Four-arm Poly Ethylene Glycol Research Articles

Development of ROS-sensitive capofungin hydrogel by crosslinking chitosan with four-arm polyethylene glycol derivative for treatment of vulvovaginal candidiasis

Both exogenous and endogenous reactive oxygen species (ROS) in vulvovaginal candidiasis (VVC) play pivotal roles in promoting the hyphal formation of Candida albicans (CA), which suggests that clearing ROS could inhibit CA hyphae formation. A ROS-sensitive hydrogel (CAS@4Arm-PB/CS) was formulated by using a novel four-arm polyethylene glycol (4Arm-PEG) derivative (4Arm-PB) as a crosslinking agent, chitosan (CS) as the hydrogel matrix, and caspofungin (CAS) as the antifungal drug against CA. The ROS-sensitivity, disintegration mechanism, crosslinking action, swelling degree, microstructure, modulus, and rheological properties of 4Arm-PB were characterized. According to the results, 5.0 % 4Arm-PB could quickly and efficiently cross-link 0.5 mg/mL of CS. The ROS-sensitivity of 4Arm-PB was 10–50 μM, indicating a strong ROS sensitivity. The in vitro and in vivo anti-CA results indicated that CAS@4Arm-PB/CS not only cleared endogenous and exogenous ROS and inhibited the formation of CA hyphae and biofilm but also contributed beneficially to the treatment of VVC mice caused by CA infection, implying a certain safety aspect and an in vivo applicability. This research introduces a novel functional crosslinking agent for CS hydrogel formulation, presenting a new avenue for hydrogel-based drug delivery systems and therapeutic strategies for VVC treatment.

Redefining vascular repair: revealing cellular responses on PEUU-gelatin electrospun vascular grafts for endothelialization and immune responses on in vitro models.

Tissue-engineered vascular grafts (TEVGs) poised for regenerative applications are central to effective vascular repair, with their efficacy being significantly influenced by scaffold architecture and the strategic distribution of bioactive molecules either embedded within the scaffold or elicited from responsive tissues. Despite substantial advancements over recent decades, a thorough understanding of the critical cellular dynamics for clinical success remains to be fully elucidated. Graft failure, often ascribed to thrombogenesis, intimal hyperplasia, or calcification, is predominantly linked to improperly modulated inflammatory reactions. The orchestrated behavior of repopulating cells is crucial for both initial endothelialization and the subsequent differentiation of vascular wall stem cells into functional phenotypes. This necessitates the TEVG to provide an optimal milieu wherein immune cells can promote early angiogenesis and cell recruitment, all while averting persistent inflammation. In this study, we present an innovative TEVG designed to enhance cellular responses by integrating a physicochemical gradient through a multilayered structure utilizing synthetic (poly (ester urethane urea), PEUU) and natural polymers (Gelatin B), thereby modulating inflammatory reactions. The luminal surface is functionalized with a four-arm polyethylene glycol (P4A) to mitigate thrombogenesis, while the incorporation of adhesive peptides (RGD/SV) fosters the adhesion and maturation of functional endothelial cells. The resultant multilayered TEVG, with a diameter of 3.0cm and a length of 11cm, exhibits differential porosity along its layers and mechanical properties commensurate with those of native porcine carotid arteries. Analyses indicate high biocompatibility and low thrombogenicity while enabling luminal endothelialization and functional phenotypic behavior, thus limiting inflammation in in-vitro models. The vascular wall demonstrated low immunogenicity with an initial acute inflammatory phase, transitioning towards a pro-regenerative M2 macrophage-predominant phase. These findings underscore the potential of the designed TEVG in inducing favorable immunomodulatory and pro-regenerative environments, thus holding promise for future clinical applications in vascular tissue engineering.

Electrospun composite-coated endotracheal tubes with controlled siRNA and drug delivery to lubricate and minimize upper airway injury

Endotracheal Tubes (ETTs) maintain and secure a patent airway; however, prolonged intubation often results in unintended injury to the mucosal epithelium and inflammatory sequelae which complicate recovery. ETT design and materials used have yet to adapt to address intubation associated complications. In this study, a composite coating of electrospun polycaprolactone (PCL) fibers embedded in a four-arm polyethylene glycol acrylate matrix (4APEGA) is developed to transform the ETT from a mechanical device to a dual-purpose device capable of delivering multiple therapeutics while preserving coating integrity. Further, the composite coating system (PCL-4APEGA) is capable of sustained delivery of dexamethasone from the PCL phase and small interfering RNA (siRNA) containing polyplexes from the 4APEGA phase. The siRNA is released rapidly and targets smad3 for immediate reduction in pro-fibrotic transforming growth factor-beta 1 (TGFϐ1) signaling in the upper airway mucosa as well as suppressing long-term sequelae in inflammation from prolonged intubation. A bioreactor was used to study mucosal adhesion to the composite PCL-4APEGA coated ETTs and investigate continued mucus secretory function in ex vivo epithelial samples. The addition of the 4APEGA coating and siRNA delivery to the dexamethasone delivery was then evaluated in a swine model of intubation injury and observed to restore mechanical function of the vocal folds and maintain epithelial thickness when observed over 14 days of intubation. This study demonstrated that increase in surface lubrication paired with surface stiffness reduction significantly decreased fibrotic behavior while reducing epithelial adhesion and abrasion.

Prolonged delivery of HIV-1 vaccine nanoparticles from hydrogels

Immunization is a straightforward concept but remains for some pathogens like HIV-1 a challenge. Thus, new approaches towards increasing the efficacy of vaccines are required to turn the tide. There is increasing evidence that antigen exposure over several days to weeks induces a much stronger and more sustained immune response compared to traditional bolus injection, which usually leads to antigen elimination from the body within a couple of days. Therefore, we developed a poly(ethylene) glycol (PEG) hydrogel platform to investigate the principal feasibility of a sustained release of antigens to mimic natural infection kinetics. Eight-and four-armed PEG macromonomers of different MWs (10, 20, and 40 kDa) were end-group functionalized to allow for hydrogel formation via covalent cross-linking. An HIV-1 envelope (Env) antigen in its trimeric (Envtri) or monomeric (Envmono) form was applied. The soluble Env antigen was compared to a formulation of Env attached to silica nanoparticles (Env-SiNPs). The latter are known to have a higher immunogenicity compared to their soluble counterparts. Hydrogels were tunable regarding the rheological behavior allowing for different degradation times and release timeframes of Env-SiNPs over two to up to 50 days. Affinity measurements of the VCR01 antibody which specifically recognizes the CD4 binding site of Env, revealed that neither the integrity nor the functionality of Envmono-SiNPs (Kd = 2.1 ± 0.9 nM) and Envtri-SiNPs (Kd = 1.5 ± 1.3 nM), respectively, were impaired after release from the hydrogel (Kd before release: 2.1 ± 0.1 and 7.8 ± 5.3 nM, respectively). Finally, soluble Env and Env-SiNPs which are two physico-chemically distinct compounds, were co-delivered and shown to be sequentially released from one hydrogel which could be beneficial in terms of heterologous immunization or single dose vaccination. In summary, this study presents a tunable, versatile applicable, and effective delivery platform that could improve vaccination effectiveness also for other infectious diseases than HIV-1.

Enhanced split-type photoelectrochemical aptasensor incorporating a robust antifouling coating derived from four-armed polyethylene glycol

Antifouling biosensors capable of preventing protein nonspecific adhesion in real human bodily fluids are highly sought-after for precise disease diagnosis and treatment. In this context, an enhanced split-type photoelectrochemical (PEC) aptasensor was developed incorporating a four-armed polyethylene glycol (4A-PEG) to construct a robust antifouling coating, enabling accurate and sensitive bioanalysis. The split-type PEC system involved the photoelectrode and the biocathode, effectively separating signal converter with biorecogniton events. Specifically, the TiO2 electrode underwent sequential modification with ZnIn2S4 (ZIS) and polydopamine (PDA) to form the PDA/ZIS/TiO2 photoelectrode. The cathode substrate was synthesized as a hybrid of N-doped graphene loaded with Pt nanoparticles (NG-Pt), and subsequently modified with 4A-PEG to establish a robust antifouling coating. Following the anchoring of probe DNA (pDNA) on the 4A-PEG-grafted antifouling coating, the biocathode for model target of cancer antigen 125 (CA125) was obtained. Leveraging pronounced photocurrent output of the photoelectrode and commendable antifouling characteristics of the biocathode, the split-type PEC aptasensor showcased exceptional detection performances with high sensitivity, good selectivity, antifouling ability, and potential feasibility.

3D Bioprintable Hydrogel with Tunable Stiffness for Exploring Cells Encapsulated in Matrices of Differing Stiffnesses.

In vitro cell models have undergone a shift from 2D models on glass slides to 3D models that better reflect the native 3D microenvironment. 3D bioprinting promises to progress the field by allowing the high-throughput production of reproducible cell-laden structures with high fidelity. The current stiffness range of printable matrices surrounding the cells that mimic the extracellular matrix environment remains limited. The work presented herein aims to expand the range of stiffnesses by utilizing a four-armed polyethylene glycol with maleimide-functionalized arms. The complementary cross-linkers comprised a matrix metalloprotease-degradable peptide and a four-armed thiolated polymer which were adjusted in ratio to tune the stiffness. The modularity of this system allows for a simple method of controlling stiffness and the addition of biological motifs. The application of this system in drop-on-demand printing is validated using MCF-7 cells, which were monitored for viability and proliferation. This study shows the potential of this system for the high-throughput investigation of the effects of stiffness and biological motif compositions in relation to cell behaviors.

Pulmonary delivery of immune checkpoint inhibitors using a responsive polyethylene glycol nanogel for treating lung metastasis

Pulmonary delivery of immune checkpoint inhibitors (ICIs) holds promise for increasing drug concentration in the lung and reducing off-target side effects compared to systemic administration. However, the development of an ideal carrier capable of efficiently encapsulating ICIs, maintaining stability during fabrication and nebulization, and facilitating transport through the mucus barrier remains a significant challenge. Herein, we developed such a carrier by synthesizing a responsive polyethylene glycol (PEG) nanogel through crosslinking four-arm PEG via copper-free click chemistry. This approach allows for the efficient in situ encapsulation of ICIs using biocompatible PEG, eliminating the need for potentially toxic catalysts or coupling reagents. The covalently crosslinked network ensures excellent colloidal stability of nanogel during nebulization. Importantly, the PEG nanogel greatly enhances the mucus penetration and lung accumulation of free ICIs. Upon reaching the tumors, the PEG nanogel undergoes dissolution triggered by the overexpressed matrix metalloproteinase-9, leading to the release of encapsulated ICIs. We demonstrated that pulmonary delivery of PEG nanogel greatly enhanced the therapeutic efficacy of ICIs and alleviated the potential toxicity associated with intravenously injected ICIs using a lung metastasis model in mice. Overall, this work presents a simple, safe, and effective PEG nanogel platform for the pulmonary delivery of ICIs.

Non-Covalently Associated Streptavidin Multi-Arm Nanohubs Exhibit Mechanical and Thermal Stability in Cross-Linked Protein-Network Materials.

Constructing protein-network materials that exhibit physicochemical and mechanical properties of individual protein constituents requires molecular cross-linkers with specificity and stability. A well-known example involves specific chemical fusion of a four-arm polyethylene glycol (tetra-PEG) to desired proteins with secondary cross-linkers. However, it is necessary to investigate tetra-PEG-like biomolecular cross-linkers that are genetically fused to the proteins, simplifying synthesis by removing additional conjugation and purification steps. Non-covalently, self-associating, streptavidin homotetramer is a viable, biomolecular alternative to tetra-PEG. Here, a multi-arm streptavidin design is characterized as a protein-network material platform using various secondary, biomolecular cross-linkers, such as high-affinity physical (i.e., non-covalent), transient physical, spontaneous chemical (i.e., covalent), or stimuli-induced chemical cross-linkers. Stimuli-induced, chemical cross-linkers fused to multi-arm streptavidin nanohubs provide sufficient diffusion prior to initiating permanent covalent bonds, allowing proper characterization of streptavidin nanohubs. Surprisingly, non-covalently associated streptavidin nanohubs exhibit extreme stability, which translates into material properties that resemble hydrogels formed by chemical bonds even at high temperatures. Therefore, this study not only establishes that the streptavidin nanohub is an ideal multi-arm biopolymer precursor but also provides valuable guidance for designing self-assembling nanostructured molecular networks that can properly harness the extraordinary properties of protein-based building blocks.

Adjustable biodegradability of low-swelling hydrogels prepared from recombinant peptides based on human collagen type 1.

An ideal hydrogel for tissue engineering and regenerative therapy is cytocompatible, biocompatible, and has low-swelling characteristics. Recently, a novel low-swelling hydrogel with a homogenous structure was developed by crosslinking a recombinant peptide, modeled on human collagen type 1 (RCPhC1), with a four-arm polyethylene glycol (tetra-PEG). Here, we hypothesized that the biodegradability of the RCPhC1 hydrogel was adjustable by altering its initial polymer concentration. Three types of RCPhC1 hydrogels were prepared using the initial polymer at different concentrations, and their morphology, swelling ratio, collagenase degradability, cytocompatibility, biocompatibility, and biodegradability were compared. The results revealed a low swelling ratio. The higher the concentration of the initial polymer, the longer it took for it to be degraded by collagenase. The average cell viability ratio was over 92% when using the direct contact method, which suggests that the hydrogels have excellent cytocompatibility. No death, tumorigenesis, exposure of the implants, or skin necrosis associated with the subcutaneous implantation of the hydrogels was found in mice in vivo. Moreover, histological evaluation revealed the formation of a thin fibrous capsule, which suggests an acceptable biocompatibility. Furthermore, as hypothesized, it was confirmed that the biodegradability can be adjusted by changing the initial polymer concentration. Collectively, the ability to fine-tune the biodegradability of RCPhC1 hydrogels demonstrates their potential for use in various clinical applications.

A Versatile Hydrophilic and Antifouling Coating Based on Dopamine Modified Four-Arm Polyethylene Glycol by One-Step Synthesis Method.

A versatile hydrophilic and antifouling coating was designed and prepared based on catechol-modified four-arm polyethylene glycol. The dopamine (DA) molecules were grafted onto the end of the four-arm polyethylene glycol carboxyl (4A-PEG-COOH) through the amidation reaction, which was proven by 1H NMR and FTIR analysis, assisting the strong adhesion of PEG on the surface of various types of materials, including metallic, inorganic, and polymeric materials. The reduction of the water contact angle and the bacteria-repellent and protein-repellent effects indicated that the coating had good hydrophilicity and antifouling performance. Raman spectroscopy analysis demonstrated the affinity between the polymeric surface and water, which further confirmed the hydrophilicity of the coating. Finally, in vitro cytotoxicity assay demonstrated good biocompatibility of the coating layer.

Enhanced performance of Rhizopus oryzae lipase immobilized onto a hybrid-nanocomposite matrix and its application for biodiesel production under the assistance of ultrasonic technique

In this study, a hybrid nanocomposite composed of superparamagnetic multi-walled nanotubes and four-arm polyethylene glycol amine (mMWCNTs@4-arm-PEG-NH2) was synthesized and employed as a matrix for covalent immobilization Rhizopus oryzae lipase. The performance of immobilized lipase (ROL-mMWCNTs@4-arm-PEG-NH2) was greatly improved, with maximum activity recovery of 3073% and a 30.73-fold superior in specific activity than its free form under optimum conditions: glutaraldehyde concentration 7.5 wt%, pH 7.0, immobilization temperature 40 °C, and immobilization time 2.5 h. The thermostability of ROL-mMWCNTs@4-arm-PEG-NH2 was 57.33% of its initial activity at 70 °C, a 13-fold higher than its free counterpart. Most significantly, ROL-mMWCNTs@4-arm-PEG-NH2 was applied for waste cooking oil transesterification to prepare biodiesel with the assistance of ultrasonic technique. Under optimized conditions: methanol/oil molar ratio 4:1, co-solvent 20%wt., water content 10%wt. at 40 ± 1 °C and ultrasound-assisted condition of 40% power and 40 kHz frequency, the highest conversion yield reached 94.72% within150 min. This was due to the ultrasound-assisted process leading to efficient yield in a short processing time. The immobilized ROL could maintain 71.55% biodiesel yield after 10 reuse cycles, indicating efficient operational stability. Therefore, ROL-mMWCNTs@4-arm-PEG-NH2 is a promising nanobiocatalyst, and ultrasound-assisted enzymatic reaction is a fast and clean process; together, they have potential use in future industrial applications.

Analysis of model drug permeation through highly crosslinked and biodegradable polyethylene glycol membranes

Various natural and synthetic polymers, such as hyaluronan and functionalized polyethylene glycol (PEG), have been used to fabricate biodegradable membranes. They can potentially be used for local drug release in the body because of their biodegradability. However, this biodegradability causes to difficulties in sustained drug release, and an insufficient ability to control drug permeability can lead to adverse effects. In this study, we developed biodegradable lyophilized PEG membranes from highly crosslinked PEG hydrogels to control drug permeation. Three-arm thiol-modified PEG (PEG-SH, molecular weight [ M w ] = 1300) and four-arm acrylate-modified PEG (PEG-AC, M w = 1892) were used to fabricate the PEG hydrogels, which were then lyophilized to obtain PEG membranes. The degradation time of these PEG membranes was 25 days under physiological conditions. Despite their biodegradability, the membranes allowed the permeation of model drugs constantly until complete degradation around physiological pH. The normalized diffusion coefficients (ln[ D / D 0 ]) for vitamin B 12 and lysozyme (Lys) were −2.6 and −4.8, respectively. In addition, the membranes showed biodegradability and biocompatibility in the abdominal cavity of mice. These results indicate that PEG membranes can be used for sustained drug release in the body due to their biodegradability and drug permeability. • Highly crosslinked, lyophilized polyethylene glycol (PEG) membranes were developed. • Permeability of several model drugs through the PEG membranes was analyzed. • The measured permeability of the drugs depended on their molecular weight. • PEG membranes indicated pH-dependent degradability and release kinetics. • PEG membranes showed excellent biocompatibility and biodegradability in mice.

Controlling Degradation and Erosion of Polymer Networks: Insights from Mesoscale Modeling.

Understanding and controlling degradation of polymer networks on the mesoscale is critical for a range of applications. We utilize dissipative particle dynamics to capture photocontrolled degradation and erosion processes in hydrogels formed by end-linking of four-arm polyethylene glycol precursors. We demonstrate that the polydispersity and the fraction of broken-off fragments scale with the relative extent of reaction. The reverse gel point measured is close to the value predicted by the bond percolation theory on a diamond lattice. We characterize the erosion process via tracking the mass loss that accounts for the fragments remaining in contact with the percolated network. We quantify the dependence of the mass loss on the extent of reaction and on the properties of the film prior to degradation. These results elucidate the main features of degradation and erosion on the mesoscale and could provide guidelines for future design of degrading materials with dynamically controlled properties.

Co-Immobilization of Rhizopus oryzae and Candida rugosa Lipases onto mMWCNTs@4-arm-PEG-NH2-A Novel Magnetic Nanotube-Polyethylene Glycol Amine Composite-And Its Applications for Biodiesel Production.

This article describes the successful synthesis of a novel nanocomposite of superparamagnetic multi-walled nanotubes with a four-arm polyethylene glycol amine polymer (mMWCNTs@4-arm-PEG-NH2). This composite was then employed as a support for the covalent co-immobilization of Rhizopus oryzae and Candida rugosa lipases under appropriate conditions. The co-immobilized lipases (CIL-mMWCNTs@4-arm-PEG-NH2) exhibited maximum specific activity of 99.626U/mg protein, which was 34.5-fold superior to that of free ROL, and its thermal stability was greatly improved. Most significantly, CIL-mMWCNTs@4-arm-PEG-NH2 was used to prepare biodiesel from waste cooking oil under ultrasound conditions, and within 120 min, the biodiesel conversion rate reached 97.64%. This was due to the synergy effect between ROL and CRL and the ultrasound-assisted enzymatic process, resulting in an increased biodiesel yield in a short reaction time. Moreover, after ten reuse cycles, the co-immobilized lipases still retained a biodiesel yield of over 78.55%, exhibiting excellent operational stability that is attractive for practical applications. Consequently, the combined use of a novel designed carrier, the co-immobilized lipases with synergy effect, and the ultrasound-assisted enzymatic reaction exhibited potential prospects for future applications in biodiesel production and various industrial applications.

Efficacy and safety of scleral crosslinking using poly(ethylene glycol)ether tetrasuccinimidyl glutarate for form-deprivation myopia progression in rabbits.

Myopia is becoming increasingly prevalent worldwide at an alarming rate. However, no effective treatment is available for inhibiting myopia progression. Materials chemistry advancements have made it possible to regulate mechanical properties and rate of degradation with good compatibility by developing newly crosslinking systems such as the branched polyethylene glycol (PEG) systems. Herein, we presented a PEG molecule with N-hydroxysuccinimide (NHS) ester functional groups at the chain ends as a macromolecular crosslinking agent for the treatment of myopia. We found that the scleral collagen crosslinked with the four-armed star-shaped PEG molecule with NHS ester functional group (4S-PEG) showed better biomechanical properties, increased thermal stability and higher resistance to degradation. 4S-PEG exhibited relatively low cytotoxicity for human fetal scleral fibroblasts. The retrobulbar injection of 4S-PEG at a relatively low concentration (2.5 mM) showed good effective control of the progression of form-deprivation myopia in rabbits. There were no signs of adverse effect or damage by repeated injections with 4S-PEG in rabbits. The results of this work demonstrate that 4S-PEG can serve as a robust macromolecular crosslinking agent and is expected to have promise for application in the treatment of the progression of myopia.

Long-Term Continuous Glucose Monitoring Using a Fluorescence-Based Biocompatible Hydrogel Glucose Sensor.

Fluorescence-based hydrogel glucose sensors with boronic acid-based glucose recognition are promising regarding their potential to improve continuous glucose monitoring by facilitating long-lasting accuracy. However, these sensors typically become encapsulated after implantation, and the dynamic range decreases following long-term implantation and use. Herein, a four-arm polyethylene glycol (PEG) hydrogel is developed with an immobilized glucose-responsive fluorescence dye (GF-PEG-gel); this hydrogel is effective in mitigating foreign body reactions (FBRs) that hinder stable glucose responses in vivo. The GF-PEG-gel attached to an implantable device successfully traces blood glucose concentrations in diabetic model rats for 45 days. A pig experiment shows that the device measures the glucose concentration with an equivalent accuracy to that required for clinically available settings.

Dual-Functionalizable Streptavidin-SpyCatcher-Fused Protein-Polymer Hydrogels as Scaffolds for Cell Culture.

Hydrogels possessing the ability to control cell functions have great potential as artificial substrates for cell culture. Herein, we report dual-functionalizable protein-polymer hybrid hydrogels prepared by thiol oxidation catalyzed by horseradish peroxidase and a phenolic molecule. A chimera protein of streptavidin (SA) and the SpyCatcher protein, with a cysteine residue at its N-terminus, (C-SA-SC) was constructed and co-cross-linked with thiol-functionalized four-arm polyethylene glycol (PEG-SH) to obtain hydrogels possessing two orthogonal conjugation moieties. Hydrogel formation using C-SA-SC conjugated with biotinylated or SpyTagged functional molecules (premodification strategy) resulted in the formation of hydrogels with a uniform distribution of the functional molecules. Postmodification of the functional molecules of the C-SA-SC hydrogel with biotin or SpyTag could alter the three-dimensional (3D) spatial distribution of the functional molecules within the hydrogels depending on the mode of conjugation (SA/biotin or SpyCatcher/SpyTag), the size of the functional molecules, and the length of time of the modification. NIH-3T3 cells cultured on a C-SA-SC hydrogel, dual-functionalized with a biotinylated-Arg-Gly-Asp-Ser (RGDS) peptide and a basic fibroblast growth factor (bFGF) with SpyTag, showed cell adhesion to the PEG-SH-based hydrogels and cell morphological changes in response to the immobilized RGDS peptide and the bFGF. Moreover, the cells showed higher proliferation on the dual-functionalized C-SA-SC hydrogel than the cells cultured on hydrogels without either the RGDS peptide or the bFGF, demonstrating the benefits of dual-functionalizable hydrogels. The C-SA-SC hydrogel presented in this study is capable of being orthogonally functionalized by two different functional molecules with different 3D distributions of each molecule within the hydrogel and thus has the potential for use as a cell culturing scaffold for creating artificial cellular microstructures.

Injectable, anti-inflammatory and conductive hydrogels based on graphene oxide and diacerein-terminated four-armed polyethylene glycol for spinal cord injury repair

Patients with spinal cord injury (SCI) often suffer from permanent disabilities because of the low regeneration ability of adult axons. Hydrogels can serve as the scaffolding materials to bridge the damaged tissue and facilitate endogenous axonal regeneration. Here, we report a supramolecular hydrogel made of graphene oxide and diacerein-terminated four-armed polyethylene glycol for SCI repair. The hydrogel is mechanically compliant and injectable, thus can be delivered to the SCI lesions in a minimally invasive way. As diacerein is an anti-inflammatory drug, the hydrogel loaded with free diacerein can minimize the inflammatory response and prevent the formation of inhibitory microenvironment. Moreover, the suitable conductivity of the hydrogel promotes the growth of neuron and the remyelination of axons. We validate the outstanding mechanical, biochemical and electric properties of the designed hydrogel in vitro and also demonstrate their successful applications in SCI repair in vivo using the rat model. We anticipate that with the advances of our understanding of the biology of SCI lesions and of the axonal growth mechanism, more sophisticated SCI repair hydrogels can be designed to fully achieve functional recovery of SCI.

Self-Healing Injectable Polymer Hydrogel via Dynamic Thiol-Alkynone Double Addition Cross-Links.

Introduction of dynamic thiol-alkynone double addition cross-links in a polymer network enable the formation of a self-healing injectable polymer hydrogel. A four-arm polyethylene glycol (PEG) tetra-thiol star polymer is cross-linked by a small molecule alkynone via the thiol-alkynone double adduct to generate a hydrogel network under ambient aqueous conditions (buffer pH = 7.4 or 8.2, room temperature). The mechanical properties of these hydrogels can be easily tuned by varying the concentration of polymer precursors. Through the dynamic thiol-alkynone double addition cross-link, these hydrogels are self-healing and shear thinning, as demonstrated by rheological measurements, macroscopic self-healing, and injection tests. These hydrogels can be injected through a 20G syringe needle and recover after extrusion. In addition, good cytocompatibility of these hydrogels is confirmed by cytotoxicity test. This work shows the application of the thiol-alkynone double addition dynamic covalent chemistry in the straightforward preparation of self-healing injectable hydrogels, which may find future biomedical applications such as tissue engineering and drug delivery.

Palladium nanosheet-knotted injectable hydrogels formed via palladium-sulfur bonding for synergistic chemo-photothermal therapy.

Nanoparticle (NP)-based hydrogels that can introduce synergistic advantages to the novel three-dimensional scaffold have garnered much attention recently. However, the application of NP-crosslinked hydrogels still remains challenging due to the complicated synthesis and/or modification of the NPs and the changed properties of the NPs after gelation. Herein, a novel palladium nanosheet (Pd NS)-based hydrogel (Pd Gel) with Pd NSs as crosslinkers was obtained by simply mixing Pd NSs with thiol-terminated four-arm polyethylene glycol (4arm-PEG-thiol). It was found that the formed Pd Gel was injectable, possibly due to the dynamic Pd-S bonds formed between Pd NSs and 4arm-PEG-thiol. In addition, compared with free Pd NSs, the Pd NSs within the hydrogel exhibited a significantly higher stability. We have further demonstrated that the formed hydrogel could encapsulate the commonly used anticancer drug doxorubicin (DOX) to form DOX@Pd Gel for combined chemo-photothermal therapy. Particularly, Pd NSs with a high absorption in the near-infrared (NIR) region could convert the energy of NIR laser into heat with a high efficiency, which is beneficial for photothermal therapy. Moreover, DOX@Pd Gel could maintain a sustainable release of DOX and the NIR laser irradiation could accelerate this drug release process. Then, the explosively released DOX and the hyperthermia generated from Pd NSs under NIR laser irradiation acted in a synergistic way to realize the combined therapeutic effect of the chemo-photothermal treatment. Finally, the in vivo anticancer effect and safety of the combined therapy were also verified by the tumor-bearing mouse model. Taken together, this work constructs a NP-crosslinked, NIR laser-activatable and injectable photothermal hydrogel via dynamic Pd-S bonding, and demonstrates that the hydrogel allows us to release DOX more precisely, eliminate tumor more effectively and inhibit tumor metastasis more persistently, which will advance the development of novel anticancer strategies.