Pelvic Fractures Research Articles

Association of thromboelastogram hypercoagulability with postoperative deep venous thrombosis of the lower extremity in patients with femur and pelvic fractures: a cohort study

BackgroundThe relationship between thromboelastogram (TEG) hypercoagulation status and perioperative deep vein thrombosis (DVT) in patients with femoral and pelvic fractures is not well understood. We aimed to investigate the relationship between hypercoagulation status identified by thromboelastography and postoperative DVT formation in patients with femoral and pelvic fractures, as well as to evaluate the role of thromboelastography in assessing hypercoagulation status and predicting postoperative DVT formation.MethodsData from 2,065 patients with femoral and pelvic fractures who underwent surgical treatment at a hospital in China between May 2018 and December 2023 were retrospectively analysed. Hypercoagulable TEG was defined as reaction time (R) < 5 min, coagulation time (K) < 1 min, alpha angle (α) > 72 degrees, maximum amplitude (MA) > 70 mm, and/or coagulation index (CI) > 3. The correlation between preoperative hypercoagulability identified by TEG and postoperative DVT formation was assessed using multivariate logistic regression. Propensity score matching (PSM) was performed to control for confounding factors.ResultsCompared to the non-DVT group, the DVT group had decreased R and K values, while the α, MA, and CI values significantly increased (P < 0.05). Multivariate logistic regression analysis demonstrated that hypercoagulable TEG findings were predictive of postoperative DVT formation. PSM, using a 0.1 calliper value, matched 296 patients from the hypercoagulation and non-hypercoagulation groups in a 1:1 ratio. Before PSM, hypercoagulable TEG was associated with DVT in femoral and pelvic fractures (P < 0.001, odds ratio [OR]:1.860, 95% confidence interval: 1.389–2.492). After PSM, these two variables remained correlated (P = 0.001, OR = 1.878, 95% confidence interval:1.301 − 2.709).ConclusionsThe hypercoagulable state identified by TEG can predict thromboembolic events in patients with femoral and pelvic fractures.Trial registrationThe study was registered in the Chinese Clinical Trial Register (https://www.chictr.org.cn/bin/home) on April 16, 2024, with registration number ChiCTR2400083135.

Causal association between cholecystectomy and fracture: A Mendelian randomization study.

Previous observational studies have reported that cholecystectomy is associated with an increased risk of fracture. However, the causality of this association remains unclear. This study aimed to explore the causal relationship between cholecystectomy and fracture using a Mendelian randomization (MR) approach. Our primary analytical method was the comprehensive two-sample MR analysis, with inverse variable weighting (IVW) serving as the main analysis technique. In addition, we use Bayesian weighted MR analysis to further confirm the results of IVW method. To enhance the robustness of our findings, we employed multiple analytical approaches including MR-Egger, weighted mode, simple mode, and weighted median. We further conducted sensitivity analyses to validate the stability and feasibility of our dataset. The results of IVW methods showed that there had no significant causal effect of cholecystectomy on fracture (forward P value: .82, .63, .96, .60, .19, .40, .58, .38, .37, .97, and .50 for fracture of wrist and hand, fracture of femur, fracture of foot, fracture of forearm, fracture of lower leg, fracture of lumbar spine and pelvis, fracture of neck, fracture of ribs, fracture of shoulder and upper arm, fracture of skull and facial bones, and fracture of spine), the results of Bayesian weighted MR showed similar results (P > .05). In the reverse, fracture of femur (P = .01) and fracture of shoulder and upper arm (P = .01) showed increased risks of cholecystectomy. The sensitivity analysis showed that none of our analyses were horizontally pleiotropic (P > .05 for MR-Egger's intercept method). Our results do not support the causal effect of cholecystectomy on fracture, which was opposite to most previous observational studies.

Are all cases of floating hip the same? Further understanding of floating hip

PurposeFloating hip is a severe high-energy injury. Femoral fracture is an essential component of floating hip. However, few studies have addressed the relationship between the femoral fracture pattern and floating hip injury. In this study, we reviewed and summarized the epidemiological and clinical data of patients with floating hip.Patients and methodsWe retrospectively reviewed patients with a diagnosis of floating hip at our trauma center from January 2014 to December 2021. Data on patient demographics, characteristics of the injuries, associated injuries, whether sciatic nerve palsy (SNP) occurred, the number of operations performed, and the total length of hospital stay were analyzed.ResultsA total of 76 patients met the diagnostic criteria for floating hip, 45 of whom had proximal femoral fractures. The mean Injury Severity Scores in patients with proximal and non-proximal femoral fractures were 21.47 ± 10.67 and 17.61 ± 7.64, respectively, and the mean Abbreviated Injury Scale scores were 13.31 ± 9.71 and 9.52 ± 4.32, respectively. Motor vehicle collision and a fall from a height were the main causes of injury. Chest injury was the most common associated injury. Twenty-two patients were diagnosed with SNP, 17 of whom had a proximal femoral fracture. Of the patients with pelvic fractures, 15 were diagnosed with SNP, 14 of whom also had a proximal femoral fracture. Of the patients with acetabular fractures, seven were diagnosed with SNP, three of whom also had a proximal femoral fracture.ConclusionMore than half of patients with floating hips have a combined proximal femoral fracture. In this study, fracture of the pelvis or acetabulum combined with a proximal femoral fracture had a higher AIS score and higher risk of SNP than fracture of the pelvis or acetabulum combined with a non-proximal femoral fracture. Patients with a single pelvic fracture showed similar results, but patients with a single acetabular fracture did not. A pelvic or acetabular fracture combined with a proximal femoral fracture has a different outcome than a mid-distal femoral fracture, which may be a “true” floating hip.

Dynamic changes in bleeding sites: Evaluating contrast extravasation on computed tomography and angiography in pelvic fractures.

Contrast extravasation ("blush") on contrast-enhanced computed tomography (CECT) indicates active bleeding, but diagnostic angiography (AG) following CECT sometimes differs from the CECT findings in patients with pelvic fractures. This study aimed to evaluate the concordance rate between blush on CECT and AG based on pelvic anatomical location. This retrospective single-center study included patients (18 years or older) with pelvic fractures between 2015 and 2023 who had AG after CECT. Angiography was performed in patients with blush or hematoma on CECT, or unstable hemodynamics due to pelvic fracture. Pelvic bleeding regions were categorized separately into left and right as anterior internal iliac artery and posterior internal iliac artery based on pelvic arterial anatomy. The concordance rate between blush on CECT and AG was assessed using the k statistic. A total of 87 patients with pelvic fractures were included. Among these, 75 (86%) had blush on CECT, and 12 (14%) had no blush on CECT. The concordance rate was 83% (95% confidence interval, 0.03-0.57; k = 0.30) when assessed on an individual patient basis and 53% (95% confidence interval, 0.24-0.44; k = 0.34) when evaluated by anatomical regions on a unilateral half of the pelvis. The concordance rate for the anatomical hemipelvis evaluation was significantly lower compared with the individual evaluation (p < 0.001). Thirty-three percent of patients with unilateral blush on CECT showed new contralateral blushes during AG. The location of active bleeding often differs between CECT and AG, indicating that bleeding may change intermittently and at various sites over time. This suggests the importance of evaluating both sides of the pelvic arteries during AG rather than solely relying on CECT findings. Prognostic and Epidemiological; Level IV.

Enhancing clinical decision-making in closed pelvic fractures with machine learning models.

Closed pelvic fractures can lead to severe complications, including hemodynamic instability (HI) and mortality. Accurate prediction of these risks is crucial for effective clinical management. This study aimed to utilize various machine learning (ML) algorithms to predict HI and death in patients with closed pelvic fractures and identify relevant risk factors. The retrospective study included 208 patients diagnosed with pelvic fractures and admitted to Suning Traditional Chinese Medicine Hospital between 2019 and 2023. Among these, 133 cases were identified as closed PFs. Patients with closed fractures were divided into a training set (n = 115) and a test set (n = 18). The training set was further stratified into two groups based on hemodynamic stability: Group A (patients with HI) and Group B (patients with hemodynamic stability). A total of 40 clinical variables were collected, and multiple machine learning algorithms were employed to develop predictive models, including logistic regression (LR), C5.0 Decision Tree (DT), Naive Bayes (NB), support vector machine (SVM), K-nearest neighbors (KNN), random Forest (RF), and artificial neural network (ANN). Additionally, factor analysis was performed to assess the interrelationships between variables. The RF and LR algorithms outperformed traditional methods-such as central venous pressure (CVP) and intra-abdominal pressure (IAP) measurements-in predicting HI. The RF model achieved an average under the ROC (AUC) of 0.92, with an accuracy of 0.86, precision of 0.81, and an F1 score of 0.87. The LR model had an average AUC of 0.82 but shared the same accuracy, precision, and F1 score as the RF model. Key risk factors identified included TILE grade, heart rate (HR), creatinine (CR), white blood cell count (WBC), fibrinogen (FIB), and lactic acid (LAC), with LAC levels >3.7 and an injury severity score (ISS) >13 as significant predictors of HI and mortality. In conclusion, the RF and LR algorithms are effective in predicting HI and mortality risk in patients with closed PFs, enhancing clinical decision-making and improving patient outcomes.

Outcomes of bulbar artery sparing during anastomotic urethroplasty for pelvic fracture urethral injury

ObjectiveTo the present long-term outcomes of the vascular-sparing approach during reconstruction of pelvic fracture urethral injuries (PFUI) described by Gomez et al. Material and methodsAnastomotic reconstruction of PFUI is performed without transecting the bulb of the spongiosum, to preserve the antegrade flow of the bulbar arteries. After exposure of the urethra, the bulbar arteries are located using a Doppler stethoscope. The bulb is mobilized dorsally and unilaterally, sacrificing the artery with the weaker Doppler signal to preserve the best contralateral artery. Occasionally, both arteries can be preserved. Removal of all fibrosis and anastomosis is performed as described in the traditional transecting technique. ResultsA total of 60 patients were included, with a mean age of 37 years (IQR 22-48). The median time from trauma to urethral reconstruction was 16 weeks, and the mean stenosis length was 2.5 cm (IQR 2-3). The left bulbar artery was preserved in 27 cases, the right bulbar artery in 8, and both in 24. There were postoperative complications in 14 cases (23%), but only one of them was Clavien ≥ III. With a mean follow-up of 56 months (IQR 12-87), only one patient failed due to stenosis (98% success). ConclusionPreservation of antegrade arterial flow to the corpus spongiosum during PFUI reconstruction is feasible and safe. Although slightly more elaborate, this technique could reduce the risk of ischemic failure of reconstruction.

Comparison of the stability of dual INFIX and INFIX combined with sacroiliac screw fixation for C1 type pelvic fractures

To evaluate the biomechanical stability of dual anterior subcutaneous internal fixation (INFIX) in pelvic C1 fractures by finite element analysis, and to compare it with INFIX combined with sacroiliac screws to determine whether it is sufficient to replace the combined fixation of anterior and posterior rings. The pelvic CT data of a 43-year-old female volunteer were imported into the computer and the normal pelvic model and pelvic C1 fractures model were constructed using Mimics, Workbench and other software. The latter was fixed with dual INFIX and INFIX combined with sacroiliac screws, respectively. First, the effectiveness of the normal pelvic model in anatomical landmarks, stress conduction and displacement distribution was verified. Then, a vertical downward load of 500 N was applied to the two internal fixation models to simulate the standing and sitting positions of the human body, and the displacement of the anterior and posterior ring fractures ends, the stress of the internal fixation and the stress of the nail channel in the bone were collected. The model passed the validity verification. The maximum displacement of the anterior and posterior ring fractures in the standing dual INFIX group were 0.861 mm and 4.128 mm, respectively, which were both smaller than the 0.152 mm and 0.293 mm in the combined fixation group. The displacement of the posterior ring fractures in the sitting dual INFIX group was 3.757 mm, which was larger than the 0.560 mm in the combined fixation group, while the maximum displacement of the anterior ring fractures was 0.221 mm, which was not much different from the 0.194 mm in the combined fixation group. The maximum stress of internal fixation in the standing dual INFIX group was greater than that in the combined fixation group, while the opposite was true in the sitting position. The maximum stress of each internal fixation was lower than the yield strength of titanium alloy 790 MPa. The maximum stress of the nail channel in the standing and sitting daul INFIX groups was lower than that in the combined fixation group, and the stress of all nail channels was lower than the strength limit of bone 290 to 540 MPa. The stability of dual INFIX fixation in anterior and posterior ring fractures is generally inferior to that of INFIX combined with sacroiliac screw fixation. Although simple dual INFIX fixation can share part of the load for the posterior ring, the posterior ring will still have a large displacement, so the fixation of the posterior ring is very important. In addition, the fixation strength and stability of dual INFIX in the anterior ring are better than INFIX. When INFIX cannot provide sufficient strength to stabilize the anterior ring fractures, dual INFIX will be a good choice.

Acute treatment of elderly patients with acetabular fractures by open reduction, internal fixation, and total hip arthroplasty: a 1-10-year follow-up of 48 patients.

Acetabular fractures in osteoporotic bone are associated with substantial joint impaction and comminution, previously shown to be prognostic for a poor result. A combined procedure of open reduction, internal fixation (ORIF), and total hip arthroplasty (THA) can be a good option, allowing for immediate weightbearing as tolerated. We report short- to medium-term outcome and complications of the results of patients treated with this combined procedure. 48 cases treated with ORIF and acute THA from 2000 to 2019 were identified from our local pelvic fracture registry, from which follow-up data was extracted. Descriptive statistics were used and Kaplan-Meier survival curves were calculated. Primary outcome was HHS at 1 year. Secondary outcomes were implant survival, complications requiring surgery, and mortality at 3 months. There were 37 men and 11 women treated in the study period. Mean age was 68 (37-87) years. 6 patients died within 3 months of surgery, leaving 42 cases available for follow-up. Mean follow-up (FU) was 2.8 (1-16) years. The most common mechanism of injury was fall from standing height (n = 36). Medical comorbidities were common. Mean Harris Hip Score (HHS) was 83 (51-100) at 1-year follow-up. There were 7 reoperations: 6 for postoperative infection and 1 closed reduction of implant dislocation. 38 had their implant intact at latest FU. At the latest FU, 28 patients were ambulatory without a walking aid. Our results indicate that ORIF and acute THA can be performed with good functional results in patients with unreconstructable displaced acetabular fractures, but with a significant risk of infection and revision.

Modified screw-rod fixation for management of posterior pelvic ring fractures: a retrospective study

BackgroundPelvic fractures are often associated with life-threatening damage and mechanical instability. Surgical therapy is a prior choice. To minimize surgical invasion and risk, bilateral screws combined with curved rod were applied to stabilize posterior pelvic ring. This study was aim to explore the clinical effect of this procedure.MethodsFrom January 2018 to January 2022, 27 patients with posterior pelvic fracture were included retrospectively. There were 12 males and 15 females with an average age of 56.3 ± 14.2 years. The prognosis of pelvis was evaluated by Matta and Majeed scores. Relevant clinical evaluation indications include the time of fracture healing, limb function and complications.ResultsThe average follow-up time was 14.2 ± 5.4 month. Matta scoring standard: excellent in 18 cases, good in 7 cases, the good rate was 92.6%. The average healing time was 8.4 months. The standard of Majeed score in 6 months after operation: excellent in 14 cases, good in 10 cases, the good rate was 88.8%. At the last follow-up, the functional recovery of the affected limb was satisfactory. No deep infection occurred after operation. The neurological symptoms of patients with caudal sacral nerve injury were recovered 6 months after operation.ConclusionThe results indicated that screw-rod system is a safe technique. Minimally invasive technology reduced frequency of fluoroscopy. It provides a simple and safety method for posterior pelvic fracture.

New Minimally Invasive Method for Treating Posterior Pelvic Ring Fractures: Biomechanical Validation and Clinical Application of Sacroiliac Joint Locking Plate.

Considering the high incidence and complexity of unstable posterior pelvic ring fractures, and the need for less invasive and more effective treatment options, this study aims to introduce a novel minimally invasive, safe, and simple internal fixation method for the treatment of unstable posterior pelvic ring fractures using the sacroiliac joint locking plate (SJP) system, and to provide biomechanical validation and clinical evaluation of this method. Biomechanical research was conducted using standard pelvic bone models from Synbone, Switzerland, to create Denis II zone unstable posterior pelvic ring fracture models, and to assess the stability of the SJP under different loads compared with traditional fixation methods. A retrospective clinical study analyzed the clinical efficacy of SJP treatment in 62 patients (mean age of 51.7 ± 11.9 years and male-to-female ratio of 42/20) treated at our hospital from October 2016 to January 2023. Biomechanical tests showed that at a maximum load of 300 N, the displacement values for the SJP (3.361 ± 0.246 mm) and two iliosacral (IS) screws (3.325 ± 0.335 mm) were significantly lower than those for a single IS screw (4.281 ± 0.399 mm) and tension band plate (TBP) (4.678 ± 0.534 mm). In the stiffness test of the compression-separation experiment, the average stiffness of the SJP (92.09 ± 1.17 N/mm) was higher than that of a single IS screw (80.06 ± 2.57 N/mm) and TBP (71.67 ± 1.12 N/mm) (p < 0.05 for both), but lower than that of two IS screws (104.94 ± 1.16 N/mm) (p < 0.05). Clinically, postoperative pain scores decreased to 1.9 ± 0.9 after SJP surgery, which was a significant reduction compared with the preoperative score of 9.1 ± 1.1. Functional prognosis scores improved from 36.1 ± 11.5 preoperatively to 88.4 ± 14.2, showing a marked improvement. The postoperative Majeed scores for the patients were 87.4 ± 8.1, and the incidence of complications was low, with only one case reported so far. The SJP demonstrates robust stability in biomechanical experiments, making it highly advantageous for clinical applications and widespread adoption. It offers several benefits, including straightforward surgical operation, minimal risk of vascular and neural injury, low surgical requirements, and eliminates the need for fluoroscopy. These advantages contribute to its remarkable clinical efficacy and potential for extensive utilization.

Prevention and treatment of glucocorticoid-induced osteoporosis in adults: recommendations from the European Calcified Tissue Society.

This report presents the recommendations of the European Calcified Tissue Society (ECTS) for the prevention and treatment of glucocorticoid-induced osteoporosis (GIOP) in adults. Our starting point was that the recommendations be evidence based, focused on non-bone specialists who treat patients with glucocorticoid (GC) and broadly supported by ECTS. The recommendations were developed by global experts. After a comprehensive review of the literature, 25 recommendations were formulated, based on quality evidence. For stratifying fracture risk and the most appropriate first line of treatment, we have classified patients into 3 categories: those at medium risk of fractures, ie, adults without a recent (in the last 2 years) history of fracture; those at high risk of fractures, ie, adults with recent history of fracture, and/or at least one vertebral fracture (grade ≥ 2 according to Genant classification); and those at very high risk of fractures, ie, adults aged ≥70 years with a recent hip fracture, pelvis fracture, and/or at least one vertebral fracture (grade ≥ 2 according to Genant classification). The subtopics in the recommendations include who to assess, how to assess, who to treat, how to treat, and follow-up and monitoring. General measures are recommended for all patients who are being prescribed GCs for ≥3 months, ie, calcium and protein intake should be normalized, a 25(OH) vitamin D concentration of 50-125 nmol/L should be attained, and the risk of falls be minimized. (1) Who to assess? (R1-2) A preliminary assessment of fracture risk should be routinely performed in patients likely to receive oral GCs for ≥3 months: (i) women and men ≥ 50 years and (ii) patients at increased risk of fracture (history of fragility fracture and/or have comorbidities or are on medications that are frequently associated with osteoporosis. (2) How to assess (fracture risk)? (R3-6) Clinical risk factors include history of fragility fracture, systematic vertebral imaging, and GC dose-adjusted FRAX, measurement of bone mineral density (BMD) by dual-energy X-ray absorptiometry (DXA), fall risk, and biochemical testing. (3) Who to treat? (R7-12) Anti-osteoporosis treatment is indicated for women and men ≥ 50 years with (i) the presence of a recent history of vertebral and/or non-vertebral fracture (less than 2 years), (ii) and/or a GC dosage ≥ 7.5 mg/day, (iii) and/or age ≥ 70 years, (iv) and/or a T-score ≤ -1.5, (v) and/or 10-year probability risk above the country specific GC dose-adjusted FRAX® thresholds. In premenopausal women and men < 50 years with a Z-score ≤ -2 and/or a history of fragility fracture, it is recommended to refer the patient to a bone specialist. (4) How to treat? (R13-18) In women and men ≥ 50 years, (i) alendronate or risedronate is preferred as the first line of treatment in patients at medium risk of fractures, (ii) zoledronic acid or denosumab in patients at high risk of fractures, and (iii) teriparatide in patients at very high risk of fractures. It is imperative that sequential therapy be implemented in individuals receiving denosumab or teriparatide as their first-line treatment regimen. (5) Follow-up and monitoring (R19-25): in patients receiving anti-osteoporosis treatment, monitoring of clinical risk factors (eg, history of fragility fracture), systematic vertebral imaging, fall risk, BMD measurement using DXA, and biochemical testing should be performed regularly during follow-up. The new, evidence-based recommendations by the ECTS for the prevention and treatment of GIOP provide clear and pragmatic advice to all health practitioners especially those who are not bone specialists.

Percutaneous sacroiliac screw fixation with a 3D robot-assisted image-guided navigation system

Abstract Objective Presentation and description of percutaneous sacroiliac (SI) screw fixation with the use of a 3D robot-assisted image-guided navigation system and the clinical outcome of this technique. Indications Pelvic fractures involving the posterior pelvis. Contraindications Patients not suited for surgery. Surgical technique Planning the screws on the diagnostic computer tomogram (CT). Matching with a low-dose CT in the operating room. Lateral incision. Verify the guidewire position with the personalized inlet and outlet views. After correct positioning, place a cannulated screw over the guidewire. For fragility fractures, augmentation is recommended. Finish the surgery with a final 3D scan to confirm correct placement of the screws and cement. Postoperative management Direct postoperative mobilization with pain-adapted full weight-bearing. Results Data of 141 patients between January 2018 and August 2022 were analyzed (average age 82 ± 10 years, 89% female). Most of the fractures were type II fragility fractures of the pelvis (FFP; 75%). The median hospital stay was 12 ± 7 days and the median surgery duration for a unilateral SI screw was 26 min. In total 221 S1 screws and 17 S2 screws were applied. No screws showed signs of loosening or migration. Of the five suboptimally placed screws, one screw was removed due to sensory impairment. All patients with cement leakage remained without symptoms. Conclusion The surgical technique with the use of a 3D robot-assisted image-guided navigation system is a technique for safe fixation of dorsal fragility fractures of the pelvis and is associated with fewer complications.

Experimental study of fractures of the posterior pelvic ring C1.1 using LC-II screws and internal fixation by plate

IntroductionTo compare the biomechanical outcomes of C1.1 posterior pelvic ring fractures treated with different numbers of LC-II screws and plate internal fixation.Materials and methodsNine adult preserved pelvic specimens were used. After being measured by bone densitometry, the specimens were randomly divided into 3 groups of 3 pelvic specimens each. The C1.1 pelvic fractures were generated by iliac osteotomies and anterior pelvic ring osteotomies. The fractures were fixed and randomly divided into three groups: (1) one LC-II screw, (2) two LC-II screws, and (3) two reconstruction plates. The anterior pelvic rings were all fixed with pubic branch screws. A biomechanical testing machine loaded all specimens vertically, recording the displacement and ultimate load of the specimens to quantify the stiffness.ResultsWhen loads up to 1000 N were applied, the displacement of the iliac bone was close between the one LC-II screw and the two LC-II screw group specimens; (P > 0.05); when loads such as 1000 N, 1200 N and 1400 N were applied, there was no significant difference in displacement between the plate fixation group and the two LC-II screw fixation group (P > 0.05), both of which were superior to the one LC-II screw fixation group (P < 0.05). There was no significant difference in compressive stiffness between the two LC-II screw fixation groups and the plate fixation group (P > 0.05), and both were superior to the one LC-II screw fixation group (P < 0.05) the ultimate load of both the two LC-II screws and the steel plate is greater than that of one LC-II screw (1.74 times the ultimate load of one LC-II screw for the two LC-II screws and 1.83 times the ultimate load of one LC-II screw for the steel plate).ConclusionFor posterior pelvic ring fractures of type C1.1, placement of two LC-II screws provides comparable posterior pelvic ring stability compared to reconstructed plates. At loads below 1000 N, one LC-II screw fixation and two LC-II screws were comparable in restoring posterior pelvic ring stability.

Effectiveness of sacroiliac screw implantation assisted by three-dimensional printed faceted honeycomb guide plate in treatment of posterior pelvic ring fracture

To investigate the effectiveness of sacroiliac screw implantation assisted by three-dimensional (3D) printed faceted honeycomb guide plate in the treatment of posterior pelvic ring fracture. The clinical data of 40 patients with posterior pelvic ring fractures treated with sacroiliac screw implantation between December 2019 and December 2022 were retrospectively analyzed. Among them, 18 cases were treated with sacroiliac screws fixation assisted by 3D printed faceted honeycomb guide plate (guide plate group), and 22 cases were treated with sacroiliac screws percutaneously fixation under fluoroscopy (conventional group). There was no significant difference in baseline data ( P>0.05) such as gender, age, time from injury to operation, and Dennis classification between the two groups. The implantation time, frequency of C-arm X-ray fluoroscopy, frequency of guide pin adjustment of each sacroiliac screw, and postoperative complications and bone healing were recorded. Majeed score was used to evaluate the functional recovery at 6 months after operation, and CT was used to observe whether the screw penetrated the bone cortex. The deviation between the virtual position and the actual position of the screw tip, the sacral foramen, and the screw entry point was measured on the sagittal CT images of the guide plate group. The number of screws implanted in S 1 and S 2 vertebral bodies was 14 and 16 respectively in the guide plate group, and 17 and 18 respectively in the conventional group. The implantation time of each sacroiliac screw, the frequency of C-arm X-ray fluoroscopy, and the frequency of guide pin adjustment in S 1, S 2, and all vertebrae in the guide plate group were significantly less than those in the conventional group ( P<0.05). Patients in both groups were followed up 8-48 months, with an average of 19.7 months. There was no incision infection, screw displacement, or internal fixation loosening in both groups. Callus growth was observed in all patients at 12 weeks after operation, and bone healing was achieved in all patients. The healing time ranged from 12 to 24 weeks, with an average of 15.7 weeks. No sacroiliac screw penetrated the bone cortex in the guide plate group; 2 patients in the conventional group had sacroiliac screws penetrating the bone cortex without damaging blood vessels or nerves. In the guide plate group, the deviation between the virtual position and the actual position of the screw tip, the sacral foramen, and the screw entry point were (2.91±1.01), (2.10±0.74), and (1.67±0.70) mm, respectively, with an average deviation of (2.19±1.22) mm. There was no significant difference in Majeed function evaluation between the two groups at 6 months after operation ( P>0.05). The application of 3D printed faceted honeycomb guide plate in sacroiliac screw implantation for posterior pelvic ring fracture can shorten the screw implantation time, reduce the frequency of fluoroscopy and guide pin adjustment, and reduce the risk of screw penetration through the bone cortex.

The Italian version of the Majeed pelvic score: translation, cross-cultural adaptation and validation.

The assessment of functional outcomes after pelvic ring fracture remains a controversial topic. The Majeed pelvic score (MPS) is the most commonly used pelvic-specific questionnaire in the literature. The aim of this study is translation, cross-cultural adaptation and validation of the Italian version of MPS. The study was articulated in two phases. Phase 1 consisted in translation and cross-cultural adaptation of MPS, from English into Italian. The psychometric properties were tested on 52 Italian patients (Phase 2). Construct validity was assessed by correlation with Short-Form 12 (SF-12). 33 patients repeated the questionnaire after 14days to assess its reproducibility. All data were subsequently analyzed (descriptive statistics, multitrait analysis, reliability and construct validity assessment). The questionnaire was clear and easily understood (no missing data). A ceiling effect was detected for all items of the scale. Multitrait analysis showed good results for each outcome measure, except for the item "walking distance" that showed poor item discriminant validity. A significant correlation between the MPS and the physical component summary (PCS) of the SF-12 was found, while there was a weak correlation with the mental component summary (MCS). The questionnaire showed high internal consistency (Cronbach's alpha: 0.91-0.99) and very good test-retest reliability (intraclass correlation coefficients: 0.92-0.96). The Italian version of the MPS has demonstrated to be reliable and valid in the evaluation of patients with pelvic ring fractures. There is still however a need for an instrument capable of evaluating the mental component in these types of injuries.

Establishment and validation of a predictive model for lower extremity deep vein thrombosis in patients with traumatic pelvic fractures

BackgroundPatients with traumatic pelvic fracture (TPF) are at high risk for developing deep vein thrombosis (DVT). However, there is still no unified standard on how to distinguish high-risk groups for DVT in patients with TPF and how to accurately use anticoagulants at present.ObjectivesThis observational study aimed to establish a DVT risk nomogram score (DRNS) model for TPF patients, and to explore the value of the DRNS model as a clinical guideline in the prevention of DVT with low molecular weight heparin (LMWH).MethodsIndependent risk factors of lower extremity DVT were screened through Lasso regression and logistic regression. A DRNS model was established per this.ResultsThe independent risk factors of DVT included combined femoral fractures, age ≥ 40 years old, BMI (body mass index) ≥ 24 kg/m2, ISS score, fibrinogen concentration, and the minimum concentration of ionized calcium within 48 h after admission. The optimal cutoff value for DRNS was 78.5. In the low-risk population of DVT (DRNS < 78.5), there was no statistical significance of variation about the incidence of DVT progression between the LMWH once a day (qd) group and the LMWH once every 12 h (q12h) group, with P = 0.323. In the high-risk population of DVT (DRNS ≥ 78.5), the incidence of DVT progression in the LMWH qd group was significantly higher than that in the LMWH q12h group, with P = 0.002.ConclusionsThe DRNS model based on independent risk factors of DVT could stratify the risk of DVT for TPF patients, and it was able to provide more precise DVT drug prevention plans for clinicians.

Reliability of interobserver and intraobserver assessments of the Tile versus Young-Burgess classifications for pelvic ring injuries

Tile and Young-Burgess classification systems have been widely used to classify pelvic ring injuries in clinical settings; however, these two systems are rarely mentioned in the literature despite their reproducibility and practical application. The purpose of this study was to assess the interobserver and intraobserver reliability of the Tile and Young-Burgess classification of pelvic ring injuries. Eight hundred seven patients with pelvic fractures who presented to two I-level trauma centres between January 2016 and June 2020 were recruited for this study. The anteroposterior, inlet, and outlet of the pelvis were observed on radiographic images, and CT scans were performed on each patient. The anteroposterior, inlet, and outlet of the pelvis were radiographed at each visit, and CT scans were performed. Four observers were recruited to classify the injury type according to the Young-Burgess and Tile classification systems. Interobserver and intraobserver reliability (kappa coefficient, κ) were applied to assess the reproducibility of the two classification systems. A total of 174 patients (21.56%) could not be classified with the Young-Burgess classification, and all patients could be classified according to the Tile system. The mean κ value of the interobserver reliability was 0.558 (range, 0.444 to 0.653) for the Tile classification, indicating moderate agreement, whereas the mean κ value was 0.637 (range, 0.560 to 0.713), indicating substantial agreement, when the Young-Burgess classification was used. The mean κ value for intraobserver reliability was 0.597 (range, 0.567 to 0.653) for the Tile classification and 0.776 (range, 0.748 to 0.803) for the Young-Burgess classification. More pelvic ring injuries could be classified with the Tile classification than could be classified with the Young-Burgess classification. However, the reproducibility of the Young-Burgess classification was greater than that of the Tile classification.

Medical Textiles of Self-Inflating On Air Mattress Bed and Belt for Nursing Physical Therapy Education and Training Performing a Healing Process

Medical textiles of a self-inflating air mattress bed and belt include an air chamber and a foam panel therein. The air chamber is defined by top and bottom sheet panels and a valve allowing air passage into and out of the air chamber. The foam panel includes the field of airflow passage there through, and the top and bottom sheet panels are mechanically coupled directly together via the apertures in the foam panel of the air mattress conducted to improve sleep quality. This study investigated the effect of variations in the surface characteristics of mattress beds and belts on pelvic fracture patients’ sleep quality. The present study developed a mattress bed and belt whose rigidity can be varied by controlling the amount of air in its air cells. To investigate the effect of the variable rigidity of the air mattress bed and belt on pelvic fracture patients’ sleep quality, participants (women, ages 13-45) were instructed to sleep on the air mattress bed and belt under different conditions, and their sleep quality was subjectively and objectively investigated. Subjectively, sleep quality is assessed based on the participants’ evaluations of the depth and length of their sleep. Objectively, medical textiles for pelvic fracture patients and mattress bed and belt specifications are estimated using the sleep stage information obtained by analyzing the movements and brain waves of the participants during their sleep. A subjective assessment of the sleep quality demonstrates that the participants’ sleep was worse with the adjustment of the air mattress bed and belt.

Pregnancy and trauma: What you need to know.

Nearly 4% of pregnant patients have an injury-related visit to the emergency department during their pregnancy. There are important physiologic changes that occur during pregnancy that make managing pregnant trauma patients different from the standard management of a nonpregnant patient. This review discusses these changes and the initial assessment, laboratory, and imaging workups for the pregnant trauma patient. In addition, management of specific injuries in pregnancy including pelvic fractures, hemorrhagic shock, and postpartum hemorrhage are reviewed as well as key points regarding resuscitative hysterotomy and fetal support that trauma surgeons should be aware of. Original Research Article; Level II.

A Retrospective Study of Ballistic Pelvic Fractures With Focus on Short-Term Clinical Outcomes.

To evaluate the orthopaedic management, associated injuries, and outcomes in patients treated for low-velocity ballistic pelvic fractures. Retrospective chart review. Single, urban, Level I trauma center. Patients 15 years or older treated for low-velocity ballistic pelvic (OTA/AO 61 and 62) fractures from May 2018 to August 2021. Primary study measures included pelvic fracture location, concomitant associated injuries, surgical interventions, and antibiotic treatment. Postinjury sequelae evaluated include infection, neurologic deficit, and need for orthopaedic removal of foreign body. Risk factors of postinjury sequelae were investigated. A total of 156 patients with ballistic pelvic fractures were included. The cohort consisted of 135 (86.5%) male patients with a mean age of 29.8 years. One hundred ten (70.5%) patients sustained 2 or more gunshot wounds. Ninety-eight (62.8%) patients underwent an exploratory laparotomy with 79 (50.6%) having a confirmed concomitant intestinal injury. Additional associated injuries included nerve injury (13.5%), vascular injury requiring repair or embolization (10.9%), and bladder injury (10.3%). Nine (5.7%) patients underwent orthopaedic operative management-five (3.2%) patients for operative fixation and 4 (2.5%) patients for removal of intra-articular foreign bodies. Diabetes (odds ratio [OR]: 33.1, P = 0.025), neurologic deficit on presentation (OR: 525.2, P < 0.001), vascular injury requiring repair or embolization (OR: 8.7, P = 0.033), and orthopaedic pelvic fixation (OR: 163.5, P = 0.004) were positively associated with the defined postinjury sequelae at 30 and 90 days of follow-up. There was not a statistically significant association between infection and retained foreign body (OR: 3.95 [95% CI 0.3-58.7, P = 0.318]) or bowel contamination (OR: 6.91 [95% CI 0.4-58.7, P = 0.178]). Ballistic fractures of the pelvis and acetabulum rarely required operative fixation (3.2%) or irrigation and debridement. Neither retained foreign body nor presumed bowel contamination of pelvic fractures had a statistically significant association with infection, which further supports conservative management of these injuries. Patients with diabetes, neurologic deficit on presentation, vascular injury necessitating intervention, and orthopaedic fixation of pelvic fracture are associated with increased risk of postinjury sequelae. Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.