Fourier Transform Infrared Spectra Research Articles

Effect of nanodiamonds surface deposition on hydrophilicity, bulk degradation and in-vitro cell adhesion of 3D-printed polycaprolactone scaffolds for bone tissue engineering

This study was designed to deposit nanodiamonds (NDs) on 3D-printed poly-ϵ-caprolactone (PCL) scaffolds and evaluate their effect on the surface topography, hydrophilicity, degradation, andin-vitrocell adhesion compared to untreated PCL scaffolds. The PCL scaffold specimens were 3D-printed by fused deposition modeling (FDM) technique with specific porosity parameters. The 3D-printed specimens' surfaces were modified by NDs deposition followed by oxygen plasma post-treatment using a plasma focus device and a non-thermal atmospheric plasma jet, respectively. Specimens were evaluated through morphological characterization by field emission scanning electron microscope (FESEM), microstructure characterization by Raman spectroscopy, chemical characterization by Fourier transform infrared (FTIR) spectroscopy, hydrophilicity degree by contact angle and water uptake measurements, andin-vitrodegradation measurements (n= 6). In addition,in-vitrobone marrow mesenchymal stem cells adhesion was evaluated quantitatively by confocal microscopy and qualitatively by FESEM at different time intervals after cell seeding (n= 6). The statistical significance level was set atp⩽ 0.05. The FESEM micrographs, the Raman, and FTIR spectra confirmed the successful surface deposition of NDs on scaffold specimens. The NDs treated specimens showed nano-scale features distributed homogeneously across the surface compared to the untreated ones. Also, the NDs treated specimens revealed a statistically significant smaller contact angle (17.45 ± 1.34 degrees), higher water uptake percentage after 24 h immersion in phosphate buffer saline (PBS) (21.56% ± 1.73), and higher degradation rate after six months of immersion in PBS (43.92 ± 0.77%). Moreover, enhanced cell adhesion at all different time intervals was observed in NDs treated specimens with higher nuclei area fraction percentage (69.87 ± 3.97%) compared to the untreated specimens (11.46 ± 1.34%). Surface deposition of NDs with oxygen-containing functional groups on 3D-printed PCL scaffolds increased their hydrophilicity and degradation rate with significant enhancement of thein-vitrocell adhesion compared to untreated PCL scaffolds.

Facile Synthesis of Novel Magnetic Janus Graphene Oxide for Efficient and Recyclable Demulsification of Crude Oil-in-Water Emulsion

Nanoparticles have been widely applied to treat emulsion-containing wastewater in the form of chemical demulsifiers, such as SiO2, Fe3O4, and graphene oxide (GO). Owing to their asymmetric structures and selective adsorption, Janus nanoparticles show greater application potential in many fields. In the present work, the novel magnetic Janus graphene oxide (MJGO) nanoparticle was successfully prepared by grafting magnetic Fe3O4 to the surface of the JGO, and its demulsifying ability to treat a crude oil-in-water emulsion was evaluated. The MJGO structure and its magnetic intensity were verified by Fourier-transform infrared spectra (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD), and magnetization saturation (MS) tests. Compared with GO and JGO, MJGO displayed the superior efficiency (>96%) to demulsify the crude oil-in-water emulsion, which can be attributed to the reduced electrostatic repulsion between MJGO and the emulsion droplets. Furthermore, the effects of pH and temperature on the demulsification performance of MJGO were also studied. Lastly, the recyclability of MJGO largely reduced the cost of demulsifiers in separating crude oil and water. The current research presents an efficient and recyclable demulsifier, which provides a new perspective for the structural design of nanomaterials and their application in the field of demulsification.

Evaluation of the mechanical properties and chemical components of naturally aged glued laminated bamboo

This study experimentally investigated the mechanical properties of aged GLB. The material under investigation was obtained from an outdoor-exposed GLB frame that had been subjected to outdoor exposure for a period of ten years. In-depth discussions were conducted on the mechanical properties and failure modes of the material in tension, compression, and bending. The failure modes were identified as fiber fracture under tension, fiber buckling accompanied by delamination in compression, and a combination of tension failure and transverse shear failure in bending. In comparison to new materials, the tensile strength, compressive strength, and bending strength of aged GLB exhibited a reduction of 5.19% to 41.2%, 11.5% to 26.9%, and 6.6% to 40.1%, respectively. The reduction in strength exhibited considerable variability across the various positions within the aged GLB component cross-section. The greatest reduction in strength was observed in materials located on the upper surface of the component, which were directly subjected to UV radiation and rainwater erosion. Furthermore, Fourier transform infrared (FT-IR) spectroscopy analysis was conducted. The FT-IR spectra demonstrate that the chemical components of bamboo, including cellulose, hemicellulose and lignin, have experienced severe degradation.

Bimetallic nanoparticles with sulfated galactan eliminate Vibrio parahaemolyticus in shrimp Penaeus vannamei

Bimetallic (Au/Ag) nanoparticles (BNPs) have shown enhanced antibacterial activity compared to their monometallic counterparts. Sulfated galactans (SG) are a naturally occurring polymer commonly found in red seaweed Gracilaria fisheri. They are biocompatible and biodegradable and environmentally friendly. In this study, we utilized SG in combination with BNPs to develop composite materials that potentially enhance antibacterial activity against shrimp pathogens Vibrio parahaemolyticus and Vibrio harveyi, compared to BNPs or SG alone. BNPs were coated with sulfated galactan (SGBNPs) and characterized using UV–vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, zeta potential, and transmission electron microscopy (TEM). UV–vis spectroscopy analysis revealed that the surface plasmon peaks of BNPs and SGBNPs appeared at 530 nm and 532 nm, respectively. Zeta potential measurements showed that SGBNPs had a negative charge of −32.4 mV, while the BNPs solution had a positive charge of 38.7 mV. TEM images demonstrated the spherical morphology of both BNPs and SGBNPs with narrow size distributions (3–10 nm). Analysis of the FTIR spectra indicated that SG maintained its backbone structure in SGBNPs, but some functional groups were altered. Notably, SGBNPs showed superior antimicrobial and antibiofilm activities against V. parahaemolyticus and V. harveyi compared to SG and BNPs. Furthermore, treatment with SGBNPs significantly down-regulated the expression of virulence-related genes (toxR, cpsQ, and mfpA) for V. parahaemolyticus 3HP compared to the respective control, bacteria treated with BNPs or SG. Diets supplemented with SGBNPs, BNPs, or SG showed no detrimental impact on the growth of shrimp Penaeus vannamei. Shrimp fed with SGBNPs-supplemented feed showed significantly higher survival rates than those fed with BNPs-supplemented feed when infected with 3HP after being on the supplemented feed for seven days and a subsequent number of fifteen days. These findings collectively demonstrate the benefit of using SG capped Au–Ag BNPs as an antibacterial agent for the prevention and control of Vibrio sp. Infection in shrimp while reducing the risk of environmental contamination.

Study of Microstructure, Morphology and Functional Groups of Titanium Dioxide (Tio2) Impregnated With Copper (Cu)

This research aims to determine the differences in the microstructure, morphology, and functional groups of TiO2 (P-25) after being impregnated with Cu. Cu-impregnated TiO2 samples are synthesized using the impregnation method with TiO2 (P-25) and copper sulfate as precursors. The microstructure and functional groups of TiO2 (P-25) and Cu-TiO2 were investigated using X-ray diffraction (XRD), scanning electron microscope-energy dispersive x-ray (SEM-EDX), and Fourier transform infrared (FTIR) analysis. The lattice parameters (a, b, and c) of the TiO2 sample were found to be a = b = 0.3778 nm, c = 0.9494 nm, and these values increased to a = b = 0.3779 nm, c = 0.9496 nm after the addition of Cu. The distance between the lattices of the TiO2 sample was measured at 0.3505 nm and increased to 0.3509 nm after Cu addition. The average crystallite size of the TiO2 sample was 33 nm, which increased to 43 nm after Cu impregnation. The strain value decreased from 2.76×10^(-3) to 1.82×10^(-3) after Cu addition. SEM results revealed that the morphology of the particles from the Cu-doped synthesis showed agglomeration. The success of Cu doping was confirmed by EDX mapping, which showed the presence of Ti, O, and Cu evenly distributed on the TiO2 surface. The FTIR spectrum indicated that TiO2 (P-25) and Cu-TiO2 particles had absorption peaks at similar wave numbers. However, in the absorption area of 1000 cm^-1 to 1250 cm^-1, new absorption bands affiliated with Cu-O bonds appeared in the Cu-TiO2 sample, resulting from TiO2 vibrations after Cu addition.

In-Vitro Study of the Binding of Atorvastatin with Adenine using Multi-Spectroscopic Approaches.

Atorvastatin-an oral lipid regulating drug is a competitive inhibitor of 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMG-CoA reductase), which is the rate determining enzyme for cholesterol synthesis. Adenine is a purine nucleobase that is found in deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) to generate genetic information. The binding mechanism of atorvastatin and adenine was studied for the first time utilizing various techniques, including UV-visible spectrophotometry, spectrofluorimetry, synchronous fluorescence spectroscopy (SF), Fourier transform infrared (FTIR), fluorescence resonance energy transfer (FRET), and metal ion complexation. The fluorescence spectra of the complex indicated that atorvastatin is bound to adenine via hydrophobic interaction through a spontaneous binding process, and the fluorescence quenching mechanism was found to be static quenching with a binding constant of 1.4893 × 104 Lmol-1 at 298 K. Various temperature settings were used to investigate thermodynamic characteristics, such as binding forces, binding constants, and the number of binding sites. The interaction parameters, including the standard enthalpy change (ΔHο) and standard entropy change (ΔSο) were calculated using Van't Hoff's equation to be 42.82 kJmol-1 and 208.9 Jmol-1K-1, respectively. The findings demonstrated that the adenine- atorvastatin binding was endothermic. Furthermore, the results of the experiments revealed that some metal ions (K+, Ca+2, Co+2, Cu+2, and Al+3) facilitate the binding interaction between atorvastatin and adenine. Slight changes are observed in the FTIR spectra of adenine, indicating the binding interaction between adenine and atorvastatin.

An investigation of the structural and optical properties of modified barium magnesium fluoroborate glasses with hafnium oxide (HfO2)

AbstractGlasses of nominal composition xHfO2–(35-x)B2O3–15MgF2–35BaO, where x ranged from 0 to 0.2 mol% were fabricated using a melt-quenching technique. Structural characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and Raman spectroscopy, were employed to elucidate the glass network structure. The XRD patterns confirmed the amorphous nature of the studied glasses, while the FTIR and Raman spectra revealed that the incorporation of HfO2 may led to a transformation of trigonal BO3 units to tetrahedral BO4 units in the borate glass network. Deconvolution analysis of the FTIR and Raman bands provided quantitative insights into the extent of this structural rearrangement as a function of HfO2 content. UV–Vis absorption studies demonstrated that the optical bandgap of the glasses was widened with increasing HfO2 additions. This blue shift in the absorption edge was attributed to the increased formation of bridging oxygen bonds and reduced non-bridging oxygen content in the glass network. The results indicate that the studied glasses exhibit excellent compositional tunability through the incorporation of HfO2. The structural modifications and concomitant optical property enhancements suggest the potential of this glass system for various integrated photonic applications where low phonon energy and tailored transparency are highly desirable. The present work introduces a comprehensive investigation of the structural and optical property modifications in barium magnesium fluoroborate glasses induced by the addition of hafnium oxide (HfO2).

Poly(butylene adipate-co-terephthalate)/thermoplastic canna starch (Canna edulis ker.) (PBAT/TPS) blend film – A novel biodegradable material

The PBAT (poly (butylene adipate-co-terephthalate) is a promising biodegradable material. However, it is often blend with hydrophilic polymers since its degradation rate in the aquatic environment is still limited. In this study, the blend PBAT/TPS (thermoplastic starch) films, namely BFs, were prepared by a blow extrusion approach, and evaluated for hydrolysis in four studied mediums acid (HCl, 1 M, 2 M, and 3 M), alkaline (NaOH, pH = 9, 11, and 13), phosphate buffer (pH = 7.4), and artificial seawater. The hydrolyzed BFs were characterized by weight loss, mechanical properties, scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR), and differential scanning calorimetry (DSC). A larger starch content in the BFs caused hydrolysis more quickly. The highest hydrolytic rate was found in the alkaline solution, followed by the acid medium. The complete abiotic hydrolysis of the BFs was 3 M HCl for 14 days or NaOH (pH 13) for 35 days. After 180 days of incubation, the film containing 70.5 % PBAT/TPS granules has been associated with the highest biodegradation rate of 76.31 % in composting.

Characterizing eco-composite boards with non-woven polypropylene from disposable face masks and bamboo reinforcement

This study investigates the development of eco-composite panels using treated and untreated nonwoven polypropylene (PP) extracted from disposable medical face masks, reinforced with bamboo particles. Treated PP underwent a washing process with detergent. Panels were fabricated with varying PP-to-bamboo particle ratios of 100:0, 75:25, and 50:50. Fourier-transform infrared (FT-IR) spectroscopy analysis indicated minimal impact of washing on the intrinsic properties of the PP material, as confirmed by thermogravimetric analysis (TGA). Both analyses showed similar intensities of functional groups and thermal trends in treated and untreated recycled PP (rPP) samples. Energy-dispersive X-ray spectroscopy (EDX) confirmed the uniform integration of bamboo particles within the PP matrix by detecting silicon and potassium elements. Chemical interactions between bamboo fibres and the PP matrix were also evident in the form of reduced peak intensities in FT-IR spectra. Despite these interactions, limited adhesion between bamboo fibres and the PP matrix led to reduced stability and mechanical strength in the eco-composite panels. A direct correlation was observed between board thickness and the proportion of bamboo particles, with the 50:50 formulation showing the greatest thickness. Conversely, board strength decreased as bamboo particle concentration increased due to weak interfacial adhesion. Notably, panels made from treated rPP exhibited superior mechanical properties compared to those from untreated rPP, achieving a modulus of rupture (MOR) of 36.259 MPa and a modulus of elasticity (MOE) of 2048.215 MPa. These findings underscore the potential of utilizing nonwoven PP from disposable medical face masks, reinforced with bamboo fibre particles, to create eco-composite materials with enhanced sustainability and mechanical properties.

Insights on early response to acute heat shock of bovine mammary epithelial cells through a multi-method approach

Heat stress is a significant challenge in dairy cattle herds, affecting milk production and quality, and generating important changes at the cellular level. Most in vitro research on heat shock (HS) effects on dairy cow mammary cells was focused on medium-long-term effects. In recent years, Fourier transform-infrared (FT-IR) micro-spectroscopy has been increasingly used to study the effects of several external stresses on different cell lines, down to the level of single cellular components, such as DNA/RNA, lipids, and proteins. In this study, the possible changes at the biochemical and molecular level induced by acute (30 min-2 h) HS in bovine mammary epithelial (BME-UV1) cells were investigated. The cells were exposed to different temperatures, thermoneutral (TN, 37°C) and HS (42°C), and FT-IR spectra were acquired to analyse the effects of HS on biochemical characteristics of BME-UV1 cellular components (proteins, lipids, and DNA/RNA). Moreover, cell viability assay, reactive oxygen species production, and mRNA expression of heat shock proteins (HSPA1A, HSP90AA1, GRP78, GRP94) and antioxidant genes (SOD1, SOD2) by RT-qPCR were also analysed. The FT-IR results showed a change already at 30 min of HS exposure, in the content of long-chain fatty acids, which probably acted as a response to a modification of membrane fluidity in HS cells compared with TN cells. After 2 h of HS exposure, modification of DNA/RNA activity and accumulation of aggregated proteins was highlighted in HS cells. The gene expression analyses showed the overexpression of HSPA1A and HSP90AA1 starting from 30 minutes up to 2 h in HS cells compared with TN cells. At 2 h of HS exposure also the overexpression of GRP94 was observed in HS cells. Acute HS did not affect cell viability, reactive oxygen species level, and SOD1 and SOD2 gene expression of BME-UV1 cells. According to the results obtained, cells initiate early defense mechanisms in case of acute HS and probably this efficient response capacity may be decisive for tolerance to heat stress of dairy cattle.

Investigations of adsorption and photoluminescence properties of encapsulated Al–ZnO nanostructures: Synthesis, morphology and dye degradation studies

This study focuses on the solution combustion approach to examine the nanostructures of undoped and doped ZnO with different concentrations of Al (0.1 % and 0.2 %). Various physical techniques were utilized to characterize the synthesized nanoparticles. X-ray diffraction (XRD) revealed the crystalline materials, while scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) findings confirmed the products with particle size and the insertion of Al into the ZnO lattice. Fourier-transform infrared spectra (FTIR) confirmed the presence of different functional groups in the obtained material. The results indicate that Al-doped ZnO (Al–ZnO) nanoparticles show promising properties for optoelectronics and photoluminescence. Photoluminescence analysis indicated that an increase in Al3+ (0.2 %) concentration resulted in a decrease in peak intensity and an increase in the full width at half maximum. The band gap was calculated using the Taucs plot. The study also highlights the effectiveness of Zn1-xAlxO nanostructures in degrading organic pollutants, particularly in adsorbing Malachite Green (MG) dye. Among the samples, the 0.2 % Al-doped ZnO exhibited superior dye degradation efficiency due to its enhanced adsorption capacity and smaller particle size, as evidenced by multilayer adsorption capacity and chemisorption during the degradation process. This study provides valuable insights into the potential applications of Al-doped ZnO nanoparticles in various environmental and technological fields, emphasizing their significance in the degradation of organic pollutants.

Preparation and Characterization of Sustained Release Risperidone Loaded Eudragit Microparticles by Spray-Drying Technique

The goal of this work was to create novel risperidone-containing spray-dried microparticles using Eudragit® L100, a methacrylic polymer. Microparticles were designed with controlled release and enhanced in-vitro effects in mind and were meant to be taken orally. Spray-drying was used to create Eudragit® L100 microparticles loaded with risperidone. Risperidone-loaded Eudragit® L100 was successfully prepared to treat mental/mood disorders, according to an investigation into its physicochemical properties in-vitro. Spray-drying was an effective method for producing Eudragit® L100 microparticles loaded with risperidone. Formulations displayed a suitable drug entrapment percentage or nearly 89.94%. The mean diameter of the nearly spherical and spherical microparticles ranged from 30 to 50 μm, and they had a smooth surface. The distinctive peak of risperidone loaded with Eudragit L100 was visible in the fourier-transformed infrared (FTIR) spectra, indicating that the medication was fully encapsulated in the polymer. The dissolution rate of risperidone-loaded microparticles was slower than that of the pure medication. The use of spray-dried risperidone microparticles as a practical oral drug delivery method for more effective and regulated risperidone release is supported experimentally by our results.

Improved Classification Performance of Bacteria in Interference Using Raman and Fourier-Transform Infrared Spectroscopy Combined with Machine Learning.

The rapid and sensitive detection of pathogenic and suspicious bioaerosols are essential for public health protection. The impact of pollen on the identification of bacterial species by Raman and Fourier-Transform Infrared (FTIR) spectra cannot be overlooked. The spectral features of the fourteen class samples were preprocessed and extracted by machine learning algorithms to serve as input data for training purposes. The two types of spectral data were classified using classification models. The partial least squares discriminant analysis (PLS-DA) model achieved classification accuracies of 78.57% and 92.85%, respectively. The Raman spectral data were accurately classified by the support vector machine (SVM) algorithm, with a 100% accuracy rate. The two spectra and their fusion data were correctly classified with 100% accuracy by the random forest (RF) algorithm. The spectral processed algorithms investigated provide an efficient method for eliminating the impact of pollen interference.

Electrochemical Performance of Polyaniline‐Polyvanadate‐Copper Nanomaterials for the Detection of Benzoic Acid

AbstractThe introduction of nanomaterials as modified electrode materials into the field of electrochemical sensing is expected to improve the reliability, sensitivity, selectivity and repeatability of electrochemical sensors in detecting pollutants in the water environment. In this study, copper vanadate nanomaterials (Cu3V2O7(OH)2·2H2O, referred to as CVO) and Cu3V2O7(OH)2·2H2O/polyyaniline (PANI) composite nanomaterials (referred to as CVO/PANI) are successfully prepared and characterized by Fourier transform infrared spectrum (FTIR), X‐ray traveling‐action (XRD), scanning electron microscopy (SEM) and high‐resolution transmission electron microscopy (HR‐TEM). The modified glassy carbon electrodes (GCE) with these two materials are used for the detection of benzoic acid (BA) and exhibit excellent electrochemical sensing performance. The results show that two pairs of semi‐reversible redox peaks exist in both CVO and CVO/PANI modified glassy carbon electrode (GCE) in BA solution. The linear range of CVO and CVO/PANI nanomaterials‐modified GCE is 0.01–2 mm and 0.001–2 mm, and the limits of detection are 2.16 and 0.41 µm, respectively. PANI plays important role in the electrochemical responses of BA at CVO/PANI modified GCE. PANI enhances the intensities of CV peaks and electrochemical determination ability for BA.

Brucella pituitosastrain BU72, a new hydrocarbonoclastic bacterium through exopolysaccharide-based surfactant production.

Hydrocarbon and heavy metal pollution are amongst the most severe and prevalent environmental problems due to their toxicity and persistence. Bioremediation using microorganisms is considered one of the most effective ways to treat polluted sites. In the present study, we unveil the bioremediation potential of Brucella pituitosa strain BU72. Besides its ability to grow on multiple hydrocarbons as the sole carbon source and highly tolerant to several heavy metals, BU72 produces different exopolysaccharide-based surfactants (EBS) when grown with glucose or with crude oil as sole carbon source. These EBS demonstrated particular and specific functional groups as determined by Fourier transform infrared (FTIR) spectral analysis that showed a strong absorption peak at 3250 cm-1 generated by the -OH group for both EBS. The FTIR spectra of the produced EBS revealed major differences in functional groups and protein content. To better understand the EBS production coupled with the degradation of hydrocarbons and heavy metal resistance, the genome of strain BU72 was sequenced. Annotation of the genome revealed multiple genes putatively involved in EBS production pathways coupled with resistance to heavy metals genes such as arsenic tolerance and cobalt-zinc-cadmium resistance. The genome sequence analysis showed the potential of BU72 to synthesise secondary metabolites and the presence of genes involved in plant growth promotion. Here, we describe the physiological, metabolic, and genomic characteristics of Brucella pituitosa strain BU72, indicating its potential as a bioremediation agent.

Evaluation of the potential of Yushina alpina bamboo fibers from Cameroon for the manufacture of biocomposites

The Cameroon has two bamboo species indigenous to Africa (the alpine bamboo, Yushina alpina and the savannah bamboo, Oxytenanthera abyssinica), and one largely exotic species, Bambusa vulgaris. However, little on their physical characteristics and strength for the composites materials applications is known for these two indigenous bamboos species in Cameroon. Therefore, in this study, emphasis was laid on the alpine bamboo Y. alpina, to evaluate its potential for biocomposites applications. Y. alpina with ages ranging from 1 to 3 years, 4–5 years, and 7 years were characterized. The mechanical and physical properties of these three age ranges were compared. In the first place, the surface texture of the fibers was examined by scanning electron microscopy. Afterwards, chemical treatment was performed on the fibers with 1 % NaOH. In addition, the chemical bonds of the molecules (functional groups) were identified by Fourier transform infrared spectra (FTIR) and the thermal properties of the fibers were examined with a thermogravimetric analyzer. Furthermore, the fibers density was assessed using the Rilem protocol and a tensile testing machine was used to determine the mechanical properties of the treated fibers with 1 % of NaOH. Finally, a dynamic mechanical analysis of 7-year-old Y. alpina fibers was carry out. The results indicate that the Young's modulus of treated fibers with ages ranging from 1 to 3 years, 4–5 years, and 7 years were around 18 GPa, 10 GPa, and 14 GPa, respectively. In summary, this study underlines two primary points: (1) providing a platform for researchers to better understand the influence of age on the physical and mechanical properties of indigenous bamboo Y. alpina; and (2) providing a platform to validate suitable designs of biocomposites materials with Y. alpina.

A novel photocatalytic degradation of mixed dye through chemically synthesized ZnO/Fe2O3 nanocomposite.

This study reported the synthesis and assessment of zinc oxide/iron oxide (ZnO/Fe2O3) nanocomposite as photocatalysts for the degradation of a mixture of methylene red and methylene blue dyes. X-ray diffraction analysis confirms that the crystallite of zinc oxide (ZnO) has a hexagonal wurtzite phase and iron oxide (Fe2O3) has a rhombohedral phase. Fourier Transform Infra-Red spectrum confirms the presence of Zn-O vibration stretching at 428, 480 and 543cm-1 stretching confirming Fe-O bond formation. Scanning Electron Microscope images exhibited a diverse size and shape of the nanocomposites. The ZnO-90%/Fe2O3-10% and ZnO-10%/Fe2O3-90% nanocomposites reveal good photocatalytic activity with reaction rate constants of 1.5 × 10-2 and 0.66 × 10-2; and 1.3 × 10-2 and 0.60 × 10-2 for methylene blue and methyl red dye respectively. The results revealed that the synthesized ZnO/Fe2O3 nanocomposite is the best catalyst for dye degradation and can be used for industrial applications in future.

Semi-Supervised Autoencoder for Chemical Gas Classification with FTIR Spectrum.

Chemical warfare agents pose a serious threat due to their extreme toxicity, necessitating swift the identification of chemical gases and individual responses to the identified threats. Fourier transform infrared (FTIR) spectroscopy offers a method for remote material analysis, particularly in detecting colorless and odorless chemical agents. In this paper, we propose a deep neural network utilizing a semi-supervised autoencoder (SSAE) for the classification of chemical gases based on FTIR spectra. In contrast to traditional methods, the SSAE concurrently trains an autoencoder and a classifier attached to a latent vector of the autoencoder, enhancing feature extraction for classification. The SSAE was evaluated on laboratory-collected FTIR spectra, demonstrating a superior classification performance compared to existing methods. The efficacy of the SSAE lies in its ability to generate denser cluster distributions in latent vectors, thereby enhancing gas classification. This study established a consistent experimental environment for hyperparameter optimization, offering valuable insights into the influence of latent vectors on classification performance.

New molecular and macroscopic understandings of novel green chemicals based on Xanthan Gum and bio-surfactants for enhanced oil recovery

This research investigates the interactions between a novel environmentally friendly chemical fluid consisting of Xanthan gum and bio-based surfactants, and crude oil. The surfactants, derived from various leaves using the spray drying technique, were characterized using Fourier-transform infrared (FTIR) spectroscopy, zeta potential analysis, Dynamic light scattering, and evaluation of critical micelle concentration. Static emulsion tests were conducted to explore the emulsification between crude oil and the polymer-surfactant solution. Analysis of the bulk oil FTIR spectra revealed that saturated hydrocarbons and light aromatic hydrocarbons exhibited a higher tendency to adsorb onto the emulsion phase. Furthermore, the increased presence of polar hydrocarbons in emulsion phases generated by polar surfactants confirmed the activation of electrostatic forces in fluid–fluid interactions. Nuclear magnetic resonance spectroscopy showed that the xanthan solution without surfactants had a greater potential to adsorb asphaltenes with highly fused aromatic rings, while the presence of bio-based surfactants reduced the solution's ability to adsorb asphaltenes with larger cores. Microfluidic tests demonstrated that incorporating surfactants derived from Morus nigra and Aloevera leaves into the xanthan solution enhanced oil recovery. While injection of the xanthan solution resulted in a 49.8% recovery rate, the addition of Morus nigra and Aloevera leaf-derived surfactants to the xanthan solution increased oil recovery to 58.1% and 55.8%, respectively.

First report of betalain production from endolichenic Bacillus sp. LDAB-1 from Dirinaria aegilita: Insights from novel quantification methodology of image processing.

Pigments are widely used in food supplements envisaging attractive colors along with health benefits. The desired advancements in the nutraceutical and antioxidant properties of pigments utilized in food products necessitate the search for novel additives. The present study is the first in the field to report the pigment-producing endolichenic bacteria, Bacillus sp. LDAB-1 from Dirinaria aegilita. Morphological, biochemical, and molecular characterization of the bacterium emphasizes that ideal pigment production occurs when utilizing sucrose and sodium nitrate. The pigment was salted out and dialyzed for further qualitative characterization using ultraviolet-visible, fluorescence, and Fourier transforminfraredspectra and the results corroborated the presence of betalains. The antioxidant activity of betalain is closer to the efficiency of α-tocopherol, which confers the pigment properties for antioxidant and nutraceutical significance. An optimal methodology for pigment affirmation is an issue when using an alternative methodology. Hence, the present assessment employs a comparative analysis of findings from both a spectrophotometric method and image processing technology encompassing RGB, CMYK, YCbCr, and L*a*b*color space models. Amongst these, the L*a*b* model potentially provides an effective modality for determining the pigment concentration. Bland-Altman plot analysis indicates similar consistency levels in betalain quantification by both methods at 95% confidence intervals, affirming the integrity and consistency of color image processing technology. Consequently, the present study represents novelty and innovativeness in reporting endolichenic Bacillus sp. LDAB-1 from D. aegilita and a rational image optimization protocol for pigment elucidation characteristics.