Field Of Engineering Research Articles

Replication in Requirements Engineering: The NLP for RE Case

Natural language processing (NLP) techniques have been widely applied in the requirements engineering (RE) field to support tasks such as classification and ambiguity detection. Despite its empirical vocation, RE research has given limited attention to replication of NLP for RE studies. Replication is hampered by several factors, including the context specificity of the studies, the heterogeneity of the tasks involving NLP, the tasks’ inherent hairiness , and, in turn, the heterogeneous reporting structure. To address these issues, we propose a new artifact, referred to as ID-Card , whose goal is to provide a structured summary of research papers emphasizing replication-relevant information. We construct the ID-Card through a structured, iterative process based on design science. In this article: (i) we report on hands-on experiences of replication; (ii) we review the state-of-the-art and extract replication-relevant information: (iii) we identify, through focus groups, challenges across two typical dimensions of replication: data annotation and tool reconstruction; and (iv) we present the concept and structure of the ID-Card to mitigate the identified challenges. This study aims to create awareness of replication in NLP for RE. We propose an ID-Card that is intended to foster study replication but can also be used in other contexts, e.g., for educational purposes.

A Bayesian optimization approach for data‐driven mixed‐integer nonlinear programming problems

AbstractThe optimization of process systems within the field of Chemical Engineering often confronts uncertainties that can exert significant influences on the performance and dependability of the obtained solutions. This research endeavors to investigate the application of Bayesian optimization in the realm of constrained mixed integer nonlinear problems. A comparative analysis was conducted, exploring different surrogate models, and evaluating diverse kernel functions and acquisition functions. Furthermore, a sampling strategy was devised to assess the enhancement achieved by the acquisition function. The findings of this article reveal the superior performance of sparse Gaussian processes in conjunction with computationally inexpensive acquisition functions, thereby highlighting their suitability for addressing mixed integer nonlinear programming problems characterized by noisy functions and stochastic behavior. Consequently, this article presents a computationally efficient approach to effectively tackle the challenges associated with data‐driven mixed integer nonlinear programming problems within the domain of Process System Engineering.

Silk fibroin increases the elasticity of alginate-gelatin hydrogels and regulates cardiac cell contractile function in cardiac bioinks

Silk fibroin (SF) is a natural protein extracted from Bombyx mori silkworm thread. From its common use in the textile industry, it emerged as a biomaterial with promising biochemical and mechanical properties for applications in the field of tissue engineering and regenerative medicine. In this study, we evaluate for the first time the effects of SF on cardiac bioink formulations containing cardiac spheroids (CSs). First, we evaluate if the SF addition plays a role in the structural and elastic properties of hydrogels containing alginate (Alg) and gelatin (Gel). Then, we test the printability and durability of bioprinted SF-containing hydrogels. Finally, we evaluate whether the addition of SF controls cell viability and function of CSs in Alg–Gel hydrogels. Our findings show that the addition of 1% (w/v) SF to Alg–Gel hydrogels makes them more elastic without affecting cell viability. However, fractional shortening (FS%) of CSs in SF–Alg–Gel hydrogels increases without affecting their contraction frequency, suggesting an improvement in contractile function in the 3D cultures. Altogether, our findings support a promising pathway to bioengineer bioinks containing SF for cardiac applications, with the ability to control mechanical and cellular features in cardiac bioinks.

Bamboo-inspired lightweight, mechanically-stable and vibration-damping structural members for engineering applications

After millions of years of natural evolution, bamboo stems have formed exquisite variable cross-section hollow multi-node structures that are lightweight, tough, and stable. Bamboo is difficult to break and damage from the roots under dynamic loads, providing an important reference for te biomimetic design of lightweight components. This paper investigates the structural characteristics and variation patterns of bamboo stems and subsequently proposes an imitation bamboo stem structure design strategy for engineering structural members, namely, imitation bamboo double-jointed columns (IDJC). We establish a macro scale finite element model to predict the mechanical properties and failure modes of the IDJC under cyclic bending loads, and validate the model using experimental and analytical methods. The simulation and experimental results show that compared with traditional double-jointed columns (DJC), the weight of the IDJC is reduced by 41.7 %. Under bending load, the compressive stress of each section is approximately equal, reducing stress concentration, and increasing bending resistance. The strength to weight ratio of IDJC is 1.96 times that of DJC, indicating lightweight and high-strength characteristics. The stiffness degradation, energy dissipation, and damping and vibration reduction performance of the IDJC were also evaluated. The results showed that compared with the DJC, the stiffness degradation rate of the IDJC decreased by 6.87 times, the energy dissipation rate increased by 1.07 times, and the damping and vibration reduction performance improved by 48.40 %, reflecting a high stability and robust vibration reduction performance. The results demonstrate the potential application of biomimetic structures for the development and design of resource-rich, low-carbon, and sustainable bamboo for bamboo engineering members with excellent performance and functionality. Biomimetic structures have great potential in replacing nonrenewable structural materials in the fields of civil engineering and transportation.

Unveiling Effective CSCL Constructs for STEM Education in Malaysia and Indonesia

The acquisition of knowledge and skills in the fields of Science, Technology, Engineering, and Mathematics (STEM) plays a crucial role in fostering the development of future innovators. These subjects are critical for creating future thinkers. Additionally, it is important to note that there are a lot of job openings in the STEM fields, and this trend is expected to keep growing. However, students don’t seem to be as motivated to study in STEM fields or work in STEM fields. One teaching method that is becoming more popular is computer-supported collaborative learning (CSCL). This is because it can have a big effect on how people learn, especially in STEM subjects. It is very important to set up a CSCL learning environment for STEM schooling right away. However, that there isn’t a good framework and there aren’t many widely used design methods in this area. Without a question, there is a strong need to learn more about design methodologies in the areas of collaborative and technology-enhanced learning to come up with simple methods for CSCL. Because of this, the goal of this study is to investigate the conceptual parts of CSCL methods in STEM education. This will be used to make CSCL educational methods that are good especially for STEM education. STEM academics in Malaysia and Indonesia were surveyed using questionnaires to find the most important parts of CSCL strategies in STEM education, and the results were analysed using the Fuzzy Delphi Method. The results give us a list of CSCL settings used in schools, which can be used as a guide for creating and using CSCL strategies in STEM education.

Structural insight into piezo-solvatochromism of Reichardt's dye.

To date, accurate modelling of the solvation process is challenging, often over-simplifying the solvent-solute interactions. The interplay between the molecular arrangement associated with the solvation process and crystal nucleation has been investigated by analysis of the piezo-solvatochromic behaviour of Reichardt's dye, ET(1), in methanol, ethanol and acetone under high pressure. High-pressure single-crystal X-ray diffraction and UV-Vis spectroscopy reveal the impact of solute-solvent interactions on the optical properties of ET(1). The study underscores the intricate relationship between solvent properties, molecular conformation and crystal packing. The connection between liquid and solid phases emphasizes the capabilities of high-pressure methods for expanding the field of crystal engineering. The high-pressure environment allowed the determination of the crystal structures reported here that are built from organic molecules fourfold solvated with ethanol or methanol: ET(1)·4CH3OH and ET(1)·4C2H5OH·H2O. The observed piezo-solvatochromic effects highlight the potential of ET(1) in nonlinear optoelectronics and expand the application of solvatochromic chemical indicators to pressure sensors.

Application and Development of Electrospun Nanofiber Scaffolds for Bone Tissue Engineering.

Nanofiber scaffolds have gained significant attention in the field of bone tissue engineering. Electrospinning, a straightforward and efficient technique for producing nanofibers, has been extensively researched. When used in bone tissue engineering scaffolds, electrospun nanofibers with suitable surface properties promote new bone tissue growth and enhance cell adhesion. Recent advancements in electrospinning technology have provided innovative approaches for scaffold fabrication in bone tissue engineering. This review comprehensively examines the utilization of electrospun nanofibers in bone tissue engineering scaffolds and evaluates the relevant literature. The review begins by presenting the fundamental principles and methodologies of electrospinning. It then discusses various materials used in the production of electrospun nanofiber scaffolds for bone tissue engineering, including natural and synthetic polymers, as well as certain inorganic materials. The challenges associated with these materials are also described. The review focuses on novel electrospinning techniques for scaffold construction in bone tissue engineering, such as multilayer nanofibers, multifluid electrospinning, and the integration of electrospinning with other methods. Recent advancements in electrospinning technology have enabled the fabrication of precisely aligned nanofiber scaffolds with nanoscale architectures. These innovative methods also facilitate the fabrication of biomimetic structures, wherein bioactive substances can be incorporated and released in a controlled manner for drug delivery purposes. Moreover, they address issues encountered with traditional electrospun nanofibers, such as mechanical characteristics and biocompatibility. Consequently, the development and implementation of novel electrospinning technologies have revolutionized scaffold fabrication for bone tissue engineering.

Research on image restoration of [formula omitted] porous foam ceramics media using Transformer architecture

Pore structure images of foam ceramics play a crucial role in the field of refractory materials science and engineering, facilitating the observation and analysis of the material’s pore structure and unique characteristics. However, traditional image restoration techniques have limitations in handling background noise, complex texture restoration, deformation, and dislocation correction, as well as automation and intelligence aspects in restoring material pore structure images. The latest Transformer architecture has shown significant potential in image processing, particularly in image restoration research tasks. Nevertheless, its application in restoring pore structure images of materials remains unexplored. This paper aims to address this gap by focusing on the image restoration of foam ceramic pore structure images using a Transformer-based algorithm for super-resolution (SR) processing. Experimental comparisons with state-of-the-art methods demonstrate a remarkable improvement in Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity (SSIM), underscoring the effectiveness of the proposed approach.

Virtual Reality Sebagai Media Pembelajaran Teknik Kendaraan Ringan Otomotif Dalam Era Pendidikan Digital

During the aftermath of the Covid-19 pandemic, educational establishments encounter difficulties in providing comprehensive learning experiences due to the unpredictable circumstances caused by the pandemic. Hence, it becomes crucial for these institutions to prioritize the adoption of digitalized education that allows for accessibility at any time and from any location. However, the field of light vehicle engineering faces its own set of challenges when it comes to delivering intricate materials, primarily due to the size and intricacy of the learning resources. To tackle this issue, a novel approach has been introduced in the form of Virtual Reality (VR)-based learning methods, which prove to be invaluable tools in enhancing comprehension of the subject matter.

Modular CRISPR/Cas12a synergistic activation platform for detection and logic operations.

The revolutionary technology of CRISPR/Cas has reshaped the landscape of molecular biology and molecular engineering. This tool is of interest to researchers in multiple fields, including molecular diagnostics, molecular biochemistry circuits, and information storage. As CRISPR/Cas spreads to more niche areas, new application scenarios and requirements emerge. Developing programmability and compatibility of CRISPR/Cas becomes a critical issue in the new phase. Here, we report a redundancy-based modular CRISPR/Cas12a synergistic activation platform (MCSAP). The position, length, and concentration of the redundancy in the split DNA activators can finely regulate the activity of Cas12a. With the redundant structure as an interface, MCSAP serves as a modular plug-in to seamlessly integrate with the upstream molecular network. MCSAP successfully performs three different tasks: nucleic acid detection, enzyme detection, and logic operation. MCSAP can work as an effector for different molecular networks because of its compatibility and programmability. Our platform provides powerful yet easy-to-use tools and strategies for the fields of DNA nanotechnology, molecular engineering, and molecular biology.

Optical properties of a fs laser-created sphere inside a CYTOP fiber by Mueller polarimetry.

Optical elements embedded in an optical fiber can be used to shape and modulate the light transmitted within. We consistently observe, via Mueller polarimetry, that the optical properties of a femtosecond (fs) laser-created spherical cavity within a perfluorinated fiber exhibit predictable patterns. Specifically, linear birefringence is always induced at the periphery of the cavity, with its value showing a bell-shape distribution. The peak value of LB showed an increase correlating with the laser fluence and power, but its FWHM remains unchanged. Furthermore, it is important to highlight that when the cavity is disrupted, forming a channel to the fiber's surface, a negative LB is observed at the cavity's periphery, with a value reaching up to -0.4 rad. These optical phenomena may pique the interest of engineering and technical fields, potentially inspiring innovative approaches in optical fiber technology and its associated applications.

Introduction to the Special Thematic Issue "Virtual Reality and Eye Tracking".

Technological advancements have made it possible to integrate eye tracking in virtual reality (VR) and augmented reality (AR). Many new VR/AR headsets already include eye tracking as a standard feature. While its application previously has been mostly limited to research, we now see installations of eye tracking into consumer level VR products in entertainment, training, and therapy. The combination of eye tracking and VR creates new opportunities for end users, creators, and researchers alike: The high level of immersion – while shielded from visual distractions of the physical environment – leads to natural behavior inside the virtual environment. This enables researchers to study how humans perceive and interact with three-dimensional environments in experimentally controlled, ecologically valid settings. Simultaneously, eye tracking in VR poses new challenges to gaze analyses and requires the establishment of new tools and best practices in gaze interaction and psychological research from controlling influence factors, such as simulator sickness, to adaptations of algorithms in various situations. This thematic special issue introduces and discusses novel applications, challenges and possibilities of eye tracking and gaze interaction in VR from an interdisciplinary perspective, including contributions from the fields of psychology, human-computer interaction, human factors, engineering, neuroscience, and education. It addresses a variety of issues and topics, such as practical guidelines for VR-based eye tracking technologies, exploring new research avenues, evaluation of gaze-based assessments, and training interventions.

Dynamics of bistable composite plates

Nonlinear asymmetric bi-stable composite laminates, characterized by multistable nature and rich dynamics, have seen increased application potential recently. This has necessitated a detailed dynamical analysis of bistable laminates. In this manuscript, the nonlinear behaviour of asymmetric [0n/90n] bistable laminates with free–free boundary conditions is investigated through simulations and experimental observations. A refined 17 degrees of freedom (dofs) analytical model is developed, fusing Raleigh–Ritz with Hamilton’s principle to obtain the governing nonlinear equations of motion. A nonlinear finite element (FE) model is also developed using ABAQUS®. Experiments are conducted by clamping the midpoint of the plate with a shaker and then exciting it. The composite laminate shows many intricate dynamics, such as sub-harmonic and super-harmonic oscillations, intra-well oscillation (periodic and chaotic), and inter-well snap-through (periodic and chaotic snap-through) prominently. The primary focus of this paper is to highlight the potential of bistable laminates by elucidating the existence of large-amplitude vibrations over a broad frequency range under different input and system parameters. Further, it has been observed that attached mass plays a significant role in modifying the response bandwidth for cross-well oscillation for a given excitation frequency and amplitude. Hence fine-tuning of masses can excite different nonlinear dynamic characteristics of the laminate, making it applicable in different engineering fields.

Enhancing volumetric muscle loss (VML) recovery in a rat model using super durable hydrogels derived from bacteria

Bacteria can be programmed to deliver natural materials with defined biological and mechanical properties for controlling cell growth and differentiation. Here, we present an elastic, resilient and bioactive polysaccharide derived from the extracellular matrix of Pantoea sp. BCCS 001. Specifically, it was methacrylated to generate a new photo crosslinkable hydrogel that we coined Pantoan Methacrylate or put simply PAMA. We have used it for the first time as a tissue engineering hydrogel to treat VML injuries in rats. The crosslinked PAMA hydrogel was super elastic with a recovery nearing 100 %, while mimicking the mechanical stiffness of native muscle. After inclusion of thiolated gelatin via a Michaelis reaction with acrylate groups on PAMA we could also guide muscle progenitor cells into fused and aligned tubes – something reminiscent of mature muscle cells. These results were complemented by sarcomeric alpha-actinin immunostaining studies. Importantly, the implanted hydrogels exhibited almost 2-fold more muscle formation and 50 % less fibrous tissue formation compared to untreated rat groups. In vivo inflammation and toxicity assays likewise gave rise to positive results confirming the biocompatibility of this new biomaterial system. Overall, our results demonstrate that programmable polysaccharides derived from bacteria can be used to further advance the field of tissue engineering. In greater detail, they could in the foreseeable future be used in practical therapies against VML.

Recent Advances in Biomaterial Design for Bone Regenerative Therapy: A Mini Review

Abstract: Longevity has been associated with morbidity and an increase in age-related illnesses, linked to tissue degeneration and gradual loss of biological functions. Bone is an important organ that gradually degenerates with increasing lifespan. The remodeling phase plays a huge role in maintaining the ability of bone to regenerate and maintain its stability and function throughout life. Hence, bone health represents one of the major challenges to elderly citizens due to the increase of injury associated with bone degeneration, such as fragility and risks of fractures. In the virtue of improving the regenerative function of bone tissues, a specialized field of bone tissue engineering (BTE) has been introduced to improve the current strategies in treating bone degenerative disorders. Most of the research performed in BTE focuses on the optimization of key components to generate new bone formation, including the scaffold. A scaffold plays a significant role in establishing the structural form that interconnects major elements of the tissue engineering triad. To date, many types of biomaterials have been explored in BTE, ranging from natural and synthetic materials to nanocomposites. However, ideal scaffolds that display excellent biocompatibility and mechanical properties, approved for clinical practices are yet available. This paper aims to describe the up-to-date advancements in scaffold for new bone generation, highlighting the essential elements and strategies in selecting suitable biomaterials for bone repair.

Computational Protein Design - Where it goes?

Proteins have been playing a critical role in the regulation of diverse biological processes related to human life. With the increasing demand, functional proteins are sparse in this immense sequence space. Therefore, protein design has become an important task in various fields, including medicine, food, energy, materials, etc. Directed evolution has recently led to significant achievements. Molecular modification of proteins through directed evolution technology has significantly advanced the fields of enzyme engineering, metabolic engineering, medicine, and beyond. However, it is impossible to identify desirable sequences from a large number of synthetic sequences alone. As a result, computational methods, including data-driven machine learning and physics-based molecular modeling, have been introduced to protein engineering to produce more functional proteins. This review focuses on recent advances in computational protein design, highlighting the applicability of different approaches as well as their limitations.

Valorisation of food waste into bio-based polyurethane rigid foams: From experimental investigation to techno-economic analysis

Food waste (FW) constitutes a significant portion of municipal solid waste and thus requires proper treatment. A ‘waste-to-wealth’ concept, in this case, urges the valorisation of FW to produce value-added products, given that such waste contains significant quantities of diverse nutrients. While most of these efforts have been focused on the recovery of carbohydrates, this paper introduces an FW biorefinery scheme to valorise FW lipids (FWLs) into bio-based polyols for polyurethane rigid foams (PURF). Considering economic viability, cost-effective dosages of enzymes for FW hydrolysis were first investigated. Subsequently, the obtained FWLs were converted into bio-based polyols through stepwise epoxidation and oxirane ring-opening. Characterisation results showed that FW hydrolysis aided the development of FWL-derived polyols into PURF. Moreover, the obtained PURF exhibited excellent properties that are suitable for thermal insulation applications in the fields of civil engineering and appliances. A further techno-economic analysis demonstrated a promising profitability of valorising FW into PURF. Proven as material-intensive, critical cost drivers of the proposed valorisation scheme mainly included the price of the PURF and the chemicals required for the synthesis. The FW processing rate also significantly influenced the economic viability. By providing a successful valorisation pathway from FW to PURF and highlighting vital economic variables, this work aims to provide insights to promote the sustainable development of FW biorefineries and relevant bio-based polymer industries.

In situ XAFS-XRD study of the Zr-Y2O3 interaction at extra-high temperatures.

The in situ measurement technique for a metal/metal-oxide mixture at extra-high temperature above 2000 K has been desired in the field of nuclear safety engineering. In the present study, we succeeded in simultaneous XAFS-XRD measurements of the Zr oxidation [Zr + O → Zr(O) + ZrO2] up to 1952 K and ZrO2-Y2O3 reaction from 1952 to 2519 K. The chemical shift during Zr oxidation was observed in the absorption spectra around the Zr K-edge, and the interatomic cation-cation and cation-oxygen distances obtained by the fitting analysis of EXAFS during the Y2O3-ZrO2 reaction are explained. Also, the temperature dependency of the anharmonic effect was investigated by comparing the fitted second- and third-order cumulants with the theoretical ones in which the Morse potential was applied as an interatomic potential, giving a good explanation about the local structure dynamics. Finally, the applicability of the developed system to investigation of nuclear fuel materials, such as UO2-Zr, is discussed.

Взаимосвязь окружной скорости и потерь энергии в проточной части центростремительной турбины с частичным облопачиванием рабочего колеса

Low-consumption turbomachines are devices that play an important role in the drive of various units in the field of shipbuilding, aircraft engineering and other branches of heavy engineering. They have some advantages over a high-average power turbine. The largest number of low-consumption turbomachines are made partial, i.e. with partial intake. The principle of a turbine with partial flapping of the impeller is considered as one of the types of partial turbomachines. The influence of the main velocity characteristic of the turbine stage on the loss of kinetic energy in the stage is investigated. The simulation of gas dynamic processes occurring in the turbine stage was carried out using the ANSYS Workbench software package. With the help of this complex, a three-dimensional geometric model of the turbine stage with varying degrees of impeller damping was created. By applying the finite element method, a computational grid, a computational model are generated, and boundary conditions of a numerical experiment are set. The result of the numerical experiment is graphs of the dependence of kinetic energy loss on the circumferential velocity (speed characteristics of the turbine stage). This dependence can be represented not only graphically, but also with the help of mathematical apparatus. An example of such an apparatus is the polynomial dependence. The considered mathematical design can be used in order to optimize mathematical models of gas flow in the flow part of a low-flow turbine. Cubic two-parameter polynomials of kinetic energy losses in the flow part of the nozzle and impeller are obtained, and an assessment of its applicability in the current mathematical model is given.

A Conceptual Study of Wind Load With Different Types of Lateral Load Resisting Methods in 15-Storey Structure

Abstract: In order to strengthen rigidity and control the base deflection of a high-rise structure, stabilizers and trusses are typically used. A stabilizing layer on the building's roof efficiently fortifies the structure. Lateral stiffness is increased by each succeeding stabilizer layer, albeit less so than by the preceding stabilizer layer. The essential components in multi-storey buildings that can withstand shear forces are the shear walls. More efficient shear walls are required as building code requirements rise and tall structures and skyscrapers get taller. The ductility, energy dissipation capacity, and deformation capacity of conventional reinforced concrete shear walls are limited. In the field of structural engineering, a damper in a building is a device intended to lessen the impact of dynamic forces like seismic vibrations or oscillations caused by wind. These devices are necessary in tall or flexible constructions where excessive movement may cause structural damage or cause discomfort for the residents. In this research, we prepare four different cases of 15-storey structure. All modeling work performed in ETABS 2016. Material properties use concrete grade M-40 and steel grade Fe375 and Fe250. One case has shear walls on corners, second case have FVD damper on corners and last case have outrigger on corners. For design wind speed data use code IS: 875-(2015).