Fluorochrome Incorporation Research Articles

Polychrome labeling reveals skeletal triradiate and elongation dynamics and abnormalities in patterning cue-perturbed embryos

The larval skeleton of the sea urchin Lytechinus variegatus is an ideal model system for studying skeletal patterning; however, our understanding of the etiology of skeletal patterning in sea urchin larvae is limited due to the lack of approaches to live-image skeleton formation. Calcium-binding fluorochromes have been used to study the temporal dynamics of bone growth and healing. To date, only calcein green has been used in sea urchin larvae to fluorescently label the larval skeleton. Here, we optimize labeling protocols for two additional calcium-binding fluorochromes: xylenol orange and calcein blue- and demonstrate that these fluorochromes can be used individually or in nested pulse-chase experiments to understand the temporal dynamics of skeletogenesis and patterning. Using a pulse-chase approach, we show that the initiation of skeletogenesis begins around 15 ​h post fertilization. We also assess the timing of triradiate formation in embryos treated with a range of patterning perturbagens and demonstrate that triradiate formation is delayed and asynchronous in embryos ventralized via treatment with either nickel or chlorate. Finally, we measure the extent of fluorochrome incorporation in triple-labeled embryos to determine the elongation rate of numerous skeletal elements throughout early skeletal patterning and compare this to the rate of skeletal growth in embryos treated with axitinib to inhibit VEGFR. We find that skeletal elements elongate much more slowly in axitinib-treated embryos, and that axitinib treatment is sufficient to induce abnormal orientation of the triradiates.

970 nm low-level laser affects bone metabolism in orthodontic tooth movement

ObjectiveDuring orthodontic tooth movement (OTM), the speed of movement depends on the rate of bone turnover. In this study, we used a rat model to investigate the effect of 970 nm low-level laser therapy (LLLT) on OTM under different dose and frequency protocols. MethodsWe first compared the OTM rates between the OTM only control and the OTM + LLLT group (1250 J/cm2) in Experiment 1 and showed that LLLT significantly increased OTM. In Experiment 2, we employed 3 different LLLT protocols: the low-dose group and the high-dose group receiving 5 doses of 750 J/cm2 and 15,000 J/cm2 of LLLT every 3 days, respectively, and the early high-dose group which received 5 daily doses at 15,000 J/cm2 at the beginning of the experiments. The OTM-only control group received no LLLT. Tooth movement rate was measured through sequential silicone impressions. MicroCT was also performed to evaluate bone de-mineralization rate. Bone histmorphometry was used to compare the bone turnover rate between LLLT group and control group. Finally, TRAP, Osteocalcin, and VEGF expression is evaluated by immunohistochemistry (IHC) in tissue sections. ResultsWhen LLLT treatment was given every three days, both the 1250 J/cm2 and 15,000 J/cm2 groups showed significantly increased OTM compared to the control group. No significant difference was observed in the 750 J/cm2 group, or in the early irradiation group, when compared with controls, although 750 J/cm2 showed the same trend of accelerating OTM. The MicroCT result of rat maxilla demonstrated that LLLT increased bone remodeling and showed decreased bone mineral density and bone volume/total volume in the furcation areas of the maxillary first molars at the end of experiment. LLLT without OTM increased bone turnover as evidenced by fluorochrome incorporation. Immunohistochemistry analyses revealed high osteocalcin expression at later stages of OTM in the LLLT group, while VEGF expression was highly induced in the LLLT + OTM group at an early stage. ConclusionOur results suggest that the 970 nm LLLT increases the rate of OTM in a dose-sensitive and frequency-dependent manner. Further animal and human studies are needed to determine the optimal timing and dosage of LLLT for OTM acceleration.

Raloxifene but not alendronate can compensate the impaired osseointegration in osteoporotic rats.

Alendronate and raloxifene, a bisphosphonate and a selective estrogen modulator, respectively, are established osteoporosis therapies. Current evidence suggests that simultaneous application of osteoporosis therapies modulates osseointegration. However, alendronate shows inconsistent findings and raloxifene has not been studied comprehensively. This study aimed to evaluate the bone dynamics and molecular and microstructural features at the peri-implant bone interface in osteoporotic rats. Thirty female rats underwent ovariectomy and were fed a diet low in calcium and phosphate and treated with alendronate or raloxifene for 30days or underwent fictional ovariectomy surgery (SHAM) prior to implant insertion in the tibia; osteoporosis therapies continued thereafter. After 42days, peri-implant bone was evaluated by histometric and micro-CT analysis. Fluorochrome incorporation and gene expression was determined to evaluate bone turnover. We report here that alendronate had no impact on bone-to-implant contacts and the mineral apposition rate. The RANKL/OPG ratio and local bone volume, however, were increased compared to the untreated osteoporotic rats. Even though signaling to bone resorption activity through RANKL production was observed in the alendronate group, the blockade of bone resorption activity that occurs in decorrence to alendronate activity took place and resulted in an increase in bone volume. Raloxifene significantly increased osseointegration in osteoporotic rats, as indicated by bone-to-implant contacts, mineral apposition, and local bone volume. Raloxifene, however, had no considerable impact on the RANKL/OPG ratio compared to untreated osteoporotic rats. As expected, the SH group showed higher bone-to-implant contacts and mineral apposition rates than the untreated osteoporotic rats. These findings suggest that raloxifene but not alendronate can compensate for the impaired osseointegration in osteoporotic rats. Regarding the superiority of raloxifene observed in the improvement of bone dynamics response, this statement suggests that raloxifene could be a good option for osteoporosis patients in oral rehabilitation procedures.

Hyaluronic Acid-Based Hydrogel Coating Does Not Affect Bone Apposition at the Implant Surface in a Rabbit Model

BackgroundUncemented orthopaedic implants rely on the bone-implant interface to provide stability, therefore it is essential that a coating does not interfere with the bone-forming processes occurring at the implant interface. In addition, local application of high concentrations of antibiotics for prophylaxis or treatment of infection may be toxic for osteoblasts and could impair bone growth.Questions/Purposes In this animal study, we investigated the effect of a commercially available hydrogel, either unloaded or loaded with 2% vancomycin. We asked, does unloaded hydrogel or hydrogel with vancomycin (1) interfere with bone apposition and timing of bone deposition near the implant surface; and (2) induce a local or systemic inflammatory reaction as determined by inflammation around the implant and hematologic parameters.MethodsIn 18 New Zealand White rabbits, an uncoated titanium rod (n = 6), a rod coated with unloaded hydrogel (n = 6), or a rod coated with 2% vancomycin-loaded hydrogel (n = 6) was implanted in the intramedullary canal of the left tibia. After 28 days, the bone volume fraction near the implant was measured with microCT analysis, inflammation was semiquantitatively scored on histologic sections, and timing of bone apposition was followed by semiquantitative scoring of fluorochrome incorporation on histologic sections. Two observers, blinded to the treatment, scored the sections and reconciled their scores if there was a disagreement. The hematologic inflammatory reaction was analyzed by measuring total and differential leukocyte counts and erythrocyte sedimentation rates in blood. With group sizes of six animals per group, we had 79% power to detect a difference of 25% in histologic scoring for infection and inflammation.ResultsNo differences were found in the amount of bone apposition near the implant in the No Gel group (48.65% ± 14.95%) compared with the Gel group (59.97% ± 5.02%; mean difference [MD], 11.32%; 95% CI, −3.89% to 26.53%; p = 0.16) or for the Van2 group (56.12% ± 10.06%; MD, 7.46; 95% CI, −7.75 to 22.67; p = 0.40), with the numbers available. In addition, the scores for timing of bone apposition did not differ between the No Gel group (0.50 ± 0.55) compared with the Gel group (0.33 ± 0.52; MD, −0.17; 95% CI, −0.86 to 0.53; p = 0.78) or the Van2 group (0.83 ± 0.41; MD, 0.33; 95% CI, −0.36 to 1.03; p = 0.42). Furthermore, we detected no differences in the histopathology scores for inflammation in the No Gel group (2.33 ± 1.67) compared with the Gel group (3.17 ± 1.59; MD, 0.83; 95% CI, −0.59 to 2.26; p = 0.31) or to the Van2 group (2.5 ± 1.24; MD, 0.17; 95% CI, −1.26 to 1.59; p = 0.95). Moreover, no differences in total leukocyte count, erythrocyte sedimentation rate, and neutrophil, monocyte, eosinophil, basophil, and lymphocyte counts were present between the No Gel or Van2 groups compared with the Gel control group, with the numbers available.ConclusionThe hydrogel coated on titanium implants, unloaded or loaded with 2% vancomycin, had no effect on the volume or timing of bone apposition near the implant, and did not induce an inflammatory reaction in vivo, with the numbers available.Clinical relevanceAntibiotic-loaded hydrogel may prove to be a valuable option to protect orthopaedic implants from bacterial colonization. Future clinical safety studies will need to provide more evidence that this product does not impair bone formation near the implant and prove the safety of this product.

Bone morphogenetic protein-2 nonviral gene therapy in a goat iliac crest model for bone formation.

Treatment and reconstruction of large bone defects, delayed unions, and nonunions is challenging and has resulted in an ongoing search for novel tissue-engineered therapies. Bone morphogenetic protein-2 (BMP-2) gene therapy is a promising strategy to provide sustained production of BMP-2 locally. Alginate polymer-based nonviral gene therapy with BMP-2 plasmid DNA (pBMP-2) in constructs with multipotent mesenchymal stromal cells (MSCs) has resulted in prolonged gene expression and bone formation in vivo. To further translate this technology toward larger animal models, important issues remain to be investigated, such as the necessity of seeded cells as a target for gene therapy. For that purpose, a large animal-screening model in an orthotopic location, with fully separated chambers, was investigated. Four cylinder-shaped implants were placed in the iliac crests of ten goats. Polycaprolactone tubes around each implant allowed bone ingrowth from the underlying bone and bone marrow and ensured separation of the experimental conditions. An empty tube showed low levels of spontaneous bone ingrowth, and implantation of autologous bone indicated proper bone function with respect to remodeling and resorption. Control ceramic scaffolds were compared to scaffolds containing pBMP-2 either or not combined with seeded MSCs. Fluorochrome incorporation evaluated at 3, 6, and 9 weeks and histomorphometry at 12 weeks after implantation revealed clear differences between the groups, with pBMP-2 combined with MSCs being the most effective. The BMP-2 was demonstrated in a variety of bone-residing cells through immunohistochemistry. Further analysis indicated that multinucleated giant cells might have an important role in transgene expression. Taken together, this work introduces a large animal model for studying bone formation at multiple sites simultaneously in an orthotopic location. The model appeared robust, showed no neighboring effects, and demonstrated effectivity of combined cell and gene therapy.

Decellularized Cartilage-Derived Matrix as Substrate for Endochondral Bone Regeneration

Following an endochondral approach to bone regeneration, multipotent stromal cells (MSCs) can be cultured on a scaffold to create a cartilaginous callus that is subsequently remodeled into bone. An attractive scaffold material for cartilage regeneration that has recently regained attention is decellularized cartilage-derived matrix (CDM). Since this material has shown potential for cartilage regeneration, we hypothesized that CDM could be a potent material for endochondral bone regeneration. In addition, since decellularized matrices are known to harbor bioactive cues for tissue formation, we evaluated the need for seeded MSCs in CDM scaffolds. In this study, ectopic bone formation in rats was evaluated for CDM scaffolds seeded with human MSCs and compared with unseeded controls. The MSC-seeded samples were preconditioned in chondrogenic medium for 37 days. After 8 weeks of subcutaneous implantation, the extent of mineralization was significantly higher in the MSC-seeded constructs versus unseeded controls. The mineralized areas corresponded to bone formation with bone marrow cavities. In addition, rat-specific bone formation was confirmed by collagen type I immunohistochemistry. Finally, fluorochrome incorporation at 3 and 6 weeks revealed that the bone formation had an inwardly directed progression. Taken together, our results show that decellularized CDM is a promising biomaterial for endochondral bone regeneration when combined with MSCs at ectopic locations. Modification of current decellularization protocols may lead to enhanced functionality of CDM scaffolds, potentially offering the prospect of generation of cell-free off-the-shelf bone regenerative substitutes.

The dynamics of bone remodeling around biofunctionalized implant surfaces. A fluorescence analysis in a dog model

Background The aim of this study was to evaluate the bone remodeling around different implant surfaces by a fluorescence analysis. Materials and Methods The mandibular bilateral premolars of 8 dogs were extracted and after 12 weeks each dog received 6 implants. The 4 experimental groups were constituted of implants with the same microstructured topography with or without some concentration of a bioactive peptide. During the healing period of 2 months, polychromatic fluorescence labeling was performed to investigate the dynamics of bone remodeling around the different implant surfaces. The bone markers were administered on the third day after implant placement and then after 1, 2, 4 and 6 weeks. Results New bone formation was determined histomorphometrically by bone markers quantifications adjacent and distant to the implants surfaces. In general, the intra-group analysis showed a pattern of fluorochrome incorporation among the different groups. However, the comparison between the groups revealed a statistically significant difference in favor of the microstructured surface modified with a “low concentration of a bioactive peptide” at the adjacent area in the 4-week period only (p<0.001). Additionally at 3-day and at 6-week periods this group also achieved numerically superior values of fluorochrome incorporation. Conclusion Bone remodeling is an active process resulting from the alternation of resorptive and formative activities. There is a similar pattern of bone remodeling among the microstructured surfaces, biofunctionalized or not; however the addition of an adhesive peptide in “low concentration”favored the bone formation adjacent to the implants when compared to the other surfaces during the period evaluated.

Influence of Endothelial Progenitor Cells and Platelet Gel on Tissue-Engineered Bone Ectopically in Goats

For the development of functional large bone tissue constructs, optimal oxygen and nutrients supply of seeded multipotent stromal cells (MSCs) is likely dependent on vascularization. The introduction of endothelial progenitor cells (EPCs) to MSC cultures might enhance vascularization and therefore increase bone formation. In this study we cocultured MSCs and EPCs and investigated performance and bone formation both in vitro and in vivo. The EPCs used were characterized by uptake of acetylated low-density lipoproteins, binding of isolectin B4 and expression of platelet endothelial cell adhesion molecule. EPC/MSC in vitro coculture showed that both cell types exerted a positive effect on proliferation of the other. For the in vivo studies, we applied platelet-leukocyte gel (PLG), containing several growth factors, as a means to further induce vascularization and thereby enhance bone formation. Cocultures and monocultures were combined with either PLG or plasma, seeded on ceramic scaffolds, and implanted intramuscularly in nine goats. After 16 weeks of implantation, it turned out that seeding MSCs and EPCs both resulted in significant more bone lining the scaffold than the unseeded controls, and MSCs and cocultures with highest MSC/EPC ratio were most competent. Cocultures did not show a higher bone content than the monoculture of MSCs. Fluorochrome incorporation results showed that the presence of seeded cells, either MSCs or EPCs, in the constructs accelerated bone formation. Finally, the addition of PLG instead of plasma did have a positive influence on the quantity of incorporated bone.

Comparing Various Off-the-Shelf Methods for Bone Tissue Engineering in a Large-Animal Ectopic Implantation Model: Bone Marrow, Allogeneic Bone Marrow Stromal Cells, and Platelet Gel

Construction of bone grafts for regenerative medicine would highly benefit from off-the-shelf components, such as allogeneic bone marrow stromal cells (BMSCs) and blood-derived growth factors from platelet concentrate. Although allogeneic BMSCs are considered immunosuppressive, their use in transplantation studies is still cautioned. In this study, we used off-the-shelf goat allogeneic BMSCs, per-operatively aspirated bone marrow (BM) and platelet gel (PLG). Ten goats received six different hybrid constructs consisting of biphasic calcium phosphate scaffolds seeded with PLG or plasma that were mixed with BM, allogeneic BMSCs or left without cells. All constructs were implanted in the paraspinal muscles for 9 weeks. Fluorochromes were administered at 2, 3, and 5 weeks to assess onset of bone formation. Analysis revealed that the scaffolds without cells yielded small amounts of bone. Allogeneic BMSCs had a positive effect on the amount and early onset of bone formation. Fresh BM did not enhance ectopic bone formation. The PLG, which contained higher levels of transforming growth factor beta than plasma, did not result in more bone either. Fluorochrome incorporation results indicate that the presence of seeded cells in the constructs accelerates bone formation. This study shows a potential role of allogeneic BMSCs in bone tissue-engineering research.

Prevascularized bone graft cultured in sintered porous β-Ca 2P 2O 7 with 5 wt% Na 4P 2O 7·10H 2O addition ceramic chamber

Autogenous bone transfer is an important part of reconstructive plastic surgery. Presently available techniques have the disadvantages of limitation of available donor site, loss of donor tissue and the possibility of donor defect or deformity. In the present study, a vascularized bone graft was created and cultured in the groin area of the New Zealand rabbit. The cylindrical ceramic chambers, 15mm in length, 6mm in outer diameter and 3mm in inner diameter, were prepared by the addition of sintered porous β-Ca 2P 2O 7 with 5 wt% Na 4P 2O 7-10H 2O. In the first group, the chambers impregnated with autogenous bone fragments and allogenous demineralized bone matrix with volume ratio 1:1 were cultured in the rabbit's groin area with saphenous vessels passing through. In the second group, the chambers were treated by the same procedures as the first group but without saphenous vessels passing through. In the third group, the chambers were not impregnated, and were cultured in the groin area with saphenous vessels. After 2, 4, 6, 8 and 12 wk of operation, the animals were killed with an overdose of intravenous pentobarbital. The viability of the osseous tissue in the chamber was evaluated by histological examination, microangiograms and fluorochrome incorporation for the three groups. The autogenous bone chips could survive and retain their osteogenic properties while packed into the sintered porous β-Ca 2P 2O 7 (with 5 wt% Na 4P 2O 7 · 10H 2O addition) ceramic chamber and implanted in the rabbit groin area up to 12 wk. However, even at the longest time periods, considerable amounts of dead bone were present in the chambers. In addition, we observed bone resorption in the three groups up to 12 wk, which might be attributed to lack of physiological stress. There were significant differences in new bone formation and osseous cell viability among the three groups. The prevascularized vessels and autogenous bone chips were both necessary for the formation of new bone and osteogenic property in the chamber under these heterotopic circumstances. The biodegradable ceramic used in this study was gradually absorbed and dissolved in the physiological environment. However, the degradation debris of the ceramic caused no injury to the new bone formation. These findings support the concept of creating a preformed vascularized bone graft to reconstruct segmental bone defects.

Measurement of intracellular pH in cultured cells by flow cytometry with BCECF-AM

This study evaluates the suitability of flow cytometry with the fluorochrome BCECF for measuring the intracellular pH (pH i) of cultured cells, and monitors the changes in pH i in murine hybridoma in batch culture and chick embryo fibroblast in monolayer culture (5th passage). The technique produced highly reproducible, repeatable results. The theoretical sensitivity from the calibration curve was 0.0004 pH units. But analysis of the standard deviation of the histogram of the green/red fluorescence ratios indicated a mean sensitivity of 0.08 (0.07–0.09) pH units. Interference due to cell size, fluorochrome incorporation and esterases were minimized by establishing a calibration curve with the cells whose pH i was to be measured using the 525 610 nm fluorescence ratio after excitation at 488 nm. The pH i of exponentially growing, batch cultured hybridomas was 7.50 at the start of culture. pH i increased during the exponential growth phase and dropped towards cell death. The pH i of the chick fibroblasts in monolayer culture was 7.30.

PTH/PTHrP receptor expression on osteoblasts and osteocytes but not resorbing bone surfaces in growing rats.

Using in situ hybridization, we correlated the expression of mRNA for the parathyroid hormone/parathyroid hormone related peptide (PTH/PTHrP) receptor with bone formation and resorption in undecalcified serial sections of bones from growing rats. In addition we investigated the presence of biologically active receptors in the same locations using an in vivo autoradiographic technique. In the ulnae of growing rats, there are well defined zones of cortical bone formation and resorption. These contribute to the modeling drifts by which the bone achieves its adult shape. Forming surfaces incorporate fluorochrome labels, are lined with osteoid, and have a layer of cuboidal osteoblasts that have a high alkaline phosphatase activity. Resorbing surfaces have no fluorochrome incorporation, no osteoid, and are lined with resorbing cells with high tartrate-resistant acid phosphatase (TRAP) activity. PTH/PTHrP receptor mRNA was expressed predominantly on forming but not on resorbing bone surfaces and colocalized with sites of binding of radiolabeled PTH after intravenous injection. PTH/PTHrP mRNA expression on osteocytes was inconclusive but radiolabeled PTH bound to a proportion of osteocytes in all regions of the cortex although binding was not specifically related to areas of bone formation or resorption. These results suggest that in growing animals the actions of PTH or PTHrP are connected more with bone formation than resorption. Such a role may be linked to the ability of PTH to induce bone formation in adults but does not explain the actions of the hormone in regulating resorption. Binding of PTH to osteocytes increases the evidence for a physiological role for these cells.

Inhibition of bone resorption and stimulation of formation by mechanical loading of the modeling rat ulna in vivo.

During normal growth of the rat ulna, bone is resorbed from the medial periosteal surface. This occurs as part of the modeling process by which the bone achieves its adult shape. By attaching strain gauges to the ulnae of rats in vivo, we measured the strains imposed on that surface of the bone during normal locomotion. We then applied mechanical loads to the ulnae of other rats in vivo for 6 consecutive days, inducing strains approximately double those we had measured. Fluorochromes were given on the 1st and 5th days. The histology of the medial ulnar periosteal surface was correlated with the amount of fluorochrome incorporation and tartrate resistant acid phosphatase (TRAP) activity in serial sections. In the nonloaded ulnae, the surfaces were lined with bone resorbing cells. Corresponding areas of the loaded bones were lined with osteoid and osteoblasts. There was insignificant label incorporation in the nonloaded bones but almost continuous label incorporation in the corresponding regions of the loaded bones, which was significantly different from the nonloaded bones. TRAP activity of the periosteal cells in the loaded bones was significantly less than in the nonloaded limbs. It is widely acknowledged that loading induces bone formation, and this implies that it also has the ability to inhibit resorption. However, to date there has been little direct evidence for the inhibition of resorption in vivo by mechanical loading. The changes we have observed are similar to the sequence of cellular events that occur during the reversal phase of bone remodeling, in which osteoclastic resorption ceases and osteoblasts are recruited and begin formation. This model may help increase understanding of that process.