White Ash Research Articles

Parasitoids of Agrilus spp. in Europe: Anticipating the arrival of Agrilus planipennis

The emerald ash borer (EAB), Agrilus planipennis, is a woodboring beetle native to East Asia. It is highly invasive in North America, where it causes large-scale dieback of American ash species, Fraxinus spp. EAB is also invasive in Western Russia and Ukraine, and it continues to spread towards Central and Western Europe where all three native ash species are susceptible. Biological control approaches offer sustainable solutions to control invasive pests. In North America, four Asian parasitoid species that have coevolved with EAB have been introduced to control the pest. In Europe, many species of the genus Agrilus occur, and it is likely that at least some of their parasitoids will adopt EAB as a host as it spreads across the continent. However, parasitoids of Agrilus spp., are very poorly known in Europe because of the difficulty of studying the parasitoid complex of these solitary wood boring insects. In this review, we provide a literature overview of studies and records of European parasitoids of Agrilus spp. to provide a basis for future studies on the emerging parasitoid complex of EAB in Europe. Parasitoid records were found for 24 European species of Agrilus. Sixty-four parasitoid species were recorded, mostly larval parasitoids. However, it is likely that several of them are erroneous host-parasitoid associations or misidentifications, and the biology of most species and their role in the population dynamics of their hosts has been poorly studied. It is recommended to conduct pre-emptive studies on these parasitoids and their suitability as potential biological control organisms with EAB.

Evaluating elements of artificial cover object design for terrestrial salamander monitoring

AbstractDeclines in amphibian populations have led to greater research and monitoring of species of interest, including terrestrial salamanders. Several methods have been used to study salamanders, including artificial cover objects (ACOs). Artificial cover objects are easy to install and use, limit destruction to habitats, are easily reproducible both across and within studies, and can reduce variability between observers and sites by not relying on observer search time or effort, or on natural cover. However, different ACO designs and spacing may yield different capture rates, and thus different estimates of population densities. We examined the influence of ACO wood type, size, shape, and spacing arrays on the number of individually marked red‐backed salamanders (Plethodon cinereus) captured under ACOs. White pine (Pinus strobus) ACOs yielded the most (average of 14 across 3 replicates) individuals, while white ash (Fraxinus americana) ACOs had the least (average of 7 across 3 replicates). Larger ACOs had similar capture rates compared to equal sampled areas of smaller ACOs, but a single smaller ACO tended to have fewer individual salamander captures than a single large ACO. Our results suggested that high‐density ACO spacing arrays may increase capture probability but reduce the area uniquely sampled by each ACO. In contrast, low‐density ACO arrays may produce population estimates more comparable to other arrays. Future studies should consider monitoring goals and available sampling effort when choosing a spacing array. As ACO study design impacts salamander capture rates, a clear understanding of the effects of each element of ACO design is important when drawing inferences or making comparisons among studies.

Effect of Herbivory on the Nutritional Value of Six Hardwood Species for White-Tailed Deer in the Allegheny Forest

Abstract Herbivores alter plant quantity and quality through direct tissue consumption and indirectly via the structural and chemical allocational strategies plants deploy in response to herbivory. Herein, we examine how browsing by white-tailed deer Odocoileus virginianus alters nutritional quality of six regenerating hardwood species: red maple Acer rubrum, black cherry Prunus serotina, birch Betula spp., pin cherry Prunus pennsylvanica, white ash Fraxinus americana, and American beech Fagus grandifolia. Using an established, large-scale experiment that manipulated deer access to fenced plots, we tested whether browsing altered the nutritional quality and biomass as well as nutritional capacity to support deer of six hardwood species in an early successional hardwood forest of Pennsylvania, USA. Pin cherry was the most nutritious of the six species, with greater dry matter digestibility and digestible protein and lesser neutral detergent fiber. Areas exposed to browsing had less browse biomass of stems and leaves yet greater digestible protein, an effect driven by digestible protein of pin cherry. We found no effect of browsing on neutral detergent fiber or dry matter digestibility. Although deer browsing reduced biomass of the six hardwood species, it did not alter the nutritional capacity to support lactating females in the summer. Our results confirm that browsing limits tree regeneration and available browse and provides conservative conclusions on how deer can alter their diet quality.

Tree species richness and ash density have variable effects on emerald ash borer biological control by woodpeckers and parasitoid wasps in post-invasion white ash stands.

Emerald ash borer (EAB) (Agrilus planipennis Fairmaire) (Coleoptera: Buprestidae) is the most destructive insect to invade North American forests. Identifying habitat features that support EAB natural enemies is necessary to enhance EAB biological control. In many forest ecosystems, tree species diversity has been linked with reduced pest abundance and increases in natural enemy abundance. We assessed the influence of tree species richness, ash density, and proportion of total ash basal area on ash canopy condition, EAB larval densities, and biocontrol by woodpeckers and parasitoids in pairs of healthy and declining overstory (DBH > 10 cm) and recruit-sized ash (DBH 2-10 cm) in 4 post-invasion forests in Michigan, USA. Tree species richness and ash density were not significantly associated with EAB larval densities, ash canopy dieback and transparency, and woodpecker predation of EAB larvae. In declining and healthy overstory ash, woodpeckers killed 38.5 ± 3.9% and 13.2 ± 3.7% of larvae, respectively, while the native parasitoid Phasgonophora sulcata Westwood killed 15.8 ± 3.8% and 8.3 ± 3.0% and the introduced parasitoid Spathius galinae Belokobylskij & Strazanac killed 10.8 ± 2.5% and 5.0 ± 2.6% of EAB larvae. Parasitism by P. sulcata was inversely related to ash density while parasitism by S. galinae was positively associated with ash density. Ash density, but not tree diversity, appears to differentially influence biological control of EAB by parasitoids, but this effect is not associated with reduced EAB densities or improved canopy condition.

The complete genome of "Candidatus Phytoplasma fraxini" AshY1 from the ash yellows group.

The complete genome of "Candidatus Phytoplasma fraxini" AshY1, originating from Fraxinus americana in North America, was assembled using long reads from single-molecule real-time sequencing technology. The chromosome of 598 kb provides insights into the effector repertoire of a phytopathogenic bacterium from the 16SrVII phytoplasma group.

Application of multi-temporal satellite imagery for urban tree species identification

Accurate tree inventories are critical for urban forest management but challenging to obtain, as many urban trees are on private property (backyards, etc.) and are excluded from public inventories. Here, we examined the feasibility of tree species identification in a large heterogenous urban area (>850 km2) by using multi-temporal PlanetScope images (3.2 m resolution, multi-spectral) and inventory data from more than 20,000 ground observations within the urban forest of the Greater Chicago area. Our approach achieved an overall classification accuracy of 0.60 and 0.71 for 18 species and ten genera, respectively, but varied from moderate to high for certain species (0.59–0.92) and genera (0.61–0.91). In particular, we identified key host tree species (Fraxinus americana, F. pennsylvanica, and Acer saccharinum) for two damaging invasive insects, emerald ash borer (EAB, Agrilus planipennis) and Asian longhorn beetle (ALB, Anoplophora glabripennis), with over 0.80 accuracies. In addition, we demonstrated that including images from the autumn months (September–November), either for a single-season model or a combined multiple-season model, improved the identification accuracy of temperate deciduous trees. Further, the high classification accuracy of support vector machine (SVM) over random forest (RF) and neural network (NN) approaches suggests that future work might benefit from comparing multiple classification methods to select the approach that maximizes species classification accuracy. Our study demonstrated the potential for applying multi-temporal high-resolution images in urban tree classification, which can be used for urban forest management at a large spatial scale.

Species features of bioaccumulation of heavy metals in leaves of poplar Populus canadensis Moench and ash Fraxinus americana L. in the urban ecosystem

Species features of bioaccumulation of heavy metals in leaves of poplar Populus canadensis Moench and ash Fraxinus americana L. in the urban ecosystem

Optimizing Identification of Allergic Sensitization to Seasonal Inhalant Allergens in the USA: Implications for Constructing Optimal Panels to Evaluate Patients with Allergy

Introduction: While a specific number and type of antigens are recognized to detect perennial inhalant allergies, the optimal number and combination of allergens to reliably identify seasonal allergic sensitization is unclear due to limited national data. This study analyzed aeroallergen testing data from a large US clinical reference laboratory to provide guidance for optimizing seasonal allergen test selection. Methods: The 2019 serum IgE tests for seasonal inhalant allergens were identified from the Quest Diagnostics database. Patients with results for at least 1 of 31 seasonal allergens across 4 allergen classes (11 trees, 7 weeds, 5 grasses, and 8 molds) were analyzed. A step-by-step conditional approach was employed to determine the minimum number and species of allergens needed to identify at least 98% of sensitized patients for each class. Results: Of 88,042 patients tested for ≥1 seasonal allergen, 1.5%, 1.8%, 1.3%, and 1.6% were tested for all trees, weeds, grasses, and molds, respectively. Of those tested for all allergens within a class, 40.4%, 38.6%, 29.5%, and 21.2% were sensitized to at least one tree, weed, grass, or mold allergen, respectively. Identification of ≥98% of sensitized patients within a class required 8 allergens for trees (mountain cedar, maple box elder, walnut, white ash, elm, birch, cottonwood, and hickory/pecan), 5 for weeds (common ragweed short, rough pigweed, English plantain, lamb's quarters/goosefoot, and Russian thistle), 3 for grasses (June/Kentucky blue grass, Johnson grass, and Bermuda grass), and 7 for molds (Alternaria alternata, Aspergillus fumigatus, Mucor racemosus, Epicoccum purpurascens, Penicillium notatum, Helminthosporium halodes, and Fusarium moniliforme). Conclusion: A minimum of 23 antigens is required to optimally detect sensitization to four classes of seasonal allergens (i.e., ≥98% identification). The addition of these allergens to unique perennial allergens (cat, dog, mouse, cockroach, and 2 dust mite species) results in a comprehensive elucidation of inhalant allergen sensitization. This knowledge provides a pivotal guide for clinical laboratories as they construct allergen panels to optimize diagnostic yield.

Gene flow from Fraxinus cultivars into natural stands of Fraxinus pennsylvanica occurs range-wide, is regionally extensive, and is associated with a loss of allele richness.

In North America, a comparatively small number of Fraxinus (ash) cultivars were planted in large numbers in both urban and rural environments across the entire range of Fraxinus pennsylvanica Marsh (green ash) over the last 80 years. Undetected cultivar gene flow, if extensive, could significantly lower genetic diversity within populations, suppress differentiation between populations, generate interspecific admixture not driven by long-standing natural processes, and affect the impact of abiotic and biotic threats. In this investigation we generated the first range-wide genetic assessment of F. pennsylvanica to detect the extent of cultivar gene flow into natural stands. We used 16 EST-SSR markers to genotype 48 naturally regenerated populations of F. pennsylvanica distributed across the native range (1291 trees), 19 F. pennsylvanica cultivars, and one F. americana L. (white ash) cultivar to detect cultivar propagule dispersal into these populations. We detected first generation cultivar parentage with high confidence in 171 individuals in 34 of the 48 populations and extensive cultivar parentage (23-50%) in eight populations. The incidence of cultivar parentage was negatively associated with allele richness (R2 = 0.151, p = 0.006). The evidence for a locally high frequency of cultivar propagule dispersal and the interspecific admixture in eastern populations will inform Fraxinus gene pool conservation strategies and guide the selection of individuals for breeding programs focused on increasing resistance to the emerald ash borer (Agrilus planipennis Fairmaire), an existential threat to the Fraxinus species of North America.

Application of micro-computed tomography (μCT)in quantifying xylem vessels of broadleaved trees

Quantitative analysis of vessel characteristics at the cellular scale is of great significance for understan-ding plant adaptation strategies to environment. The direct grinding combined with stereo-microscope imaging is one of the main approaches to examine the anatomical structure of xylem (conifer tracheid and hardwood vessel) wood structure, which inevitably damages xylem cells, hindering the accurate understanding of anatomical structures. In this study, we applied X-ray micro-computed tomography (μCT) and stereo-microscope technology to quantitatively measure the diameter and area of vessels of seven Canadian broadleaved tree species (Acer saccharum, Betula papyrifera, Fraxinus americana, Ostrya virginiana, Populus grandidentata, Quercus rubra, and Carya cordiformis). We fitted the results by linear model and tested the feasibility of μCT technology in quantifying the vessel size of broadleaved species. We found that the results of the two methods for measuring vessel size were highly similar (R2=0.98). The goodness of fit of the vessel diameter results measured by the two methods for the ring-porous wood species (C. cordiformis, R2=0.98; F. americana, R2=0.96; Q. rubra, R2=0.99) was higher than that of the diffuse-porous wood species (B. papyrifera, R2=0.88; O. virginiana, R2=0.73; A. saccharum, R2=0.68; P. grandiden-tata, R2=0.88). The goodness of fit of small vessels (diameter≤200 μm, R2=0.94) measured by the two methods was higher than that of large vessels (diameter>200 μm, R2=0.92). Thus, the μCT technique provided a new non-destructive detection method for quantifying xylem vessels of broadleaved tree species.

CentralBark Image Dataset and Tree Species Classification Using Deep Learning

The task of tree species classification through deep learning has been challenging for the forestry community, and the lack of standardized datasets has hindered further progress. Our work presents a solution in the form of a large bark image dataset called CentralBark, which enhances the deep learning-based tree species classification. Additionally, we have laid out an efficient and repeatable data collection protocol to assist future works in an organized manner. The dataset contains images of 25 central hardwood and Appalachian region tree species, with over 19,000 images of varying diameters, light, and moisture conditions. We tested 25 species: elm, oak, American basswood, American beech, American elm, American sycamore, bitternut hickory, black cherry, black locust, black oak, black walnut, eastern cottonwood, hackberry, honey locust, northern red oak, Ohio buckeye, Osage-orange, pignut hickory, sassafras, shagbark hickory silver maple, slippery elm, sugar maple, sweetgum, white ash, white oak, and yellow poplar. Our experiment involved testing three different models to assess the feasibility of species classification using unaltered and uncropped images during the species-classification training process. We achieved an overall accuracy of 83.21% using the EfficientNet-b3 model, which was the best of the three models (EfficientNet-b3, ResNet-50, and MobileNet-V3-small), and an average accuracy of 80.23%.

Belowground exploration by trees and shrubs

Unlike trees, shrubs (i.e., multiple-stemmed woody plants) do not need evenly spaced large diameter structural roots and therefore should be more responsive to heterogeneous distributions of soil resources and spread further per unit belowground biomass. We therefore hypothesized that compared to trees, shrubs respond more to asymmetric distributions of nutrients, reach nutrient-rich patches of soil faster, and do so with less below-ground biomass. To test these three hypotheses, we planted individual seedlings of shrubs (Cornus racemosa, Rhus glabra, and Viburnum dentatum) and trees (Acer rubrum, Betula populifolia, and Fraxinus americana) in the centers of sand-filled rectangular boxes. In one direction we created a stepwise gradient of increasing nutrients with slow-release fertilizer; in the other direction, no fertilizer was added. Seedlings were harvested when their first root reached the plexiglass-covered fertilized end of their box; time taken, above-ground biomass, and below-ground biomass per nutrient segment were determined. Shrubs and trees did not consistently differ in precision of root foraging (i.e., the ratio of biomass in the fertilized and unfertilized soil) or in rates (g/day) and efficiencies (cm/day) of lateral root growth. Interspecific variation appeared more related to species’ habitats than to growth form. The fastest and most efficient roots were produced by the shrub (R. glabra) and the tree (B. populifolia), both characteristic of poor and heterogeneous soils. Root foraging by R. glabra was also facilitated by rapid rhizomatous expansion.

Conservation of Green and White Ash Germplasm Using the Cryopreservation of Embryogenic Cultures

Green ash (Fraxinus pennsylvanica) and white ash (F. americana) populations are currently experiencing major declines across their native ranges in North America due to infestation by the exotic insect pest emerald ash borer (Agrilus planipennis). The development of a reliable method for the long-term storage of green and white ash germplasm in the form of embryogenic cultures using cryopreservation would be a considerable aid to ash conservation efforts. We compared recovery percentages of cryopreserved green and white ash embryogenic cultures using vitrification versus slow cooling methods. Three Plant Vitrification Solution 2 (PVS2) exposure durations (40, 60, and 80 min) for vitrification and three DMSO concentrations (5%, 10%, and 15%) for slow cooling were tested for their effects on the percentage of cultures that regrew following cryostorage. Vitrification resulted in a higher overall culture recovery percentage (91%) compared to cultures that were cryostored using the slow cooling approach (39%), and a more rapid initiation of regrowth (5 days versus 2–3 weeks) resulted. Recovery from cryostorage by cultures using the slow cooling approach varied significantly (p < 0.05) between experiments and with genotype (p < 0.05). The recovery of vitrified tissue from cryostorage did not vary with genotype, species, or PVS2 exposure duration (p > 0.05). The vitrification cryopreservation protocol provides a reliable and versatile alternative to the traditional slow cooling method, strengthening our ability to preserve valuable ash germplasm for conservation and restoration.

Allometric equations for estimating aboveground biomass carbon in five tree species grown in an intercropping agroforestry system in southern Ontario, Canada

Allometric equations were developed for estimating aboveground biomass carbon (AGBC) in five tree species grown in a tree-based intercropping system at the University of Guelph Agroforestry Research Station, Guelph, Ontario, Canada. A total of 66 representative trees from five species: red oak (Quercus rubra) [n = 12], black walnut (Juglans nigra) [n = 16], black locust (Robinia pseudoacacia) [n = 10], white ash (Fraxinus americana) [n = 15], Norway spruce (Picea abies) [n = 13] were selected, harvested and their aboveground biomass and carbon content were quantified. Three commonly used allometric models were used to develop predictive equations. Regression models were developed and parameterized for each tree species and the best are presented based on information criteria (AIC, AICc, and BIC), mean absolute percentage error (MAPE), over/under estimation (MOUE), root mean square error (RMSE), R2, and regression coefficients (a, b) of the observed/predicted (OP) linear regression analysis. All equations with diameter at breast height (D) only and D and tree height (H) as the predictor variables fitted the AGBC data well, with R2 > 97% and RMSE < 40. However, a power model using D as the only predictor is recommended as the best model for black walnut, black locust, white ash, and Norway spruce. The models presented are the best fitted allometric equations for the indicated species and are recommended for these species, growing on similar soils under the same temperate conditions at densities of < 125 tree per hectare.

High quality genomes produced from single MinION flow cells clarify polyploid and demographic histories of critically endangered Fraxinus (ash) species

With populations of threatened and endangered species declining worldwide, efforts are being made to generate high quality genomic records of these species before they are lost forever. Here, we demonstrate that data from single Oxford Nanopore Technologies (ONT) MinION flow cells can, even in the absence of highly accurate short DNA-read polishing, produce high quality de novo plant genome assemblies adequate for downstream analyses, such as synteny and ploidy evaluations, paleodemographic analyses, and phylogenomics. This study focuses on three North American ash tree species in the genus Fraxinus (Oleaceae) that were recently added to the International Union for Conservation of Nature (IUCN) Red List as critically endangered. Our results support a hexaploidy event at the base of the Oleaceae as well as a subsequent whole genome duplication shared by Syringa, Osmanthus, Olea, and Fraxinus. Finally, we demonstrate the use of ONT long-read sequencing data to reveal patterns in demographic history.

Dimensional stability and equilibrium moisture content of thermally modified hardwoods

The dimensional stability and equilibrium moisture content (EMC) of thermally modified hardwoods were studied. Lumber of yellow-poplar (Liriodendron tulipifera); red oak (Quercus borealis); white ash (Fraxinus americana), red maple (Acer rubrum); hickory (Carya glabra), and black cherry (Prunus serotina) were modified in industrial thermo-vacuum system. The water absorption rate, EMC, swelling, anti-swelling efficiency, shrinkage, anti-shrinkage efficiency, and anisotropy of the specimens were measured and compared to unmodified wood. The results show that thermal modification significantly decreased water absorption of wood which leads to improved dimensional stability. Specifically, thermally modified wood showed reduced EMC (22% in hickory to 59% in red maple), increased water absorption repellent (14.9% in black cherry to 29.6% in yellow-poplar), increased anti-swelling efficiency (14.2% in hickory to 71.4% in ash), increased anti-shrinkage efficiency (23.5% in red maple to 65.6% in ash), and reduced anisotropy coefficient (4.7% in red oak to 31.9% in black cherry).

Analysis of the materials and processes of hanging sculptures in Guanyin Hall

Changzhi Guanyin Hall, a folk temple from the Ming Dynasty, embodies the essence of the ‘unity of the three religions’ philosophy, centred around Guanyin Bodhisattva. Over 500 sculptures reside within a modest 70 m2 space, encompassing representations from Confucianism, Buddhism and Taoism. Ranging from a towering 2 m to a mere 10 cm, these sculptures depict an array of characters and mythological scenes, bestowing considerable importance upon the painted sculptures of Guanyin Hall. Varying degrees of deterioration have affected these sculptures due to the passage of time and suboptimal preservation conditions, highlighting the imperative need for meticulous restoration efforts. However, the absence of comprehensive analyses pertaining to the production process of Guanyin Hall sculptures has hindered the restoration groundwork. This study focuses on fallen hanging sculptures and debris, encompassing intact sculptures, clay fragments, wooden sticks, plant fibres, wires and pigments. Employing a series of techniques, including X-ray photography, microscopic analysis, mineral analysis (MLA), laser particle size testing, ion chromatography, X-ray fluorescence spectroscopy (XRF), X-ray diffractometer (XRD) and energy dispersive spectrometer (SEM–EDS) analysis, this research characterises the constituent materials used in crafting these artifacts. Instead of a full-body skeleton, the findings reveal that the small hanging sculpture is supported by delicate wires that hold specific areas, such as the arms and the gown hems. The hanging sculptures are made from a single type of clay and are reinforced with either mulberry bast or wheat straw fibres. A Pinaceae wood stick affixes the head to the body, and the sculpture is then suspended on the wall through nails inserted into the feet. The moulded clay undergoes a sequence of carving, drying and polishing and is coated with a white ash layer before receiving intricate painting. Mineral pigments, including cinnabar, red lead, iron red, cerussite, atacamite, brochantite and azurite, adorn the surface of the sculptures, with gold foil embellishing the golden elements. The intricate artisanry and multifaceted material composition of Guanyin Hall’s painted sculptures render them unparalleled artistic treasures, not solely within Shanxi but across the entire nation. Furthermore, this study establishes a dependable foundation for conservation and restoration endeavours.

Synthesis of White Silica From “Joha Rice Husk” (A Special Rice Variety of Assam, India), Characterization and Determination of Its Point of Zero Charge (pHPZC)

In this study, the rice husk (RH) of “Joha rice” a unique rice variety of Assam (Northeast India) has been used as raw materials for synthesis of ash and silica powder. The combustion of the husk at 500°C for 1 h followed by further treatment at 800°C for 2 h in muffle furnace produces white rice husk ash (RHA). One part of RHA was kept as untreated, and the another part was acid treated. Silica was extracted from the untreated ash in the form of sodium silicate by treating with 2.5M NaOH at the boiling temperature. Then, silica was precipitated from sodium silicate by slow addition of 2.5M H2SO4. The broad x‐ray diffraction (XRD) pattern and characteristic peaks at d‐spacing, 8.3792 and 4.1489 with specific 2θ at ∼21.3° reveal the presence of amorphous SiO2 as major phase in the ash (both acid treated and untreated). The characteristic Fourier transform infrared (FTIR) spectroscopic peaks at 470–450, 801, and 1100 cm−1 for different modes of Si‐O‐Si vibrations also support the presence of silica. The scanning electron micrographs (SEMs) revealed the morphology of the RHA as fine particles undergoing agglomeration probably due to hydrogen bonding between surface silanol groups present. The irregular rough morphology is a characteristic of the amorphous nature of the samples. The energy‐dispersive X‐ray analysis (EDX) showed that RHA composition was dominated by elements Si and O for both untreated and acid‐treated samples. For acid‐treated sample, the amount of Si and O is found to be comparatively higher than the untreated one due to surface cleaning. The point of zero charge (pHPZC) of the prepared samples was determined by a simple pH metric method. The pHPZC of the untreated RHA was found to be ∼ 9.8 ± 0.2. However, almost similar pHPZC values of the acid‐treated RHA silica and commercial silica (∼6.6 ± 0.2) indicate the effectiveness of acid treatment prior processing.

Health status of the field protective forest belts in Dobrudzha &amp;ndash; results from the monitoring carried out in 2022

In 2022, the health status of the field protective forest belts on the territory of the State Hunting Enterprise Balchik and State Forest Enterprises General Toshevo and Dobrich was monitored. The assessment of tree crown condition covered 7069.3 ha (66% of all field protective belts in Bulgaria). The results showed that 70% of monitored belts were in good condition, 23% - in moderate condition, and 7% - in poor condition. Since 2014 the area of the protective forest belts in poor condition has increased 2.6 times, and 76% of them were situated in Dobrudzha region. Ash belts &amp;ndash; Fraxinus excelsior (66% of all belts) and Fraxinus americana (10%) were in the worst conditon. In ash belts a process of crown dieback, premature falling of leaves and drying of whole trees were observed. In individual ash belts, drying reached up to 80% of tree crowns, regardless of their age and origin. The drying was mostly due to the biotic factors &amp;ndash; insect pests and fungal pathogens. The protective forest belts of Quercus cerris, Q. petraea, Q., rubra and Gleditschia triacanthos stand out as sustainable tree species. It is necessary to significantly upgrade the methodology by which the monitoring of the health status of trees in the field protective forest belts is currently carried out. In the new methodology a detailed description of the type of data that need to be collected, the methods of assessments, and data reporting formats, have to be included.

Рівні накопичення важких металів та активності радіонуклідів у вузькопалих річкових раках (Astacus leptodactylus Eschscholtz, 1823) Кам’янського та Запорізького (Дніпровського) водосховищ

Purpose. To determine the content of heavy metals as well as natural and artificial radionuclides in muscle tissue and carapaces of narrow-clawed crayfish Astacus leptodactylus of the Kamianske and Zaporizhzhia (Dnipro) reservoirs. Methodology. The material for the study were narrow-clawed crayfish collected in the spring period (March-April) 2021 in the coastal zone of the Kamianske and Zaporizhzhia (Dnipro) reservoirs. The collection of material was carried out with standard open-type crayfish traps with a mesh size No. 20, manual collection in the littoral zone as well as with the help of special baited traps. Carapaces and muscle tissue of crayfish were used to determine the content of heavy metals and radionuclides. Preparation of samples for measuring the content of heavy metals and radionuclides was carried out by separating crayfish tissues with subsequent homogenization and concentration (drying and incineration) of the collected material. The samples were dried at a temperature of +105°С to a constant weight, and then incinerated at a temperature of +450°С to obtain white ash. The content of radionuclides was determined on a gamma-beta spectrometer SE-BG-01 “AKP”. The content of heavy metals was determined on an atomic absorption spectrophotometer C115-M1 with a flame analyzer. Findings. Zn, Fe, and Cu were actively accumulated in the muscle tissue of crayfish of the Kamianske and Zaporizhzhia (Dnipro) reservoirs. This fact is explained by the intensive accumulation of elements in crayfish body that actively occurred in the course of physiological processes. Heavy metals such as Mn, Pb, Co were the most accumulated in crayfish carapace. The minimum content of heavy metals was found for Сd. It was found that Pb, Cu, Zn and Cd contents exceed the MACs in muscles of crayfish of the Zaporizhzhia (Dnipro) reservoir by 8, 6, 6.2 and 1.65 times, respectively. The norms for the content of heavy metals in the muscle tissue of river crayfish have not been established in Ukraine today, however, a comparison of the data we obtained with the norms for live fish shows a significant excess for almost all heavy metals examined. It was found that the level of radionuclide activity of in the muscle tissue of decapods of both investigated reservoirs was due to 40K, in the carapaces - 226Ra; 90Sr activity was minimal in muscles, and 226Ra activity in carapaces. Accumulation of studied radionuclides in crayfish did not exceed the MACs for crayfish as a food product. Originality. For the first time, the levels of accumulation of heavy metals and the activity of radionuclides in the muscle tissue and carapace of narrow-clawed crayfish of the Kamianske and Zaporizhzhia (Dnipro) reservoirs were determined. The content of toxic elements that are subject to control in food raw materials and food products according to the MACs in crayfish of the Kamianske and Zaporizhzhia (Dnipro) reservoirs was determined. Practical value. The results of the work can be used during monitoring of the ecotoxicological and radioecological conditions of the aquatic environment. Also, the obtained results can be applied in the study of narrow-clawed crayfish of the Dnieper River basin. Keywords: heavy metals, radionuclides, accumulation coefficient, MAC, crayfish, Zaporizhzhia (Dnipro) Reservoir, Kamianske Reservoir.