19F NMR Research Articles

Nucleophilic Fluoride Anion Delivery from Triazacyclononane-Supported Molecular Ca-F Complexes.

The major source of fluoride, namely calcium difluoride (CaF2), is derived from the mineral fluorspar. Recent advances in the activation of CaF2 via mechanochemical methods have inspired investigation of the fundamental properties of Ca-F bonds in molecular complexes. However, the paucity of well-defined molecular Ca-F-containing complexes undermines systematic understanding of the factors governing nucleophilic fluoride delivery. Here we report the use of a multidentate bis(phenoxide) ligand based on a 1,4,7-triazacyclononane (TACN) scaffold for the formation of well-defined Ca-F complexes and demonstrate their capabilities in fluoride delivery. Key to this synthesis is a desymmetrization step carried out on the TACN ligand within the Ca coordination sphere. A series of stable anionic dinuclear calcium fluoride complexes has then been accessed and characterized by NMR spectroscopy (critically by 19F NMR) and X-ray crystallography. Nucleophilic fluoride delivery can be used to generate C-F, Si-F and S-F bonds, with a notable advance over amide-derived ligand scaffolds being the reduced extent of side reactions derived from competing attack on the electrophile by the less nucleophilic O-donor anionic ligand set.

A facile and green procedure in preparing dibenzo-chromeno-phenazine-diones using an effectual and recyclable Brønsted acidic ionic liquid

First, a Brønsted acid ionic liquid (BAIL) in the role of a double acid-base called 1,3-n-propyl-bipyridinium bisulfonic acid-ditrifluoroacetate (PBPBSDT) was produced, and its skeleton was determined via TGA, mass, 13C NMR, 19F NMR, 1H NMR and FT-IR data. Further, it was successfully applied in the preparation of dibenzo-chromeno-phenazine-dione derivatives (1a-12a, 9–15 min, 90–98%) via one-pot multicomponent domino reaction among 2 mmol 2-hydroxynaphthalene-1,4-dione, 1 mmol benzene-1,2-diamine, and 1 mmol aldehydes under optimal conditions (5 mol% of PBPBSDT, solvent-free, 60 °C). The proper reproducibility of the PBPBSDT homogeneous catalyst (5 times), solvent-free medium, reasonable TON (Turnover Number) and TOF (Turnover Frequency) numbers, the non-metallic framework of the catalyst, and the formation of C-N, C = N, C-C, C = C, C-O bonds in a single operation are the distinct advantages of this protocol.

Insights into the Structure and Dynamics of Proteins from 19F Solution NMR Spectroscopy.

19F NMR spectroscopy has recently witnessed a resurgence as an attractive analytical tool for the study of the structure and dynamics of biomolecules in vitro and in cells, despite reports of its applications in biomolecular NMR since the 1970s. The high gyromagnetic ratio, large chemical shift dispersion, and complete absence of the spin 1/2 19F nucleus from biomolecules results in background-free, high-resolution 19F NMR spectra. The introduction of 19F probes in a few selected locations in biomolecules reduces spectral crowding despite its increased line width in comparison to typical 1H NMR line widths and allows rapid site-specific measurements from simple 1D spectra alone. The design and synthesis of novel 19F probes with reduced line widths and increased chemical shift sensitivity to the surrounding environment, together with advances in labeling techniques, NMR methodology, and hardware, have overcome several drawbacks of 19F NMR spectroscopy. The increased interest and widespread use of 19F NMR spectroscopy of biomolecules is gradually establishing it as a sensitive and high-resolution probe of biomolecular structure and dynamics, supplementing traditional 13C/15N-based methods. This Review focuses on the advances in 19F solution NMR spectroscopy of proteins in the past 5 years, with an emphasis on novel 19F tags and labeling techniques, NMR experiments to probe protein structure and conformational dynamics in vitro, and in-cell NMR applications.

Supramolecular Polymerization of Pseudo[2]rotaxanes Formation of per‐Imidazole Pillar[5]arene‐based Host–Guest Complexations and Halogen Bonding Interactions

AbstractIn this study, we reported the construction of 3D supramolecular polymeric networks using per‐imidazole pillar[5]arene (DIMP5) as a host and 1,4‐diiodotetrafluorobenzene (L) as a halogen bond donor in chloroform. The supramolecular polymerization process was characterized by 1H NMR, 19F NMR spectroscopy, and X‐ray single crystal analysis. The C─I⋯N distance (2.78 Å) and C─I⋯N angle (177°) clearly indicated the formation of halogen bonds in the crystal structure. Meanwhile, by introducing adiponitrile (G) as the guest, a supramolecular polymerization of pseudo[2]rotaxanes was also prepared, which was driven by DIMP5‐based host–guest complexations and halogen bonding interactions.

Structural Insight into Ionogels: A Case Study of 1-Methyl-3-octyl-imidazolium Tetrafluoroborate Confined in Aerosil.

Ionogels were obtained by impregnating Aerosil A380 with 1-methyl-3-octyl-imidazolium tetrafluoroborate (OMIM BF4) ionic liquid (IL). The IL content of the ionogels varied from 16.3 to 79.9 mol %. There was evidence of the confinement of the IL in silica in the shift and broadening of the BF4- 19F NMR signal and in the noticeable (∼50 °C) decrease in the temperature of IL decomposition. For both the ionogels and the pure IL, the frequencies of IR vibrations were different, providing further evidence of the confinement effect. An analysis of textural characteristics revealed that, upon its addition to Aerosil, the IL sequentially adsorbed in the micropores, mesopores and interparticle space. SAXS measurements showed that, in the confined IL, the size of nonpolar correlations substantially increased, from 21.5 Å in the bare IL to 25.6 Å in the ionogel containing 28.1 mol % IL. Unexpectedly, for the ionogel with the lowest IL content (16.3 mol %), no nonpolar correlations were observed, indicating the strong distortion of the structure of the confined ionic liquid. To the best of the authors' knowledge, this is the first report on regular changes in nonpolar correlations in ionic liquids upon confinement in a porous solid. These structural correlations can easily be tuned by simply changing the IL content in the ionogel material.

Late-Stage Fluorination of Tyrosine Residues in Antiviral Protein Cyanovirin-N.

The applications of fluorinated molecules in chemical biology are rapidly expanding driven by the unique properties of C-F bonds, leading to increased interest in methodologies for controlled introduction of this atom. In this study, we present the first method for late-stage fluorination of tyrosine residues in proteins. Our results demonstrate that electrophilic fluorination using Selectfluor, a stable and non-toxic reagent, offers a straightforward and cost-effective method for labeling Cyanovirin-N (CVN), a 101-amino-acid lectin with effective antiviral activity. Uni- and bidimensional 1H, 13C and 19F NMR analyses, along with mass spectrometry, revealed chemoselective fluorination of the three tyrosine residues in CVN without affecting its overall structure or mannose-binding affinity. Additionally, we observed that other aromatic amino acids, such as tryptophan, phenylalanine, and histidine, are not fluorinated using this method. These findings advance our understanding of protein fluorination and its applications in studying structure, dynamics, and interactions, as well as other biological utilities.

Integrating 19F Distance Restraints for Accurate Protein Structure Determination by Magic Angle Spinning NMR Spectroscopy.

Traditional protein structure determination by magic angle spinning (MAS) solid-state NMR spectroscopy primarily relies on interatomic distances up to 8 Å, extracted from 13C-, 15N-, and 1H-based dipolar-based correlation experiments. Here, we show that 19F fast (60 kHz) MAS NMR spectroscopy can supply additional, longer distances. Using 4F-Trp,U-13C,15N crystalline Oscillatoria agardhii agglutinin (OAA), we demonstrate that judiciously designed 2D and 3D 19F-based dipolar correlation experiments such as (H)CF, (H)CHF, and FF can yield interatomic distances in the 8-16 Å range. Incorporation of fluorine-based restraints into structure calculation improved the precision of Trp side chain conformations as well as regions in the protein around the fluorine containing residues, with notable improvements observed for residues in proximity to the Trp pairs (W10/W17 and W77/W84) in the carbohydrate-binding loops, which lacked sufficient long-range 13C-13C distance restraints. Our work highlights the use of fluorine and 19F fast MAS NMR spectroscopy as a powerful structural biology tool.

Structures of a DNA Polymerase Caught while Incorporating Responsive Dual-Functional Nucleotide Probes.

Functionalizing nucleic acids using DNA polymerases is essential in biophysical and biotechnology applications. This study focuses on understanding how DNA polymerases recognize and incorporate nucleotides with diverse chemical modifications, aiming to develop advanced nucleotide probes. We present the crystal structures of ternary complexes of Thermus aquaticus DNA polymerase (KlenTaq) with C5-heterocycle-modified environment-sensitive 2'-deoxyuridine-5'-triphosphate (dUTP) probes. These nucleotides include SedUTP, BFdUTP and FBFdUTP, which bear selenophene, benzofuran and fluorobenzofuran, respectively, at the C5 position of uracil, and exhibit high conformational sensitivity. SedUTP and FBFdUTP serve as dual-app probes, combining a fluorophore with X-ray anomalous scattering Se or 19F NMR labels. Our study reveals that the size of the heterocycle influences how DNA polymerase families A and B incorporate these modified nucleotides during single nucleotide incorporation and primer extension reactions. Remarkably, FBFdUTP's responsiveness enabled real-time monitoring of the binary complex formation and polymerase activity through fluorescence and 19F NMR. Comparative analysis of incorporation profiles, fluorescence, 19F NMR data, and crystal structures of ternary complexes highlights the enzyme's plasticity. Key insights are provided into the role of gatekeeper amino acids (Arg660 and Arg587) in accommodating and processing these modified substrates, offering a structural basis for next-generation nucleotide probe development.

Structures of a DNA Polymerase Caught while Incorporating Responsive Dual‐Functional Nucleotide Probes

Functionalizing nucleic acids using DNA polymerases is essential in biophysical and biotechnology applications. This study focuses on understanding how DNA polymerases recognize and incorporate nucleotides with diverse chemical modifications, aiming to develop advanced nucleotide probes. We present the crystal structures of ternary complexes of Thermus aquaticus DNA polymerase (KlenTaq) with C5‐heterocycle‐modified environment‐sensitive 2′‐deoxyuridine‐5′‐triphosphate (dUTP) probes. These nucleotides include SedUTP, BFdUTP and FBFdUTP, which bear selenophene, benzofuran and fluorobenzofuran, respectively, at the C5 position of uracil, and exhibit high conformational sensitivity. SedUTP and FBFdUTP serve as dual‐app probes, combining a fluorophore with X‐ray anomalous scattering Se or 19F NMR labels. Our study reveals that the size of the heterocycle influences how DNA polymerase families A and B incorporate these modified nucleotides during single nucleotide incorporation and primer extension reactions. Remarkably, FBFdUTP's responsiveness enabled real‐time monitoring of the binary complex formation and polymerase activity through fluorescence and 19F NMR. Comparative analysis of incorporation profiles, fluorescence, 19F NMR data, and crystal structures of ternary complexes highlights the enzyme's plasticity. Key insights are provided into the role of gatekeeper amino acids (Arg660 and Arg587) in accommodating and processing these modified substrates, offering a structural basis for next‐generation nucleotide probe development.

Where Fluoride Is Present, Hexafluorosilicate Might Be Encountered: Supramolecular Binding of the SiF6 2- Anion by Nanojars.

While the fact that HF etches glass is rather common chemical knowledge, the reaction of fluoride ions in an organic solvent with glassware under alkaline conditions has not yet been documented. It becomes apparent that, in general, whenever any fluorine-containing material is handled in silicon-based glassware, the possible presence of SiF6 2- should be considered regardless of the pH of the reaction medium. Subsequent to the initial, inadvertent synthesis by the reaction of CuF2 with laboratory glassware, hexafluorosilicate-entrapping supramolecular assemblies (nanojars) of the formula [SiF6⊂{cis-CuII(μ-OH)(μ-pz)} n ]2- (Cu n SiF 6 ; n = 28, 30, 32, 34) were rationally prepared by the reaction of Cu2+ with pyrazole (Hpz) in the presence of a base and SiF6 2- ions or by combining Cu n CO 3 with H2SiF6 or HF. This work demonstrates that nanojars are excellent anion-binding agents not only for trigonal planar/pyramidal or tetrahedral anions but also for larger, octahedral anions, which are bound exclusively by charge-assisted hydrogen bonds. The SiF6 2- anion guest is preferentially bound by a larger Cu32 host, whereas CO3 2- favors a smaller Cu27 nanojar. The Cu n SiF 6 mixture was characterized by electrospray ionization mass spectrometry as well as variable-temperature, paramagnetic 1H and 19F NMR spectroscopy in solution, complemented by single-crystal X-ray diffraction studies in the solid state, which reveal the unprecedented structure of a Cu8+14+10 nanojar (where Cu8, Cu10, and Cu14 are the component Cu x metallamacrocycles of the Cu32 nanojar).

Evaluation of machine learning models for the accelerated prediction of density functional theory calculated 19F chemical shifts based on local atomic environments

The introduction of fluorine in compounds plays a crucial role in drug development as it greatly influences their final pharmacokinetic and dynamic properties. Due to the prevalence of fluorine in FDA-approved drugs in recent years, identifying the mechanisms driving their chemical transformations has become crucial in the drug discovery landscape. 19F NMR spectroscopy is a powerful analytical technique that allows for the examination of fluorine-containing compounds, offering valuable information about their structure, dynamics, and reactivity. NMR spectra can be interpreted through the leveraging of Density Functional Theory (DFT). However, the screening of compounds and discovery of feasible drug candidates is limited due to its computational cost. Here, we present a machine learning approach to accelerate the prediction of DFT-calculated 19F NMR chemical shifts. The fluorine atoms’ features in the models were derived from their local three-dimensional environments, representing their neighboring atoms within a radius of n Å away from the given fluorine atom in the compound. A comparative analysis of thirteen regression models was conducted using features extracted from 501 fluorinated compounds in our laboratory’s chemical inventory. Among the models, Gradient Boosting Regression (GBR) exhibited the highest performance, achieving a mean absolute error of 3.31 ppm with a local environment radius of 3 Å. This demonstrates a comparable accuracy to DFT calculations while reducing computational time from several hundred seconds to milliseconds. 3 Å was also found to be the most optimal radius across all models when encoding features for local atomic environments.

Activatable Multiplexed 19F NMR Probes for Dynamic Monitoring of Biomarkers Associated with Cellular Senescence.

Simultaneous detection of multiple biomarkers is crucial to achieve specific and dynamic analysis of cellular senescence, given its intrinsic high heterogeneity. Current approaches for senescence detection largely rely on fluorescence imaging, but fluorescent probes inevitably suffer from issues including autofluorescence and spectral overlap when being applied for the simultaneous detection of multiple biomarkers. Herein, we report an alternative strategy and design activatable multiplexed senoprobes based on 19F NMR for dynamic monitoring of cellular senescence. Differing from previous approaches, our strategy has two unique advantages. First, this strategy utilizes the changes in the 19F chemical shift as the signal output, which features by its fingerprint and quantifiable characters, thereby significantly enhancing the detection throughput toward biomarkers with minimized spectral overlapping. Second, the background signal is minimized, benefiting from the extremely low abundance of F in biological samples, and the detection accuracy can thus be improved. As a proof of concept, two activatable 19F NMR molecular probes are synthesized that specially respond to two key senescence-associated biomarkers (β-gal and ROS) and have been successfully demonstrated for dynamical and quantitative assessment of the changes of these biomarkers in different cellular models of senescence, without causing obvious cytotoxicity. Owing to the flexible molecular design, this work may offer a useful platform to create diversified 19F NMR senoprobes for deep understanding of cellular senescence across a wide range of aging-related diseases.

19F NMR relaxation of buried tryptophan side chains suggest anisotropic rotational diffusion of the protein RfaH.

The recent application of 19F NMR in the study of biomolecular structure and dynamics has made it a potentially attractive probe to complement traditional 15N/13C labelled probes for backbone and sidechain dynamics, albeit with some complications. The utility of 15N relaxation rates of rigid backbone amide groups to determine the rotational diffusion tensor of proteins is well established. Here we show that the measured 19F relaxation rates of two buried and possibly immobile 19F labelled tryptophan sidechains for the multidomain protein RfaH, in its closed conformation, are in reasonable agreement with the calculated values, only when anisotropic rotational diffusion of the protein is considered. While the sparsity of 19F relaxation data from a limited number of probes precludes the experimental determination of the rotational diffusion tensor here, these results demonstrate the influence of rotational diffusion anisotropy of proteins on 19F NMR relaxation of rigid tryptophan sidechains, while adding to the expanding literature of 19F NMR relaxation data sets in biomolecules.

Determination of the pKa Value of a Brønsted Acid by 19F NMR Spectroscopy.

Brønsted acids, such as phosphoric acids derived from chiral 1,1'-bi-2-naphthol (BINOL), are important catalysts in the formation of carbon-carbon and carbon-heteroatom bonds, for example. The catalytic activity of these Brønsted acids is strongly linked to their acidity, and as such, the evaluation of compounds to determine pKa values provides insight into their catalytic activity. Herein, a 19F{1H} NMR methodology is detailed to determine the pKa of a fluorinated binaphthyl-derived phosphinic acid, rac-1, in acetonitrile and in the presence of a fluorinated sulfonamide reference compound (2-4). The approach was tested initially using 2 and 3, with the ΔpKa (0.08) in strong agreement with previously reported values (6.6 for 2 and 6.68/6.73 for 3). Sigmoidal curves of normalised chemical shift change (Δδ) against equivalents of the base phosphazene P1-tBu added overlapped for 2 and 3, but in the case of rac-1 and either 2, 3 or 4, there was significant separation. A variety of different approaches for determining the ΔpKa were compared. Values of pKa determined when the normalised Δδ was 90% were optimal for 2 and 3, whereas a normalised Δδ of 75% was optimal for 4, resulting in the pKa of rac-1 being determined to be 8.47-8.71.

19F-Labeled NMR Probes for the Detection and Discrimination of Nitrogen-Containing Analytes

The development of 19F-labeled NMR probes has become a pivotal tool in analytical chemistry. Recent advancements in probe design enable precise identification of nitrogen-containing analytes, significantly enhancing the analysis of these biologically important analytes in complex mixtures. This review highlights recent progress with probes based on covalent derivatization and dynamic exchange strategies, which yield distinct 19F NMR signals for each nitrogen-containing analyte. These strategies facilitate separation-free multicomponent analysis and chiral discrimination. Discussions will cover design principles, scope, limitations, and strategies to enhance sensitivity and resolving ability. By addressing current challenges, 19F-labeled NMR probes hold the potential to revolutionize the detection of biologically relevant molecules, catalyzing new discoveries in chemical and biochemical research.

Highly enhanced fluoride removal from aqueous systems via solvent extraction utilizing trialkyl phosphine oxide as an efficient extractant

Solvent extraction (SX) has been recognized as an efficient approach for the large-scale removal of impurities, demonstrating considerable potential for fluoride extraction in industrial applications. However, existing fluoride extraction methods typically require the incorporation of additives to form complexes with fluoride for its removal. Due to the excessive additive requirements for efficient fluoride removal, these methods inevitably result in secondary contamination of feed solution, necessitating additional purification efforts to remove them. In this study, four extractants (trioctyl amine, tributyl phosphate, trioctyl phosphate, and trialkyl phosphine oxide (TRPO)) were investigated for fluoride removal via hydrogen bonding with hydrofluoric acid (HF). Various parameters, including the concentrations of extractants and stripping agents, pH values, extraction time, and temperature were initially optimized. It was found that TRPO exhibits the highest extraction efficiency for HF, with a single-stage extraction rate exceeding 70 %. Complete fluoride removal (> 99.9 %) was achieved through a consecutive four-stage extraction process. Further experiments, including maximum loading and slope analysis, combined with FT-IR and 19F NMR characterization, and DFT calculations elucidate the mechanism of the extraction. The transfer of HF into the organic phase is accomplished by the formation of a 1:1 hydrogen-bonded complex with TRPO. The loaded fluoride in the organic phase can be easily stripped by a base to get a fluoride salt. This study paves the way for the construction of novel SX systems to remove fluoride as HF.

Potent Biological Activity of Fluorinated Derivatives of 2-Deoxy-d-Glucose in a Glioblastoma Model.

One defining feature of various aggressive cancers, including glioblastoma multiforme (GBM), is glycolysis upregulation, making its inhibition a promising therapeutic approach. One promising compound is 2-deoxy-d-glucose (2-DG), a d-glucose analog with high clinical potential due to its ability to inhibit glycolysis. Upon uptake, 2-DG is phosphorylated by hexokinase to 2-DG-6-phosphate, which inhibits hexokinase and downstream glycolytic enzymes. Unfortunately, therapeutic use of 2-DG is limited by poor pharmacokinetics, suppressing its efficacy. To address these issues, we synthesized novel halogenated 2-DG analogs (2-FG, 2,2-diFG, 2-CG, and 2-BG) and evaluated their glycolytic inhibition in GBM cells. Our in vitro and computational studies suggest that these derivatives modulate hexokinase activity differently. Fluorinated compounds show the most potent cytotoxic effects, indicated by the lowest IC50 values. These effects were more pronounced in hypoxic conditions. 19F NMR experiments and molecular docking confirmed that fluorinated derivatives bind hexokinase comparably to glucose. Enzymatic assays demonstrated that all halogenated derivatives are more effective HKII inhibitors than 2-DG, particularly through their 6-phosphates. By modifying the C-2 position with halogens, these compounds may overcome the poor pharmacokinetics of 2-DG. The modifications seem to enhance the stability and uptake of the compounds, making them effective at lower doses and over prolonged periods. This research has the potential to reshape the treatment landscape for GBM and possibly other cancers by offering a more targeted, effective, and metabolically focused therapeutic approach. The application of halogenated 2-DG analogs represents a promising advancement in cancer metabolism-targeted therapies, with the potential to overcome current treatment limitations.

Sumoylation of thymine DNA glycosylase impairs productive binding to substrate sites in DNA

The base excision repair enzyme thymine DNA glycosylase (TDG) protects against mutations by removing thymine or uracil from guanine mispairs and functions in active DNA demethylation by excising 5-formylcytosine (fC) and 5-carboxylcytosine (caC). Post-translational modification of TDG by SUMO (small ubiquitin-like modifier) reduces its glycosylase activity but the mechanism remains unclear. We investigated this problem using biochemical and biophysical approaches and a TDG construct comprising residues 82-340 (of 410) that includes the SUMOylation site and the motif for non-covalent SUMO binding. Single turnover kinetics experiments were collected at multiple enzyme concentrations ([E]) and the hyperbolic dependence of activity (kobs) on [E] yielded the maximal glycosylase activity (kmax), the enzyme concentration giving half-maximal activity (K0.5), and the catalytic efficiency (kmax/K0.5). Sumoylation of TDG (or TDG82-340) causes large reductions in catalytic efficiency for G·T, G·U, G·fC, and G·caC DNA substrates, due largely to weakened substrate affinity (increased K0.5). 19F NMR experiments show that sumoylation of TDG82-340 reduces productive binding to G·U mispairs and dramatically impairs binding to G·T mispairs. A mutation in the TDG SUMO-interacting motif (SIM), E310Q, shown previously to perturb noncovalent binding of SUMO to unmodified TDG, rescues the glycosylase activity of sumoylated TDG82-340. Similarly, NMR studies show the mutation restores productive binding of sumoylated TDG82-340 to G·U and G·T pairs. Together, the results indicate that intramolecular SUMO-SIM interactions mediate the adverse effect of sumoylation on TDG activity and suggest a model whereby the disruption of SUMO-SIM interactions enables productive binding of sumoylated TDG to substrate sites in DNA.

Prediction, Design, Synthesis, Insecticidal Activities of Polysubstituted Pyridine Anthranilic Amide Derivatives

Based on the predicted structure, a series of polysubstituted pyridine compounds containing 5-(furan-2-yl)-1H-pyrazole-3-carboxamido were designed and synthesized. These compounds were characterized using 1H NMR, 13C NMR, 19F NMR and HRMS. The results of the bioassays indicated that certain compounds exhibited promising activities against Mythimna separata and Plutella xylostella. It is noteworthy that compound I-6 exhibited 47% insecticidal activity at a concentration of 0.01 μg/mL, which reached the same activity level as chlorantraniliprole (CHL).Moreover, the cytotoxicity experiment showed compound I-26 demonstrated 50% larvicidal activity against M. separata at 10 μg/mL. Moreover, the toxicity of I-26 (IC50 0.007365 μg/mL) was superior to that of CHL (IC50 1.059 μg/mL). Furthermore, molecular docking was employed to predict the binding positions of the compounds, which demonstrated a good correlation between their insecticidal activities and their binding values. Finally, DFT calculations and molecular docking were employed to refine the binding sites of the ryanodine receptors in M. separata with CHL and I-24. The research laid a foundation for the innovation of RyR insecticides in the future.

Removal and recovery of phosphorus and fluorine in process water from water based direct physical lithium-ion battery recycling

In the present work, the recovery of phosphorus and fluorine from process water generated in a water based direct physical recycling process of Li-ion batteries has been studied. The recycling process considered in this work produces significant amounts of process water, which is generated during the opening of the batteries by means of electro-hydraulic fragmentation and the subsequent sorting of the components in aqueous solution. This process produces between 21.6 L and 30.3 L of process water per kg of batteries with a total phosphorus and a total fluorine concentration of 60–85 mg/L and 120–470 mg/L, respectively. Currently, the process water has to be disposed of as hazardous waste. The goal is to discharge the wastewater into the sewer system. For this the total phosphorus and total fluorine concentration must be reduced. The process water is mainly contaminated by the released electrolyte consisting of organic carbonates and conducting salts. 31-P and 19-F NMR shows conclusively that no hydrolysis takes place in this process water. The phosphorus is present exclusively in the form of the complex anion PF6- and fluorine as F-, namely as FSI- from the conducting salt LiFSI and PF6- from the conducting salt LiPF6. In order to meet the regulatory requirements for discharge into the sewage system, 70.4% of the phosphorus and 89.3% of the fluorine must be removed. The conducting salts are hydrolyzed by adding acid and thereby phosphate and fluoride are precipitated. After critical and valuable materials are recovered the process water can be discharged into the sewer system.