Fluoroscopic Control Research Articles

Comparative study between the halfway technique and the standard technique for exchange of tunneled hemodialysis catheter.

When indicated, tunneled hemodialysis catheters are usually inserted using the standard technique but, this technique has its complications. The halfway method is performed by exchange of an already-inserted dialysis catheter (tunneled or non-tunneled) to a tunneled one over a guidewire mounted via the old catheter. In this study, we aimed at evaluating the feasibility, safety, and durability of halfway method in comparison to the standard technique (de novo puncture). This prospective study was conducted during the period from May 2020 till May 2022 and included 87 patients with end-stage renal disease (ESRD) on regular hemodialysis (HD) in need for insertion new tunneled dialysis catheters instead of temporary or malfunctioning tunneled ones. According to the technique of catheter insertion, these patients were divided into two groups: group A (the halfway technique: catheters were exchanged over guidewires under fluoroscopic control; 48 patients) and group B (the standard technique: via de novo ultrasound-guided vein puncture; 39 patients). Instant, delayed complications and 12-months patency rates were reported and analyzed. The frequency of peri-operative bleeding complications was better in the halfway group with comparable infection rate and late catheter dysfunction results between the two groups. One year patency rates were 87.5% in halfway technique group compared to 79.5% in standard technique group, yet without statistical significance. However, there was a statistically significant shorter operative time in halfway group (15.54 ± 2.6 min vs 26.97 ± 5.6 min, p < 0.001). The halfway technique may be recommended over the standard technique of tunneled catheter insertion due to shorter operative time, lower rate of hematoma formation, with non-inferior 1-year patency rates and comparable technical success and infection rates. The advantage of access sites preservation for future demand makes this technique of great value to this group of ESRD patients.

Alignment rod and gap measurement methods achieve comparable alignment correction in opening wedge high tibial osteotomy for varus osteoarthritic knees.

To compare clinical and radiological outcomes of medial opening wedge high tibial osteotomy (MOWHTO) using two different alignment methods: the alignment rod (AR) versus the gap measurement (GM) method. The primary outcome was to report the surgical accuracy of coronal plane corrections in each method. Patients who underwent MOWHTO with either AR or GM method between 2014 and 2022 at a single institution, with a minimum of 2 years of follow-up, were included. The opening gap was gradually spread with an AR under fluoroscopic control in the AR group, whereas the osteotomy site was opened to the value of the measured gap distance in addition to the thickness of the bone saw in the GM group. Radiological assessment of geometric characteristics included hip-knee-ankle angle (HKA), medial proximal tibial angle (MPTA), mechanical lateral distal femoral angle and joint line convergence angle. Surgical accuracy, which is the deviation (Δ) between the intended and achieved correction, was compared between both methods. Clinical outcomes were assessed using the Knee Injury and Osteoarthritis Outcome Scores. A total of 110 patients (n = 110 knees) with a mean age of 54.1 ± 8.4 years were included in the study. Radiological parameters were significantly improved as reflected by HKA correction from 171.6° ± 2.0° to 181.1° ± 2.6° in the AR group and from 171.0° ± 2.3° to 181.1° ± 2.8° in the GM group at 2 years (Intergroup n.s). There was no significant intergroup difference for all radiological parameters and clinical outcomes. There was no intergroup difference in the surgical accuracy as evaluated by Δvalues and absolute Δvalues of both HKA and MPTA (n.s). Comparable correction accuracy was achieved in MOWHTO using either the AR or GM method. The GM method is simple and reliable in achieving the intended correction in MOWHTO. Ⅲ retrospective comparative study.

Development of the humeral head offset index for control of humeral torsion

BackgroundControl of humeral torsion can present a challenge, especially intraoperatively during closed reduction and fixation of humeral shaft fractures or 2-part surgical neck fractures of the proximal humerus. The objective of this study is to develop and validate an indirect method for the assessment of humeral torsion using an index that is linearly correlated with rotational arm position and can be derived from only a single plain radiographic image of the proximal humerus.MethodsThe Humeral Head Offset Index (HHOI) is calculated as the ratio of the medial and lateral offset of the humeral head measured from the outer cortices of the shaft on a plain radiographic or fluoroscopic image. The relationship of HHOI with humeral torsion was first verified on a sawbone model with radiopaque characteristics under fluoroscopic control. Different degrees of retroversion were simulated through manual rotation of the humerus with a digital protractor in 5° increments until 40° internally rotated and then in 5° increments until 40° externally rotated from the neutral position. The same procedure was subsequently performed digitally on Digitally Reconstructed Radiographs (DRRs) from computed tomography (CT) dataset of the sawbone. Next, the HHOI index was applied to eight randomly selected patients with total humerus CT using the same method. Spearman’s rho was calculated for the bivariate analysis of correlation between the simulated degree of retroversion and the HHOI. Strength of correlation was classified according to Koo and Li. Interrater and intrarater reliability of three blinded observers with repetition of measurement after three months were analyzed by assessing the intraclass correlation coefficient (ICC).ResultsBoth in the sawbone model and in DRRs, we demonstrated a high to very high significant linear correlation between simulated retroversion and the HHOI. ICC values demonstrated excellent interrater reliability and excellent intrarater reliability for measurement of the HHOI.ConclusionsThe HHOI is a new, simple, reliable index that has a linear relationship to the rotation of the humerus and can therefore allow an indirect control of humeral torsion in comparison to the contralateral side.

Non-invasive follow-up for intracranial aneurysms treated with contour neurovascular system-comparison of digital subtraction angiography (DSA) to magnetic resonance imaging (MRI) and spectral computed tomography angiography (CTA) in vitro.

The contour neurovascular system (CNS) is an intrasaccular flow-disrupting device designed for the treatment of intracranial wide-necked bifurcation aneurysms. Metal artifacts limit magnetic resonance imaging (MRI) accessibility after implantation. The purpose of this in vitro study was to evaluate non-invasive imaging alternatives to digital subtraction angiography (DSA). Three aneurysms of patients originally treated with CNS were three-dimensional (3D)-printed (one at the basilar tip and two at the middle cerebral artery bifurcation). CNS devices were implanted under fluoroscopic control into the 3D models. Post-implantation two-dimensional-DSA, flat panel computed tomography angiography (CTA), MRI, and spectral CTA were performed. Time of flight angiography and T1 weighted sequences showed large susceptibility artifacts at the detachment zone of the devices. A thin-sliced T2 weighted sequence in cross-sectional orientation to the aneurysm allowed visualization of the aneurysm dome, but the aneurysm neck and parent vessel could not be assessed. Focused spectral CTA, especially a 40 keV reconstruction with a metal artifact reduction algorithm (orthopedic metal artifact reduction (OMAR)), showed only minor artifacts at the detachment zone. This approach achieved a very similar result to DSA and flat panel computed tomography, enabling the assessment of the device structure, aneurysm perfusion, and parent vessel perfusion. For non-invasive follow-up of CNS, focused 40 keV CTA with OMAR seems to be a valuable option. MRI can be valuable for larger aneurysms to assess the aneurysm dome, but was not suitable for evaluating the parent vessels and aneurysm neck after CNS implantation in this study.

Arthroscopic-Controlled Reduction of Hill-Sachs Lesions: Treatment Option for Off-Track Lesions in Young Patients?

Large Hill-Sachs lesions (HSL) are currently treated via a remplissage procedure. Although the good stabilizing properties of this surgery are apparent, there are some disadvantages in terms of the functional outcome. In the following Technical Note, we present a method of arthroscopic-controlled reduction of HSL for anatomical restoration of the humeral head without functional limitations. For HSL reduction, we place a 1.6-mm K-wire in the central lesion under arthroscopic and fluoroscopic control from posterior to anterior in lateral drilling direction. Then, a 7-mm cannulated drill is used for preparing the reduction canal. Afterward, the HSL is reduced via bone tamp, also under arthroscopic and fluoroscopic control. No bone substitution material is used to fill the canal; only a standard wound closure is performed. Arthroscopic-controlled reduction of impacted humeral head fractures seems to be a possible and relatively easy way to perform an anatomical restoration of HSLs. Because the exact location of HSLs can vary slightly, the exact surgical setting might be slightly different each time. Biomechanical studies already show similar stabilizing properties of this procedure compared with established techniques but without losing external rotation. Further studies need to review the potential rate of humeral head necrosis or secondary loss of reduction.

Intraoperative fluoroscopy skills in distal radius fracture surgery: valid and reliable assessment on a novel immersive virtual reality simulator.

Orthopedic trainees must be able to perform intraoperative fluoroscopy imaging to assess the surgical result after volar locking plate surgeries of distal radius fractures. Guided by Messick's contemporary validity framework, the aim of our study was to gather evidence of validity for a test of proficiency for intraoperative imaging of a distal radius fracture using a novel immersive virtual reality simulator. 11 novices and 9 experienced surgeons employed at orthopedic departments completed 2 individual simulator sessions. At each session the participants performed 3 repetitions of an intraoperative fluoroscopic control of a distal radius fracture, consisting of 5 different fluoroscopic views. Several performance metrics were automatically recorded by the simulator and compared between the 2 groups. Simulator metrics for 3 of the 5 fluoroscopic views could discriminate between novices and experienced surgeons. An estimated composite score based on these 3 views showed good test-retest reliability, ICC = 0.82 (confidence interval 0.65-0.92; P < 0.001). A discriminatory standard was set at a composite score of 6.15 points resulting in 1 false positive (i.e., novice scoring better than the standard), and 1 false negative (i.e., experienced surgeon scoring worse than the standard). This study provided validity evidence from all 5 sources of Messick's contemporary validity framework (content, response process, internal structure, relationship with other variables, and consequences) for a simulation-based test of proficiency in intraoperative fluoroscopic control of a distal radius fracture fixated by a volar locking plate.

Micro-robotic percutaneous targeting of type II endoleaks in the angio-suite

PurposeEndovascular aneurysm repair has emerged as the standard therapy for abdominal aortic aneurysms. In 9–30% of cases, retrograde filling of the aneurysm sac through patent branch arteries may result in persistence of blood flow outside the graft and within the aneurysm sac. This condition is called an endoleak type II, which may be treated by catheter-based embolization in case of continued sac enlargement. If an endovascular access is not possible, percutaneous targeting of the perfused nidus remains the only option. However, this can be very challenging due to the difficult access and deep puncture with risk of organ perforation and bleeding. Innovative targeting techniques such as robotics may provide a promising option for safe and successful targeting.MethodsIn nine consecutive patients, percutaneous embolization of type II endoleaks was performed using a table-mounted micro-robotic targeting platform. The needle path from the skin entry to the perfused nidus was planned based on the C-arm CT image data in the angio-suite. Entry point and path angle were aligned using the joystick-operated micro-robotic system under fluoroscopic control, and the coaxial needle was introduced until the target point within the perfused nidus was reached.ResultsAll punctures were successful, and there were no puncture-related complications. The pre-operative C-arm CT was executed in 11–15 s, and pathway planning required 2–3 min. The robotic setup and sterile draping were performed in 1–2 min, and the alignment to the surgical plan took no longer than 30 s.ConclusionDue to the small size, the micro-robotic platform seamlessly integrated into the routine clinical workflow in the angio-suite. It offered significant benefits to the planning and safe execution of double-angulated deeply localized targets, such as type II endoleaks.

Utilization of a novel patient-specific 3D-printing template for percutaneous endoscopic transforaminal discectomy: results from a randomized controlled trial.

The learning curve for percutaneous endoscopic transforaminal discectomy (PETD) is steep, especially for the puncturing and localization procedures. The implementation of 3D printing technology may solve this problem. A novel individualized 3D-printing template (3D-PT) was designed and utilized in PETD. A prospective randomized controlled trial was performed. A total of 28 patients with lumbar disc herniation treated with PETD were analyzed. Of these, 14 patients were treated with the assistance of 3D printing technology (3D-PT group) in conjunction with fluoroscopy, while the remaining 14 patients were treated exclusively under the guidance of C-arm fluoroscopy (control group). The number of puncture attempts in the 3D-PT group was significantly less than in the control group (1.36 ± 0.63 vs. 6.07 ± 3.08, p = 0.000). The 3D-PT group exhibited a significant reduction in both intraoperative puncture fluoroscopies (2.71 ± 1.27 vs. 12.14 ± 6.15, p = 0.000) and the overall number of fluoroscopies (2.71 ± 1.27 vs. 17.43 ± 6.27, p = 0.000). In the 3D-PT group, there was a significant reduction in both the puncture time (5.77 ± 1.82 vs. 13.99 ± 4.36, p = 0.000) and the total operation time (60.39 ± 9.78 vs. 76.25 ± 17.78, p = 0.007). Complications were not observed in either group. The application of the novel individualized 3D-PT for PETD is effective and safe. The technique has substantial potential and is worth widely promoting.

Using ICG navigation in resection of a horseshoe kidney

BACKGROUND: In this publication, we present a new area of application of indocyanine green (ICG) imaging in pediatric surgery. We used this advanced method to evaluate the resection margins of a functional segment of the horseshoe kidney after intravenous indocyanine green. CLINICAL CASE DESCRIPTION: The article presents a case of treatment of a horseshoe kidney complicated by vesicorenal reflux in the left segment and loss of function of the left segment. Resection of the left half of the horseshoe kidney was performed using fluoroscopic control with intravenous administration of indocyanine green. The surgery was performed using the RUBINA™ endovideosurgical system manufactured by KARL STORZ (Germany). RUBINA™ components offer a variety of ICG in near-infrared fluorescence signal imaging modes. Depending on the surgeon and the application, ICG in near-infrared fluorescence data can be used in different modes: image overlay mode, backup mode, color mapping mode. After confirming the boundaries of the perfused part of the kidney, laparoscopic resection of the functional half was performed at the level of the isthmus. The use of ICG imaging was very important in identifying healthy tissue that stained intensely green 2 minutes after intravenous indocyanine green administration. This margin check verifies the functioning renal parenchyma and allows the correct selection of the nephrectomy margin. The next day after the operation, an ultrasound examination of the renal remnant and perinephric space was performed — the rotation to the right hour of the horseshoe-shaped kidney was good and no accumulation of fluid was detected in the bed of the removed segment. A control ultrasound examination 6 months after the operation showed the preservation of the parenchyma of the right half of the kidney, which indicates the positive effect of the surgical procedure. CONCLUSION: ICG navigation is a promising method for noninvasive assessment of resection margins in patients with horseshoe kidneys.

Endomyocardial Biopsy of Heart Tumors under Cone-Beam Computed Tomography Control

Tumors of the heart are rare entities characterized by the absence of specific signs and symptoms. A biopsy is necessary for verify the diagnosis and determine the most correct treatment tactics. Endomyocardial biopsy (EMB) is a modern and relatively safe approach for biopsy of cardiac tumors. Usually this procedure performs under the control of fluoroscopy and echocardiography (intracardiac, transthoracic, transesophageal). However, this procedure is rarely used in patients with suspected cardiac malignancy.We present two clinical cases of endomyocardial biopsy of cardiac tumors by the endovascular approach under the control of cone-beam computed tomography (CBCT). The biopsy was successful in both cases and pathological diagnosis was established.

Long-term experiences with high-energy shock wave therapy in the management chronic phase Peyronie’s disease using two different electromagnetic lithotripters

BackgroundExtracorporeal shock wave lithotripsy represents one option for the non-surgical management of Peyronie’s disease. Despite promising results, several questions are still pending. We want to present the long-term results of a retrospective study using high-energy extracorporeal shock wave lithotripsy.Material and methodsWe evaluated retrospectively 110 patients treated between 1996 and 2020 at the Department of Urology, SLK Kliniken Heilbronn for chronic phase Peyronie’s disease using two electromagnetic lithotripters (Siemens Lithostar Plus Overhead Module, Siemens Lithoskop) applying high-energy shock waves under local anesthesia and sonographic or fluoroscopic control. A standardized questionnaire focused on the change in pain, curvature, sexual function and the need of penile surgery.ResultsIn 85 of the 110 patients (mean age 54 years) we had sufficient data for evaluation. The median follow-up was 228 (6–288) months. There were no significant complications. Pain reduction was achieved in all patients, 65 (76%) patients were free of pain. Improvement of penile curvature was achieved in 43 patients (51%) ranging from 25% improvement (deflected angle < 30°) to 95% (angle 30–60°). 59 patients (69%) reported problems with sexual intercourse, 40 of those (68%) reported improvement. Only 9 (10.5%) patients underwent surgical correction. We did not observe any significant differences between both electromagnetic devices with stable long-term results.ConclusionsHigh-energy shock wave therapy delivered by two standard electromagnetic lithotripters is safe and efficient providing stable long-term results. In cases with significant plaque formation, the concept of high-energy ESWT should be considered in future studies.

Real-time three-dimensional transthoracic echocardiography in quantification of left ventricular dyssynchrony

Aim. To compare endocardial and epicardial left ventricular (LV) pacing using real-time electrocardiography (ECG)-synchronized three-dimensional echocardiography (3DE).Methods. Experimental intraoperative study included 88 points obtained from 12 patients with compensated heart failure of II-IV functional class NYHA (LV ejection fraction &lt; 35%) and cardiac resynchronization therapy indications - ECG pattern of complete left bundle branch block (LBBB) and QRS complex duration &gt; 150 ms. During isolated LV pacing as part of cardiac resynchronization therapy implantation procedure endocardial and epicardial stimulation points matched under fluoroscopic control using quadripolar coronary sinus leads and endocardial electrodes for temporary pacing were obtained. The overall number of corresponding pacing sites included 44 endocardial and 44 epicardial stimulation positions. The mean age of patients was 68.5 [63; 73.5] years, 83% males (n=10). Before study enrollment, 12-channel ECG, echocardiography, and a six-minute walk test were performed for all participants along with cardiac magnetic resonance imaging and control coronary angiography if indicated. The prevalence of coronary heart disease was 50% (n=6) while dilated cardiomyopathy was the most common etiology of chronic heart failure in other cases. Intraoperative ECG with estimation of paced QRS complex morphology at each point was registered via LabSystem Pro Electrophysiological Recording System (Bard Electrophysiology, USA). 3DE was performed using TomTec and Philips Qlab 3DQ Advanced software (Philips Medical Systems, USA).Results. Three-dimensional parametric imaging of LV regional segmental excursion and myocardial contractility using 3DE revealed statistically significant difference in semi-quantative parameters such as ExcAvg (p&lt;0.001), ExcMax (p=0.001), ExcMin (p&lt;0.001) and LV ejection fraction based on 3D modelling (p=0.003) while endocardial pacing was more beneficial. During the course of endocardial stimulation, the 3DE dyssynchrony index estimated at the 2nd stimulation site was also significantly lower (p=0.03). Identical dyssynchrony parameters valid for the 16 and 12-segment 3D models (SDI-16, Tmsv-12SD) (at p=0.06) demonstrated only a tendency for significant difference. The duration of QRS complex at the time of endocardial pacing was significantly shorter (&lt;190 [179;215] ms) (p=0.0008). Semi-quantitative and quantitative 3DE parameters showed the benefit of endocardial pacing resulting in cardiac contractility improvement with less dyssynchrony and LV volume reducing during intraoperative period.Conclusion. Endocardial pacing has potential benefit over the epicardial pacing represented by intraoperative dynamics of LV global and local contractility, intraventricular dyssynchrony estimated by 3DE and also ECG criteria. 3DE is helpful in more precise and reproducibile determing of late activation zone for target LV lead placement that is more manoeuvrable in case of endocardial stimulation.

A Screw Fixation Technique for Calcaneus Fractures: Simplifying Three-dimensional Thinking and Minimal Invasive Surgery

Calcaneus fractures are usually seen in the same pattern of injury, which is characterized by 4 fracture fragments and causes 4 deformities. This article aims to provide a comprehensive guide for the minimal invasive screw fixation method using minimal invasive sinus tarsi incision for calcaneus fractures. The importance of three-dimensional thinking in understanding fracture patterns is emphasized, with suggestions for utilizing computerized tomography scans. The step-by-step surgical procedure is outlined, including reduction maneuvers, fluoroscopic control, and 4 essential x-ray views for accurate assessment. Therefore, it is aimed to identify the proper screw placements for the typical calcaneus fracture fragments. The article concludes by summarizing the presented surgical steps, emphasizing the simplicity and reproducibility of the techniques, and emphasizing the crucial role of three-dimensional thinking in managing calcaneus fractures. Level of Evidence: Level 4, expert opinion.

Role of lateral soft tissues release in percutaneous hallux valgus correction: A medium term retrospective study.

In the field of minimally invasive surgery (MIS) for the treatment of hallux valgus (HV), different techniques have begun to emerge in the literature concerning the distal osteotomy of the first metatarsal bone, the synthesis or not of the metatarsal head, the possible association with lateral soft tissues release (LSTR) and osteotomy of the base of the first phalanx. To evaluate the role of LSTR on percutaneous HV correction, evaluating functional and radiographical results. From January 2012 to May 2016 a total of 396 patients with mild to moderate symptomatic HV treated with the MIS technique were included in this retrospective study. The technique provides no internal fixation (WOS). Patients were divided into the LSTR group and no LSTR group (LSTR N). This surgical procedure (LSTR) was reserved for insufficient HV angle (HVA) correction during fluoroscopic control. Patients were evaluated at each follow-up by two other authors after appropriate training by senior authors (first practitioners). Clinical evaluation was performed before surgery, 6 mo after surgery, and 48 mo follow-up. American Orthopaedic Foot and Ankle Society (AOFAS) and visual analog scale (VAS) score was used to evaluate pain and function, and complications were recorded. In addition, the incidence of relapses and the degree of joint range of motion (ROM) with the association with the LSTR (capsule, adductor tendon, phalanx-sesamoid ligament, and the deep transverse metatarsal ligament) were evaluated. Radiological parameters included HVA and intermetatarsal angle (IMA). Patient satisfaction was assessed. Student t-test and Fisher exact test were used to assess statistical analysis. From our study it is clear that no differences in term of HVA, VAS, IMA correction, rate of complications, and AOFAS score were found between groups, while a significant improvement of the same variables was found in each group between pre and postoperative values. A significant improvement in ROM at 6 mo (P = 0.018) and 48 mo (P = 0.02) of follow-up was found in LSTR N group. Complications were rare in both groups. LSTR procedure on percutaneous HV correction seems to increase postoperative joint stiffness with a comparable incidence of relapse and a low incidence of complications.

Standardized reduction and palmar plating of dorsally displaced distal radius fractures for safe and atraumatic reconstruction of the anatomy of the radius

Standardization of palmar plate osteosynthesis in order to consequently achieve physiologic anatomy of the distal radius end. Unstable dorsally displaced distal radius fractures or fractures that should be treated functionally. Severe intraarticular joint depression that cannot be reduced with either apalmar or arthroscopic assisted approach. Patient in supine position with the forearm supinated on arm table. Radiopalmar incision along the radial border of the flexor carpi radialis tendon. Detachment of the pronator quadratus muscle from radial to ulnar. Gross reduction with eventual correction of adorsal or radial shift. Placement of the angular stable plate and preliminary fixation with anonangular stable cortical screw in the long hole at the radius shaft. Fluoroscopic control of axial alignment in the anteroposterior view and of correct distal position of the plate in the lateral view under reduction condition. Placement of one or two angular stable screws at the shaft. Under subtle reduction with flexion, ulnar deviation and axial traction placement of two K‑wires via the holes at the distal edge of the plate. These wires mostly keep reduction maintained while reduction maneuver can be paused. Fluoroscopic control in two planes. Replacement of the wires by distal angular stable screws with the help of the wires as an orientation. In case of insufficient reduction, reduction maneuver can be repeated while the first angular stable screw is locked. Final fluoroscopic control in two planes and ulnar deviation, eventually also in tangential view and clinical testing for stability of the distal radioulnar joint. Wound closure only by skin suture. Application of asterile dressing and apalmar cast. Arm consequently in upright position and active and complete movement of fingers. Palmar below-elbow cast for 2weeks, then movement of wrist without exertion. After regular radiographic control 4-5weeks postoperatively, increase of axial load to normal and, if needed, physiotherapy. Clinical control for irritation of tendons by plate or screws after 1year and eventual plate removal.

Application of virtual navigation in the treatment of macro-re-entrant atrial tachyarrhythmias

Macro-re-entrant atrial tachyarrhythmias occupy the leading positions in the structure of tachyarrhythmias, and one of the most common in this group is atrial flutter. These abnormal rhythms lead to a significant decrease in the quality of patients’ life, and sometimes, indirectly due to complications, can lead to disability and fatal consequences. Medical treatment for this group of arrhythmias has limited effectiveness, and the surgical method of treatment – catheter ablation – comes to the first place. Ablation of atrial flutter is traditionally performed under the guidance of fluoroscopy without the use of a navigation system, but this is associated with increased radiation exposure to patients and staff. Advances in modern arrhythmology make it possible to create anatomical models of heart chambers and activation models of the excitation spreading along anatomical models, reducing the radiation load, but requiring additional equipment and skills. Aim: to compare the procedure duration and radiation load during radiofrequency catheter ablation of the cavo-tricuspid isthmus using 3D navigation with traditional methods. Materials and methods. The work was based on the analysis of treatment results in 84 patients at National M. Amosov Institute of Cardiovascular Surgery affiliated to National Academy of Medical Sciences of Ukraine in the period from 2014 to 2021. Depending on the imaging method, patients were divided into 2 groups. Group I included 31 patients who underwent radiofrequency cavo-tricuspid isthmus (CTI) ablation according to the traditional method under fluoroscopic control without using a navigation system. Group II comprised 27 patients in whom an anatomical model of the right atrium was created. Results. Success criteria were achieved in all groups, bidirectional block line was created at the level of the CTI. In group I, the average time from the first application to the restoration of sinus rhythm was 325 ± 25 s with an average number of applications of 7.4 ± 0.6 (from 5 to 10). The average procedure time was 43.0 ± 3.3 min, with an average X-ray time of 572 ± 44 s and an average dose area product (DAP) was 62.0 ± 5.0 Gy.cm2. In group II, the total duration of the first stage of the intervention was 312 ± 26 s. The average time to stopping tachycardia and restoring sinus rhythm was 230 ± 19 s. The average time from sinus rhythm restoration to confirmation of bidirectional CTI block was 71 ± 6 s with an average number of applications of 3.2 ± 3.0 per the procedure. The average procedure time was 41.5 ± 3.5 min, the average X-ray time was 120 ± 10 s, the average DAP was 15.0 ± 1.3 Gy.cm2. Conclusions. The usage of the anatomical model of the right atrium reduces X-ray exposure by 75.8 %, in comparison to the traditional technique, during radiofrequency catheter ablation of the cavo-tricuspid isthmus with similar procedure time. The anatomical model can be recommended for ablation of the cavo-tricuspid isthmus.

Percutaneous cementoplasty of periprosthetic aseptic hip loosening

Progressive population aging and improved healthcare have led to a significant increase in patients with hip arthroplasty (HA). In this patient group, the proportion of those who require a new arthroplasty (prosthetic replacement or secondary revision of the hip), has also increased. For this subgroup of patients in whom surgical prosthetic replacement should be considered but is contraindicated, a new technique has been developed since 2010: percutaneous injection of periprosthetic cement under fluoroscopic or CT control ("femoroplasty; FMP") as an alternative and less invasive treatment compared to surgery to stabilize the HA without replacing it, with excellent results on patients' quality of life. In this brief communication, we describe our positive experience regarding FMP, which we have performed for the first time in Spain on four patients (age range between 74–83 years, 2 female and 2 male patients, 3 right HA and 1 left HA), without post-complications. We highlight both the relative simplicity of this technique, which can be incorporated into radiological intervention even in regional hospitals, and the significant clinical improvement observed in all patients. In conclusion, we hope that our experience can contribute to the increased adoption of this innovative technique within the scientific community.

Combined (Ultrasound and Fluoroscopic) Control Performing Mini-percutaneous Nephrolithotomy in Patients with Nephrolithiasis

Combined (Ultrasound and Fluoroscopic) Control Performing Mini-percutaneous Nephrolithotomy in Patients with Nephrolithiasis

Lumbar lateral interbody fusion: step-by-step surgical technique and clinical experience.

Lateral lumbar interbody fusion (LLIF) is a minimally invasive surgical approach used to treat a variety of degenerative and deformity conditions of the lumbar spine such as advanced degenerative disease, degenerative scoliosis, foraminal and central stenosis. It has emerged as an alternative to the traditional posterior and anterior lumbar approaches with some potential benefits such as lower blood loss and shorter hospital stay. In this article, we provide our single institutional surgical experience including main indications and contraindications, a step-by-step surgical technique description, a detailed preoperative imaging assessment with a focus on magnetic resonance imaging (MRI) psoas anatomy, operative room (OR) setup and patient positioning. A descriptive surgical technical note of the following steps is provided: positioning and fluoroscopic confirmation, incision and intraoperative level confirmation, discectomy and endplate preparation, implant size selection and insertion and final fluoroscopic control, hemostasis check and wound closure along with an instructional surgical video with tips and pearls, postoperative patient care recommendations, common approach-related complications, along with our historical clinical institutional group experience. Finally, we summarize our research experience in this surgical approach with a focus on LLIF as a standalone procedure. Based on our experience, LLIF can be considered an effective surgical technique to treat degenerative lumbar spine conditions. Proper patient selection is mandatory to achieve good outcomes. Our institutional experience shows higher fusion rates with good clinical outcomes and a relatively low rate of complications.

Technical Note: Tibial Spine Avulsion Treatment with Arthroscopic Reduction and Internal Fixation with Kirschner Wires in Skeletally Immature Patients.

Tibial spine avulsion injury, tibial eminence injury, tibial spine fracture, and anterior cruciate ligament (ACL) avulsion are multiple terms that express the same pathological condition. It can be encountered both in the pediatric and adult population. A wide array of surgical techniques have been proposed to manage displaced tibial spine avulsions. Anyway, insufficient evidence is currently available to prefer one fixation technique over another, and a gold-standard arthroscopy-based technique is still missing. In this article, we describe a mini-invasive, safe and user-friendly technique for arthroscopic reduction and internal fixation of displaced tibial eminence fractures. Standard and patient-specific accessory arthroscopic portals allow for full access to knee visualization and management of concomitant intraarticular lesions. After performing the debridement of the inflammatory tissue and the release of eventual interposed tissues in the fracture site, the tibial eminence avulsion can be reduced by using a less-invasive bone impactor. With the knee flexed to 90°, the fracture fragments are then synthesized (under fluoroscopic control) with three thin Kirschner wires inserted in a proximal-distal direction in a cross-shaped geometry. This technique allows a fast surgical and hospitalization time, a punctiform arthrotomy, proximal tibial physis preservation, and an early rehabilitation program. This novel technique seems attractive and very promising since it is respectful of the epiphyseal growth plates and is thus suitable for children and adolescents.