Light Source Free Electron Laser Research Articles

A thermal deformation optimization method forcryogenically cooled silicon crystal monochromators under high heat load.

A method to optimize the thermal deformation of an indirectly cryo-cooled silicon crystal monochromator exposed to intense X-rays at a low-emittance diffraction-limited synchrotron radiation source is presented. The thermal-induced slope error of the monochromator crystal has been studied as a function of heat transfer efficiency, crystal temperature distribution and beam footprint size. A partial cooling method is proposed, which flattens the crystal surface profile within the beam footprint by modifying the cooling contact area to optimize the crystal peak temperature. The optimal temperature varies with different photon energies, which is investigated, and a proper cooling strategy is obtained to fulfil the thermal distortion requirements over the entire photon energy range. At an absorbed power up to 300 W with a maximum power density of 44.8 W mm-2 normal incidence beam from an in-vacuum undulator, the crystal thermal distortion does not exceed 0.3 µrad at 8.33 keV. This method will provide references for the monochromator design on diffraction-limited synchrotron radiation or free-electron laser light sources.

Compact single-shot soft X-ray photon spectrometer for free-electron laser diagnostics.

The photon spectrum from free-electron laser (FEL) light sources offers valuable information in time-resolved experiments and machine optimization in the spectral and temporal domains. We have developed a compact single-shot photon spectrometer to diagnose soft X-ray spectra. The spectrometer consists of an array of off-axis Fresnel zone plates (FZP) that act as transmission-imaging gratings, a Ce:YAG scintillator, and a microscope objective to image the scintillation target onto a two-dimensional imaging detector. This spectrometer operates in segmented energy ranges which covers tens of electronvolts for each absorption edge associated with several atomic constituents: carbon, nitrogen, oxygen, and neon. The spectrometer's performance is demonstrated at a repetition rate of 120 Hz, but our detection scheme can be easily extended to 200 kHz spectral collection by employing a fast complementary metal oxide semiconductor (CMOS) line-scan camera to detect the light from the scintillator. This compact photon spectrometer provides an opportunity for monitoring the spectrum downstream of an endstation in a limited space environment with sub-electronvolt energy resolution.

All polymer microfluidic chips-A fixed target sample delivery workhorse for serial crystallography.

The development of x-ray free electron laser (XFEL) light sources and serial crystallography methodologies has led to a revolution in protein crystallography, enabling the determination of previously unobtainable protein structures and near-atomic resolution of otherwise poorly diffracting protein crystals. However, to utilize XFEL sources efficiently demands the continuous, rapid delivery of a large number of difficult-to-handle microcrystals to the x-ray beam. A recently developed fixed-target system, in which crystals of interest are enclosed within a sample holder, which is rastered through the x-ray beam, is discussed in detail in this Perspective. The fixed target is easy to use, maintains sample hydration, and can be readily modified to allow a broad range of sample types and different beamline requirements. Recent innovations demonstrate the potential of such microfluidic-based fixed targets to be an all-around "workhorse" for serial crystallography measurements. This Perspective will summarize recent advancements in microfluidic fixed targets for serial crystallography, examine needs for future development, and guide users in designing, choosing, and utilizing a fixed-target sample delivery device for their system.

Elettra-Sincrotrone Trieste: present and future

We present an overview of the Elettra-Sincrotrone Trieste research center, which hosts synchrotron and free-electron laser light sources. We review the current status, provide examples of recent achievements in basic and applied research and discuss the upgrade programs of the facility.

Infrared photodesorption of CO from astrophysically relevant ices studied with a free-electron laser.

The infrared excitation and photodesorption of carbon monoxide (CO) and water-containing ices have been investigated using the FEL-2 free-electron laser light source at the FELIX laboratory, Radboud University, The Netherlands. CO-water mixed ices grown on a gold-coated copper substrate at 18 K were investigated. No CO photodesorption was observed, within our detection limits, following irradiation with light resonant with the C-O vibration (4.67 μm). CO photodesorption was seen as a result of irradiation with infrared light resonant with water vibrational modes at 2.9 μm and 12 μm. Changes to the structure of the water ice, which modifies the environment of the CO in the mixed ice, were also seen subsequent to irradiation at these wavelengths. No water desorption was observed at any wavelength of irradiation. Photodesorption at both wavelengths is due to a single-photon process. Photodesorption arises due to a combination of fast and slow processes of indirect resonant photodesorption (fast), and photon-induced desorption resulting from energy accumulation in the librational heat bath of the solid water (slow) and metal-substrate-mediated laser-induced thermal desorption (slow). Estimated cross-sections for the slow processes at 2.9 μm and 12 μm were found to be ∼7.5 × 10-18 cm2 and ∼4.5 × 10-19 cm2, respectively.

X-ray free electron laser linear accelerator without a laser heater

Linear accelerator based X-ray free electron laser (FEL) light sources provide an important tool for scientific discoveries. Most of these light source facilities employ a laser heater to increase the electron beam’s uncorrelated energy spread to suppress microbunching instability through the linear accelerators. In this paper, we first studied the microbunching instability in an X-ray FEL linear accelerator with lower initial peak current (∼10 A) and moderate final peak currents (1−2 kA). In this regime, the microbunching instability can be substantially mitigated with modest initial uncorrelated energy spread. We then suggested a less expensive method to mitigate the microbunching instability using a section of low beta FODO lattice instead of the laser heater. With the use of the high brightness electron beam from a photoinjector, the intrabeam scattering effect inside the beam through the FODO lattice can generate sufficient uncorrelated energy spread to mitigate the microbunching instability. At last, we demonstrated the feasibility of this method with self-consistent solution of the Fokker–Planck equation through the X-ray FEL linear accelerator.

Megahertz pulse trains enable multi-hit serial femtosecond crystallography experiments at X-ray free electron lasers

The European X-ray Free Electron Laser (XFEL) and Linac Coherent Light Source (LCLS) II are extremely intense sources of X-rays capable of generating Serial Femtosecond Crystallography (SFX) data at megahertz (MHz) repetition rates. Previous work has shown that it is possible to use consecutive X-ray pulses to collect diffraction patterns from individual crystals. Here, we exploit the MHz pulse structure of the European XFEL to obtain two complete datasets from the same lysozyme crystal, first hit and the second hit, before it exits the beam. The two datasets, separated by <1 µs, yield up to 2.1 Å resolution structures. Comparisons between the two structures reveal no indications of radiation damage or significant changes within the active site, consistent with the calculated dose estimates. This demonstrates MHz SFX can be used as a tool for tracking sub-microsecond structural changes in individual single crystals, a technique we refer to as multi-hit SFX.

High precision real-time insertion device and monochromator synchronization at NSLS-II

Insertion devices have become the dominant photon source at synchrotron and free electron laser light source facilities the world over. Undulators, characterized by their small deflection parameter, exhibit a high degree of constructive interference in photon production from high energy charged particle beams leading to very high photon rates at specific harmonics of the fundamental frequency with relatively narrow spectral widths. Spectroscopic measurements of interest typically span several of these harmonic widths, which requires precision adjustment of an undulator’s magnetic gap to maintain peak flux within the much narrower bandwidth of a beamline monochromator at the desired energy. High precision insertion device controls are developed at NSLS-II including real-time linked control of monochromator hardware allowing for fast, high precision, hardware triggered, spectroscopic measurements. This fast fly scan method is described, compared statistically for self consistency, and shown to be far superior in both efficiency and accuracy as compared to standard step scan measurements.

Zhentang Zhao: past and future of the Shanghai Synchrotron Radiation Facility.

A synchrotron light source is familiar to many researchers. Biologists use it to determine structures of proteins and other biomacromolecules; material scientists use it to analyze internal structures of different materials; physicists use it to explore the basic matter states; and physicians use it to perform medical imaging. A high-performance synchrotron light source is often the workhorse supporting a prosperous multi-disciplinary research center. In China, that is the Shanghai Synchrotron Radiation Facility (SSRF).Since its opening to users in 2009, SSRF has bred many significant scientific achievements and laid the foundation for the Shanghai Zhangjiang Cluster of Big Science Facilities. On 3 August 2021, National Science Review (NSR) interviewed Professor Zhentang Zhao, Director of the SSRF Science Center and vice president of the Shanghai Advanced Research Institute, Chinese Academy of Sciences (CAS). Prof. Zhao introduced the construction and development of the synchrotron light source and X-ray free electron laser facilities in Shanghai, as well as how SSRF experiences may be valuable for big science facilities and centers now under construction in China.

Medium-temperature furnace baking of 1.3 GHz 9-cell superconducting cavities at IHEP

Recently, heat treatment in the range of 250 °C–500 °C has been attempted with the aim of improving the quality factor (Q) of superconducting radio-frequency (SRF) cavities worldwide. Herein, medium-temperature (mid-T) furnace baking experiments were conducted at the Institute of High Energy Physics to obtain higher Q values. First, 1.3 GHz 1-cell cavities received mid-T furnace baking at different temperatures, resulting in not only the improvement of Q but also an anti-Q-slope behavior. Furthermore, mid-T furnace baking was applied to six 1.3 GHz 9-cell cavities, all of which indicated higher Q and anti-Q-slope behavior. The average Q was 3.8 × 1010 at 16 MV m−1. The maximum gradients of the 9-cell cavities were 22.7–26.5 MV m−1. Finally, the mid-T furnace baked 1.3 GHz 9-cell cavities were welded with helium vessel, with no degradation in the vertical tests. In addition, the mid-T furnace baking process was simplified in comparison with European X-ray Free Electron Laser and Linear Coherent Light Source because of the cancellation of light electro-polishing. This simplification is beneficial in the mass production of SRF cavities with high Q, which are widely adopted in free electron lasers and high-energy colliders.

Nonuniform Flow Dynamics Probed by Nanosecond X-Ray Speckle Visibility Spectroscopy.

We report observations of nanosecond nonuniform colloidal dynamics in a free flowing liquid jet using ultrafast x-ray speckle visibility spectroscopy. Utilizing a nanosecond double-bunch mode, the Linac Coherent Light Source free electron laser produced pairs of femtosecond coherent hard x-ray pulses. By exploring anisotropy in the visibility of summed speckle patterns which relates to the correlation functions, we evaluate not only the average particle flow rate in a colloidal nanoparticle jet, but also the nonuniform flow field within. The methodology presented here establishes the foundation for the study of nano- and atomic-scale inhomogeneous fluctuations in complex matter using x-ray free electron laser sources.

Controllable X-Ray Pulse Trains from Enhanced Self-Amplified Spontaneous Emission.

We report the demonstration of optical compression of an electron beam and the production of controllable trains of femtosecond, soft x-ray pulses with the Linac Coherent Light Source (LCLS) free-electron laser (FEL). This is achieved by enhanced self-amplified spontaneous emission with a 2 μm laser and a dechirper device. Optical compression was achieved by modulating the energy of an electron beam with the laser and then compressing with a chicane, resulting in high current spikes on the beam which we observe to lase. A dechirper was then used to selectively control the lasing region of the electron beam. Field autocorrelation measurements indicate a train of pulses, and we find that the number of pulses within the train can be controlled (from 1 to 5 pulses) by varying the dechirper position and undulator taper. These results are a step toward attosecond spectroscopy with x-ray FELs as well as future FEL schemes relying on optical compression of an electron beam.

Binary Amplitude Reflection Gratings for X-ray Shearing and Hartmann Wavefront Sensors.

New, high-coherent-flux X-ray beamlines at synchrotron and free-electron laser light sources rely on wavefront sensors to achieve and maintain optimal alignment under dynamic operating conditions. This includes feedback to adaptive X-ray optics. We describe the design and modeling of a new class of binary-amplitude reflective gratings for shearing interferometry and Hartmann wavefront sensing. Compact arrays of deeply etched gratings illuminated at glancing incidence can withstand higher power densities than transmission membranes and can be designed to operate across a broad range of photon energies with a fixed grating-to-detector distance. Coherent wave-propagation is used to study the energy bandwidth of individual elements in an array and to set the design parameters. We observe that shearing operates well over a ±10% bandwidth, while Hartmann can be extended to ±30% or more, in our configuration. We apply this methodology to the design of a wavefront sensor for a soft X-ray beamline operating from 230 eV to 1400 eV and model shearing and Hartmann tests in the presence of varying wavefront aberration types and magnitudes.

General method to calculate the elastic deformation and X-ray diffraction properties of bent crystal wafers.

Toroidally and spherically bent single crystals are widely employed as optical elements in hard X-ray spectrometry at synchrotron and free-electron laser light sources, and in laboratory-scale instruments. To achieve optimal spectrometer performance, a solid theoretical understanding of the diffraction properties of such crystals is essential. In this work, a general method to calculate the internal stress and strain fields of toroidally bent crystals and how to apply it to predict their diffraction properties is presented. Solutions are derived and discussed for circular and rectangular spherically bent wafers due to their prevalence in contemporary instrumentation.

Injector Design for the MariX-FEL Project

The MariX project (Multi-disciplinary Advanced Infra-structure for Research with X-rays) is a free electron laser (FEL) light source proposed by the INFN-Milan. It will produce highly coherent X-rays, in the range 0.2-8 keV, with ultra-short pulses (10-50 fs) and a repetition rate up to 1MHz. At the same time, MariX will host a compact monochromatic X-ray source, called BriXS (Bright and compact X-ray Source), by using an inverse-Compton scattering scheme, with energies up to 180 keV and a repetition rate of 100 MHz (continuous-wave CW operation) that will generate fluxes up to 1013 photons per second. In this paper, the Radio-Frequency (RF) and beam dynamics designs of the electron injector for the MariX-FEL project are presented. The choice of the main devices, such as the electron gun and the accelerating linear accelerators, as well as the main parameters for CW operation are discussed in detail.

Development Strategy of Free Electron Laser Technology in China

Free electron laser (FEL) is a large-scale scientific research device based on electron linear accelerator and has been widely used in basic scientific research such as condensed matter physics, advanced materials and surface physics, atomic and molecular physics, chemistry, and biology. The advancement of FEL technology will promote the light sources to develop towards higher power and shorter wavelength to satisfy the increasing demands of users. This study introduces the necessity of development based on the characteristics of the FEL technology and summarizes the current development status of the technology in China and abroad. It also analyzes the existing problems in its development in China and proposes ideas and goals for the development of FEL technology in China. By 2035, China should focus on making breakthroughs in long-wave FEL, X-ray FEL, new FEL, and FEL-based extreme ultraviolet (EUV) lithography light source technologies. Based on the research and analysis, this study proposes some suggestions for the steady and healthy development of the FEL technology in China, including making scientific development strategies, raising investment in fundamental research to promote independent innovation, strengthening multi-party cooperation to promote the transformation of scientific and technological achievements, promoting market application, and strengthening personnel training.

Successful sample preparation for serial crystallography experiments.

Serial crystallography, at both synchrotron and X-ray free-electron laser light sources, is becoming increasingly popular. However, the tools in the majority of crystallization laboratories are focused on producing large single crystals by vapour diffusion that fit the cryo-cooled paradigm of modern synchrotron crystallography. This paper presents several case studies and some ideas and strategies on how to perform the conversion from a single crystal grown by vapour diffusion to the many thousands of micro-crystals required for modern serial crystallography grown by batch crystallization. These case studies aim to show (i) how vapour diffusion conditions can be converted into batch by optimizing the length of time crystals take to appear; (ii) how an understanding of the crystallization phase diagram can act as a guide when designing batch crystallization protocols; and (iii) an accessible methodology when attempting to scale batch conditions to larger volumes. These methods are needed to minimize the sample preparation gap between standard rotation crystallography and dedicated serial laboratories, ultimately making serial crystallography more accessible to all crystallographers.

Stimulated X-ray Raman and Absorption Spectroscopy of Iron-Sulfur Dimers.

Iron-sulfur complexes play an important role in biological processes such as metabolic electron transport. A detailed understanding of the mechanism of long-range electron transfer requires knowledge of the electronic structure of the complexes, which has traditionally been challenging to obtain, either by theory or by experiment, but the situation has begun to change with advances in quantum chemical methods and intense free electron laser light sources. We compute the spectra for stimulated X-ray Raman spectroscopy (SXRS) and absorption spectroscopy of homovalent and mixed-valence [2Fe-2S] complexes, using the ab initio density matrix renormalization group algorithm. The simulated spectra show clear signatures of the theoretically predicted dense low-lying excited states within the d-d manifold. Furthermore, the difference in spectral intensity between the absorption-active and Raman-active states provides a potential mechanism to selectively excite states by a proper tuning of the excitation pump, to access the electronic dynamics within this manifold.

Experimental observations of seed growth and accompanying pedestal contamination in a self-seeded, soft x-ray free-electron laser

Measurements of the soft x-ray, self-seeding spectrum at the Linac Coherent Light Source (LCLS) free-electron laser generally display a pedestal-like distribution around the central seeded wavelength. This pedestal limits the spectral purity and can negatively affect some user applications not employing a post-undulator monochromator. In this paper, we investigate the detailed experimental characteristics of both the amplified seed and its accompanying pedestal using data from a number of separate LCLS shifts over the 2015-2018 time period. We find that the amplified seed shows excellent wavelength stability and an exponential growth rate whose dependence upon energy detuning is consistent with theory. The pedestal's spectral distribution and integrated strength vary strongly shot by shot, independent of electron beam energy jitter. Its shot-averaged strength relative to that of the seed grows at least linearly with $z$ and can approach values of 15% or more. The pedestal is comprised of two separate components: (1) normal self-amplified spontaneous emission (SASE) whose total strength is nominally insensitive to energy detuning and laser heater (LH) strength; (2) sideband-like emission whose strength positively correlates with that of the amplified seed and negatively with energy detuning and LH strength. We believe this latter, non-SASE component arises from comparatively long wavelength (i.e., $\ensuremath{\lambda}\ensuremath{\sim}0.3--3\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$) amplitude and phase modulations of the main seeded radiation line. Its shot to shot variability and LH sensitivity suggests an origin connected to growth of the longitudinal microbunching instability on the electron beam.

Focal shift induced by source displacements and optical figure errors.

In this work the longitudinal shifts of the focal plane of an ellipsoidal mirror induced by longitudinal shifts of the source and by the optical figure error of the mirror itself are investigated. The case of an ideal mirror illuminated by a Gaussian beam is considered first, deriving an analytical formula predicting the source-to-focus shift. Then the realistic case of a mirror affected by surface shape defects is examined, by taking into account metrological data and numerically solving the Huygens-Fresnel integral. The analytical and numerical solutions in the ideal and real cases are compared. Finally, it is shown that an additional dependence of the focal shift is introduced on the wavelength and the pointing angle of the source. Both effects are investigated by numerical computations. We limit the treatment in the XUV spectral range, choosing as a test bench the Kirkpatrick-Baez mirror system of the DiProI and LDM end-stations and at the FERMI seeded free-electron laser (FEL). The work is primarily aimed at disentangling the different causes of focal shift at FEL light sources, where source position, wavelength and pointing angle are either tunable or rapidly fluctuating. The method can be easily extended to parabolic reflectors and refractors (lenses) with other kinds of illuminating sources and wavelengths.