For Fluorescence Lifetime Imaging Research Articles

Fluorescence lifetime imaging of human pancreatic lipase activity using a novel probe for early diagnosis of severe acute pancreatitis

Severe Acute Pancreatitis, a serious condition caused by factors such as gallstones and chronic excessive alcohol consumption, with a very high mortality rate. Human pancreatic lipase (hPL) is a key digestive enzyme and abnormal activity levels of this enzyme are important indicators for diagnosing and monitoring pancreatic diseases. A fluorescent probe, LPP, has been developed to monitor the activity of hPL, especially in cases of SAP. The probe is based on cyanine isoindole derivatives, in vitro experiments confirmed the high specificity and sensitivity of the probe, with a detection limit of 0.012 U/mL, reactions completed within 10 min, and effective monitoring of pancreatic lipase activity in various biological samples. The stability and low cytotoxicity of LPP make it suitable for clinical applications, providing new tools and perspectives for the research and treatment of pancreatic diseases and related metabolic abnormalities. In addition, the change in fluorescence lifetime after the reaction of the probe with lipase allows for fluorescence lifetime imaging (FLIM), effectively monitoring the dynamic changes of hPL and enabling early diagnosis and monitoring of pancreatitis. This research not only enhances the understanding of pancreatic lipase activity detection but also has the potential to improve the diagnostics and treatment of pancreatitis.

NIR Fluorescence lifetime macroscopic imaging with a novel time-gated SPAD camera.

SwissSPAD3 is the latest of a family of widefield time-gated SPAD imagers developed for fluorescence lifetime imaging (FLI) applications. Its distinctive features are (i) the ability to define shorter gates than its predecessors (width W < 1 ns), (ii) support for laser repetition rates up to at least 80 MHz and (iii) a dual-gate architecture providing an effective duty cycle of 100%. We present widefield macroscopic FLI measurements of short lifetime NIR dyes, analyzed using the phasor approach. The results are compared with those previously obtained with SwissSPAD2 and to theoretical predictions.

New Confocal Microscope for Quantitative Fluorescence Lifetime Imaging with Improved Reproducibility

AbstractQuantitative single-molecule and time-resolved fluorescence techniques offer new insights into many samples in life and materials sciences. So far, their adoption has been slow because expert knowledge is required for correct data acquisition and analysis. Now, PicoQuant has developed a single-photon counting confocal microscope, called Luminosa. It combines state-of-the-art hardware with cutting-edge software to deliver high-quality data while simplifying daily operation. The system software includes context-based workflows for each technique, which improve accuracy, reproducibility, and quality of the data. This article showcases how this is achieved for fluorescence lifetime imaging (FLIM).

Fluorescent Probes for Lipid Membranes: From the Cell Surface to Organelles

Biomembranes are ubiquitous lipid structures that delimit the cell surface and organelles and operate as platforms for a multitude of biomolecular processes. The development of chemical tools─fluorescent probes─for the sensing and imaging of biomembranes is a rapidly growing research direction, stimulated by a high demand from cell biologists and biophysicists. This Account focuses on advances in these smart molecules, providing a voyage from the cell frontier─plasma membranes (PM)─toward intracellular membrane compartments─organelles. General classification of the membrane probes can be based on targeting principles, sensing profile, and optical response. Probes for PM and organelle membranes are designed based on multiple targeting principles: conjugation with natural lipids or synthetic targeting ligands and in situ cell labeling by bio-orthogonal chemistry, conjugation to protein tags, and receptor-ligand interactions. Thus, to obtain membrane probes targeting PM with selectivity to one leaflet, we designed membrane anchor ligands based on a charged group and an alkyl chain. According to the sensing profile, we define basic membrane markers with constant emission and probes for biophysical and chemical sensing. The markers are built from classical fluorophores, exemplified by a series of bright cyanines and BODIPY dyes bearing the PM anchors (MemBright). Membrane probes for biophysical sensing are based on environment-sensitive fluorophores: (1) polarity-sensitive solvatochromic dyes; (2) viscosity-sensitive fluorescent molecular rotors; (3) mechanosensitive fluorescent flippers; and (4) voltage-sensitive electrochromic dyes. Our solvatochromic probes based on Nile Red (NR12S, NR12A, NR4A), Laurdan (Pro12A), and 3-hydroxyflavone (F2N12S) through polarity-sensing can visualize liquid ordered and disordered phases of lipid membranes, sense lipid order and its heterogeneity in cell PM, detect apoptosis, etc. Chemically sensitive probes, combining a dye, membrane-targeting ligand, and molecular recognition unit, enable the detection of pH, ions, redox species, lipids, and proteins at the biomembrane surface. In terms of the optical response profile, we can identify (1) fluorogenic (turn-on) probes, allowing background-free imaging; (2) ratiometric probes, e.g., solvatochromic probes, which enable ratiometric imaging by changing their emission/excitation color; (3) fluorescence lifetime-responsive probes, e.g., fluorescence molecular rotors and flippers, suitable for fluorescence lifetime imaging (FLIM); and (4) switchable probes, important for single-molecule localization microscopy. We showed that combining solvatochromic probes with on-off switching through a reversible binding specifically to cell PM enables the mapping of their biophysical properties with superior resolution. While the majority of efforts have been focused on PM, the probes for cellular organelles, such as endoplasmic reticulum, mitochondria, Golgi apparatus, etc., emerge rapidly. Thus, nontargeted solvatochromic probes can distinguish organelles by the emission color. Targeted solvatochromic probes based on Nile Red revealed unique signatures of polarity and lipid order of individual organelles and their different sensitivities to oxidative or mechanical stress. Lipid droplets, which are membraneless lipidic structures, constitute another interesting organelle target for probing the cell stress. Currently, we stand at the beginning of a long route with big challenges ahead, in particular (1) to achieve superior organelle specificity; (2) to label specific biomembrane leaflets, notably the inner leaflet of PM; (3) to detect lipid organization in a proximity of specific proteins; and (4) to probe biomembranes in tissues and animals.

Hardware Inspired Neural Network for Efficient Time-Resolved Biomedical Imaging.

Convolutional neural networks (CNN) have revealed exceptional performance for fluorescence lifetime imaging (FLIM). However, redundant parameters and complicated topologies make it challenging to implement such networks on embedded hardware to achieve real-time processing. We report a lightweight, quantized neural architecture that can offer fast FLIM imaging. The forward-propagation is significantly simplified by replacing matrix multiplications in each convolution layer with additions and data quantization using a low bit-width. We first used synthetic 3-D lifetime data with given lifetime ranges and photon counts to assure correct average lifetimes can be obtained. Afterwards, human prostatic cancer cells incubated with gold nanoprobes were utilized to validate the feasibility of the network for real-world data. The quantized network yielded a 37.8% compression ratio without performance degradation. Clinical relevance - This neural network can be applied to diagnose cancer early based on fluorescence lifetime in a non-invasive way. This approach brings high accuracy and accelerates diagnostic processes for clinicians who are not experts in biomedical signal processing.

On Synthetic Instrument Response Functions of Time-Correlated Single-Photon Counting Based Fluorescence Lifetime Imaging Analysis

Time-correlated single-photon counting (TCSPC) has been the gold standard for fluorescence lifetime imaging (FLIM) techniques due to its high signal-to-noize ratio and high temporal resolution. The sensor system's temporal instrument response function (IRF) should be considered in the deconvolution procedure to extract the real fluorescence decay to compensate for the distortion on measured decays contributed by the system imperfections. However, to measure the instrument response function is not trivial, and the measurement setup is different from measuring the real fluorescence. On the other hand, automatic synthetic IRFs can be directly derived from the recorded decay profiles and provide appropriate accuracy. This paper proposed and examined a synthetic IRF strategy. Compared with traditional automatic synthetic IRFs, the new proposed automatic synthetic IRF shows a broader dynamic range and better accuracy. To evaluate its performance, we examined simulated data using nonlinear least square deconvolution based on both the Levenberg-Marquardt algorithm and the Laguerre expansion method for bi-exponential fluorescence decays. Furthermore, experimental FLIM data of cells were also analyzed using the proposed synthetic IRF. The results from both the simulated data and experimental FLIM data show that the proposed synthetic IRF has a better performance compared to traditional synthetic IRFs. Our work provides a faster and precise method to obtain IRF, which may find various FLIM-based applications. We also reported in which conditions a measured or a synthesized IRF can be applied.

Machine Learning Methods for Fluorescence Lifetime Imaging (FLIM) Based Label-Free Detection of Microglia.

Automated computational analysis techniques utilizing machine learning have been demonstrated to be able to extract more data from different imaging modalities compared to traditional analysis techniques. One new approach is to use machine learning techniques to existing multiphoton imaging modalities to better interpret intrinsically fluorescent cellular signals to characterize different cell types. Fluorescence Lifetime Imaging Microscopy (FLIM) is a high-resolution quantitative imaging tool that can detect metabolic cellular signatures based on the lifetime variations of intrinsically fluorescent metabolic co-factors such as nicotinamide adenine dinucleotide [NAD(P)H]. NAD(P)H lifetime-based discrimination techniques have previously been used to develop metabolic cell signatures for diverse cell types including immune cells such as macrophages. However, FLIM could be even more effective in characterizing cell types if machine learning was used to classify cells by utilizing FLIM parameters for classification. Here, we demonstrate the potential for FLIM-based, label-free NAD(P)H imaging to distinguish different cell types using Artificial Neural Network (ANN)-based machine learning. For our biological use case, we used the challenge of differentiating microglia from other glia cell types in the brain. Microglia are the resident macrophages of the brain and spinal cord and play a critical role in maintaining the neural environment and responding to injury. Microglia are challenging to identify as most fluorescent labeling approaches cross-react with other immune cell types, are often insensitive to activation state, and require the use of multiple specialized antibody labels. Furthermore, the use of these extrinsic antibody labels prevents application in in vivo animal models and possible future clinical adaptations such as neurodegenerative pathologies. With the ANN-based NAD(P)H FLIM analysis approach, we found that microglia in cell culture mixed with other glial cells can be identified with more than 0.9 True Positive Rate (TPR). We also extended our approach to identify microglia in fixed brain tissue with a TPR of 0.79. In both cases the False Discovery Rate was around 30%. This method can be further extended to potentially study and better understand microglia’s role in neurodegenerative disease with improved detection accuracy.

Fluorescence lifetime imaging for intraoperative cancer delineation in transoral robotic surgery.

This study evaluates the potential for fluorescence lifetime imaging (FLIm) to enhance intraoperative decisionmaking during robotic-assisted surgery of oropharyngeal cancer. Using a custom built FLIm instrument integrated with the da Vinci robotic surgical platform, we first demonstrate that cancer in epithelial tissue diagnosed by histopathology can be differentiated from surrounding healthy epithelial tissue imaged in vivo prior to cancer resection and ex vivo on the excised specimen. Second, we study the fluorescence properties of tissue imaged in vivo at surgical resection margins (tumor bed). Fluorescence lifetimes and spectral intensity ratios were calculated for three spectral channels, producing a set of six FLIm parameters. Current results from 10 patients undergoing TORS procedures demonstrate that healthy epithelium can be resolved from cancer (P < .001) for at least one FLIm parameter. We also showed that a multiparameter linear discriminant analysis approach provides superior discrimination to individual FLIm parameters for tissue imaged both in vivo and ex vivo. Overall, this study highlights the potential for FLIm to be developed into a diagnostic tool for clinical cancer applications of the oropharynx. This technique could help to circumvent the issues posed by the lack of tactile feedback associated with robotic surgical platforms to better enable cancer delineation.

High-resolution remote thermometry and thermography using luminescent low-dimensional tin-halide perovskites.

Although metal-halide perovskites have recently revolutionized research in optoelectronics through a unique combination of performance and synthetic simplicity, their low-dimensional counterparts can further expand the field with hitherto unknown and practically useful optical functionalities. In this context, we present the strong temperature dependence of the photoluminescence lifetime of low-dimensional, perovskite-like tin-halides and apply this property to thermal imaging. The photoluminescence lifetimes are governed by the heat-assisted de-trapping of self-trapped excitons, and their values can be varied over several orders of magnitude by adjusting the temperature (up to 20 ns °C-1). Typically, this sensitive range spans up to 100 °C, and it is both compound-specific and shown to be compositionally and structurally tunable from -100 to 110 °C going from [C(NH2)3]2SnBr4 to Cs4SnBr6 and (C4N2H14I)4SnI6. Finally, through the implementation of cost-effective hardware for fluorescence lifetime imaging, based on time-of-flight technology, these thermoluminophores have been used to record thermographic videos with high spatial and thermal resolution.

Characterization of SPAD Array for Multifocal High-Content Screening Applications

Current instruments used to detect specific protein-protein interactions in live cells for applications in high-content screening (HCS) are limited by the time required to measure the lifetime. Here, a 32 × 1 single-photon avalanche diode (SPAD) array was explored as a detector for fluorescence lifetime imaging (FLIM) in HCS. Device parameters and characterization results were interpreted in the context of the application to determine if the SPAD array could satisfy the requirements of HCS-FLIM. Fluorescence lifetime measurements were performed using a known fluorescence standard; and the recovered fluorescence lifetime matched literature reported values. The design of a theoretical 32 × 32 SPAD array was also considered as a detector for a multi-point confocal scanning microscope.

A wide-field TCSPC FLIM system based on an MCP PMT with a delay-line anode.

We report on the implementation of a wide-field time-correlated single photon counting (TCSPC) method for fluorescence lifetime imaging (FLIM). It is based on a 40 mm diameter crossed delay line anode detector, where the readout is performed by three standard TCSPC boards. Excitation is performed by a picosecond diode laser with 50 MHz repetition rate. The photon arrival timing is obtained directly from the microchannel plates, with an instrumental response of ∼190 to 230 ps full width at half maximum depending on the position on the photocathode. The position of the photon event is obtained from the pulse propagation time along the two delay lines, one in x and one in y. One end of a delay line is fed into the "start" input of the corresponding TCSPC board, and the other end is delayed by 40 ns and fed into the "stop" input. The time between start and stop is directly converted into position, with a resolution of 200-250 μm. The data acquisition software builds up the distribution of the photons over their spatial coordinates, x and y, and their times after the excitation pulses, typically into 512 × 512 pixels and 1024 time channels per pixel. We apply the system to fluorescence lifetime imaging of cells labelled with Alexa 488 phalloidin in an epi-fluorescence microscope and discuss the application of our approach to other fluorescence microscopy methods.

Imaging of Metabolic Status in 3D Cultures with an Improved AMPK FRET Biosensor for FLIM.

We describe an approach to non-invasively map spatiotemporal biochemical and physiological changes in 3D cell culture using Forster Resonance Energy Transfer (FRET) biosensors expressed in tumour spheroids. In particular, we present an improved Adenosine Monophosphate (AMP) Activated Protein Kinase (AMPK) FRET biosensor, mTurquoise2 AMPK Activity Reporter (T2AMPKAR), for fluorescence lifetime imaging (FLIM) readouts that we have evaluated in 2D and 3D cultures. Our results in 2D cell culture indicate that replacing the FRET donor, enhanced Cyan Fluorescent Protein (ECFP), in the original FRET biosensor, AMPK activity reporter (AMPKAR), with mTurquoise2 (mTq2FP), increases the dynamic range of the response to activation of AMPK, as demonstrated using the direct AMPK activator, 991. We demonstrated 3D FLIM of this T2AMPKAR FRET biosensor expressed in tumour spheroids using two-photon excitation.

Position sensitive detector for fluorescence lifetime imaging

We present a detector system with a microchannel plate based photomultiplier tube (MCP-PMT) and its application for fluorescence lifetime imaging (FLIM) in visible light. A capacity coupled imaging technique (charge image) combined with a charge division anode is employed for the positional readout. Using an artificial neural network's (ANN) computation model we are able to reconstruct the position of the incident photon as precise as 20 microns over the detector active area of 25 mm diameter. Thus, the resulting image quality corresponds roughly to a megapixel conventional CCD camera. Importantly, it is feasible to reach such resolution using only 9 charge acquisition channels supporting the anode structure of 14 interconnected readout electrodes. Additionally, the system features better than 50 ps temporal resolution allowing single photon counting FLIM acquisition with a regular fluorescence wide-field microscope.

A 65k pixel, 150k frames-per-second camera with global gating and micro-lenses suitable for fluorescence lifetime imaging.

This paper presents our work on a 65k pixel single-photon avalanche diode (SPAD) based imaging sensor realized in a 0.35μm standard CMOS process. At a resolution of 512 by 128 pixels the sensor is read out in 6.4μs to deliver over 150k monochrome frames per second. The individual pixel has a size of 24μm2 and contains the SPAD with a 12T quenching and gating circuitry along with a memory element. The gating signals are distributed across the chip through a balanced tree to minimize the signal skew between the pixels. The array of pixels is row-addressable and data is sent out of the chip on 128 lines in parallel at a frequency of 80MHz. The system is controlled by an FPGA which generates the gating and readout signals and can be used for arbitrary real-time computation on the frames from the sensor. The communication protocol between the camera and a conventional PC is USB2. The active area of the chip is 5% and can be significantly improved with the application of a micro-lens array. A micro-lens array, for use with collimated light, has been designed and its performance is reviewed in the paper. Among other high-speed phenomena the gating circuitry capable of generating illumination periods shorter than 5ns can be used for Fluorescence Lifetime Imaging (FLIM). In order to measure the lifetime of fluorophores excited by a picosecond laser, the sensor's illumination period is synchronized with the excitation laser pulses. A histogram of the photon arrival times relative to the excitation is then constructed by counting the photons arriving during the sensitive time for several positions of the illumination window. The histogram for each pixel is transferred afterwards to a computer where software routines extract the lifetime at each location with an accuracy better than 100ps. We show results for fluorescence lifetime measurements using different fluorophores with lifetimes ranging from 150ps to 5ns.

Fluorescence lifetime imaging using light emitting diodes

We demonstrate flexible use of low cost, high-power light emitting diodes as illumination sources for fluorescence lifetime imaging (FLIM). Both time-domain and frequency-domain techniques have been implemented at wavelengths spanning the range 450–640 nm. Additionally, we demonstrate optically sectioned fluorescence lifetime imaging by combining structured illumination with frequency-domain FLIM.

Genetically encoded probe for fluorescence lifetime imaging of CaMKII activity

Ca 2+/calmodulin-dependent protein kinase II (CaMKII) is highly enriched in excitatory synapses in the central nervous system and is critically involved in synaptic plasticity, learning, and memory. However, the precise temporal and spatial regulation of CaMKII activity in living cells has not been well described, due to lack of a specific method. Here, based on our previous work, we attempted to generate an optical probe for fluorescence lifetime imaging (FLIM) of CaMKII activity by fusing the protein with donor and acceptor fluorescent proteins at its amino- and carboxyl-termini. We first optimized the combinations of fluorescent proteins by taking advantage of expansion of fluorescent proteins towards longer wavelength in fluorospectrometric assay. Then using digital frequency domain FLIM (DFD–FLIM), we demonstrated that the resultant protein can indeed detect CaMKII activation in living cells. These FLIM versions of Camui could be useful for elucidating the function of CaMKII both in vitro and in vivo.

Miniaturized side-viewing imaging probe for fluorescence lifetime imaging (FLIM): validation with fluorescence dyes, tissue structural proteins and tissue specimens

We report a side viewing fibre-based endoscope that is compatible with intravascular imaging and fluorescence lifetime imaging microscopy (FLIM). The instrument has been validated through testing with fluorescent dyes and collagen and elastin powders using the Laguerre expansion deconvolution technique to calculate the fluorescence lifetimes. The instrument has also been tested on freshly excised unstained animal vascular tissues.

Cucurbituril Encapsulation of Fluorescent Dyes

The potential of cucurbiturils, water-soluble macrocyclic host molecules composed of glycoluril units, for tuning the properties of fluorescent dyes and advancing new applications is illustrated. Cucurbit[7]uril (CB7), which presents a particularly attractive derivative due to its intermediary size and high water solubility, has been shown to display a variety of advantageous effects on fluorescent dyes, which include increased fluorescence intensity and brightness, enhanced photostability, protection towards fluorescence quenchers, solubilization, and deaggregation. Particularly noteworthy is the prolongation of the fluorescence lifetimes of different dyes, which can be traced back to the low polarizability of the host cavity. In addition, the host serves as cation receptor, which causes a considerable shift of protonation equilibria and assists the protonation of fluorescent dyes. The latter effect can be exploited in the design of protolytic fluorophore displacement assays. The perspective of cucurbiturils as stabilizers for laser dyes, enhancement agents in time-resolved fluorescence (TRF) assays, contrast agents for fluorescence lifetime imaging (FLIM), and dyes for fluorescent collectors for solar cells is mentioned. Original experimental results for the effect of CB7 on the fluorescence properties of three dyes (Macrolex Yellow 10 GN, Dapoxyl, and 4-(dimethylamino)benzonitrile) are presented.

Time-resolved Hadamard fluorescence imaging

We present a new concept for fluorescence lifetime imaging (FLIM) based on time-resolved Hadamard imaging (HI). HI allows image acquisition by use of one single-point detector without requiring a moving scanning stage. Moreover, it reduces the influence of detector noise compared with raster scanning. By use of Monte Carlo simulations it could be confirmed that Hadamard transformation may decrease the error in lifetime estimation and in general in fluorescence parameter estimation when the signal-to-noise ratio is low and detector dark noise is high. This concept may find applications whenever the performance of FLIM or similar methods is limited by high dark-count rates and when the use of a single-point detector is preferable.

Calcium imaging using fluorescence lifetimes and long-wavelength probes

We describe imaging of calcium concentrations using the long-wavelength Ca(2+) indicators, Calcium Green, Orange, and Crimson. The lifetimes of these probes were measured using the frequency-domain method and were found to increase from 50% to severalfold in response to calcium. The two-dimensional images of the calcium concentration were obtained using a new apparatus for fluorescence lifetime imaging (FLIM). We also describe procedures to correct for the position-dependent frequency response of the gain-modulated image intensifier used in the FLIM apparatus. Importantly, the FLIM method does not require the probe to display shifts in the excitation or emission spectra. Using the FLIM method, calcium imaging is possible using probes which display changes in lifetime in response to calcium. Consequently, calcium imaging is possible with excitation wavelengths ranging from 488 to as long as 620 nm, where autofluorescence and/or photochemical damage is minimal. These probes are also suitable for calcium measurements of single cells using lifetime-based flow cytometry.