Frequency Tuning Characteristics Research Articles

Self‐isolated quadruplexing SIW antenna with extremely low frequency ratio for C‐band applications

AbstractIn this letter, an substrate integrated waveguide ‐based self‐quadplexing antenna based on a modified Jerusalem cross‐shaped slot is presented. By introducing different lengths of the slots of Jerusalem cross, the antenna operates at four different closely spaced resonant frequencies 4.08, 4.37, 4.61, and 4.97 GHz. The proposed quadplexer antenna achieved a minimum port isolation of 20 dB between any two ports with an extremely low frequency ratio of 1.2. The quadplexer antenna has unidirectional radiation pattern and independent frequency tunability characteristics with a gain of 6.88, 6.51, 7.03, and 7.12 dBi, at corresponding resonant frequencies and a compact size of 0.142, where 0 is the free space wavelength at the lowest resonant frequency. The proposed antenna is suitable for C‐band multiplexing applications.

Masseter vestibular-evoked myogenic potentials at different tone burst frequencies in healthy individuals

BackgroundMasseter vestibular-evoked myogenic potentials (mVEMP) are vestibular-dependent inhibitory reflex recorded using acoustic stimulus. mVEMP can assess important brainstem regions. mVEMP abnormalities have been reported in patients with multiple sclerosis, Parkinson’s disease, and idiopathic random eye movement disorder. The objective of the study was to record mVEMP using tone-burst stimulus at different frequencies in young healthy individuals.MethodThe study used normative study design. Thirty-two participants, aged 18–28 years with normal hearing and balance function, were recruited for the study. Simple random sampling was used for selection of participants.Data collection and analysismVEMP was recorded for all the individuals at 500 Hz,750 Hz,1000 Hz, 2000 Hz, and 4000 Hz tone burst stimuli. The p11 and n21 peaks were identified. The latency of the p11 and n21 peaks and the rectified amplitude of the p11-n21 peak complex were measured for all the participants. Wilcoxson signed-rank test was used for statistical anlysis.ResultsThe study found a 100% response rate and higher amplitude for 500 Hz and 750 Hz tone burst stimuli. However, Wilcoxson signed-rank test with Bonferroni correction showed no significant difference in amplitude (p = 0.92) between 500 and 750 Hz.ConclusionThe study recommends 500 Hz/750 Hz tone burst stimuli as an optimal frequency for recording mVEMP in young, healthy individuals. However, seeing the frequency-tuning characteristics of mVEMP in other peripheral vestibular pathologies would be interesting.

A Low-Cost Microfluidic and Optically Transparent Water Antenna with Frequency-Tuning Characteristics.

In this study, a novel microfluidic frequency reconfigurable and optically transparent water antenna is designed using three-dimensional (3D) printing technology. The proposed antenna consists of three distinct parts, including a circularly shaped distilled water ground, a sea water-based circular segmented radiator, and a circularly shaped distilled water-based load, all ingeniously constructed from transparent resin material. The presented antenna is excited by a disk-loaded probe. The frequency of the antenna can be easily tuned by filling and emptying/evacuating sea water from the multisegmented radiator. The radiator consists of three segments with different radii, and each segment has a different resonant frequency. When the radiator is filled, the antenna resonates at the frequency of the segment that is filled. When all the radiator segments are filled, the antenna operates at the resonant frequency of 2.4 GHz and possesses an impedance bandwidth of 1.05 GHz (40%) in the range of 2.10-3.15 GHz. By filling different radiator segments, the frequency could be tuned from 2.4 to 2.6 GHz. In addition to the frequency-switching characteristics, the proposed antenna exhibits high simulated radiation efficiency (with a peak performance reaching 95%) and attains a maximum realized gain of 3.8 dBi at 2.9 GHz. The proposed antenna integrates water as its predominant constituent, which is easily available, thereby achieving cost-effectiveness, compactness, and transparency characteristics; it also has the potential to be utilized in future applications, involving transparent and flexible electronics.

Tunable ultra-wideband graphene metasurface absorber: A mode merger design approach for terahertz applications

This paper presents a systematic approach for designing an ultra-wideband (UWB) absorber for terahertz (THz) applications. The metasurface consists of top patterned graphene (Gpat) and bottom continuous graphene (Gcont), each having a thickness of 0.335 nm and separated by a 3 μm thick silicon dioxide (SiO2) dielectric. Multiple absorbing modes have been generated by engraving rectangular, star-shaped, and circular ring slots on the top Gpat resonating at 3.22, 4.52, and 0.32 THz, respectively. A circular ring slot works as a coupling controller and helps to combine different slot resonances. The mode merger technique, along with the high plasmonic coupling between Gpat and Gcont controlled by Gcont help to attain an absorption bandwidth (BW) of 5.9 THz (193.44%) with absorptivity ≥ 90% ranging from 0.1 to 6 THz. The periodicity and thickness of the proposed polarization-insensitive metasurface are found to be λ0/300 and λ0/996.68, respectively, where λ0 is free space wavelength computed at 0.1 THz. Absorptivity ≥ 80% for incidence angle up to 60∘ under both transverse electric (TE) and transverse magnetic (TM) polarization has also been achieved. The absorber provides excellent frequency tunable characteristics over a UWB band and shows blue-shift with increased chemical potential (μc).

A 1.2GHz Frequency Range, 153.4 dBc/Hz FoM, low Phase Noise, Current Starved Multi-Path Ring VCO

This article describes the design of a low power, low phase noise, multi-Path ring VCO (MPRVCO) in 90nm CMOS process. The proposed oscillator achieves a tuning range of 1.2GHz operating at 1.65 GHz center frequency, with reduced phase noise of -87.3dBc/Hz at 1MHz offset. The proposed MPRVCO achieves a FoM of 153.4dBc/Hz, consuming 0.657mW power at 1.65GHz frequency. The proposed VCO utilizes Current starving technique for frequency variation. Sub-threshold transistor is used to obtain monotonic and linear frequency tuning characteristics. The proposed VCO is one of the very few Current Starved ring VCOs capable of producing such low phase noise in 90nm CMOS process while operating in GHz frequency range

A Tunable and Wearable Dual-Band Metamaterial Absorber Based on Polyethylene Terephthalate (PET) Substrate for Sensing Applications.

Advanced wireless communication technology claims miniaturized, reconfigurable, highly efficient, and flexible meta-devices for various applications, including conformal implementation, flexible antennas, wearable sensors, etc. Therefore, bearing these challenges in mind, a dual-band flexible metamaterial absorber (MMA) with frequency-reconfigurable characteristics is developed in this research. The geometry of the proposed MMA comprises a square patch surrounded by a square ring, which is mounted over a copper-backed flexible dielectric substrate. The top surface of the MMA is made of silver nanoparticle ink and a middle polyethylene terephthalate (PET) substrate backed by a copper groundsheet. The proposed MMA shows an absorption rate of above 99% at 24 and 35 GHz. In addition, the absorption features are also studied for different oblique incident angles, and it is found that the proposed MMA remains stable for θ = 10-50°. The frequency tunability characteristics are achieved by stimulating the capacitance of the varactor diode, which connects the inner patch with the outer ring. To justify the robustness and conformability of the presented MMA, the absorption features are also studied by bending the MMA over different radii of an arbitrary cylinder. Moreover, a multiple-reflection interference model is developed to justify the simulated and calculated absorption of the proposed MMA. It is found that the simulated and calculated results are in close agreement with each other. This kind of MMA could be useful for dual-band sensing and filtering operations.

Nonlinear optical frequency conversion by cascaded difference frequency generation

We propose a nonlinear optical frequency conversion method based on cascaded difference frequency generation. Feasible designs are presented that enable the cascaded optical waves. They are initially generated by cascaded difference frequency generation with two pump waves, then transferred to high-order Stokes waves by optimized cascaded difference frequency generation, and finally congregated at a few spectral lines. We demonstrate wide frequency tuning characteristics and high conversion efficiency characteristics of the nonlinear frequency convertor by providing a theoretical framework. The frequency tuning from 291 THz to 175 THz and energy conversion efficiency exceeding 30% are achieved by numerical calculations. The nonlinear frequency convertor exhibits physics distinctly different from conventional three-wave mixing parametric amplification or difference frequency generation. We argue that the nonlinear frequency convertor based on cascaded difference frequency generation is promising for achieving efficient and robust frequency conversion.

Research on coupled cavity mechanical tuning extended interaction oscillator with broad tuning range.

This paper proposes a new way to improve the tuning range of the extended interaction oscillator (EIO). Compared with the conventional EIO structure, the fundamental wave changes from the forward wave to the backward wave when the circuit structure changes from the strong-coupling characteristic of the grating to the weak-coupling characteristic. Simultaneously, the tuning range of the EIO can be greatly enhanced by mechanically tuning the coupling cavity. The results show that, compared with the strong-coupling structure of the grating, the extended interaction oscillation circuit has stronger dispersion sensitivity and greater frequency tuning characteristics under the weak-coupling characteristics of the grating. By mechanically tuning the width of the coupling cavity by 0.8mm, its center frequency can be varied by 9.5GHz. This paper also studies and compares the electronic displacement jump phenomenon that occurs in the mechanical tuning process. Similar to the electronic voltage tuning, the output dips suddenly at the operating point of the coupling mismatch. The effective output can be obtained by changing the operating mode in conjunction with electronic tuning. This article provides a new reference method for expanding the tuning range of the extended interaction oscillator.

C, X, and Ku three‐band tunable metamaterial absorber based on varactor diodes

AbstractA three‐band tunable polarization‐insensitive metamaterial absorber is proposed in this paper. The unit cell of the absorber is composed of a dielectric substrate, a metal patch, and four varactor diodes welded on the top layer. A simple metal via bias network is designed to facilitate the absorption frequency tuning of the absorber. The simulation results show that when there is no bias voltage (0 V), the proposed absorber has three absorption peaks of 88%, 99.5%, and 99.8% under normal incidence at 7.27, 10.93, and 15.84 GHz, respectively. Furthermore, by adjusting the reverse bias voltage (0–19 V) of the varactor, the first absorption peak of the absorber can be tuned from 7.27 to 8.2 GHz and the second absorption peak tuned from 10.93 to 11.4 GHz. Meanwhile, the tuning range for the third absorption peak is 15.84–16.1 GHz. Furthermore, the three‐band absorption and frequency tunable characteristics of the absorber are confirmed by experimental tests.

Effects of background noise on auditory response characteristics of primary auditory cortex neurons in awake mice

To study the effects of different continuous background noises on auditory response characteristics of primary auditory cortex (A1) neurons in awake mice. We performed in vivo cell-attached recordings in layer 4 neurons of the A1 of awake mice to investigate how continuous background noises of different levels affected the intensity tuning, frequency tuning and time characteristics of individual A1 neurons. According to the intensity tuning characteristics and types of stimulation, 44 neurons were devided into 4 groups: monotonic-intensity group (20 monotonic neurons), nonmonotonic-intensity group (6 nonmonotonic neurons), monotonic-frequency group (25 monotonic neurons) and monotonic-latency group (15 monotonic neurons). The A1 neurons only had transient spike response within 10 to 40 ms after the onset of continuous wild-band noise stimulation. The noise intensity had no significant effects on the background firing rates of the A1 neurons (P>0.05). The increase of background noise resulted in a significant linear elevation of the intensity threshold of monotonic and nonmonotonic neurons for tone-evoked response (R2>0.90, P < 0.05). No significant difference was observed in the slopes of threshold changes between monotonic and nonmonotonic neurons (P>0.05). The best intensity of nonmonotonic neurons increased along with the intensity of the background noise, and the variation of the best intensity was positively correlated with the change of the threshold of the same neuron (r=0.944, P < 0.001). The frequency response bandwidth and the firing rate of the A1 neurons decreased as the noise intensity increased (P < 0.001), but the best frequency almost remained unchanged (P < 0.001). The increase of background noise intensity resulted in an increased first spike latency of the neurons to the same tone stimulus (P < 0.05) without affecting the time accuracy of the first action potential (P>0.05). The acoustic response threshold of the A1 neurons increases linearly with the increase of background noise intensity. An increased background noise leads to compressed frequency band-width, a decreased firing rate and a prolonged spike latency, but the frequency selectivity and the time accuracy of auditory response to the same noise remain stable.

A wideband multilayer tunable filter using active frequency selective surface

AbstractA wideband multilayer filter with frequency tunable characteristics is proposed using active frequency selective surface (AFSS). The proposed AFSS includes three metal layers, while the top and bottom metal layers are embedded with varactors. The metal layers are separated by dielectric layers. By simultaneously adjusting the bias voltage loaded on both ends of the varactor diode, the working bandwidth of the AFSS can be continuously tuned. The operating mechanism is studied using an equivalent circuit, which is composed of an LC series resonance circuit and a parallel resonance circuit. The simulation results prove that the proposed AFSS performs wideband filtering in the frequency range of 3.55 to 4.43 GHz without a bias voltage. With a bias voltage of −19 V, the AFSS working passband is tuned to 4.43 to 5.53 GHz. Simulation and experimental results show that the AFSS has wideband filtering characteristics and good tunable performance.

Frequency tuning behaviour of terahertz quantum cascade lasers revealed by a laser beating scheme.

In the terahertz frequency range, the commercialized spectrometers, such as the Fourier transform infrared and time domain spectroscopies, show spectral resolutions between a hundred megahertz and a few gigahertz. Therefore, the high precision frequency tuning ability of terahertz lasers cannot be revealed by these traditional spectroscopic techniques. In this work, we demonstrate a laser beating experiment to investigate the frequency tuning characteristics of terahertz quantum cascade lasers (QCLs) induced by temperature or drive current. Two terahertz QCLs emitting around 4.2 THz with identical active regions and laser dimensions (150 µm wide and 6 mm long) are employed in the beating experiment. One laser is operated as a frequency comb and the other one is driven at a lower current to emit a single frequency. To measure the beating signal, the single mode laser is used as a fast detector (laser self-detection). The laser beating scheme allows the high precision measurement of the frequency tuning of the single mode terahertz QCL. The experimental results show that in the investigated temperature and current ranges, the frequency tuning coefficients of the terahertz QCL are 6.1 MHz/0.1 K (temperature tuning) and 2.7 MHz/mA (current tuning) that cannot be revealed by a traditional terahertz spectrometer. The laser beating technique shows potential abilities in high precision linewidth measurements of narrow absorption lines and multi-channel terahertz communications.

Broadband linearity enhancement method for a 1.3 GHz–2.5 GHz digitally-assisted oscillator in a 55-nm CMOS technology

At the L/S band, the digital array radars with digital beam-forming characteristics require a compact RF module for a plane array. Such an RF module would require a small-sized local clock generation to synchronize with the central distributed clock signal. This paper proposes a 0.04 mm2, broadband local clock generation for the RF module in digital array radar. In such a multi-band digital array radar, the linearity of the clock generator is a bottleneck. A linearity enhanced algorithm for switched-capacitor digitally-assisted oscillators is proposed in this paper. In this linearity enhancement technique, a calibration resistor array is used to improve frequency-tuning characteristics. The digitally-assisted oscillator has a highly linearized frequency tuning curve without demanding much more power and silicon area. A prototype is fabricated using a 55-nm CMOS process. From measurement, it has a frequency tuning range from 1.3 GHz to 2.5 GHz while occupying 225 × 180 μm2. The measured coarse bank tuning maximum DNL is 0.39 LSB, and the maximum INL is 4.64 LSB, which has been reduced to 43% of the other state-of-art work. The maximum power consumption is 15.8 mW from a 1.2 V supply voltage.

Global and Parallel Cortical Processing Based on Auditory Gamma Oscillatory Responses in Humans.

Gamma oscillations are physiological phenomena that reflect perception and cognition, and involve parvalbumin-positive γ-aminobutyric acid-ergic interneuron function. The auditory steady-state response (ASSR) is the most robust index for gamma oscillations, and it is impaired in patients with neuropsychiatric disorders such as schizophrenia and autism. Although ASSR reduction is known to vary in terms of frequency and time, the neural mechanisms are poorly understood. We obtained high-density electrocorticography recordings from a wide area of the cortex in 8 patients with refractory epilepsy. In an ASSR paradigm, click sounds were presented at frequencies of 20, 30, 40, 60, 80, 120, and 160 Hz. We performed time-frequency analyses and analyzed intertrial coherence, event-related spectral perturbation, and high-gamma oscillations. We demonstrate that the ASSR is globally distributed among the temporal, parietal, and frontal cortices. The ASSR was composed of time-dependent neural subcircuits differing in frequency tuning. Importantly, the frequency tuning characteristics of the late-latency ASSR varied between the temporal/frontal and parietal cortex, suggestive of differentiation along parallel auditory pathways. This large-scale survey of the cortical ASSR could serve as a foundation for future studies of the ASSR in patients with neuropsychiatric disorders.

Multifunctional Frequency Selective Rasorber With Dual Mode and Continuous Tunability

This article introduces a multifunctional polarization insensitive frequency selective rasorber (MF-FSR) comprised of periodic metallic patterns printed on two dielectric substrates and separated by an air-spacer. The novelty of the proposed MF-FSR lies in its combined feature of mode switching and frequency tuning characteristics. This uniquely offers a real-time and multifunctional capability to switch from “rasorber mode (FSA-T)” into an “absorber with notch band (FSA-N)” mode where both modes support continuous tunability of their “transmission” or “notch” band. By controlling the reverse bias voltage of the embedded varactor, the transmission band in FSA-T mode can be tuned from 3.76 to 4.26 GHz with a very low insertion loss in the range of 0.62-0.95 dB. In complementary FSA-N mode, the notch band is also tunable from 4.17 to 4.71 GHz. Moreover, the same varactor set can control the tuning of transmission or the notch band depending upon MF-FSR's basic state of operation which is further independently controllable by the p-i-n diode. Equivalent circuit models are also thoroughly examined. Finally, a prototype is fabricated and experimentally tested, showing a good agreement with the predicted results.

Frequency Tuning Characteristics of a High-Power Sub-THz Gyrotron with Quasi-Optical Cavity

Motivated by some emerging high-frequency applications, a high-power frequency-tunable sub-THz quasi-optical gyrotron cavity based on a confocal waveguide is designed in this paper. The frequency tuning characteristics of different approaches, including magnetic field tuning, mirror separation adjustment, and hybrid tuning, have been investigated by particle-in-cell (PIC) simulation. Results predict that it is possible to realize a smooth continuous frequency tuning band with an extraordinarily broad bandwidth of 41.55 GHz, corresponding to a relative bandwidth of 18.7% to the center frequency of 0.22 THz. The frequency tunability is provided by varying the separation distance between two mirrors and correspondingly adjusting the external magnetic field. During the frequency tuning, the output power remains higher than 20 kW, which corresponds to an interaction efficiency of 10%. Providing great advantages in terms of broad bandwidth, smooth tuning, and high power, this research may be conducive to the development of high-power frequency-tunable THz gyrotron oscillators.

Particle-in-Cell Simulation and Analysis of 28-Vane Megawatt-Class Pulsed Power Coaxial Magnetron in X-Band

This article presents the design and analysis of a 28-vane megawatt-class pulsed power coaxial magnetron operating in $X$ -band for medical linear accelerator (LINAC) applications. The systematic design procedure of the coaxial magnetron is presented. The proposed coaxial magnetron is analyzed using particle-in-cell (PIC) simulations. The output is taken from the standard WR112 waveguide through a rectangular slot in the outer wall of the coaxial cavity. The maximum total efficiency of 62.04% is obtained at 9.2987 GHz, having a 2.12-MW peak output power for stable $\pi $ -mode operation. The $\pi $ -mode operation is determined by 14 spokes of electrons in the PIC simulation. Electronic efficiency and circuit efficiency of the designed coaxial magnetron are obtained as 73.86% and 84%, respectively. The output peak power can be enhanced by optimizing the applied magnetic field in the operating region of $\pi $ -mode. Total efficiency is improved by 2.74% by changing the shape of the cathode end hats from conventional to conical. The dielectric properties of the slot-mode suppressor are optimized based on the output performance of coaxial magnetron. The optimal values of dielectric constant and loss tangents are obtained as 21 and 0.08, respectively. The frequency-tuning characteristics of the magnetron are also analyzed, and the tuning range is obtained as 9.2987 GHz ± 20 MHz.

Active Terahertz Anisotropy and Dispersion Engineering Based on Dual-frequency Liquid Crystal and Dielectric Metasurface

Active broadband terahertz (THz) phase difference and its dispersion engineering based on the combination of dielectric metasurface and dual-frequency liquid crystal (DFLC) has been demonstrated, which can realize broadband achromatic wave plates and active manipulation by tuning the alternating ( AC ) frequency of electric field from 1 to 90 kHz. The artificial anisotropy of the dielectric metasurface is introduced to offset the tunable natural birefringence of the DFLC, so that the effective tuning range of the composite metadevice has been significantly improved, across from 0 to 1.0π, thus realizing the conversion from linear polarization (LP) light to arbitrarily polarized light. Moreover, a negative-dispersion phase difference of the dielectric metasurface can be achieved in the range of 0.69–1.4 THz by designing proper geometric parameters, which can be compensated with the positive-dispersion phase difference of DFLC to realize an achromatic device with broadband zero dispersion. The results show that the device can be tuned from OFF state without polarization conversion to a half-wave plate in 0.97–1.3 THz with the polarization conversion ratio (PCR) of over 97%, or to a quarter-wave plate in 0.67–1.3 THz with the PCR of over 96% by changing the AC frequency of the electric field. The active AC frequency tuning characteristics, anisotropic enhancement and broadband dispersion compensation show its great potential in THz application systems.

Global and Parallel Cortical Processing of Auditory Gamma Oscillatory Responses in Humans

Gamma oscillation is a physiological phenomenon that reflects higher cognitive function and parvalbumin-positive GABAergic interneuron function in animals. Gamma-band auditory steady-state response (ASSR) is the most robust index for gamma oscillation, which is impaired in patients with neuropsychiatric disorders. Although ASSR reduction is known to be selective for frequency and time, the neural basis of this phenomenon is poorly understood. We directly showed in the current study that ASSR is globally distributed among the temporal, parietal, and frontal cortices using electrocorticography (ECoG) recording from a wide range of the cortex in patients with refractory epilepsy. ASSR was composed of multiple neural circuits depending on frequency and latency. Importantly, late-latency ASSR was topographically organized along the dorsal and ventral auditory pathways according to frequency tuning characteristics. These results provide a neural basis of the frequency-time dependence of ASSR reduction in patients with neuropsychiatric disorders.

Wideband, high-resolution terahertz spectroscopy by light-induced frequency tuning of quantum-cascade lasers.

Near-infrared optical excitation enables wideband frequency tuning of terahertz quantum-cascade lasers. In this work, we demonstrate the feasibility of the approach for molecular laser absorption spectroscopy. We present a physical model which explains the observed frequency tuning characteristics by the optical excitation of an electron-hole plasma. Due to an improved excitation configuration as compared to previous work, we observe a single-mode continuous-wave frequency coverage of as much as 40 GHz for a laser at 3.1 THz. This represents, for the same device, a ten-fold improvement over the usually employed tuning by current. The method can be readily applied to a large class of devices.