontier molecular orbital levels, and favorable polymer chain orientation. Among them, the acceptor-acceptor polymer PCNI2-BTI delivers an excellent electrcial conductivity up to 150.2 S cm-1 and a highest PF of 110.3 μW m-1 K-2 in n-type OTEs, attributed to the optimized polymer electronic properties and film morphology with improved molecular packing and higher crystallinity assisted by solution-shearing technology. The PF value is the record of n-type polymers for OTEs to date. This work demonstrates a facile approach to designing high-performance n-type polymers and fabricating high-quality films for OTE applications. This article is protected by copyright. All rights reserved.

New D−A propeller system with pyridine core for co-sensitization in dye sensitized solar cells

In this study, a propeller-type molecule with a pyridine core (D) was designed and synthesized. Photophysical and electrochemical studies, along with theoretical DFT simulations, indicated that the molecule has suitable light absorption properties and frontier molecular orbital levels for usage as a sensitizer in dye-sensitized solar cells (DSSCs). Meanwhile, the standard dye Z-907 was chosen to investigate the effect of the synthesized molecule as a co-adsorbent dye on DSSCs. Intriguingly, when compared to the D and Z907-based devices, the performance of the co-sensitized Z907 + D cell exhibited an increase in photocurrent (JSC), photo-voltage (VOC), and, as a result, total power conversion efficiency (PCE).

S-Indacene Revisited: Modular Synthesis and Modulation of Structures and Molecular Orbitals of Hexaaryl Derivatives

Though s-indacene is an intriguing antiaromatic hydrocarbon of 12 π-electrons, it has been underrepresented due to the lack of efficient and versatile methods to prepare stable derivatives. Herein we report a concise and modular synthetic method for hexaaryl-s-indacene derivatives bearing electron-donating/-accepting groups at specific positions to furnish C2h-, D2h-, and C2v-symmetric substitution patterns. We also report the effects of substituents on their molecular structures, frontier molecular orbital (MO) levels, and magnetically induced ring current tropicities. Both theoretical calculations and X-ray structure analyses indicate that the derivatives of the C2h-substitution pattern adopt different C2h structures with significant bond length alternation depending on the electronic property of the substituents. Due to the nonuniform distribution of the frontier MOs, their energy levels are selectively modulated by the electron-donating substituents. This leads to the inversion of the HOMO and HOMO-1 sequences with respect to those of the intrinsic s-indacene as theoretically predicted and experimentally proven by the absorption spectra at visible and near-infrared regions. The NICS values and the 1H NMR chemical shifts of the s-indacene derivatives indicate their weak antiaromaticity. The different tropicities are explained by the modulation of the HOMO and HOMO-1 levels. In addition, for the hexaxylyl derivative, weak fluorescence from the S2 excited state was detected due to the large energy gap between the S1 and S2 states. Notably, an organic field-effect transistor (OFET) fabricated using the hexaxylyl derivative exhibited moderate hole carrier mobility, a result which opens the door for optoelectronic applications of s-indacene derivatives.

Fluorinated Dihydropentalene-1,4-Dione: A Strong Electron-Accepting Unit with Organic Semiconductor Characteristics.

The development of electron-accepting units is of significant importance because the construction of donor (D)-acceptor (A) configurations is an effective strategy for tuning the electronic properties of π-conjugated systems. Although doubly fused pentagons represented by diketopyrrolopyrrole (DPP) have been used as an effective electron-accepting unit, the relatively high-lying frontier molecular orbital levels (FMOs) leave room for further improvement. We report herein the synthesis of a fluorinated dihydropentalene-1,4-dione (FPD) derivative as a strong electron-accepting unit and the development of D-A-D π-extended molecules. X-ray analyses revealed that the presence of fluorine atoms contributed to the formation of high planar structures and slipped-stacked packing. Electrochemical measurements indicated that the FPD derivatives showed relatively lower FMO energy levels than the corresponding DPP-containing derivatives. The D-A-D molecule based on terthiophene and FPD showed semiconducting responses. This study demonstrates that the FPD unit can function as a new acceptor unit for organic semiconductors.

A Hybrid Acceptor‐Modulation Strategy: Fluorinated Triple‐Acceptor Architecture for Significant Enhancement of Electron Transport in High‐Performance Unipolar n‐Type Organic Transistors (Adv. Mater. 8/2023)

Organic Transistors In article number 2210093, Yan Zhao, Yang Wang, Yunqi Liu, and co-workers demonstrate a hybrid acceptor-modulation strategy to synthesize an acceptor unit with a fluorinated triple-acceptor architecture (DPP–difluorobenzothiadiazole–DPP (DFB)). The DFB-based semiconducting polymers feature low-lying frontier molecular orbital levels, shape-persistent backbones, and high crystallinity, leading to an electron mobility of up to 5.04 cm2 V−1 s−1 in unipolar n-type transistors, which is the highest electron mobility among DPP-based unipolar n-type polymers.

N-Type Polymer Semiconductors Based on Dithienylpyrazinediimide.

The development of n-type organic semiconductors critically relies on the design and synthesis of highly electron-deficient building blocks with good solubility and small steric hindrance. We report here a strongly electron-deficient dithienylpyrazinediimide (TPDI) and its n-type semiconducting polymers. The pyrazine substitution leads to the resulting polymers with much lower-lying lowest unoccupied molecular orbital (LUMO) levels and improved backbone planarity compared to the reported dithienylbenzodiimide (TBDI)- and fluorinated dithienylbenzodiimide (TFBDI)-based polymer analogues, thus yielding n-type transport character with an electron mobility up to 0.44 cm2 V-1 s-1 in organic thin-film transistors. These results demonstrate that dithienylpyrazinediimide is a highly promising electron-deficient building block for constructing high-performance n-type polymers and the incorporation of pyrazine into imide-functionalized (hetero)arenes is an effective strategy to develop n-type polymers with deep-lying frontier molecular orbital (FMO) levels for organic optoelectronic devices.

A Hybrid Acceptor-Modulation Strategy: Fluorinated Triple-Acceptor Architecture for Significant Enhancement of Electron Transport in High-Performance Unipolar n-Type Organic Transistors.

The development of unipolar n-type semiconducting polymers with electron mobility (µe ) over 5cm2 V-1 s-1 remains a massive challenge in organic semiconductors. Diketopyrrolopyrrole (DPP) has proven to be a successful unit for high-performance p-type and ambipolar polymers. However, DPP's moderate electron-accepting capability leads to the shallow frontier molecular orbital (FMO) levels of the resultant polymers and hence limit the µe in unipolar n-type organic transistors. Herein, this issue has been addressed by using a hybrid acceptor-modulation strategy based on DPP-containing "fluorinated triple-acceptor architecture", namely DPP-difluorobenzothiadiazole-DPP (DFB). Compared with DFB's non-fluorinated counterpart, DFB features deeper FMO levels and a shape-persistent framework. Therefore, a series of DFB-based polymers demonstrate planar backbones and lowered FMO levels by ≈0.10 to 0.25eV versus that of the control polymer. Intriguingly, all DFB-polymers exhibit excellent unipolar n-type transistor performances. Notably, a full-locked backbone conformation and high crystallinity with crystalline coherence length of 524Å are observed for pDFB-TF, accounting for its high µe of 5.04cm2 V-1 s-1 , which is the highest µe value for DPP-based unipolar n-type polymers reported to date. This work demonstrates that the strategy of "fluorinated triple-acceptor architecture" opens a new path towards high-performance unipolar n-type semiconducting polymers.

Evaluation of darrow red-organosilane composite as a photosensitizer for application in dye-sensitized zinc oxide photocatalysts: DFT and TD-DFT studies.

Density functional theory (DFT) and time-dependent DFT (TD-DFT) studies of darrow red covalently attached to 3-glycidyloxypropyltrimethoxysilane (DR-GPTMS) were conducted, and it was shown that DR-GPTMS can be applied as a photosensitizer in dye-sensitized zinc oxide (ZnO) photocatalysts. The frontier molecular orbital (FMO) levels of DR-GPTMS simulated using a conductor-like polarizable continuum model in water were suitable for electron injection from photoexcited DR-GPTMS to ZnO. Additionally, the oxidized DR-GPTMS produced by electron injection can be regenerated using triethanolamine. UV-visible absorption spectra, FMOs, and density of states spectra of DR-GPTMS adsorbed on the Zn2O3 cluster were also investigated to understand the mechanism of electron injection. The results suggest that DR-GPTMS induces good visible-light absorption and efficient electron injection to ZnO. DFT and TD-DFT calculations were performed using the Gaussian 09W package (Gaussian, Inc., Wallingford, CT, USA). The density of states spectra was obtained using GaussSum (3.0.2). The B3LYP/6-31G** level of theory was employed for all calculations except for the UV-visible absorption spectra simulation. In calculations involving ZnO, the LanL2DZ or SDD basis set was assigned to the zinc atoms. TD-DFT calculations were performed at the eight different functionals (B3LYP, PBE0, M06-L, M06, M06-2X, M06-HF, CAM-B3LYP, and ωB97XD) with the 6-31+G** basis set. A conductor-like polarizable continuum model (CPCM) using water was employed determining the solvent effect.

Counterion Tuning of Near-Infrared Organic Salts Dictates Phototoxicity to Inhibit Tumor Growth.

Photodynamic therapy (PDT) has the potential to improve cancer treatment by providing dual selectivity through the use of both photoactive agent and light, with the goal of minimal harmful effects from either the agent or light alone. However, current PDT is limited by insufficient photosensitizers (PSs) that can suffer from low tissue penetration, insufficient phototoxicity (toxicity with light irradiation), or undesirable cytotoxicity (toxicity without light irradiation). Recently, we reported a platform for decoupling optical and electronic properties with counterions that modulate frontier molecular orbital levels of a photoactive ion. Here, we demonstrate the utility of this platform in vivo by pairing near-infrared (NIR) photoactive heptamethine cyanine cation (Cy+), which has enhanced optical properties for deep tissue penetration, with counterions that make it cytotoxic, phototoxic, or nontoxic in a mouse model of breast cancer. We find that pairing Cy+ with weakly coordinating anion FPhB- results in a selectively phototoxic PS (CyFPhB) that stops tumor growth in vivo with minimal side effects. This work provides proof of concept that our counterion pairing platform can be used to generate improved cancer PSs that are selectively phototoxic to tumors and nontoxic to normal healthy tissues.

CO and NO selective adsorption by a C16Mg8O8 nanocage: A DFT Study

Density functional theory (DFT) calculations were performed to stabilize a representative C16Mg8O8 nanocage derived from C32 and Mg16O16 counterparts for selective adsorption of carbon monoxide (CO) and nitrogen monoxide (NO) gaseous molecules. After obtaining optimized structures, molecular features were evaluated for describing the model systems. Diagrams of density of states (DOS) revealed that the energy differences between frontier molecular orbital levels of the highest occupied and the lowest unoccupied molecular orbitals (HOMO and LUMO) of the stabilized C16Mg8O8 nanocage could provide a more proper semiconductor in comparison with each of the original C32 and Mg16O16 cages. To explore the advantage of such C16Mg8O8 nanocage for CO and NO gases adsorption, molecular descriptors such as energies, geometries, and electronic structures were characterized for all possible adsorption configurations of bimolecular formation of gas . . . nanocage. Significant changes of HOMO and LUMO levels besides the values of corresponding energy gaps of C16Mg8O8 nanocage in singular and bimolecular systems could help to recognize adsorption of each of CO and NO gaseous molecules. Furthermore, more variations of energy gaps in the process of gas . . . nanocage bimolecular formation could lead to more sensitivity of nanocage for detection of adsorbed gases. As a consequence, the investigated C16Mg8O8 nanocage was introduced for differential recognition of CO and NO gases regarding several environmental health issues.

Triphenylamine-Based Conjugated Polyelectrolyte as a Hole Transport Layer for Efficient and Scalable Perovskite Solar Cells.

π-Conjugated polyelectrolytes (CPEs) have been studied as interlayers on top of a separate hole transport layer (HTL) to improve the wetting, interfacial defect passivation, and crystal growth of perovskites. However, very few CPE-based HTLs have been reported without rational molecular design as ideal HTLs for perovskite solar cells (PeSCs). In this study, the authors synthesize a triphenylamine-based anionic CPE (TPAFS-TMA) as an HTL for p-i-n-type PeSCs. TPAFS-TMA has appropriate frontier molecular orbital (FMO) levels similar to those of the commonly used poly(bis(4-phenyl)-2,4,6-trimethylphenylamine) (PTAA) HTL. The ionic and semiconducting TPAFS-TMA shows high compatibility, high transmittance, appropriate FMO energy levels for hole extraction and electron blocking, as well as defect passivating properties, which are confirmed using various optical and electrical analyses. Thus, the PeSC with the TPAFS-TMA HTL exhibits the best power conversion efficiency (PCE) of 20.86%, which is better than that of the PTAA-based device (PCE of 19.97%). In addition, it exhibits negligible device-to-device variations in its photovoltaic performance, contrary to the device with PTAA. Finally, a large-area PeSC (1 cm2 ) and mini-module (3 cm2 ), showing PCEs of 19.46% and 18.41%, respectively, are successfully fabricated. The newly synthesized TPAFS-TMA may suggest its great potential as an HTL for large-area PeSCs.

N-Type Organic and Polymeric Semiconductors Based on Bithiophene Imide Derivatives

ConspectusIn the last three decades, p-type (hole-transporting) organic and polymeric semiconductors have achieved great success in terms of materials diversity and device performance, while the development of n-type (electron-transporting) analogues greatly lags behind, which is limited by the scarcity of highly electron-deficient building blocks with compact geometry and good solubility. However, such n-type semiconductors are essential due to the existence of the p-n junction and a complementary metal oxide semiconductor (CMOS)-like circuit in organic electronic devices. Among various electron-deficient building blocks, imide-functionalized arenes, such as naphthalene diimide (NDI) and perylene diimide (PDI), have been proven to be the most promising ones for developing n-type organic and polymeric semiconductors. Nevertheless, phenyl-based NDI and PDI lead to sizable steric hindrance with neighboring (hetero)arenes and a high degree of backbone distortion in the resultant semiconductors, which greatly limits their microstructural ordering and charge transport. To attenuate the steric hindrance associated with NDI and PDI, a novel imide-functionalized heteroarene, bithiophene imide (BTI), was designed; however, the BTI-based semiconductors suffer from high-lying frontier molecular orbital (FMO) energy levels as a result of their electron-rich thiophene framework and monoimide group, which is detrimental to n-type performance.In this Account, we review a series of BTI derivatives developed via various strategies, including ring fusion, thiazole substitution, fluorination, cyanation, and chalcogen substitution, and elaborate the synthesis routes designed to overcome the synthesis challenges due to their high electron deficiency. After structural optimization, these BTI derivatives can not only retain the advantages of good solubility, a planar backbone, and small steric hindrance inherited from BTI but also have greatly suppressed FMO levels. These novel building blocks enable the construction of a great number of n-type organic and polymeric semiconductors, particularly acceptor-acceptor (or all-acceptor)-type polymers, with remarkable performance in various devices, including electron mobility (μe) of 3.71 cm2 V-1 s-1 in organic thin-film transistors (OTFTs), a power conversion efficiency (PCE) of 15.2% in all-polymer solar cells (all-PSCs), a PCE of 20.8% in inverted perovskite solar cells (PVSCs), electrical conductivity (σ) of 0.34 S cm-1 and a power factor (PF) of 1.52 μW m-1 K-2 in self-doped diradicals, and σ of 23.3 S cm-1 and a PF of ∼10 μW m-1 K-2 in molecularly n-doped polymers, all of which are among the best values in each type of device. The structure-property-device performance correlations of these n-type semiconductors are elucidated. The design strategy and synthesis of these novel BTI derivatives provide important information for developing highly electron-deficient building blocks with optimized physicochemical properties. Finally, we offer our insights into the further development of BTI derivatives and semiconductors built from them.

Easily synthesized pyrene-based nonfullerene acceptors for efficient organic solar cells

Pyrene is a commercial fused-ring unit and has attracted much attention in the field of organic photoelectric functional materials. Herein, two non-fullerene acceptors (NFAs) Py-2H and Py-2F based on pyrene core have been developed. Unlike most others NFAs, Py-2H and Py-2F were synthesized via a simple and easy synthesis method, and this is fundamental for commercialization of organic solar cells (OSCs). Compared with Py-2H, fluorinated Py-2F exhibited narrower optical bandgap of 1.66 eV, better π-π stacking, lower frontier molecular orbital levels, and its PBDB-T:Py-2F blend film exhibited triple electron mobility. As a result, PBDB-T:Py-2F solar cells afforded a decent power conversion efficiency (PCE) of 9.73%, with an open-circuit voltage (VOC) of 0.92 V, a short circuit current (JSC) of 15.44 mA/cm2 and a fill factor (FF) of 68.22%. As comparison, PBDB-T:Py-2H cell just achieved only one-half PCE of 5.13%. These results demonstrated that NFAs based on fused-ring pyrene core are promising for organic photovoltaic applications due to the simple synthesis, low cost, and decent photovoltaic performance.

Regioregular Narrow-Bandgap n-Type Polymers with High Electron Mobility Enabling Highly Efficient All-Polymer Solar Cells.

Narrow-bandgap n-type polymers with high electron mobility are urgently demanded for the development of all-polymer solar cells (all-PSCs). Here, two regioregular narrow-bandgap polymer acceptors, L15 and MBTI, with two electron-deficient segments are synthesized by copolymerizing two dibrominated fused-ring electron acceptors (FREA) with distannylated aromatic imide, respectively. Taking full advantage of the FREA and the imide, both polymer acceptors show narrow bandgap and high electron mobility. Benefiting from the more extended absorption, better backbone ordering, and higher electron mobility than those of its regiorandom analog, the L15-based all-PSC yields a high power conversion efficiency (PCE) of 15.2% when blended with the polymer donor PM6. More importantly, MBTI incorporating a benzothiophene-core FREA segment shows relatively higher frontier molecular orbital levels than L15, forming a cascade-like energy level alignment with L15 and PM6. Based on this, ternary all-PSCs are designed where MBTI is introduced as a guest into the PM6:L15 host system. Thanks to further optimal blend morphology and more balanced charge transport, the PCE is improved up to 16.2%, which is among the highest values for all-PSCs. The results demonstrate that combining an FREA and an aromatic imide to construct regioregular narrow-bandgap polymer acceptors provides an effective approach to fabricate highly efficient all-PSCs.

Developing Halogen‐Free Polymer Donors for Efficient Nonfullerene Organic Solar Cells by Addition of Highly Electron‐Deficient Diketopyrrolopyrrole Unit

High‐performance polymer donors when paired with nonfullerene acceptors are mainly limited to flanking halogenated benzodithiophene (BDT)‐based π‐conjugated copolymers, which however involve complex synthetic procedures. Herein, a series of halogen‐free polymer donors that link BDT moiety with two highly electron‐deficient benzodithiophene‐dione (BDD) and diketopyrrolopyrrole (DPP) units with various molar ratios is developed. Compared with the benchmark PBDB‐T donor containing BDD unit, additional incorporation of a stronger electron‐negative DPP unit markedly lowers frontier molecular orbital levels and extends optical absorption, potentially leading to simultaneously enhanced VOC and JSC in organic solar cells. A remarkable power conversion efficiency (PCE) of 10.28% is thus obtained in the optimal P75 (BDD : DPP = 3:1 mol%) and Y6 blend cells in comparison with the reference PBDB‐T:Y6 (9.20%). A slight addition of PC71BM into the blend is found to further generate finer phase‐separated domains and thus increase the best efficiency up to 12.20%. The subtly critical roles of PC71BM are determined by transient absorption measurements on both thin‐film and in situ devices to be the prolonged free charge carrier lifetime and the shallow charge transfer states, which enhance JSC and fill factor in the device, respectively.