Temperature Fluctuations Research Articles

PERSPECTIVE: Semen additives for improving frozen-thawed buffalo and cattle semen ‐ a review

This comprehensive review delves into the evolving landscape of assisted reproductive technologies (ARTs) in bovine species, particularly focusing on the pivotal roles of semen additives in the cryopreservation of buffalo and cattle semen. In developing nations, where ARTs are still emerging, these techniques significantly influence bovine reproductive strategies. In contrast, developed regions have embraced them as primary approaches for dairy buffalo and cattle breeding. Semen cryopreservation, while offering advantages like extended storage and genetic propagation, also presents challenges. These include diminished sperm quality due to reactive oxygen species (ROS) production, alterations in sperm structure, and temperature fluctuations. Further, the effect of cryopreservation differs between cattle and buffaloes, with the latter exhibiting poorer semen viability and fertility due to inherent lipid composition susceptibilities. The generation and implications of ROS, especially hydrogen peroxide, contribute significantly to sperm DNA damage and functional impairments. To counteract these challenges, research has intensified on semen additives, aiming to bolster semen quality and protect against oxidative stress-induced damage. As the field advances, the review emphasizes the need for optimized cryopreservation techniques and tailored antioxidant strategies to harness the full potential of ARTs in bovine breeding programs.

How Much Does Land–Atmosphere Coupling Influence Summertime Temperature Variability in the Western United States?

Abstract Interannual fluctuations in average summertime temperatures across the western United States are captured by a leading empirical orthogonal function that explains over 50% of the total observed variance. In this paper, we explain the origins of this pattern of interannual temperature variability by examining soil moisture–temperature coupling that acts across seasons in observations and climate models. We find that a characteristic pattern of coupled temperature–soil moisture climate variability accounts for 34% of the total observed variance in summertime temperature across the region. This pattern is reproduced in state-of-the-art global climate models, where experiments that eliminate soil moisture variability reduce summertime average temperature variance by a factor of 3 on average. We use an idealized model of the coupled atmospheric boundary layer and underlying land surface to demonstrate that feedbacks between soil moisture, boundary layer relative humidity, and precipitation can explain the observed relations between springtime soil moisture and summertime temperature. Our results suggest that antecedent soil moisture conditions and subsequent land–atmosphere interactions play an important role in interannual summertime temperature variability in the western United States; soil moisture variations cause distal temperature anomalies and impart predictability at time scales longer than one season. Our results indicate that 40% of the observed warming trend across the western United States since 1981 has been driven by wintertime precipitation trends in the U.S. southwest. Significance Statement Year-to-year fluctuations in summertime temperatures have a large impact on drought, wildfire, and extreme heat across the Western United States. We find strong evidence that soil moisture deficits in the preceding spring may be the primary driver of higher-than-average summer temperatures in this region. Our results suggest that memory in the water cycle may lead to greater predictability in the climate system from season to season and that trends in southwest precipitation have exerted a considerable influence on observed warming over the past 40 years.

Strong acclimation effect of temperature and humidity on heat tolerance of the Arctic collembolan Megaphorura arctica.

The Arctic is a highly variable environment in which extreme daily and seasonal temperature fluctuations can occur. With climate change, an increase in the occurrence of extreme high temperatures and drought events is expected. While the effects of cold and dehydration stress on polar arthropods are well studied in combination, little is known about how these species respond to the combined effects of heat and dehydration stress. In this paper, we investigated how the heat tolerance of the Arctic collembola Megaphorura arctica is affected by combinations of different temperature and humidity acclimation regimes under controlled laboratory conditions. The effect of acclimation temperature was complex and highly dependent on both acclimation time and temperature, and was found to have a positive, negative or no effect depending on experimental conditions. Further, we found marked effects of the interaction between temperature and humidity on heat tolerance, with lower humidity severely decreasing heat tolerance when the acclimation temperature was increased. This effect was more pronounced with increasing acclimation time. Lastly, the effect of acclimation on heat tolerance under a fluctuating temperature regime was dependent on acclimation temperature and time, as well as humidity levels. Together, these results show that thermal acclimation alone has moderate or no effect on heat tolerance, but that drought events, likely to be more frequent in the future, in combination with high temperature stress can have large negative impacts on heat tolerance of some Arctic arthropods.

Nitrogen and sulfur for phosphorus: Lipidome adaptation of anaerobic sulfate-reducing bacteria in phosphorus-deprived conditions

Understanding how microbial lipidomes adapt to environmental and nutrient stress is crucial for comprehending microbial survival and functionality. Certain anaerobic bacteria can synthesize glycerolipids with ether/ester bonds, yet the complexities of their lipidome remodeling under varying physicochemical and nutritional conditions remain largely unexplored. In this study, we thoroughly examined the lipidome adaptations of Desulfatibacillum alkenivorans strain PF2803T, a mesophilic anaerobic sulfate-reducing bacterium known for its high proportions of alkylglycerol ether lipids in its membrane, under various cultivation conditions including temperature, pH, salinity, and ammonium and phosphorous concentrations. Employing an extensive analytical and computational lipidomic methodology, we identified an assemblage of nearly 400 distinct lipids, including a range of glycerol ether/ester lipids with various polar head groups. Information theory-based analysis revealed that temperature fluctuations and phosphate scarcity profoundly influenced the lipidome's composition, leading to an enhanced diversity and specificity of novel lipids. Notably, phosphorous limitation led to the biosynthesis of novel glucuronosylglycerols and sulfur-containing aminolipids, termed butyramide cysteine glycerols, featuring various ether/ester bonds. This suggests a novel adaptive strategy for anaerobic heterotrophs to thrive under phosphorus-depleted conditions, characterized by a diverse array of nitrogen- and sulfur-containing polar head groups, moving beyond a reliance on conventional nonphospholipid types.

Ih Block Reveals Separation of Timescales in Pyloric Rhythm Response to Temperature Changes in Cancer borealis.

Motor systems operate over a range of frequencies and relative timing (phase). We studied the contribution of the hyperpolarization-activated inward current (Ih) to frequency and phase in the pyloric rhythm of the stomatogastric ganglion (STG) of the crab, Cancer borealis as temperature was altered from 11°C to 21°C. Under control conditions, the frequency of the rhythm increased monotonically with temperature, while the phases of the pyloric dilator (PD), lateral pyloric (LP), and pyloric (PY) neurons remained constant. When we blocked Ih with cesium (Cs+) PD offset, LP onset, and LP offset were all phase advanced in Cs+ at 11°C, and the latter two further advanced as temperature increased. In Cs+ the steady state increase in pyloric frequency with temperature diminished and the Q10 of the pyloric frequency dropped from ~1.75 to ~1.35. Unexpectedly in Cs+, the frequency displayed non-monotonic dynamics during temperature transitions; the frequency initially dropped as temperature increased, then rose once temperature stabilized, creating a characteristic "jag". Interestingly, these jags were still present during temperature transitions in Cs+ when the pacemaker was isolated by picrotoxin, although the temperature-induced change in frequency recovered to control levels. Overall, these data suggest that Ih plays an important role in the ability of this circuit to produce smooth transitory responses and persistent frequency increases by different mechanisms during temperature fluctuations.

Caught in the Act: Incipient Speciation at the Southern limit of Viburnum in the Central Andes.

A fundamental objective of evolutionary biology is to understand the origin of independently evolving species. Phylogenetic studies of species radiations rarely are able to document ongoing speciation; instead, modes of speciation, entailing geographic separation and/or ecological differentiation, are posited retrospectively. The Oreinotinus clade of Viburnum has radiated recently from north to south through the cloud forests of Mexico and Central America to the Central Andes. Our analyses support a hypothesis of incipient speciation in Oreinotinus at the southern edge of its geographic range, from central Peru to northern Argentina. Although several species and infraspecific taxa of have been recognized in this area, multiple lines of evidence and analytical approaches (including analyses of phylogenetic relationships, genetic structure, leaf morphology, and climatic envelopes) favor the recognition of just a single species, V. seemenii. We show that what has previously been recognized as V. seemenii f. minor has recently occupied the drier Tucuman-Bolivian forest region from Samaipata in Bolivia to Salta in northern Argentina. Plants in these populations form a well-supported clade with a distinctive genetic signature and they have evolved smaller, narrower leaves. We interpret this as the beginning of a within-species divergence process that has elsewhere in the neotropics resulted repeatedly in Viburnum species with a particular set of leaf ecomorphs. Specifically, the southern populations are in the process of evolving the small, glabrous, and entire leaf ecomorph that has evolved in four other montane areas of endemism. As predicted based on our studies of leaf ecomorphs in Chiapas, Mexico, these southern populations experience generally drier conditions, with large diurnal temperature fluctuations. In a central portion of the range of V. seemenii, characterized by wetter climatic conditions, we also document what may be the initial differentiation of the leaf ecomorph with larger, pubescent, and toothy leaves. The emergence of these ecomorphs thus appears to be driven by adaptation to subtly different climatic conditions in separate geographic regions, as opposed to parapatric differentiation along elevational gradients as suggested by Viburnum species distributions in other parts of the neotropics.

Linking Occupant Behavior and Window Design through Post-Occupancy Evaluation: Enhancing Natural Ventilation and Indoor Air Quality

This study investigates how window design features, such as size, placement, and orientation, might impact occupants’ behavior related to natural ventilation in residential houses and how residents manage natural ventilation to affect indoor air quality (IAQ), comfort, and energy efficiency. By analyzing responses from a questionnaire distributed among 200 occupants, this article reveals that stuffy air, perceived outdoor pollutants, odors, and relative humidity, along with factors like inadequate ventilation, temperature fluctuations, and energy consumption concerns, emerge as primary issues affecting occupants’ comfort and well-being. This study proposes design recommendations for enhancing IAQ, including optimal window placement for cross-ventilation, window-to-wall ratio (WWR) considerations, and the integration of smart window technologies. This research recognizes that window design is not just a technical matter but involves understanding social and behavioral factors as well. By analyzing occupant responses, it aims to provide insights into the socio-technical parameters that should be considered in window design. The findings offer valuable strategies for architects, designers, and homeowners to optimize natural ventilation and underscore the importance of an occupant-centered approach in sustainable building design.

Hypersonic turbulent boundary layer over the windward side of a lifting body

In the present study, we performed direct numerical simulations for a hypersonic turbulent boundary layer over the windward side of a lifting body, the HyTRV model, at Mach number $6$ and attack angle 2 $^{\circ }$ to investigate the global and local turbulent features, and evaluate its difference from canonical turbulent boundary layers. By scrutinizing the instantaneous and averaged flow fields, we found that the transverse curvature on the windward side of the HyTRV model induces the transverse opposing pressure gradients that push the flow on both sides towards the windward symmetry plane, yielding significant effects of the azimuthal inhomogeneity and large-scale cross-stream circulations, moderate and azimuthal independent influences of adverse pressure gradient, and negligible impact of the mean flow three-dimensionality. Further inspecting the local turbulent statistics, we identified that the mean and fluctuating velocity become increasingly similar to the highly decelerated turbulent boundary layers over flat plates in that the mean velocity deficit is enhanced, and the outer layer Reynolds stresses are amplified as it approaches the windward symmetry plane, and prove to be self-similar under the scaling of Wei & Knopp (J. Fluid Mech., vol. 958, 2023, A9) for adverse-pressure-gradient turbulent boundary layers. Conditionally averaged Reynolds stresses based on strong sweeping and ejection events demonstrated that the Kelvin–Helmholtz instability of the strong embedded shear layer induced by the large-scale cross-stream circulations is responsible for the turbulence amplification in the outer layer. The strong Reynolds analogy that relates the mean velocity and temperature was refined to incorporate the non-canonical effects, showing considerable improvements in the accuracy of such a formula. On the other hand, the temperature fluctuations are still transported passively, as indicated by their resemblance to the velocity. The conclusions obtained in the present study provide potentially profitable information for turbulent modelling modification for the accurate predictions of skin friction and wall heat transfer.

Future climate projection across Tanzania under CMIP6 with high-resolution regional climate model

Climate change is one of the most pressing challenges faced by developing countries due to their lower adaptive capacity, with far-reaching impacts on agriculture. The mid-century period is widely regarded as a critical moment, during which adaptation is deemed essential to mitigating the associated impacts. This study presents future climate projections across Tanzania using the latest generation of global climate models (CMIP6) combined with a high-resolution regional climate model. The findings indicate that, the trends in temperature and precipitation in Tanzania from 1991 to 2020, minimum temperatures showed the highest variability with a trend of 0.3 °C, indicating significant fluctuations in minimum temperature over the decades. Maximum temperatures also showed high variability with a trend of 0.4 °C. There is a range of variability in precipitation per decade for different regions in Tanzania, with some regions experiencing significant decreases in precipitation of up to − 90.3 mm and − 127.6 mm. However, there were also regions that experienced increases in precipitation, although these increases were generally less than 4.8 mm over the decades. The projections of minimum and maximum temperatures from 2040 to 2071 under the Shared Socioeconomic Pathways (SSP) 2–4.5 and SSP 5–8.5 are projected to increase by 0.14 °C to 0.21 °C per decade, across different regions. The average projected precipitation changes per decade vary across regions. Some regions are projected to experience increases in precipitation. Other regions are projected to show decreases in precipitation within the range of − 0.6 mm to 15.5 mm and − 1.5 mm to 47.4 mm under SSP2–4.5 and SSP5–8.5 respectively. Overall, both scenarios show an increase in projected temperatures and precipitation for most regions in Tanzania, with some areas experiencing more significant increases compared to others. The changes in temperatures and precipitation are expected to have significant impacts on agriculture and water resources in Tanzania.

Flow rate influence on sediment depth estimation in sewers using temperature sensors.

Enhancing sediment accumulation monitoring techniques in sewers will enable a better understanding of the build-up processes to develop improved cleaning strategies. Thermal sensors provide a solution to sediment depth estimation by passively monitoring temperature fluctuations in the wastewater and sediment beds, which allows evaluation of the heat-transfer processes in sewer pipes. This study analyses the influence of the flow conditions on heat-transfer processes at the water-sediment interface during dry weather flow conditions. For this purpose, an experimental campaign was performed by establishing different flow, temperature patterns, and sediment depth conditions in an annular flume, which ensured steady flow and room-temperature conditions. Numerical simulations were also performed to assess the impact of flow conditions on the relationships between sediment depth and harmonic parameters derived from wastewater and sediment-bed temperature patterns. Results show that heat transfer between water and sediment occurred instantaneously for velocities greater than 0.1 m/s, and that sediment depth estimations using temperature-based systems were barely sensitive to velocities between 0.1 and 0.4 m/s. A depth estimation accuracy of ±7 mm was achieved. This confirms the ability of using temperature sensors to monitor sediment build-up in sewers under dry weather conditions, without the need for flow monitoring.

Study on Real‐Time Temperature of a 35 kW Vanadium Stack and Its Influences on the Performance of a Vanadium Redox Flow Battery

AbstractThe temperature is a very important parameter for an operating vanadium redox flow battery (VRFB). During charging and discharging, the temperature of VRFB is constantly changing. In this paper, a self‐made 35 kW vanadium stack was charged & discharged at the current density of 100 and 120 mA cm−2 to investigate the change trend of real‐time operating temperature. The results show that the temperature decreases during charging and increases during discharging. And the average temperature of each cycle increases with continuous charge‐discharge cycles. The influences of real‐time temperature on performance of columbic efficiency (CE), voltage efficient (VE), over‐potential, capacity, energy, state of charge (SOC), and pressure loss were further investigated. The results show that the temperature fluctuation largely affects the electrochemical properties of VRFB. With the real‐time average temperature increased from 16.02 °C to 29.91 °C, the VE, capacity, energy and the SOC range of the battery increased, while the CE, the over‐potential and the average pressure loss decreased. This work not only gives data support to temperature management of VFB, but also provides direction to the engineering application of all flow batteries.

Strategic control of combustion-induced ammonia emissions: A key initiative for substantial PM2.5 reduction in Tianjin, North China Plain

Information on the temporal and spatial variations in the sources of ammonium salts (NH4+), a crucial alkaline component in PM2.5, is limited. Here, we simultaneously collected PM2.5 and gaseous ammonia (NH3) samples in both summer and winter from two sites in Tianjin: an urban site (Tianjin University, TJU) and a suburban site (Binhai New-region, BH). NH3 concentrations, the contents of major water-soluble inorganic ions in PM2.5, and the compositions of ammonium‑nitrogen isotopes (δ15N-NH4+) were measured. As a result, (NH4)2SO4 and NH4NO3 were the predominant forms of NH4+ in PM2.5 during summer and winter, respectively. However, the NH4NO3 concentrations were notably greater at TJU (6.2 ± 7.3 μg m−3) than at BH (3.8 ± 4.7 μg m−3) in summer, with no regional differences observed in winter. Both sites displayed almost half the contribution of c-NH3 (combustion-related NH3) to NH4+, differing from the finding of previous isotope-based studies. This discrepancy could be attributed to the combined effects of NHx isotope fractionation and seasonal δ15N value variations in NH3 sources. The contribution fractions of v-NH3 (volatile NH3) and c-NH3 exhibited similar patterns at both sites seasonally, probably caused by coal combustion for heating in winter and temperature fluctuations. However, the contribution fraction of c-NH3 was lower at BH than at TJU in summer but greater in winter than at TJU. In summer, NH4NO3 was unstable and limited its delivery to TJU from BH, and the high contribution of c-NH3 to NH4+ at TJU could be attributed to local vehicle emissions. In winter, the stable particulate NH4NO3 that formed from the c-NH3 in the upwind area could be transported to the downwind area, increasing the NH4+ concentration at BH. Our study provides valuable insights for devising emission mitigation strategies to alleviate the increasing burden of NH3 in the local atmosphere.

Development of Tetramycin-Loaded Core–Shell Beads with Hot-/Wet-Responsive Release Properties for Control of Bacterial Wilt Disease

Plant bacterial wilt is caused by Ralstonia solanacearum, a soilborne pathogen that infects plant conduits, leading to wilt disease. It is extremely difficult to cure plants infected with Ralstonia solanacearum; however, bactericide-loaded beads with hot-/wet-responsive properties may be able to release a biocide in line with the increase in the hot-/wet-associated activity of Ralstonia solanacearum, effectively killing the pathogenic cells and providing high levels of plant protection. A biopesticide, Tetramycin, was embedded in corn kernel powder (CKP)-based cores. An oil-phase mixture was sprayed onto the core surface to form a hot-/wet-responsive intermediate shell (IMS). Subsequently, a layer of ethyl cellulose (EC) and hydroxypropyl methyl cellulose (HPMC) was coated onto the IMS to create a single wet-responsive outer shell (OTS). The ratios of the components in the cores, including the corn kernel powder (CKP), xanthan gum (XG), and Tetramycin, were optimized, as well as those of the IMS, including pentaerythrityl tetrastearate (PETS), pentaerythrityl tetraoleate (PETO), polyethylene glycol stearate (PEG400MS), and polyethylene glycol monooleate (PEG400MO), and those of the outer shell (OTS), including ethyl cellulose (EC) and hydroxypropyl methyl cellulose (HPMC). A texture performance analysis, differential scanning calorimetry (DSC) analysis, thermogravimetric analysis (TGA), temperature and humidity response performance tests, scanning electron microscope (SEM) observations, and a field effectiveness test were conducted to characterize the Tetramycin-loaded beads. The results indicated that the optimal formula for the bead cores comprised a mass ratio of CKP/Tetramycin solution/XG = 13.5:23:2. The preferred mass ratio for IMS was PETS/PETO/PEG400MO = 10:30:10, and the formula for the applicable OTS consisted of a mass ratio of EC/HPMC = 5:1. In soil with a temperature of 30–35 °C and humidity of 30%, the release period of the Tetramycin-loaded beads, with a cumulative release rate of over 95%, could last up to 35 days. Furthermore, the Tetramycin-loaded beads exhibited a gradual and multi-cyclic release process under alternating hot/wet and dry/cold environments. The relative preventive efficacy of 54.74% on tobacco was revealed at a field-testing scale. A significant reduction in the abundance of Ralstonia solanacearum was also observed under treatment with the Tetramycin-loaded beads. The early fungal community structure exhibited higher consistency compared to the control. However, in the later stage, the diversity differences between the soil layers were restored. In conclusion, Tetramycin-loaded beads that could effectively respond to temperature and humidity fluctuations were developed, resulting in enhanced disease prevention efficacy and offering broad prospects for the prevention and control of Ralstonia solanacearum in agricultural settings.

Storage Stability of jaggery based sesame spread: A comprehensive study

The shelf life of a spread product is a critical factor in its formulation, production, and marketing. Consumers expect sesame spread products retain a fresh appearance, odor, and flavor for an extended period, as a longer shelf life decreases costs for both producers and consumers. Therefore, the objective of this investigation was to evaluate the storability of jiggery based sesame spread (JSS). The storability of developed JSS were of analyzed for physicochemical characteristics (Moisture, Protein, Carbohydrate, Fat, Crude fibre, Ash, Calorific value, Oil separations, Oxalic acid, Peroxide value and Acid value), Rheological parameters (Adhesiveness, Cohesiveness, Hardness and Viscosity), sensory attributes (Taste, Colour, Appearance, Spreadability, Flavour and Overall Acceptability) and microbiological quality (Standard plate count, Yeast and Mould count and Escherichia coli.) of JSS. The investigational storages were carried out for 90 days at room temperature storage (24 ± 4°C, 40-50% RH) and refrigerated (8°C, 17-20% RH) storage. The results indicated significant increase in oil separations, peroxide value, acid value, microbial counts, and sensory parameters of the spread. However, the remaining analyzed quality attributes of the spread demonstrated stability. The oil separations in spread sample were found to be highest during room temperature storage, which could be attributed to the temperature fluctuations experienced during storage. In conclusion, it is highly recommended to carefully manage the storage temperature of sesame spread to ensure its stability.

Finding origins of CMB anomalies in the inflationary quantum fluctuations

In this paper, we present compelling evidence for the parity asymmetry (a discrete symmetry separate from isotropy) in the Cosmic Microwave Background (CMB) map, measured through two-point temperature correlations. Any asymmetry associated with discrete symmetries, such as parity, challenges our understanding of quantum physics associated with primordial physics rather than LCDM (Λ Cold-Dark-Matter) itself. We commence by conducting a comprehensive analysis of the Planck CMB, focusing on the distribution of power in low-multipoles and temperature anticorrelations at parity conjugate points in position space. We find tension with the near scale-invariant power-law power spectrum of Standard Inflation (SI), with p-values of the order 𝒪(10-4 - 10-3). Alternatively, we explore the framework of direct-sum inflation (DSI), where a quantum fluctuation arises as a direct sum of two components evolving forward and backward in time at parity conjugate points in physical space. This mechanism results in a parity-asymmetric scale-dependent power spectrum, particularly prominent at low-multipoles, without any additional free model parameters. Our findings indicate that DSI is consistent with data on parity asymmetry, the absence of power at θ > 60°, and power suppression at low-even-multipoles which are major data anomalies in the SI model. Furthermore, we discover that the parameters characterizing the hemispherical power asymmetry anomaly become statistically insignificant when the large SI quadrupole amplitude is reduced to align with the data. DSI explains this low quadrupole with a p-value of 3.5%, 39 times higher than SI. Combining statistics from parameters measuring parity and low-ℓ angular power spectrum, we find that DSI is 50-650 times more probable than SI. In summary, our investigation suggests that while CMB temperature fluctuations exhibit homogeneity and isotropy, they also display parity-asymmetric behavior consistent with predictions of DSI. This observation provides a tantalizing evidence for the quantum mechanical nature of gravity.

Yellow hypergiant V509 Cas: Stable in the ‘yellow void’

Context. The yellow hypergiant star V509 Cas is currently undergoing an extreme phase of evolution. Having experienced eruptive mass-loss outbursts in the 20th century, the star’s effective temperature reached record high values in the early 2000s. However, since then, the star’s behaviour has displayed an unprecedented level of stability. In spite of that, the star could be traversing through the ‘yellow void’ instability region. Aims. To describe the current evolutionary state of V509 Cas, we analysed its variability using photometric and spectroscopic data collected over recent years. By comparing our findings with historical records, we aim to determine whether the star’s surface shows signs of stabilisation. Additionally, we investigate the variability of emission components in the wings of certain spectral lines to highlight the contribution of the circumstellar gaseous disc to this phenomenon. Methods. Our spectroscopic monitoring observations were carried out at Tartu Observatory over the course of seven years, supplemented by echelle spectra obtained at the Nordic Optical Telescope, as well as publicly available photometric data from Gaia, AAVSO, and AAVSO’s Bright Star Monitor programme. We estimated the variability of effective temperature and radial velocity from the spectral time series and correlated it with the brightness variability of V509 Cas. Results. The results indicate that the star’s average brightness level has remained stable throughout the observed period, with an amplitude of variability ∼0.1 mag. While the amplitude of short-term temperature fluctuations has decreased compared to the early 2000s, the variability of the radial velocity remains similar to historical values from the early 20th century. Moreover, we show how the variable radial velocity affects the emission components in some absorption lines (e.g. Sc II) and how that follows the hypothesis of a disc surrounding the star.

Linearity and intermodulation distortion analysis of single and dual metal gate junctionless transistor

Linearity and intermodulation distortion are very crucial parameters for RFICs design. Therefore, in this work, a detailed comparative analysis on linearity and intermodulation distortion of single metal (SMG) and double metal (DMG) double gate junction less transistor (JLT) is done using TCAD silvaco suite. Furthermore, the effects of temperature fluctuation, gate length variation, and gate material engineering on the linearity performance of both devices are also studied. A few significant figures of merit, including Voltage Intercept Point 2 (VIP2), Voltage Intercept Point 3 (VIP3), Third Order Intercept Power (IIP3), 1 dB Compression Point (P1dB), Third Order Intermodulation Distortion (IMD3), and the transconductance derivative parameters First Order Transconductance (gm1), Second Order Transconductance (gm2), and Third Order Transconductance (gm3) are used to assess the device linearity and intermodulation distortion of SMG and DMG JLT's. The findings show that higher VIP2, VIP3, IIP3, 1-dB compression point and lower gm3, IMD3 values are obtained for the SMG JLT device when compared to its counterpart DMG JLT. SMG JLT, which assures strong linearity and low distortion.

Advancements in Dental Casting Materials & Their Forensic Significance

Abstract: This research explores various dental casting materials & their significance in forensic science. Traditional materials, such as- Dental stone, Plaster of Paris, & Dental wax have long been utilized in forensic investigations. However, advancements in materials science have led to the development of newer, more versatile options, such as- Epoxy resins, Polyurethane, & Alginate substitutes. Each material offers distinct advantages & limitations concerning ease of use, accuracy, & durability. Dental stone, a widely used & employed material, provides excellent detail reproduction & stability but lacks flexibility. Plaster of Paris, though economical, may not yield precise replicas due to its brittle nature. Dental wax, appreciated for its malleability & is susceptible to form deformation & degradation over time. In contrast, modern alternatives like- Epoxy resins & Polyurethane boast superior strength & dimensional stability, making them ideal for long-term storage of dental impressions. Epoxy resins, in particular, offer high fidelity reproduction of dental structures & resistance to moisture, temperature fluctuations. Polyurethane, known for its flexibility & durability, enables the creation of resilient dental models suitable for extensive forensic analysis. Furthermore, Alginate substitutes have gained popularity for their ease of use & compatibility with 3D Printing technology. These materials also offer quick setting times & adequate detail capture, facilitating rapid production of dental models for forensic examination. While, Traditional materials continue to serve a purpose, the adoption of advanced casting materials has revolutionized forensic odontology by enhancing- efficiency, precision & archival integrity

Effects of canopy gaps on microclimate, soil biological activity and their relationship in a European mixed floodplain forest

Forest canopy gaps can influence understorey microclimate and ecosystem functions such as decomposition. Gaps can arise from silviculture or tree mortality, increasingly influenced by climate change. However, to what degree canopy gaps affect the buffered microclimate in the understorey under macroclimatic changes is unclear. We, therefore, investigated the effect of forest gaps differing in structure and size (25 gaps: single tree gaps up to 0.67 ha cuttings) on microclimate and soil biological activity compared to closed forest in a European mixed floodplain forest. During the investigation period in the drought year 2022 between May and October, mean soil moisture and temperature as well as soil and air temperature fluctuations increased with increasing openness. In summer, the highest difference of monthly means between cuttings and closed forest in the topsoil was 3.98 ± 9.43 % volumetric moisture and 2.05 ± 0.89 °C temperature, and in the air at 30 cm height 0.61 ± 0.35 °C temperature. For buffering, both the over- and understorey tree layers appeared as relevant with a particularly strong influence of understorey density on soil temperature. Three experiments, investigating soil biological activity by quantifying decomposition rates of tea and wooden spatulas as well as mesofauna feeding activity with bait-lamina stripes, revealed no significant differences between gaps and closed forest. However, we found a positive significant effect of mean soil temperature on feeding activity throughout the season. Although soil moisture decreased during this period, it showed no counteracting effect on feeding activity. Generally, very few significant relationships were observed between microclimate and soil biological activity in single experiments. Despite the dry growing season, decomposition rates remained high, suggesting temperature had a stronger influence than soil moisture. We conclude that the microclimatic differences within the gap gradient of our experiment were not strong enough to affect soil biological activity considerably.

Post-mortem intervals estimation by determination of insect diversity

ABSTRACT Dipteran flies have been employed to measure the post-mortem period examination with the help of decomposition of the carcasses. The current study attempted to update the baseline data of the insects to determine the post-mortem interval. Five decomposition stages were observed but the complete decomposition of (Oryctolagus cuniculus) rabbits in winter took place in 21 days and in spring in 12 to 15 days. Decomposition period in both trials varied due to temperature fluctuations. Odours were released at different stages of decay and blow flies were the first insect to come on carcasses. The species that identified were the blowfly (Calliphoridae) (34.4% | 49.12%), blue fly (Calliphora) (17.24% | 41.22%), flesh fly Sarcophagidae (20.68% | 5.26%), and house fly (Muscidae) (27.58% | 4.38%) in the first trial and second trial respectively. The timing of the various arthropod species’ arrivals and their correlation with various decompositional phases throughout both trials suggested that they could be useful for determining the PMI (post-mortem interval) in forensic investigations. This study showed that insect fauna on the corpse is a tool for estimating post-mortem interval and plays an important role in forensic entomology to analyse the suspicious suspect.