Field Intensity Research Articles

Non-Contact Magnetometric Diagnostics of Pipelines Using the Metal Magnetic Memory Method

The non-contact magnetometric diagnostics (NCMD) of buried pipelines (oil and gas pipelines, heat lines, water supply lines, etc.) has been developed by Energodiagnostika Co. Ltd. since 2000 based on the 25-year experience of the metal magnetic memory (MMM) method application (ISO 24497-1:2007(E)). NCMD is based on measurement along the pipeline route of the Earth’s magnetic field intensity (HEarth) distortions caused by variation of the pipe metal magnetization in stress concentration zones (SCZs) and in zones of developing corrosion-fatigue damages. The paper describes the experience of complex diagnostics of buried pipelines based on NCMD, the MMM method and conventional methods of non-destructive testing. Based on NCMD results, the most strained pipeline sections are determined for their opening and additional control by the MMM method, ultrasonic testing and other NDT methods. On opened pipeline sections the MMM method is used to determine the presence of defects and the mechanical properties of the metal by hardness parameters. Inadmissible defects are removed, and the actual mechanical properties (yield strength and ultimate strength) are taken into account in check strength calculations. The inspection should provide the answer to the following question: “Where and when should a damage or an accident be expected?”. If this task is solved, then the possibility of timely replacement or repair of a potentially hazardous section is provided. Application of NCMD in combination with additional inspection of pipelines (UT, eddy current, etc.) in prospect holes determined by NCMD is aimed exactly at solution of this problem. The paper presents the experience of NCMD of buried polyurethane foam insulated pipelines in order to detect girth welded joints with developing damage.

Real-imaginary spectrum decomposition of the transparency spectra in microwave dressed Rydberg systems

To distinguish the contributions of electromagnetically induced transparency (EIT) and Autler-Townes splitting (ATS) in their applications in precision laser spectroscopy, we propose a real-imaginary spectrum decomposition method to investigate the transparency spectra in a four-level microwave (MW) dressed Rydberg system. We show that the opening transparency windows in the absorption spectra of probe field is a prominent character by EIT, EIT-ATS crossover, and ATS when the MW field is turned off and the intensity of the control field is adjusted. When the MW field is turned on and gradually increased, the EIT is destroyed and disappears. In addition, the most prominent characters that open a transparency window are the EIT-ATS crossover and the ATS. Then, if we further increase the intensity of the MW field, we find that the transparency windows open mainly due to the ATS. Compared to the previous considerations of this issue, which were limited to three-level systems, our four-level scheme reported here is useful for understanding the features of quantum interference in multilevel atomic systems, and has potential applications to study enhanced sensitivity, measurement spectroscopic, quantum processing, quantum communication, and transmission.

Flame spray pyrolyzed carbon-encapsulated Au/Fe3O4 nanoaggregates enabled efficient photothermal therapy and magnetic hyperthermia of esophageal cancer cells

Multifunctional magneto-plasmonic nanoparticles with magnetic hyperthermia and photothermal therapy could kill cancer cells efficiently. Herein, carbon-encapsulated Au/Fe3O4 (Au/Fe3O4@C) was fabricated using an enclosed flame spray pyrolysis. The nanostructures, including an Fe3O4 core (51.9–55.2 nm) with a decreasing carbon shell thickness and an Au core (4.68–8.75 nm) coated with 2–4 graphite layers, were tailored by tuning the C2H4 content in the reacting gas mixture. Saturation magnetization (33.7–48.2 emu/g) and optical absorption were determined. The carbon shell facilitated the dispersion of Au/Fe3O4 and restrained their laser-induced and magnetic field-induced coalescence and growth. Au/Fe3O4@C exhibited excellent magnetic resonance imaging capability (91.4 mM−1 s−1) and photothermal performance (65.4°C for 0.8 mg/mL Au/Fe3O4@C at a power density of 1.0 W/cm2 after 300 s near-IR laser irradiation (808 nm)). Moreover, the combined application of photothermal and magnetic-heating properties reduced the required intensity of both laser and magnetic field compared to the intensity of separate situations. Our work provides a unique, intriguing approach to preparing multicomponent core/shell nanoaggregates that are promising candidates for esophageal cancer cell therapy.

Systematic simulation of tumor cell invasion and migration in response to time-varying rotating magnetic field.

Cancer invasion and migration play a pivotal role in tumor malignancy, which is a major cause of most cancer deaths. Rotating magnetic field (RMF), one of the typical dynamic magnetic fields, can exert substantial mechanical influence on cells. However, studying the effects of RMF on cell is challenging due to its complex parameters, such as variation of magnetic field intensity and direction. Here, we developed a systematic simulation method to explore the influence of RMF on tumor invasion and migration, including a finite element method (FEM) model and a cell-based hybrid numerical model. Coupling with the data of magnetic field from FEM, the cell-based hybrid numerical model was established to simulate the tumor cell invasion and migration. This model employed partial differential equations (PDEs) and finite difference method to depict cellular activities and solve these equations in a discrete system. PDEs were used to depict cell activities, and finite difference method was used to solve the equations in discrete system. As a result, this study provides valuable insights into the potential applications of RMF in tumor treatment, and a series of in vitro experiments were performed to verify the simulation results, demonstrating the model's reliability and its capacity to predict experimental outcomes and identify pertinent factors. Furthermore, these findings shed new light on the mechanical and chemical interplay between cells and the ECM, offering new insights and providing a novel foundation for both experimental and theoretical advancements in tumor treatment by using RMF.

An accurate and realistic polarization model for night-sky brightness

Abstract Most measurements of the diffuse light of the night sky to date consider only the intensity of the light field, and current models can successfully reproduce these measurements. However, this approach is incomplete as it overlooks the polarization state of the light. Few measurements (and no successful models) of night-sky polarimetry appear in the literature. We present a new model of night-sky polarization that successfully reproduces observations in a heterogeneous environment and for a real distribution of finite-sized light sources over the intermediate region surrounding the observer. The model compares favourably with field measurements made in Slovakia in May 2021. The results described herein help advance understanding the angular distributions of artificial light at night from ground sources and the relative contributions of sources to the overall brightness of the night sky.

Internal Force Mechanism of Pisha Sandstone as a Soil Amendment to Improve Sandy Soil Structural Stability in Mu Us Sandy Land

Compounding Pisha sandstone (PSS) with sandy soil in Mu Us Sandy Land is a viable agronomical measure to effectively reduce soil erosion and improve soil quality due to the complementary characters and structures of the two materials. Aggregate stability is an important indicator to assess sandy soil erosion resistance and quality, which could be largely affected by soil surface electrochemical properties and particle interaction forces. However, the effect of the compound ratio and particle interaction forces on the aggregate stability of compound soils with Pisha sandstone and sandy soil is still unclear. Therefore, in this study, the electrochemical properties, particle interaction forces, and their effects on the aggregate stability of PSS and sandy soil at five volume ratios (0:1, 1:5, 1:2, 1:1, and 1:0) were determined to clarify the internal force mechanism of PSS to increase sandy soil structural stability in a 10-year field experiment. Experiments were measured by a combined method for the determination of surface properties and aggregate water stability. A ten-year field study revealed that the incorporation of Pisha sandstone significantly enhanced the soil organic carbon (SOC) and cation exchange capacity (CEC) (p < 0.05), while the CEC value notably increased from 4.68 to 13.76 cmol·kg−1 (p < 0.05). The soil surface potential (absolute value) and the electric field intensity gradually decreased with the increase in the Pisha sandstone content. For the compound soil particle interaction force, the addition of Pisha sandstone enhanced the van der Waals attraction force, reduced the net repulsive force between compound soil particles, and promoted the agglomeration of aeolian sandy soil. The overall trend of the aggregate breaking strength of compound soils under different addition ratios of PSS was 1:0 > 1:1 > 0:1 > 1:5 > 1:2. When the Pisha sandstone content in the compound soils was <50%, the aggregate stability was mainly influenced by compound soil particle interaction forces, and the interaction force increase was the key reason for the aggregate breakdown. When the Pisha sandstone content in the compound soils was ≥50%, the aggregate stability was affected by the combined effects of the compound soil particle composition and particle interaction forces. These results indicate that PSS addition ratios and particle interaction force are important factors affecting the structural stability of compound soils, in which the volume ratio of PSS to sandy soil of 1:2 is the appropriate ratio. Our study provides some theoretical references for further understanding of the compound soil structure improvement and sandy soil erosion control in Mu Us Sandy Land.

Extrinsic magnetised plasma kolakoski quasicrystal

This manuscript explores the microwave transmission properties of multilayer structures that employ the Kolakoski sequence. The structures, composed of alternating layers of extrinsic magnetized plasma, are analysed under normal incidence conditions, with a focus on various parameters such as frequency, external magnetic field intensity, and electron density. At frequencies higher than the plasma frequency, consistent bandgaps are observed across different layer counts, indicating strong transmission characteristics. Conversely, at frequencies lower than the plasma frequency, the thickness of the bandgap fluctuates due to the inherent nature of the Kolakoski sequence, suggesting potential applications in multi-channel filtering. The study demonstrates the ability to adjust the significant bandgap above the plasma frequency through manipulation of the external magnetic field. By increasing the strength of the magnetic field, the bandgap undergoes a shift and narrows, highlighting the tunability of the transmission properties. On the other hand, increasing the number of layers widens the bandgap below the plasma frequency, resulting in the emergence of narrow transmission peaks. Moreover, the influence of electron density on the transmission spectra is examined, showing that higher electron density leads to wider bandgaps, although with minimal frequency shifts. The intricate interplay between structural parameters, external factors, and transmission characteristics provides valuable insights for optimizing multi-channel microwave reflectors and related devices.

Robust Algorithms for the Analysis of Fast-Field-Cycling Nuclear Magnetic Resonance Dispersion Curves

Fast-Field-Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometry is a powerful, non-destructive magnetic resonance technique that enables, among other things, the investigation of slow molecular dynamics at low magnetic field intensities. FFC-NMR relaxometry measurements provide insight into molecular motion across various timescales within a single experiment. This study focuses on a model-free approach, representing the NMRD profile R1 as a linear combination of Lorentzian functions, thereby addressing the challenges of fitting data within an ill-conditioned linear least-squares framework. Tackling this problem, we present a comprehensive review and experimental validation of three regularization approaches to implement the model-free approach to analyzing NMRD profiles. These include (1) MF-UPen, utilizing locally adapted L2 regularization; (2) MF-L1, based on L1 penalties; and (3) a hybrid approach combining locally adapted L2 and global L1 penalties. Each method’s regularization parameters are determined automatically according to the Balancing and Uniform Penalty principles. Our contributions include the implementation and experimental validation of the MF-UPen and MF-MUPen algorithms, and the development of a “dispersion analysis” technique to assess the existence range of the estimated parameters. The objective of this work is to delineate the variance in fit quality and correlation time distribution yielded by each algorithm, thus broadening the set of software tools for the analysis of sample structures in FFC-NMR studies. The findings underline the efficacy and applicability of these algorithms in the analysis of NMRD profiles from samples representing different potential scenarios.

High-efficiency all-optical switching based on broadband coherent perfect absorption in an atom-cavity system

We propose an ultrahigh-efficiency and broadband all-optical switching scheme based on coherent perfect absorption (CPA) in linear and nonlinear excitation regimes in a cavity quantum electrodynamics (CQED) system. Two separate atomic transitions are excited simultaneously by two signal fields coupled from two ends of an optical cavity under the collective strong coupling condition. Three polariton eigenstates are produced which can be tuned freely by varying system parameters. The output field intensities of multiple channels are zero when the CPA criterion is satisfied. However, destructive quantum interference can be induced by a free-space weak control laser when it is tuned to be resonant to the polariton state. As a consequence, the CQED system acts as a coherent perfect light absorber/transmitter as the control field is turned on/off the polariton resonances. In particular, the proposed scheme may be used to realize broadband multi-throw all-optical switching in the nonlinear excitation regime. The proposed scheme is useful for constructing all-optical routing, all-optical communication networks and various all-optical logic elements.

Dependence of Lunar Pickup Ion Flux on Source Location: ARTEMIS Observations

The Moon is enveloped in an exosphere, which is comprised of a variety of neutral atoms and molecules. Once exospheric neutrals are ionized by photons, protons, or electrons from the Sun, the resulting ions are accelerated by the electromagnetic fields of their surroundings and can thereby travel away from their source locations. These ions are the so-called pickup ions and are frequently observed by the two Acceleration, Reconnection, Turbulence, and Electrodynamics of Moon’s Interaction with the Sun (ARTEMIS) spacecraft. In this study, we identify 115 events from an 11 yr period of ARTEMIS observations, which contain a total of 11,987 samples for our statistics. By using analytical ion trajectory calculations, we trace the source location of each pickup ion observation. Most pickup ion trajectories originate near the subsolar point, consistent with the efficiency of sputtering. We find that the flux of pickup ions strongly anticorrelates with the source altitude, providing indirect evidence of decreasing exospheric ion flux with increasing altitude. We also find that the flux of pickup ions does not show a significant relationship with the crustal magnetic field intensity. This implies that a depression of sputtering efficiency or the trapping of near-surface freshly born ions by a crustal magnetic anomaly may not reduce the subsequent pickup ion flux as effectively as expected. In summary, the present paper provides a statistical view of lunar pickup ion fluxes in association with the altitude, local time, and local crustal magnetic field of their source locations.

Effect of distributed Bragg reflectors on optoelectronic characteristics of GaN-based flip-chip light-emitting diodes

Abstract Distributed Bragg reflectors have been widely utilized in GaN-based flip-chip light-emitting diodes (FCLEDs) owing to their excellent reflection performance. Recently, wide reflected angle DBR (WRA-DBR) has been suggested to enhance the optical characteristics of GaN-based FCLEDs by incorporating multiple sub-DBRs with varying central wavelengths. However, the reflectivity of WRA-DBR decreases at large incident angle from 425 nm to 550 nm, which restricts further optical performance improvement of FCLEDs. Here, we demonstrate a quintuple-stack DBR comprised of five sub-DBRs. The quintuple-stack DBR possesses a high reflectivity (>97.5%) for incident angles below 50° within the blue and green light wavelength ranges. Compared to WRA-DBR, quintuple-stack DBR exhibits a higher reflectivity in wavelength range of 425 nm to 550 nm and thinner multilayer thicknesses. Furthermore, stronger electric field intensities exist in the top facet and sidewalls of FCLED with quintuple-stack DBR, revealing that quintuple-stack DBR is beneficial for enhancing the light extraction efficiency. As a result, the light output power of FCLED with quintuple-stack DBR is ~3% higher than that of FCLED with WRA-DBR at 750 mA.

Experimental research on combined magnetic separation and flotation for coal gasification fine slag

ABSTRACT To address the challenging issue of achieving high-precision carbon-ash separation in coal gasification fine slag, magnetic separation and flotation techniques were employed to study their respective separation effect. Optimization tests were conducted to determine the optimal magnetic field gradient and magnetic field intensity, and the ash content of magnetic separation concentrates was 72.18%, with a reduction of 7.28% compared to the sample. Additionally, the magnetic separation tailings exhibited an ash content of 93.99%. Through flotation tests, the optimum conditions for kerosene and composite collector was established. The ash content of flotation concentrates decreased by 16.39% compared to the sample, and the ash content of flotation tailings was 95.83%. A comparative analysis revealed that the combined separation process outperforms single separation methods in reducing the ash content of the concentrates, and realize the further quality improvement and separation effect. Detailed analysis of magnetic characteristics and XRD, XPS analysis studies on the sample and the products, indicated that the magnetic separation effectively pre-removes a certain amount of magnetic high ash minerals. Furthermore, the collector treatment significantly increased hydrophobicity difference between residual carbon and ash matter, which ultimately enhancing the flotation effect.

Research on cobalt-molybdic sulfide composite coatings deposited by magnetic jet electrodeposition under different magnetic field intensities

Co-MoS2 composite coatings were deposited by the magnetic jet electrodeposition under different magnetic field intensities. The growth orientation and deposition mechanism of Co-MoS2 composite coatings under magnetic jet electrodeposition were analyzed based on the weak adsorption theory of nanocomposite co-deposition. Research showed that the coating topography changed from a blade-like structure to a cellular structure, and the cellular structure became a granular protrusion structure with increase of the magnetic field intensity. Compared with Co-MoS2 composite coating in jet electrodeposition, the orientation of Co shifted from (110) to (101) as the magnetic field intensity increased in magnetic jet electrodeposition. The adhesion, microhardness, adhesion, corrosion and wear resistance of the composite coatings were enhanced, which was attributed to the influence of the magnetic field on the growth orientation of the composite coating and the coordinated lubrication effect in the Co-MoS2 composite coating.

Investigation of isothermal entropy change, relative cooling power, and refrigerant capacity of GdCoAl nanocomposite thin film by changing the Al ratio at low magnetic fields of 100 Oe and 1000 Oe

There are two challenges with magnetocaloric materials (MCMs): the production of low-cost materials and the applicability of MCMs at low magnetic fields. Due to the abundance of Al, the effects of Al composition in GdCoAl nanocomposite thin film alloys were investigated by fabricating Gd19.60Co20.00Al60.40 and Gd38.62Co28.43Al32.95 alloys. Nanometric grains were seen in the surface images with different grain dimensions by changing the Al ratio. With an increase in the Al ratio, the Z-height dimension decreased. The grains were homogeneous and small for the ternary thin film with a high Al ratio. It was established that the alloy with a higher amount of Al had a higher Curie temperature at a lower (100 Oe) magnetic field; it performed worse when compared to the low Al ratio sample regarding RCP and RC due to the small full width at half maxima. However, Gd19.60Co20.00Al60.40 at a higher magnetic field intensity of 1000 Oe, performed better.

Dispersion-assisted high-dimensional photodetector.

Intensity, polarization and wavelength are intrinsic characteristics of light. Characterizing light with arbitrarily mixed information on polarization and spectrum is in high demand1-4. Despite the extensive efforts in the design of polarimeters5-18 and spectrometers19-27, concurrently yielding high-dimensional signatures of intensity, polarization and spectrum of the light fields is challenging and typically requires complicated integration of polarization- and/orwavelength-sensitive elements in the space or time domains. Here we demonstrate that simple thin-film interfaces with spatial and frequency dispersion can project and tailor polarization and spectrum responses in the wavevector domain. By this means, high-dimensional light information can be encoded into single-shot imaging and deciphered with the assistance of a deep residual network. To the best of our knowledge, our work not only enables full characterization of light with arbitrarily mixed full-Stokes polarization states across a broadband spectrum with a single device and a single measurement but also presents comparable, if not better, performance than state-of-the-art single-purpose miniaturized polarimeters or spectrometers. Our approach can be readily used as an alignment-free retrofit for the existing imaging platforms, opening up new paths to ultra-compact and high-dimensional photodetection and imaging.

Effect of pulsed electric field processing on the quality characteristics and enzyme activity of tender coconut water.

Tender coconut water (TCW) is a natural drink rich in natural electrolytes, minerals, salts and sugars; it has good health benefits. But, its shelf-life is very limited because of the active nature of enzymes present in it when exposed to air. Therefore, the processing of TCW is necessary to inactivate the enzymes. So, this study aims to observe the effect of various process parameters of pulsed electric field (PEF) on the quality parameters of TCW. For the treatment of TCW with PEF, a full-factorial design of experiments was followed with process parameters such as three levels of electric field intensity (8, 12, and 16 kV/cm), two levels of pulse width (PW) (50 and 70 μs), and six levels of the number of pulses (2000 to 12,000 pulses) were considered at a constant pulse OFF time of 75 ms. PEF treatment did not significantly change pH, total soluble solids, and viscosity. However, it significantly affected vitamin C, colour, and total and reducing sugars. PEF treatment significantly enhanced the total phenolic content and antioxidant activity by 23.17% and 42.49%, respectively. At the same time, significant inactivation of polyphenol oxidase (100%) and peroxidase (60.2%) was observed at PEF treatment conditions of 16 kV/cm, 70 μs PW, and 12,000 pulses. Moreover, no significant change in the sensory acceptability of PEF-treated TCW (16 kV/cm, 70 μs PW, 12,000 pulses) when compared to the untreated/fresh TCW, which is a promising sign.

Investigating changes in the electric field profiles of transverse modes in fibres due to bending

AbstractA model is presented for calculating the electric field profiles of transverse modes in fibres. Using this model, the electric field propagation of transverse modes was calculated and compared in both bent and straight Yb and Ho fibres. Our simulations revealed that the field intensities of the modes did not consistently increase or decrease by bending as expected, but rather fluctuated as the bending radii of the fibres changed from 1 to 100 cm. Additionally, it was observed that at certain bending radii, the modes of the fibres became deformed and transitioned into higher modes. Furthermore, the extent to which the modes stretched towards cladding due to bending was calculated. To provide a more comprehensive analysis of the results and investigate the effects of the physical parameters of the fibres on the bent fibre modes, simulation results were presented for two different V numbers and core radii.

Switching between slow light and fast light by static magnetic field in a degenerate four-level atomic system at room temperature

The optical response of a magnetic-degenerated four-level atom system to the two left and right circular polarization components of the probe field is represented at room temperature. The absorption spectrum and group index for the two polarization components of the probe field are controlled according to the static magnetic field and the coupling field under electromagnetically induced transparency condition. By varying the strength of the static magnetic field, the optical response of the atomic medium can be changed from transparency to absorption or vice versa and hence the amplitude of group index also changes from positive extreme to negative extreme or vice versa. The same phenomenon also occurs when changing the coupling field intensity. In addition, temperature also significantly influence on the optical response of the atomic medium, which changes not only the amplitude but also the sign of the group index as the temperature increases. Our analytical results can be useful for experimental observation and related applications of light group index/velocity at room temperature.

Free electron emission in vacuum assisted by photonic time crystals

The Cerenkov radiation and Smith–Purcell (SP) effect state that free electron emission occurs exclusively in dielectrics when the velocity of the particles exceeds the speed of light in the medium or in the vicinity of periodic gratings close to each other within a vacuum. We demonstrate that free electrons in a vacuum can also emit highly directional monochromatic waves when they are in close proximity to a medium that is periodically modulated temporally, suggesting the existence of the temporal SP effect. The momentum band gaps of time-varying media, such as photonic time crystals (PTCs), create new pathways for the injection of external energy, allowing the frequency, intensity, and spatial distribution of electromagnetic fields to be controlled. Moreover, the PTC substrate enables the conversion of localized evanescent fields into amplified, highly directional propagating plane waves that are only sensitive to the velocity of particles and the modulation frequency, which allows us to observe and utilize Cerenkov-like radiation in free space. Our work presents significant opportunities for the utilization of time-varying structures in various fields, including particle identification, ultraweak signal detection, and improved radiation source design.

Pillar electrodes embedded in the skeletal muscle tissue for selective stimulation of biohybrid actuators with increased contractile distance.

Electrodes are crucial for controlling the movements of biohybrid robots, but their external placement outside muscle tissue often leads to inefficient and non-selective stimulation of nearby biohybrid actuators. To address this, we propose embedding pillar electrodes within the skeletal muscle tissue, resulting in enhanced contraction of the target muscle without affecting the neighbor tissue with a 4 mm distance. We use finite element method (FEM) simulations to establish a selectivity model, correlating the VIE (volume integration of electric field intensity within muscle tissue) with actual contractile distances under different amplitudes of electrical pulses. The simulated selective index closely aligns with experimental results, showing the potential of pillar electrodes for effective and selective biohybrid actuator stimulation. In experiments, we validated that the contractile distance and selectivity achieved with these pillar electrodes exceed conventional Au rod electrodes. This innovation has promising implications for building biohybrid robots with densely arranged muscle tissue, ultimately achieving more human-like movements. Additionally, our selectivity model offers valuable predictive tools for assessing electrical stimulation effects with different electrode designs.