Tensile Stress Field Research Articles

Structure and Evolution of Multi-Trend Faults in BZ19-6 Buried Hill of the Bohai Bay Basin, Eastern China

Defining the structure and evolution of multi-trend faults is critical for analyzing the accumulation of hydrocarbons in buried hills. Based on high-resolution seismic and drilling data, the structural characteristics and evolutionary mechanism of multi-trend faults were investigated in detail through the structural analysis theory and quantitative calculations of fault activity, allowing us to determine the implication that fault evolution exerts on hydrocarbon accumulation in the BZ19-6 buried hill. There are four kinds of strike faults developed on the buried hill: SN-, NNE-, NE–ENE-, and nearly EW-trending, which experienced the Mesozoic Indosinian, Yanshan, and Cenozoic Himalayan tectonic movements. During the Indosinian, the BZ19-6 was in a SN-oriented compressional setting, with active faults composed of SN-trending strike-slip faults (west branch of the Tanlu fault zone) and near EW-trending thrust faults (Zhang-peng fault zone). During the Yanshanian, the NNE-trending normal faults were formed under the WNW–ESE tensile stress field. Since the Himalayan period, the BZ19-6 buried hill has evolved into the rifting stage. In rifting stage Ⅰ, all of the multi-trend pre-existing faults were reactivated, and the EW-trending thrust faults became normal faults due to negative inversion. In rifting stage II, a large number of NE–ENE-trending normal faults were newly formed in the NW–SE-oriented extensional setting, which made the structure pattern more complicated. In rifting stage III, the buried hill entered the post-rift stage, with only part of the NNE- and NE–ENE-trending faults continuously active. Multi-trend faults are the result of the combination of various multi-phase stress fields and pre-existing structures, which have great influence on the formation of tectonic fractures and then control the distribution of high-quality reservoirs in buried hills. The fractures controlled by the NNE- and EW-trending faults have higher density and scale, and fractures controlled by NE–ENE trending faults have stronger connectivity and effectiveness. The superposition of multi-trend faults is the favorable distribution of high-quality reservoirs and the favorable accumulation area of hydrocarbon.

On the evolution of β1/β′ coupled-structures in Mg–Y–Nd alloys: A simulation study

In magnesium alloys based on the Mg–Y–Nd system, the key strengthening precipitate phases, β1 and β′, often form coupled-structures, with β′ precipitates invariably attached to both ends of the β1. A question here is how the attached β′ precipitates evolve as the β1 lengthens within the solid magnesium matrix. To investigate this, this study uses a multi-scale model based on a three-dimensional phase field approach to simulate the evolution of β1 and β′ precipitates in a β1/β′ coupled-structure. The simulation results reveal that, during the evolution process, the β1 precipitate lengthens, while the attached β′ precipitates grow only at the side located along the direction of β1 extension and dissolves at the opposite side. This results in a visual effect where the β′ precipitates appear to “move” within the solid matrix. This phenomenon is governed by the interplay between chemical free energy and elastic strain energy. Chemical free energy promotes uniform growth of the β′ precipitates. However, the elastic strain energy, generated by the β′ precipitates and the stress field concentrated at the end of the β1 plate to which they are attached, favours growth of only one side of the β′ precipitates while causing dissolution at the other side. When the evolution of a coupled-structure is influenced by neighbouring coupled-structures, the evolution of β′ precipitates is strongly driven by the minimization of elastic strain energy. In general, the β′ precipitates tend to grow under tensile stress fields and dissolve under compressive stress fields.

Insight into the initiation and propagation mechanism of desiccation cracking in clayey soil from DEM simulations

Desiccation cracking, a common natural phenomenon, significantly affects the mechanical and hydraulic properties of clayey soils. This study employs 3D Discrete Element Method (DEM) to investigate the initiation and propagation mechanisms of soil desiccation cracking. By integrating water evaporation at the soil surface and water transportation between soil grains into a traditional DEM model, we unveil a sequential and hierarchical pattern in the development of desiccation cracks. Initially, micro cracks proliferate and coalesce in regions of soil defects characterized by the lowest coordination numbers, leading to the genesis of primary cracks. Subsequently, a complex network of cracks propagates, governed by the interplay between cracking and the redistribution of the tensile stress field. As desiccation advances, the detachment of soil from the bottom wall and an increase in soil strength contribute to the stabilization of the crack network. Notably, the hierarchical nature of desiccation cracking is predominantly shaped by initial soil defects and subsequently refined by stress concentration within the soil clods, correlating with changes in the length-to-height ratio of the soil clods.

Stress-deformation analysis of the cracked elastic body

A new analytical plane Elastic Fracture Mechanics (LEFM) model of the effective elastic moduli exhibited by an isotropic elastic cracked solid in tensile and compressive stress fields is presented. The effective Young’s modulus and Poisson’s ratio E¯,v¯, respectively, relate the stresses applied to the cracked solid with its macroscopic deformation. In the case of a compressive stress field the effective elastic moduli depend solely on properly oriented cracks that are either open or closed. This model is then used for the stress and displacement estimations around a circular axisymmetric hole under internal pressure and external hydrostatic stress. The creation of the hole alters the stresses in its neighborhood, and induces a deterioration of the elastic moduli. In this manner, the effective elastic moduli depend on the radial distance from the hole’s boundary. The validation of the algorithm was done against Kirsch’s analytical solution of the axisymmetric hole problem for nearly zero density of cracks as well as for large values of the friction angle. The model predicts a lower tangential stress concentration at the wall of the hole compared to that predicted by the constant linear elasticity solution and a maximum stress concentration that is not necessarily located at the wall of the hole. This apparent enhancement of rock strength adjacent to the wall is more pronounced for larger concentrations of open cracks.

Numerical simulation of fault activity in the Qilian tectonic belt and dynamic background of Menyuan earthquake series

Some faults in the Qilian tectonic belt are seismogenic areas for strong earthquakes, including the western section of the Lenglongling fault, which frequently occures moderate-strong Menyuan earthquakes. In this study, using GPS velocity data of 1991–2015 as the boundary constraints, a three-dimensional viscoelastic finite element dynamic model is constructed by comprehensively considering the regional dynamic environment, crust-mantle transverse-longitudinal inhomogeneity, and spatial spreading of a complex fault system. The objective is to investigate the long-period characteristics of fault movement and stress change in the Qilian tectonic belt caused by tectonic loading, and to discuss the seismogenic conditions of the Menyuan earthquakes. The results show that the annual change of long-period movement and stress of the major faults in the Qilian Mountain tectonic zone are characterized by significant segmentation. Due to its unique geometric bend morphology, the western section of Lenglongling fault has a low movement rate, significant slip deficit and high shear stress accumulation, which are conducive to the gestation and occurrence of earthquakes. Furthermore, the seismogenic area of the Menyuan earthquake series is jointly subjected to NE-SW compressive and NW-SE tensile stress fields, and the maximum shear stress and elastic strain energy accumulate faster than in the surrounding areas. Overall, the western section of the Lenglongling fault has a strong dynamic background and favorable conditions for the frequent occurrence of the Menyuan earthquake series.

The role of cavitation in the toughening of elastomer nanocomposites reinforced with graphene nanoplatelets

The toughening of different types of elastomers through the incorporation of graphene nanoplatelets (GNPs) has been investigated. Both the tear strength and tearing energy are increased significantly through a combination of mechanisms such as debonding, pull-out and cavitation. The processes that occur ahead of a tear/crack tip in natural rubber filled with GNPs have been monitored in situ using synchrotron-based nanoscale X-ray computed tomography. The GNP particles are found to debond and form voids that grow under stress leading to considerable energy absorption. The mechanisms of cavitation and void growth are analysed theoretically and it is shown that voids need to be larger than ∼1 μm in size to grow in the triaxial tensile stress field ahead of the tear/crack tip. The high level of cavitation and void growth found for the elastomers filled with micron-sized GNP particles is suggested to be the reason why these nanocomposites have a high tear resistance.

Investigation on the fracture mechanics characteristics and crack initiation of deep dense shale

The mechanical behavior of shale fractures significantly affects the structure and stability of hydraulic fracturing networks in shale gas reservoirs. Currently, there is insufficient research on the mechanical characteristics of fractures, crack initiation, and the prediction of fracture trajectories in deep dense shale. This study involved conducting direct tension, shear, and three-point bending fracture mechanical experiments on shale samples, complemented by numerical calculations and mechanistic analyses. The results show a significant influence of the bedding plane angle (γ) on the initiation properties and locations of shale fractures. With γ ranging from 0° to 90°, shale fractures transition from alignment with the bedding plane to penetration through it. Fracture initiation locations show a significant degree of randomness when fractures propagate along the bedding plane. The horizontal tensile stress changes with increasing γ, initially increasing and then decreasing as it moves away from the center. The evolution of the horizontal tensile stress field primarily causes alterations in shale fracture paths, reaching its peak value at γ = 45°. Shale initiation fractures can be classified into four types: tensile fractures through the bedding plane, tensile fractures along the bedding plane, shear fractures across the bedding plane, and shear fractures along the bedding plane. Established a criterion called the “maximum stress strength ratio” to determine fracture initiation, which can predict the initiation properties, locations, and paths of shale fractures. When γ is small, fractures mainly propagate along the bedding plane, with a higher likelihood of initiation occurring at the center of the specimen. Conversely, when γ is large, fractures mainly propagate through the bedding plane. The spacing of the bedding planes minimally affects the predicted fracture paths of shale. This study is of significant theoretical importance for reservoir stimulation and stability assessment in deep dense shale gas reservoirs.

The effects of stress ultrasonic rolling on the surface integrity and fatigue properties of TiB2/7050 Al composite

In the present work, a new surface mechanical strengthening (SMS) technique named stress ultrasonic rolling (SUR), which is ultrasonic rolling (UR) assisted with a uniaxial tensile elastic stress field, was reported and successfully conducted on 5 % wt TiB2/7050Al composite. Based on the experimental analysis and numerical simulation, the effects of SUR on surface integrity and fatigue performance of the composite were comprehensively investigated. Compared with ordinary UR, SUR further enhanced the fatigue strength at 106 cycles of the composite by 5 % and prolonged the fatigue life of the composite under the stress level of 532.8 MPa by 1.8 to 3.3 times, which are attributed to the comprehensive effect of excellent surface finish, larger and deeper compressive residual stress (RSc) layer, dispersed TiB2 particles distribution in the surface, and superficial nanocrystalline structures. Besides, the assistance of uniaxial tensile elastic stress field did not increase the amount of surface plastic deformation, which indicates the RSc generated by SUR should have similar mechanical and thermal stability to that produced by ordinary UR treatment.

Three-dimensional damage and rupture patterns of different thicknesses of rock mass with open joints under blast loading

There are an immense number of discontinuous structural surfaces represented by tensile joints in natural rock mass, in which the thickness of tensile joints determines the form how stress wave interacts with joint surface, which has a significant influence on the fracture behavior of jointed rock mass under blast loading. Open joint specimens were prepared using 3D printing technology, an indoor 3D blasting experiment was carried out with respect to different open joint thicknesses. Through CT scanning and three-dimensional reconstruction, the rupture and the distribution patterns of three-dimensional cracks of the post-blasting specimens were compared, and the rupture characteristics of the rock masses with different open joint thicknesses under blast loading were analyzed. The blasting process of the rock masses with open joints was inverted by AUTODYN numerical simulation software, the effects of open joint thickness on the propagation of stress wave and the three-dimensional damage characteristics of rock mass were revealed. Results showed that under the blast load, the wing cracks derived from the end of the open joints are greatly affected by the thickness of the joints and as the joint thickness increases, the annular derived cracks formed on the right outer surface of the specimen gradually decrease. In case of a change in the open joint thickness, the intensity at which the stress wave diffracts and transmits through the end of the joint will be directly affected. This makes it hard for the wing cracks at the end to initiate, the distribution density of the radial tension cracks traversing through the open joint surface attenuates obviously, resulting in the decrease of the fractal dimension and the damage extent of the specimen. As the thickness of open joints increases, the blast stress wave running through the joint surface will endure a time delay and reduced intensity, the closure of the joint surface gradually reduces, and the degree of stress concentration at the end gets weak. In the course of stress wave propagation, the rock mass on the back-blast side of the joint endures the combined actions of compressive stress field, tensile and tangential stress field and compressive and tangential stress field. As the thickness of open joint increases, the time point for the back-blast side to reach the peak stress is delayed, the intensity of the composite stress field subjected to compressive and tangential stress field decreases, and the normal displacements on the near-blast side and the back-blast side of the joint follow the opposite trend.

TECTONIC STRESSES IN THE CHERSKY FAULT ZONE (BAIKAL RIFT SYSTEM

Based on the kinematic and structural-paragenetic approaches, there were performed the reconstructions of tectonic stresses in the Chersky fault zone. Rank analysis as applied to specialized mapping of fault zones was made for heterochronous rock complexes: Paleozoic, Upper Oligocene – Lower Pliocene and Upper Pliocene – Quaternary. There are distinguished three regional stress fields: Pre-Cenozoic compressive stress field with the NW-SE striking principal axis and two Cenozoic tensile stress fields with different axial orientations. The Cenozoic tensile stress field with a sub-meridionally striking minimum compression axis may be an earlier occurrence because it was found to exist in the Paleozoic and Oligocene – Early Pliocene rocks, and the tensile stress field, with the NW-SE axial orientation, may be later occurrence as reconstructed for all rock complexes including Quaternary pebbles. No evidence was found of tectonic shear stresses within the studied segment of the Chersky fault zone. Consideration is being given to probable reasons for the absence of residual shear deformations in the region and to the problems in the study of hierarchy of the upper crustal tectonic stresses.

Influence of advanced engineering measures on displacement and stress field of surrounding rock in tunnels crossing active strike-slip faults

Based on significant improvements in engineering materials, three advanced engineering measures have been proposed—super anchor cables, high-strength concrete anti-fault caverns, and grouting modification using high-strength concrete-to resist fault dislocation in the surrounding rock near tunnels crossing active strike-slip faults. Moreover, single- or multiple-joint advanced engineering measures form the local rock mass-anti-fault (LRAF) method. A numerical method was used to investigate the influence of LRAF methods on the stress and displacement fields of the surrounding rock, and the anti-fault effect was evaluated. Finally, the mechanism of action of the anchor cable was verified using a three-dimensional numerical model. The numerical results indicated that the anchor cable and grouting modification reduced the displacement gradient of the local surrounding rock near the tunnels crossing fault. Furthermore, anchor cable and grouting modifications changed the stress field of the rock mass in the modified area. The tensile stress field of the rock mass in the modified anchor cable area was converted into a compressive stress field. The stress field in the modified grouting area changed from shear stress in the fault slip direction to tensile stress in the axial tunnel direction. The anti-fault cavern resisted the dislocation displacement and reduced the maximum dislocation magnitude, displacement gradient, and shear stress. Among the three advanced engineering measures, the anchor cable was the core of the three advanced engineering measures. An anchor cable, combined with other LRAF measures, can form an artificial safety island at the cross-fault position of the rock mass to protect the tunnel. The research results provide a new supporting idea for the surrounding rock of tunnels crossing active strike-slip faults.

Αn efficient numerical model for the simulation of debonding of adhesively bonded titanium/CFRP samples induced by repeated symmetric laser shocks

ABSTRACT Novel engine fan blades are made of 3D woven composite materials and incorporate a protective metallic layer at the leading edge. The end-of-life of such structures involves complicated disassembly and recycling processes. In this paper, laser-shock is being investigated as an environmentally friendly disassembly method. In this context, symmetric laser-shock experiments that have been conducted in a previous work using a time delay between the shots have been proven successful for debonding initiation and propagation as they manage to effectively focus the tensile stress field developed by the shock waves at the bondline. In this paper, a numerical model simulating the symmetric laser-shock disassembly of titanium/CFRP specimens has been developed using the LS-Dyna explicit FE code. The aim is to give a deeper insight into the physical mechanisms and to optimize the experimental process. To simulate the behavior of the titanium part, the Johnson-Cook material model in combination with Grüneisen equation of state has been employed, while for the composite part a progressive damage material model incorporating high-strain rate effects has been used. The bondline between the two parts has been modeled using cohesive zone elements. To obtain tensile and shear elastic and strength properties at high strain rates for the composite damage model, tension and punch shear Split-Hopkinson Bar tests have been conducted. The numerical results correlate well with back-face velocity profiles obtained from single sided laser shock experiments and with debonding patterns in the adhesive, observed in electron microscopy images, induced by symmetrical laser shock experiments. After the validation, the numerical model has been used successfully to simulate a larger disassembly process composed of 16 consecutive shots.

Subducted oceanic slab break-off in a post-collisional setting: Constraints from petrogenesis of Late Carboniferous dykes in central West Junggar, Xinjiang, NW China

AbstractNumerous Late Carboniferous – Early Permian dykes are found in West Junggar and represent an important part of the Central Asian Orogenic Belt. In this contribution, we use these dykes to assess the tectonic regime and stress state in the Late Carboniferous – Early Permian. The West Junggar dykes are mainly diorite/dioritic porphyrite with minor diabase and were formed in 324–310 Ma. They have been divided into two groups based on their orientation, petrology and geochronology. Group 1 dykes mostly comprise WNW-striking dioritic porphyrite and NE-striking diorite with minor diabase and resemble the Karamay-Baogutu sanukitoid. They were probably formed from depleted mantle at a relatively high temperature and pressure with the addition of 1–2% sediment/sedimental partial melt and 0–5% trapped oceanic crust-derived melts. Group 2 dykes are ENE-striking and are similar to sanukite in the Setouchi Volcanic Belt. These dykes were also derived from depleted mantle at a shallow depth but high temperature with the addition of 2–3.5% sediment/sedimental partial melt. Magma banding and injection folds in dykes and host granitoids indicate magma flow. Paleostress analysis reveals that both groups of dykes were formed in a tensile stress field. Their emplacement is favoured by presence of pre-existing joints or fractures in the host granitoids and strata. We conclude that large-scale asthenosphere mantle upwelling induced by trapped oceanic slab-off can explain the magmatism and significant continental crustal growth of West Junggar during Late Carboniferous to Early Permian.

Study on explosion in different cross-sectional shape charge cavity in tensile stress field

Purpose. To study nature and patterns of main cracks development in a solid medium during an explosion of explosive charge in charge cavity with longitudinal symmetrical incision and various cross-sectional shapes Methodology. Experimental methods were used to study process dynamics, nature and direction of cracks development during the explosion of explosive charge of various shapes and their transformation into a clear optical image under the influence of a focused laser beam through an optical system – the method of caustics. Study on stress field changes under the combined effect of static and dynamic loading on fracture medium by polarisation-optical method. Based on correlation analysis methods, study results are analysed. Findings. It is experimentally proved that changing angle from 0 to 45° between longitudinal cut and plane jointly affected by tensile stresses and explosion action promotes opening of main cracks both parallel and perpendicular to cut direction. Dependences of propagation of main cracks caused by an explosion in model under different loading conditions are constructed. Calculations of stress intensity coefficients in medium under explosion and tensile stresses were performed. Originality. Improved research methodology for establishing the mechanism of explosive loading of solid media by explosion of explosive charge of different cross-sectional shapes is proposed. Physical mechanism of main cracks formation and propagation in blast cavity under action of explosive charge of different shapes under different conditions of dynamic loading is revealed. Dimensions of symmetrical longitudinal incision and spatial location of crack along direction of tensile stresses are substantiated. Also, an idea of using a directed explosion to form a protective strip in the rock mass was further developed. Practical value. The research results received can be necessary for developing new technical solutions to provide additional protective measures in the field of environmental and seismic safety of protected civil and industrial facilities during blasting operations in quarries and mines.

The role of Cr, P, and N solutes on the irradiated microstructure of bcc Fe

The objective of this study is to understand irradiation-induced and assisted defect evolution in binary body center cubic (bcc) Fe-based alloys. The broader class of bcc ferritic alloys are leading candidates for advanced nuclear fission and fusion applications, in part due to their exceptional void swelling resistance. However, their irradiated microstructure evolution is sensitive to solute species present, since these solutes can act as traps for irradiation-induced defects due to the surrounding tensile or compressive stress fields. Here, three alloys (Fe-9.5%Cr, Fe-4.5%P, and Fe-2.3%N) are selected for study because they systematically exhibit varying solute sizes and solute positions (i.e., substitutional or interstitial). Ex situ and in situ ion irradiations reveal that Fe-P has a considerably finer and denser population of irradiation-induced defects than Fe-Cr and Fe-N at the same irradiation conditions, which is attributed to strong defect trapping at undersized substitutional P, consequently hindering the development of extended defects. Meanwhile, oversized substitutional solutes (e.g., Cr) and interstitial solutes (e.g., N) may also suppress dislocation loop development due to weak solute-defect trapping.

Spatially resolved Raman piezospectroscopy for nondestructive evaluation of residual stress in β-Ga2O3 films

In this paper, the piezospectroscopic effect for β-Ga2O3, i.e. the spectral band shift in response to strain/stress, has been calibrated by the indentation method using spatially resolved Raman spectroscopy for quantitative stress evaluation of Ga2O3 devices, taking advantage of the crack-tip tensile stress field and the spatial probe deconvolution. A series of Vickers indentation prints were introduced on (010) and () Ga2O3 single crystals, and the relationships between observed band shifts and residual stresses were clarified to determine the phonon deformation potentials of the Raman bands. Accordingly, a quantitative analysis of the residual stress field in a Ga2O3 thin film grown on (0001) sapphire by plasma-assisted pulsed laser deposition, which revealed the presence of a gradient of incompletely released stress in the depth direction of the film, is shown as an example.

Tensile behavior of Brazilian disks containing non-persistent joint sets subjected to diametral loading: experimental and numerical investigations

Structural defects are part of the inherent characteristics of rock masses. They can be found in fishers, joints, and beddings and can be divided into persistent or non-persistent ones. The coalescence of non-persistent cracks may lead to the formation of persistent joints under the tensile stress field, leading to rock mass instability. The mechanical behavior of non-persistent jointed disks under tensile stress has important implications for rock structures. In this paper, experimental and Discrete Element Method (DEM) numerical simulation approaches were adopted to investigate the effect of joint continuity factor (the relationship between joint length and rock bridge length), bridge angle, joint spacing, and loading direction in relation to joint angle on the tensile strength and stiffness as well as failure pattern. Cement-mortar-based Brazilian disks containing open non-persistent joints were constructed and subjected to diametral loading and simulated using a two-dimensional Particle Flow Code (PFC2D). The investigations revealed that the tensile strength, stiffness, and failure pattern of Brazilian disks are highly affected by non-persistent pre-existing cracks. The increase of joint continuity factor and loading direction leads to the reduction of both tensile strength and stiffness. However, when spacing increases, tensile strength and stiffens have a minimum at the average spacing, but it was concluded that bridge angle does not affect both parameters. Finally, the results showed that the experimental and numerical approaches are in good agreement, and almost all the parameters affect the failure pattern, and some failure patterns such as step-path failure, splitting, or sliding may occur as a function of non-persistent joint sets.

Focal Mechanisms and Stress Field Characteristics of Microearthquakes in Baihetan Reservoir in the Downstream Area of Jinsha River

The Baihetan Reservoir was impounded on 6 April 2021, after which the water level rose significantly. Notably, after one week of impoundment, microseismic activities were prominent around the reservoir area, which was highly associated with the water level change. From 6 April 2021 to 31 December 2021, over 7000 microearthquakes were recorded by the seismic stations in the vicinity of the reservoir, including 12 ML > 3 events. The maximum was the 21 December 2021 ML3.9 earthquake in Qiluogou town, Sichuan. The post-impoundment seismic events were clustered in Hulukou town in the Qiaojia Basin, with an overall “Y-shaped” pattern. In this study, taking advantage of the high-frequency waveform matching approach, the pre- and post-impoundment focal mechanism solutions totaling 207 ML > 2 earthquakes are successfully obtained. The impoundment-induced stress change is analyzed, and the iterative joint inversion method is used to invert the stress field. Major results and conclusions include the following: (1) After impoundment, the number of normal fault earthquakes remarkably increased in the reservoir area; (2) Impoundment has led to a vertical compressive stress field and horizontal tensile stress field in the area where microearthquakes occurred. It is necessary to pay close attention to possible moderate-to-strong earthquakes in the future.

Effect of compression precracking on the near threshold fatigue crack propagation in an AISI 316L stainless steel

This work addresses an alternative test procedure based on fatigue precracking under compression to mitigate the potential effects of crack closure on near-threshold fatigue data and, thus, to obtain more consistent and reliable ΔKth-values. The method relies on performing a compression precracking, in which both maximum and minimum loads are compressive, thereby resulting in a tensile residual stress field at the crack tip. Fatigue crack growth (FCG) tests conducted on an AISI 316L stainless steel provide the experimental data upon which the near-threshold fatigue crack growth rate data for different test techniques can be determined. The experimental program includes FCG tests conducted on conventional C(T) specimens with crack size to specimen width ratio a/W=0.2, single edge notched SE(B) specimens under three-point bending with a/W=0.2 and two different span sizes, S, characterized by S/W=4 and 8. Overall, the present investigation shows that combining the compression precracking technique with the utilization of non-standard bend specimens having increased span improves evaluation of the near-threshold fatigue crack growth rate data for the tested AISI 316L steel, thereby providing more accurate ΔKth-values.

In situ stress variation and coal reservoir permeability response of the Jurassic Yan'an formation in the southwestern Ordos basin, China: Its impact on coalbed methane development

The in situ stress (ISS) and permeability determine the coalbed methane (CBM) development method and extraction efficiency to a certain extent. Based on the data of the CBM well test and microseismic monitoring in the Jurassic Yan'an Formation, a prediction model of the ISS is established, and its influence on permeability and CBM development in the southwestern Ordos Basin, China, is discussed. The results show that the orientations of maximum principal stresses (Shmax) in the study area's eastern, central, and western parts are NE–SW, SEE–NWW, and NNW–SSE, respectively. With the increased burial depth, the main ISS parameters show an S-shaped variation. The study area's ISS state can be divided into Shmax > vertical stress (Sv) > horizontal minimum principal stress (Shmin) (<420 m), Sv > Shmax > Shmin (420 m–800 m), and Shmax ≈ Sv > Shmin (>800 m), and the transformation depth of the ISS field is 550 m and 1000 m. The lateral pressure coefficients (λ) ranged from 0.30 to 1.19, with an average of 0.69. The λ, Shmax/Shmin and Shmin/Sυ of the stress field are small, which indicates that the horizontal tectonic stress is weak. The coal reservoir's permeability is distributed between 0.0084 and 6.84 mD (av. 1.13 mD). Affected by the variation of the ISS state in the vertical direction, the coal reservoir permeability shows obvious zoning. The tensile stress field is beneficial to high-permeability coal reservoir formation, but it is constrained by the coupling constraints of a coal reservoir's confining pressure and effective stress. The coal reservoirs are in a normal fault stress state, which is beneficial for improving their hydraulic fracturing effect. Since the Shmin in the study area is always smaller than the Sυ, the height of the fracturing fracture should be controlled in the fracturing of the coal reservoir to avoid the overlying aquifer being connected by fracturing fractures. The above new insights have important guiding significance for the hyperpermeability CBM reservoir prediction, well-bore structure and hydraulic fracturing design in the Ordos Basin.