Formation Of Fracture Networks Research Articles

Mechanism and Model Analysis of Ultralow-Temperature Fluid Fracturing in Low-Permeability Reservoir: Insights from Liquid Nitrogen Fracturing

Ultralow-temperature fluids (such as liquid nitrogen, liquid CO2) are novel waterless fracturing technologies designed for dry, water-sensitive reservoirs. Due to their ultralow temperatures, high compression ratios, strong frost heaving forces, and low viscosities, they offer a solution for enhancing the fracturing and permeability of low-permeability reservoirs. In this study, we focus on the combined effects of high-pressure fluid rock breaking, low-temperature freeze-thaw fracturing, and liquid-gas phase transformation expansion on coal-rock in low-permeability reservoirs during liquid nitrogen fracturing (LNF). We systematically analyze the factors that limit the LNF effectiveness, and we discuss the pore fracture process induced by low-temperature fracturing in coal-rock and its impact on the permeability. Based on this analysis, we propose a model and flow for fracturing low-permeability reservoirs with low-temperature fluids. The analysis suggests that the Leidenfrost effect and phase change after ultralow-temperature fluids enter the coal support the theoretical feasibility of high-pressure fluid rock breaking. The thermal impact and temperature exchange rate between the fluid and coal determine the temperature difference gradient, which directly affects the mismatch deformation and fracture development scale of different coal-rock structures. The low-temperature phase change coupling fracturing of ultralow-temperature fluids is the key to the formation of reservoir fracture networks. The coal-rock components, natural fissures, temperature difference gradients, and number of cycles are the key factors in low-temperature fracturing. In contrast to those in conventional hydraulic fracturing, the propagation and interaction of fractures under low-temperature conditions involve multifield coupling and synergistic temperature, fluid flow, fracture development, and stress distribution processes. The key factors determining the feasibility of the large-scale application of ultralow-temperature fluid fracturing in the future are the reconstruction of fracture networks and the enhancement of the permeability response in low-permeability reservoirs. Based on these considerations, we propose a model and process for LNF in low-permeability reservoirs. The research findings presented herein provide theoretical insights and practical guidance for understanding waterless fracturing mechanisms in deep reservoirs.

Experimental investigation on macroscopic fracture and microstructural evolution of granite under high-temperature steam action

This study conducted simulated experiments on the thermal fracturing of granite under non-uniform stress conditions using the method of injecting high-temperature and high-pressure steam. Additionally, a comprehensive investigation was carried out on the thermal fracturing characteristics of granite after steam treatment, as well as the distribution patterns of cracks. The results show that: Firstly, the process of fracturing granite using high-temperature and high-pressure steam as a medium can be divided into five stages. The threshold temperature for thermal fracturing of granite is 260 ℃, at which point a large number of cracks develop or form interconnected networks. Secondly, under high-temperature conditions, the tensile strength of granite is greatly reduced. The temperature at which brittle fracture occurs in granite during the experiment was found to be 427 ℃ at a steam pressure of 10.6 MPa. Thirdly, under the influence of high-temperature and high-pressure steam, granite not only generates primary cracks along the direction perpendicular to the minimum principal stress but also produces a certain number of secondary cracks in other directions. The crack propagation direction can be determined from the velocity and permeability distribution maps of fractured granite. Finally, the fracture surface of granite exhibits significant brittle characteristics. The fracture morphology mainly includes transgranular and intergranular fractures. In the experiment, the fracture surface also showed fragmented and fatigue-induced fracture features. The fractal dimension of micro-morphological features can be used to assess the extent of thermal fracturing at different locations on the fracture surface. Through macroscopic fracturing experiments and comprehensive analysis of theory, wave velocity, and micro-morphology, the study obtained relevant crack propagation patterns and the formation of cracks in different directions. This is of practical significance in the formation of interconnected spatial fracture networks, thereby helping to increase the thermal exchange surface area of artificial reservoirs and improve the efficiency of geothermal exploitation.

Simulation of Key Influencing Factors of Hydraulic Fracturing Fracture Propagation in a Shale Reservoir Based on the Displacement Discontinuity Method (DDM)

In the process of the large-scale hydraulic fracturing of a shale gas field in the Weiyuan area of Sichuan province, the quantitative description and evaluation of hydraulic fracture expansion morphology and the three-dimensional distribution law are the key points of evaluation of block fracturing transformation effect. Many scholars have used the finite element method, discrete element method, grid-free method and other numerical simulation methods to quantitatively characterize hydraulic fractures, but there are often the problems that the indoor physical simulation results are much different from the actual results and the accuracy of most quantitative studies is poor. Considering rock mechanics parameters and based on the displacement discontinuity method (DDM), a single-stage multi-cluster fracture propagation model of horizontal well was established. The effects of Young’s modulus, Poisson’s ratio, the in situ stress difference, the approximation angle, the perforation cluster number and the perforation spacing on the formation of complex fracture networks and on the geometrical parameters of hydraulic fractures were simulated. The research results can provide theoretical reference and practical guidance for the optimization of large-scale fracturing parameters and the quantitative post-fracturing evaluation of horizontal wells in unconventional reservoirs such as shale gas reservoirs.

Analysis of Fracture Network Formation Mechanisms and Main Controlling Factors of Methane Explosion Fracturing in Deep Shale Reservoir

Analysis of Fracture Network Formation Mechanisms and Main Controlling Factors of Methane Explosion Fracturing in Deep Shale Reservoir

Characterization and Quantitative Assessment of Shale Fracture Characteristics and Fracability Based on a Three-Dimensional Digital Core

At present, assessment techniques for the fracability of shale reservoirs, which rely on the formation of an effective fracture network, are scarce. Hence, in order to assess the fracability, it is critical to establish a quantitative correlation between the pattern of fracture distribution after fracture and fracability. The present investigation utilizes three-dimensional digital core technology and triaxial compression experiments to simulate the fracturing process in typical domestic shale reservoir cores. In addition to utilizing the maximum ball algorithm to extract fracture images, a number of other techniques are employed to compute the spatial quantitative parameters of the fractures, including least squares fitting, image tracking algorithms, and three-dimensional image topology algorithms. The introduction of the notion of three-dimensional fracture complexity serves to delineate the degree of successful fracture network formation subsequent to fracturing. A quantitative fracability characterization model is developed by integrating the constraints of fracture network formation potential and fragmentation potential. The results of this study show that the quantitative characterization of the characteristic parameters of cracks can be achieved by establishing a method for extracting crack information as well as parameters after core compression and completing the construction of a three-dimensional complexity characterization model. Meanwhile, the three-dimensional post-compression fracture image validation shows that the core fracturability index can better reflect the actual fracturing situation, which is in line with the microseismic monitoring results, and significantly improves the accuracy of fracturability characterization, which is an important guideline for the fracturing design of shale gas reservoirs.

Anisotropic Mechanical Behaviors of Shale Rock and Their Relation to Hydraulic Fracturing in a Shale Reservoir: A Review

Shale gas is an important supplement to the supply of natural gas resources and plays an important role on the world’s energy stage. The efficient implementation of hydraulic fracturing is the key issue in the exploration and exploitation of shale gas. The existence of bedding structure results in a distinct anisotropy of shale rock formation. The anisotropic behaviors of shale rock have important impacts on wellbore stability, hydraulic fracture propagation, and the formation of complex fracture networks. This paper briefly reviews previous work on the anisotropic mechanical properties of shale rock and their relation to hydraulic fracturing in shale reservoirs. In this paper, the research status of work addressing the lithological characteristics of shale rock is summarized first, particularly work considering the mineral constituent, which determines its physical and mechanical behavior in essence. Then the anisotropic physical and mechanical properties of shale specimens, including ultrasonic anisotropy, mechanical behavior under uniaxial and triaxial compression tests, and tensile property under the Brazilian test, are summarized, and the state of the literature on fracture toughness anisotropy is discussed. The concerns of anisotropic mechanical behavior under laboratory tests are emphasized in this paper, particularly the evaluation of shale brittleness based on mechanical characteristics, which is discussed in detail. Finally, further concerns such as the effects of bedding plane on hydraulic fracturing failure strength, crack propagation, and failure pattern are also drawn out. This review study will provide a better understanding of current research findings on the anisotropic mechanical properties of shale rock, which can provide insight into the shale anisotropy related to the fracture propagation of hydraulic fracturing in shale reservoirs.

Thermally-induced cracking behaviors of coal reservoirs subjected to cryogenic liquid nitrogen shock

The benefits of using cryogenic liquid nitrogen shock to enhance coal permeability have been confirmed from experimental perspectives. In this paper, we develop a fully coupled thermo-elastic model in combination with the strain-based isotropic damage theory to uncover the cooling-dominated cracking behaviors through three typical cases, i.e. coal reservoirs containing a wellbore, a primary fracture, and a natural fracture network, respectively. The progressive cracking processes, from thermal fracture initiation, propagation or cessation, deflection, bifurcation to multi-fracture interactions, can be well captured by the numerical model. It is observed that two hierarchical levels of thermal fractures are formed, in which the number of shorter thermal fractures consistently exceeds that of the longer ones. The effects of coal properties related to thermal stress levels and thermal diffusivity on the fracture morphology are quantified by the fracture fractal dimension and the statistical fracture number. The induced fracture morphology is most sensitive to changes in the elastic modulus and thermal expansion coefficient, both of which dominate the complexity of the fracture networks. Coal reservoir candidates with preferred thermal-mechanical properties are also recommended for improving the stimulation effect. Further findings are that there exists a critical injection temperature and a critical in-situ stress difference, above which no thermal fractures would be formed. Preexisting natural fractures with higher density and preferred orientations are also essential for the formation of complex fracture networks. The obtained results can provide some theoretical support for cryogenic fracturing design in coal reservoirs.

Characterization of the Fine-Scale Evolution of Damage in Shale under the Influence of Two-Way Stress Differences Based on CT Images and Fractal Theory—The Example of the Anba Dyke in the Wufeng–Longmaxi Formation

To better understand the influence of different levels of two-way stress differences on the development of damage in Anchang diametral laminar shale in the northern Qianbei area, a numerical model of laminar shale with a representative fine-scale structure was established by using RFPA3D-CT. A triaxial compression test was conducted; a three-dimensional mesoscale fracture box dimension algorithm based on digital images was generated by using MATLAB R2020b; and the fractal characteristics were quantitatively analyzed. The results showed that under the influence of the horizontal stress ratio and two-way stress, the greater the two-way stress is, the more notable the plastic characteristics of specimen damage are, and the higher the residual strength is. The specimens with lower two-way stress exhibited obvious brittle damage characteristics. The difficulty degree of complex fracture network formation increased with the increase in the horizontal tension ratio, and the degree of increase in the fracture network complexity gradually decreased. At a horizontal stress ratio of 1.25, the fractal dimension was the highest, which indicates that the cracks were the most pronounced. Fracture formation after specimen damage was the most common phenomenon. Under the condition of a lower horizontal stress ratio, a large number of fracture structures could be generated in shale specimens after damage, promoting the expansion of natural fractures.

Study of stress field induced by natural fracture and its influence on hydraulic fracture propagation

The change of fracture propagation direction caused by stress interference between fractures is one of the main reasons that affect shale gas productivity. Natural fractures will be damaged by the induced stress, and the induced stress field produced by natural fracture damage will in turn affect the propagation of hydraulic fractures. Previous studies usually ignored the impact of stress field variation caused by natural fracture damage, leading to inaccurate fracture propagation simulation results. A new model for simulating hydraulic fracturing-induced stress field is established with consideration of the influence of natural fracture damage. Then, the natural fracture-induced stress is analyzed in open and closed fracture states. Through superposition of stress fields of natural fractures and hydraulic fractures, the interaction among open and closed natural fractures, reservoir and hydraulic fracture, and the corresponding fracture property evolution are studied. The results demonstrate that induced stress is not affected by elastic modulus and Poisson's ratio of the rock. The induced stress difference at the fracture tip is proportional to the net pressure and the length of hydraulic fractures. The results provide guidance for the optimal design of fracturing. When the deflection angle of hydraulic fracture is less than 90°, the maximum induced stress difference at the fracture tip decreases with the reduction in the deflection angle. When the deflection angle of hydraulic fracture is smaller than 90° or the deflection angle of natural fracture is smaller than 45°, the steering of hydraulic fracture is less hindered, which is beneficial to the formation of complex fracture network.

An Optimal Model for Determination Shut-In Time Post-Hydraulic Fracturing of Shale Gas Wells: Model, Validation, and Application

The global shale gas resources are huge and have good development prospects, but shale is mainly composed of nanoscale pores, which have the characteristics of low porosity and low permeability. Horizontal drilling and volume fracturing techniques have become the effective means for developing the shale reservoirs. However, a large amount of mining data indicate that the fracturing fluid trapped in the reservoir will inevitably cause hydration interaction between water and rock. On the one hand, the intrusion of fracturing fluid into the formation causes cracks to expand, which is conducive to the formation of complex fracture networks; on the other hand, the intrusion of fracturing fluid into the formation causes the volume expansion of clay minerals, resulting in liquid-phase trap damage. At present, the determination of well closure time is mainly based on experience without theoretical guidance. Therefore, how to effectively play the positive role of shale hydration while minimizing its negative effects is the key to optimizing the well closure time after fracturing. This paper first analyzes the shale pore characteristics of organic pores, clay pores, and brittle mineral pores, and the multi-pore self-absorption model of shale is established. Then, combined with the distribution characteristics of shale hydraulic fracturing fluid in the reservoir, the calculation model of backflow rate and shut-in time is established. Finally, the model is validated and applied with an experiment and example well. The research results show that the self-imbibition rate increases with the increase in self-imbibition time, and the flowback rate decreases with the increase in self-imbibition time. The self-imbibition of slick water is the maximum, the self-imbibition of breaking fluid is the minimum, and the self-imbibition of mixed fluid is the middle, and the backflow rates of these three liquids are in reverse order. It is recommended the shut-in time of Longmaxi Formation shale is 17 days according to the hydration and infiltration model.

Study on the interaction between hydraulic fracture and natural fracture under high stress

The existence of natural fractures in the reservoir has a great influence on the formation of complex fracture network, but the interaction between hydraulic fractures and natural fractures under high stress was rarely studied. Through laboratory tests, the law and characteristics of the interaction between hydraulic fractures and natural fractures under high stress were studied from the aspects of natural fractures angle, size, quantity, production method and ground stress in this study. Based on these interaction characteristics, a complex fracture network formation method of deep reservoir was proposed, which provided reference for engineering practice. The criterion of interaction between hydraulic fracture and natural fracture was improved, and the calculation method of rock tensile strength in three-dimensional state was proposed, which was applied to the criterion of fracture opening and fracture expansion. Combined with laboratory tests, a special interaction mode of hydraulic fracture passing through a certain position from the direction to end A (F-Type crossing mode) under high stress was proposed, and the criterion of this interaction mode were obtained. The three-dimensional finite discrete element model (FDEM) was used to investigate the effects of natural fracture strength and fracturing fluid viscosity on hydraulic fracture propagation under high stress. The results showed that the natural crack strength has great influence on the width, volume and shape of hydraulic crack. Small difference of fracturing fluid viscosity has little influence on fracture propagation, but high viscosity fracturing fluid has a greater influence on fracture propagation. This study provided reference for hydraulic fracturing engineering.

Research on the impact of pre‐existing geological fractures on hydraulic fracturing in high in situ stress environments

AbstractThe formation of complex fracture network is a difficult problem in the process of deep rock reservoir reconstruction, and the key to the generation of intricate fracture systems in deep reservoirs is to communicate more pre‐existing fractures through hydraulic fracturing, so as to enhance oil recovery. At present, there are few studies on the interactions of hydraulic fractures with pre‐existing fractures under high stress. Therefore, this research studied the influence of the number of pre‐existing fractures on the characteristics of hydraulic fractures by using advanced hydraulic fracturing instruments, and then analyzed the characteristics of hydraulic fractures under different pre‐existing fracture number based on three‐dimensional topography scanning technology and three‐dimensional square box fractal dimension calculation method. Based on the three‐dimensional finite element discrete element method, further research is carried out. The laboratory test findings indicated that the increase of pre‐existing fractures will make the pump pressure curve more stable during the test, and will significantly improve the roughness of hydraulic fractures. The numerical simulation indicated that as the quantity of pre‐existing fractures grows, the fracture area and width also increase, and in instances of a substantial quantity of pre‐existing fractures, the hydraulic fractures are prone to bifurcation, which contributes to the development of intricate fracture networks. With the increase of natural fracture angle, the fracture width decreased, but the fracture area increased. In this study, the influence of the number of pre‐existing fractures on hydraulic fracturing was studied through laboratory tests and numerical simulations, which provided theoretical reference for engineering practice.

Research on the Influence of Shale Reservoir Depth on Fracture Characteristics Based on Xsite

The exploration and development of shale reservoir is faced with both opportunities and challenges, especially the mechanism of influence of shale reservoir depth on hydraulic fracture characteristics is unclear. In this paper, by means of Xsite simulation, four stress levels are set to reflect the depth change from the side, and the influence of depth change on the hydraulic fracture characteristics of shale reservoir is studied. The results reveal a phenomenon: in the low stress environment, the fracture network can be effectively constructed, showing a more spacious space structure; In high-stress environments, the propagation direction of hydraulic fractures is precisely controlled, and these fractures can communicate more closely with the bedding surface. It is worth noting that in the low stress environment, the tensile fracture has a large area and forms a broad fracture network. In contrast, in high-stress environments, shear fractures dominate and their area increases significantly. In addition, the fracture volume is larger under low stress environment, while the total fracture area is more significant under high stress environment. This discovery has far-reaching significance for the formation of complex fracture networks in shale reservoirs, emphasizes the importance of making full use of shale multilayer characteristics, and provides rich and profound theoretical guidance for engineering practice.

Prediction criterion and numerical validation for the interaction between hydraulic fractures and bedding planes.

Shale is a kind of sedimentary rock with an obvious bedding structure. The effect of the bedding plane on hydraulic fracture initiation, propagation, and complex fracture network formation is remarkable and a major problem in hydraulic fracturing and shale oil and gas development. In this study, a criterion is established to predict the evolution behavior of hydraulic fractures (HF) under different confining pressure differences and intersection angles. This criterion is intended to predict the types of interaction between HFs and bedding planes (BPs): penetrating, slipping, or dilating. The dependence of crossing on the intersection angle and the principal stress difference is quantitatively presented using the criterion. Meanwhile, 20 simulations with principal stress differences of 2, 4, 6, and 8 MPa and intersection angles of 30°, 45°, 60°, 75°, and 90° were simulated using the RFPA2D-Flow code. Simulation results exhibit good agreement with the criterion results for a wide range of angles. The investigation showed that HFs tend to penetrate BPs under high confining pressure differences and intersection angles and open BPs under low confining pressure differences and intersection angles. In addition to the above two forms, HFs slip due to shear. The criterion can provide relevant reference about the formation of complex fracture networks in shale layers.

Evaluation of matrix energization effect of pre-fracturing method in tight reservoirs- A comparative study of CO2, N2, and water

The exacerbation of the greenhouse effect has created an urgent global demand for large-scale utilization of CO2, making it a significant concern for industries worldwide. During the fracturing process, CO2 possesses unique properties that enable the formation of intricate fracture networks, presenting promising applications. However, the potential of CO2 as a medium for enhancing recovery through fracturing remains largely unexplored. This paper highlights the priority of using CO2 as an energized fluid by comparing the pressure and oil recovery performance with N2 and water. Initially, CO2-oil swelling tests were conducted to assess the impact of CO2 injection on the physical properties of crude oil. Subsequently, the matrix energization performance of the three fracturing fluids was analyzed from two perspectives: pressure augmentation and pressure maintenance. The Online Nuclear Magnetic Resonance (NMR) method is proposed to further evaluate the oil replacement performance of fracturing fluids. The experiment results suggest that nitrogen is more effective in raising reservoir pressure, hydraulic fracturing exhibits superior formation energy maintenance, and CO2 demonstrates favorable performance in both aspects. Meanwhile, CO2 remains capable of recovering the largest amount of oil, with a recovery of up to 10.19%, and the oil recovery for nitrogen and water is 9.39% and 6.37%, respectively. Finally, a field-scale numerical model was developed to evaluate the matrix energization performance and oil recovery efficiency. In contrast to water and nitrogen, CO2 exhibits a heightened capacity for oil recovery. However, this advantage is proved to be constrained when the injection volume of CO2 is limited. CO2 can fully leverage its benefits when a substantial injection volume is employed, and reasonable optimization of CO2 injection amount can maximize the benefits.

Understanding the spatio-temporal evolution of fractures in pillow basalt

We investigated the origin and spatio-temporal evolution of cooling fractures in pillow basalt which undergo thermal contraction after their eruption in an aqueous environment. Through a computer-based simulation using Fourier transformation, the thermo elastic stress displacement profiles within individual pillow units are determined. The scaled model (pillow diameter - 1 meter) generated radial, linear fractures perpendicular to pillow margin and irregular discrete flaws in the pillow interior like the ones observed in natural examples. Radial linear fractures of 3–5 centimetre in length have been measured in pillows of average one-metre diameter from the Maradihalli region, in the Chitradurga Schist Belt, India. An estimated time of 94–118 minutes was required to get radial fractures of similar length in the simulation. Our model efficiently replicated the generation and distribution of thermal fractures and allowed an estimation of cooling time for the peripheral glassy zone but has limitations in deciphering the formation of fracture networks in progressively crystalline inner zone of pillows.

Investigation of Natural Weak Interface Properties and Their Impact on Fracture Propagation in Shale Reservoirs

Horizontal well multi-cluster fracturing technology is crucial for the economic development of fractured shale reservoirs. The abundance of natural fractures in shale reservoirs significantly influences the propagation path of hydraulic fractures and determines the formation of complex fracture networks. To investigate the impact of natural weak planes on the geometric parameters of fractures in shale reservoirs, we first conducted tests on the mechanical characteristics of core samples from outcropping shale in the Weiyuan area using the indoor three-point bending method and digital image correlation (DIC) technology, providing data validation for subsequent numerical models. Secondly, considering the interaction between hydraulic and natural weak planes in three-dimensional space, we established a three-dimensional numerical model for horizontal well fracturing to simulate the synchronous competition and expansion of fractures in multi-cluster fracturing. Based on this foundation, we analyzed the influence of formation parameters and engineering parameters on the formation patterns of complex fracture networks. The results indicate that the difference in in situ stress is a significant factor affecting the selection of fracture propagation paths. As the in situ stress difference increases, it becomes more challenging to open natural fractures, leading to a reduced probability of activation of natural weak interfaces. When the cohesive strength of natural fractures is smaller, they are more likely to open and capture hydraulic fractures, thereby increasing shear slip length and fracture network area. Each fracturing stage has an optimal perforation density combination, where a higher density of perforations leads to reduced perforation pressure drop and weaker ability to mitigate inter-cluster stress interference. To achieve a comprehensive and balanced development of multi-clusters, the inter-cluster stress interference can be alleviated by increasing the perforation pressure drop. For dense perforation clusters, higher injection rates and viscosity can be employed to ensure the uniform development of multiple perforation clusters. This study provides new insights into predicting the formation of complex fracture networks in shale reservoirs and offers valuable guidance for optimizing hydraulic fracturing designs.

A method for predicting the probability of formation of complex hydraulic fracture networks in shale reservoirs: development and application

A method for predicting the probability of formation of complex hydraulic fracture networks in shale reservoirs: development and application

Comparison of mechanical characteristics of different types of shales in the Ordos Basin

Shale gas is a very important unconventional energy. The mechanical properties of the three types of shale (laminated shale, sandwich shale and foliated shale) are different, and the difference in fracturing effectiveness is very significant. In this paper, the mineral composition, mechanical properties and conductivity of these three different types of shale were studied and compared by X-ray diffraction, triaxial mechanical experiments, and fracture conduction experiments. The study found that the foliated shale has the lowest content of rigid minerals (47.5%), lower elastic modulus and tensile strength (26.98 Gpa and 168.29 MPa, respectively), higher Poisson’s ratio (0.25), the smallest brittleness index (0.48), and larger fracture toughness (0.42). The laminated shale has a higher content of rigid minerals (68.50%), the lowest elastic modulus and tensile strength (25.77 Gpa and 122.46 MPa, respectively), the highest Poisson’s ratio (0.26), the highest brittleness index (0.56), and the lowest fracture toughness (0.18). The sandwich shale has the highest rigid mineral content (78.16%), the highest elastic modulus and tensile strength (35.31 Gpa and 197.37 MPa, respectively), the lowest Poisson’s ratio (0.24), a larger brittleness index (0.52), and larger fracture toughness (0.415). Furthermore, with the increase in the coring angle, the elastic modulus of all three shales increases. In addition, with the increase in closing pressure and the decrease in the sand laying concentration, the proppant embedding depth gradually increases and the conductivity decreases. This means that from the perspective of forming complex fracture networks, the fracturing effect of the foliated shale is unsatisfactory, while the fracturing effect of the laminated and sandwich shales is better. Moreover, it is recommended to prefer directional injection along vertical laminae or at high angles, which is conducive to the formation of complex fracture networks. For laminated shale with low strength, the sand laying concentration should be increased to ensure the conductivity of the fractured fracture. This study provides some technical guidance for the identification of different types of shale fracturing desserts and fracturing processes.

Fracture Propagation Mechanism of Tight Conglomerate Reservoirs in Mahu Sag

Conglomerate reservoirs are usually formed in sag slope belts, which have the characteristics of near-source rapid deposition, rapid sedimentary facies change, and distinct reservoir heterogeneity. Therefore, it is difficult to carry out treatments of stimulation because of insufficient understanding of the propagation mechanism of the unique “gravel-bypassing” and “gravel-penetrating” characteristics of fracture morphologies in Mahu conglomerate reservoirs. In order to study the law of hydraulic fracture propagation in conglomerate reservoirs, based on Brazilian splitting test results for conglomerates with different gravel particle sizes and different cementation degrees, true tri-axial fracturing experiments conducted in the laboratory were performed to conduct experimental research on natural conglomerate outcrops and analyze the effects of gravel size, fracturing fluid viscosity, and pumping rate on hydraulic fracture propagation morphology. The results show that: (1) the gravel cementation strength of fracture pressure is higher and the pressure drops preferably after fracturing. The fracture is more inclined to “pass through the gravel” to propagate in large-particle-size gravel. The poor gravel cementation of fracture pressure is relatively low-level and the pressure after fracture drops slightly, and fractures tend to occur at the margin of gravel; (2) using slick water for fracturing tends to initiate and propagate fractures at multiple points on the wellbore, which is conducive to the formation of complex fracture networks and the improvement of volume stimulation effects. Guanidine-gum fracturing has a higher fracture-forming efficiency and higher net pressure; and (3) a low pumping rate will increase the interaction degree between fractures and gravel, and gravels will cause a change in fracture roughness, resulting in small local fracture widths.