Forces In Single Point Incremental Forming Research Articles

Predicting maximum force in SPIF for different materials

Knowing the importance of predicting acting forces during the formation process, our research has conducted 27 Single Point Incremental Forming (SPIF) experiments in hyperboloid format, followed by Finite Element Method (FEM) simulations and regression equations were determined to estimate the maximum axial force in the process. ANOVA analysis of variance was used to determine the significance of material parameters in the maximum axial force response. A multiple linear regression model was constructed to estimate the maximum axial force in the SPIF process. After the experiments, we were able to identify that the maximum axial force increases according to an increase in tool radius, sheet initial thickness, and strength coefficient values, as well as according to the decrease in the strain-hardening exponent. The FEM simulations are in agreement with the experimental values found, and the linear regression model has proven to be efficient to describe results, with R2 of 98.85% and a maximum percentage error of 11.5%.

Experimental investigations and optimization of forming force in incremental sheet forming

Incremental sheet forming process has been proved to be quiet suitable and economical for job and batch type production, which exempts expensive and complex tooling for sheet forming. Investigation of forming forces becomes important for selecting the appropriate hardware and optimal process parameters in order to assure perfection and precision of process. Moreover, lack of available knowledge regarding the process parameters makes the process limited for industrial applications. This research paper aims at finding out effects of different input factors on forming forces in single-point incremental forming (SPIF) process. For operation sustainability and hardware safety, it becomes critical to optimize forming forces for a given set of factors to form a particular shape. In this study, optimization of input factors has been performed to produce conical frustums with helical tool path using Taguchi analysis as design of experiment (DOE) and analysis of variance (ANOVA). The optimal experimental conditions for forming forces have been calculated as sheet thickness (0.8 mm), step size (0.2 mm), tool diameter (7.52 mm), tool shape (hemispherical), spindle speed (1000 rpm), feed rate (1000 mm/min) and wall angle (50o). Effects of tool shape and viscosity of lubricants have also been investigated. An intensive understanding of the mechanism of forming forces has been presented, which shows that force trend after peak values depends upon instant input factors that can be categorized as a safe, severe and crucial set of parameters.

Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming

Single-Point Incremental Forming (SPIF) is an emerging manufacturing process especially suitable to produce small batches of metal parts. Moreover, the enhanced formability of metal sheets deformed by SPIF makes this technology useful to those industrial applications requiring high deformation levels. In this sense, the precise setting of limit strains in SPIF in relation to the conventional formability limits of the material, as well as the influence of the process parameters on these strains, are essential variables to understand how and how much can be deformed the metal sheets in real production. On the other hand, the forming force in SPIF is an essential variable, especially for the design of dedicated equipment or for the safe use of adapted machinery. This paper revisits failure in SPIF by means of an experimental analysis of the influence of process parameters, such as the tool diameter, the spindle speed and the step down, on the formability in SPIF (spifability) of AISI 304 metal sheets, studied in the light of circle grid analysis. The work also involves the independent determination of conventional formability limits by necking and fracture under laboratory conditions by using stretching tests (Nakazima tests), in conjunction with stretch-bending tests performed in order to quantify the influence of the bending induced by the tool radius. Failure strains are experimentally obtained and compared in stretch-bending and SPIF tests, being the failure mode discussed in each case. Finally, the axial forming force evolution was recorded with the aim of analyzing the range of process parameters that would guarantee the safely utilization of the non-dedicated process equipment.