fliK Mutant Research Articles

The fliK Gene Is Required for the Resistance of Bacillus thuringiensis to Antimicrobial Peptides and Virulence in Drosophila melanogaster.

Antimicrobial peptides (AMPs) are essential effectors of the host innate immune system and they represent promising molecules for the treatment of multidrug resistant microbes. A better understanding of microbial resistance to these defense peptides is thus prerequisite for the control of infectious diseases. Here, using a random mutagenesis approach, we identify the fliK gene, encoding an internal molecular ruler that controls flagella hook length, as an essential element for Bacillus thuringiensis resistance to AMPs in Drosophila. Unlike its parental strain, that is highly virulent to both wild-type and AMPs deficient mutant flies, the fliK deletion mutant is only lethal to the latter’s. In agreement with its conserved function, the fliK mutant is non-flagellated and exhibits highly compromised motility. However, comparative analysis of the fliK mutant phenotype to that of a fla mutant, in which the genes encoding flagella proteins are interrupted, indicate that B. thuringiensis FliK-dependent resistance to AMPs is independent of flagella assembly. As a whole, our results identify FliK as an essential determinant for B. thuringiensis virulence in Drosophila and provide new insights on the mechanisms underlying bacteria resistance to AMPs.

Deletion of a previously uncharacterized flagellar-hook-length control gene fliK modulates the σ 54-dependent regulon in Campylobacter jejuni

A previously unannotated, putative fliK gene was identified in the Campylobacter jejuni genome based on sequence analysis; deletion mutants in this gene had a 'polyhook' phenotype characteristic of fliK mutants in other genera. The mutants greatly overexpressed the sigma(54)-dependent flagellar hook protein FlgE, to form unusual filamentous structures resembling straight flagella in addition to polyhooks. The genome sequence reveals only one gene predicted to encode an orthologue of the NtrC-family activator required for sigma(54)-dependent transcription. Hence, all sigma(54)-dependent genes in the genome would be overexpressed in the fliK mutant together with flgE. Microarray analysis of genome-wide transcription in the mutant showed increased transcription of a subset of genes, often downstream of sigma(54)-dependent promoters identified by a quality-predictive algorithm applied to the whole genome. Assessment of genome-wide transcription in deletion mutants in rpoN, encoding sigma(54), and in the sigma(54)-activator gene flgR, showed reciprocally reduced transcription of genes that were overexpressed in the fliK mutant. The fliA (sigma(28))-dependent regulon was also analysed. Together the data clearly define the roles of the alternative sigma factors RpoN and FliA in flagellar biogenesis in C. jejuni, and identify additional putative members of their respective regulons.

FliK regulates flagellar hook length as an internal ruler.

The mechanism of length control of the flagellar hook is under debate between two theories. One claims that the FliK directly measures the hook length as a molecular ruler, while the other claims that the cytoplasmic substructure measures the amount of hook subunits to determine the hook length. Both agree that the FliK C-terminal domain catalyses the substrate-specificity switch to terminate hook elongation. In this study, we systematically created fliK mutants with deletions and insertions at various sites within the FliK N-terminal domain and analysed their effects on the final hook length. Insertions of peptide fragments from the Yersinia YscP into FliK gave rise to hooks with defined lengths, which was proportional to the molecular size of the FliK-YscP chimeras. Among fliK deletion mutants, only those with small truncations in three specific sites of FliK produced hooks of a defined, shortened length. For the majority of deletion mutants, FliK was secreted, but hook length was not controlled. On the other hand, for some deletion mutants FliK was not secreted, but the hook length was controlled, indicating that FliK secretion is not necessary for hook-length control. We conclude that FliK regulates hook length as an internal molecular ruler.

Two Parts of the T3S4 Domain of the Hook-length Control Protein FliK Are Essential for the Substrate Specificity Switching of the Flagellar Type III Export Apparatus

The switch in export specificity of the type III flagellar protein export apparatus from rod/hook type to filament type is believed to occur upon completion of hook assembly by way of an interaction of the type III secretion substrate specificity switch (T3S4) domain of the hook-length control protein FliK, with the integral membrane export apparatus component FlhB. The T3S4 domain of FliK (FliK T3S4) consisting of amino acid residues 265–405 has an unstable and flexible conformation in its last 35 residues (FliK CT). To investigate the role of FliK T3S4 in substrate specificity switching, we studied the effect of deletions and point mutations within this domain and characterized suppressor mutations. Deletions of ten amino acid residues within the region of residues 301–350 and five amino acids of residues 401–405 abolished switching of export specificity. Site directed mutagenesis showed that highly conserved residues, Val302, Ile304, Leu335, Val401 and Ala405, are essential, and that the five C terminal residues (401–405) are restricted in conformation for the switching process. Suppressor mutant analysis of the fliK(S319Y) mutant, which produces extended hooks with filaments attached due to delayed switching, suggested that FliK T3S4 interacts with the C terminal half of the cytoplasmic domain of FlhB (FlhB C). We propose a two step binding model of FliK T3S4 and FlhB C, in which residues 301–350 of FliK bind to FlhB C upon hook assembly completion at about 55 nm, and then unfolded FliK CT binds to FlhB C to trigger the switch in substrate specificity.

FliK, the protein responsible for flagellar hook length control in Salmonella, is exported during hook assembly.

In wild-type Salmonella, the length of the flagellar hook, a structure consisting of subunits of the hook protein FlgE, is fairly tightly controlled at approximately 55 nm. Because fliK mutants produce abnormally elongated hook structures that lack the filament structure, FliK appears to be involved in both the termination of hook elongation and the initiation of filament formation. FliK, a soluble protein, is believed to function together with a membrane protein, FlhB, of the export apparatus to mediate the switching of export substrate specificity (from hook protein to flagellin) upon completion of hook assembly. We have examined the location of FliK during flagellar morphogenesis. FliK was found in the culture supernatants from the wild-type strain and from flgD (hook capping protein), flgE (hook protein) and flgK (hook-filament junction protein) mutants, but not in that from a flgB (rod protein) mutant. The amount of FliK in the culture supernatant from the flgE mutant was much higher than in that from the flgK mutant, indicating that FliK is most efficiently exported prior to the completion of hook assembly. Export was impaired by deletions within the N-terminal region of FliK, but not by C-terminal truncations. A decrease in the level of exported FliK resulted in elongated hook structures, sometimes with filaments attached. Our results suggest that the export of FliK during hook assembly is important for hook-length control and the switching of export substrate specificity.

Effect of cellular level of fliK on flagellar hook and filament assembly in Salmonella typhimurium

Frameshift mutations in the fliK gene of Salmonella result in abnormal elongation of the hook and the failure to assemble filament (polyhook phenotype). Second-site suppressor mutations restore filament assembly, but the cells often remain defective in hook-length control (polyhook-filament phenotype). Where the suppressor mutations are intragenic, the second mutation restores the original frame, generating a region of frameshifted sequence, but restoring the natural C terminus. Some of these frameshifted sequences contain a UGA (opal) termination codon. These cells have few flagella and swarm poorly. We suspected that readthrough of UGA by tRNATrp might be the reason for the partial function. When the UGA codon was changed to the Trp codon UGG, flagellar assembly and function were restored to wild-type levels. Conversely, underexpression of the wild-type fliK gene, achieved by changing the sole Trp codon in the sequence (Trp271) to UGA, decreased both the number of flagella and the ability to swarm. These results validate the readthrough hypothesis and indicate that low levels of FliK sustain some degree of flagellation and motility. At low levels of FliK, most flagella had polyhooks. With increasing amounts, the morphology progressively changed to polyhook-filament, and eventually to wild-type hook-filament. When FliK was overproduced, the hook length was slightly shorter (46(±7) nm) than that of the wild-type strain (55(±9) nm). FliK levels were measured by immunoblotting. Wild-type levels were about 40 to 80 molecules/cell. FliK synthesized by UGA readthrough could be detected when overproduced from plasmid fliK-W271opal, and the levels indicated a probability of readthrough of 0.002 to 0.01. This value was used to estimate the cellular level of underexpressed FliK, which could partly restore function to a fliK mutant, at about 0.07 to 0.8 molecule/cell. These results suggest that FliK does not form a large structure in the cytoplasm and may function as a regulatory protein for protein export. A model for hook-length control is presented that involves feedback from the assembly point to the export apparatus.

Kinetic Analysis of the Growth Rate of the Flagellar Hook in Salmonella typhimurium by the Population Balance Method

The growth rate of flagellar hooks in Salmonella typhimurium was analyzed by computer-aided simulation of the length distributions of mutant hooks of uncontrolled length (polyhooks). The wild-type hook has a relatively well-controlled length, with an average of 55 nm and a standard deviation of 6 nm. Mutations in the fliK gene give rise to polyhooks. A histogram of the lengths of polyhooks from a fliK mutant shows a peak at 55 nm with a long monotonic tail extending out to 1 μm. To analyze the growth rate, we employed the population balance method. Regression analysis showed that the histogram could fit a combination of two theoretical curves. In the first phase of growth, the hook starts with a very fast growth rate (40 nm/min), and then the rate exponentially slows until the length reaches 55 nm. In the second phase of growth, where the hook length is over 55 nm, the hook grows at a constant rate of 8 nm/min. Second mutations in either the fliK or flhB genes, as found in pseudorevertants from fliK mutants, give rise to polyhook filaments (phf). The ratio between the numbers of hooks with and without filament was 6:4. The calculated probability of filament attachment to polyhooks was low so that the proportion of hooks that start filament growth was only 2% per minute. The lengths of polyhooks with and without filaments were measured. A histogram of hook length in phf's was the same as that for polyhooks in single-site fliK mutants, against the expectation that the distribution would shift to a shorter average. The role of FliK in hook length control is discussed.

Isolation and characterization of FliK-independent flagellation mutants from Salmonella typhimurium

A flagellum of Salmonella typhimurium and Escherichia coli consists of three structural parts, a basal body, a hook, and a filament. Because the fliK mutants produce elongated hooks, called polyhooks, lacking filament portions, the fliK gene product has been believed to be involved in both the determination of hook length and the initiation of the filament assembly. In the present study, we isolated two mutants from S. typhimurium which can form flagella even in the absence of the fliK gene product. Flagellar structures were fractionated from these suppressor mutants and inspected by electron microscopy. The suppressor mutants produced polyhook-filament complexes in the fliK mutant background, while they formed flagellar structures apparently indistinguishable from those of the wild-type strain in the fliK+ background. Genetic and sequence analyses of the suppressor mutations revealed that they are located near the 3'-end of the flhB gene, which has been believed to be involved in the early process of the basal body assembly. On the basis of these results, we discuss the mechanism of suppression of the fliK defects by the flhB mutations and propose a hypothesis on the export switching machinery of the flagellar proteins.

FlgD is a scaffolding protein needed for flagellar hook assembly in Salmonella typhimurium

FlgD is known to be absolutely required for hook assembly, yet it has not been detected in the mature flagellum. We have overproduced and purified FlgD and raised an antibody against it. By using this antibody, we have detected FlgD in substantial amounts in isolated basal bodies from flgA, flgE, flgH, flgI, flgK, and fliK mutants, in much smaller amounts in those from the wild type and flgL, fliA, fliC, fliD, and fliE mutants, and not at all in those from flgB, flgD, flgG, and flgJ mutants. In terms of the morphological assembly pathway, these results indicate that FlgD is first added to the structure when the rod is completed and is discarded when the hook, having reached its mature length, has the first of the hook-filament junction proteins, FlgK, added to its tip. Immunoelectron microscopy established that FlgD initially is located at the distal end of the rod and eventually is located at the distal end of the hook. Thus, it appears to act as a hook-capping protein to enable assembly of hook protein subunits, much as another flagellar protein, FliD, does for the flagellin subunits of the filament. However, whereas FliD is associated with the filament tip indefinitely, FlgD is only transiently associated with the hook tip; i.e., it acts as a scaffolding protein. When FlgD was added to the culture medium of a flgD mutant, cells gained motility; thus, although the hook cap is normally added endogenously, it can be added exogenously. When culture media were analyzed for the presence of hook protein, it was found only with the flgD mutant and, in smaller amounts, the fliK (polyhook) mutant. Thus, although FlgD is needed for assembly of hook protein, it is not needed for its export.