Field-use Conditions Research Articles

Reliability of Microinverters for Photovoltaic Systems: High-Temperature Accelerated Testing with Fixed and Cyclic Power Stresses

This paper presents an extended, accelerated reliability evaluation of forty microinverters, module-level power electronic (MLPE) units for photovoltaic (PV) modules. The forty microinverters were stressed at two static temperatures (65 °C and 75 °C) with two input power profiles (fixed and cyclic power). These power profiles were employed to replicate field-use conditions closely. The accelerated testing was performed for an extended duration (over a period of 15,000 h) to determine the acceleration factor and estimate the service life of microinverters in field-use conditions. Electrical performance and thermal data were continuously monitored during the experiment for all the microinverters. The accelerated stress testing had no failures even after 15,000 h of operation. Using the Arrhenius life-stress model along with average field-measured temperature and military handbook-based analysis, it was estimated that the microinverters should be able to survive for 24–48 years during their service life in field conditions, with a reliability of 74%, having a lower one-sided confidence bound of 95%, obtained using the classical success run approach. Moreover, the lifetime of microinverters was statistically analyzed using a Weibull distribution model. Weibull slope factors were used to estimate a range of characteristic lifetime periods and the reliability of the microinverters with a 95% lower one-sided confidence limit, demonstrating a similar or even exceeding the lifetime of the associated PV modules of 25 years.

The efficacy of earplugs at a major hazard facility.

At a major hazard facility, cases of occupational noise-induced hearing loss have occurred despite the use of hearing protection devices. Preliminary measurements of personal attenuation ratings (PAR) suggested that earplugs may not achieve the attenuation implied by their Australian SLC80 Class designation in field-use conditions. We examined the relationship between PAR and the SLC80 classification for earplugs, as a good understanding of the attenuation provided by earplugs under normal field-use conditions, rather than in laboratory settings, is vital to their effective use as a control measure for noise exposure. A cross-sectional study was performed with 65 volunteers. Participants were recruited from Operations and Maintenance Technicians at the major hazard facility. The participants had their PARs checked with different earplug types using the 3M™ E-A-Rfit™ system. We examined the PARs measured and also assigned a 'pass' or 'fail' rating depending on whether the earplug achieved 22dB attenuation. 22dB attenuation for 80% of users is the minimum to meet the definition for Australian SLC80 Class 4 hearing protection. None of the earplug types achieved 22dB attenuation for 80% of users when tested in field-use conditions. There were statistically significant differences in the frequency of achieving a 'Pass', and in PAR, depending on earplug type. Roll-down foam earplugs may provide superior attenuation compared to pre-moulded earplugs. Earplugs are unlikely to achieve the attenuation found in laboratory conditions during field-use. Personalised selection of hearing protection devices based on fit-testing results should be encouraged.

Field efficacy and safety of an oral formulation of the novel combination anthelmintic, derquantel-abamectin, in sheep in New Zealand

AIM: To evaluate the efficacy and safety of the novel anthelmintic combination, derquantel-abamectin, against gastrointestinal nematode populations in sheep, under field-use conditions. METHODS: Controlled faecal egg count reduction tests (FECRT) were conducted in New Zealand in 14 trials, covering a range of geographic locations, farming enterprises, breeds, nematode populations, and anthelmintic-resistance profiles. Enrolled animals were naturally infected with mixed populations of gastrointestinal nematodes. All trials included a group treated with derquantel-abamectin, and a negative control group. Nine trials included additional groups each treated with a single- or dual-active oral reference anthelmintic, selected from albendazole, levamisole, albendazole-levamisole, ivermectin, abamectin and moxidectin. A total of 838 animals were enrolled across all trials, and were randomly allocated to treatment groups within blocks defined by faecal nematode egg counts (FEC) pretreatment. On Day 0 derquantel-abamectin was administered orally at 1 ml/5 kg bodyweight (2 mg/kg derquantel, 0.2 mg/kg abamectin), and each reference anthelmintic was given at the recommended label dose. Faecal samples were collected on Day 14 (± 1 day), to determine the percentage reduction in mean FEC for each anthelmintic tested. Larval differentiation was also performed post-treatment, to estimate efficacy at the genus level. Animals were weighed on or before Day 0, and on Day 14 (± 1 day) in 13 trials. RESULTS: The efficacy of derquantel-abamectin against mixed strongyle populations was ≥99.2%, based on the percentage reduction in geometric mean FEC. Nematodirus sp. was present in six trials at a level sufficient for efficacy calculations to be conducted; in all cases, the efficacy of derquantel-abamectin was 100%. In those trials where the efficacy of at least one reference anthelmintic was <95% against strongyles and/or Nematodirus sp., derquantel-abamectin was 100% effective. In five trials, the mean gain in bodyweight was significantly greater in the derquantel-abamectin group than the negative controls. CONCLUSIONS AND CLINICAL RELEVANCE: When administered orally at 1 ml/5 kg bodyweight, derquantel-abamectin is highly effective for the treatment of gastrointestinal nematodes in sheep, including populations of strongyles and Nematodirus sp. with resistance to one or more single- or dualactive anthelmintics. Derquantel-abamectin presents sheep producers with a unique opportunity to introduce a new class of anthelmintic to their nematode control programmes, with the added benefits offered by a combination anthelmintic.

Thermal Aging Reliability of Package-Level Polymer Optical Waveguides

Polymer optical waveguides are viewed as a potential interconnect solution in board-level optoelectronic systems. In this paper, the optical loss changes in siloxane polymer waveguides during thermal aging conditions are studied for the wavelengths of 850 and 1310 nm. The optical loss in waveguides during intended operation and temperature exposure can increase due to factors such as oxidation of waveguides, increased absorption, and scattering. In addition to these inherent changes in the optical properties of the waveguides, physical failures such as delamination and cracking of waveguides will also increase the optical loss. This paper focuses on the first set of parameters that affects the optical loss and as a first step; the optical absorption of the polymer material is characterized through spectroscopy experiments. The thermal-aging dependent optical loss is determined for waveguide samples at several different accelerated temperature conditions. The temperature contours in a polymer waveguide with an embedded laser are determined from experiments as well as finite-element modeling. Using experimental data, analytical models have been developed that relate the optical loss with temperature and time, and provide a practical way of determining the reliability of the optical waveguides during field-use conditions.

Microstructure evolution based acceleration factor determination for SnAgCu solder joints during thermal cycling

The reliability of lead-free solder used in electronic packages during field-use conditions has traditionally been determined using accelerated thermal cycling (ATC) combined with a Norris-Landzberg type acceleration factor. Limited amount of work exists in quantifying the microstructure evolution of lead-free solder during thermal cycling especially during long-term thermal excursions. A phase coarsening based microstructure evolution has been used in the present work to determine the acceleration factor during thermal cycling. Two different plastic ball grid array (PBGA) packages with different sizes and two different lead-free solder alloys, Sn4.0Ag0.5Cu and Sn3.0Ag0.5Cu, were chosen for the study. The acceleration factor can be determined and hence the package can be qualified for field-use conditions in about the same time duration it takes to perform the ATC test.

Impact of cypermethrin on stream fish populations under field-use in biotech-soybean production

The impact of biotech-soybean technology on freshwater ecosystems is being evaluated in the Rolling Pampas region, Argentina. The effect of cypermethrin, the main soybean insecticide, on low-order temperate-stream fish populations was investigated for two consecutive crop cycles under field-use conditions in biotech-soybean production. Cypermethrin was unable to induce mortality or behavioral effects on any of the fish species resident in a first-order stream across a crop field (pulsed acute exposure scenario) sprayed according to conventional practices. No spatially or temporally dependent effects were observed on population parameters (size-class structure, abundance, survival, sex and immature/mature ratio, condition factor) of resident or caged Cnesterodon decemmaculatus after spraying or rainfall events, not even one year after, at the beginning of the next crop cycle. Although cypermethrin was "very highly toxic" to C. decemmaculatus in laboratory water (96h-LC(50)=0.43microg/l), its toxicity was reduced in filtered (78%) and unfiltered (92%) stream water. Changes in LC(50) values were mainly correlated with the OC content of each water fraction (r(2)=0.99; p<0.01; n=9), showing that both DOC and TOC contributed proportionally to toxicity reduction. Protective effects of stream water (12-fold reduction LC(50) values) explained the lack of effects on fish populations in the field, despite cypermethrin water concentrations after spraying reached values comparable with the 96h-LC(50). Therefore, cypermethrin under field-use conditions in transgenic-soybean production represents a low risk of acute exposure for fish populations inhabiting low-order temperate-streams rich in TOC. The relationship between LC(50) and TOC could be a convenient way to improve risk estimation based on laboratory toxicity testing.

Voltage-time and voltage-number characteristics of insulation elements with large scale oil-immersed transformers under field-use conditions

In order to attain reduction in insulation test voltages, voltage-time (V-t) characteristics for ac voltage and voltage-number (V-N) characteristics for lightning impulse voltage were experimentally investigated on the turn-to-turn insulation model, coil-to-coil insulation model and barrier-oil-duct insulation model of core- and shell-type transformers under non-standard of field-use conditions. The conditions used for experiments on insulation characteristics in view of field-use consisted of "clean oil" and "hot oil" as the conditions for insulating oil, "trapezoidal waves", "alternate applications of positive and negative voltages", and "steep front waves" as the conditions for applied voltages, and "low dielectric constant pressboards" as an insulating object in experiments. Although the measured V-t and V-N characteristics varied depending on the conditions, the total evaluation in terms of insulation coordination showed that results under standard conditions were satisfactory in almost all the cases and some cautionary points in a few cases were recognized