Flexible Triboelectric Nanogenerator Research Articles

Sodium Niobate Nanowires Embedded PVA-Hydrogel-Based Triboelectric Nanogenerator for Versatile Energy Harvesting and Self-Powered CO Gas Sensor.

The surging demand for sustainable energy solutions and adaptable electronic devices has led to the exploration of alternative and advanced power sources. Triboelectric Nanogenerators (TENGs) stand out as a promising technology for efficient energy harvesting, but research on fully flexible and environmental friendly TENGs still remain limited. In this study, an innovative approach is introduced utilizing an ionic-solution modified conductive hydrogel embedded with piezoelectric sodium niobate nanowires-based Triboelectric Nanogenerator (NW-TENG), offering intrinsic advantages to healthcare and wearable devices. The synthesized NW-TENG, with a 12.5 cm2 surface area, achieves peak output performance, producing ≈840V of voltage and 2.3 µC of charge transfer, respectively. The rectified energy powers up 30 LEDs and a stopwatch; while the NW-TENG efficiently charges capacitors from 1µF to 100 µF, reaching 1V within 4 to 65 s at 6Hz. Integration with prototype carbon monoxide (CO) gas sensortransform the device into a self-powered gas sensory technology. This study provides a comprehensive understanding of nanowire effects on TENG performance, offering insights for designing highly flexible and environmentally friendly TENGs, and extending applications to portable self-powered gas sensors and wearable devices.

MoS2-based charge trapping layer enabled triboelectric nanogenerator with assistance of CNN-GRU model for intelligent perception

Self-powered sensing technology and smart perception technology have broad application prospects in flexible and wearable electronics. In this work, a flexible triboelectric nanogenerator (RMP-TENG) based on a room-temperature vulcanized silicone rubber (RTV)@(Molybdenum disulfide (MoS2)/Polyvinyl chloride (PVC)) functional layer is developed using a layer-by-layer self-assembly and material doping strategy. The RTV@(MoS2/PVC) functional layer is divided into a charge-generating layer (RTV/PVC) and a charge-trapping layer (RTV/MoS2). The synergistic effect of PVC and MoS2 has improved the surface roughness and charge transfer efficiency of RMP-TENG, doubling its output performance to 1055 V and 112 μA. In order to further improve the tactile sensing accuracy of RMP-TENG, a deep learning model based on Convolutional Neural Network (CNN) and Gated Recurrent Unit (GRU) is developed. It predicts the type of contact material based on the features of tactile signals, achieving a prediction accuracy of 93.975%. Additionally, by combining mobile smart terminals, the CNN-GRU model, and RMP-TENG, a wireless access control system based on self-powered tactile sensing and intelligent material recognition is developed. Through the optimization of these experiments and algorithms, RMP-TENG has achieved real-time material recognition capabilities. This demonstrates the broad application prospects of RMP-TENG in wearable energy supply, intelligent sensing, human-computer interaction, and other areas.

A wearable flexible triboelectric nanogenerator for bio-mechanical energy harvesting and badminton monitoring

Recently, textile materials used for wearable flexible sensors have received much attention. Wearable textile based triboelectric nanogenerator (TENG) not only has unique advantages in mechanical energy harvesting, but also has application value in the direction of motion sensing. Here, we proposed a non-woven fabric triboelectric nanogenerator (NW-TENG) for mechanical energy harvesting and badminton monitoring. The non-woven fabric play the role of positive triboelectric, and the fluffy fiber structure endows NW-TENG with a sensitive response to pressure. The pressure sensing sensitivity of NW-TENG sensor can reach 1.22 V N−1 (Pressure range: 0–7 N) and 0.18 V N−1 (Pressure range: 8 N–55 N). Furthermore, the NW-TENG can be installed on the body joints of badminton players for analyzing joint movements, thereby achieving data-driven badminton training and facilitating the evaluation of training effectiveness. This research provide a new path to promote TENG to the badminton monitoring field.

In-situ welding and thermal activation enabled robust nanofibers based triboelectric nanogenerator for sustainable energy harvesting

Nanofiber-based triboelectric nanogenerators (TENGs) show great promise in energy harvesting and sensing applications. However, the poor strength and the instability of the nanofiber structures lead to the constraints on the durability and the lack of stability in the output performance. In this study, BaTiO3@PVDF-HFP nanofibers were prepared by electrospinning, in which BaTiO3 nanoparticles enhanced the charge trapping ability of the nanofibers and provided nucleation sites for β-phase growth. Subsequent solvent and annealing treatment in-situ welded the nanofibers, which greatly improved the mechanical strength and stability of the nanofiber membranes. The annealing process further thermally activated the electroactive β-phase in the PVDF-HFP, which increased the surface charge density of the nanofibers. A flexible TENG based on BaTiO3@PVDF-HFP-p nanofiber was prepared to harvest mechanical energy, which could achieve a maximum output of 482.5V and 1.9Wm-2, the voltage is more than 1.2 to 1.5 times higher compared to uncrosslinked nanofibers. The BaTiO3@PVDF-HFP-p-based TENG maintains ultra-stable Voc generation over 7000 cycles compared to the nanofibers without solvent and annealing treated. Finally, its practical application in harvesting ambient mechanical energy was demonstrated, which can harvest wind energy to power LEDs and small electronic devices such as temperature and humidity sensors.

Influence of MXene Composition on Triboelectricity of MXene-Alginate Nanocomposites.

MXenes are highly versatile and conductive 2D materials that can significantly enhance the triboelectric properties of polymer nanocomposites. Despite the growing interest in the tunable chemistry of MXenes for energy applications, the effect of their chemical composition on triboelectric power generation has yet to be thoroughly studied. Here, we investigate the impact of the chemical composition of MXenes, specifically the Ti3CNTx carbonitride vs the most studied carbide, Ti3C2Tx, on their interactions with sodium alginate biopolymer and, ultimately, the performance of a triboelectric nanogenerator (TENG) device. Our results show that adding 2 wt % of Ti3CNTx to alginate produces a synergistic effect that generates a higher triboelectric output than the Ti3C2Tx system. Spectroscopic analyses suggest that a higher oxygen and fluorine content on the surface of Ti3CNTx enhances hydrogen bonding with the alginate matrix, thereby increasing the surface charge density of the alginate oxygen atoms. This was further supported by Kelvin probe force microscopy, which revealed a more negative surface potential on Ti3CNTx-alginate, facilitating high charge transfer between the TENG electrodes. The optimized Ti3CNTx-alginate nanogenerator delivered an output of 670 V, 15 μA, and 0.28 W/m2. Additionally, we demonstrate that plasma oxidation of the MXene surface further enhances triboelectric performance. Due to the diverse surface terminations of MXene, we show that Ti3CNTx-alginate can function as either tribopositive or tribonegative material, depending on the counter-contacting material. Our findings provide a deeper understanding of how MXene composition affects their interaction with biopolymers and resulting tunable triboelectrification behavior. This opens up new avenues for developing flexible and efficient MXene-based TENG devices.

Ultra-stretchable and anti-freezing ionic conductive hydrogels as high performance strain sensors and flexible triboelectric nanogenerator in extreme environments

Conductive hydrogels have shown promising applications in a variety of portable smart wearable electronics and flexible sensors due to their high flexibility, stretchability, adjustable mechanical properties and excellent electrical conductivity. However, most of the current hydrogel-based flexible strain sensors and portable triboelectric nanogenerator (TENG) generally suffer from low stretchability/flexibility, poor mechanical properties, weak low-temperature tolerance and low power output. Herein, a multifunctional ionic conductive hydrogel (PPAVC-BA) with ultra-stretchability (∼1750%), high transparency (85%), high electrical conductivity (13.7 mS/cm), and outstanding anti-freezing properties (below −80°C without freezing). The strain sensor assembled from the PPAVC-BA hydrogel shows high sensitivity (GF=4.43) and ultra-wide sensing detection range (0%-1100%) as well as fast response time. Based on these properties, the PPAVC-BA hydrogel strain sensor can accurately recognize different joint movements of the human body as well as weak muscle beats. In addition, the PPAVC-BA hydrogel-based TENG (PPAVC-BA-TENG) exhibits excellent electrical output performance, with an open circuit voltage (Voc) of about 420 V, a short circuit current (Isc) of 23 μA, a short-circuit transfer charge (Qsc) of 112 nC and a maximum power density of 2246.03 mW/m2, which allows it to power small electronic devices. This PPAVC-BA-TENG also shows outstanding tensile performance and can output stable electrical signals at 200% strain. Impressively, the PPAVC-BA-TENG exhibits good electrical output performance even at low temperature of −50°C and high temperature of 80°C. The flexible strain sensors and stretchable TENG for high performance and multifunctionality reported in this work provide viable references in the development of motion detection, energy harvesting and self-powered electronic devices.

Machine learning-assisted novel recyclable flexible triboelectric nanogenerators for intelligent motion

In the smart era, big data analysis based on sensor units is important in intelligent motion. In this study, a dance sports and injury monitoring system (DIMS) based on a recyclable flexible triboelectric nanogenerator (RF-TENG) sensor module, a data processing hardware module, and an upper computer intelligent analysis module are developed to promote intelligent motion. The resultant RF-TENG exhibits an ultra-fast response time of 17ms, coupled with robust stability demonstrated over 4200 operational cycles, with 6% variation in output voltage. The DIMS enables immersive training by providing visual feedback on sports status and interacting with virtual games. Combined with machine learning (K-nearest neighbor), good classification results are achieved for ground-jumping techniques. In addition, it shows some potential in sports injury prediction (i.e., ankle sprains, knee hyperextension). Overall, the sensing system designed in this study has broad prospects for future applications in intelligent motion and healthcare.

Silane-modified MXene/PVA hydrogel for enhanced streaming vibration potential in high-performance flexible triboelectric nanogenerators

To meet the growing demand for flexible, self-powered, and portable electronic devices—vital for advancing soft robots, electronic skins, and energy-harvesting technologies—we've refined our approach to creating polyvinyl alcohol (PVA) modulating polyethylene glycol (PEG) to facilitate cation movement along polymer chains, significantly boosting the hydrogel's performance in triboelectric nanogenerators (PPh TENG), which is further enhanced by adding with layered Ti3C2 nanosheets, serving as ionic conductors. These nanosheets introduce an efficient electrostatic mechanism known as the streaming vibration potential (SVP), significantly augmenting the device's functionality. Moreover, we used 3-chloropropyltrimethoxysilane (CPTMS) and 1 H, 1 H, 2 H, 2 H-perfluorooctyltriethoxysilane (FOTS) to modify the surface of MXene nanosheets to fabricate Cl-MXene and F-MXene hydrogel TENGs, as named by Cl-MPPh and F-MPPh TENGs, respectively. The SVP effect is enhanced by these modified MXene nanosheets in the hydrogel, which is more substantial than unmodified MXene nanosheets. This is attributed to the higher charge density in the electric double layer formed between the MXene nanosheets and water. The Cl-MPPh and F-MPPh TENGs demonstrate open-circuit voltages of 190 V and 212 V, respectively. Our theoretical calculations show a marked increase in the distribution of electric potential. This increase occurs on both sides of the MXene nanosheets as water molecules move through them. The F-MPPh TENG exhibits exceptional sensitivity to mechanical stimuli, which holds promising potential for integration into motion sensors designed to monitor human body movements, including the bending of elbows and wrists.

Implantable heterogeneous triboelectric nanogenerator effectively prevents denervation-induced muscle atrophy

Electrical stimulation (ES) is one of the most effective methods of preventing muscle atrophy. However, current electrotherapy equipment is relatively complex and inconvenient to carry, and the daily training time needs to be scheduled. Implantable flexible triboelectric nanogenerators (TENG) can realize ES and effectively avoid the above problems. Therefore, we developed a high-performance TENG with excellent biocompatibility and implanted it subcutaneously to prevent denervation-induced muscle atrophy. Moreover, molecular dynamics (MD) analysis found that the spacing of the heterogeneous film can change its dipole, which is one of the reasons for the voltage change of heterogeneous TENG (h-TENG). In addition, in vitro experiments demonstrate that h-TENG can effectively promote much more muscle cell proliferation. Furthermore, bioinformatics analysis and gene knockout methods found that h-TENG prevents muscle atrophy by upregulating the expression of the FGF6 gene.

Flexible Triboelectric Nanogenerator for Promoting the Proliferation and Migration of Human Fibroblast Cells.

Chronic wound healing is often a prolonged process with the migration and proliferation of fibroblast cells playing crucial roles. Electrical stimulation (ES) has emerged as a promising physical therapy modality to promote these key events. In this study, we address this issue by employing a triboelectric nanogenerator (TENG) as an electrical stimulator for both drug release and the stimulation of fibroblast cells. The flexible TENG with a sandwich structure was fabricated using a PCL nanofibrous layer, Kapton, and silicon rubber. The TENG could be folded to any degree and twisted, and it could return to its original shape when the force was removed. Cultured cells received ES twice and three times daily for 8 days, with a 30 min interval between sessions. By applying current in a safe range and appropriate time (twice daily), fibroblasts demonstrate an accelerated proliferation and migration rate. These observations were confirmed through cell staining. Additionally, in vitro tests demonstrated the TENG's ability to simultaneously provide ES and release vitamin C from the patch. After 2 h, the amount of released drug increased 2 times in comparison to the control group. These findings provide support for the development of a TENG for the treatment of wounds, which underlines the promise of this new technique for developing portable electric stimulation devices.

High-performance flexible triboelectric nanogenerator based on micropatterned allicin-grafted cellulose film

Developing high-performance cellulose-based flexible triboelectric nanogenerators (TENGs) remains challenging due to the weak surface polarity of cellulose. In this work, allicin-grafted cellulose nanofiber films (Alc-CNF) containing square micropatterns on the surface are fabricated, and their successful application for bio-based TENGs with enhanced triboelectric output performance is demonstrated. Allicin was chemically grafted onto the CNFs through the utilization of 'thio-ene' click chemistry. Square micropatterns with different gaps (40, 50, 60 μm) between patterns were created on the CNF film using lithography, then casting Alc-CNF suspension and drying in cleanroom conditions. The Alc-CNF TENG, having a 50 μm gap between the patterns, showed an output power of 87 μW (387 mW/m2), 260 times larger than the pure CNF TENG and 35 times larger than the no-patterned Alc-CNF TENG. The performance is related to the higher surface polarity, electron-donating tendency, and surface roughness of the Alc-CNF film.

Triboelectric-Responsive Drug Delivery Hydrogel for Accelerating Infected Wound Healing.

Electrotherapy is of great interest in the field of tissue repair as an effective, well-tolerated, and noninvasive treatment. Triboelectric nanogenerator (TENG) has shown advantages in promoting wound healing due to its peak output characteristic and low Joule heating effect. However, it is limited in infected wound healing due to poor antimicrobial capacity. Here, a wearable triboelectric stimulator (WTS) is developed that consists of a flexible TENG (F-TENG) and a triboelectric-responsive drug delivery hydrogel (TR-DDH) for healing of bacterium-infected wounds. F-TENG can generate pulsed current to wounds by converting mechanical energy from body movements. Polypyrrole is prone to reduction and volume contraction under electrical stimulation, resulting in desorption of curcumin nanoparticles (CUR NPs) from the polypyrrole in TR-DDH. Therefore, the highly efficient and controllable release of CUR NPs can be achieved by triboelectric stimulation. According to the in vitro and in vivo experiments, WTS has the greatest antimicrobial effect and the fastest promotion of infected wound healing compared to treatment with electrical stimulation or curcumin. Finally, the safety assessment demonstrates that the WTS has excellent tissue safety for chronic wound healing. Synergistic therapy with WTS provides an efficient strategy for chronic wound healing and smart-responsive drug delivery systems.

Biodegradable and flame-retardant cellulose-based wearable triboelectric nanogenerator for mechanical energy harvesting in firefighting clothing

Integrating flexible triboelectric nanogenerators (TENGs) into firefighting clothing offers exciting opportunities for wearable portable electronics in personal protective technology. However, it is still a grand challenge to produce eco-friendly TENGs from biodegradable and low-cost natural polymers for mechanical-energy harvesting and self-powered sensing. Herein, conductive polypyrrole (PPy) and natural chitosan (CS)/phytic acid (PA) tribonegative materials were employed onto the Lycra fabric (LC) in turn to assemble the biodegradable and flame-retardant single-electrode mode LC/PPy/CS/PA TENG (abbreviated as LPCP-TENG). The resultant LPCP-TENG exhibits truly wearable breathability (1378.6 mm/s), elasticity (breaking elongation 291 %), and shape adaptivity performance that can produce an open circuit voltage of 0.3 V with 2 N contact pressure at a working frequency of 5 Hz with a limiting oxygen index of 35.2 %. Furthermore, facile monitoring for human motion of firefighters on fireground is verified by LPCP-TENG when used as self-powered flexible tactile sensor. In addition, degradation experiments have shown that waste LPCP-TENG can be fully degraded in soil within 120 days. This work broadens the applicational range of wearable TENG to reduce the environmental effects of abandoned TENG, exhibiting prosperous applications prospects in the field of wearable power source and self-powered motion detection sensor for personal protection application on fireground.

Flexible Triboelectric Nanogenerators based on Hydrogel/g-C3N4 Composites for Biomechanical Energy Harvesting and Self-Powered Sensing.

Flexible and stretchable triboelectric nanogenerators (TENGs) have been rapidly advanced owing to the demand for portable and wearable electronic devices that can work under universal or motional circumstances. While versatile materials can be applied in a TENG as dielectric materials, flexible and cost-effective electrodes are crucially important for the output performance of TENGs. Herein, we developed a poly(vinyl alcohol) (PVA) hydrogel TENG doped with a novel two-dimensional material, graphitic carbon nitride (g-C3N4), which could act as both a cost-effective flexible electrode and a positive dielectric for TENG with different morphologies. The measured peak-to-peak open-circuit voltage of the TENG reached 80 V at a dopant concentration of 2.7 wt % in single-electrode mode, which is far higher than that of the pristine PVA hydrogel TENG. As a demonstration of the application, the g-C3N4/PVA hydrogel TENG can be adopted as electronic skin to monitor the movement of the human body. Low-frequency mechanical energy-harvesting devices in different morphologies including discoid flake shape, tube shape, and spiral shape in the single-electrode mode or contact-separation mode have been designed, fabricated, and evaluated. All of these merits of the proposed hydrogel TENG after doping two-dimensional (2D) material g-C3N4 have demonstrated their promising potential for versatile applications in biomechanical energy harvesting and self-powered sensing.

Temperature-tuned enhanced performances of PVDF-based flexible triboelectric nanogenerator

Temperature-tuned enhanced performances of PVDF-based flexible triboelectric nanogenerator

Metal-free flexible triboelectric nanogenerator based on bifunctional carbon fiber for mechanical energy harvesting and human activity monitoring

Conductive electrodes in triboelectric nanogenerators (TENGs) typically use metal-based materials. However, such devices have limited flexibility and challenges in humid environments. To overcome this issue, we present a metal-free flexible TENG made from bifunctional carbon fiber paper that serves as both a conductive electrode and an efficient tribo-positive friction layer. The electrical performance of carbon fiber paper-based TENG (CFP-TENG) at 3 Hz demonstrated a peak-to-peak voltage of 109.1 V, a current of 10.8 μA, and a power density of ∼ 0.093 W/m2 at 7 MΩ external resistance. A 20 µF capacitor is also charged, and 38 light-emitting diodes (LEDs) arranged in the letter 'DGU' can be lighted. The CFP-TENG device's high flexibility allows it to sustain 12,000 repeated mechanical contact-separation cycles and fold, twist, and roll the device without degrading performance. In addition, the hydrophobic characteristic of carbon fiber ensures the improved moisture resistance of the CFP-TENG device compared to conventional copper electrodes. Furthermore, the CFP-TENG is successfully integrated into various human joints as a self-powered motion sensor for tracking real-time human activity monitoring, including finger motion detection, arm motion, walking, and running activities. A metal-free TENG based on bifunctional carbon fibers paves the way for energy- harvesting solutions and self-powered biomedical sensors.

Wearable All-Fabric Hybrid Energy Harvester to Simultaneously Harvest Radiofrequency and Triboelectric Energy.

Distributed micro-energy harvesting devices offer the flexibility, sustainability, and multi-scenario applicability that will be critical to wearable electronic products in the Internet of Things. The radiofrequency and triboelectric (RF-TE) hybrid energy harvester (HEH) concept and prototype is presented for the first time, to simultaneously capture the energy from ambient electromagnetic waves and biological motions. The proposed hybrid energy harvesting system consists of a wearable rectenna, a triboelectric nanogenerator (TENG), and a power management circuit (PMC). Among them, the all-fabric rectenna exhibits good impedance matching characteristics in the ISM frequency. The flexible TENG unit can generate a maximum power density of 0.024µWcm-2. The designed multifunctional fabric-based PMC can considerably enhance the controllability of harvested hybrid energy. Additionally, a normalizable fabric circuit board quasi surface mount technology (FCB-SMT) is proposed to integrate all modules on the same fabric substrate in one step, making the entire system superior mechanical robustness. The proposed wearable fabric-based RF-TE hybrid energy harvester is capable of successfully driving consumer electronics (such as sensors, watches, etc.). It provides a new energy solution strategy for self-powered wearable electronic devices and is anticipated to encourage the efficient utilization of renewable energy.

Switchable Power Generation in Triboelectric Nanogenerator Toward Chip-Less Wearable Power Module Applications.

A conceptual shift toward next-generation wearable electronics is driving research into self-powered electronics technologies that can be independently operated without plugging into the grid for external power feeding. Triboelectric nanogenerators (TENGs) are emerging as a key component of self-powered electronics, but a power type mismatch between supply and demand limits their direct implementation into wearable self-powered electronics. Here, a TENG with switchable power mode capability is reported where the charge flow direction is modulated over the course of slow and random mechanical stimuli, with exceptional rectification capabilities as high as ≈133, stable outputs over the cycles, and design flexibility in different platforms. Importantly, the remarkable switchable power generation with fabric counter materials illuminates a new path for the smooth integration of flexible TENGs into wearable self-powered electronics.

Janus CoMOF-SEBS Membrane for Bifunctional Dielectric Layer in Triboelectric Nanogenerators.

Considerable research has been conducted on the application of functional nano-fillers to enhance the power generation capabilities of triboelectric nanogenerators (TENGs). However, these additives often exhibit a decrease in output power at higher concentration. Here, a Janus cobalt metal-organic framework-SEBS (JCMS) membrane is reported as a dual-purpose dielectric layer capable of efficiently capturing and blocking charges for high-performance TENGs. The JCMS is produced asymmetrically through gravitational sedimentation, employing spherical CoMOFs within a diluted SEBS solution. Beyond its dual dielectric characteristics, the JCMS showcases exceptional mechanical durability, displaying notable stretchability of up to 475% and remarkable resilience when subjected to diverse mechanical pressures. Consequently, the JCMS-TENG produces a maximum peak-to-peak voltage of 936V, a current of 42.8µA, and a power density of 10.89Wm- 2 when exposed to an external force of 10N at a 5Hz frequency. This investigation highlights the potential of JCMS-TENGs with unique structures, known for their exceptional energy harvesting capabilities, mechanical strength, and flexibility. Additionally, the promising prospects of easily produced asymmetric structures is emphasized with bifunctionalities for developing efficient and flexible MOFs-based TENGs. These advancements are well-suited for self-powered wearables, rehabilitation devices, and energy harvesters.

A skin-wearable and self-powered laminated pressure sensor based on triboelectric nanogenerator for monitoring human motion

Flexible and skin-wearable triboelectric nanogenerators (TENGs) have emerged as promising candidates for self-powered tactile and pressure sensors and mechanical energy harvesters due to their compatible design and ability to operate at low frequencies. Most research has focused on improving tribo-negative materials for flexible TENGs, given the limited options for tribo-positive materials. Achieving biocompatibility while maintaining the sensitivity and capability of energy harvesting is another critical issue for wearable sensors. Here, we report a TENG-based biocompatible and self-powered pressure sensor by simple fabrication of layer-by-layer deposition methods. The Laminated Flexible-TENG comprises polytetrafluoroethylene (PTFE) and polymethyl methacrylate (PMMA) films embedded within a flexible and biocompatible polydimethylsiloxane (PDMS) matrix. A nanostructured PDMS surface obtained by oxygen plasma facilitated the sputter deposition of a layered indium tin oxide copper electrode and a tribo-positive PMMA thin layer on top. The addition of the indium tin oxide layer to copper significantly improved the quality and performance of the indium tin oxide-copper electrode. Self-powered Laminated Flexible-TENGs demonstrated impressive pressure-sensing capabilities, featuring dual sensitivity of 7.287 V/kPa for low pressure and 0.663 V/kPa for higher pressure. Moreover, the PDMS-encapsulated TENG sensor effectively traced the physiological motions, such as wrist and finger bending, and efficiently harnessed the waste energy from everyday physical activities, such as walking and jogging. The maximum peak-to-peak voltages of 18.3 and 57.4 V were recorded during these motions. Encapsulated TENGs have broad potential in wearable technology, including healthcare, human-machine interfaces, and energizing microelectronics.