Excited State Fluorescence Research Articles

Different functional groups dependent fluorescent properties for ESIPT-based ABTN derivatives: A theoretical study

On the basis of density functional theory (DFT) and time-dependent DFT (TD-DFT), 2-amino-3-(benzo[d]thiazol-2-yl)benzaldehyde derivatives (ABTN-1, ABTN-2, ABTN-3) are selected as models to theoretically explore the effect of different functional groups on the fluorescent properties and excited state intramolecular proton transfer (ESIPT) behavior. The optimized configurations, infrared vibrational frequencies and topological parameters are used to analyze the intensity of intramolecular hydrogen bond (IHB). The absorption and fluorescence emission spectra are simulated, and the frontier molecular orbital as well as electron-hole distribution are investigated. In addition, the ground state (S0) and excited state (S1) potential energy curves (PECs) are constructed. The–CN group has little effect on the absorption and fluorescence wavelengths of ABTN. The –N(CH3)2 group red-shifts the absorption and fluorescence wavelengths exceeding 100 nm. The coexistence of –CN and –N(CH3)2 groups has almost the same effect on the absorption and fluorescence peaks as the–N(CH3)2 group.

Theoretical study of the photoisomerization of 1,2-bispyrazinyl-ethylene and the halogen ion salts of 1-Pyrazinyl-2-(4’-methylpyrazinyl)ethylene

ContextIt has been reported that photoexcitation of azastilbene compounds like E-1,2-bispyrazinyl-ethylene (bpe) can undergo E → Z photoisomerization of its quaternary salts via the excited triplet state. However, experimentally it is possible to get low fluorescence and photoisomerisation quantum yields in a state with higher internal conversion than intersystem crossing. We modelled bpe and its methylated derivative (bpeMe), as well as its quaternary halogen salts (bpeMeX with X = F−, Cl−, Br− and I−) to study levels of fluorescence, phosphorescence and excited state potential energy surfaces (PES). Results support experimental observations of molecules where the anion of a salt is an efficient electron donor, that molecules with weak electron-donating anions like Cl− to give increased fluorescence and photoisomerization, as compared to molecules with stronger electron-donating anions like I−, which are dominated by competing electron transfer. The fluorescence of bpeMeF and bpeMeCl was found to be stronger than bpeMeBr and bpeMeI. A deep well in the triplet excited state of bpeMeI is considered responsible for the decreased photoisomerization, compared to what was experimentally observed for bpeMeCl. Uniquely, the bpeMeI molecule is characterised by near-zero splitting of the s1 and t1 excited states that can enhance charge transfer. The quaternary salt of bpeMe with stronger electron-donating Br− anion was observed to undergo fluorescence and phosphorescence at much lower energy compared to those with weak electron-donating F− and Cl− anions. This research shows how to control the excited state fluorescence, phosphorescence and isomerization of quaternary halogen salts of methyl derivatives of 1,2-bispyrazinyl-ethylene, which aids experimental design where excited state isomerization is considered.MethodsGeometry optimization, molecular electrostatic potential (MESP), and time dependent density functional theory (TDDFT) calculations were conducted utilizing Gaussian 16 with the B3LYP functional and the 6–31 + G(d,p) basis set. The minimum energy path (MEP) for the E to Z isomerization of the molecules was established employing the Nudged-Elastic-Band (NEB) method, implemented in Orca 4.2. Precise energies of the E → Z isomerization reaction path were determined employing CASSCF and a more accurate multireference method, NEVPT2.

Photodynamics of azaindoles in polar media: the influence of the environment.

We have studied the relaxation dynamics of a family of azaindole (AI) structural isomers, 4-, 5-, 6- and 7-AI, by steady-state and time-resolved methods (fs-transient absorption and fluorescence up-conversion), in solvents of different polarity. The measurements in aprotic solvents show distinctive fluorescence yields and excited state lifetimes among the isomers, which are tuned by the polarity of the medium. Guided by simple TD-DFT calculations and based on the behavior observed in the isolated species, it has been possible to address the influence of the environment polarity on the relaxation route. According to the obtained picture, the energy of the nπ* state, which is strongly dependent on the position of the pyridinic nitrogen, controls the rate of the internal conversion channel that accounts for the distinctive photophysical behavior of the isomers. On the other hand, preliminary measurements in protic media (methanol) show a very different photodynamical behavior, in which the anomalous measured fluorescent patterns are very likely the result of reactive channels (proton transfer) triggered by the electronic excitation.

Chalcone derivatives' interaction with human serum albumin and cyclooxygenase-2.

Chalcone derivatives are an extremely valuable class of compounds, primarily due to the keto-ethylenic group, CO-CH[double bond, length as m-dash]CH-, they contain. Moreover, the presence of a reactive α,β-unsaturated carbonyl group confers upon them a broad range of pharmacological properties. Recent developments in heterocyclic chemistry have led to the synthesis of chalcone derivatives, which have been biologically investigated for their activity against certain diseases. In this study, we investigated the binding of new chalcone derivatives with COX-2 (cyclooxygenase-2) and HSA (Human Serum Albumin) using spectroscopic and molecular modeling studies. COX-2 is commonly found in cancer and plays a role in the production of prostaglandin E (2), which can help tumors grow by binding to receptors. HSA is the most abundant protein in blood plasma, and it transports various compounds, including hormones and fatty acids. The conformation of chalcone derivatives in the HSA complex system was established through fluorescence steady and excited state spectroscopy techniques and FTIR analyses. To gain a more comprehensive understanding, molecular docking, and dynamics were conducted on the target protein (COX-2) and transport protein (HSA). In addition, we conducted density-functional theory (DFT) and single-point DFT to understand intermolecular interaction in protein active sites.

Diphenyl ditelluride assisted synthesis of noble metal-based silver-telluride 2D organometallic nanofibers with enhanced aggregation-induced emission (AIE) after oleylamine treatment

Silver-Telluride 2D organometallic nanofibers (NFs), using diphenyl ditelluride (DPDT) as a precursor, were synthesized. The synthesis was carried out by reacting DPDT with AgNO3 in acetonitrile at room temperature (RT) under an inert atmosphere. The resulting material was fully characterized using various techniques, including UV-VIS-NIR spectroscopy, steady-state and excited-state fluorescence spectroscopy, IR-FTIR-ATR spectroscopy, HR-ESI MS spectrometry, high-resolution transmission electron microscopy (HRTEM), BF-STEM or HAADF-STEM, confocal fluorescence microscopy images and conductivity measurements. Initially, the nanofibers were almost non-emissive. However, a remarkable modification was observed after treating the nanofibers with oleylamine under ultrasound treatment. This methodology induced an aggregation emission effect (AIE) in the solution and in the solid state, resulting in the formation of a highly red emissive fluorescent nanomaterial. This research provides valuable insights for developing new fluorescent materials with potential applications in various optical fields.

Molecular aggregation kinetics of Heteropolyene: An Experimental, topological and solvation dynamics studies

Herein, we have demonstrated the solvent specific ground state and excited state aggregates of the molecule ((1E,2E)-1,2-bis((E)-3-phenylallylidene)hydrazine: BISCH) in solution. The nature of aggregation at ground state and excited state is different in H2O solvent. The rate of aggregation in water is calculated from steady state absorption and fluorescence spectroscopy respectively. Excited state fluorescence behaviour contributed from aggregates and non-aggregates species have been identified by time resolved fluorescence spectroscopy in H2O. Aggregation is highly sensitive towards solvent polarity and nature of solvent. The effect of solvent on aggregation process has been discussed and explained on the basis of relative change of hydrophobic and hydrophilic interaction of solute-solvents in solution. Further, J-type aggregation of BISCH is also observed in H2O. Further, using 1st order aggregation kinetic model for ground and excited state,) aggregation rate constant has been calculated and found to 8.0x10-4s−1 ((kagg@312 nm) and 1.2x10-4s−1 (kagg@413 nm) respectively. Effect on molecular geometry depending upon Interaction sites of BISCH and solvent molecule is also discussed with the results from DFT calculation. NBO, NCI, DOS, MESP along with various topological analysis are performed for BISCH in water. For BISCH…water molecular system, NBO interaction is observed due to delocalization of lone pair of O35 and N36 to antibonding of H37-O38 and H40-O41, respectively. ELF, LOL, AIM and ALIE calculation are employed to locate the site and magnitude of hydrogen bonding interactions. The AIMD study for BISCH in water shows minimum of the total energy between 125 and 175 fs and 225–275 fs. N…H-O hydrogen bonding interactions such as N36-H40 and N35-H37 varies from 1.8 to 2.6 Å during the molecular dynamics simulation.

Engineering Metal-Organic Frameworks with Tunable Colors for High-Performance Wireless Communication.

Metal-organic frameworks (MOFs) have emerged as excellent platforms possessing tunable and controllable optical behaviors that are essential in high-speed and multichannel data transmission in optical wireless communications (OWCs). Here, we demonstrate a novel approach to achieving a tunable wide modulation bandwidth and high net data rate by engineering a combination of organic linkers and metal clusters in MOFs. More specifically, two organic linkers of different emission colors, but equal molecular length and connectivity, are successfully coordinated by zirconium and hafnium oxy-hydroxy clusters to form the desired MOF structures. The precise change in the interactions between these different organic linkers and metal clusters enables control over fluorescence efficiency and excited state lifetime, leading to a tunable modulation bandwidth from 62.1 to 150.0 MHz and a net data rate from 303 to 363 Mb/s. The fabricated color converter MOFs display outstanding performance that competes, and in some instances surpasses, those of conventional materials commonly used in light converter devices. Moreover, these MOFs show high practicality in color-pure wavelength-division multiplexing (WDM), which significantly improved the data transmission link capacity and security by the contemporary combining of two different data signals in the same path. This work highlights the potential of engineered MOFs as a game-changer in OWCs, with significant implications for future high-speed and secure data transmission.

Conformation of the Ester Group Governs the Photophysics of Highly Polarized Benzo[g]coumarins.

Photosensitizers that display "unusual" emission from upper electronically excited states offer possibilities for initiating higher-energy processes than what the governing Kasha's rule postulates. Achieving conditions for dual fluorescence from multiple states of the same species requires molecular design and conditions that favorably tune the excited-state dynamics. Herein, we switch the position of the electron-donating NMe2 group around the core of benzo[g]coumarins (BgCoum) and tune the electronic coupling and the charge-transfer character of the fluorescent excited states. For solvents with intermediate polarity, three of the four regioisomers exhibit fluorescence from two different excited states with bands that are well separated in the visible and the near-infrared spectral regions. Computational analysis, employing ab initio methods, reveals that the orientation of an ester on the pyrone ring produces two conformers responsible for the observed dual fluorescence. Studies with solid solvating media, which restricts the conformational degrees of freedom, concur with the computational findings. These results demonstrate how "seemingly inconsequential" auxiliary substituents, such as the esters on the pyrone coumarin rings, can have profound effects leading to "anti-Kasha" photophysical behavior important for molecular photonics, materials engineering, and solar-energy science.

Concerning the photophysics of fluorophores towards tailored bioimaging compounds: a case study involving S100A9 inflammation markers.

A full understanding concerning the photophysical properties of a fluorescent label is crucial for a reliable and predictable performance in biolabelling applications. This holds true not only for the choice of a fluorophore in general, but also for the correct interpretation of data, considering the complexity of biological environments. In the frame of a case study involving inflammation imaging, we report the photophysical characterization of four fluorescent S100A9-targeting compounds in terms of UV-vis absorption and photoluminescence spectroscopy, fluorescence quantum yields (ΦF) and excited state lifetimes (τ) as well as the evaluation of the radiative and non-radiative rate constants (kr and knr,respectively). The probes were synthesized based on a 2-amino benzimidazole-based lead structure in combination with commercially available dyes, covering a broad color range from green (6-FAM) over orange (BODIPY-TMR) to red (BODIPY-TR) and near-infrared (Cy5.5) emission. The effect of conjugation with the targeting structure was addressed by comparison of the probes with their corresponding dye-azide precursors. Additionally, the 6-FAM and Cy5.5 probes were measured in the presence of murine S100A9 to determine whether protein binding influences their photophysical properties. An interesting rise in ΦF upon binding of 6-FAM-SST177 to murine S100A9 enabled the determination of its dissociation equilibrium constant, reaching up toKD = 324nM. This result gives an outlook for potential applications of our compounds in S100A9 inflammation imaging and fluorescence assay developments. With respect to the other dyes, this study demonstrates how diverse microenvironmental factors can severely impair their performance while rendering them poor performers in biological media, showing that a preliminary photophysical screening is key to assess the suitability of a particular luminophore.

Leveraging Coupled Solvatofluorochromism and Fluorescence Quenching in Nitrophenyl-Containing Thiazolothiazoles for Efficient Organic Vapor Sensing.

Solvatofluorochromic molecules provide strikingly high fluorescent outputs to monitor a wide range of biological, environmental, or materials-related sensing processes. Here, thiazolo[5,4-d]thiazole (TTz) fluorophores equipped with simple alkylamino and nitrophenyl substituents for solid-state, high-performance chemo-responsive sensing applications are reported. Nitroaromatic substituents are known to strongly quench dye fluorescence, however, the TTz core subtly modulates intramolecular charge transfer (ICT) enabling strong, locally excited-state fluorescence in non-polar conditions. In polar media, a planar ICT excited-state shows near complete quenching, enabling a twisted excited-state emission to be observed. These unique fluorescent properties (spectral shifts of 0.13 - 0.87eV and large transition dipole moments Δµ = 20.4 - 21.3 D) are leveraged to develop highly sought-after chemo-responsive, organic vapor optical sensors. The sensors are developed by embedding the TTz fluorophores within a poly(styrene-isoprene-styrene) block copolymer to form fluorescent dye/polymer composites (ΦF = 70 - 97%). The composites respond reversibly to a comprehensive list of organic solvents and show low vapor concentration sensing (e.g., 0.04% solvent saturation vapor pressure of THF - 66ppm). The composite films can distinguish between solvent vapors with near complete fluorescent quenching observed when exposed to their saturated solvent vapor pressures, making this an extremely promising material for optical chemo-responsive sensing.

Spectroscopic characterization of the interactions between poly(2-(trimethylamino)ethyl methacrylate) chloride and the xanthene dyes, 2′, 7′-difluorofluorescein and 2, 4, 5, 7-tetraiodofluorescein

Intermolecular interactions in buffered aqueous solution between the polycation, poly(2-(trimethylamino)ethyl methacrylate) chloride (pTMAEMC) and two anionic xanthene dyes, 2′, 7′-difluorofluorescein (Oregon Green 488) and 2, 4, 5, 7-tetraiodofluorescein (Erythrosin B), are characterized using multiple optical spectroscopic methods. Visible absorption spectroscopy indicates the formation of ground-state pTMAEMC-dye complexes. Benesi-Hildebrand binding isotherm analysis of visible absorption spectra for pTMAEMC-dye mixtures quantifies the strength of binding interactions producing the complexes. For both Oregon Green 488 (OG) and Erythrosin B (EB) in mixtures with pTMAEMC, the concentration of the solution’s sodium acetate buffer at a fixed pH alters the binding constants, Kb, suggesting that ionic strength plays a key role in determining the binding affinity of pTMAEMC for the dyes. Comparison of Kb, for the dyes indicates stronger binding of EB under all solution conditions. Steady-state fluorescence emission spectroscopy, fluorescence quenching, excited-state fluorescence lifetime measurements and fluorescence correlation spectroscopy provide complementary data for the interactions between pTMAEMC and the dyes. Mixtures of pTMAEMC with the dyes produce fluorescence enhancements and fluorescence quenching which exhibit a dependence on the buffer concentration used in the mixture. Excited-state lifetime analysis indicates that OG interacts with pTMAEMC through ground-state interactions while EB exhibits both ground-state and excited-state interactions with pTMAEMC. The spectroscopic measurements suggest that a polyelectrolyte effect for pTMAEMC due to ionic strength variation produced by the buffer concentration affects the dye binding profile of the polycation. This conclusion is supported by fluorescence correlation spectroscopy (FCS) analyses of the hydrodynamic diameter changes in pTMAEMC-OG binding in low buffer concentration (low ionic strength) solution. FCS analyses of pTMAEMC-OG mixtures also reveal diversity in the complexes formed in low ionic strength solution suggesting that other xanthene dyes will exhibit similar binding behaviors in mixtures with pTMAEMC as a function of solution ionic strength.

Benchmarking DFT functionals for photophysics of pyranoflavylium cations

An intense absorption, phosphorescence, a long triplet excited state lifetime and singlet oxygen generation capabilities are characteristics of pyranoflavylium cations, analogues to pyranoanthocyanidins originated in the maturation process of red wine. Such properties make these compounds potential photosensitizers to be applied in photodynamic therapy. In this context, the photophysical processes underlying that treatment critically depend on the electronic structure of the pyranoflavylium molecules. When employing density functional theory to describe the electronic structure of molecules, the choice of the most suitable functional is not trivial, and benchmark studies are needed to orient practitioners in the field. In this work, a benchmark of seven of the most commonly used density functionals in addressing the photophysical properties of a set of eight pyranoflavylium cations is reported. Ground and excited state geometries, molecular orbitals, and absorption, fluorescence and phosphorescence transition energies were calculated using density functional theory approaches, and evaluated and compared to experimental data and monoreferential wave function-based methodologies. Statistical analysis of the results indicates that global-hybrid functionals allow an excellent description of absorption and emission energies, with errors around 0.05 eV, while range-separated variants led to somewhat larger errors in the range 0.1–0.2 eV. In contrast, range-separated functionals display excellent phosphorescence energies with errors close to 0.05 eV, in this case global-hybrids showing increased discrepancies around 0.5–0.1 eV.

Sensitizer-controlled photochemical reactivity via upconversion of red light.

By combining the energy input from two red photons, chemical reactions that would normally require blue or ultraviolet irradiation become accessible. Key advantages of this biphotonic excitation strategy are that red light usually penetrates deeper into complex reaction mixtures and causes less photo-damage than direct illumination in the blue or ultraviolet. Here, we demonstrate that the primary light-absorber of a dual photocatalytic system comprised of a transition metal-based photosensitizer and an organic co-catalyst can completely alter the reaction outcome. Photochemical reductions are achieved with a copper(i) complex in the presence of a sacrificial electron donor, whereas oxidative substrate activation occurs with an osmium(ii) photosensitizer. Based on time-resolved laser spectroscopy, this changeover in photochemical reactivity is due to different underlying biphotonic mechanisms. Following triplet energy transfer from the osmium(ii) photosensitizer to 9,10-dicyanoanthracene (DCA) and subsequent triplet-triplet annihilation upconversion, the fluorescent singlet excited state of DCA triggers oxidative substrate activation, which initiates the cis to trans isomerization of an olefin, a [2 + 2] cycloaddition, an aryl ether to ester rearrangement, and a Newman-Kwart rearrangement. This oxidative substrate activation stands in contrast to the reactivity with a copper(i) photosensitizer, where photoinduced electron transfer generates the DCA radical anion, which upon further excitation triggers reductive dehalogenations and detosylations. Our study provides the proof-of-concept for controlling the outcome of a red-light driven biphotonic reaction by altering the photosensitizer, and this seems relevant in the greater context of tailoring photochemical reactivities.

Nano-bio interaction between human immunoglobulin G and nontoxic, near-infrared emitting water-borne silicon quantum dot micelles.

In recent years, the field of nanomaterials has exponentially expanded with versatile biological applications. However, one of the roadblocks to their clinical translation is the critical knowledge gap about how the nanomaterials interact with the biological microenvironment (nano-bio interactions). When nanomaterials are used as drug carriers or contrast agents for biological imaging, the nano-bio interaction-mediated protein conformational changes and misfolding could lead to disease-related molecular alterations and/or cell death. Here, we studied the conformation changes of human immunoglobulin G (IgG) upon interaction with silicon quantum dots functionalized with 1-decene, Pluronic-F127 (SiQD-De/F127 micelles) using UV-visible, fluorescence steady state and excited state kinetics, circular dichroism, and molecular modeling. Decene monolayer terminated SiQDs are accumulated inside the Pluronic F127 shells to form SiQD-De/F127 micelles and were shown to bind strongly with IgG. In addition, biological evaluation studies in cell lines (HeLa, Fibroblast) and medaka fish (eggs and larvae) showed enhanced uptake and minimal cytotoxicity. Our results substantiate that engineered QDs obviating the protein conformational changes could have adept bioefficacy.

3-Hydroxyflavone - bovine serum albumin complex used as fluorescent probe for the detection of pepsin

In this study, a method for the determination of pepsin using a 3-hydroxyflavone (3-HF)-bovine serum albumin (BSA) complex as a fluorescent probe was established. Under acidic conditions, 3-HF can react with BSA to emit strong green fluorescence, which involves an excited state intramolecular proton transfer and fluorescence resonance energy transfer. After pepsin is added, the fluorescence of the 3-HF-BSA system is quenched due to the hydrolysis of BSA. The degree of 3-HF-BSA fluorescence quenching has a good linear relationship with the concentration of pepsin in the range of 10–80 μg/mL. The correlation coefficient was R2 = 0.9932 and the detection limit was 2.41 μg/mL. This method has high selectivity and good stability and has been used to determine pepsin in real samples with satisfactory results.

Theoretical study of excited state intramolecular proton transfer behavior for 2-phenyl,3- hydroxybenzo[g]quinolones and its derivative in the aprotic and protic solvents

We mainly focus on exploring the excited state intramolecular proton transfer (ESIPT) and fluorescence behavior of 2-phenyl,3-hydroxybenzo[g]quinolones (2P3HBQ) and its derivative (2HP3HBQ) in aprotic and protic solvents. The time-dependent density functional theory calculation results show that 2HP3HBQ is more prone to ESIPT process than 2HP3HBQ, whether in aprotic or protic solvents. In addition, 2P3HBQ and 2HP3HBQ are more prone to ESIPT process in protic solvents, proving that intermolecular hydrogen bond interaction can promote ESIPT process. Meanwhile, the intermolecular hydrogen bond interaction will also cause the blue-shift of the emission spectrum for 2P3HBQ and 2HP3HBQ.

Rational Design of a Near-Infrared Ratiometric Probe with a Large Stokes Shift: Visualization of Polarity Abnormalities in Non-Alcoholic Fatty Liver Model Mice.

Tracking liver polarity with noninvasive and dynamic imaging techniques is helpful to better understand the non-alcoholic fatty liver (NAFL). Herein, a novel near-infrared (NIR) fluorescent probe Cy-Mp is constructed using a "symmetry collapse" strategy. The structure modification leads to the conversion of locally excited state fluorescence to charge transfer state fluorescence. Cy-Mp emits at near-infrared (NIR) wavelengths with high photostability as well as a large Stokes shift. Cy-Mp exhibits a ratiometric response to polarity, providing more accurate analysis of intracellular polarity via the built-in internal reference correction. Most importantly, the in vivo studies indicate that Cy-Mp can accumulate in the liver and the decreased polarity in the liver of mice with NAFL is verified by the ratiometric imaging, implying the great potential of Cy-Mp in the diagnosis of NAFL.

Reticulons 3 and 6 interact with viral movement proteins.

Plant reticulon (RTN) proteins are capable of constricting membranes and are vital for creating and maintaining tubules in the endoplasmic reticulum (ER), making them prime candidates for the formation of the desmotubule in plasmodesmata (PD). RTN3 and RTN6 have previously been detected in an Arabidopsis PD proteome and have been shown to be present in primary PD at cytokinesis. It has been suggested that RTN proteins form protein complexes with proteins in the PD plasma membrane and desmotubule to stabilize the desmotubule constriction and regulate PD aperture. Viral movement proteins (vMPs) enable the transport of viruses through PD and can be ER-integral membrane proteins or interact with the ER. Some vMPs can themselves constrict ER membranes or localize to RTN-containing tubules; RTN proteins and vMPs could be functionally linked or potentially interact. Here we show that different vMPs are capable of interacting with RTN3 and RTN6 in a membrane yeast two-hybrid assay, coimmunoprecipitation, and Förster resonance energy transfer measured by donor excited-state fluorescence lifetime imaging microscopy. Furthermore, coexpression of the vMP CMV-3a and RTN3 results in either the vMP or the RTN changing subcellular localization and reduces the ability of CMV-3a to open PD, further indicating interactions between the two proteins.

Locally twisted donor-π-acceptor fluorophore based on phenanthroimidazole-phenoxazine hybrid for electroluminescence

A new phenanthroimidazole-based emitter with an electron-rich phenoxazine (PIPXZ) for electroluminescence is developed. The introduction of phenoxazine to the phenanthroimidazole motif results in a locally twisted donor-π-acceptor conformation. The unique molecular structure endows the new material with an intense charge-transfer excited state and good fluorescence efficiency. The new emitter PIPXZ is systematically investigated by absorption/emission spectroscopy, thermoanalysis, density functional theory calculation, etc. PIPXZ is successfully applied in organic light-emitting device (OLED) as the emitting layer, emitting sky-blue EL with an external quantum efficiency of 1.79% at 1000 cd m−2. This study may offer a guideline for designing charge-transfer blue emitters for OLEDs

Influence of intermolecular hydrogen bond interaction on fluorescence mechanism for ESIPT characteristic o-Hydroxybenzaldehyde

The excited state intramolecular proton transfer (ESIPT) processes and fluorescence mechanisms of the o-hydroxybenzaldehyde (OHBA) and OHBA-MeOH have been investigated in cyclohexane and methanol solvents, by means of the density functional theory and time-dependent density functional theory. For OHBA, there is not enol form in the first excited state, by analysis of geometric structure and infrared vibrational spectra. The optimized potential energy curve indicates that OHBA can undergo a barrier-free ESIPT process. The molecular dynamics process demonstrates that OHBA has a 502 nm fluorescence. In OHBA-MeOH, the optimized geometric structure shows that OHBA-MeOH has enol form on the first excited state. There is a 0.252 kcal/mol energy barrier in the ESIPT process of OHBA-MeOH, by reason of intermolecular hydrogen bonded interaction. The excited state dynamic process indicates that forward and backward ESIPT reaction both can occur in OHBA-MeOH, the enol and keto forms can emit fluorescence. The calculated fluorescence wavelengths are 362 nm and 439 nm in OHBA-MeOH, respectively. These results indicate that the intermolecular hydrogen bond interaction can cause the energy barrier in the ESIPT potential energy curve, which further influence the fluorescence mechanism of OHBA. Our research work can provide the valuable theoretical reference for the design and application of fluorescent probe field.