Application Of Fluorescence Resonance Energy Transfer Research Articles

Preparation of carbon quantum dots/polyaniline nanocomposite: Towards highly sensitive detection of picric acid

Carbon quantum dots/polyaniline (CQDs/PANI) nanocomposite was successfully prepared by in-situ polymerization of aniline. CQDs were synthesized hydrothermally from gelatin with a diameter size of 4.2 nm and a 17% quantum yield. FTIR, UV–vis absorption, fluorescence spectrophotometer, XRD, TEM, XPS and lifetime decay were used to characterize the obtained nanocomposite. The formation of PANI revealed a high quenching effect on CQDs where the TEM images showed that the formed CQDs were greatly embedded in PANI matrix. In this study, CQDs/PANI nanocomposite was used for the detection of picric acid (PA) in the range 0.37–1.42 μM with a low detection limit (LOD) of 0.056 μM. The prepared sensor showed good enhancement and sensitivity towards PA in comparison to pristine CQDs and other nanostructured materials. The mechanism of PA detection has been studied where it was observed that PA is electrostatically interacted to the nanocomposite through – OH group of PA and the protonated PANI salt formed in CQDs/PANI nanocomposite by fluorescence resonance energy transfer applications. The proposed CQDs/PANI sensor was then utilized in real water samples and successfully determined the different amounts of PA spiked into tap water.

Highly-efficient quantitative fluorescence resonance energy transfer measurements based on deep learning

Intensity-based quantitative fluorescence resonance energy transfer (FRET) is a technique to measure the distance of molecules in scale of a few nanometers which is far beyond optical diffraction limit. This widely used technique needs complicated experimental process and manual image analyses to obtain precise results, which take a long time and restrict the application of quantitative FRET especially in living cells. In this paper, a simplified and automatic quantitative FRET (saqFRET) method with high efficiency is presented. In saqFRET, photoactivatable acceptor PA-mCherry and optimized excitation wavelength of donor enhanced green fluorescent protein (EGFP) are used to simplify FRET crosstalk elimination. Traditional manual image analyses are time consuming when the dataset is large. The proposed automatic image analyses based on deep learning can analyze 100 samples within 30[Formula: see text]s and demonstrate the same precision as manual image analyses.

Implementation and application of FRET–FLIM technology

With the development of the new detection methods and the function of fluorescent molecule, researchers hope to further explore the internal mechanisms of organisms, monitor changes in the intracellular microenvironment, and dynamic processes of molecular interactions in cells. Fluorescence resonance energy transfer (FRET) describes the energy transfer process between donor fluorescent molecules and acceptor fluorescent molecules. It is an important means to detect protein–protein interactions and protein conformation changes in cells. Fluorescence lifetime imaging microscopy (FLIM) enables noninvasive measurement of the fluorescence lifetime of fluorescent particles in vivo. The FRET–FLIM technology, which is use FLIM to quantify and analyze FRET, enables real-time monitoring of dynamic changes of proteins in biological cells and analysis of protein interaction mechanisms. The distance between donor and acceptor and their respective fluorescent lifetime, which are of great importance for studying the mechanism of intracellular activity can be obtained by data analysis and algorithm fitting.

Plasmon-Enhanced Fluorescence Resonance Energy Transfer.

In this review, we firstly introduce physical mechanism of fluorescence resonance energy transfer (FRET), the methods to measure FRET efficiency, and the applications of FRET. Secondly, we introduce the principle and applications of plasmon-enhanced fluorescence (PEF). Thirdly, we focused on the principle and applications of plasmon-enhanced FRET. This review can promote further understanding of FRET and PE-FRET.

Spectroscopic and theoretical investigation of conformational changes of proteins by synthesized pyrimidine derivative and its sensitivity towards FRET application

Interest in synthesizing and characterizing (IR, NMR and HRMS spectroscopic methods) a pyrimidine based Schiff-base ligand, 2-(2-(Anthracen-9-ylmethylene) hydrazinyl)-4,6-dimethyl pyrimidine (ANHP) has been developed for its application to ascertain the conformational change of protein and sensitivity towards fluorescence resonance energy transfer (FRET) process. Location of ANHP in bovine serum albumin (BSA) and human serum albumin (HSA) proteins environment has been determined using different spectroscopic techniques. Weakly fluorescent ANHP have shown greater protein induced fluorescence enhancement (PIFE) in case of HSA than BSA, though in both cases energy transfer efficiency are almost same but difference in binding constant values encourages us to find the location of ANHP within the complex protein environment. From the FRET parameter and α-helicity change, it has been found that ANHP bound with Trp-214 of HSA and surface Trp-134 of BSA. Conformational changes of proteins have been observed more for HSA than BSA in presence of ANHP, which has confirmed the location of ANHP in both the protein environments. Coupled with experimental studies, molecular docking analysis has also been done to explain the locations and distance dependent FRET process of ANHP in both proteins.

Fluorescence resonance energy transfer usage to track the sequence promoter changes in CGB5 gene in ovarian cancer patients.

The survival rates for ovarian cancer patients remain very low, often as a result of late diagnosis due to the asymptomatic course of the early stage disease. Based on the important biological contribution of human chorionic gonadotropin to various key processes including; cell cycle control, DNA repair, cellular differentiation and developmental processes, we hypothesized that genetic polymorphisms in the genes promoter could be associated with ovarian cancer risk. Thus, the purpose of the study was to determine whether particular polymorphisms occur in the promoter region of the human chorionic gonadotropin polypeptide 5 encoding gene, and if so, are they associated with ovarian cancer outcome. We analyzed Central European females diagnosed with ovarian cancer (n=95) and controls (n=76) for the occurrence of at least one of three polymorphisms (rs7260002, rs7246045, rs540432391) and their impact on cancer risk. The fluorescence resonance energy transfer technique was used in order to conduct single nucleotide polymorphisms genotyping. The occurrence of two studied polymorphisms, rs7260002 and rs540432391 present in the 5' upstream region of the chorionic gonadotropin (CG) gene were associated with an increased risk of ovarian cancer. The former polymorphism had a minor impact on cancer risk (P=0.049; OR=1.95; 95% CI=0.97-3.92), while the latter had a much larger impact and may be of great importance in the evaluation of cancer development in the analyzed population (p<0.001; OR 8.5; 95% CI 3.59-20.23). The fluorescence resonance energy transfer application used in tracking the sequence promoter variations of genes expressed during tumorigenesis may be an important factor in early prediction of ovarian cancer. Taking under consideration the elevated CG expression associated with several different cancer types it seems reasonable to estimate if the analyzed polymorphisms could affect cancer outcome.

Optical analysis of cellular oxygen sensing

Molecular imaging of the assembly of hypoxia inducible factor (HIF) complexes in living cells may lead to a deeper understanding of cellular oxygen sensing. Sophisticated live cell imaging has extended the toolbox to study the molecular response to changes in oxygen supply. In this respect fluorescence resonance energy transfer (FRET) as a technique to investigate protein-protein interaction in the nanoscale range gets increasing interest. Herein, we review FRET studies related to hypoxia research, emphasizing on recent progress, but also demonstrating how FRET studies are complementary or potentially superior to conventional biochemical as well as histochemical techniques. Technical advances in the application of FRET in living cells will overcome restrictions to end-point analysis on the population rather than single cell level and will thereby provide progress in understanding the cellular hypoxic response by HIF.

Evaluation of Genetically Encoded Chemical Tags as Orthogonal Fluorophore Labeling Tools for Single-Molecule FRET Applications.

Fluorescence resonance energy transfer (FRET) is a superb technique for measuring conformational changes of proteins on the single molecule level (smFRET) in real time. It requires introducing a donor and acceptor fluorophore pair at specific locations on the protein molecule of interest, which has often been a challenging task. By using two different self-labeling chemical tags, such as Halo-, TMP-, SNAP- and CLIP-tags, orthogonal labeling may be achieved rapidly and reliably. However, these comparatively large tags add extra distance and flexibility between the desired labeling location on the protein and the fluorophore position, which may affect the results. To systematically characterize chemical tags for smFRET measurement applications, we took the SNAP-tag/CLIP-tag combination as a model system and fused a flexible unstructured peptide, rigid polyproline peptides of various lengths, and the calcium sensor protein calmodulin between the tags. We could reliably identify length variations as small as four residues in the polyproline peptide. In the calmodulin system, the added length introduced by these tags was even beneficial for revealing subtle conformational changes upon variation of the buffer conditions. This approach opens up new possibilities for studying conformational dynamics, especially in large protein systems that are difficult to specifically conjugate with fluorophores.

Approaches to Characterize and Quantify Oligomerization of GPCRs.

Fluorescence resonance energy transfer (FRET) is an approach widely used to detect protein-protein interactions in live cells. This approach is based on the sensitization of an "acceptor" molecule by the energy transfer from a "donor" when there is an overlap between the emission spectrum of the "donor" and the excitation spectrum of the "acceptor" and close proximity between the two fluorophore species (in the region of 8 nm). Various methods exist to quantify FRET signals: here, we describe the application of homogeneous time-resolved FRET (htrFRET) combined with Tag-lite™ technology and its application to determine not only protein-protein interactions but also the capability of GPCR mutant variants to form homomers compared to the wild type GPCR within the plasma membrane of transfected cells.

Investigation of Protein-Protein Interactions and Conformational Changes in Hedgehog Signaling Pathway by FRET.

Protein-protein interactions and signal-induced protein conformational changes are fundamental molecular events that are considered as essential in modern life sciences. Among various techniques developed to study such phenomena, fluorescence resonance energy transfer (FRET) is a widely used method with many advantages in detecting these molecular events. Here, we describe the application of FRET in the mechanistic investigation of cell signal transduction, taking the example of the Hh signaling pathway, which plays a critical role in embryonic development and tissue homeostasis. A number of general guidelines as well as some key notes have been summarized as a protocol for reader's reference.

FRET from core and core–shell quantum dots to laser dye: A comparative investigation

A remarkable progress has been made in the recent past in fluorescence resonance energy transfer (FRET) studies using semiconductor quantum dots (QDs) and application of QD-based FRET to probe specific biological processes. Here we report a systematic study of FRET from CdSe (core) and CdSe/ZnS (core–shell) quantum dots (donor) to sulforhodamine B (SRB) dye (acceptor) using steadystate and time resolved fluorescence spectroscopy. The results obtained demonstrate occurrence of efficient energy transfer from QDs to dye and are discussed in the light of the Förster theory. Time resolved decay curves of QDs obtained in the presence and absence of sulforhodamine B dye are analyzed. The values of spectral overlap, Förster distance and transfer efficiency have been determined using steady-state and time-resolved fluorescence spectroscopic data. It is observed that the transfer efficiency does not follow a linear dependence on spectral overlap integral and quantum yield of donor as predicted by the Förster theory for molecules. This nonlinear dependence of transfer efficiency on overlap integral as well as quantum yield of donor; and the possibility of surface states and defect states of QDs causing this are discussed.

FRET Imaging by Laser Scanning Cytometry on Large Populations of Adherent Cells.

The application of FRET (fluorescence resonance energy transfer) sensors for monitoring protein-protein interactions under vital conditions is attracting increasing attention in molecular and cell biology. Laser-scanning cytometry (LSC), a slide-based sister procedure to flow cytometry, provides an opportunity to analyze large populations of adherent cells or 2-D solid tissues in their undisturbed physiological settings. Here we provide an LSC-based three-laser protocol for high-throughput ratiometric FRET measurements utilizing cyan and yellow fluorescent proteins as a FRET pair. Membrane labeling with Cy5 dye is used for cell identification and contouring. Pixel-by-pixel and single-cell FRET efficiencies are calculated to estimate the extent of the molecular interactions and their distribution in the cell populations examined. We also present a non-high-throughput donor photobleaching FRET application, for obtaining the required instrument parameters for ratiometric FRET. In the biological model presented, HeLa cells are transfected with the ECFP- or EYFP-tagged Fos and Jun nuclear proteins, which heterodimerize to form active AP1 transcription factor.

Chromophore Photoreduction in Red Fluorescent Proteins Is Responsible for Bleaching and Phototoxicity

Red fluorescent proteins (RFPs) are indispensable tools for deep-tissue imaging, fluorescence resonance energy transfer applications, and super-resolution microscopy. Using time-resolved optical spectroscopy this study investigated photoinduced dynamics of three RFPs, KillerRed, mRFP, and DsRed. In all three RFPs, a new transient absorption intermediate was observed, which decays on a microsecond–millisecond time scale. This intermediate is characterized by red-shifted absorption at 1.68–1.72 eV (λmax = 720–740 nm). On the basis of electronic structure calculations, experimental evidence, and published literature, the chemical nature of the intermediate is assigned to an unusual open-shell dianionic chromophore (dianion-radical) formed via photoreduction. A doubly charged state that is not stable in the isolated (gas phase) chromophore is stabilized by the electrostatic field of the protein. Mechanistic implications for photobleaching, blinking, and phototoxicity are discussed.

Application of fluorescence resonance energy transfer in protein studies

Since the physical process of fluorescence resonance energy transfer (FRET) was elucidated more than six decades ago, this peculiar fluorescence phenomenon has turned into a powerful tool for biomedical research due to its compatibility in scale with biological molecules as well as rapid developments in novel fluorophores and optical detection techniques. A wide variety of FRET approaches have been devised, each with its own advantages and drawbacks. Especially in the last decade or so, we are witnessing a flourish of FRET applications in biological investigations, many of which exemplify clever experimental design and rigorous analysis. Here we review the current stage of FRET methods development with the main focus on its applications in protein studies in biological systems, by summarizing the basic components of FRET techniques, most established quantification methods, as well as potential pitfalls, illustrated by example applications.

Reversible Conformational Switching of i‐Motif DNA Studied by Fluorescence Spectroscopy

Non-B DNAs, which can form unique structures other than double helix of B-DNA, have attracted considerable attention from scientists in various fields including biology, chemistry and physics etc. Among them, i-motif DNA, which is formed from cytosine (C)-rich sequences found in telomeric DNA and the promoter region of oncogenes, has been extensively investigated as a signpost and controller for the oncogene expression at the transcription level and as a promising material in nanotechnology. Fluorescence techniques such as fluorescence resonance energy transfer (FRET) and the fluorescence quenching are important for studying DNA and in particular for the visualization of reversible conformational switching of i-motif DNA that is triggered by the protonation. Here, we review the latest studies on the conformational dynamics of i-motif DNA as well as the application of FRET and fluorescence quenching techniques to the visualization of reversible conformational switching of i-motif DNA in nano-biotechnology.

Fluorescence resonance energy transfer (FRET)-based biosensors: visualizing cellular dynamics and bioenergetics

Förster (or fluorescence) resonance energy transfer (FRET) is a process involving the radiation-less transfer of energy from a "donor" fluorophore to an "acceptor" fluorophore. FRET technology enables the quantitative analysis of molecular dynamics in biophysics and in molecular biology, such as the monitoring of protein-protein interactions, protein-DNA interactions, and protein conformational changes. FRET-based biosensors have been utilized to monitor cellular dynamics not only in heterogeneous cellular populations, but also at the single-cell level in real time. Lately, applications of FRET-based biosensors range from basic biological to biomedical disciplines. Despite the diverse applications of FRET, FRET-based sensors still face many challenges. There is an increasing need for higher fluorescence resolution and improved specificity of FRET biosensors. Additionally, as more FRET-based technologies extend to medical diagnostics, the affordability of FRET reagents becomes a significant concern. Here, we will review current advances and limitations of FRET-based biosensor technology and discuss future FRET applications.

Förster resonance energy transfer photoacoustic microscopy

Förster, or fluorescence, resonance energy transfer (FRET) provides fluorescence signals sensitive to intra- and inter-molecular distances in the 1 to 10 nm range. Widely applied in the fluorescence imaging environment, FRET enables visualization of physicochemical processes in molecular interactions and conformations. In this paper, we report photoacoustic imaging of FRET, based on nonradiative decay that produces heat and subsequent acoustic waves. Estimates of the energy transfer efficiency by photoacoustic microscopy were compared to those obtained by fluorescence confocal microscopy. The experimental results in tissue phantoms show that photoacoustic microscopy is capable of FRET imaging with an enhanced penetration depth. Through its ability to three-dimensionally image tissue with scalable resolution, photoacoustic microscopy could be a beneficial biomedical tool to broaden the in vivo application of FRET.

Pulse-shaping multiphoton FRET microscopy.

Fluorescence Resonance Energy Transfer (FRET) microscopy is a commonly-used technique to study problems in biophysics that range from uncovering cellular signaling pathways to detecting conformational changes in single biomolecules. Unfortunately, excitation and emission spectral overlap between the fluorophores create challenges in quantitative FRET studies. It has been shown previously that quantitative FRET stoichiometry can be performed by selective excitation of donor and acceptor fluorophores. Extending this approach to two-photon FRET applications is difficult when conventional femtosecond laser sources are used due to their limited bandwidth and slow tuning response time. Extremely broadband titanium:sapphire lasers enable the simultaneous excitation of both donor and acceptor for two-photon FRET, but do so without selectivity. Here we present a novel two-photon FRET microscopy technique that employs pulse-shaping to perform selective excitation of fluorophores in live cells and detect FRET between them. Pulse-shaping via multiphoton intrapulse interference can tailor the excitation pulses to achieve selective excitation. This technique overcomes the limitation of conventional femtosecond lasers to allow rapid switching between selective excitation of the donor and acceptor fluorophores. We apply the method to live cells expressing the fluorescent proteins mCerulean and mCherry, demonstrating selective excitation of fluorophores via pulse-shaping and the detection of two-photon FRET. This work paves the way for two-photon FRET stoichiometry.

Bidirectional Fluorescence Resonance Energy Transfer (FRET) in Mutated and Chemically Modified Yellow Fluorescent Protein (YFP)

Fluorescence resonance energy transfer (FRET) using fluorescent protein variants are used for studying the associations and biomolecular motions of macromolecules inside the cell. Intramolecular FRET utilizing fluorescent chemical labels has been applied in nucleic acid chemistry for detection of specific sequence. However, the biotechnological applications of intramolecular FRET in fluorescent proteins have not been exploited. This study demonstrates the intramolecular FRET between fluorescent protein and conjugated chemical label whereby FRET occurs from inside to outside and vice versa for fluorescent protein. The fluorescent protein is modified for the attachment of chemical fluorophores and the novel FRET pairs created by conjugation are MDCC (435/475)-Citrine (516/529) and Citrine-Alexa fluor (568/603). These protein-label pairs exhibited strong intramolecular FRET and the energy transfer efficiency was determined based on the time evolution of the ratio of emission intensities of labeled and unlabeled proteins. The efficiency was found to be 0.79 and 0.89 for MDCC-Citrine and 0.24 and 0.65 for Citrine-Alexa Fluor pairs when the label is conjugated at different sites in the protein. Förster distance and the average distance between the fluorophores were also determined. The bidirectional approach described here can provide new insights into designing FRET-based sensors.

Computer simulation to investigate the FRET application in DNA hybridization systems

Molecular dynamics (MD) and quantum mechanics (QM) were used to investigate fluorescence resonance energy transfer (FRET) between coumarin and ethidium in two Mergny's DNA hybridization systems. By combining the transition dipoles calculated by the quantum semi-empirical method and the conformations of the FRET probes collected by MD, FRET efficiencies were derived from the Förster equation at five temperatures from 273 K to 313 K. The plotted efficiencies were compared with Mergny's experiments, and showed good agreement. The simulated orientation factor and isotropically averaged orientation factor were compared, and the results demonstrated that the assumption of isotropic orientations is invalid when FRET probes are close to each other. The first order kinetic assumptions were also used to calculate the transfer efficiencies, and the results show that this D-A FRET process approximates the first order kinetic reactions.