Foliar Application Of Silicon Research Articles

Role of phytolith occluded carbon of cereales plants for climate change mitigation

Phytolith-occluded carbon (PhytOC) is highly stable, and constitutes an important source of long-term C storage in agrosystems. This stored carbon is resistant to the processes of oxidation of carbon compounds. In our research phytolith content in barley (Estonia) and oat (Poland) grain and straw was assessed at field trials, with Si as a liquid immune stimulant OPTYSIL and compost fertilisation. We showed that cereals can produce relatively high amounts of phytoliths. PhytOC plays a key role in carbon sequestration, particularly for poor, sandy Polish and Estonian soils. The phytolith content was always higher in straw than in grain regardless of the type of cereals. The phytolith content in oat grains varied from 18.46 to 21.28 mg∙g−1 DM, and in straw 27.89–38.97 mg∙g−1 DM. The phytolith content in barley grain ranged from 17.24 to 19.86 mg∙g−1 DM, and in straw from 22.06 to 49.08 mg∙g−1 DM. Our results suggest that oat ecosystems can absorb from 14.94 to 41.73 kg e-CO2∙ha−1 and barley absorb from 0.32 to 1.60 kg e-CO2∙ha−1. The accumulation rate of PhytOC can be increased 3-fold in Polish conditions through foliar application of silicon, and 5-fold in Estonian conditions. In parallel, the compost fertilisation increased the phytolith content in cereals.

The Effect of Seed Moisture Content of Hybrid Maize at Harvest Time on Seed Germination Traits and Antioxidant Enzymes Activity under Simulated Environmental Stresses with Silicon Foliar Application

The Effect of Seed Moisture Content of Hybrid Maize at Harvest Time on Seed Germination Traits and Antioxidant Enzymes Activity under Simulated Environmental Stresses with Silicon Foliar Application

Improvement of Nutrient Content, Physiological Traits and Grain Yield of Maize Varieties Grown in Saline Soil by Combining Biochar, Mycorrhizal Fungi and Silicon Foliar Application

Improvement of Nutrient Content, Physiological Traits and Grain Yield of Maize Varieties Grown in Saline Soil by Combining Biochar, Mycorrhizal Fungi and Silicon Foliar Application

Sole and combined foliar application of silicon and putrescine alleviates the negative effects of drought stress in maize by modulating the morpho-physiological and antioxidant defence mechanisms

Sole and combined foliar application of silicon and putrescine alleviates the negative effects of drought stress in maize by modulating the morpho-physiological and antioxidant defence mechanisms

Effect of Form of Silicon and the Timing of a Single Foliar Application on Sugar Beet Yield

The aim of the study was the evaluation of silicon foliar application on sugar beet yield. In the years 2017–2019, the effect of a single foliar application of various forms of silicon (potassium silicate—PS, calcium silicate—CS, sodium metasilicate—SM, and orthosilicic stabilized acid—OSA) applied in the six-leaf phase of sugar beet, 7 and 14 days later on yield and technological quality of sugar beet roots was assessed. It was found that the form of silicon does not have a significant effect on the yield of sugar beet roots, and significantly modifies the biological yield of sugar and the pure sugar yield. The highest biological yield of sugar is achieved by the foliar application of PS, and the pure sugar yield by PS and OSA. The date of foliar application as well as the interaction of the date of application and silicon forms do not have a significant effect on the root yield, biological yield of sugar, and pure sugar yield. The form of silicon has a significant effect on the technological quality of sugar beet roots (sugar, α-amino nitrogen, potassium, and sodium content). The most beneficial effect on the sugar content and reduction of sodium content in sugar beet roots is the foliar application of OSA, and the reduction of α-amino nitrogen and potassium content—PS. The timing of the application of various forms of silicon has a significant effect on the sugar and potassium content in sugar beet roots. The most beneficial effect on the sugar content in the roots is the application carried out 7 days after the six-leaf phase of sugar beet, and the potassium content is most limited by the treatment 14 days after reaching this phase. The interaction of the timing of foliar application and the form of silicon significantly modifies the technological quality features of sugar beet roots: the content of sugar, α-amino nitrogen, potassium, and sodium. The results of the study proved the significant effect of silicon foliar application on the physiological parameters of plants, such as leaf area index (LAI), absorption of photosynthetically active radiation (PAR) and normalized difference vegetation index (NDVI) which are related to yield and sugar beet productivity.

Foliar Silicon Application Enhances Medicinal Quality and Salt Tolerance of Two Licorice Species by Improving Their Growth, Physiological Characteristics, and Root Effective Components

Foliar Silicon Application Enhances Medicinal Quality and Salt Tolerance of Two Licorice Species by Improving Their Growth, Physiological Characteristics, and Root Effective Components

Foliar application of silicon mediated physiological responses and improvement in yield by modulating antioxidant defense system of wheat under salinity stress

Foliar application of silicon mediated physiological responses and improvement in yield by modulating antioxidant defense system of wheat under salinity stress

Effects of Silicon Application on Yield, Spectral Index, and Fall Armyworm (Spodoptera frugiperda) Infestation on Maize (Zea mays) Crop

This paper presents the implementation of statistical and remote sensing techniques to analyze the spectral response, grain yield, and infestation of fall armyworm (Spodoptera frugiperda) in corn (Zea mays) based on the application of edaphic and foliar treatments with silicon, comparing the results with those reported in the literature where it has been demonstrated that the incorporation of this nutrient in different crops improves the activity of the enzyme nitrate reductase and dry matter weight gain. The results show that the foliar application of silicon tends to increase grain production in the crop, while the soil treatment does not improve yield. Similarly, foliar silicon application improves the Normalized Difference Vegetation Index, which improves plant health and could be correlated with higher grain yield of the crop. An inverse correlation was detected between the use of foliar silicon and the Normalized Difference Water Index and a direct relationship in the case of direct field application. As for the analysis of the data to verify the influence of the use of silicon on fall armyworm infestation, no statistically significant evidence was found that would lead to the conclusion that the application of this element, whether in soil or foliar form, could lead to a decrease in crop infestation.

The synergistic effects of soil-applied boron and foliar-applied silicon on cotton fiber quality and yield

Studies of boron (B) and silicon (Si) synergy in cotton crops have shown promising results; however, the focus was on the foliar application of B and Si. Nonetheless, B is an element with little mobility in the plant and its best form of application is in the soil. Thus, the objective of this study was to evaluate the synergistic effect of soil applied B and foliar applied sSi on fiber quality and crop yield of cotton. For this purpose, a field experiment was carried out using cotton cultivar FM 985 GLTP. The soil’s B in the experimental site is classified as low for cotton cultivation. The experiment was conducted in a randomized complete-block design, in a 3 × 2 factorial scheme, with three doses of B: 0.0 kg ha−1 (deficiency), 2.0 kg ha−1 (recommended dose), and 4.0 kg ha−1 (high dose) in the absence and presence (920 g L−1) of Si, with four replications. One week after the 4th application of Si, B and Si leaf content was determined. At boll opening, crop yield was estimated, and fiber quality analysis was realized. Boron deficiency reduced cotton yield, in 11 and 9%, compared to the application of 2 and 4 kg ha−1 of B, respectively. The presence of Si, however, increased plant yield in 5% in the treatments with 0 and 2 kg ha−1 of B, respectively. Cotton fiber length and elongation were not influenced by the B doses and Si presence. Fiber breaking strength was increased in 5% by the presence of Si and was not influenced by B deficiency. Micronaire was 8% smaller in the treatment with 0 kg ha−1 of B and 6% smaller in the absence of Si. Short fiber index was 4% greater in the plants of the treatment with 0 kg ha−1 of B. The results of this study reports that the complementation with Si via foliar application increases fiber quality by enhance breaking strength and micronaire. In conclusion, the interaction between soil-applied B and foliar-applied Si is beneficial for cotton cultivation, resulting in high cotton yield with better fiber quality.

Effect of Foliar Application of Silicon and Selenium on the Growth, Yield and Fruit Quality of Tomato in the Field

Tomato (Solanum lycopersicon) is a widely produced and consumed fruit vegetable worldwide. Silicon (Si) and selenium (Se) can promote crop growth and development. However, the effects of these elements on tomato fruit quality have not been investigated comprehensively, nor are their combined effects on yield and quality clear. The aim of this study was to investigate the effects of foliar application of Si and Se on tomato growth, yield and fruit quality. The tomato plants were foliarly applied with 1 mM Si and 25 μM Se individually or in combination, and the experiment was carried out in a plastic arch shed at Yangling in spring. Our results demonstrated improved plant growth by application of Si and Se, with the effect of combined treatment being more obvious. Application of Si individually or in combination with Se increased the yield. Se addition increased the concentrations of soluble sugars, vitamin C, phenols, anthocyanin, lycopene, carotenoids, Se and protein, and decreased the nitrate level, but did not affect the concentration of total organic acids in the fruit. Si application induced similar changes to Se addition in the levels of sucrose and protein in the fruit, but had no effect on other quality traits. The combined Si and Se treatment did not show significant superior effects on the fruit quality over their individual applications. Our results suggest that Si and Se application improved the tomato plant growth. Si and Se application, respectively, had obvious effects in the yield increase and quality improvement, and the combined treatment had positive effects on both aspects. The study may provide a theoretical base for the application of Se and Si fertilizers in tomato production.

Application of silicon foliar spray to increase growth and yield of shallot (Allium ascalonicum L.) under sprinkler and furrow irrigation system

Silicon foliar application can help mitigate the negative effects of drought stress and is an important component of climate-smart agriculture. This study aimed to assess the effect of various concentrations of silicon foliar spray (SFS) on shallot growth and yield under two irrigation systems. On-farm experiment was arranged in the randomized block with split-plot design in dryland of East Lombok District of Nusa Tenggara Barat (NTB) Province during dry season of 2018. The main plot was furrow and sprinkler irrigation system, and the sub-plot was four concentrations of SFS (0, 15, 30, and 45 ml) with five replications. In general, plant height, leaf number, bulb number, and fresh biomass of shallot were increased following the increase of SFS concentration, with the optimal dosage being 15 ml/lt for the experiment site. Shallot fresh yield was significantly higher under sprinkler irrigation (3.72 kg/m2) compared to furrow irrigation (2.70 kg/m2). The significant interaction effects were found on plant height (20 and 40 days after planting) and weight loss (after sun-dried and after 90 days of storage to produce bulb seeds). All in all, the sun-dried shallot yield was significantly higher from 14.76% (30 ml) to 28.40% (15 ml) compared to the control.

Agronomic, Physiological, and Post-Harvest Aspects of Different Blueberry Cultivars Treated with Silicon

The objective of this study was to evaluate the effect of foliar application of silicon in different blueberry (Vaccinium myrtillus) cultivars. The treatments were installed in a factorial design with six replications, and consisted of three different cultivars (Brightwell, Beckblue and Climax) with or without regular application of silicon via foliar, using silicon oxide at 1.5 g L-1. It was evaluated the following plant attributes: leaf area, chlorophyll fluorescence, and phenylalanine ammonia lyase activity, meanwhile the following postharvest attributes were evaluated: fruit number, diameter and weight, yield, pH, content of soluble solids, titratable acidity, contents of phenolic compounds and anthocyanins, and activity of peroxidase. Vegetative development of blueberry plants in response to Si presented higher yield, leaf area, phenylalanine ammonia lyase activity, and higher chlorophyll fluorescence relationships such as maximum photochemical efficiency and PSII potential activity, as well as less stressed plants, especially in cultivars Climax and Brightwell. For post-harvest physicochemical characteristics, silicon foliar application improved fruit weight and diameter for cvs. Beckblue and Climax, and fruit number for cv. Brightwell. All cultivars, in response to silicon application increased the titratable acidity, the levels of phenolic compounds, the level of anthocyanins, whereas peroxidase activity decreased. The performance of the evaluated blueberry cultivars was better through silicon application, with greater performance of vegetative growth, fruit yield, and fruit quality, especially in cultivar Climax, which was the most suitable in terms in of fruit yield in this study.

Foliar-applied silicon and selenium nanoparticles modulated salinity stress through modifying yield, biochemical attribute, and fatty acid profile of Physalis alkekengiL.

Soil salinity is a major environmental problem owing to its negative impact on agricultural productivity and sustainability. Nanoparticles (NPs) have recently been highlighted for their ability to alleviate salinity stress. The current study aimed to alleviate salt stress by using silicon (Si) and selenium (Se) NPs on the growth and physiological attributes of Physalis alkekengi L. Plants were irrigated with saline water at 50, 100, and 200 mM NaCl, and Si NPs (200 mg L-1) and Se NPs (50 mg L-1) were sprayed on leaves three times in a pot experiment in 2022. Leaf chlorophyll (Chl) content, antioxidant capacity, and fatty acid (FA) profile of fruits were measured to find the effects of NPs and salinity in the plants. Salinity at 50 mM did not significantly differ from the control, but at 100-200 mM, salt stress had a substantial impact on the majority of traits. Compared with non-saline conditions, 200 mM NaCl led to decreases in shoot weight (40%), fruit weight (30%), Chl a (30%), Chl b (39%), anthocyanin (31%), ascorbic acid (16%), total phenolic content (TPC, 11%) but increases in total soluble solids (TSS, 79%), titration acidity (TA, 17%), and TSS/TA (52%) in plants without spraying the NPs. However, Si and Se NPs modulated salinity stress by increasing shoot and fruit weight, Chl content, anthocyanin, and TPC, and with decreasing TSS and TSS/TA. Salinity elevated polyunsaturated fatty acids (PUFAs) and lowered monounsaturated fatty acids (MUFAs). According to multivariate analysis, 50 mM and control were found to be in the same cluster, whereas 100 and 200 mM were shown to be in different clusters. Foliar application of Si and Se NPs at 200 and 50 mg L-1, respectively, can be recommended for mitigating salt stress at 100-200 mM NaCl inP. alkekengiL. Plants. Farmers can use the findings to increase the ability of Si and Se NPs to protect plants against salt.

Foliar application of silicon and boron improves boll retention, lint yield and fiber quality traits of transgenic cotton

BackgroundCotton (Gossypium hirsutum L.) is an important fiber crop that has a widespread cultivation in tropical and subtropical regions globally. The decline in cotton production over the last two decades may be attributed to the effects of climate change and imbalances in mineral nutrition. However, mineral nutrition, particularly micronutrients has been less focused in cotton production. Silicon (Si) and boron (B) are considered crucial micronutrients that play diverse functions in the physiological and biochemical development of plants, as well as in enhancing their resistance to abiotic stress. MethodsThe present study investigated the impact of individual and combined foliar application of Si and B on the development of transgenic (Bt) cotton, as well as their impacts on boll retention, seed cotton production, and fiber quality indicators. Treatments included individual application of 2.0- and 4.0-mM Si and 0.5- and 1.0-mM B, and combined application 2.0 mM Si + 0.5 mM B, 2.0 mM Si + 1.0 mM B, 4 mM Si + 0.5 mM B and 4.0 mM Si + 1.0 mM B. Water spray and no foliar application were regarded as controls for comparison. ResultsCombined application of 4 mM Si + 1.0 mM B resulted in the highest ginning out turn (39%), fiber uniformity (83%) and fiber length (28 mm). The longest plant height and the highest number of closed bolls per plant were recorded with sole application of 0.5 mM B, while sole application of 1 mM B produced the highest number of monopodial branches (20.26), sympodial branches (33.53) and total number of bolls (37.03) per plant. The highest boll weight (18.39 g), boll retention (64.38%) and seed cotton yield (1253.7 kg ha−1) were recorded for sole application of 1.0 mM B. ConclusionThe results revealed that combined foliar application of 4.0 mM Si + 0.5 or 1.0 0.5 mM fiber quality traits, whereas sole application of 1.0 mM B improved growth and yield related traits. Therefore, B and Si can be applied in combination to improve the fiber quality, whereas sole application of B could increase yield-related traits.

Unveiling the significance of foliar-applied silicon, selenium and phosphorus for the management and remediation of arsenic in two different rice genotypes

Under paddy soil conditions, rice plants are vulnerable to arsenic (As) accumulation, thus causing potential threat to human health. Here we investigated the influence of foliar-applied phosphorus (P: 10 and 20 mg L−1), silicon (Si: 0.6 and 1.5 g L−1) and selenium (Se: 5 and 10 mg L−1) on As accumulation, morphological and physiological attributes of two contrasting rice genotypes (KSK-133 and Super Basmati) under As stress (25 mg kg−1 as arsenate). Silicon foliar dressing significantly (p < 0.05) reduced grain As uptake (up to 67%) and improved rice growth and chlorophyll content (28–66%) in both rice genotypes over their controls. Phosphorus foliar application resulted in a notable decrease (17%) in grain As uptake of coarse rice genotype (KSK-133), while it slightly increased grain As uptake in the fine one (Super Basmati; 6%) compared to controls. However, foliar-applied Se did not show significant effects on rice plants growth attributes and As uptake in both genotypes. Similarly, biochemical and enzymatic attributes (i.e., lipid peroxidation, electrolyte leakage, peroxidase and catalase) were improved with Si application in rice plants, except for P treatment that was only effective for coarse one. Foliar-applied Si also resulted in reduced cancer risk and hazard quotient (< 0.10) for both rice genotypes. This study advances our understanding on critical role of different foliar-applied nutrients and rice genotypes, which is imperative to develop effective As remediation and management strategies in coarse and fine rice genotypes and protect human health.

Effect of Silicon on Micronutrient Content in New Potato Tubers

Since silicon can improve nutrient uptake in plants, the effect of foliar silicon (sodium metasilicate) application on micronutrient content in early crop potato tuber was investigated. Silicon was applied at dosages of 23.25 g Si∙ha–1 or 46.50 g Si∙ha–1 (0.25 L∙ha–1 or 0.50 L∙ha–1 of Optysil) once at the leaf development stage (BBCH 14–16), or at the tuber initiation stage (BBCH 40–1), and twice, at the leaf development and tuber initiation stages. Potatoes were harvested 75 days after planting (the end of June). Foliar-applied silicon reduced the Fe concentration and increased Cu and Mn concentrations in early crop potato tubers under water deficit conditions but did not affect the Zn, B, or Si concentrations. The dosage and time of silicon application slightly affected the Fe and Cu concentration in the tubers. Under drought conditions, the highest Mn content in the tuber was observed when 46.50 g Si∙ha–1 was applied at the leaf development stage, whereas under periodic water deficits, it was highest with the application of the same silicon dosage at the tuber initiation stage (BBCH 40–41). The Si content in tubers was negatively correlated with the Fe and B content, and positively correlated with the Cu and Mn content.

Modulation of Antioxidant Defense Mechanisms and Morpho-Physiological Attributes of Wheat through Exogenous Application of Silicon and Melatonin under Water Deficit Conditions

Although the individual influences of silicon (Si) and melatonin (MT) have been widely studied under various abiotic stresses, little is known about their interaction under drought stress. In this study, an experiment in pots was carried out to investigate the potential of an individual or combined foliar application of silicon (Si) and melatonin (ML) (control (ck), water spray, 4.0 mM Si, 200 µM ML, and 4.0 mM Si + 200 µM ML) on wheat grown at two different water-holding capacity levels (80% well-water condition and 40% drought stress) in order to check of grain yield and some important physiological characteristics. Under drought stress conditions, grain yield and yield attributes, water content and photosynthetic efficiency of wheat crops were significantly decreased. Application of Si+ ML significantly improved leaf pigments (Chl a, Chl b and Chll a + b), leaf relative water content (RWC), proline, total soluble sugars, and total soluble protein. As well as, the activities of important antioxidant enzymes, including catalase (CAT), superoxide dismutase (SOD), peroxidase (POD) and ascorbate peroxidase (APX) were effectively boosted through the combined application of Si + ML. This improvement was correlated with an obvious decrease in the levels of MDA, H2O2, and electrolyte leakage and increased water use efficiency. Conclusively, the combination of Si + ML significantly enhanced the 20.21% yield and various morpho-physiological attributes of drought-stressed wheat plants and can be recommended as a promising treatment to enhance wheat productivity in drought-affected regions. Additionally, the results of this study may open up a whole new area of research opportunities at the transcriptional level to further understand the mechanisms underlying how Si + ML integrates and interacts with plants under drought stress.

Foliar Application of Silicon to Boost Biochemical and Physiological Response in Oat Under Water Stress

Foliar Application of Silicon to Boost Biochemical and Physiological Response in Oat Under Water Stress

Effect of Zinc and Foliar Application of Silicon on Growth and Yield of Maize (Zea mays L.)

The field experiment was conducted during Zaid season of 2022 at Crop Research Farm, Department of Agronomy, Naini Agricultural Institute, Sam Higginbottom University of Agriculture, Technology and Sciences, Prayagraj (U.P) India. To study the effect of Zinc and foliar application of silicon on growth and yield of maize. The treatment consist of the 3 levels of Zinc (5,10,15 kg/ha) and three levels of Silicon (200,350,500 ppm) as a foliar spray are included respectively. The experiment was laid out in Randomized Block Design with 10 treatments and replicated thrice. The results showed that Zn 15kg/ha + Si 500ppm (Treatment -9) plant height (187.78cm), No. of leaves per plant (12.0) plant dry weight (181.62 g/plant), No. of cobs/plant (1.63/plant), Length of the cob/plant (15.43 cm), No. of rows/cob (14.82), No. of grains/cob (317.54), seed yield (7.92 t/ha) and Stover yield (11.34 t/ha), test weight (241.96 g).

Foliar application of silicon, selenium, and zinc nanoparticles can modulate lead and cadmium toxicity in sage (Salvia officinalis L.) plants by optimizing growth and biochemical status

Different techniques have been used to alleviate metal toxicity in medicinal plants; accordingly, nanoparticles (NPs) have a noticeable interest in modulating oxidative stresses. Therefore, this work aimed to compare the impacts of silicon (Si), selenium (Se), and zinc (Zn) NPs on the growth, physiological status, and essential oil (EO) of sage(Salvia officinalis L.)treated with foliar application of Si, Se, and Zn NPs upon lead (Pb) and cadmium (Cd) stresses. The results showed that Se, Si, and Zn NPs decreased Pb accumulation by 35, 43, and 40%, and Cd concentration by 29, 39, and 36% in sage leaves. Shoot plant weight showed a noticeable reduction upon Cd (41%) and Pb (35%) stress; however, NPs, particularly Si and Zn improved plant weight under metal toxicity. Metal toxicity diminished relative water content (RWC) and chlorophyll, whereas NPs significantly enhanced these variables. The noticeable raises in malondialdehyde (MDA) and electrolyte leakage (EL) were observed in plants exposed to metal toxicity; however, they were alleviated with foliar application of NPs. The EO content and EO yield of sage plants decreased by the heavy metals but increased by the NPs. Accordingly, Se, Si, and Zn NPS elevated EO yield by 36, 37, and 43%, respectively, compared with non-NPs. The primary EO constituents were 1,8-cineole (9.42-13.41%), α-thujone (27.40-38.73%), β-thujone (10.11-12.94%), and camphor (11.31-16.45%). This study suggests that NPs, particularly Si and Zn, boosted plant growth by modulating Pb and Cd toxicity, which could be advantageous for cultivating this plant in areas with heavy metal-polluted soils.