Fluoroscopic Method Research Articles

Comparison of femoral tunnel position and knee function in anterior cruciate ligament reconstruction: a retrospective cohort study using measuring-fluoroscopy method versus bony marker method

BackgroundPrevious studies have shown that surgical technique errors especially the wrong bone tunnel position are the primary reason for the failure of anterior cruciate ligament (ACL) reconstruction. In this study, we aimed to compare the femoral tunnel position and impact on knee function during the ACL reconstruction using measuring combined with fluoroscopy method and bony marker method for femoral tunnel localization.MethodsA retrospective cohort study of patients undergoing ACL reconstruction using the bony marker method or measuring combined with fluoroscopy for femoral tunnel localization was conducted between January 2015 and January 2020. A second arthroscopic exploration was performed more than 1 year after surgery. Data regarding patient demographics, the femoral tunnel position, results of the Lysholm score, the International Knee Documentation Committee (IKDC) score, KT-1000 side-to-side difference, pivot shift grade, and Lachman grade of the knee were collected.ResultsA total of 119 patients were included in the final cohort. Of these, 42 cases were in the traditional method group, and 77 cases were in the measuring method group. The good tunnel position rate was 26.2% in the traditional method group and 81.8% in the measuring method group (p < 0.001). At the final follow-up, the Lysholm and IKDC scores were significantly greater in the measuring method group than the traditional method group (IKDC: 84.9 ± 8.4 vs. 79.6 ± 6.4, p = 0.0005; Lysholm: 88.8 ± 6.4 vs. 81.6 ± 6.4, p < 0.001). Lachman and pivot shift grades were significantly greater in the measuring method group (p = 0.01, p = 0008). The results of KT-1000 side-to-side differences were significantly better in the measuring method group compared with those in the traditional method group (p < 0.001).ConclusionsThe combination of the measuring method and intraoperative fluoroscopy resulted in a concentrated tunnel position on the femoral side, a high rate of functional success, improved knee stability, and a low risk of tunnel deviation. This approach is particularly suitable for surgeons new to ACL reconstructive surgery.

A new fluoroscopic view to evaluate the medial and lateral articular reduction quality in patella fractures during internal fixation

To introduce a new fluoroscopic method for assessing the quality of medial and lateral joint surface reduction during internal fixation of patellar fractures and to summarize the clinical outcomes of patients treated using this method. A retrospective analysis was conducted on the clinical data of 52 patients with patellar fractures treated between January 2018 and January 2022 who met the inclusion criteria. There were 27 male and 25 female patients, aged 21-75 years, with an average age of 62 years. The types of patellar fractures included 9 transverse fractures, 37 comminuted fractures, and 6 longitudinal fractures. According to the AO/Orthopaedic Trauma Association (AO-OTA)-2018 fracture classification, there were 21 cases of type 34A, 6 cases of type 34B, and 25 cases of type 34C. The time from injury to operation ranged from 1 to 5 days, with an average of 2.3 days. Treatments included internal fixation with hollow screws or hollow screw tension bands, with or without anchor repair. During operation, the medial and lateral joint surfaces of the patella were observed using the tangential fluoroscopic method to assess the smoothness of reduction of the median ridge, lateral joint surface, medial joint surface, and lateral joint edge. Patients were followed up regularly, and X-ray films were taken to observe fracture healing. Knee joint range of motion, Böstman score, and Lysholm score were used to evaluate functional recovery. The tangential fluoroscopic method for the medial and lateral joint surfaces of the patella during operation showed satisfactory reduction of the joint surfaces and good positioning of the implants. All patients were followed up 12-16 months, with an average of 13.4 months. During the follow-up, fracture displacement occurred in 1 case and titanium cable breakage in 1 case. All patella fractures healed successfully, with a healing time of 8-16 weeks (mean, 11.4 weeks). At last follow-up, knee joint range of motion ranged from 120° to 140°, with an average of 136°. The Böstman score ranged from 20 to 30, with an average of 28, yielding excellent results in 45 cases and good results in 7 cases. The Lysholm score ranged from 88 to 100, with an average of 93, yielding excellent results in 40 cases and good results in 12 cases. The intraoperative application of the tangential fluoroscopic method for the medial and lateral joint surfaces of the patella can quickly determine the fluoroscopic plane of the patella, accurately assess the quality of fracture reduction and the position of internal fixator, thereby improving effectiveness.

The Intermalleolar Method for Intraoperative Rotational Assessment of the Tibia-A Prospective Clinical Validation Study.

To determine the accuracy of the intermalleolar method, an intraoperative fluoroscopic method for assessing tibial rotation in patients undergoing intramedullary nail fixation for tibial shaft fractures, by comparing it with the gold standard computed tomography (CT). Prospective cohort study. Academic Level 1 trauma center. Consecutive patients, aged 18 years and older, with unilateral tibial shaft fractures who underwent intramedullary fixation from September 2021 to January 2023. Intraoperatively, tibial rotation measurements were obtained using the intermalleolar method on both the uninjured and injured limbs. Postoperatively, patients underwent bilateral low-dose lower extremity rotational CT scans. CT measurements were made by 4 blinded observers. Mean absolute rotational differences and standard errors were calculated to compare the injured and uninjured limbs. Subgroup analysis was performed assessing accuracy relating to injured versus uninjured limbs, body mass index, OTA/AO fracture pattern, tibial and fibular fracture location, and distal articular fracture extension requiring fixation. Of the 20 tibia fractures, the mean patient age was 43.4 years. The intermalleolar method had a mean absolute rotational difference of 5.1 degrees (standard error 0.6, range 0-13.7) compared with CT. Sixty percent (24/40) of the measurements were within 5 degrees, 90% (36/40) of the measurements were within 10 degrees, and 100% (40/40) were within 15 degrees of the CT. No patients were revised for malrotation postoperatively. The intermalleolar method is accurate and consistently provides intraoperative tibial rotation measurements within 10 degrees of the mean CT measurement for adult patients undergoing intramedullary nail fixation for unilateral tibial shaft fractures. This method may be employed in the operating room to accurately quantify tibial rotation and assist with intraoperative rotational corrections. Diagnostic Level II. See Instructions for Authors for a complete description of levels of evidence.

Palpation and fluoroscopy are valid but unreliable for the assessment of femoral tunnel position after medial patellofemoral ligament reconstruction

ObjectivesThe purpose of this study was to evaluate the validity and reliability of two techniques, palpation and fluoroscopy, for assessing medial patellofemoral ligament (MPFL) reconstruction femoral tunnel position accuracy. MethodsTwenty-one fresh frozen cadaveric knees had an MPFL femoral tunnel drilled and filled with a metal screw. Tunnels were created in a nonstandard fashion to ensure the sample included a range of tunnel positions from poor to ideal. Six experienced sport medicine and arthroscopy surgeons evaluated the placement of the femoral tunnel by palpating the screw in relation to anatomic landmarks and by fluoroscopy related to Schöttle's Point. They evaluated 1) the accuracy of femoral tunnel placement, 2) the direction of tunnel error, and 3) the clinical acceptability of the tunnel position. Validity measures included sensitivity, specificity, and correlation to clinical acceptability, which were calculated for the palpation and fluoroscopic assessments. Reliability measures included interrater reliability (ICC 2,k) for femoral tunnel accuracy and percent agreement of the raters' tunnel direction assessment. ResultsThe palpation method demonstrated a sensitivity of 0.79 and specificity of 0.84 for assessing the accuracy of femoral tunnel placement, while the fluoroscopic method showed a sensitivity of 0.83 and specificity of 0.92. Pearson correlation coefficients for clinical acceptability of tunnel position were high, with both techniques ranging from .589 to .854. Interrater reliability for the palpation and fluoroscopic techniques for assessment of tunnel accuracy were 0.31 and 0.55 (ICC 2,k), respectively. Assessment of the direction of tunnel error was good with the fluoroscopic technique slightly more accurate than palpation. ConclusionThis study demonstrated that both palpation and fluoroscopy are valid techniques for assessing femoral tunnel position after MPFL reconstruction. Despite demonstrating good validity, the accuracy of assessing tunnel position was unreliable in a group of six experienced knee surgeons. Further research into MPFL reconstruction femoral tunnel assessment techniques, including patient-specific reference standards, is warranted. Level of EvidenceLevel 2.

Comparison of five different fluoroscopic methods for identifying the MPFL femoral footprint

PurposeThe success of medial patellofemoral ligament (MPFL) reconstruction is closely linked to the precise positioning of the femoral tunnel. Intraoperative fluoroscopy is commonly utilized to identify the MPFL footprint. This study aimed to ascertain the most accurate fluoroscopic method among the five previously described methods used to determine the MPFL femoral footprint.Materials and methodsUsing 44 well-preserved dry femur bones, the MPFL femoral insertion site was demarcated using anatomical bony landmarks, namely the center of the saddle sulcus between the medial epicondyle, adductor tubercle and gastrocnemius tubercle. Fluoroscopic true lateral knee images were acquired and measurements taken, referencing established methods by Schottle et al., Redfern et al., Wijdicks et al., Barnett et al., and Kaipel et al. The distance between anatomic and fluoroscopic MPFL footprints was then measured on digital fluoroscopic images. The accuracy of the locations was compared using a margin of error of 5 and 7 mm.ResultsThe Schottle method consistently emerged superior, showcasing the smallest mean distance (3.2 ± 1.2 mm) between the anatomic and radiographic MPFL footprints and a high in-point detection rate of 90.9% under 5 mm criteria. While the Redfern method displayed perfect accuracy (100%) within the 7 mm criteria, the Schottle method also performed 97.7% accuracy.ConclusionsFor intraoperative identification of the MPFL footprint using fluoroscopy, the Schottle method is the most consistent and accurate among the assessed methods. Thus, its accuracy in detecting the MPFL footprint makes it recommended for MPFLR to ensure optimal outcomes.Level of evidenceLevel IV, cadaveric study.

Training of a deep learning based digital subtraction angiography method using synthetic data.

Digital subtraction angiography (DSA) is a fluoroscopy method primarily used for the diagnosis of cardiovascular diseases (CVDs). Deep learning-based DSA (DDSA) is developed to extract DSA-like images directly from fluoroscopic images, which helps in saving dose while improving image quality. It can also be applied where C-arm or patient motion is present and conventional DSA cannot be applied. However, due to the lack of clinical training data and unavoidable artifacts in DSA targets, current DDSA models still cannot satisfactorily display specific structures, nor can they predict noise-freeimages. In this study, we propose a strategy for producing abundant synthetic DSA image pairs in which synthetic DSA targets are free of typical artifacts and noise commonly found in conventional DSA targets for DDSA modeltraining. More than 7,000 forward-projected computed tomography (CT) images and more than 25,000 synthetic vascular projection images were employed to create contrast-enhanced fluoroscopic images and corresponding DSA images, which were utilized as DSA image pairs for training of the DDSA networks. The CTprojection images and vascular projection images were generated from eight whole-body CT scans and 1,584 3D vascular skeletons, respectively. All vessel skeletons were generated with stochastic Lindenmayer systems. We trained DDSA models on this synthetic dataset and compared them to the trainings on a clinical DSA dataset, which contains nearly 4,000 fluoroscopic x-ray images obtained from different models ofC-arms. We evaluated DDSA models on clinical fluoroscopic data of different anatomies, including the leg, abdomen, and heart. The results on leg data showed for different methods that training on synthetic data performed similarly and sometimes outperformed training on clinical data. The results on abdomen and cardiac data demonstrated that models trained on synthetic data were able to extract clearer DSA-like images than conventional DSA and models trained on clinical data. The models trained on synthetic data consistently outperformed their clinical data counterparts, achieving higher scores in the quantitative evaluation of peak signal-to-noise ratio (PSNR) and structural similarity index measure (SSIM) metrics for DDSA images, as well as accuracy, precision, and Dice scores for segmentation of the DDSAimages. We proposed an approach to train DDSA networks with synthetic DSA image pairs and extract DSA-like images from contrast-enhanced x-ray images directly. This is a potential tool to aid indiagnosis.

Comparison between conventional approach and three-dimensional mapping system in the catheter ablation of accessory pathway associated with coronary sinus diverticulum: A single-center experience.

Posteroseptal accessory pathways (APs) associated with coronary sinus (CS) diverticulum present a rare and challenge for ablation. This study aimed to compare the safety and efficacy of conventional approach and three-dimensional (3D) mapping system in the catheter ablation. This was a retrospective study of all patients (from January 2013 to July 2022) who underwent catheter ablation of posteroseptal AP associated with CS diverticula in our center. Patients who underwent catheter ablation using the traditional fluoroscopy method were included in the conventional method group (n = 13). Patients who underwent catheter ablation using the 3D mapping method were included in the 3D mapping group (n = 11). Clinical characteristics, ablation procedure, and outcomes were recorded and analyzed between the two groups. Out of 669 patients with posteroseptal APs, 24 of them (3.6%) were associated with CS diverticula. All patients in both groups successfully completed the electrophysiological study. In the conventional method group, two patients experienced complications (one patient with pericardial effusion and the other patient with femoral arterial hematoma), and two patients had recurrence. However, no patients suffered from complications or recurrence during follow-up. The procedure time and fluoroscopy time in the conventional method group were significantly longer than those in the 3D mapping method group. The utilization of 3D mapping led to reduced fluoroscopy time, shorter procedure duration, enhanced acute success rates, and decreased incidence of complications.

Comparative study to measure femoral malrotation in inter-trochanteric femur fracture done by conventional and fluoroscopic method

: Rotational malalignment following intramedullary nailing in intertrochanteric femur fractures is an under recognized complication. The incidence is varied from 17 to 35% as per literature. In this study we used intraoperative fluoroscopic method to assess anteversion angle, incidence of malalignment and to check whether intraoperative fluoroscopy is useful to reduce incidence of rotational malalignment or not. Twenty patients of intertrochanteric femur fracture who presented to hospital between 1 October 2019 to 30 September 2020 were divided in two groups of 10 patients each. Group 1 was operated with intraoperative fluoroscopic method and group 2 operated by conventional method of intramedullary nailing. Alignment measured as angle of anteversion by post-operative CT scan and comparison between two groups was done.: The incidence of rotational malalignment was 15%. Three patients had significant difference of 15° in anteversion angle compared to opposite normal femur. All these three malalignments were seen in the fluoroscopic group 1 and had unstable fracture patterns. Unstable fracture patterns are at increased risk of rotational malalignment. In intra operative fluoroscopic method distal femur posterior condylar axis is taken in to consideration. Most of the elderly people have some degree of fixed flexion deformity of the knee due to arthritic changes. This requires more internal rotation to achieve straight posterior condylar axis. This may be the reason for internal rotation malalignment in the fluoroscopic method.

Zero to minimal fluoroscopy for cardiac electronic device implantation: A systematic review and meta-analysis.

Fluoroscopy is conventionally performed for cardiac implantable electronic device (CIED) therapy and carries radiation drawback for both patients and medical workers. Recently, zero to minimal fluoroscopy (ZMF) approach is introduced to reduce radiation exposure of fluoroscopy. This study compares the feasibility and safety of ZMF approach to fluoroscopy for CIEDs therapy in adults. A systematic literature search was conducted on PubMed, ScienceDirect, and Web of Science in March 2023. All observational or experimental studies comparing ZMF approach to fluoroscopy for adult CIEDs therapy were included. Reviews, case report/series, animal studies, and non-English articles were excluded. The success rate, procedural time, fluoroscopy time, radiation dose, and complications rate were compared for each approach. Seven articles for permanent and three articles for temporary CIEDs were included for analysis. The success rate of ZMF for permanent CIEDs was similar to fluoroscopy method (OR: 0.77, 95% CI: 0.33-4.15). The procedural time of ZMF was similar to fluoroscopy for both permanent and temporary CIEDs (standardized mean difference [SMD]: 0.10, 95% CI: -0.35 to 0.55 and SMD: -0.71, 95% CI: -1.87-0.44, respectively). However, ZMF approach markedly reduced the fluoroscopy time and radiation exposure for permanent CIEDs (SMD: -1.80, 95% CI: -2.49 to -1.12 and SMD: -1.26, 95% CI: -2.24 to -0.29). The complication rate was similar for permanent CIEDs (OR: 1.08, 95% CI: 0.41-2.84), yet lowered for temporary CIEDs (OR: 0.34, 95% CI: 0.20-0.59). ZMF had similar success rate, procedural time, and sum complication rate for permanent CIEDs implantation with a significant reduction of fluoroscopy time and radiation exposure.

Ultrasound-guided transforaminal epidural injection with fluoroscopy confirmation for the treatment of unilateral lumbar radiculopathy: A randomized controlled non-inferiority study

BackgroundUltrasound (US)-guided injections for chronic pain has multiple advantages over traditional radiologic method. The study was performed to exam the clinical outcomes of lumbar transforaminal epidural injection (LTFEI) between US and fluoroscopy (FL) guidance for lumbar radiculopathy (LRP). MethodsA total of 164 patients with LRP were randomly assigned into US and FL group to receive LTFEI in a 1:1 ratio. Pain relief and functional disability were assessed by numeric rating scale (NRS) and Modified Oswestry Disability Questionnaire (MODQ) scores before treatment, 1 month and 3 months post-intervention. Contrast spread pattern, fluoroscopic image number and complications were also recorded. The primary outcome was accurate rate of contrast dispersing into lumbar epidural space, and non-inferiority margin was predefined at −15 %. ResultsThe accuracy of LTFEI was 90.2 % and 91.5 % in US and FL group, and the lower limit of the 95 %CI of mean difference between two modalities (−4.9 % (95 %CI: −12.8 %, 3.1 %)) was above the non-inferiority margin. Procedure time in US group (531.90 ± 67.12 s) was shorter than FL group (904.20 ± 120.20 s) (p < 0.05), while radiation dosage in the US group was lower than in the FL group (3047.20 ± 569.53 vs. 8807.50 ± 1039.10 μGy m2, p < 0.001). Both groups didn’t differ in pain reduction (F = 1.050, p = 0.306) and functional improvement (F = 0.103, p = 0.749) during follow-up period. No severe complications occurred in both groups. ConclusionsUS-guided LTFEI confirmed by FL was not inferior to conventional FL method in terms of accurate rate of lumbar epidural contrast dispersion. Effective pain relief and functional ability improvement were comparable between two modalities, and US technique had advantages of less radiation exposure and possible facilitation of avoiding critical vessels around intervertebral foramen.

Assessment of Intraoperative Rotational Alignment of Closed Locked Intramedullary Nailing for Humerus Fractures.

Intramedullary nailing of humerus fractures has evolved over the past half century and has grown in popularity especially for the polytraumatized patient. The importance of restoring appropriate rotational alignment is equivalent to that of restoring sagittal and coronal alignment to decrease the risk of shoulder degenerative changes and limit range of motion discrepancy from the contralateral limb. This technique is designed to introduce an intraoperative fluoroscopic method to obtain adequate rotational alignment of humeral shaft fractures treated with closed antegrade humeral locked nailing.

Application of the pedicle axis view in percutaneous screw placement for type III fracture dislocation of the sacroiliac joint

AimTo investigate the clinical application of axial view projection of the pedicle in percutaneous screw placement for type III fracture dislocation of the sacroiliac joint.MethodsPercutaneous sacroiliac screw fixation was performed in 29 patients with type III sacroiliac joint fractures under X-ray fluoroscopy (C-arm) using axial view projection of the pedicle after preoperative traction reduction and preoperative preparation. The study included 19 males and 10 females, aged 20 to 75 years old, with a mean age of 42.1 ± 3.4 years.ResultsThe total operative time ranged between 44 and 135 min, with a mean of 95.5 ± 9.4 min. The intraoperative fluoroscopy time ranged between 15 and 42 s, with a mean of 25 ± 4.7 s. The intraoperative blood loss ranged between 5 and 10 ml, with a mean of 7.1 ± 1.3 ml. According to the Matta scoring system, excellent outcomes were achieved in 25 cases, whereas good outcomes were achieved in 4 cases. Based on the definition by Neo et al., pedicle screw positions were categorized into four grades: grade 0 (33 screws), grade I (2 screws), grade II (2 screws), and grade III (0 screws). Excellent outcomes were achieved in 94.6% of Grade 0 and I screws. According to Majeed’s functional score, 21 cases achieved excellent outcomes, whereas 8 cases achieved good outcomes. The 29 patients were followed between 3 and 18 months, with a mean of 7.1 ± 1.2 months. All patients achieved anatomical reduction with accurate screw placement and successful healing of their fractures, with no cases of bone penetration or neurovascular injury.ConclusionAxial view imaging of the pedicle using fluoroscopy is a convenient and rapid fluoroscopy method for percutaneous screw placement for type III fracture dislocation of the sacroiliac joint, with a high rate of success, good safety, and short fluoroscopy time.

Clinical application of special fluoroscopy method in the treatment of distal radius fractures with volar locking plate

The relationship between the distal screws and the wrist articular surface was assessed by the additional lateral oblique fluoroscopic view during the operation, and the dorsal tangential view of the wrist was used to observe whether the distal screw penetrated the dorsal cortex, so as to evaluate the clinical efficacy of the volar locking plate in the treatment of distal radius fractures. From January 2020 to June 2021, 45 cases of fresh distal radius fractures were treated using the volar Henry's approach, including 20 males and 25 females, aged from 32 to 75 years old with an average of (52.4±8.1) years old. During the operation, they were divided into 2 groups according to the different intraoperative fluoroscopic views:the control group of 20 cases, treated with standard anteroposterior and lateral fluoroscopic view;25 cases in the observation group, additional lateral oblique fluoroscopic view and dorsal tangential view of the wrist were taken. The wrist joint function score and postoperative complications were evaluated at 6 weeks, 3 and 6 months after operation between two groups. All 45 patients were followed up and the duration ranged from 6 to 14 months, with an average of (10.8±1.7) months, all patients achieved bone union and the incision healed well. The incidence of postoperative complications in the observation group was lower than that in the control group, and the difference was statistically significant (P<0.05). In terms of Gartland-Werley score of wrist joint function, the score of wrist function in the observation group was (4.58±1.31) at 6 weeks, (2.98±0.63) at 3 months and (1.95±0.65) at 6 months post-operatively, which were better than those in the control group (6.32±1.96) at 6 weeks, (3.63±0.76) at 3 months and (2.43±0.73) at 6 months. The difference was statistically significant (P<0.05). In the observation group, 7/25 cases(28%) were found to have screw penetration during the operation by additional lateral oblique and dorsal tangential radiograph fluoroscopic views of wrist. The addition of lateral oblique and dorsal tangential during the operation could improve the accuracy of distal screw placement, reduce postoperative complications, and achieve early functional exercise.

Fluoroscopic Categorization of Cementless Acetabular Component Positioning.

The purpose of this study was to evaluate a fluoroscopic method of angle of lateral opening (ALO) categorization based on identification of the visible portion of a pre-existing, circular recess within the metal shell of the BioMedtrix BFX acetabular component, which projects as an ellipse at clinically relevant ALO values. Our hypothesis was that there will be an association between the actual ALO and the categorization of ALO based on identification of the visible portion of the elliptical recess on a lateral fluoroscopic image at clinically relevant values. A custom plexiglass jig was fitted with a two-axis inclinometer and a 24 mm BFX acetabular component attached to its tabletop. Fluoroscopic reference images were obtained with the cup positioned at an ALO of 35, 45 and 55 degrees with a fixed 10 degrees of retroversion. Thirty study fluoroscopic images (10 images at each ALO) were obtained based on randomization at an ALO of 35, 45 and 55 degrees (±0.5 degrees) with 10 degrees of retroversion. The order of the study images was randomized, and a single, blinded observer categorized the 30 study images as representing an ALO of 35, 45 or 55 degrees by comparison to the reference images. Analysis showed perfect (30/30) agreement with a weighted kappa coefficient of 1 (95% confidence interval: -0.717 to 1). The results demonstrate that accurate categorization of ALO can be achieved using this fluoroscopic method. This method may prove to be a simple but effective method of estimating intraoperative ALO.

Validation of a machine learning technique for segmentation and pose estimation in single plane fluoroscopy.

Kinematics of total knee replacements (TKR) play an important role in assessing the success of a procedure and would be a valuable addition to clinical practice; however, measuring TKR kinematics is time consuming and labour intensive. Recently, an automatic single-plane fluoroscopic method utilizing machine learning has been developed to facilitate a quick and simple process for measuring TKR kinematics. This study aimed to validate the new automatic single-plane technique using biplanar radiostereometric analysis (RSA) as the gold standard. Twenty-four knees were imaged at various angles of flexion in a dedicated RSA lab and 113 image pairs were obtained. Only the lateral RSA images were used for the automatic single-plane technique to simulate single-plane fluoroscopy. Two networks helped automate the kinematics measurement process, one segmented implant components and the other generated an initial pose estimate for the optimization algorithm. Kinematics obtained via the automatic single plane and manual biplane techniques were compared using root-mean-square error and Bland-Altman plots. Two observers measured the kinematics using the automated technique and results were compared with assess reproducibility. Root-mean-square errors were 0.8 mmfor anterior-posterior translation, 0.5 mmfor superior-inferior translation, 2.6 mm for medial-lateral translation, 1.0° for flexion-extension, 1.2° for abduction-adduction, and 1.7° for internal-external rotation. Reproducibility, reported as root-mean-square errors between operator measurements, was submillimeter for in-plane translations and below 2° for all rotations. Clinical Significance: The advantages of the automated single plane technique should aid in the kinematic measurement process and help researchers and clinicians perform TKR kinematic analyses.

A simple method of axillary venipuncture using single landmark for pacemaker leads implantation

Background Axillary venipuncture for pacemaker lead implantation has been demonstrated to be an effective method without fatal complications encountered with standard subclavian access approach, but the relatively high complexity limits its clinical practicability. Objective We are proposing a simple technique for axillary venipuncture using single point on clavicle as anatomical landmark with the possibility of alternative fluoroscopic assisted puncture as a backup. Methods Connecting point of medial to middle third of clavicle is located as the landmark. Deflected lateral 45°from sagittal line, an 18-guage needle tip is laid on the point and tangential to upper border of clavicle. Penetrated from the hub site, the needle is directed to the landmark at approximately 30–45° relative to body surface for venipuncture. If blind puncture failed, an alternative fluoroscopic method is performed. Upon successful venipuncture, a guide wire is positioned in inferior vena cava and a skin incision and subcutaneous pocket is made at the puncture site. Results Axillary vein puncture was successful for 106 of 113 patients (93.8%) in the study with mean access time of 3.6 ± 1.4 min. In 84 patients (74.3%), the vein was cannulated by blind puncture, and fluoroscopy guided method was required in other 22 patients (19.5%). The puncture of axillary artery occurred in one patient (0.09%) and no haemorrhage was observed after local pressure. No pneumothorax, hemothorax, or brachial plexus injury was found. Conclusions The approach of axillary vein puncture using single landmark on the clavicle is simple, effective and safe for pacemaker lead implantation.

Intracardiac echocardiographically guided permanent pacemaker implantation is a feasible imaging tool with comparable procedural efficacy and safety

Abstract Background Amongst cardiovascular interventions, pacemaker implantation procedure is one of the most hazardous in terms of radiation exposure due to its proximity and unprotected radiation exposure. In order to reduce radiation hazards, alternative imaging tool to guide pacemaker implantation should be sought. The aim of this study is to investigate the feasibility, efficacy, and safety of intracardiac echocardiographically (ICE) guided pacemaker implantation. Methods We retrospectively investigated pacemaker implantation with ICE guidance. ICE catheter was placed in right atrium (RA). Right ventricular (RV) lead was placed in RV apex within home view (low RA, 2-4 O'clock). Then RA lead was placed in RA appendage within mid RA 1-2 O'clock view. Fluoroscopy was used only for verifying lead redundancy (2 or 3 second duration before pocket closure). Other procedure steps were similarly performed as in conventional fluoroscopic method. Radiation dosage, patient safety, total procedure time, and lead parameters were assessed and compared. Results From June 2013 to March 2021, a total of 270 patients underwent pacemaker implantation either with ICE or with fluoroscopy. Amongst them, ICE guided implantation was attempted in 35 patients. In order to exclude potential bias caused by the operator's learning curve, we excluded early 5 cases out of ICE group. Radiation exposure was markedly decreased within ICE group (2.3±4.4 Gy cm2 in ICE group vs. 27.2±50.5 Gy cm2 in fluoroscopy group, P&amp;lt;0.001). The total procedure time and complication rate showed no significant difference between groups. In ICE group, atrial lead parameters were better than those of fluoroscopy group (impedance 454±57 Ω vs. 533±125 Ω, P&amp;lt;0.001). Conclusion In 30 patients with ICE guided pacemaker implantation, radiation exposure was markedly decreased without any trade-offs in terms of patients' safety and procedural success. Furthermore, operation team members' physical stress reduction also might be potentially guaranteed. Funding Acknowledgement Type of funding sources: None.

Axial and frontal X-ray fluoroscopy technique of the sustentaculum tali can improve the accuracy of sustentacular screw placement

IntroductionCalcaneal fractures, especially those involving the articular surface, should be anatomically reduced as much as possible. Fixing the fracture by placing a screw into the sustentaculum tali from the lateral side of the calcaneus is generally considered to be the key to successful surgery. However, due to the limited visibility during surgery, it is not easy to place screws into the sustentaculum tali accurately. The purpose of this study was to explore a new fluoroscopy method for the sustentaculum tali and verify the value of this method in improving screw placement accuracy.MethodsIn this study, a total of 42 human foot and ankle specimens were dissected and measured. The shape and position of the sustentaculum tali were observed, and the influence of adjacent bones on imaging findings was analysed. The axial and frontal X-ray fluoroscopy method to view the sustentaculum tali was formulated, and the appropriate projection angle through anatomical and image measurements was explored. Thirty specimens were randomly selected for screw placement, and the direction of the screw was dynamically adjusted under the new imaging method. The success rate of sustentacular screw placement was evaluated.ResultsThe anteversion angles of the sustentaculum tali were 30.81 ± 2.21° and 30.68 ± 2.86° by anatomical and imaging measurements, respectively. There was no statistically significant difference in the anteversion angle between the two measurement methods. Harris heel views should be obtained at 30° to identify the sustentaculum tali on axial X-ray images. Frontal X-ray imaging was performed perpendicular to this projection angle. Through frontal and axial X-ray imaging, the position and shape of the sustentaculum tali can be clearly observed, and these factors are seldom affected by adjacent bones. Under the new fluoroscopy method, the screws were placed from the anterior region of the lateral wall of the calcaneus to the sustentaculum tali. A total of 60 screws were placed in the 30 specimens; of these, 54 screws were in good position, 2 screws penetrated the cortical bone, and 4 screws did not enter the sustentaculum tali. The success rate of sustentacular screw placement was 90% (54/60).ConclusionsAxial and frontal X-ray images of the sustentaculum tali can clearly show the shape of the structure, which improves sustentacular screw placement accuracy.

Flouroscopic versus conventional epidural blood patch in obstetrics: A retrospective cohort study.

Epidural blood patch is a common effective treatment for postdural puncture headache after accidental dural puncture during labor and may be done in conventional or fluoroscopy-guided methods. The aim of this study was to compare intensity of headache at the time of discharge from the hospital and to compare blood volumes injected in conventional epidural blood patches versus fluoroscopic-guided blood patches and evaluate the side effects of both method of treatment. Between the years 2010 and 2020, 84 patients who were diagnosed with postdural puncture headache received either a conventional epidural blood patch or a fluoroscopic-guided blood patch. Blood volumes were compared and evaluation of side effects was made based on data collected during and after the procedure. Eighty-four patients were included in this study. Fifty-two women in the conventional epidural blood patch group and 32 in the fluoroscopic-guided blood patch group. Women in the conventional epidural blood patch group received statistically significantly higher doses of blood than women in the fluoroscopic-guided blood patch group: conventional method 29ml IQR [23-36] versus fluoroscopic method 16ml, IQR [12-18], p<.001 with no difference in headache pain intensity at hospital release. There was no difference between groups in hospital length of stay, or persistent PDPH. There was also no difference chronic headache or backache between the two groups. Women who received fluoroscopic epidural blood patch required a much lower volume of blood injected while there was no difference between groups in headache pain intensity at discharge.

Peritoneal Dialysis Catheter Placement: Percutaneous and Peritoneoscopic Techniques.

Chronic peritoneal dialysis (PD) is an underutilized renal replacement therapy in treating end-stage renal disease that has several advantages over hemodialysis. The success of continuous ambulatory PD is largely dependent on a functional long-term access to the peritoneal cavity. Several methods have been developed to place the PD catheter using both surgical and percutaneous techniques. The purpose of this article is to describe the percutaneous techniques using fluoroscopy guidance and peritoneoscope method. While fluoroscopic method uses fluoroscopy guidance and a guidewire to place the PD catheter, the peritoneoscopic technique utilizes a needlescope to directly visualize the peritoneal space to avoid adhesions and omentum during catheter placement. These percutaneous approaches are minimally invasive procedures that can be performed on an outpatient basis without the need for general anesthesia.