Förster Resonance Energy Transfer Donor Research Articles

Phage-induced “one-to-many” FRET sensor for highly sensitive detection of Escherichia coli O157:H7

As a foodborne pathogen capable of causing severe illnesses, early detection of Escherichia coli O157:H7 (E. coli O157:H7) is crucial for ensuring food safety. While Förster resonance energy transfer (FRET) is an efficient and precise detection technique, there remains a need for amplification strategies to detect low concentrations of E. coli O157:H7. In this study, we presented a phage (M13)-induced “one to many” FRET platform for sensitively detecting E. coli O157:H7. The aptamers, which specifically recognize E. coli O157:H7 were attached to magnetic beads as capture probes for separating E. coli O157:H7 from food samples. The peptide O157S, which specifically targets E. coli O157:H7, and streptavidin binding peptide (SBP), which binds to streptavidin (SA), were displayed on the P3 and P8 proteins of M13, respectively, to construct the O157S-M13K07-SBP phage as a detection probe for signal output. Due to the precise distance (≈3.2 nm) between two neighboring N-terminus of P8 protein, the SA-labeled FRET donor and acceptor can be fixed at the Förster distance on the surface of O157S-M13K07-SBP via the binding of SA and SBP, inducing FRET. Moreover, the P8 protein, with ≈2700 copies, enabled multiple FRET (≈605) occurrences, amplifying FRET in each E. coli O157:H7 recognition event. The O157S-M13K07-SBP-based FRET sensor can detect E. coli O157:H7 at concentration as low as 6 CFU/mL and demonstrates excellent performance in terms of selectivity, detection time (≈3 h), accuracy, precision, practical application, and storage stability. In summary, we have developed a powerful tool for detecting various targets in food safety, environmental monitoring, and medical diagnosis.

Rapid detection of spermine by using a cost-effective carbon nanostructured aptasensor

Spermine is a polyamine that participates in ion channel regulation and cell proliferation. It is considered a biomarker for pancreatic cancer. In this study, a carbon nanostructure-based aptasensor has been developed to rapidly detect spermine in solution by relying on Förster resonance energy transfer (FRET). The FRET donor, carbon quantum dots (CDs), are bioconjugated to aptamers specific for spermine. CDs have an average diameter of 5.0 ± 2.5 nm and have the maximum fluorescence intensity emitting at 510 nm when excited at 400 nm. Due to the π-π* interaction between DNA-based aptamer and GO, a FRET quencher, CDs bioconjugated with aptamer (CDs-aptamer) can directly attach on the surface of GO, resulting in significant FRET quenching. In the presence of spermine, GO and CDs-Aptamer separate, and the fluorescence intensity of CDs is restored. The restored fluorescence intensity of CD-aptamer can be observed when the concentration of spermine increases from 0.1 to 250 nM. The sensing system in this study could be a cost-effective, user-friendly method to quickly detect spermine, a biomarker for pancreatic cancer.

FRET-GP - A Local Measure of the Impact of Transmembrane Peptide on Lipids.

Reconstitution of a transmembrane protein in model lipid systems allows studying its structure and dynamics in isolation from the complexity of the natural environment. This approach also provides a well-defined environment for studying the interactions of proteins with lipids. In this work, we describe the FRET-GP method, which utilizes Förster resonance energy transfer (FRET) to specifically probe the nanoenvironment of a transmembrane domain. The tryptophan residues flanking this domain act as efficient FRET donors, while Laurdan acts as acceptor. The fluorescence of this solvatochromic probe is quantified using generalized polarization (GP) to report on lipid mobility in the vicinity of the transmembrane domain. We applied FRET-GP to study the transmembrane peptide WALP incorporated in liposomes. We found that the direct excitation of Laurdan to its second singlet state strongly contributes to GP values measured in FRET conditions. Removal of this parasitic contribution was essential for proper determination of GPFRET - the local analogue of classical GP parameter. The presence of WALP significantly increased both parameters but the local effects were considerably stronger (GPFRET ≫ GP). We conclude that WALP restricts lipid movement in its vicinity, inducing lateral inhomogeneity in membrane fluidity. WALP was also found to influence lipid phase transition. Our findings demonstrated that FRET-GP simultaneously provides local and global results, thereby enhancing the depth of information obtained from the measurement. We highlight the simplicity and sensitivity of the method, but also discuss its potential and limitations in studying protein-lipid interactions.

Characterizing the Ligand Shell Morphology of PEG-Coated ZnO Nanocrystals Using FRET Spectroscopy.

Poly(ethylene glycol) (PEG) ligands can inhibit proteins and other biomolecules from adhering to underlying surfaces, making them excellent surface ligands for nanocrystal (NC)-based drug carriers. Quantifying the PEG ligand shell morphology is important because its structure determines the permeability of biomolecules through the shell to the NC surface. However, few in situ analytical tools can reveal whether the PEG ligands form either an impenetrable barrier or a porous coating surrounding the NC. Here, we present a Förster resonance energy transfer (FRET) spectroscopy-based approach that can assess the permeability of molecules through PEG-coated ZnO NCs. In this approach, ZnO NCs serve as FRET donors, and freely diffusing molecules in the bulk solution are FRET acceptors. We synthesized a series of variable chain length PEG-silane-coated ZnO NCs such that the longest chain length ligands far exceed the Förster radius (R0), where the energy transfer (EnT) efficiency is 50%. We quantified the EnT efficiency as a function of the ligand chain length using time-resolved photoluminescence lifetime (TRPL) spectroscopy within the framework of FRET theory. Unexpectedly, the longest PEG-silane ligand showed equivalent EnT efficiency as that of bare, hydroxyl-passivated ZnO NCs. These results indicate that the "rigid shell" model fails and the PEG ligand shell morphology is more likely porous or in a patchy "mushroom state", consistent with transmission electron microscopy data. While the spectroscopic measurements and data analysis procedures discussed herein cannot directly visualize the ligand shell morphology in real space, the in situ spectroscopy approach can provide researchers with valuable information regarding the permeability of species through the ligand shell under practical biological conditions.

Lanthanide‐FRET Molecular Beacons for microRNA Biosensing, Logic Operations, and Physical Unclonable Functions

AbstractTime‐resolved or time‐gated (TG) biosensing and bioimaging with luminescent lanthanide probes and Förster resonance energy transfer (FRET) have significantly advanced bioanalytical chemistry. However, the development of lanthanide‐based molecular beacons (MBs) has been rather limited. Here, we designed DNA stem‐loop MB probes against two different microRNAs (miR‐21 and miR‐27b) using Tb and Eu FRET donors and quenching (BHQ2) and fluorescent (Cy3) FRET acceptors. Limits of detection down to 190 pM and duplexed miR‐21/miR‐27b quantification at low nanomolar concentrations with Tb‐BHQ2 and Eu‐BHQ2 TG‐FRET MBs demonstrated the versatility and high analytical performance of lanthanide‐based MBs. The particular donor‐acceptor distances in the Tb‐Cy3 MB resulted in inverted nucleic acid target concentration‐dependent TG PL intensities in short (e. g., 0 to 40 μs) and long (e. g., 0.1 to 2.1 ms) TG detection windows after pulsed excitation. We showed that this specific feature of our TG‐FRET MBs can be adapted to the design of molecular logic devices (NOR, OR, NAND, AND, XNOR, XOR, IMPLEMENT, and INHIBIT). Moreover, the almost unlimited choice of TG detection windows and the distinct spectral features of Tb and Cy3 over a broad visible spectral range could be exploited to devise biophotonic physical unclonable functions for highly secure authentication and identification. Our study manifests the versatility of lanthanides for advanced biophotonic applications.

Quantitative Measurement of Drug Release Dynamics within Targeted Organelles Using Förster Resonance Energy Transfer.

Measuring the release dynamics of drug molecules after their delivery to the target organelle is critical to improve therapeutic efficacy and reduce side effects. However, it remains challenging to quantitatively monitor subcellular drug release in real time. To address the knowledge gap, a novel gemini fluorescent surfactant capable of forming mitochondria-targeted and redox-responsive nanocarriers is designed. A quantitative Förster resonance energy transfer (FRET) platform is fabricated using this mitochondria-anchored fluorescent nanocarrier as a FRET donor and fluorescent drugs as a FRET acceptor. The FRET platform enables real-time measurement of drug release from organelle-targeted nanocarriers. Moreover, the obtained drug release dynamics can evaluate the duration of drug release at the subcellular level, which established a new quantitative method for organelle-targeted drug release. This quantitative FRET platform can compensate for the absent assessment of the targeted release performances of nanocarriers, offering in-depth understanding of the drug release behaviors at the subcellular targets.

Direct Measurement of Polymer-Chain-End-to-End Distances by Using RAFT Chain Transfer Agent as the FRET Acceptor.

Förster resonance energy transfer (FRET) is a powerful tool for measuring distances between two molecules (donor and acceptor) in close proximity (1-10 nm), which can be employed for determining polymer end-to-end distances (Ree). However, previous works for labeling FRET pairs on chain-ends often involve relatively complex steps for materials preparation, potentially limiting their broad use in synthetic polymer systems. In this work, we introduce an anthracene-functionalized chain-transfer agent for reversible addition-fragmentation chain-transfer (RAFT) polymerizations, which can directly yield polymers containing FRET donor and acceptor molecules on respective chain-ends. This approach enables the direct use of FRET for characterizing the averaged Ree of polymers. Building on this platform, we investigate the averaged Ree of polystyrene (PS) and poly(methyl methacrylate) (PMMA) in a good solvent as a function of their molecular weight. Notably, the FRET results show good agreement with simulation results obtained from all-atom molecular dynamics, confirming its measurement accuracy. Overall, this work provides a facile and broadly applicable platform to directly determine the Ree of low molecular weight polymers by using FRET-based methods.

Detecting RNA–Protein Interactions With EGFP‐Cy3 FRET by Acceptor Photobleaching

Förster Resonance Energy Transfer (FRET) is a great tool for cell biologists to investigate molecular interactions in live specimens. FRET is a distance-dependent phenomenon which can detect molecular interactions at distances between 1-10 nm. Several FRET approaches are reported in the literature for live and fixed cells to study protein-protein interactions; this protocol provides details of acceptor photobleaching as a FRET method to study RNA-Protein interactions. Cy3-labeled RNA foci (FRET acceptors) are photobleached at the intra-cellular site of interest (the nuclei) and the intensity of the EGFP-tagged proteins (FRET donors) at that same site are measured pre- and post- photobleaching. In principle, FRET is detected if the intensity of EGFP increases after photobleaching of Cy3. This protocol describes necessary steps and appropriate controls to conduct FRET measurements by the acceptor photobleaching method. Successful applications of this protocol will provide data to support the conclusion that EGFP-labeled proteins directly interact with Cy3-labeled RNA at the site of photobleaching. © 2023 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol: FRET in fixed cells Alternate Protocol: FRET in live cells.

Biosensor Optimization Using a Förster Resonance Energy Transfer Pair Based on mScarlet Red Fluorescent Protein and an mScarlet-Derived Green Fluorescent Protein.

Genetically encoded biosensors based on Förster resonance energy transfer (FRET) are indispensable tools for monitoring biochemical changes in cells. Green and red fluorescent protein-based FRET pairs offer advantages over the classically employed cyan and yellow fluorescent protein pairs, such as better spectral separation, lower phototoxicity, and less autofluorescence. Here, we describe the development of an mScarlet-derived green fluorescent protein (designated as mWatermelon) and its use as a FRET donor to the red fluorescent protein mScarlet-I as a FRET acceptor. We tested the functionality of this FRET pair by engineering biosensors for the detection of protease activity, Ca2+, and K+. Furthermore, we described a strategy to enhance the FRET efficiency of these biosensors by modulating the intramolecular association between mWatermelon and mScarlet-I.

Steric Barrier‐Steered Reaction Sites in Micellar Catalysis

AbstractIn the pursuit of an advanced micellar catalysis system, the reaction sites in micelles determine its catalytic performances. However, the intrinsic polarity gradient of micelles anchors the reactants in the fixed regions, leading to an unmet challenge to steer the reaction sites to the optimal ones. To overcome this limitation, a Förster resonance energy transfer (FRET) spectroscopic ruler is established to position the true sites of reactants in micellar catalysis by using tetraphenylethylene (TPE) in the aggregation‐induced emission (AIE) micelles as the FRET donor and Nile red as the FRET acceptor. Subsequently, the customizable TPE steric barriers in the AIE micelles are apt to mediate the reactants into the polar micellar surface, the semipolar palisade layer, or the nonpolar internal layer, achieving the corresponding catalytic efficiencies. Additionally, the universality of steric barrier‐steered reaction sites in micellar catalysis is further demonstrated by the simple incorporation of small nonpolar molecules into the commercially available surfactants. To the authors’ knowledge, this is the first report on the design of steric barriers to steer the reaction sites in micellar catalysis. These findings open up attractive perspectives for the exploration of new classes of efficient micellar catalysis systems in a variety of reactions.

Ruthenium(II) Polypyridyl Complexes as FRET Donors: Structure- and Sequence-Selective DNA-Binding and Anticancer Properties.

Ruthenium(II) polypyridyl complexes (RPCs) that emit from metal-to-ligand charge transfer (MLCT) states have been developed as DNA probes and are being examined as potential anticancer agents. Here, we report that MLCT-emissive RPCs that bind DNA undergo Förster resonance energy transfer (FRET) with Cy5.5-labeled DNA, forming mega-Stokes shift FRET pairs. Based on this discovery, we developed a simple and rapid FRET binding assay to examine DNA-binding interactions of RPCs with diverse photophysical properties, including non-"light switch" complexes [Ru(dppz)2(5,5'dmb)]2+ and [Ru(PIP)2(5,5'dmb)]2+ (dppz = dipyridophenazine, 5,5'dmb = 5,5'-dimethyl-2,2'-bipyridine, PIP = 2-phenyl-imidazo[4,5-f][1,10]phenanthroline). Binding affinities toward duplex, G-quadruplex, three-way junction, and mismatch DNA were determined, and derived FRET donor-acceptor proximities provide information on potential binding sites. Molecules characterized by this method demonstrate encouraging anticancer properties, including synergy with the PARP inhibitor Olaparib, and mechanistic studies indicate that [Ru(PIP)2(5,5'dmb)]2+ acts to block DNA replication fork progression.

Genetic Encoding of a Fluorescent Noncanonical Amino Acid as a FRET Donor for theAnalysis of Deubiquitinase Activities.

The genetic code expansion technology enables the genetic encoding of fluorescent noncanonical amino acids (ncAAs) for site-specific fluorescent labeling of proteins. These co-translational and internal fluorescent tags have been harnessed to establish genetically encoded Förster resonance energy transfer (FRET) probes for studying protein structural changes and interactions. Here, we describe the protocols for site-specific incorporation of an aminocoumarin-derived fluorescent ncAA into proteins in E. coli and preparation of a fluorescent ncAA-based FRET probe for assaying theactivities of deubiquitinases, a key class of enzymes involved in ubiquitination. We also describe the deployment of an in vitro fluorescence assay to screen and analyze small-molecule inhibitors against deubiquitinases.

Designs and Applications of Multi-stimuli Responsive FRET Processes in AIEgen-Functionalized and Bi-fluorophoric Supramolecular Materials

Materials capable of displaying strong ratiometric fluorescence with Förster resonance energy transfer (FRET) processes have attracted much research interest because of various chemosensor and biomedical applications. This review highlights several popular strategies in designing FRET-OFF/ON mechanisms of ratiometric fluorescence systems. In particular, the developments of organic and polymeric FRET materials featuring aggregation-induced emission-based luminogens (AIEgens), supramolecular assemblies, photochromic molecular switches and surfactant-induced AIE/FRET mechanisms are presented. AIEgens have been frequently employed as FRET donor and/or acceptor fluorophores to obtain enhanced ratiometric fluorescences in solution and solid states. Since AIE effects and FRET processes rely on controllable distances between fluorophores, many interesting fluorescent properties can be designed by regulating aggregation states in polymers and supramolecular systems. Photo-switchable fluorophores, such as spiropyran and diarylethene, provide drastic changes in fluorescence spectra upon photo-induced isomerizations, leading to photo-switching mechanisms to activate/deactivate FRET processes. Supramolecular assemblies offer versatile platforms to regulate responsive FRET processes effectively. In rotaxane structures, the donor-acceptor distance and FRET efficiency can be tuned by acid/base-controlled shuttling of the macrocycle component. The tunable supramolecular interactions are strongly influenced by external factors (such as pH values, temperatures, analytes, surfactants, UV-visible lights, etc.), which induce the assembly and disassembly of host-guest systems and thus their FRET-ON/FRET-OFF behavior. In addition, the changes in donor or acceptor fluorescence profiles upon detections of analytes can also sufficiently alter the FRET behavior and result in different ratiometric fluorescence outputs. The strategies and examples provided in this review offer the insights and toolkits for future FRET-based material developments.

Quantum Dot-Based Molecular Beacons for Quantitative Detection of Nucleic Acids with CRISPR/Cas(N) Nucleases.

Strategies utilizing the CRISPR/Cas nucleases Cas13 and Cas12 have shown great promise in the development of highly sensitive and rapid diagnostic assays for the detection of pathogenic nucleic acids. The most common approaches utilizing fluorophore-quencher molecular beacons require strand amplification strategies or highly sensitive optical setups to overcome the limitations of the readout. Here, we demonstrate a flexible strategy for assembling highly luminescent and colorimetric quantum dot-nucleic acid hairpin (QD-HP) molecular beacons for use in CRISPR/Cas diagnostics. This strategy utilizes a chimeric peptide-peptide nucleic acid (peptide-PNA) to conjugate fluorescently labeled DNA or RNA hairpins to ZnS-coated QDs. QDs are particularly promising alternatives for molecular beacons due to their greater brightness, strong UV absorbance with large emission offset, exceptional photostability, and potential for multiplexing due to their sharp emission peaks. Using Förster resonance energy transfer (FRET), we have developed ratiometric reporters capable of pM target detection (without nucleotide amplification) for both target DNA and RNA, and we further demonstrated their capabilities for multiplexing and camera-phone detection. The flexibility of this system is imparted by the dual functionality of the QD as both a FRET donor and a central nanoscaffold for arranging nucleic acids and fluorescent acceptors on its surface. This method also provides a generalized approach that could be applied for use in other CRISPR/Cas nuclease systems.

Insertion of circularly permuted cyan fluorescent protein into the ligand-binding domain of inositol 1,4,5-trisphosphate receptor for enhanced FRET upon binding of fluorescent ligand

Binding of fluorescent ligand (FL) to the cyan fluorescent protein (CFP)-coupled ligand-binding domain of the inositol 1,4,5-trisphosphate (IP3) receptor (CFP-LBP) produces fluorescence (Förster) resonance energy transfer (FRET). A competitive fluorescent ligand assay (CFLA), using the FRET signal from competition between FLs and IP3, can measure IP3 concentration. The FRET signal should be enhanced by attaching a FRET donor to an appropriate position. Herein, we inserted five different circularly permuted CFPs in the loop between the second and third α-helices to generate membrane-targeted fluorescent ligand-binding proteins (LBPs). Two such proteins, LBP-cpC157 and LBP-cpC173, localized at the plasma membrane, displayed FRET upon binding the high-affinity ligand fluorescent adenophostin A (F-ADA), and exhibited a decreased fluorescence emission ratio (480 nm / 535 nm) by 1.6- to 1.8-fold that of CFP-LBP. In addition, binding of a fluorescent low-affinity ligand (F-LL) also reduced the fluorescence ratio in a concentration-dependent manner, with EC50 values for LBP-cpC157 and LBP-cpC173 of 34.7 nM and 27.6 nM, respectively. These values are comparable to that with CFP-LBP (29.2 nM), indicating that insertion of cpC157 and cpC173 did not disrupt LBP structure and function. The effect of 100 nM F-LL on the decrease in fluorescence ratio was reversed upon addition of IP3, indicating binding competition between F-LL and IP3. We also constructed cytoplasmic fluorescent proteins cyLBP-cpC157 and cyLBP-cpC173, and bound them to DYK beads for imaging analyses. Application of F-ADA decreased the fluorescence ratio of the beads from the periphery to the center over 3 − 5 min. Application of F-LL also decreased the fluorescence ratio of cyLBP-cpC157 and cyLBP-cpC173 by 20−25%, and subsequent addition of IP3 recovered the fluorescence ratio in a concentration-dependent manner. The EC50 value and Hill coefficient obtained by curve fitting against the IP3-dependent recovery of fluorescence ratio can be used to estimate the IP3 concentration.

Carbon Nanostructure-Based DNA Sensor Used for Quickly Detecting Breast Cancer-Associated Genes

The early diagnosis of breast cancer highly relies on the detection of mutant DNA at low concentrations. Förster resonance energy transfer (FRET) quenching may offer a solution to quickly detect a small amount of single-strand DNA (ssDNA) through the combination of nanomaterials with special luminescence and unique structures of DNA double helix structure. Here, carbon quantum dots (CDs) modified with Capture ssDNA act as the FRET donor which interact with the two-dimensional fluorescence quencher, i.e., graphene oxide nanosheets (GO), to detect breast cancer-associated Target ssDNA at a low concentration. CDs bioconjugated with the designed Capture ssDNA (named CDs-Capture ssDNA) have the maximum fluorescence intensity (Imax) at the emission (λem) = 510 nm. The fluorescence of CDs-Capture ssDNA is quenched, while they interact with GO due to the π–π* interaction between ssDNA and GO. In the presence of Target ssDNA, the Imax is restored because of the stronger interaction between Target ssDNA and CDs-Capture ssDNA through the hydrogen bond. The restored fluorescence intensity of CDs has a linear relationship with the concentration of Target ssDNA from 0.25 to 2.5 μM with a detection limit around 0.24 μM. The selectivity of the sensing system has been further evaluated by testing the 3-base mismatched and non-base matched in which efficient restoration of photoluminescence of the sensing system cannot be observed. This carbon nanostructure-based DNA sensing system offers a user-friendly and quick detection of single-strand DNA at lower concentration.

Multiple Docking of Fluorescent Dyes to Fibrillar Insulin

The co-localization of the donor and acceptor fluorophores capable of transferring the energy by the Fӧrster mechanism, on the molecular scaffold of amyloid fibrils offers new opportunities not only for refinement of the amyloid detection and structural analysis, but also for designing photonic nanodevices on their basis. The assembly of these systems involves the non-covalent dye-protein interactions which can hardly be characterized in terms of a precise dye location within the fibril structure that is required for fabricating the FRET-based light harvesting systems or photonic nanowires. In view of this, the dye-fibril binding process deserves a detailed in silico study. In the previous molecular docking studies of the FRET donors and acceptors interacting with the insulin model fibrils we considered only one ligand during the simulation procedure. However, the real situation is much more complicated, when the multiple ligands can compete for the same binding site, a direct complexation between the dyes on the fibril scaffold can take place, the spatial distribution of the bound fluorophores can be unfavorable for the energy transfer, etc. In addition, the mutual orientation of the donor and acceptor molecules essentially contribute to the efficiency of the Förster resonance energy transfer (FRET) in the investigated systems. The present study was undertaken to gain molecular docking insight into the binding of the donor (Thioflavin T) and acceptor (Congo Red or a phosphonium dye TDV) fluorophores to the insulin amyloid fibrils using the multiple docking approach. The employed PatcDock and SwissDock webserves provided evidence for the preferable association of all dyes with the fibril grooves. The protein-ligand interaction profiler (PLIP) was employed for analyzing the (InsF + ThT +CR) and (InsF + ThT + TDV) systems. The revealed binding modes and the types of the dye-fibril interactions may be of importance for a more detailed analysis of the FRET process in amyloid systems and may serve as a background for further in silico studies of the cascade FRET on the amyloid fibril scaffold.

Construction of Self-Assembling Lipopeptide-Based Benign Nanovesicles to Prevent Amyloid Fibril Formation and Reduce Cytotoxicity of GxxxGxxxGxxxG Motif.

Alzheimer's disease, a progressive severe neurodegenerative disorder, has been until now incurable, in spite of serious efforts worldwide. We have designed self-assembled myristoyl-KPGPK lipopeptide-based biocompatible nanovesicles, which can inhibit amyloid fibrillation made by the transmembrane GxxxGxxxGxxxG motif of Aβ-protein and human myelin protein zero as well as reduce their neurotoxicity. Various spectroscopic and microscopic investigations illuminate that the lipopeptide-based nanovesicles dramatically inhibit random coil-to-β-sheet transformation of Aβ25-37 and human myelin protein zero protein precursor, which is the prerequisite of GxxxGxxxGxxxG motif-mediated fibril formation. Förster resonance energy transfer (FRET) assay using synthesized Cy-3 (FRET donor) and Cy-5 (FRET acceptor)-conjugated Aβ25-37 also exhibits that nanovesicles strongly inhibit the fibril formation of Aβ25-37. The mouse neuro-2a neuroblastoma cell line is used, which revealed the GxxxGxxxGxxxG-mediated cytotoxicity. However, the neurotoxicity has been diminished by co-incubating the GxxxGxxxGxxxG motif with the nanovesicles.

Engineering the Compositional Architecture of Core‐Shell Upconverting Lanthanide‐Doped Nanoparticles for Optimal Luminescent Donor in Resonance Energy Transfer: The Effects of Energy Migration and Storage

Förster Resonance Energy Transfer (FRET) between single molecule donor (D) and acceptor (A) is well understood from a fundamental perspective and is widely applied in biology, biotechnology, medical diagnostics, and bio-imaging. Lanthanide doped upconverting nanoparticles (UCNPs) have demonstrated their suitability as alternative donor species. Nevertheless, while they solve most disadvantageous features of organic donor molecules, such as photo-bleaching, spectral cross-excitation, and emission bleed-through, the fundamental understanding and practical realizations of bioassays with UCNP donors remain challenging. Among others, the interaction between many donor ions (in donor UCNP) and many acceptors anchored on the NP surface and the upconversion itself within UCNPs, complicate the decay-based analysis of D-A interaction. In this work, the assessment of designed virtual core-shell NP (VNP) models leads to the new designs of UCNPs, such as …@Er, Yb@Er, Yb@YbEr, which are experimentally evaluated as donor NPs and compared to the simulations. Moreover, the luminescence rise and decay kinetics in UCNP donors upon RET is discussed in newly proposed disparity measurements. The presented studies help to understand the role of energy-transfer and energy migration between lanthanide ion dopants and how the architecture of core-shell UCNPs affects their performance as FRET donors to organic acceptor dyes.

Single-pair measurements of FRET efficiency between quantum dots and organic dyes reveal orientational variation

Förster resonance energy transfer (FRET) is a spectroscopic technique that can be used to measure nanoscale distances and report on biomolecular dynamics at the single-molecule level. Organic dye FRET pairs are commonly used in biophysical studies, but this approach suffers from the fact that organic dyes have short photobleaching lifetimes. Quantum dots are much more photostable, and therefore might be useful as FRET donors in longer experiments. However, the energy transfer between quantum dots and organic dye molecule acceptors has not formerly been characterized at the single-molecule level.