Flexible Graphene Transistors Research Articles

Flexible bottom-gate graphene transistors on Parylene C substrate and the effect of current annealing.

Flexible graphene transistors built on a biocompatible Parylene C substrate would enable active circuitry to be integrated into flexible implantable biomedical devices. An annealing method to improve the performance of a flexible transistor without damaging the flexible substrate is also desirable. Here, we present a fabrication method of a flexible graphene transistor with a bottom-gate coplanar structure on a Parylene C substrate. Also, a current annealing method and its effect on the device performance have been studied. The localized heat generated by the current annealing method improves the drain current, which is attributed to the decreased contact resistance between graphene and S/D electrodes. A maximum current annealing power in the Parylene C-based graphene transistor has been extracted to provide a guideline for an appropriate current annealing. The fabricated flexible graphene transistor shows a field-effect mobility, maximum transconductance, and a Ion/Ioff ratio of 533.5 cm2/V s, 58.1 μS, and 1.76, respectively. The low temperature process and the current annealing method presented here would be useful to fabricate two-dimensional materials-based flexible electronics.

Flexible graphene transistors for recording cell action potentials

Graphene solution-gated field-effect transistors (SGFETs) are a promising platform for the recording of cell action potentials due to the intrinsic high signal amplification of graphene transistors. In addition, graphene technology fulfills important key requirements for in-vivo applications, such as biocompability, mechanical flexibility, as well as ease of high density integration. In this paper we demonstrate the fabrication of flexible arrays of graphene SGFETs on polyimide, a biocompatible polymeric substrate. We investigate the transistor’s transconductance and intrinsic electronic noise which are key parameters for the device sensitivity, confirming that the obtained values are comparable to those of rigid graphene SGFETs. Furthermore, we show that the devices do not degrade during repeated bending and the transconductance, governed by the electronic properties of graphene, is unaffected by bending. After cell culture, we demonstrate the recording of cell action potentials from cardiomyocyte-like cells with a high signal-to-noise ratio that is higher or comparable to competing state of the art technologies. Our results highlight the great capabilities of flexible graphene SGFETs in bioelectronics, providing a solid foundation for in-vivo experiments and, eventually, for graphene-based neuroprosthetics.

Gigahertz Flexible Graphene Transistors for Microwave Integrated Circuits

Flexible integrated circuits with complex functionalities are the missing link for the active development of wearable electronic devices. Here, we report a scalable approach to fabricate self-aligned graphene microwave transistors for the implementation of flexible low-noise amplifiers and frequency mixers, two fundamental building blocks of a wireless communication receiver. A devised AlOx T-gate structure is used to achieve an appreciable increase of device transconductance and a commensurate reduction of the associated parasitic resistance, thus yielding a remarkable extrinsic cutoff frequency of 32 GHz and a maximum oscillation frequency of 20 GHz; in both cases the operation frequency is an order of magnitude higher than previously reported. The two frequencies work at 22 and 13 GHz even when subjected to a strain of 2.5%. The gigahertz microwave integrated circuits demonstrated here pave the way for applications which require high flexibility and radio frequency operations.

25 GHz Embedded-Gate Graphene Transistors with High-K Dielectrics on Extremely Flexible Plastic Sheets

Despite the widespread interest in graphene electronics over the past decade, high-performance graphene field-effect transistors (GFETs) on flexible substrates have been rarely achieved, even though this atomic sheet is widely understood to have greater prospects for flexible electronic systems. In this article, we report detailed studies on the electrical and mechanical properties of vapor synthesized high-quality monolayer graphene integrated onto flexible polyimide substrates. Flexible graphene transistors with high-k dielectric afforded intrinsic gain, maximum carrier mobilities of 3900 cm(2)/V·s, and importantly, 25 GHz cutoff frequency, which is more than a factor of 2.5 times higher than prior results. Mechanical studies reveal robust transistor performance under repeated bending, down to 0.7 mm bending radius, whose tensile strain is a factor of 2-5 times higher than in prior studies. In addition, integration of functional coatings such as highly hydrophobic fluoropolymers combined with the self-passivation properties of the polyimide substrate provides water-resistant protection without compromising flexibility, which is an important advancement for the realization of future robust flexible systems based on graphene.

High-Performance, Highly Bendable MoS2 Transistors with High-K Dielectrics for Flexible Low-Power Systems

While there has been increasing studies of MoS2 and other two-dimensional (2D) semiconducting dichalcogenides on hard conventional substrates, experimental or analytical studies on flexible substrates has been very limited so far, even though these 2D crystals are understood to have greater prospects for flexible smart systems. In this article, we report detailed studies of MoS2 transistors on industrial plastic sheets. Transistor characteristics afford more than 100x improvement in the ON/OFF current ratio and 4x enhancement in mobility compared to previous flexible MoS2 devices. Mechanical studies reveal robust electronic properties down to a bending radius of 1 mm which is comparable to previous reports for flexible graphene transistors. Experimental investigation identifies that crack formation in the dielectric is the responsible failure mechanism demonstrating that the mechanical properties of the dielectric layer is critical for realizing flexible electronics that can accommodate high strain. Our uniaxial tensile tests have revealed that atomic-layer-deposited HfO2 and Al2O3 films have very similar crack onset strain. However, crack propagation is slower in HfO2 dielectric compared to Al2O3 dielectric, suggesting a subcritical fracture mechanism in the thin oxide films. Rigorous mechanics modeling provides guidance for achieving flexible MoS2 transistors that are reliable at sub-mm bending radius.

Coplanar-Gate Transparent Graphene Transistors and Inverters on Plastic

Transparent flexible graphene transistors and inverters in a coplanar-gate configuration were presented for the first time using only two materials: graphene and an ion gel gate dielectric. The novel device configuration simplifies device fabrication such that only two printing steps were required to fabricate transistors and inverters. The devices exhibited excellent device performances including low-voltage operation with a high transistor-on-current and mobility, excellent mechanical flexibility, environmental stability, and a reasonable inverting behavior upon connecting the two transistors.

Solution-processable organic dielectrics for graphene electronics

We report the fabrication, at low-temperature, of solution processed graphene transistors based on carefully engineered graphene/organic dielectric interfaces. Graphene transistors based on these interfaces show improved performance and reliability when compared with traditional SiO2 based devices. The dielectric materials investigated include Hyflon AD (Solvay), a low-k fluoropolymer, and various organic self-assembled monolayer (SAM) nanodielectrics. Both types of dielectric are solution processed and yield graphene transistors with similar operating characteristics, namely high charge carrier mobility, hysteresis free operation, negligible doping effect and improved operating stability as compared to bare SiO2 based devices. Importantly, the use of SAM nanodielectrics enables the demonstration of low operating voltage ( < |1.5| V), solution-processable and flexible graphene transistors with tunable doping characteristics through molecular engineering of the SAM’s molecular length and terminal group. The work is a significant step towards graphene microelectronics where large-volume and low-temperature processing are required.