Flower Fresh Weight Research Articles

Determination of natural populations to be included in breeding program in St. John's wort species (Hypericum perforatum L.).

St. John's wort (Hypericum perforatum L.) is a medicinal and aromatic plant of rapidly increasing importance. The cultural production of this species, which is of economic importance due to its medicinal properties, is limited. One of the main ways to increase production is to develop cultivars. Thus, the homogeneous raw material required for a standard product will be provided. This study aimed to determine the characteristics of natural populations to obtain productive cultivars with high hypericin and hyperforin that can meet market demands. In addition to yield and quality values, other characteristic features of the plant such as flower diameter, petal length and petal width, which directly affect productivity, were revealed in the study. The study was conducted under field conditions for two years with three replications. Fresh flower weight among the populations varied between 30.15 and 240.28 g/plant, while the hypericin ratio varied between 51.32 and 105.31 (mg/100 g). The study determined a wide variation among the populations, and the populations with superior characteristics were included in the breeding program.

Application of machine learning algorithms for predicting the life-long physiological effects of zinc oxide Micro/Nano particles on Carum copticum

Nanoparticles impose multidimensional effects on living cells that significantly vary among different studies. Machine learning (ML) methods are recommended to elucidate more consistence and predictable relations among the affected parameters. In this study, nine ML algorithms [Support-Vector Regression (SVR), Linear, Bagging, Stochastic Gradient Descent (SGD), Gaussian Process, Random Sample Consensus (RANSAC), Partial Least Squares (PLS), Kernel Ridge, and Random Forest] were applied to evaluate their efficiency in predicting the effects of zinc oxide nanoparticles (ZnO NPs: 0.5, 1, 5, 25, and 125 µM) and microparticles (ZnO MPs: 1, 5, 25, and 125 µM) on Carum copticum. The plant root/shoot biomass; number of leaves, branches, umbellates, and flowers; protein content; reducing sugars; phenolic compounds; chlorophylls (a, b, Total); carotenoids; anthocyanins; H2O2; proline; malondialdehyde (MDA); tissue zinc content; superoxide dismutase (SOD) activity; and media ΔpH were measured and considered input variables. All levels of ZnO MPs treatments increased growth parameters compared to the control (ZnSO4). The highest shoot/root fresh and dry mass were recorded at 5 µM ZnO MPs compared with the control. The root fresh/dry mass under ZnO NPs treatments was more sensitive than shoot parameters. The number of flowers increased by 134 and 79% in MPs and NPs treatments compared to the control, respectively. ZnO NPs reduced protein content by up to 81% in 125 µM NPs compared to ZnSO4. Reducing sugar content increased to 25, 40 and 36% in 5, 25, 125 µM MPs and 67, 68, 26, 26 and 21% in 0.5, 1, 5, 25 and 125 µM NPs treatments, respectively. The pH alteration was more significant under NPs and affected zinc uptake. All levels of ZnO NPs treatments increased growth parameters compared to the control. All ML algorithms showed varied efficiencies in predicting the nonlinear relationships among parameters, with higher efficiency in predicting the behavior of root and shoot dry mass, root fresh weight and number of flowers according to R2 index. The model obtained from SVR with the radial basis function (RBF) kernel was selected as a comprehensive model for predicting and determining the efficacy of the results.

Effect of Pinching on Growth, Yield, and Quality of African Marigold (Tagetes erecta L.) cv. Pusa Narangi Gainda

Marigold is a very common and a hardy flower crop cultivated throughout the world. Pinching is an important intercultural practice commonly followed in cultivation of marigold however, this needs to be standardized for getting higher yields in commercial cultivation. Hence, the present investigation was conducted at Rajasthan Agricultural Research Institute, Durgapura, Jaipur, Division of Horticulture, during 2020-21 and 2021-22 to standardize the commercial pinching practice for getting higher productivity. Three levels of pinching (no pinching, single at 20 days and double at 20 and 40 days after transplanting) were used in the course of the research arranged using a factorial randomized block layout with three replications applied to African marigold variety Pusa Narangi Gainda. The results revealed that treatment P0 (No pinching) was discovered to be the finest in increment in height of plant, early flower bud initiation flower opening and treatment P2 (Double pinching) in boosting spread of plant, primary branches, length of leaf, leaf width, leaf area, plant fresh weight, plant dry weight, total biomass, root- shoot ratio, 50% flowering, flower diameter, stalk and ray floret length, fresh and dry flower weight, mass and number of flower per plant, flower yield additionally improved quality characteristics like chlorophyll and xanthophyll content in marigold. Hence, it might be concluded that application of double pinching can be helpful and recommended in improving yield as well as quality characteristics in commercial cultivation of marigold.

English

The current study was conducted in growth chamber with the aims to examine the effect of different soil types and temperature regimes on quantitative and qualitative traits of saffron and to assess the agro-climatic suitability of selected sites of Poonch Division of Azad Jammu & Kashmir for field scale saffron cultivation. Soil from 07 sites was collected and processed for pot filling. A total of 63 plastic pots (21 for each temperature level i.e., 19, 26 and 32 oC), were filled with soils of each site and incubated separately in growth chambers. The pots were arranged under completely randomized design (CRD) replicated thrice. Results indicated that maximum number of flowers (1.35 per plant), flower fresh weight (29.03 mg per plant), stigma length (1.21 cm), stigma fresh weight (8.97 mg per plant) and stigma yield (8.60 mg per pot) was recorded for Khaigala site (loam textured soil) at 26 oC followed by Trarkhel (sandy loam textured soil) and Abbaspur (loam textured soil) sites. On an average, maximum 58.30 days were taken to initiate flowering in soil of Alisojal site (clay loam textured soil) with flowering period of 17.06 days. The maximum number of daughter corms (2.92 per plant), corm diameter (9.61 mm), corm weight (15.76 g per plant), corm yield (47.28 g per pot), picrocrocin (11.32%) and safranal (0.22%) content was again recorded for Khaigala site (at 26 oC). However, maximum crocin content (14.33%) was noted for Alisojal site (1831 m altitude). The Cluster and PC analyses revealed that Khaigala, Trarkhel and Abbaspur sites produced saffron of better quality and agro-climatically suitable for establishment of saffron. Further, the saffron grown on loam and sandy loam textured soils showed better performance compared to that of clay textured soils.

Advanced Dehydration Techniques Standardized for Flowers of Gomphrena globosa L.

The present experiment was conducted on standardizing dehydration technique for Gomphrena globose flower by using embedding drying methods in room temperature and hot air oven at 55°C was done. The experiment consisted of 10 treatments with 3 replications designed in completely randomized design. Treatments used were as; T1-Boric acid (room temperature), T2-Silica gel (room temperature), T3-Sand (room temperature), T4-Sawdust (room temperature), T5-Cocopeat (room temperature), T6-Boric acid (hot air oven at 55 °C), T7-Silica gel (hot air oven at 55 °C), T8-Sand (hot air oven at 55 °C), T9-Sawdust (hot air oven at 55 °C), T10-Cocopeat (hot air oven at 55 °C). The most reduction in flower fresh and dry weight, measuring 2.36 and 2.12 g, was observed in Treatment T7 (Silica gel with hot air oven at 55°C), where silica gel was employed as the desiccant. The least reduction in flower fresh and dry diameter, measuring 1.92 and 1.81 g, was observed in Treatment T7 (Silica gel with hot air oven at 55°C), where silica gel was employed as the desiccant. The highest drying duration for gomphrena in T3 (Sand) and T4 (Sawdust) treatments was 234.21 and 210.40 hrs at room temperature. The boric acid and silica gel demonstrated outstanding performance in terms of quality parameters, including texture, color, and overall appearance. Among all treatment, embedding drying with silica with hot air oven dehydration at 55°C was found to be best in term of reduction in weight, diameter and overall colour, appearance and texture of Gomphrena globose flowers.

Growth and production of cat's whiskers plant biomass (Orthosiphon aristatus Bl. Miq.) In various accessions and harvest intervals

Cat's whiskers plant is an ornamental plant used as a medicinal plant. The part of the cat's whiskers plant used is leaves. Accessions and harvest intervals are essential for increasing optimal yields to plant biomass growth and results. This study aims to determine the effect of differences in accession, intervals, and interactions between accession differences and intervals on the growth and production of a cat's whiskers biomass. The design used in this study is a complete group design of being randomized with two treatment factors. The first factor has two treatment levels: white flowering accessions (A1) and purple flowering accessions (A2). The second factor is a harvest interval with four treatment levels, namely a 1-week harvest interval (P1), two weeks (P2), three weeks (P3), and six weeks (P4). The results showed that accession treatment significantly affected the number of books, number of branches, flowering ages, leaf fresh weight, leaf dry weight, and leaf simplicia yields. Harvest interval treatment significantly affects the height of the shoots, number of shoots, number of branches, number of leaves, flowering ages, leaf fresh weight, stem fresh weight, flower fresh weight, leaf dry weight, stem dry weight, flower dry weight, and leaf simplicia yield. Accession interactions with harvest intervals significantly affect the height of the shoots, number of shoots, number of branches, number of leaves, flower fresh weight, stem dry weight, and leaf simplicia yields.

Termite mound soil based potting media: a better approach towards sustainable agriculture.

Termite mound soils are known to possess unique physico-chemical and biochemical properties, making them highly fertile. Considering their rich nutrient content, the objective of the current experiment is to assess the physico-chemical properties and enzyme activities of termite mound based potting media and evaluate theirperformance for further exploration in floriculture. Potting media consisting of termite mound soil (TS) of a subterranean termite, Odontotermes obesus were prepared in 7 different combinations with garden soil (GS), sand (S) and farmyard manure (FYM) and a control (without termite mound soil), i.e., T1 (TS, GS, S, FYM (v:v:v:v /1:2:1:1)), T2 (TS, GS, S, FYM (v:v:v:v / 2:1:1:1)), T3 (TS, S, FYM (v:v:v / 2:1:1)), T4 (TS, GS, FYM (v:v:v / 2:1:1)), T5 (TS, GS, S (v:v:v / 2:1:1)), T6 (TS, S, FYM (v:v:v / 3:1:1)), T7 (TS, S, FYM (v:v:v / 1:1:2)) and control (GS, S, FYM (v:v:v / 2:1:1)). The samples were then analysed in laboratory. Experimental analysis on physico-chemical and biological parameters revealed superiority of T7 (TS, S, FYM (v:v:v / 1:1:2)) in terms of pH (7.15), organic carbon (2.13%), available nitrogen (526.02 kg ha-1), available phosphorus (56.60 kg ha-1), available potassium (708.19 kg ha-1), dehydrogenase activity (18.21 μg TTF g-1 soil day-1), Phosphomonoesterase (PME) activity (46.68 54 μg p-nitrophenol/gsoil/h) and urease activity (3.39 μg NH4-N g-1 soil h-1). Whereas T4 (TS, GS, FYM (v:v:v /2:1:1)) registered superiority in terms of PME activity (50.54 μg p-nitrophenol/gsoil/h), Fluorescein diacetate (FDA) activity (11.01 μgfluorescein/gsoil/h) and Soil Microbial Biomass Carbon (SMBC) (262.25 μg/g). Subsequent to the laboratory analysis, two best potting mixtures (T7 & T4) were selected and their performance was assessed by growing a test crop, Tagetes erecta cv. Inca Orange. Considering the growth parameters, the potting media: T7 was found to be significantly superior in terms of plant spread (39.64 cm), leaf area index (4.07), fresh weight (37.72 g), yield (317.81 g/plant), and diameter (9.38 cm) of flower over T4 & control. The Benefit:Cost (B:C) ratio meaning the ratio of net returns to total cost of cultivation was determined. The B:C ratio of raising marigold flower as potted plant in T7 was 1.10 whereas the B:C ratio of the potting mixture of T7 was 2.52. This shows that T7 potting media is also economically viable choice for commercial purposes.

Effect of photoperiod and chemical retardants on growth and flowering of pot mums (<i>Dendranthema grandiflora</i> Ramat)

Potted plants of chrysanthemum varieties namely Arun Kumar and Sweta Singar, were exposed to 8 h light and 16 h darkness and natural photoperiod, and spayed with maleic hydrazide (1000 and 2000 ppm), cycocel (1500 and 3000 ppm) and control (distilled water) in factorial complete block design with three replications. The results revealed that controlled photoperiod of 8 h light and 16 h darkness was found significantly superior over natural photoperiod with regard to minimum internodal length (2.85 cm), days to floral bud initiation (98.88), maximum flowering duration (23.14 days), flowers plant-1 (189.50), flower diameter (2.72 cm), fresh weight of flower (1.16 g) and vase life (14.86 days). Among growth retardants, maleic hydrazide (2000 ppm) significantly recorded minimum plant height, maximum branches plant-1 (18.85), flowering duration (25.25 days), flower diameter (2.95 cm), flowers per plant-1 (194.90) and weight of flower (1.20 g), while, maleic hydrazide (1000 ppm) recorded minimum internodal length (2.65 cm) and maximum vase life (18.00 days). The cv. Arun Kumar under controlled photoperiod recorded minimum internodal length (2.38 cm) and early floral bud initiation (91.04 days), however, maleic hydrazide (2000 ppm) recorded maximum flower diameter (4.05 cm), fresh weight of flower (1.53 g) and vase life (18.50 days). cv. Arun Kumar under controlled photoperiod treated with CCC-3000 ppm showed the best performance in recording the maximum number of flowers plants-1 (138.00) during first fortnight of flowering.

Influence of growing condition, spacing and nutrition on flower quality and post harvest life of Heliconia genotypes

Heliconia, a high value flower crop can assure sizable income to farmers with minimum investment and care. Suitable agro techniques help in obtaining maximum number of high quality flowers. Therefore, field trial was undertaken at the Department of Horticulture, University of Agricultural Sciences, Dharwad during 2021-22 to understand the influence of growing condition, spacing and nutrition to improve the flower quality and post harvest life of Heliconia genotypes. The experiment was laid out in strip plot design with three replications and sixteen treatment combinations comprised of two growing conditions as main plot (M1:Coconut garden and M2:Shade house) and combinations of genotypes, spacing and nutrition as eight sub plots [G1:Orange (H. latispatha), G2:Kenea Red (H. psittacorum), S1:40 × 40 cm, S2:40 × 60 cm, N1:100% recommended dose of fertilizer (RDF) and N2:75% RDF]. Result indicated significant difference with all flower quality parameters and post harvest life. Plants in shade house exhibited highest values for all the characters compared to plants in coconut garden. The interaction found significant for stem length (54.01 cm) which was higher under T13 (M2G2S1N1). Treatment combination T11 (M2G1S2N1) recorded maximum stem girth (2.37 cm), spike length (19.87 cm) and spike width (21.67 cm). The same treatment combination (T11:M2G1S2N1) recorded maximum fresh weight of flowers (117.68 g), lowest physiological loss in weight (23.26%) and highest vase life of 16.60 days. and the same treatment combination can be suggested to get good quality flowers with extended vase life in Heliconia.

Postharvest Chemical Treatment of Physiologically Induced Stem End Blockage Improves Vase Life and Water Relation of Cut Flowers

Wound-induced xylem occlusion significantly affects the vase life of cut flowers, as oxidative stress and the polymerization of phenolic compounds lead to the deposition of phenolic compounds/secondary metabolites in the stem ends of cut flowers to heal open tissues of freshly cut stems and prevent microbial invasion. However, this deposition causes blockage of vessels, reduced water uptake, and shortened vase life. The physiological plugging of vessels is linked with various oxidative enzymes’ (PAL, PPOs, LACs, and COs) actions taken to increase the synthesis of different compounds, e.g., lignin, suberin, tyloses, gel, and latex, in wounded areas. The use of chemical preservatives/enzyme inhibitors is one of the safest and most efficient techniques employed to minimize vascular blockage and inhibit phenolic compounds deposition and exudation. This review mainly discusses the types of oxidative enzymes, their pathways and biochemistry along with production of secondary metabolites, their biosynthesis, and their modes of action involved in vascular blockage. It also summarizes the different types of preservatives used in postharvest treatments to improve relative water uptake, flower fresh weight, petal protein content, and hydraulic conductance and prolong the vase life of cut flowers during storage. It is hoped that this elaborate study will help researchers in designing new studies concerning occlusion caused by the accumulation of phenolic compounds in vessels.

Correlation and path-coefficient analysis in chrysanthemum (Chrysanthemum morifolium Ramat.)

A study was conducted to determine association between seventeen traits of twenty genotypes of chrysanthemum. The results revealed strong positive correlation of flower yield per plant with flower yield per plot, plant height at 60 days after transplanting and at full bloom, number of primary branches, plant spread (N-S and E-W direction), number of leaves per plant, stem girth and flowers yield per ha. The findings of path analysis revealed that flower yield per hectare, plant height at 60 days after transplanting, plant spread in E-W direction, stem girth, days to bud initiation, days to full bloom, fresh weight of flower and number of flowers per plant had positive direct effect on yield of flowers per plant. Hence, it is concluded from this study that flower yield can be increased by selecting these traits directly while formulating crop improvement program in chrysanthemum.

Genotype X Traits Analysis of Gerbera (Gerbera jamensoii) Varieties for Vegetative Traits by Biplots

Recent ten genotypes of gerbera were evaluated for vegetative traits during the year 2022-23 to determine genetic variability, heritability and genetic advance for 15 quantitative traits. Analysis of variance showed significant differences among genotypes for all the characters studied. Results revealed that magnitude of the Phenotypic Coefficient of Variation (PCV) was higher than Genotypic Coefficient of Variation (GCV) for all the traits, indicating greater genotype and environment interaction. High PCV and GCV were observed for number of leaves/plant and leaf width. In the present study bud initiation, plant spread after 100 days of panting, plant height after 45 days of planning showed the high heritability along with maximum genetic gain. Number of leaves (45 days) had maintained only positive correlation with the considered vegetative traits. Leaf length (45 days) exhibited showed direct relationship with plant height (45 days) and leaf length(100 days) while negative relation of plant spread (45 days) with leaf length (100 days) and days to bud initiation. Path coefficient analysis showed, plant spread (0.976) had highest positive effect on fresh weight of flowers followed by leaf length (0.824), number of leaves per plant (0.20) while negative effect of plant height (45 and 100 days), days to bud initiation, leaf length (100 days). Performance of Intense, Stanza, Brillance would be unstable type as compared to Golian and Dana Ellen as placed near to the origin of biplot analysis in the present study based on vegetative traits in biplot analysis. Next cluster in same quadrant was comprised of leaf length, leaf width, plant height at 45 days of planting. First cluster of other quadrant comprised of leaf length, leaf width, plant spread at 100 days of planting and last cluster of days to bud initiation with fresh weight of flowers formed across the quadrants.

Variation in the amount of pollen per male flower on Abies sachalinensis

Abstract It is important to evenly increase the amount of scattered pollen per clone for maintaining high genetic variation in clonal seed orchards. It is thus imperative to determine not only the number of male flowers per tree, but also the amount of pollen per male flower in each clone. In this study, the existence of annual variation on the fresh weight of male flowers (FW) and the clonal and annual variation, and ramets’ variation with the same or different tree ages on the weight of pollen per male flower (WP) were investigated using 21 Abies sachalinensis clones for 3 years. The results indicated that there were significant differences in FW and WP among clones each year and the relationships between FW and WP were linearly significant for every year. WP also showed significant annual variation, while the re was also significant variation in ramets. The clonal repeatability regarding WP was 0.37—0.47 for data obtained for 2 or 3 years and the generalized linear mixed models with the random effects of clone, year, and ramet indicated that the effect of clone more strongly affected WP than other effects. These results suggested that WP on A. sachalinensis is a trait that is considerably influenced by clonal characteristics; there is thus a need to characterize this trait in each clone when using seed orchards.

Studies on Performance of Vegetative & Floral Parameters of Different Varieties under Polyhouse Condition

The experiment was conducted in Randomized Block Design with ten cultivars and replicated thrice. The cultivars used in the experiment of Rose viz., Top Secret (T1), Jumelia (T2), Avalanche (T3), Gold Strike (T4), Revival (T5), Naranga (T6), Solaire (T7), Hot Shot (T8), Volcano (T9) and Peach Avalanche (T10). The maximum number of leaves per 10 cm middle shoot length (5.01), longest flower stalk length (59.50 cm) maximum stem girth (0.73 cm), was recorded significantly in Top Secret (T1). Earliest first bud initiation (27.01 days) & earliest first harvest (32.37 days) were recorded in Revival (T5) and maximum fresh weight of flower (43.95 g).

Effects of Active and Passive Modified Atmosphere Packaging on the Vase Life and Quality of Narcissus (Narcissus tazetta L.) ‘Shahla’ Cut Flowers

Abstract The production of ornamental flowers in the horticultural sector is costly; therefore, finding treatments to reduce postharvest losses and extend the vase life of cut flower is essential in this industry. The influence of modified atmosphere packaging (MAP) on the quality parameters of cut flowers of Narcissus tazetta L. ‘Shahla’ during storage was investigated. The following gas compositions were studied: atmospheric composition (control), vacuum + atmospheric composition, 40% CO2 + 21% O2, 20% CO2 + 10% O2, 40% CO2 + 40% O2, and 0.03% CO2 + 40% O2. All treatments showed better performance compared to the control. The results showed that 20% CO2 + 10% O2 most increased the water uptake and relative fresh weight of cut flowers, resulting in the highest level of carbohydrates, extending the appearance quality time and vase life of cut flowers by 60%. The most extended vase life was related to cut flowers stored at 20% CO2 and 10% O2 (15.8 days), while the passive-MAP and vacuum packaging did not differ significantly and showed the lowest vase life, 9.2 and 9.9 days, respectively.

Ozonated water soaking improves the flower growth, antioxidant activity, and bioactive compound accumulation in Agastache rugosa

Ozonated water (OW) is now being recognized as an innovative and eco-friendly solution for managing plant growth while also promoting the production of bioactive compounds and essential plant metabolites. This study aimed to identify the most effective duration of OW treatment to promote plant growth and accumulation of antioxidant activity and bioactive compounds in Agastache rugosa in a plant factory. Whole plants were subjected to OW soaking treatments for varying durations (0, 1, 10, 20, 40, and 80 s) at a concentration of 1 µmol·mol−1, once per week, at 0, 1, 2, 3, and 4 weeks after transplantation. Five weeks after transplantation, plant samples were collected for the analysis of their plant growth parameters, photosynthetic pigments and parameters, total flavonoid, antioxidant activity, and bioactive compounds. Stem length was decreased in all OW treatments, while the number of flower branches, the flower fresh and dry weights were significantly increased under 20, 40, and 80 s OW treatments than in the control group. The net photosynthetic rate decreased significantly in 20, 40, and 80 s OW treatments compared with the control. Chlorophyll a concentration was the highest in the 20-s OW treatment, and chlorophyll b concentration was the highest in the 10-s OW treatment. Total flavonoid levels in plants increased significantly under 20-, 40-, and 80-s OW treatments, and their antioxidant activity (superoxide dismutase, catalase, and peroxidase) were significantly higher under 40- and 80-s OW treatments than in the control. Rosmarinic acid content increased significantly under the 10- and 40-s OW treatments, whereas the tilianin and acacetin contents increased significantly under the 20-, 40-, and 80-s OW treatments compared to those in the control. Our results suggest that soaking whole plants in OW for 20–80 s enhances the flower growth and bioactive compounds in A. rugosa for medicinal use.Graphical

Pengaruh Kombinasi Pupuk Kandang Sapi dan Konsentrasi Pupuk Organik Briket terhadap Pertumbuhan dan Hasil Tanaman Marigold (Tagetes patula L.) Varietas Prancis Petite Orange .

Marigold (Tagetes patula L.) is an ornamental plant that has benefits in various sectors. The quantity of marigold flower production is related to the cultivation technique used. Soil conditions also affect the level of plant fertility. This can be overcome by means of fertilization. The aim of this study was to obtain a combination of doses of cow manure and bricket organic fertilizer concentration which gave the highest growth and yield of marigold plants (Tagetes patula L.) var French Petite Orange. The research was conducted at the Soursop Gardens of Casamora, City Parks and Forest Service, Ciganjur, Jagakarsa, DKI Jakarta in March - June 2023. The research method used was an experimental method with a Single Factor Randomized Block Design (RBD) consisting of 5 treatments repeated 5 time. The treatment consisted of A (0 ton/ha Cow Manure + 0 ml Organic Fertilizer Briquette) (control), B (15 ton/ha Cow Manure + 1.5 ml/liter of water Briquette Organic Fertilizer), C (20 ton/ha Manure Cattle + 1.5 ml/liter of water Organic Fertilizer Briquettes), D (15 tons/ha Cow Manure + 3 ml/liter of water Organic Fertilizer Briquettes), E (20 tons/ha Cow Manure + 3 ml/liter of Briquette Organic Fertilizer water ). The results showed that there was a significant effect of giving a combination of doses of cow manure and briquette organic fertilizer concentration in treatment E (20 tons/ha of cow manure + 3 ml/liter of water of briquette organic fertilizer) on flower diameter (32.49 mm), number of flowers (7.47), the number of branches (6.07) the yield of fresh weight of flowers (10.19 g), the yield of dry weight of flowers (3.74 grams), the yield of total fresh weight of plants (192.69 g), and the yield of dry weight total plant (54.55 g).

The Effect of Administration of Cow Stage and NPK Fertilizer on The Growth and Results of Chrysan Plants (Chrysantthemum morifolium, R.)

Chrysanthemum (chrysanthemum morifolium R.), is an ornamental plant that has economic value and has the potential to be developed in national and international trade. This study aims to determine the effect of the type of cow manure and NPK fertilizer dosage on growth and yield of chrysanthemum plants. The hypothesis put forward in this study was that cow manure (20 tons ha-1) and NPK fertilizer doses (1000 kg/ha) could increase growth and yield of chrysanthemum plants. The experimental design used in this study was a factorial randomized block design with 2 treatments, namely the type of organic cow manure (S) consisting of 4 levels, namely: S0 = without cow manure, S1 = 10 ton/ha-1 cow manure, S2 = 20 tons/ha-1 cow manure, S3 = 30 tons/ha-1 cow manure, and the dosage of NPK fertilizer consists of 4 levels, namely: D0= without NPK fertilizer, D1= 1000 kg/ha, D2= 2000 kg/ha, D3 = 3000 kg/ha. Research data were analyzed statistically using analysis of variance. For a single treatment that had a significant to very significant effect, it was continued with the LSD test at the 5% level. The results of statistical analysis showed that the interaction between the type of cow manure and the dose of NPK fertilizer (S x D) had no significant effect on (P≥0.05) on all observed variables. The highest economic fresh weight of flowers was obtained at the type of manure 20 tons/ha, namely 26.53 g, compared to no organic fertilizer, namely 23.55 g. The highest economic fresh weight of flowers was at a dose of NPK 1000 kg/ha (D1), namely: 26.26 g, compared to NPK 2000 kg/ha is 24.98 g.
 

The effect of AB mix fertilizer concentration on the yield of Marigold (Tagetes erecta) under hydroponic condition

In hydroponic substrate cultivation, nutrients are only sourced from fertilizers; therefore, fertilizer application must pay attention to concentration. The right concentration of fertilizer, namely AB Mix, affects the quality of marigold flowers (Tagetes erecta). The purpose of this study was to examine the effect of flower AB mix fertilizer concentration and obtain the best AB mix fertilizer concentration for marigold flower yields on cultivated hydroponic substrate. This research was carried out in May–July 2022 at the screen house of the Horticulture Industry Technology Study Program. The study used Group Randomized Design (GRD), with AB mix fertilizer treatment tested at a concentration of 1000; 1100; 1200; 1300; 1400; 1500; and 1600 ppm. The data obtained were analyzed with various fingerprints and continued with the honest significant difference (HSD) test level of 5% if there was a real effect. The parameters observed are the number of flowers, the diameter of the flower, and the fresh weight of the flower per plant. The results obtained are: 1. The concentration of AB mix fertilizer has a significant influence on the number of flowers, flower diameter, and fresh weight of flowers per plant). AB mix fertilizer with a concentration of 1,200 ppm is the best concentration because it produces marigold plants with the highest number of flowers (17.67 florets), the widest flower diameter (in the first harvest it was 79.31 mm, the second harvest was 78.12 mm, and the third harvest was 78.16 mm), and the heaviest flower weight (in the first harvest it was 15.11 g, the second harvest was 14.33 g, and the third harvest was 12.67 g).

Quantitative and qualitative evaluation of saffron (Crocus sativus L.) for genetic variability, character association and path analysis

Different accessions of saffron were studied to analyze genetic diversity and heritable component of variation in yield and yield related traits. Dry pistil weight, fresh pistil weight, fresh flower weight corm-1 line-1, number of flowers corm-1 line-1, and big corm index, all had high genotypic coefficient of variation, heritability and genetic advance. The traits included in the selection scheme, correlation among traits (floral and agronomic) are important as varieties must have high yield associated with exemplary quality parameters. At both phenotypic and genotypic levels, the association was found significant among the traits. Stigma length and fresh flower weight had strong direct effect with respect to dry pistil weight followed by number of flowers corm-1 line-1, fresh pistil weight and big corm index. Therefore, these parameters can be taken as criteria for selection.