Responsive Fluorophores Research Articles

Tetrahedral DNA-Based Ternary Recognition Ratiometric Fluorescent Probes for Real-Time In Situ Resolving Lysosome Subpopulations in Living Cells via Cl-, Ca2+, and pH.

Lysosomes are multifunctional organelles vital for cellular homeostasis with distinct subpopulations characterized by varying levels of Cl-, Ca2+, and H+. In situ visualization of these parameters is crucial for lysosomal research, yet developing probes that can simultaneously detect multiple ions remains challenging. Herein, we developed a lysosome-targeting ternary recognition ratiometric fluorescent probe based on tetrahedral DNA nanostructures (TDNs) to analyze lysosome subpopulations by Cl-, Ca2+, and pH. The TDN probe is assembled from four single-stranded DNAs, each end-modified with responsive fluorophores (Pr-Cl for Cl-, Pr-Ca for Ca2+, and Pr-pH for pH) or a reference fluorophore (Cy5). The fluorophores are integrated at the vertices of the rigid TDN to minimize mutual interference, and their fixed stoichiometry establishes a robust ternary recognition ratiometric fluorescence sensor for in situ resolution of lysosome subpopulations in living cells. Accordingly, a rise in lysosome subpopulations 2/6 characterized by low [Cl-], medium/high [Ca2+], and high pH was observed in the Niemann-Pick disease model cells but seldom observed in the control group. Conversely, there was a marked decline in the fraction of subpopulations 1/4/5 characterized by high [Cl-], medium to low [Ca2+], and pH. These changes were substantially reversed upon treatment. The probe holds great promise for studying lysosome subpopulations and the diagnosis and treatment of related diseases.

Multi-Stimuli-Responsive Fluorescent Molecule with AIE and TICT Properties Based on 1,8-Naphthalimide.

A multi-stimuli responsive fluorophore, named NBDNI, was developed by constructing a 1,8-naphthalimide derivative in which a rotatable electron-donating N,N-dimethylaniline group attached to its 4-position. This molecular structure endowed NBDNI with aggregate-induced emission (AIE) and twisted intramolecular charge transfer (TICT) properties, enabling remarkable fluorescence changes in response to multiple external stimuli: (i) sensitivity to polarity in various solvent systems and polymer matrix; (ii) significant fluorescence response and excellent linearity towards temperature changes in solution; (iii) distinct switch of fluorescence color upon acid and base treatments; (iv) reversible mechanochromism behavior in the solid state. Moreover, the mechanisms underlying the aforementioned stimuli-responsive phenomena have been proposed based on comprehensive systematic measurements. Furthermore, preliminary applications such as fluorescence thermometry and acid/base test paper have been demonstrated. This research will bring about new opportunities for the development of novel stimuli-responsive luminescent materials.

Isomorphic Fluorescent Nucleosides.

In 1960, Weber prophesied that "There are many ways in which the properties of the excited state can be utilized to study points of ignorance of the structure and function of proteins". This has been realized, illustrating that an intrinsic and highly responsive fluorophore such as tryptophan can alter the course of an entire scientific discipline. But what about RNA and DNA? Adapting Weber's protein photophysics prophecy to nucleic acids requires the development of intrinsically emissive nucleoside surrogates as, unlike Trp, the canonical nucleobases display unusually low emission quantum yields, which render nucleosides, nucleotides, and oligonucleotides practically dark for most fluorescence-based applications.Over the past decades, we have developed emissive nucleoside surrogates that facilitate the monitoring of nucleoside-, nucleotide-, and nucleic acid-based transformations at a nucleobase resolution in real time. The premise underlying our approach is the identification of minimal atomic/structural perturbations that endow the synthetic analogs with favorable photophysical features while maintaining native conformations and pairing. As illuminating probes, the photophysical parameters of such isomorphic nucleosides display sensitivity to microenvironmental factors. Responsive isomorphic analogs that function similarly to their native counterparts in biochemical contexts are defined as isofunctional.Early analogs included pyrimidines substituted with five-membered aromatic heterocycles at their 5 position and have been used to assess the polarity of the major groove in duplexes. Polarized quinazolines have proven useful in assembling FRET pairs with established fluorophores and have been used to study RNA-protein and RNA-small-molecule binding. Completing a fluorescent ribonucleoside alphabet, composed of visibly emissive purine (thA, thG) and pyrimidine (thU, thC) analogs, all derived from thieno[3,4-d]pyrimidine as the heterocyclic nucleus, was a major breakthrough. To further augment functionality, a second-generation emissive RNA alphabet based on an isothiazolo[4,3-d]pyrimidine core (thA, tzG, tzU, and tzC) was fabricated. This single-atom "mutagenesis" restored the basic/coordinating nitrogen corresponding to N7 in the purine skeleton and elevated biological recognition.The isomorphic emissive nucleosides and nucleotides, particularly the purine analogs, serve as substrates for diverse enzymes. Beyond polymerases, we have challenged the emissive analogs with metabolic and catabolic enzymes, opening optical windows into the biochemistry of nucleosides and nucleotides as metabolites as well as coenzymes and second messengers. Real-time fluorescence-based assays for adenosine deaminase, guanine deaminase, and cytidine deaminase have been fabricated and used for inhibitor discovery. Emissive cofactors (e.g., SthAM), coenzymes (e.g., NtzAD+), and second messengers (e.g., c-di-tzGMP) have been enzymatically synthesized, using xyNTPs and native enzymes. Both their biosynthesis and their transformations can be fluorescently monitored in real time.Highly isomorphic and isofunctional emissive surrogates can therefore be fabricated and judiciously implemented. Beyond their utility, side-by-side comparison to established analogs, particularly to 2-aminopurine, the workhorse of nucleic acid biophysics over 5 decades, has proven prudent as they refined the scope and limitations of both the new analogs and their predecessors. Challenges, however, remain. Associated with such small heterocycles are relatively short emission wavelengths and limited brightness. Recent advances in multiphoton spectroscopy and further structural modifications have shown promise for overcoming such barriers.

Preparation of complex biological sample-compatible "turn-on"-type ratiometric fluorescent molecularly imprinted polymer microspheres via one-pot surface-initiated ATRP.

The efficient preparation of ratiometric fluorescent molecularly imprinted polymer (MIP) microspheres that can directly and selectively optosense a herbicide (i.e., 2,4-dichlorophenoxyacetic acid, 2,4-D) in undiluted pure milk is described. Thedual fluorescent MIP microparticles were readily obtained through grafting a green 4-nitrobenzo[c][1,2,5]oxadiazole (NBD)-labeled 2,4-D-MIP layer with hydrophilic polymer brushes onto the preformed uniform "living" red CdTe quantum dot (QD)-labeled SiO2 microspheres via one-pot surface-initiated atom transfer radical polymerization (SI-ATRP) in the presence of a polyethylene glycol macro-ATRP initiator. They proved to be highly promising "turn-on"-type fluorescent chemosensors with red CdTe QD (the maximum emission wavelength λe,max around 710nm) and green NBD (λe,max around 515nm) as the reference fluorophore and "turn-on"-type responsive fluorophore, respectively. The sensors showed excellent photostability and reusability, high 2,4-D selectivity and sensitivity (the limit of detection = 0.12μM), and direct visual detection ability (a fluorescent color change occurs from red to blue-green with the concentration of 2,4-D increasing from 0 to 100μM) in pure bovine milk. The sensorswere used for 2,4-D detection with high recoveries (96.0-104.0%) and accuracy (RSD ≤ 4.0%) in pure goat milk at three spiking levels of both 2,4-D and its mixtures with several analogues. This new strategy lays the foundation for efficiently developing diverse complex biological sample-compatible ratiometric fluorescent MIPs highly useful for real-world bioanalyses and diagnostics.

Exploring Nucleobase Modifications in Oligonucleotide Analogues for Use as Environmentally Responsive Fluorophores and Beyond.

Over the past two decades, it has become abundantly clear that nucleic acid biochemistry, especially with respect to RNA, is more convoluted and complex than previously appreciated. Indeed, the application and exploitation of nucleic acids beyond their predestined role as the medium for storage and transmission of genetic information to the treatment and study of diseases has been achieved. In other areas of endeavor, utilization of nucleic acids as a probe molecule requires that they possess a reporter group. The reporter group of choice is often a luminophore because fluorescence spectroscopy has emerged as an indispensable tool to probe the structural and functional properties of modified nucleic acids. The scope of this review spans research done in the Hudson lab at The University of Western Ontario and is focused on modified pyrimidine nucleobases and their applications as environmentally sensitive fluorophores, base discriminating fluorophores, and in service of antisense applications as well as tantalizing new results as G-quadruplex destabilizing agents. While this review is a focused personal account, particularly influential work of colleagues in the chemistry community will be highlighted. The intention is not to make a comprehensive review, citations to the existing excellent reviews are given, any omission of the wonderful and impactful work being done by others globally is not intentional. Thus, this review will briefly introduce the context of our work, summarize what has been accomplished and finish with the prospects of future developments.

Brain-targeted Near-Infrared Nanobeacon for In Situ Monitoring H2S Fluctuation during Epileptic Seizures.

Epilepsy is a neurological brain disease, and its recurrent seizures are related to the reductive substance-powered antioxidant defense system (ADS). However, until now, there has been no report on the study of in situ antioxidant fluctuation during epilepsy of varying severity. In this work, hydrogen sulfide (H2S) was selected as the model target, a H2S-responsive near-infrared fluorophore was designed and synthesized, and an amphiphilic molecule was synthesized and modified with angiopep-2 peptide at its hydrophilic terminus. A nanobeacon termed as BFPP was prepared by the formation of micelles with the package of the fluorophore. The nanobeacon was sensitive to H2S, with a low detection limit of 17 nM. The H2S fluctuation in cells can be monitored by fluorescence imaging. In addition, angiopep-2 peptide at the surface of BFPP helps it cross the blood-brain barrier, and near-infrared fluorescence improves in vivo imaging. BFPP revealed that H2S was at a moderate level in the normal brain, but its level was obviously elevated during mild epilepsy because of the activation of the ADS while significantly suppressed during severe epilepsy due to neuronal damage. This approach is generally accessible for other targets by altering the responsive fluorophore, with significance for in situ analysis of brain pathology.

Modified norcyanines enable ratiometric pH imaging beyond 1000 nm

Activatable fluorophores with emission beyond 1000 nm have the potential to enable high contrast imaging in complex in vivo settings. However, there are few scaffolds that can be applied to this challenge. Here we detail the synthesis and evaluation of benzo[c,d]indole-substituted norcyanines that enable pH responsive fluorescence imaging in the long wavelength (>1150 nm) range. A key component of our molecular design is the installation of a hydrophilic substituted quaternary amine in the central dihydropyridine ring system. A compound with a C4′-phenyl substituent, but not the C4′-protio homologue, exhibits absorbance maxima of 740 nm and 1130 nm in basic and acidic media, respectively, with evidence of J-aggregate-like properties. These two distinct absorbances enabled ratiometric imaging of probe internalization in a tumor model. Overall, these studies provide a new class of activatable long-wavelength responsive fluorophores with promising photophysical properties.

Ratiometrically pH-Insensitive Upconversion Nanoprobe: Toward Simultaneously Quantifying Organellar Calcium and Chloride and Understanding the Interaction of the Two Ions in Lysosome Function.

Calcium and chloride levels are closely related to lysosome dysfunction. However, the simultaneous measurement of calcium (Ca2+) and chloride (Cl-) in acidic subcellular organelles, which is conducive to a deep understanding of lysosome-related biological events, remains a challenge. In this study, we developed a pH-insensitive, ratiometric NIR nanoprobe for the simultaneous detection of Ca2+ and Cl- in acidic lysosomes and determined the roles of the two ions in lysosome function. The upconversion nanoprobe with blue, green, and red emissions was modified with a Ca2+-sensitive dye (Rhod-5N) and Cl--responsive fluorophore (10,10'-bis[3-carboxypropyl]-9,9'-biacridinium dinitrate, BAC). As a result of a dual-luminescence resonance energy transfer between upconversion nanoparticles (UCNPs) and Rhod-5N/BAC, the blue and green upconversion luminescence (UCL) of UCNPs were quenched and the red UCL was used as the reference signal. The ratiometric upconversion nanoprobe possesses a specific ability for the concurrent recognition of Ca2+ and Cl- ions independent of the influence of the environmental pH. To locate the probe in the lysosome, dextran was further modified with upconversion nanoparticles. Then, the nanoprobe with a high spatial resolution was constructed for the simultaneous monitoring of Ca2+ and Cl- in acidic lysosomes. Moreover, it was found that the reduction of lysosomal Cl- affects the release of lysosomal Ca2+, which further blocks the activities of specific lysosomal enzymes. The ratiometric NIR nanoprobe has great potential for decoding and evaluating lysosomal diseases.

Azetidines-Containing Fluorescent Purine Analogs: Synthesis and Photophysical Properties.

Analogues of N,N-dimethyladenine exploiting both thieno-and isothiazolo-pyrimidine cores were modified with 3-subsituted azetidines to yield visibly emissive and responsive fluorophores. The emission quantum yields, among the highest seen for purine analogues (0.64 and 0.77 in water and dioxane respectively), correlated with the Hammett inductive constants of the substituents on the azetidine ring. Ribosylation of the difluoroazetidino-modified nucleobase yielded an emissive nucleoside that displayed a substantially lower emission quantum yield in water, compared to the precursor nucleobase. Importantly, high emission quantum yield was restored in deuterium oxide, which highlights the potential impact of the sugar moiety on the photophysical features of fluorescent nucleosides, a functionality usually considered non-chromophoric and photophysically benign.

Hydroquinone-functionalized cyanine dye as reduction-sensitive probe for imaging of biological reducing species

The redox chemistry and status of different cell types and tissues has still not been well understood and thus represents a major focus for the development of novel responsive fluorophores. In this context, there is an ongoing search for reduction-sensitive probes that can globally or specifically image reducing environments or species in biological settings. Here, the synthesis and characterization of responsive cyanine dyes operating in the near-infrared (NIR) is reported based on the use of the hydroquinone/quinone and catechol/quinone couple. The introduction of a hydroquinone group into the meso-position of an indodicarbocyanine dye via a Suzuki cross-coupling reaction created a water-soluble fluorescent “on-off-on” probe whose fluorescence can be modulated through oxidation and reduction. By adding biologically relevant reducing species, such as glutathione, cysteine or ascorbate, the “off”-probe could be rapidly turned on around 660 nm within 30 s. Reversible switching between the “on” and “off” form was demonstrated. Furthermore, the sensor was applied in confocal microscopy studies as a reduction-sensitive probe for bioimaging in living cells.

Visualization of mitophagy using LysoKK, a 7-nitro-2,1,3-benzoxadiazole-(arylpropyl)benzylamine derivative

7-Nitro-2,1,3-benzoxadiazole (NBD) is an environmentally responsive fluorophore. We have reported that GIF2114 and GIF2115, anti-ferroptotic N,N-dimethylaniline-compounds, localize to lysosome when they are visualized by NBD. Here we show that the NBD fluorescence of GIF2259, a hybrid derivative of GIF2114 and GIF2115, was quenched in aqueous buffer. However, the fluorescence was recovered when GIF2259 was localized on lysosomes. Although the dimethylamine group of GIF2259 is not essential for the lysosome localization, it contributes to a high specific/nonspecific ratio of fluorescence. Under a normal condition, the lysosomal signal visualized by GIF2259 did not overlap with mitochondria, while, under starved or depolarization conditions, it overlapped with mitochondria, suggesting that GIF2259 could be used as a simple tool for monitoring lysosomal metabolism and mitochondrial turnover, that is mitophagy.

Cover Feature: Responsive Fluorophore Aggregation Provides Spectral Contrast for Fluorescence Lifetime Imaging (ChemBioChem 15/2020)

Cover Feature: Responsive Fluorophore Aggregation Provides Spectral Contrast for Fluorescence Lifetime Imaging (ChemBioChem 15/2020)

Aptamer-based ratiometric fluorescent nanoprobe for specific and visual detection of zearalenone

We firstly proposed a ratiometric fluorescent nanoprobe with aptamer-labeled CdTe quantum dots (QDs) for the determination of zearalenone (ZEN). The nanoprobe was designed with dual-color emission fluorescence by single-wavelength excitation. Red-emitting silica-coated QDs (r-QDs@SiO2) with the maximum excitation/emission at 400/608 nm were used as a reference. Green-emitting QDs linked with aptamer and covalently bonded to r-QDs@SiO2 with the maximum excitation/emission at 400/518 nm were used as the responsive fluorophore for specific recognition of ZEN. The green fluorescence was quenched in the presence of ZEN. The ratio of fluorescence at 518 nm/608 nm decreased linearly against the increase of ZEN concentrations in the range of 31.4-628 nmol/L. The color of the solution changed from green to red as the concentration of ZEN increased. This method offered a ratiometric, specific and visual determination of ZEN. The limit of detection was 7.5 nM. The aptamer-labeled ratiometric strategy showed acceptable stability and selectivity. Therefore, the approach was successfully used to measure ZEN in food and can provide guidance for the design of point-of-care, multiplexed biosensors.

Responsive Fluorophore Aggregation Provides Spectral Contrast for Fluorescence Lifetime Imaging.

Fluorophores experience altered emission lifetimes when incorporated into and liberated from macromolecules or molecular aggregates; this trend suggests the potential for a fluorescent, responsive probe capable of undergoing self-assembly and aggregation and consequently altering the lifetime of its fluorescent moiety to provide contrast between the active and inactive probes. We developed a cyanobenzothioazole-fluorescein conjugate (1), and spectroscopically examined the lifetime changes caused by its reduction-induced aggregation in vitro. A decrease in lifetime was observed for compound 1 in a buffered system activated by the biological reducing agent glutathione, thus suggesting a possible approach for designing responsive self-aggregating lifetime imaging probes.

Sequential determination of cerium (IV) ion and ascorbic acid via a novel organic framework: A subtle interplay between intramolecular charge transfer (ICT) and aggregated-induced-emission (AIE)

Abstract Construction of systems with variable electron distribution is a relatively new method in design of responsive fluorophores. Herein, 4,4′,4″,4‴-(ethene-1,1,2,2-trayltetrakis (benzene-4,1-diyl))tetrakis(1-carboxymethyl-pyridin-1-ium)bromide (LG556) is developed and its specific spectral behavior has been verified based on perturbation involving intramolecular charge transfer (ICT) via the connected electron donor and acceptor. In the presence of Ce4+ ions, the fluorescence intensity of LG556 can be efficiently quenched due to the disassembly of LG556 nanoaggregates and inner filter effect (IFE). The sensitivity is dependent on the concentration of Ce4+ with an excellent linear range 1–150 μM and a low detection limit of 0.62 μM. At this stage, the working principle behind the aggregated-induced-emission (AIE) has been employed and the difficulty lying in aggregate formation is overcome. The incorporated ascorbic acid causes the reduction of Ce4+ to Ce3+ and the re-assembly of LG556 has been realized. The detection limit has been evaluated to be 39.2 nM, which is lower than most of the reported results. Therefore, the “on-off-on” signal conversion leads to a reversible IMPLICATION logic gate and the molecular probe has been applied for the analysis of Ce4+ and ascorbic acid in pure aqueous solution with satisfactory results.

A Reduction-Sensitive Fluorous Fluorogenic Coumarin.

Fluorophores that are sensitive to their environment are useful tools for sensing chemical changes and probing biological systems. Here, we extend responsive fluorophores to the fluorous phase with the synthesis of a reduction-sensitive fluorous-soluble fluorogenic coumarin. We demonstrate that this fluorophore responds to various reducing agents, most notably glutathione, a key biological reductant. The fluorous solubility of this probe allows for its encapsulation into two different fluorous nanomaterials: perfluorocarbon nanoemulsions and fluorous core-shell micelles. The fluorogenic coumarin allows us to study how efficiently these vehicles protect the contents of their interior from the external environment. In the presence of glutathione, we observe different degrees of release for micelles and emulsions. This understanding will help guide future applications of fluorous nanomaterials as drug delivery vehicles.

Tuning the p Ka of a pH Responsive Fluorophore and the Consequences for Calibration of Optical Sensors Based on a Single Fluorophore but Multiple Receptors.

Since Sørensen and Bjerrum defined the pH scale, we have relied on two methods for determining pH, the colorimetric or the electrochemical. For pH electrodes, calibration is easy as a linear response is observed in the interesting pH range from 1 to ∼12. For colorimetric sensors, the response follows the sigmoidal Bjerrum diagram of an acid-base equilibrium. Thus, calibration of colorimetric sensors is more complex. Here, seven pH responsive fluorescent dyes based on the same diazaoxatriangulenium (DAOTA) fluorophore linked to varying receptor groups were prepared. Photoinduced electron transfer (PeT) quenching from appended aniline or phenol receptors generated the pH response of the DAOTA dyes, and the position of the p Ka value of the dye was tuned using the Hammett relationship as a guideline. The fluorescence intensity of the dyes in a sol-gel matrix environment was measured as a function of pH in universal buffer, and it was found that the dyes behave as perfect pH responsive probes under these conditions. The response of optical pH sensors is nonlinear and was found to be limited to 2-3 pH units for a precision of 0.01 pH unit. As sensors with a broader sensitivity range can be achieved by mixing multiple dyes with different p Ka values, mixtures of dyes in solution were investigated, and a broad range pH sensor with a precision of 0.006 pH units over a range of 3.6 pH units was demonstrated. Further, approximating the sensor response as linear was considered, and a limiting precision for this approach was determined. As the responses of the pH responsive DAOTA dyes were found to be ideally sigmoidal and as the six dyes were shown to have p Ka values scattered over a range from ∼2 to ∼9, this allows for design of a broad range optical pH sensor in the pH range from 1 to 10. This hypothesis was tested using quaternary mixtures of the different DAOTA dyes, and these were found to behave as a direct sum of the individual components. Thus, while linear calibration is limited to a precision of 0.02 in a range of 2-3 pH units, calibration using ideal sigmoidal functions is possible in the range of 1-10 with a precision better than 0.01, and as good as 0.002 pH units.

A split aptamer-labeled ratiometric fluorescent biosensor for specific detection of adenosine in human urine.

A dual-emission ratiometric fluorometric aptasensor is presented for highly specific detection of adenosine. An adenosine binding aptamer (ABA) was split into two halves (termed as ABA1 and ABA2). ABA1 was covalently bound to blue-emitting carbon dots (with excitation/emission maxima at 365/440nm) as responsive fluorophore (referred to as ABA1-CDs). ABA2 was linked to red-emitting silica-coated CdTe quantum dots (with excitation/emission maxima at 365/613nm) acting as internal reference and referred to as ABA2-QDs@SiO2. Upon addition of graphene oxide, the fluorescence of ABA1-CDs is quenched. After subsequent addition of ABA2-QDs@SiO2 and different amounts of adenosine, the blue fluorescence is recovered and causes a color change from red to royalblue. The method represents a ratiometric turn-on assay for visual, colorimetric and fluorometric determination of adenosine. The limit of detection is as low as 2.4nM in case of ratiometric fluorometry. The method was successfully applied to the determination of adenosine in (spiked) human urine. Recoveries range from 98.8% to 102%. Graphical abstract Adenosine binding aptamer1-carbon dots (ABA1-CDs) can absorb on graphene oxide (GO) via π stacking. This causes fluorescence to be quenched by fluorescence resonance energy transfer (FRET). After addition of ABA2-silica-coated quantum dots (ABA2-QDs@SiO2) and adenosine, binding of adenosine to two pieces of aptamers forms acomplex (ABA1-CD/adenosine/ABA2-QD@SiO2)which dissociates from GO. As a result, fluorescence is recovered.

Self-Assembled Micellar Nanosensor toward pH with high photo-stability and its application in living cells

Based on photo-induced electron transfer, 1,8-naphthalic anhydride-based organic molecular fluorescent pH-sensor (1) was designed and synthesized. Hydrophobic, fluorescent hybrid nanosensor (1-PS35-b-PAA30) encapsulated with the hydrophobic pH responsive fluorophore for sensing intracellular pH has been fabricated based on the self-assembly of amphiphilic diblock copolymer PS35-b-PAA30 and 1. The as-synthesized 1-PS35-b-PAA30 sensor exhibits excellent photo-stability, good anti-disturbance ability, and enhanced fluorescence intensity under acidic environment with respect to the corresponding free dye in highly polar aqueous system because of the encapsulation of 1 inside nanoparticle cores with weak polarity environment. The fluorescence intensity of 1-PS35-b-PAA30 is enhanced by 7.3-fold upon changing from base (pH = 9.0) to acid (pH = 4) in aqueous system, which can exactly meet the physiological pH range in cells. Moreover, its linear fluorescent response from pH 5.2 to 7.4 makes this sensor suitable for the practical tracking of pH fluctuation in live cells. The fluorescence imaging and TEM experiments indicated that the sensor permeated into cells and could not be observed because of aggregation in acidic condition.

Arresting "Loose Bolt" Internal Conversion from -B(OH)2 Groups is the Mechanism for Emission Turn-On in ortho-Aminomethylphenylboronic Acid-Based Saccharide Sensors.

Different mechanisms for the emission turn-on of ortho-aminomethylphenylboronic acids with appended fluorophores in response to saccharide binding in aqueous media have been postulated, such as photoinduced electron transfer (PET), "pKa switch", and disaggregation. However, none of the hypotheses is consistent with all the data for boronic acid-based sensors. To create a unifying theory that can explain the data, we performed a series of experiments to explore the origin of the emission turn-on with several boronic-acid based sensors upon binding fructose. First, we showed that the receptors and their complexes with fructose are solvent-inserted, with no B-N interactions. Second, we verified that the sensors are not aggregated. Third, in pure methanol, that exchanges -B(OH)2 to -B(OMe)2 groups, we found no fluorescence response upon binding fructose. We propose this occurs via lessening of internal conversion mechanisms. To investigate this proposal further, we performed a solvent isotope effect study. The fluorescence of the probes in D2O (-B(OH)2 → -B(OD)2) does not change upon fructose binding. It is well accepted that -OD oscillators are less efficient energy acceptors due to their lower frequency vibrational modes. Thus, our studies reveal that modulating the -B(OH)2-induced internal conversion (an example of a "loose bolt effect") explains how potentially all ortho-aminomethylphenylboronic acid-based fluorescence sensors signal the presence of sugars.