Fischer Plots Research Articles

Facies and geochemical characteristics of the Middle-Lower Ordovician Yingshan Formation in the Tarim Basin, NW China: Implications for the high-frequency sequence stratigraphy in shallow-water carbonate platform

Shallow-water carbonates from the Yingshan Formation are important target of hydrocarbon exploration in Tarim Basin. Detailed descriptions of outcrop, core, and thin sections, isotopic composition analysis, and trace element analysis were conducted. Seven lithofacies which consists of two facies belt groups were identified and used to interpret deposition environments of Yingshan Formation: (1) peritidal carbonate, with relatively lower δ13C values from −4.2% to −1.9%, mainly represented by intertidal to supratidal facies and restricted subtidal facies and (2) open-marine subtidal carbonate, with higher δ13C values (−1.5% to −0.3%), mainly consists of shoal facies and interbank sea facies. On the basis of the lithology sets, four types of meter-scale cycle model (types A–D) were grouped into peritidal sequences and subtidal sequences. On the basis of vertical lithofacies, cycle stacking patterns, and accommodation variations in Fischer plots, two third-order depositional sequences (SQ1–SQ2) were recognized. The sequence boundary between SQ1 and SQ2 is not only a surface of a positive shift of δ13C values, but also the transitional zone of cycle stacking patterns. The sequences can be further divided into four fourth-order sequence sets: Sq1–Sq4. The lower sequences (Sq1–Sq2) are dominated by peritidal facies and characterized by a progressive decreasing in accommodation space probably indicates a longer-term fall in sea level. The upper sequences (Sq3–Sq4) are mainly dominated by subtidal facies and characterized by the accommodation space with a progressive increasement, likely indicates a rising sea level with a longer term. The facies-controlled reservoirs are mainly present in the Sq3, related to the sequence boundary between SQ1 and SQ2.

Astronomical Pacing of Middle Eocene Sea‐Level Fluctuations: Inferences From Shallow‐Water Carbonate Ramp Deposits

AbstractAstrochronologically calibrated deep‐sea records document the Cenozoic (66–0 Ma) global climatic cooling in great detail, but the magnitude of sea‐level fluctuations of the middle Eocene Warmhouse state (47.8–37.7 Ma) and the ∼40.3 Ma warming event of the Middle Eocene Climatic Optimum (MECO) is not well constrained. Here, we present a sequence stratigraphic classification of a shallow marine mixed carbonate—clastic ramp system for this time interval in Paris basin, France. Based on sedimentologic, paleogeographic and biostratigraphic data, we hypothesize that the 22 elementary sequences recognized each correspond to the long cycle of orbital eccentricity (0.405 Myr). With the exception of the MECO, the shoreline trajectory of superimposed, third‐order depositional sequences evolved in phase with the very long cycles of orbital eccentricity (2.4 Myr), suggesting significant polar ice build‐up leading to sea level lowstands during nodes of the very long eccentricity cycle. Inferred from Fischer Plot methodology, Lutetian third‐order eustasy was in the order of 5–10 m and during the MECO 30 m or more. Furthermore, the shallow‐water record implies that third order sea‐level changes were astronomically paced in the middle Eocene Warmhouse climate state, but a decoupling occurred during the transient MECO warming.

Wavelet transform coupled with Fischer plots for sequence stratigraphy: A case study in the Linxing area, Ordos Basin, China

Accurately dividing stratigraphic sequence using traditional data such as core and logging data is challenging due to the insufficient availability of paleontological fossils and rock data, particularly in Carboniferous-Permian strata of the Linxing area of Ordos Basin, dominated by lagoons, barrier islands, and tidal flat sedimentation. This drawback hinders the exploration and exploitation of hydrocarbon reservoirs. To address this issue, this study presents a combination of continuous wavelet transform (CWT) and Fischer plots, enabling the accurate identification of each level of sequence boundary and high-resolution sequence stratigraphic correlation. The optimal scale factors, 120, 60, and 20, are determined by applying different scale factors to gamma ray (GR) curves corresponding to long-term cycle, medium-term cycle, and short-term cycle divisions, respectively. The analysis of sequence characteristics of numerous core segments and the corresponding CWT results (i.e., wavelet coefficient curve and time-frequency energy spectrum) led to the identification of three main types of medium-term cycles (i.e., progradational, regressive, and aggradational) that were then applied to the entire well section of the study area. Moreover, the Fischer plots method was used to identify the long-term cycle based on the determination of medium-term cycles and the division of short-term cycles. This method provided intuitive identification of the relative changes in sea level position. Additionally, the characteristics of sea level changes were consistent with the results of the sea level analysis of rock and logging curves. Therefore, the combination of CWT and Fischer plots can effectively and comprehensively establish an isochronous stratigraphic framework for clastic rock hydrocarbon reservoirs, similar to this study.

Reconstruction of Tournaisian-Viséan tectonic and climatically induced event histories of the Mobarak carbonate platform along depositional strike in the northeastern margin of Gondwana: Constraints from high-resolution cycle and sequence stratigraphy

Cyclic successions are one of the most important types of deposits in the carbonate platform of the Mississippian (Tournaisian-Viséan) in Gondwanan and Laurussian margins. The importance of climatically induced events impact on the amplitudes and frequencies of sea-level fluctuations in Mississippian of Iran is significant because the beginning, extent, duration, and significance of periods of climatically induced events in northern margin of Gondwana are not well recognized. A high-resolution sequence architecture in integration with paleoenvironmental reconstruction and foraminiferal biozonation from the Tournaisian-early Visean carbonate successions of the Mobarak Formation in Alborz basin along depositional strike (E-W- a distance of c. 340 km) suggests a mosaic-like pattern of deposition and compartmentalization of the depositional settings (homocline ramp to distally steepened ramp). According to the recognized facies, the stacking pattern of high-frequency cycles across the platform, and major accommodation events recognized on the correlated Fischer plots, six 3rd-order sequences (DS1–DS6) were identified. Detailed analysis on high-frequency cycles representing a highly variable number of shallowing-upward cycles, types, thicknesses, and facies heterogeneity along depositional strike. A combination of the episodic tectonic events along faults interacting with autocyclic processes, and inherited topographic irregularities are suggested as the driving mechanism for the cycle development. Six stages of Mobarak carbonate platform evolution based on understand the interplay of autocyclic and allocyclic controls are recognized in a hierarchical 3rd-order sequence stratigraphic framework and a chronological order: (1) early Hastarian corresponds to post-glacial transgressive episode with progressive backstepping of facies belts of early TST of DS1 throughout the region; (2) middle to late Hastarian corresponds to a major transgressional phase of DS1 following global temperature rise superimposed on different subsidence/uplift rates with the deformation of the platform along depositional strike; (3) Hastarian–Ivorian boundary corresponds to TST of DS2 with facies heterogeneity along depositional strike related to continuation of different subsidence/uplift rates. The absence of any systematic changes in the amplitude and period of cyclicity or lowstand deposits and subaerial surfaces during this phase shows the lack of influence of mid-Tournaisian glaciation and concurrent eustatic regression in northern margin of Gondwana. (4) early to middle Ivorian coincides with the RST of DS2 and TST of DS3 showing by remarkable topographic irregularities in the basin physiography and change in the position of the depocenter axis from a E–W trend to the center; (5) late Ivorian-early Moliniacian coincides with the RST of DS3 and DS4 showing by the Late Tournaisian thermal period and eustatic rise superimposed on uplift and subaerial exposure of the western part and subsidence in the central and eastern parts of the basin; (6) Moliniacian coincides with DS5-DS6 sequences showing by change from fault-related topography to major tilted fault-block topography accompanied by eustatic sea-level fall caused indirectly by the Viséan and Serpukhovian glaciations phases.

The high-frequency sea-level change in the aftermath of the Marinoan snowball Earth: Evidence from the Doushantuo formation in the northern margin of the Yangtze Craton, South China

The rapid rise of glacioeustatic change is the most extreme paleoenvironment alteration in the aftermath of Snowball Earth. Although geologists conducted a lot of multi-subdiscipline research on this issue previously, there still exists the potential room for further discussions of the process in detail. For decades, the practice proved that the Fischer plot is a simple and robust tool to illustrate the fluctuations of accommodation patterns v.s. cycle sets or strata depth which could be interpreted as relative sea-level changes. This research simulates the Fischer plot to unravel the sea-level change in the aftermath of Marinoan glaciation by measuring the lower Ediacaran Doushantuo Formation in Shennongjia, South China. The result shows that 131 fifth-order cycles and nine third-order cycles help us propose a completed second-order cycle variation of ice melting-forced sea-level change, i.e., (1) early high-frequency and slow to rapid stepwise rising, and (2) followed by a stable decrease in the latter. In addition, the vertical sedimentary facies of the lower Doushantuo Formation display, in ascending order, (1) intertidal carbonate rock, (2) subtidal clastics with turbidite, and (3) intertidal lagoon fine clastics, indicating the process of the relative waxing and waning of sea-level. Such interpretation of the Fischer plot and the sedimentary facies’ vertical evolution is beneficial for studying the high-frequency sea-level change and paleogeographic reconstruction of post-Marinoan deglaciation.

Depositional evolution, sequence stratigraphic framework and its response to relative sea-level change, the Middle and Lower Ordovician carbonate system on outcrops, north-western margin of Tarim Basin

Middle and Lower Ordovician series carbonate platform deposits develop well in the north-western Tarim Basin, Kalpin and Bachu outcrop. An integrated analysis of the outcrop, hand specimen, thin slice and geochemical data allows for interpreting the sequence framework, depositional architecture and the response to sea-level changes. The Middle and Lower Ordovician Yingshan and Yijianfang Formations comprise 2 composite sequences (CS1 and CS2) bounded by regional or major unconformities, 5 third-order sequences (Sq1–Sq5) defined by subaerial exposure unconformities or facies changing and 13–15 fourth-order sequences classified by the outcrop depositional cycle change. Twelve microfacies and seven microfacies associations are identified using hand specimens and thin sections. The primary depositional facies include platform margin reef–bank complexes, open platform intraclast or bioclast shoal, intra-shoal and restricted platforms shoal-dolomitic or intra-clastic tidal flats. The research indicates that the carbonate platform evolved from arid and semiarid ramps, restricted platform and dolomitic tidal flat (CS1) to the open and rimmed platform margins (CS2) and eventually was drowned at the end of the Middle Ordovician. The sea-level changes have been studied using the Fischer plot method, showing two sets of long-term shallow–deep–shallow trends. Large-scale transgressions occurred at the lower parts of Sq4, with a significant negative shift of δ13C and low-energy mudstone or wackestone depositional architectures. The Fischer plot, lithofacies cycle and the geochemical indicators correlate well and are comparable with Haq's global sea-level changes. Sea-level changes dominate the sequence framework and depositional evolution, and dual factors of sea-level change and tectonic subsidence constrain local Sq3-HST. The high-frequent fluctuation of sea-level changes has a noticeable control effect on the development of fourth-order depositional cycles of carbonate deposits.

High-Frequency Sea-Level Cycle Reconstruction and Vertical Distribution of Carbonate Ramp Shoal Facies Dolomite Reservoir in Gucheng Area, East Tarim Basin

During the sedimentary period of the Ordovician Yingshan Formation, the carbonate platform of the Gucheng area in the Tarim basin was characterized by a distally steepened ramp. Relative sea-level changes exerted a strong influence on the shoal facie dolomite reservoirs of the 3rd Member of the Ordovician Yingshan Formation (the Ying 3 member), sedimented in the context of a shallow water environment on the carbonate ramp. However, previous studies that lacked high-frequency sea-level changes in the Gucheng area prevent further dolomite reservoir characterization. The current work carries out systematic sampling based on the continuous core from the upper and middle parts of the Ying 3 member in two newly drilled exploration wells (GC17 and GC601) and a series of geochemistry analyses, such as C-O isotope, Sr isotope, and rare earth elements (REE), which helps to investigate the features of the shoal facies dolomite reservoir development against high-frequency sea-level changes. With the help of Fischer plots of these two wells, high-density δ13C data (sample interval is about 0.272 m) were merged to construct a comprehensive curve, contributing to characterizing the high-frequency sea-level changes of the upper and middle parts of the Ying 3 member in the Gucheng area and validating the relationship between the pore-vug vertical distribution and high-frequency sea-level changes. Results revealed that the porosity of dolomite reservoirs increased when the high-frequency sea-level fell and decreased when it rose. Furthermore, the karst surface can be found at the top of the upward-shallowing cycle during the high-frequency sea-level falling; the pore-vug reservoirs are concentrated below the karst exposure surface, and porous spaces are more developed closer to the top of the cycle. The high frequency sea-level curve built in this study can be used as a standard for further research of regional sea-levels in the Gucheng area, and this understanding is highly practical in the prediction of shoal facies carbonate reservoir in carbonate ramp.

Depositional facies and sequence architecture of the Yijianfang Formation in the Shuntuoguole Low Uplift, Tarim Basin, NW China

In the Middle Ordovician, a ramp carbonate platform was developed in the Shuntuoguole Low Uplift, Tarim Basin. The depositional facies and sequence stratigraphy were investigated using petrographic observations and Fischer plot analyses to clarify the evolution and distribution of depositional facies within the sequence stratigraphic framework of the Yijianfang Formation. Nine types of microfacies (MF1–MF9) were identified in seven environments on a ramp: (a) peritidal, (b) lagoon, (c) low‐energy bioclastic shoal, (d) shoal, (e) sheltered proximal middle‐ramp, (f) low‐energy bioclastic shoal middle‐ramp, and (g) shoal middle‐ramp. A depositional model was established based on analyses of the depositional facies from the key wells. Fischer plots obtained based on fourth‐order cycles identified from continuous wavelet transform of gamma‐ray logging data were analysed. The results show that the changes in relative sea level, as indicated by Fischer plots, are highly consistent with the evolution of paleo‐water depths indicated by microfacies types, microfacies associations, and geochemical indicators. Four third‐order depositional sequences (SQ1–4) were identified according to variations in accommodation space. The accommodation space and its growth rate during the SQ2 transgressive period were the largest, it manifested as rapid landward migration of facies, and sudden changes in the gamma‐ray logging values at the maximum flooding surface. This feature can be easily compared across the entire region. The results of this study indicate that changes in relative sealevel in the Yijianfang Formation are consistent with the global sea‐level change curve, which suggests that sea‐level fluctuation is the main factoir controlling sequence architecture and the evolution of depositional facies.

A python code for automatic construction of Fischer plots using proxy data

Fischer plots are widely used in paleoenvironmental research as graphic representations of sea- and lake-level changes through mapping linearly corrected variation of accumulative cycle thickness over cycle number or stratum depth. Some kinds of paleoenvironmental proxy data (especially subsurface data, such as natural gamma-ray logging data), which preserve continuous cyclic signals and have been largely collected, are potential materials for constructing Fischer Plots. However, it is laborious to count the cycles preserved in these proxy data manually and map Fischer plots with these cycles. In this paper, we introduce an original open-source Python code “PyFISCHERPLOT” for constructing Fischer Plots in batches utilizing paleoenvironmental proxy data series. The principle of constructing Fischer plots based on proxy data, the data processing and usage of the PyFISCHERPLOT code and the application cases of the code are presented. The code is compared with existing methods for constructing Fischer plots.

Cyclic patterns in the Lower Ordovician Dumugol Formation, Korea: Influence of compaction on sequence-stratigraphic interpretation in mixed carbonate–shale successions

The Lower Ordovician mixed carbonate–shale Dumugol Formation of Korea was analysed to compare the stratal thickness and facies proportion of measured and decompacted successions and to assess the effect of compaction on the interpretation of cyclicity. Metre-scale cyclic units (MSUs) in the formation consist in part of outer-shelf shale, distal to intermediate mid-ramp limestone–shale couplets, and proximal mid-ramp lime mudstone facies. A total of 119 MSUs were recognised in the studied section. Thickness reduction was estimated based on petrographic evidence, including compressed to uncompressed burrows, firm- to hardground surfaces and differentially compacted laminae, and supplementary values of decompaction factors taken from the literature. Five oscillatory units in the apparent Fischer plots consist of thickening- to thinning-upward packages composed of shallowing- to deepening-upward MSUs. Similar thickness–facies relationships were observed in the lower two oscillatory units of the decompacted Fischer plots; these units are rich in shale. In contrast, a transition to an antithetic thickness–facies pattern occurs in the following units, with common occurrences of limestone facies. The different thickness–facies relationships in the measured and decompacted Dumugol successions indicate that a large portion of the major controls on the formation of sedimentary cyclicity changed from sediment accumulation rate to relative sea-level fluctuations. Such modification by compaction of the original sediment column appears to have been caused by early cementation in calcareous sediments, which resulted in differential thinning between limestone and shaly deposits. These findings reveal that diagenetic influences on sequence-stratigraphic and cyclostratigraphic interpretations have been underestimated, with consequent potential effects on associated local to regional geodynamic models, particularly for mixed carbonate–siliciclastic successions.

FischerLab: An Application for Generating Fischer Plots and Dynamic Fischer Plots from Wireline Well-Logs and Stratigraphic Data

Fischer plots are a technique that is used to graph changes in accommodation in cyclic carbonate successions. They typically depict the cumulative departure from the average cycle thickness as a function of the cycle number or stratigraphic depth. Many applications of Fischer plots focus on their construction from exposed cyclic carbonate successions. No published programs allow the direct construction of Fischer plots from digital wireline well-logs or dynamic presentations of Fischer plots. Here, we introduce a program known as FischerLab, which facilitates the generation and analysis of Fischer plots. In addition to accepting interpreted stratigraphic data input, FischerLab facilitates the interpretation of digital wireline logs for the generation of Fischer plots in cycle and depth domains, as well as in a dynamic evolving cycle and relative depth domain from an easy-to-use interface. The dynamic construction facilitates the correlation of specific stratigraphic packages to parts of the accommodation cycle while simultaneously tracking the locus of the mean subsidence vector. We demonstrate the use of FischerLab on data derived from the carbonate succession outcrops of the Al-Athrun Formation, Libya, and the Glen Rose Formation, Central Texas, USA, as well as on wireline well-log data from the Western Great Bahama Bank, the Bahamas.

Lateral facies variations in the Triassic Dachstein platform: A challenge for cyclostratigraphy

AbstractThe Triassic Dachstein platform limestone at Steinernes Meer, Salzburg, Austria, includes 611 m of limestone with 222 peritidal cycles overlain by 273 m of subtidal, non‐cyclic and weakly cyclic limestone. Cycle patterns include both shoaling and deepening upward, symmetrical, truncated, and couplets without a depth vector. Beds are laterally discontinuous, and cycle bounding surfaces are laterally variable in the studied strata. Of 558 subtidal and intertidal beds measured, 121 (21.7%) disappear laterally. An additional 73 beds (13.1%) show significant (>10%) lateral variations in thickness. Mean thickness variation is 49%. Both lateral variations and terminations appear to lack a spatial vector. Disappearances toward the inferred platform interior (west) total 10% of the beds. East, toward the platform margin, 11.6% of the beds disappear. Thickness changes occur in 6.5% of beds in each direction. The lack of lateral continuity of beds precludes a simple allocyclic forcing model and is consistent with a non‐eustatic component to stratification. Erosion of intertidal intervals is the process that can be most readily documented. Non‐uniform rates of production, transport and distribution of sediments, superposed on stratigraphic sequences driven by eustasy, probably also contributed to the complex cycle patterns recorded in the Dachstein. Such composites of autocyclic and extrabasinal factors should not be uncritically interpreted as exclusive records of orbital forcing. Lateral discontinuities and thickness variations would also produce inaccuracies in spectral analysis of thickness patterns, typically conducted in search of ‘Milankovich frequencies’, as well as in construction of Fischer plots to analyse long‐period oscillations in accommodation. Any section subjected to cycle analysis should be examined for lateral changes, to the extent permitted by the exposures, in order to produce the most complete (composite) section possible.

Depositional facies and stratal cyclicity of carbonate successions in the Yingshan and Yijianfang Group (Lower-Middle Ordovician) in Yuejin-Tuoputai Region, Tarim Basin, NW China

The Lower-Middle Ordovician Yingshan and Yijianfang Group in the Tarim Basin are overwhelmingly composed of cyclic carbonates. Based on microscopic observation and facies analysis from two borehole sections in Yuejin-Tuoputai area, two main types of facies are recognized: semi-restricted subtidal, open-marine subtidal, and these are further subdivided into six and nine lithofacies in the Yuejin and Tuoputai area, respectively. In general, these facies are vertically arranged into shallowing-upward, meter-scale cycles. These cycles are commonly composed of a thinner basal horizon reflecting abrupt deepening, and a thicker upper succession showing gradual shallowing upwards. Based on the vertical facies arrangements and changes across boundary surfaces, two types of cycle: semi-restricted subtidal and open subtidal, are further identified. The semi-restricted subtidal cycles, predominating over the middle-upper Yingshan Group and the lower Yijianfang Group, commence with algal bindstone in the bottom and are capped by pelletoid grainstone and bindstone with peloidal grains. In contrast, the open subtidal cycles, dominating the upper Yijianfang Group, are dominated by clastizoic grainstone or clastizoic Bindstone. Based on vertical lithofacies variations, cycle stacking patterns, and accommodation variations revealed by Fischer plots, nine larger scale third-order depositional sequences (Sq3-Sq11) are recognized. These sequences generally consist of a lower transgressive and an upper regressive systems tract. The transgressive tracts are dominated by thicker than-average cycles, indicating an overall accommodation increase, whereas the regressive tracts are characterized by thinner-than-average cycles, indicating an overall accommodation decrease. The sequence boundaries are characterized by transitional zones of stacked thinner-than-average cycles, rather than by a single surface. These sequences can further be grouped into lower order sequence sets: the lower and upper sequence sets. The lower sequence set, including Sq3–Sq7, is at the rising–descending cycle in Fisher Curve plots. And this indicates the accommodation space keeps steady. The upper sequence set, including Sq8–Sq11, some features can be found that these Fisher Curves of sequences flunctuate strongly in the middle-lower Yijianafang Group while keep steady in the upper part. This indicates a phenomenon, where the accommodation space varies from violent to gentle.

Late Santonian-early Campanian lake-level fluctuations in the Songliao Basin, NE China and their relationship to coeval eustatic changes

In contrast to glacio-eustasy, which is mainly controlled by the waxing and waning of continental ice sheets during icehouse climate stages, the concept of aquifer or limno-eustasy suggests that the effects of groundwater storage and release may have been the main driver of short-term (10s kyr to a few Myr) sea-level changes in the Cretaceous ice-free world. Presumably climate-controlled hydrological cycling could change the water volumes of continental reservoirs and oceans by transporting water between continents and oceans, resulting in out-of-phase relation between lake and sea levels.In the present study, we present lake-level fluctuations in Members 1 and 2 of the Nenjiang Formation (late Santonian-early Campanian) in the Songliao Basin that are indicated by basin-scale correlations of Fischer Plots based on natural gamma-ray logging data. Meanwhile, the Al/K ratios of the SK1 core indicate that changes in precipitation forced lake-level fluctuations in the basin. Compared to global sea-level changes, lake-level fluctuations show an out-of-phase relation with sea-level variations in the lacustrine phase of the basin, suggesting that climate-driven water transport between continents and oceans controlled short-term sea-level changes in the late Santonian-early Campanian. During the phase of marine-lake connectivity (basal Nenjiang Member 1), although the marine regression-driven decrease in lake-level corresponds to salinity stratification and strongly reducing water conditions, increasing precipitation in the basin implies that the hydrological cycle transported more water from the oceans toward continents. Based on the results we suggest that limno-eustasy controlled water levels in the Songliao basin in the late Santonian-early Campanian.

Depositional facies and cyclic patterns in a subtidal-dominated ramp during the Early-Middle Ordovician in the western Tarim Basin (NW China)

Due to a long-term transgression since the Early Cambrian, an extensive shallow-water carbonate platform was developed in the entire Tarim Basin (NW China). During the deposition of the Yingshan Formation (Early-Middle Ordovician), a carbonate ramp system was formed in the intrashelf basin in the Bachu-Keping area of the western basin. Four well-exposed outcrop sections were selected to investigate their depositional facies, cycles, and sequences, as well as the depositional evolution. Detailed facies analyses permit the recognition of three depositional facies associations, including peritidal, semi-restricted subtidal, and open-marine subtidal facies, and eleven types of lithofacies. These are vertically arranged into meter-scale, shallowing-upward peritidal, semi-restricted subtidal, and open-marine subtidal cycles, in the span of Milankovitch frequency bands, suggesting a dominant control of Earth’s orbital forcing on the cyclic sedimentation on the platform. On the basis of vertical facies (or lithofacies) and cycle stacking patterns, as well as accommodation changes illustrated graphically by Fischer plots at all studied sections, six third-order depositional sequences are recognized and consist of lower transgressive and upper regressive parts. In shallow depositional settings, the transgressive packages are dominated by thicker-than-average, shallow subtidal cycles, whereas the regressive parts are mainly represented by thinner-than-average, relatively shallow subtidal to peritidal cycles. In relatively deep environments, however, the transgressive and regressive successions display the opposite trends of cycle stacking patterns, i.e., thinner-than-average subtidal cycles of transgressive packages. Sequence boundaries are mainly characterized by laterally traceable, transitional zones without apparent subaerial exposure features. Good correlation of the long-term changes in accommodation space inferred from vertical facies and cycle stacking patterns with sea-level fluctuations elsewhere around the world suggests an overriding eustatic control on cycle origination, platform building-up and evolution during the Early-Middle Ordovician, although with localized influences of syndepositional faulting and depositional settings.

Depositional environments and cyclicity of the Early Ordovician carbonate ramp in the western Tarim Basin (NW China)

During the Early Ordovician, the Tarim Basin (NW China) was mainly occupied by an extensive shallow-water carbonate platform, on which a carbonate ramp system was developed in the Bachu-Keping area of the western part of the basin. Three well-exposed typical outcrop sections of the Lower Ordovician Penglaiba Formation were investigated in order to identify the depositional facies and to clarify origins of meter-scale cycles and depositional sequences, thereby the platform evolution. Thirteen lithofacies are identified and further grouped into three depositional facies (associations): peritidal, restricted and open-marine subtidal facies. These lithofacies are vertically stacked into meter-scale, shallowing-upward peritidal and subtidal cycles. The peritidal cycles are mainly distributed in the lower and uppermost parts of the Penglaiba Formation deposited in the inner-middle ramp, and commonly start with shallow subtidal to intertidal facies followed by inter- to supratidal facies. In contrast, the subtidal cycles occur throughout the formation mostly in the middle-outer ramp and are dominated by shallow to relatively deep (i.e., intermediate) subtidal facies. The dominance of asymmetrical and incomplete cycles suggests a dominant control of Earth’s orbital forcing on the cyclic deposition on the platform. On the basis of vertical facies and cycle stacking patterns, and accommodation changes illustrated by the Fischer plots from all studied sections, five third-order depositional sequences are recognized in the Penglaiba Formation. Individual sequences comprise a lower transgressive part and an upper regressive one. In shallow-water depositional environments, the transgressive packages are dominated by thicker-than-average subtidal cycles, indicating an increase in accommodation space, whereas regressive parts are mainly represented by thinner-than-average peritidal and subtidal cycles, denoting a decrease in accommodation space. In contrast, in intermediate to deep subtidal environments, transgressive and regressive packages display an opposite trend in accommodation space changes. Sequence boundaries (except the basal and top boundaries of the Penglaiba Formation) are usually represented by laterally traceable, transitional boundary zones without apparent subaerial exposure features. Good correlation of the long-term changes in accommodation space (or sea-level) inferred from vertical stacking patterns of facies and cycles suggests an overriding eustatic control on the formation of meter-scale cycles and third-order depositional sequences as well as platform evolution superimposed with local and/or regional tectonic influence during the Early Ordovician. This study would help understand the controls on the tempo-spatial facies distribution, stratal cyclicity and carbonate platform evolution in the western Tarim Basin during the Early Ordovician, facilitating prediction for favorable subsurface carbonate reservoirs and future hydrocarbon exploration and production in the Penglaiba Formation.

Pre-salt microbialites from the Campos Basin (offshore Brazil): image log facies, facies model and cyclicity in lacustrine carbonates

Abstract This study uses a borehole image log, supported by limited sidewall-core samples, and conventional wireline logs to erect facies and stratigraphic models for the Aptian pre-salt microbial carbonates (Macabu Formation (Fm)) of the southern Campos Basin, Brazil. This supports the widely held view that these reservoirs are very significant, unusual, partly microbial, and lacustrine in origin. This single-well study penetrates 220 m of microbialite facies from the pre-salt Lagoa Feia Group non-marine carbonates. Continuous borehole images, available sidewall-core data, and gamma-ray and sonic wireline logs are used to identify and characterize borehole image facies. These facies are interpreted to have formed in four lacustrine depositional environments: deep subaqueous, intermediate subaqueous, shallow subaqueous and subaerial. The borehole image facies commonly show shallowing-upward facies trends topped by emergent surfaces. Such trends are interpreted as metre-scale, high-frequency cycles that are grouped into lower order depositional sequences interpreted from the gamma-ray log. A Fischer plot of the high-frequency cycle suggests that the entire Macabu Fm is represented by a decrease in the accommodation space followed by increase in the accommodation space; consistent with this suggestion are trends in δ 18 O values from an adjacent well that indicate an initial trend of increased evaporation followed by increased freshwater inflow (lighter δ 18 O and thicker cycles).

Depositional facies and stratal cyclicity of dolomites in the Lower Qiulitag Group (Upper Cambrian) in northwestern Tarim Basin, NW China

The Upper Cambrian Lower Qiulitag Group in the Tarim Basin, NW China, is overwhelmingly composed of cyclic dolomites. Based on extensive field investigations and facies analysis from four outcrop sections in the Bachu-Keping area, northwestern Tarim Basin, four main types of facies are recognized: open-marine subtidal, restricted shallow subtidal, intertidal, and supratidal facies, and these are further subdivided into ten lithofacies. In general, these facies are vertically arranged into shallowing-upward, metre-scale cycles. These cycles are commonly composed of a thin basal horizon reflecting abrupt deepening, and a thicker upper succession showing gradual shallowing upwards. Based on the vertical facies arrangements and changes across boundary surfaces, two types of cycle: peritidal and shallow subtidal cycle, are further identified. The peritidal cycles, predominating over the lower-middle Lower Qiulitag Group, commence with shallow subtidal to lower intertidal facies and are capped by inter-supratidal facies. In contrast, the shallow subtidal cycles, dominating the upper Lower Qiulitag Group, are capped by shallow-subtidal facies. Based on vertical lithofacies variations, cycle stacking patterns, and accommodation variations revealed by Fischer plots, six larger-scale third-order depositional sequences (Sq1–Sq6) are recognized. These sequences generally consist of a lower transgressive and an upper regressive systems tract. The transgressive tracts are dominated by thicker-than-average cycles, indicating an overall accommodation increase, whereas the regressive tracts are characterized by thinner-than-average peritidal cycles, indicating an overall accommodation decrease. The sequence boundaries are characterized by transitional zones of stacked thinner-than-average cycles, rather than by a single surface. These sequences can further be grouped into lower-order sequence sets: the lower and upper sequence sets. The lower sequence set, including Sq1–Sq3, is characterized by peritidal facies-dominated sequences and a progressive decrease in accommodation space, indicating a longer-term fall in sea level. In contrast, the upper sequence set (Sq4–Sq6) is characterized by subtidal facies-dominated sequences and a progressive increase in accommodation space, indicating a longer-term rise in sea level.

Orbital forcing and sea-level changes in the Earliest Triassic of the Meishan Section, South China

The Earliest Triassic Yinkeng Formation is exposed at the well-known Meishan Section, South China, which contains the Global Stratotype of Section and Point (GSSP) for the Permian-Triassic boundary (PTB). It records centimeter-scale rhythmic alternations comprised mainly by marlstone and limestone. Seven types of couplet embedded in five types of bundles were recognized based on occurrence and thickness of the lithologic units, suggesting that their formation was controlled by cyclic processes. The various orders of cycles observed correlate well with other Early Triassic counterparts recorded in South China. Here, we present new cyclostratigraphic results based on lithologic thickness and relative carbonate content of the Yinkeng Formation. Power spectra of carbonate content show that the ratio of major wavelengths recognized throughout the formation is similar to that of the 100 kyr short eccentricity, 33 kyr obliquity, and 21 kyr precession cycles, indicating that astronomical signals are recorded in the Earliest Triassic rhythmic succession. Consistence between pronounced lithologic rhythmicity and sea-level changes obtained from Fischer plots indicates that high-frequency climatic cycles may have driven sea-level changes immediately after the PTB mass extinction. Furthermore, the 4th-order sea-level changes interpreted from the sedimentary record match well with 100 kyr short eccentricity component of carbonate content, reflecting that the 100 kyr short eccentricity-induced climate changes may have likely controlled the deposition of 4th-order sequences recognized from rhythmic successions.

U–Pb zircon age, sedimentary facies, and sequence stratigraphy of the Devonian–Carboniferous boundary, Daposhang Section, Guizhou, China

The Devonian–Carboniferous (D/C) boundary marks a major extinction event and an important evolutionary turnover in Paleozoic biotas, but understanding D/C boundary events is hampered by a lack of accurate and consistent ages. As a result, although a global stratotype section and point (GSSP) for the D/C boundary was defined in the section La Serre trench E’ (Montagne Noire, France) and accepted and ratified by the IUGS, problems arose concerning both the lithology of the La Serre section and the identification of S. sulcata. Due to these problems, in the very recent years, the ICS decided to reconsider the GSSP. The Daposhang section in Muhua, Guizhou, China, is one of the most important reference sections for the D/C boundary: it is a conformable succession across the D/C boundary that contains conodont faunas characteristic of restricted subtidal facies. A biostratigraphically well constrained tuff near the D/C boundary in the Daposhang section provides an excellent opportunity to date this important event in Paleozoic history. Sensitive high-mass resolution ion microprobe (SHRIMP) U–Pb analyses were conducted on single zircons extracted from the tuff (between beds 0 and 1, which may be temporally equivalent to the Hangenberg black shale) as well as an analysis of sedimentary facies and sequence stratigraphy across the D/C boundary in the Daposhang section. Bed 0 is below the D/C boundary, in the Upper praesulcata conodont zone, and bed 1 is directly above the D/C boundary, in the sulcata conodont zone. Zircon analyses yielded 20 concordant dates that form a cluster with a 206Pb/238U concordia age of 359.6±1.9Ma. An abundance of bioclastic packstone and wackestone and a lack of obvious high-energy sedimentary structures or evidence of reworking in layers spanning the D/C boundary suggest conformable deposition in a quiet, restricted subtidal paleoenvironment. Fifty-nine fifth-order cycles combine to depict a shallowing-upward succession (beds 029-01; highstand systems tract of a third-order sequence representing the terminal Devonian). The highstand systems tract is overlain by a deepening-upward succession (beds 0-29; maximum flooding surface and transgressive systems tract of a third-order sequence representing predominantly the basal Carboniferous) that begins at the D/C boundary. Fischer plot analysis of high-frequency cycles at the D/C boundary confirms this well developed sea-level pattern, which, together with the tuff and black shale depositional events, has potential for global correlation. On the basis of this new single-zircon SHRIMP age and previously published work on the biostratigraphy and sequence stratigraphy of the D/C transition interval, the deposition of tuff took place at approximately 359.6Ma, and the age of the D/C boundary at Daposhang, Guizhou, China, is estimated at 359.58Ma.