Pore Formation Research Articles

Analysis of pore formation and carburizing mechanism of magnetite reduction by CO

To investigate the porosity and expansion mechanism of CO-reduced magnetite, the reduced microstructures of magnetite under conventional heating and microwave heating were compared. The microstructure characteristics of magnetite with various reduction degrees were examined in a 60%CO-Ar reduction atmosphere, and the formation and evolution mechanism of the structure were analyzed in conjunction with the reduction effect. The results indicate that the reduction product of CO reduced magnetite possesses a porous structure. Nevertheless, when the gas diffusion is restricted, the reduction process is sluggish and the porous structure is not readily formed. Microwave heating enhances the gas-phase diffusion capacity, thermodynamic carburizing capacity, and solid-phase carbon-oxygen diffusion capacity, resulting in a higher oxygen loss rate than that of conventional heating. Under the experimental conditions, the lattice shrinkage during the Fe3O4 → Fe0.88O transformation and the rapid expansion of Fe0.88O → Fe0.94O are the causes of the crack. Microwaves facilitate the formation of pores and cracks in the product. This study offers a novel concept for the development of foam steel.

Micro-CT Analysis of Pore Structure in Upland Red Soil Under Different Long-Term Fertilization Regimes

This study hypothesized that long-term fertilization alters the pore structure and aggregate stability in upland red soil. A long-term fertilization experiment in Qiyang, Hunan, was conducted with three treatments: no fertilization (CK), nitrogen–phosphorus–potassium fertilization (NPK), and nitrogen–phosphorus–potassium combined with pig manure (NPKOM). X-ray computed tomography (CT) scanning technology was used to assess three-dimensional pore structures at both the soil column (50 mm diameter and 50 mm height) and aggregate scales (diameter 3–5 mm), alongside the evaluation of the soil’s physical and chemical properties. Results showed that the soil organic carbon content (SOC) increased by 44.8% in NPK and 112.5% in NPKOM compared to CK. NPKOM improved the aggregate stability by 51.6%, whereas NPK had no significant effect. At the soil column scale, NPK increased the total porosity by 13.7% but reduced larger pores (>0.06 mm), whereas NPKOM decreased the total porosity by 7.8% and increased larger pores. At the aggregate scale, NPKOM increased the porosity for pores >0.098 mm by 7.6 times compared to CK and 9.5 times compared to NPK. In conclusion, long-term NPKOM significantly enhances the SOC and aggregate stability and promotes larger pore formation, unlike NPK, which mainly increases SOC but does not improve the soil structure.

Mechanistic Insight into the Anti-Bacterial/Anti-Biofilm Effects of Low Chlorhexidine Concentrations on Enterococcus faecalis—In Vitro Study

Background: Endodontic treatment failures are often linked to the persistence of Enterococcus faecalis in the root canal system. This study aimed to investigate the antibacterial/antibiofilm mechanism of chlorhexidine (CHX), particularly at low concentrations, against E. faecalis, to improve endodontic treatment protocols. Methods: The antibacterial activity of CHX (0.125–20 μg/mL) was evaluated against E. faecalis ATCC 29212 using various assays, including planktonic growth inhibition, colony-forming units (CFUs), membrane permeability and potential assays, high-resolution scanning electron microscopy (HR-SEM), confocal laser scanning microscopy of biofilms, biomass and metabolic activity assays on matured biofilm, and quantitative real-time PCR for gene expression. Statistical analysis was performed using Student’s t-test and ANOVA. Results: CHX demonstrated concentration-dependent inhibition of E. faecalis, significantly reducing planktonic growth and CFUs. Membrane assays showed increased permeability and depolarization, indicating damage. HR-SEM revealed morphological changes, such as pore formation, while confocal microscopy showed a reduction in biofilm mass and extracellular substances. Gene expression analysis indicated the downregulation of virulence genes and upregulation of stress response genes. Conclusions: CHX at low concentrations disrupts E. faecalis at multiple levels, from membrane disruption to gene expression modulation, affecting mature biofilm. These findings support the refinement of endodontic disinfection protocols to reduce microbial persistence.

Construction of a genome-editing system for the thermophilic actinomycete streptomyces thermodiastaticus K5 strain.

Thermophilic actinomycetes significantly contribute to the terrestrial carbon cycle via the rapid degradation of lignocellulosic polysaccharides in composts. In this study, a genome-editing system was constructed for the thermophilic actinomycetes Streptomyces thermodiastaticus K5 strain, which was isolated from compost. The genome-editing plasmid (pGEK5) harboring niccase Cas9 was derived from the high-copy plasmid pL99 and used for the K5 strain. It was found that pGEK5 could easily be lost from the transformed clone through cultivation on apramycin-free medium and spore formation, enabling its reuse for subsequent genome-editing cycles. With the aid of this plasmid, mutations were sequentially introduced to two uracil-DNA glycosylase genes (Udg1 and Udg2) and one β-glucosidase gene (Bgl1). Thus, the genome-editing system using pGEK5 enables us to start the functional modification of this thermophilic actinomycete, especially for improved conversion of lignocellulosic biomass.

Iron-Induced Lipid Oxidation Alters Membrane Mechanics Favoring Permeabilization.

Ferroptosis is a form of regulated necrosis characterized by the iron-dependent accumulation of lipid peroxides in cell membranes. However, how lipid oxidation via iron-mediated Fenton reactions affects the biophysical properties of cellular membranes and how these changes contribute to the opening of plasma membrane pores are major questions in the field. Here, we characterized the dynamics of membrane alterations during lipid oxidation induced onsite by Fenton reactions in chemically defined in vitro model membrane systems. We find that lipid vesicle permeabilization kinetically correlates with the appearance of malondialdehyde (MDA), a product of lipid oxidation. Iron-induced lipid oxidation also alters the lateral organization of supported lipid bilayers (SLBs) with lipid phase coexistence in a time-dependent manner, reducing the lipid phase mismatch and the circularity of liquid ordered domains, which indicates a decrease in line tension at the phase boundaries. Further analysis of oxidized SLBs by force spectroscopy reveals a significant decrease in the average membrane breakthrough force upon oxidation, resulting from changes in lipid bilayer organization that make it more susceptible to permeabilization. Our findings suggest that lipid oxidation via iron-mediated Fenton-like reactions induces strong changes in membrane lipid interactions and mechanical properties leading to reduced line tension in the permeabilized state of the bilayer, which promotes membrane pore formation.

The Formation of Porous Silicon Using Vertical Photoelectrochemical Method with Laser Energy Variation

Due to its notable characteristics, porous silicon (PSi) has become the main focus in silicon upgrades for optoelectronics, medical, and sensor applications. Here, successful vertical photoelectrochemical fabrication of PSi based on crystalline silicon n-type wafers with orientation (100) has been accomplished. Silicon surfaces were anodized for 10 min in a solution of hydrofluoric acid and ethanol at a ratio of 1:3 and a current density of 4 mA/cm2 under laser illumination. Illumination sources were red, green, and purple laser beams with energies of 1.91 eV, 2.33 eV, and 3.06 eV, respectively, conducted to observe the effects on PSi microstructures and optical properties. The pores formed on the silicon surface were characterized via SEM, XRD, FTIR, and UV-Vis DRS Spectrophotometer. SEM analysis showed pore size distributions of 2.130, 3.353, and 1.078 mm for PSi samples with red, green, and purple lasers, respectively. XRD investigation revealed diffraction angles of 33.14° and 69.47° belonging to (211) and (422) planes, respectively, corresponding to the PSi. For samples of silicon and PSi with red, green, and purple lasers, the crystallite size and crystallinity were 168.55 nm and 44.80%, 25.02 nm and 17.12%, 29.19 nm and 23.56%, and 145.05 nm and 35.17%, respectively. FTIR observation confirmed that the PSi surface contained chemical bonds of Si-Si, Si-H, Si-H2, Si-O-Si, and C=O. UV-Vis DRS examination revealed the reflectance spectrum oscillation, indicating that lasers caused pore formation in PSi with bandgap energies of between 1 and 2 eV.

Manufacturing Aluminum-Based Nanocomposites via Stir-Squeeze Casting Combined with Ultrasonication

This study successfully produced aluminum nanocomposites using a stir-squeeze casting process, both with and without ultrasonication (US) assistance. The matrix material utilized was scrap automobile wheel aluminum alloy (A356), with 1% SiC nano particles, averaging a size of 40 nm, serving as the reinforcement material. A comparison was made by also producing A356 aluminum casts with and without the use of US. The produced casts underwent thorough chemical and mechanical characterization, including optical and scanning microscopy, porosity measurement, hardness measurement, compression and tensile testing, as well as wear testing. Additionally, energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) analyses were conducted to assess compositions and confirm the presence of SiC nano particles in the aluminum matrix. Porosity levels were slightly higher in the nanocomposite samples compared to pure matrix samples, attributed to the tendency of pore formation due to improper distribution of ceramic particles, resulting in clustering and agglomeration. However, significant reduction in porosity was observed with the application of ultrasonication, effectively breaking up clusters and agglomerations of reinforcement particles. Regarding mechanical properties, the A356+SiC sample with US exhibited the highest hardness (70.8 HRB), tensile strength (163.25 MPa), and compressive strength (387.2 MPa), along with the lowest abrasive wear loss (0.0017 g) among all types of casts produced in this study.

Mechanisms of lipid-mediated regulation of the pore-forming activity of antimicrobial agents: studies on planar lipid bilayers

Planar lipid bilayers are unique tools designed for modeling cell membranes and electrophysiological studies of incorporated ion channels. Such model systems are designed to limit the number of components taking part in the functioning of biological membranes in order to characterize in detail the occurring processes under well-controlled experimental conditions. Planar lipid bilayers make it possible to record single events with a measured current of more than a tenth of a picoampere. The relative simplicity of the method, the ability to observe single molecular events, and the high reproducibility of the results obtained determines the unprecedented effectiveness of using planar lipid bilayers to identify key physical and chemical factors responsible for regulating the functioning of ion channels. This review represents an analysis of literature data concerning the mechanisms of lipid-associated regulation of ion channels formed by various antimicrobial agents. The examination allows us to consider the lipids as molecular chaperones that ensure the formation of pores in target membranes by antimicrobials.

Pore formation and evolution mechanisms during hydrocarbon generation in organic-rich marl

Marine organic-rich marl is not only a high-quality hydrocarbon source of conventional oil and gas, but also a new type and field of unconventional oil and gas exploration. An understanding of its pore structure evolution characteristics during a hydrocarbon generation process is theoretically significant and has application prospects for the exploration and development of this special type of natural gas reservoirs. This study conducted thermal simulation of hydrocarbon generation under near-geological conditions during a whole process for cylinder samples of low mature marine organic-rich marl in the Middle Devonian of Luquan, Yunnan Province, China. During this process, hydrocarbon products at different evolution stages were quantified and corresponding geochemical properties were analyzed. Simultaneously, field emission scanning electron microscopy (FE-SEM) and low-pressure gas adsorption (CO2, N2) tests were applied to the corresponding cylinder residue samples to reveal the mechanisms of different types of pore formation and evolution, and clarify the dynamic evolution processes of their pore systems. The results show that with an increase in temperature and pressure, the total oil yield peaks at an equivalent vitrinite reflectance (VRo) of 1.03% and is at the maximum retention stage of liquid hydrocarbons, which are 367.51 mg/g TOC and 211.67 mg/g TOC, respectively. The hydrocarbon gas yield increases continuously with an increase in maturity. The high retained oil rate at the peak of oil generation provides an abundant material basis for gas formation at high maturity and over-maturity stage. The lower limit of VRo for organic matter (OM) pore mass development is about 1.6%, and bitumen pores, organic-clay complex pores together with intergranular pores, grain edge seams and dissolution pores constitute a complicated pore-seam-network system, which is the main reservoir space for unconventional carbonate gas. Pore formation and evolution are controlled synergistically by hydrocarbon generation, diagenesis and organic-inorganic interactions, and the pattern of pore structure evolution can be divided into four stages. A pore volume (PV) and a specific surface area (SSA) are at their highest values within the maturity range of 1.9% to 2.5%, which is conducive to exploring unconventional natural gas.

Two pairs of back-to-back α-helices of Kingella kingae RtxA toxin are crucial for the formation of a membrane pore.

The RtxA cytotoxin, a member of the RTX (Repeats in ToXin) family of pore-forming toxins, is the primary virulence factor of the paediatric facultative pathogen Kingella kingae. Although structure-function studies of RTX toxins have defined their characteristic domains and features, the exact membrane topology of RTX toxins remains unknown. Here, we used labelling of cell-bound RtxA with a membrane-impermeable, lysine-reactive reagent and subsequent detection of the labelled lysine residues by mass spectrometry, which revealed that most of the membrane-bound toxin is localised extracellularly. A trypsin protection assay with cell-bound RtxA demonstrated that five of seven transmembrane α-helices, predicted by various algorithms within the N-terminal half of the molecule, are irreversibly embedded in the membrane. Structure-function analysis showed that these α-helices, four of which are arranged as two pairs of back-to-back helices, are essential for the formation of an ion-conducting membrane pore. In contrast, the C-terminal half of RtxA is required for the interaction with the cell surface and for the irreversible insertion of the toxin into the membrane via acyl chains covalently linked to the molecule. These findings advance our understanding of the structure-function relationships of RtxA and enable us to propose a membrane topology model of the toxin.

Pore-forming aegerolysin and MACPF proteins in extremotolerant or extremophilic fungi.

Aegerolysin proteins are involved in various interactions by recognising a molecular receptor in the target organism. The formation of pores in combination with larger, non-aegerolysin-like protein partners (such as membrane attack complex/perforin proteins [MACPFs]) is one of the possible responses in the presumed competitive exclusion of other organisms from the ecological niche. Bicomponent pairs are already observed at the gene level. Fungi growing under extreme conditions can be divided into ubiquitous and extremotolerant generalists which can compete with mesophilic species and rare, isolated extremophilic and extremotolerant specialists with narrow ecological amplitude that cannot compete. Under extreme conditions, there are fewer competitors, so fungal specialists generally produce less diverse and complicated profiles of specialised molecules. Since extremotolerant and extremophilic fungi have evolved in numerous branches of the fungal tree of life and aegerolysins are unevenly distributed across fungal genomes, we investigated whether aegerolysins, together with their partner proteins, contribute to the extreme survival ecology of generalists and specialists. We compiled a list of 109 thermo-, psihro-, acido-, alkali-, halo-, metallo- and polyextremo-tolerant/-philic fungal species. Several challenges were identified that affected the outcome: renaming fungal species, defining extremotolerant/extremophilic traits, identifying extremotolerant/extremophilic traits as metadata in databases and linking fungal isolates to fungal genomes. The yield of genomes coding aegerolysins or MACPFs appears to be lower in extremotolerant/extremophilic fungi compared to all fungal genomes. No candidates for pore-forming gene pairs were identified in the genomes of extremophilic fungi. Aegerolysin and MACPFs partner pairs were identified in only two of 69 species with sequenced genomes, namely in the ubiquitous metallotolerant generalists Aspergillus niger and A. foetidus. These results support the hypothesised role of these pore-forming proteins in competitive exclusion.

Does short-span chemical oxidation induce more weathering than prolonged thermal aging on polypropylene microplastics? Its consequence during the interaction with cadmium

Weathering and degradation of plastics in the environment are evident in almost all conditions. However, the difference is the changes in the polymer properties, which varies with the aging mechanism, polymer type, and other prevailing environmental conditions. Aging is an essential factor that further determines the fate and transportation of smaller plastics. Apart from UV radiation for microplastics (MPs) aging, other mechanisms also play a crucial role in changing the physicochemical properties of polymers in natural environments. Other aging mechanisms, such as chemical and thermal oxidation, were used in this study. Also, thermally stable and chemical resistant polypropylene MP is used in this study to understand the oxidation mechanisms and to know the breakpoint where it becomes susceptible to the reactions. From the results, the aged MPs showed roughness, pore formation, and cracks on the surface; more specifically, PP MPs were more weathered during thermal oxidation, revealed in both physicochemical characterizations of MPs. However, the chemical oxidation reached almost half the aging of the thermal process within a short period. The additives in the PP MPs make it resistant to the treatment, where it takes time to break during the thermal treatment, which was contradictory with Fenton aging. Further, the adsorption study was conducted to determine its interaction with Cd2+ and which aged MPs adsorb more. It can be concluded that PP MPs are more vulnerable towards chemical aging within a short duration, but it takes time to stimulate weathering under increased temperature.

Membrane fusion by dengue virus: The first step

Flaviviruses include important human pathogens such as Dengue, Zika, West Nile, Yellow fever, Japanese encephalitis, and Tick-borne encephalitis viruses as well as some emerging viruses that affect millions of people worldwide. They fuse their membrane with the late endosomal one in a pH-dependent way and therefore the merging of the membranes is one of the main goals for obtaining new antivirals. The envelope E protein, a membrane fusion protein, is accountable for fusion and encompasses different domains involved in the fusion mechanism, including the fusion peptide segment. In this work we have used molecular dynamics to study the interaction of the distal end of domain II of the DENV envelope E protein with a membrane like the late endosomal membrane in order to observe the initiation of membrane fusion carried out by a number of trimers of the DENV envelope E protein interacting with a complex biomembrane and demonstrate its feasibility. Our results demonstrate the likelihood of membrane disorganization and pore formation by trimer complex organization, the amino acids responsible for such condition and the secondary structure arrangements needed for such fundamental process. At the same time, we define new targets of the envelope E protein sequence which could permit designing potent antiviral bioactive molecules.

Track trajectory, molten pool and defect characterization in NiTi single-track selective laser melting (SLM) experiments

In order to explore the law of selective laser melting (SLM) forming of Nitinol alloy, and obtain high quality additive manufacturing parameters of Nitinol alloy, a series of single-track SLM experiments on Nitinol alloy were conducted under different combined parameters of laser power and scanning speed. The effects of laser power, scanning speed and linear energy density on track forming, molten pool evolution and pore formation were systematically discussed by characterizing the track trajectory, molten pool morphology, dimensions and defects of the molten pool, and the ideal process parameters were obtained. The experimental results revealed that the average track width and width uniformity decreased with the increase of the scanning speed, the spheroidization phenomenon and height fluctuation became more pronounced, and the phenomena of necking, subsection and interruption increased significantly at the fixed laser power. Under the fixed scanning speed, the width, height and width uniformity of the molten track gradually increased with the increase of the laser power, and the phenomena of spheroidization, subsection and interruption gradually reduced. Moreover, the upper zone of the molten pool is shaped like an inverted bowl, and the lower zone is mainly divided into five categories, which are lack of fusion, shallow bowl shape, deep bowl shape, keyhole shape and deeper keyhole shape under different process parameters. The defects of the molten pool mainly include lack of fusion and trapped gas. An ideal molten pool without defects can be obtained under the parameter conditions of 100-150W laser power and 100-200mm/s spanning speed.

Experimental study on the static properties of bamboo fiber reinforced ultra-high performance concrete (UHPC)

Bamboo fiber, as a natural and sustainable material, offers low cost, high strength, and environmental benefits, showing significant potential in composite material reinforcement. This study investigates the effects of bamboo fiber on the static properties of ultra-high performance concrete (UHPC) through experimental research. Different fiber lengths (6 mm, 12 mm, 18 mm) and volume contents (0.5 %, 1.0 %, 1.5 %, 2.0 %) were examined for their impact on the workability, mechanical properties, and pore/void structure of UHPC. The results demonstrate that while bamboo fiber incorporation reduces workability, it significantly enhances compressive and flexural strengths. Specifically, a 21.9 % increase in compressive strength was achieved with 18 mm fibers at 1.0 % content, and a 40.5 % increase in flexural strength was observed with 18 mm fibers at 1.5 % content. Mercury intrusion porosimetry (MIP) and computed tomography (CT) revealed that longer fibers contribute to the formation of larger pores, affecting the void structure. Moreover, bamboo fibers degrade over time in alkaline environments, with a 5 % reduction in tensile strength after 28 days, but the crystallinity of the cellulose has increased. Based on the experimental results, 12 mm bamboo fibers at 1.0–1.5 % content provide the best balance of strength enhancement and workability, making them a promising reinforcement material for UHPC.

Identification of Albopleistophora grylli n. gen. n. sp. (Microsporidia) and its impact on crickets (Gryllus spp.) in food-and-feed culture systems

This study provides a comprehensive taxonomic description of a microsporidian parasite infecting crickets, Gryllus bimaculatus and G. assimilis. Our analysis includes gross pathology, histopathology, spore ultrastructure, parasite development cycle, single gene phylogenies, and phylogenomic comparisons. We introduce a new taxon, Albopleistophora grylli n. gen. n. sp., characterised by its unique developmental stages within a sporophorous vesicle, leading to the formation of mature spores measuring 5.7 × 2.8 µm. Although prevalent in commercial cricket cultures, this parasite seemed to have limited effects on cricket survival. Indeed, microsporidia exposure and density assays with the host G. bimaculatus, only revealed density as a significant factor affecting the crickets’ survival. Nevertheless, exposure showed significant effect on the crickets’ emergence time, where exposed crickets emerged as adults earlier than unexposed individuals. Moreover, exposure to the parasite increased the faeces production and weight gain in cricket males. However, neither exposure nor density significantly impacted the females’ fecundity. The absence of spores in non-exposed cricket groups suggested a horizontal transmission, highlighting the importance of controlled rearing practices to eliminate this microsporidium in control groups. The well-known anti-microsporidian drug ‘fumagillin’ was studied with a higher microsporidia dose of exposure to evaluate any improvement in cricket survival, without showing any significant differences between exposed and unexposed groups. Our findings underscore the nuanced dynamics of host-microsporidia interactions and emphasise the need for ecological context in understanding microsporidian impacts. Even if non-dangerous for its host, monitoring of this parasite seems crucial due to its potential zoonotic transmission by its close phylogenomic relation to human-infecting microsporidia species.

A multi-step kinetics study on Chang-7 shale pyrolysis: Impact of shale inherent minerals

Pyrolysis is a significant process for the in-situ conversion and aboveground retorting of oil shale. However, the impact of inherent minerals on shale pyrolysis is still unclear. This study analyzed the effect of different inherent minerals on pyrolysis of Chang-7 oil shale, which is noted for its low carbonate, high silicate, and high pyrite content, through an integrated evaluation of kinetic and thermodynamic parameters. The pyrolysis process, arranged from 350℃ to 600℃, was deconvoluted into three distinct processes—bitumen, kerogen, and pyrite pyrolysis—using the bi-Gaussian method. Thermodynamic results showed that pyrolysis was endothermic and non-spontaneous. Minerals significantly reduced the pyrolysis activation energy. The ratio of pyrolysis activation energies for shale to kerogen increased with the carbonate-to-silicate content ratio. Master plot analysis indicated that, mineral removal shifted the reaction model from the contraction geometry model (Rn) to the diffusion model (Dn). This transition in reaction model was due to the formation of pores from demineralization and organic decomposition, facilitating the diffusion of heat and activated molecules into the interior of particles, which has been confirmed by porosity determination. This work provides an in-depth understanding of the impact of inherent minerals on shale pyrolysis, which is conducive to the efficient development and utilization of oil shale resources.

Natural sucrose-assisted controllable porous PVDF-HFP films for self-powered tactile sensors with higher sensitivity

Incorporating porous structures into flexible piezoelectric materials has proven to be an effective strategy to enhance the output performance, but the fabrication processes are often intricate or environmentally harmful. In this study, natural sucrose with substantial hydroxyl groups was firstly introduced into polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) as a phase formation inducer, and subsequently removed by the dissolution of water as a pore formation agent, yielding a regular porous structure. Furthermore, porosity of the PVDF-HFP film could be simply modulated by adjusting the mass ratio of sucrose to PVDF-HFP. At low porosity levels, the dielectric constant of PVDF-HFP decreased with the increase of porosity, reaching the minimum at the critical threshold porosity of 38.8%. Owing to the increased β-phase content and the decreased dielectric constant, the sensitivity of the porous PVDF-HFP film based piezoelectric sensor was tripled to 117 mV/N, which held promise for detecting tactile and slip signals in mechanical arms.

Necroptosis as a consequence of photodynamic therapy in tumor cells.

Photodynamic therapy (PDT) is an alternative to cancer treatment, demonstrating selectivity and significant cytotoxicity on malignant tissues. Such therapy involves two nontoxic components: photosensitizer (PS) and non-ionizing radiation. In optimal dosage combinations, PDT causes cellular and tissue effects by oxygen-dependent processes, leading tumor cells to regulated cell death pathways. Regulated necrosis, called necroptosis, can be triggered by PDT and is characterized by caspase-8 inhibition and RIPK1, RIPK3, and MLKL activities, leading to plasma membrane pores formation with subsequent cellular content release into the extracellular space. For this review, studies accessed by PubMed describing the relation between necroptosis and PDT were summarized. The results showed that PDT can trigger necroptosis mechanisms in different tumor cells. Moreover, a mix of different cell death types can co-occur. It is also important to highlight that necroptosis triggered by PDT is related to damage-associated molecular patterns (DAMPs) release, involving immunogenic cell death and vaccination. The cell death response is directly related to the photosensitizer chemical characteristics, concentration, incubation time, cellular location, and irradiation parameters. The synergism among all cell death types is an excellent advantage for avowing tumor resistance mechanisms and developing new solutions.

The Effect of Process Parameters on the Pore Structure of Lotus-Type Porous Copper Fabricated via Continuous Casting

The pores in lotus-type porous copper are formed due to the difference in hydrogen solubility between the liquid and solid phases of copper. In a pressurized hydrogen atmosphere, hydrogen gas is released at the gas release and crystallization temperature, which is the melting point of copper. This study systematically analyzes the effects of process parameters, including hydrogen ratio, total pressure, and continuous casting speed, on the pore structure of lotus-type porous copper, with the aim of identifying the most critical process parameters for controlling pore diameter and density. Within the hydrogen ratio up to 50%, it was observed that as the hydrogen ratio increases, the pores tend to increase in porosity, and the pore diameter increases. As the hydrogen ratio increased from 25% to 50%, the pore diameter increased from 300 μm to 400 μm, while the pore density decreased from 3.3 N·mm−2 to 2.8 N·mm−2. As the total pressure increased, the pore diameter tended to decrease, and the pore density increased. Specifically, when the total pressure increased from 0.2 MPa to 0.4 MPa, the pore diameter decreased from 1100 μm to 400 μm, while the pore density increased significantly from 0.5 N·mm−2 to 2.8 N·mm−2. In addition, as the continuous casting speed increased, 30 to 90 mm·min−1, the pore diameter decreased from 850 μm to 400 μm, and the pore density increased from 0.7 N·mm−2 to 2.8. N·mm−2. Specifically, the increase in total pressure led to a decrease in Gibbs free energy and a reduction in the critical pore nucleation radius, which promoted pore formation and resulted in the creation of more, smaller pores. These results suggest that total pressure is the primary factor influencing both pore diameter and density in lotus-type porous copper.