Fragmented Microplastics Research Articles

Fate and transport of fragmented and spherical microplastics in saturated gravel and quartz sand.

Microplastics in urban runoff undergo rapid fragmentation and accumulate in the soil, potentially endangering shallow groundwater. To improve the understanding of microplastic transport in groundwater, column experiments were performed to compare the transport behavior of fragmented microplastics (FMPs ∼1-µm diameter) and spherical microplastics (SMPs ∼1-, 10-, and 20-µm diameter) in natural gravel (medium and fine) and quartz sand (coarse and medium). Polystyrene microspheres were physically abraded with glass beads to mimic the rapid fragmentation process. The experiments were conducted at a constant flow rate of 1.50 m day-1 by injecting two pore volumes of SMPs and FMPs. Key findings indicate that SMPs showed higher breakthrough, compared to FMPs in natural gravel, possibly due to size exclusion of the larger SMPs. Interestingly, FMPs exhibited higher breakthrough in quartz sand, likely due to tumbling and their tendency to align with flow paths, while both sizes (larger and smaller relative to FMPs) of SMPs exhibited higher removal in quartz sand. Therefore, an effect due to shape and size was observed.

Characteristics, sources and potential ecological risk of atmospheric microplastics in Lhasa city

Atmospheric microplastics are important contributors to environmental contamination in aquatic and terrestrial systems and pose potential ecological risks. However, studies on atmospheric microplastics are still limited in urban regions of the Tibetan Plateau, a sentinel region for climate and environmental change under a warming climate. In this study, the occurrence and potential ecological risk of atmospheric microplastics were investigated in samples of suspended atmospheric microplastics collected in Lhasa city during the Tibetan New Year in February 2023. The results show that the average abundance of atmospheric microplastics in Lhasa was 7.15 ± 2.46 MPs m−3. The sizes of the detected microplastics ranged from 20.34 to 297.18 μm, approximately 87% of which were smaller than 100 μm. Fragmented microplastics (95.76%) were the dominant shape, followed by fibres (3.75%) and pellets (0.49%). The primary polymer chemical components identified were polyamide (68.73%) and polystyrene (16.61%). The analysis of meteorological data and the backwards trajectory model indicated the air mass in Lhasa mainly controlled by westwards, and the atmospheric microplastics mainly originated from long-distance atmospheric transport. The potential ecological risk index assessment revealed that the atmospheric microplastic pollution in Lhasa was relatively low. This study provides valuable insights and a scientific foundation for future research on the prevention and control of atmospheric microplastic pollution in Lhasa and other ecologically sensitive cities.

Rapid Mass Conversion for Environmental Microplastics of Diverse Shapes.

Rivers have been recognized as the primary conveyors of microplastics to the oceans, and seaward transport flux of riverine microplastics is an issue of global attention. However, there is a significant discrepancy in how microplastic concentration is expressed in field occurrence investigations (number concentration) and in mass flux (mass concentration). Of urgent need is to establish efficient conversion models to correlate these two important paradigms. Here, we first established an abundant environmental microplastic dataset and then employed a deep neural residual network (ResNet50) to successfully separate microplastics into fiber, fragment, and pellet shapes with 92.67% accuracy. We also used the circularity (C) parameter to represent the surface shape alteration of pellet-shaped microplastics, which always have a more uneven surface than other shapes. Furthermore, we added thickness information to two-dimensional images, which has been ignored by most prior research because labor-intensive processes were required. Eventually, a set of accurate models for microplastic mass conversion was developed, with absolute estimation errors of 7.1, 3.1, 0.2, and 0.9% for pellet (0.50 ≤ C < 0.75), pellet (0.75 ≤ C ≤ 1.00), fiber, and fragment microplastics, respectively; environmental samples have validated that this set is significantly faster (saves ∼2 h/100 MPs) and less biased (7-fold lower estimation errors) compared to previous empirical models.

Comparative study on physicochemical characteristics of atmospheric microplastics in winter in inland and coastal megacities: A case of Beijing and Shanghai, China

Atmospheric microplastics (MPs) have received global attention across various sectors of society due to their potential negative impacts. This study aims to understand the physicochemical characteristics of MPs in inland and coastal megacities for raising awareness about the urgent need to reduce plastic pollution. Laser Direct Infrared Imaging (LDIR) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDX) techniques were employed to characterize atmospheric MPs in megacities (inland megacity Beijing and coastal megacity Shanghai) in China, focusing on their physicochemical characteristics, including compositional types, number concentration, morphology, size, possible sources, and potential health risks. The LDIR analysis identified sixteen different types of MPs present in the atmospheres of Beijing and Shanghai. The number concentration of atmospheric MPs in Beijing (3.0 items/m3) is 1.8 times that of Shanghai (1.7 items/m3). The study found that the variations in MP pollution between Beijing and Shanghai are influenced by the urban industrial structure and geographical location. Morphological analysis indicates that fragment MPs have the highest relative abundance in Beijing, while fibrous MPs dominate the atmosphere of Shanghai. Additionally, the study assessed the potential health risks of atmospheric MPs to urban residents. The results suggest that residents of Beijing face more severe health risks from atmospheric MPs compared to those in Shanghai. These findings underscore the urgency to address the issue of atmospheric MPs and provide crucial evidence for the formulation of relevant environmental and health policies.

Fate and potential risks of microplastic fibers and fragments in water and wastewater treatment processes

Water and wastewater treatment plants (WWTPs) receive various types of microplastics (MPs), with fibers and fragments being dominant shapes. Here we investigated the removal behavior and transformation of MPs (polypropylene and polyethylene terephthalate fibers and fragments) in simulated water and wastewater treatment units, including activated sludge process, coagulation, sand filtration, and advanced oxidation/disinfection. Sand filtration demonstrated the highest average efficiency in removing MPs (98 %), followed by activated sludge process (61 %) and coagulation (55 %), which was associated with their physicochemical properties (shape, size, density, surface functional groups, etc). In activated sludge process and coagulation, the polymer type had a greater impact on the removal of MPs than the particle shape, while in sand filtration, the particle shape played a more important role. When subjected to the long-term operation and backwashing of sand filters, approximately 15 % of the initially filtered fragments broke through the sand media, with nearly no fibers escaping. UV-based advanced oxidation and chlorination induced the leaching of dissolved organic matters with different molecular characteristics from fragment MPs, resulting in varying levels of cytotoxicity and bacterial toxicity. Our study provides important information for predicting the fate of MPs and mitigating their impacts in WWTPs.

Bioaccumulation, microbiome composition and immunity, and epigenetic signatures associated with exposure to spherical, fibrous, and fragmented microplastics in the mussel Mytilus galloprovincialis

Microplastic (MP) pollution has become a major global concern due to the widespread use and discharge of plastics into the environment. However, very few studies have assessed the potential variations in the toxicity of MPs according to their shape and size. Therefore, our study sought to identify the biotoxic effects of spherical, fiber-shaped, and fragment-shaped polyethylene terephthalate MPs of different sizes at different concentrations on the Mediterranean mussel Mytilus galloprovincialis. The survival rate after exposure to small-sized MPs was lower than that observed for the larger type MPs. Bioaccumulation of MPs was different depending on the exposure periods and MP shapes. Interestingly, the fiber-shaped MPs underwent morphological modifications in the mussel body upon uptake. MP exposure also increased the global DNA methylation levels (i.e., an epigenetic signature), expression of the microbiota immunity-related toll-like receptor gene, and alteration of the gut microbial composition in the mussel. These findings indicated that MPs of different shapes and sizes at different concentrations can alter the bioaccumulation sensitivity of mussels according to the exposure periods, and the balance of gut immunity and epigenetic process. Furthermore, our results demonstrated that MPs of different shapes, particularly fiber types, can undergo morphological modification in mussel tissues, thus posing a hazardous threat.

Toxicity of nanofibers on zebrafish embryogenesis – Impact of materials properties on inflammatory responses

Textile microfibers are the most common form of microplastic pollution and among the most dangerous to wildlife across multiple biomes. Besides toxicological challenges arising from their shapes, the morphology of fibrous materials make them excellent adsorbents and transportation media for harmful chemical pollutants and support both uptake and bioaccumulation across living organisms. The fragmentation of microfibers used in the textile industry is shown to lead to the formation of a broad range of sub-micron and nanofibers, with greater surface to volume ratio and much finer diameters, whose toxicity and environmental impact are not yet understood. Here, the impact of nanofibers on zebrafish embryos is studied to reveal risks associated with nanofiber pollution during early developmental stages. Exposure of embryos to nanofibers at a similar concentration to what has been observed in polluted water streams was found to dramatically increase apoptosis, neutrophils, and cytokine production that the chorion was unable to protect against. Furthermore, disturbed vascular basement membrane assembly in exposed embryos was detected leading to an expanded dorsal aorta diameter. These results obtained with model nanofibers demonstrate the risks of fragmented microplastics and the impact of surface properties on uptake and response by living organisms.

Abundance and distribution of microplastics in seawater, sediment, and macroalgae sea grapes Caulerpa racemosa from Semak Daun Island, Jakarta Bay, Indonesia

Abstract. Patria MP, Kholis N, Anggreini D, Buyong F. 2023. Abundance and distribution of microplastics in seawater, sediment, and macroalgae sea grapes Caulerpa racemosa from Semak Daun Island, Jakarta Bay, Indonesia. Biodiversitas 24: 3424-3430. Microplastic pollution in marine ecosystems poses a significant global concern, specifically regarding the security of food derived from the sea. Macroalgae, as a food source from the sea, can be susceptible to contamination by microplastics. This research assessed the abundance and forms of microplastics in macroalgae sea grapes (Caulerpa racemosa (Forssk.) J.Agardh) collected from Semak Daun Island within the Seribu Island National Park. Additionally, the impact of washing and stirring on microplastic abundance was examined in macroalgae. The average number of microplastics and their identification showed that the washed, stirred, and NaOH-treated macroalgae samples contained an average abundance of 3.28±0.31 particles/g, 5.06±0.59 particles/g, and 2.0±0.81 particles/g, respectively. Furthermore, microplastics were detected in seawater and sediment samples, with an average abundance of 8.2±2.19 particles/L and 15,200±4,932 particles/Kg, respectively. Fragmented microplastics were the predominant form in macroalgae, while fibrous microplastics dominated seawater and sediment samples. Significant differences were observed between the washed and stirred samples (p = 0.009), where the stirred sample exhibited a higher reduction percentage. Microplastics in edible macroalgae indicated the potential hazards of exposure and subsequent accumulation in the human body.

Light-Powered Self-Adaptive Mesostructured Microrobots for Simultaneous Microplastics Trapping and Fragmentation via in situ Surface Morphing.

Microplastics, which comprise one of the omnipresent threats to human health, are diverse in shape and composition. Their negative impacts on human and ecosystem health provide ample incentive to design and execute strategies to trap and degrade diversely structured microplastics, especially from water. This work demonstrates the fabrication of single-component TiO2 superstructured microrobots to photo-trap and photo-fragment microplastics. In a single reaction, rod-like microrobots diverse in shape and with multiple trapping sites, are fabricated to exploit the asymmetry of the microrobotic system advantageous for propulsion. The microrobots work synergistically to photo-catalytically trap and fragment microplastics in water in a coordinated fashion. Hence, a microrobotic model of "unity in diversity" is demonstrated here for the phototrapping and photofragmentation of microplastics. During light irradiation and subsequent photocatalysis, the surface morphology of microrobots transformed into porous flower-like networks that trap microplastics for subsequent degradation. This reconfigurable microrobotic technology represents a significant step forward in the efforts to degrade microplastics.

Effects of Wastewater Treatment Processes on the Removal Efficiency of Microplastics Based on Meta-analysis

Microplastics (MPs) are ubiquitous emerging pollutants that have been found in the marine, freshwater, air, and soil environments. Wastewater treatment plants (WWTPs) play an important role in releasing MPs to the environment. Therefore, understanding the occurrence, fate, and removal mechanism of MPs in WWTPs is of great importance towards microplastic control. In this review, the occurrence characteristics and removal rates of MPs in 78 WWTPs from 57 studies were discussed based on Meta-analysis. Specifically, the key aspects regarding MPs removal in WWTPs, such as wastewater treatment processes and MPs shapes, sizes, and polymer compositions were analyzed and compared. The results showed that:① the abundances of MPs in the influent and effluent were 1.56×10-2-3.14×104 n·L-1 and 1.70×10-3-3.09×102 n·L-1, respectively. The abundance of MPs in the sludge ranged from 1.80×10-1 to 9.38×103 n·g-1. ② The total removal rate (>90%) of MPs by WWTPs using oxidation ditch, biofilm, and conventional activated sludge treatment processes was higher than that using sequencing batch activated sludge, anaerobic-anoxic-aerobic, and anoxic-aerobic processes. ③ The removal rate of MPs in primary, secondary, and tertiary treatment process were 62.87%, 55.78%, and 58.45%, respectively. The combination process of "grid+ sedimentation tank+primary sedimentation tank" had the highest removal rate towards MPs in primary treatment processes, and the membrane bioreactor had the highest one beyond other secondary treatment processes. Filtration was the best process in tertiary treatment. ④ The film, foam, and fragment MPs were easier to remove (>90%) than fiber and spherical (<90%) MPs by WWTPs. The MPs with particle size larger than 0.5 mm were easier to remove than those with particle size smaller than 0.5 mm. The removal efficiencies of polyethylene (PE), polyethylene terephthalate (PET), and polypropylene (PP) MPs were higher than 80%.

148 Development of a test Method to Determine Inhalation Exposure of Microplastic Particles when Reusable Disposable Masks in Place

Abstract Situation/broad aims The SARS-CoV-2 pandemic has swept the globe since late 2019 and has driven explosive growth in the use of masks that has arisen an emerging concern of inhaled microplastic particles (MPs) when reuse disposable masks. In this study, we proposed a new methodology to determine whether the inhaled particles of microplastics emitted from the disposable masks when reusable mask in place as source control. Methods All experiments were conducted using a head-form manikin with a constant inspiratory flow at a simulated chamber. One commercially available ASTM Level 1 face (or surgical) mask with three-layer material, namely polypropylene (outer and middle layers), and polyethylene (inner layer) was used as test specimen to characterize the inhalation exposure of MPs. Brand new and reusable masks with and without a hand rubbing were compared. Particle physical characterization and morphology were determined using fluorescent staining with Nile red dye and scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) as well. The multiple-path particle dosimetry model was utilized to calculate the particle deposition in the respiratory tracts of human adults for emitted MPs fallen within the micrometer size range. Outcomes of the work: In this study, we proposed a method that the incorporation of scanning electron microscopy and infrared spectroscopy into the current fluorescent staining method to enhance the detection of MPs for qualitative analysis, may be more predictive of fragment microplastics are sourced from the different layer of disposable mask with a hand rubbing when in use.

Seasonal pollution and surface characteristics of microplastics in surface water in the Wanzhou section of the Three Gorges Reservoir, China

The pollution of freshwater environments with microplastics (MPs) has attracted increasing attention owing to their threats to aquatic ecosystems and human health. Here, we sampled and analyzed MPs from mainstream, tributary, and backwater areas in the Wanzhou section of the Three Gorges Reservoir (TGR) in impoundment and flood periods. Microplastic pollution was the most severe in the backwater areas. The average abundance of MPs reached the highest value in the flood period (5.27±3.47×107 items km−2), which was 3–5 times that in the impoundment period. In the 0.3–5 mm size class, the 1–5 mm fraction was the most abundant, accounting for more than 81% in the flood period and 68% of the total MP particle abundance in the impoundment period in the mainstream and backwater areas. However, 0.3–1 mm MPs contributed more than 50% in the tributaries during the impoundment period. Polystyrene, polypropylene, and polyethylene MPs were detected in foam, fragment, sheet, and line-shaped MP particles. White, opaque, foamed polystyrene MPs contributed 32–81% to total MP particle abundance in the watershed. Microplastic particle surfaces showed signs of damage and oxidation, and ten different elements were found. Oxygen was clustered on the surface of foam and fragment MPs. Microplastic pollution was severe in the Wanzhou watershed. Especially in the backwater areas, oxidized MPs of variable shapes derived mainly from surface runoff in the flood period and sewage discharge in the impoundment period were abundant. The results of this study contribute to understanding seasonal pollution patterns and surface characteristics of MPs in the TGR and similar watersheds.

Microplastics in Marine Sediments in Eastern Guangdong in the South China Sea: Factors Influencing the Seasonal and Spatial Variations

Little is known about the comprehensive factors influencing temporal changes in microplastic abundance in marine ecosystems. We investigated seasonal variations in the microplastic distribution in marine sediments in multiple-used zones of Eastern Guangdong in the South China Sea. The top 10 cm sediments from 26 sites were collected by grab sampling in the spring, summer, and winter of 2021. Marine sediments had the lowest microplastic abundance in summer, significantly lower than in other seasons. The size of microplastics varied from 22.5 to 4363.3 µm but the 50–200 µm range was the most abundant. Transparent and fragmented microplastics were the most frequently observed composition. Microplastic abundance negatively correlated to distance to the coast. However, seaweed ecosystems impacted microplastic abundance by changing the microenvironment and/or direct contact and entrapment. Microplastic abundance is closely related to coastal mariculture and local residential and industrial activities. Polypropylene, polypropylene-polyethylene copolymer, polyethylene terephthalate, and polyethylene were the most frequently detected compositions, probably from packaging materials, textiles, and electronic/electrical/building industries. This work helps to understand the role of multiple-used zones and their influence on microplastic distributions in marine ecosystems. Appropriate management of the use and disposal of plastic waste on land was recommended to alleviate microplastic pollution in the marine environment.

Distribution characteristics of microplastics in soil of Loess Plateau in northwest China and their relationship with land use type

The widespread distribution of microplastics (MPs) in soil has aroused great concern. The land use type can affect the distribution characteristics of MPs, whereas the abundance of MPs in the Loess Plateau region and the influence of different land use types on it are unclear. This study checked into the distribution of MPs in the Loess Plateau region, studied the abundance of MPs in woodland, construction land, grassland and cultivated land, and analyzed the distribution characteristics of their shape, size, and color. The abundance of MPs in the Loess Plateau region reached 2982.34 items/kg, dominated by black, small size and fragment MPs. The order of average abundance of MPs was: cultivated land (3535 items/kg) > construction land (2809 items/kg) > woodland (2781 items/kg) > grassland (2658 items/kg). Fragment MPs were predominant in woodland, construction land and cultivated land, but film and fiber MPs were predominant in grassland. MPs in cultivated land and construction land mainly sourced from human activities, MPs in woodland and grassland were more likely to come from atmospheric deposition. Human activities and sunlight exposure can cause MPs to break down, while trees in woodland block rays of light, slowing MPs breakage to some extent. And the polymer type of MPs was mostly PE and the main ones were black. This study may provide important data for follow-up research on MPs in terrestrial ecosystems.

Abundance and Characteristics of Microplastics in the Soil of a Higher Education Institution in China

While microplastics have been detected in various spheres of the environment, there are few studies examining their abundance in higher education institutions, where their exposure to students and staff could raise concern. This study aims to quantify and characterise the microplastics in the soil of a higher education institution in China. Surface soil samples were collected in triplicate from nine sampling sites distributed evenly across teaching, recreational, and residential areas on campus. The soil samples were sieved with a 5 mm screen, and the fractions passing through the sieve were digested with 30% hydrogen peroxide. Microplastics were density-separated from the digested soil and observed under the microscope. ATR-FTIR was used to determine their compositions. This study reveals a higher abundance of microplastics in teaching and residential areas (150–700 items/kg and 50–650 items/kg, respectively) as compared to recreational areas (0–450 items/kg), with the highest mean abundance (516.7 items/kg) recorded for residential areas. Fibrous and fragment microplastics (31.5% and 33.3%, respectively) were most common in the soil samples, with the former more prevalent in residential areas. There were more black microplastics (36.4%) and white microplastics (29.1%) than those of other colors. Microplastics £ 0.5 mm constituted the largest fraction (64.3%) of total microplastics recovered and polyethylene microplastics were most abundant (35.2%). This study contributes to a better understanding of microplastic pollution in the compounds of higher education institutions, which could be positively linked to the human activities within those institutions.

A mass budget and box model of global plastics cycling, degradation and dispersal in the land-ocean-atmosphere system

Since 1950 humans have introduced 8300 teragrams (Tg, 1012 g, millions of metric tons) of plastic polymers into the Earth’s surface environment. Accounting for the dispersal and fate of produced plastics and fragmented microplastics in the environment has been challenging. Recent studies have fueled debate on the global river budget for plastic transport to oceans, the sinking and beaching of marine plastics and the emission and deposition of atmospheric microplastics. Here we define a global plastics cycle and budget, and develop a box model of plastics cycling, including the fragmentation and transport of large and small microplastics (LMP, SMP) within coupled terrestrial, oceanic and atmospheric reservoirs. We force the model with historical plastics production and waste data, and explore how macroplastics, LMP and SMP propagate through the reservoirs from 1950 to 2015 and beyond. We find that considerable amounts of plastics reside most likely in the deep ocean (82 Tg), in shelf sediments (116 Tg), on beaches (1.8 Tg) and, as a result of marine emissions, in the remote terrestrial surface pool (28 Tg). Business as usual or maximum feasible reduction and discard scenarios show similar, 4-fold increases in atmospheric and aquatic ecosystem SMP exposure by 2050, because future plastics mobilization is controlled by releases from the large terrestrial discarded plastics reservoir (3500 Tg). Zero-release from 2025 onwards illustrates recovery of P and LMP reservoirs on centennial time scales, while SMP continue to cycle in air, soil, and surface ocean for millennia. Limiting dramatic future dispersal of plastics requires, in addition to reducing use and waste, remediation of the large terrestrial legacy plastics pool.

Exudation of microplastics from commonly used face masks in COVID-19 pandemic.

The COVID-19 pandemic forced use of face masks up to billions of masks per day globally. Though an important and necessary measure for control of the pandemic, use of masks also poses some inherent risks. One of those risks is inhalation of microplastics released from the mask materials. Since most of the mask materials are made from plastic/polymers, they always have the potential to expose the user to fragmented microplastics. To estimate the amount of inhalable microplastic exuded from masks, an experiment simulating real-life scenario of mask usage was performed. The study included collection of microplastics oozed out from the masks on to a filter paper followed by staining and fluorescence detection of the total number of microplastics using a microscope. Both used and new masks were studied. Based on the emission wavelength, the microplastics were found to be belonging to three different categories, namely blue, green and red emitting microplastics respectively. The number of microplastic particles emitted per mask over a period of usage of 8h was about 5000 to 9000 for new masks and about 6500 to 15,000 for used masks respectively. The estimation of polymer type of plastic in the mask fabrics was also carried out using Raman and FTIR spectroscopy.

Masses and size distributions of mechanically fragmented microplastics from LDPE and EPS under simulated landfill conditions

Landfills contain significant amounts of plastic waste (PW) and microplastics (MPs). However, the contributions of various PW fragmentation processes to the quality and quantity of MPs in landfills are unclear. In this study, LDPE and EPS pieces were mixed with sand to simulate landfilled solid waste, which experienced one-dimensional abiotic compression under vertical stress of 100–800 kPa for 1–300 days. The generated MPs were stained and quantified with a fluorescent microscope. The numbers and masses of the fragmented MPs increase with the increasing compression stress and duration following linear or exponential trends. EPS has a lower stiffness than LDPE, thus generates more MPs under the same compression conditions. Stress-dependent and time-dependent fragmentation mechanisms are distinguished, the former is driven by sand-plastic porosity reduction and the latter is due to microscopic interfacial creep with minimal porosity reduction. Most of the mechanically fragmented MPs have diameters < 100 µm. The MPs size distributions follow an established power-law model, which are dependent on stress, duration, porosity reduction, and fragmentation mechanism. Our results serve as conservative estimations on long-term MPs generation in real landfills, which provide confirmative and quantitative evidence to support the previous studies reporting the varied MPs abundances and properties within landfills.

Microplastics in the Surface Sediment of the main Red River Estuary

Microplastics (&lt; 5mm) are one emerging pollutant in the environment. These are the threats and challenges facing the global environment, economy, and society, especially in hotspot regions such as Asia. This paper presents the microplastic characteristics found in the surface sediment of the main Red River estuary (the Ba Lat) during four separate monitoring runs in 2020. The microplastic amount in the sediment samples varied from 800 items per kg of dried weight (dw) to 3,817 items.kg-1 dw, averaging 2,188 ± 1,499 items.kg-1 dw. Fiber and fragment microplastics were discovered to be primary shapes, of which fibers dominated (94%). Microplastic fiber sizes were found mainly in the &lt; 500 µm (69%) range. The most primarily observed colors of microplastics were blue (36%), white (21%), and red (11%). There were five recognized polymer types (polypropylene (PP), polyethylene (PE), polyurethane (PU), polyamide (PA), and polystyrene (PS)) in the sediment samples, with PE and PP predominating. Seasonal fluctuations in microplastic concentrations at the Ba Lat site, a significant aquaculture zone, may indicate the contribution of multiple sources. Our research demonstrated the necessity of microplastic observation in organisms, particularly in the aquaculture zones in Vietnam. Our findings further underline the importance of managing and minimizing the amount of plastic garbage that enters the ecosystem.

Small-sized microplastics (< 500 μm) in roadside soils of Beijing, China: Accumulation, stability, and human exposure risk

The potential threats of microplastics (MPs) to human health in urban environment have received increasing attention. Small MPs substantially threaten soil organisms and human beings because they are easily ingested and may adsorb other pollutants to form composite compounds. However, roadside soils as a source and a sink of small MPs in urban environments have not been reported. Here, we studied the small-sized MPs (SMPs, < 500 μm) pollution and human exposure analysis by investigating the MPs in roadside soils in Beijing. SMPs contributed to 88.06% of the high average MPs abundance (22001.67 ± 24482.34 items/kg), and were categorized as uncontaminated to moderately contaminated, assessed by the geo-accumulation index (Igeo). SMPs mainly consisted of polypropylene (PP) and polyethylene (PE) with morphotypes of fragment and granule. In particular, highly stable and fragmented MPs were discovered by the conditional fragmentation model. And normal-sized MPs (NMPs 500–5000 μm) NMPs could further fragment into SMPs, indicating that SMPs in roadside soil were further enriched. The estimated infant exposure to SMPs was greater than that in adults, and independent of the polymer types and morphotypes. PP is currently the main pollutant, contributing 65% to the estimated human exposure. Combining the conditional fragmentation model and main polymer types, SMPs likely derived from containers/packaging and fertilizers, and affected by atmospheric transport. This study demonstrated the dominance and potential risk of SMPs in roadside soil, suggesting that health risk assessment for SMPs in urban environment necessitates critical investigation.