Field Emission In-lens Scanning Electron Microscopy Research Articles

Morphological Characterization of Deciduous Enamel and Dentin in Patients Affected by Osteogenesis Imperfecta

The purpose of this study was to clarify the structural and ultrastructural alterations of the enamel and dentin collagen network in the deciduous teeth of children affected by osteogenesis imperfecta (OI) using field-emission in-lens scanning electron microscopy (FEI-SEM) and transmission electron microscopy (TEM) analyses. Exfoliated primary teeth were collected from children with a diagnosis of OI and from healthy individuals (N = 24). Tooth slices containing both dentin and enamel were fixed, dehydrated and dried, gold sputtered, and observed using FEI-SEM. Additional dentin fragments were decalcified, dehydrated, embedded in resin, cut, and processed for TEM analysis. Under FEI-SEM, the enamel in OI-affected children showed an irregular prism distribution with the enamel hydroxyapatite crystals unpacked. Ultrastructural correlative analysis of the dentin in patients affected by OI showed an altered collagen pattern with a low density. In some areas, teeth in OI patients showed a reduction in the number of dentinal tubules, with odontoblastic process missing in most of the tubules. The presence of altered dentine and enamel organization in OI children was firmly established at an ultrastructural level, but additional biochemical studies are necessary in order to clarify quantitatively and qualitatively the collagenic and non-collagenic proteins in this disorder.

Dentin matrix protein 1 and dentin sialophosphoprotein in human sound and carious teeth: an immunohistochemical and colorimetric assay

Dentin matrix protein 1 (DMP1) and dentin sialophosphoprotein (DSPP) are extracellular matrix proteins produced by odontoblasts involved in the dentin mineralization. The aim this study was to compare the distribution of DMP1 and DSPP in human sound dentin vs human sclerotic dentin. Sixteen sound and sixteen carious human molars were selected, fixed in paraformaldehyde and processed for immunohistochemical detection of DMP1 and DSPP by means of light microscopy, transmission electron microscopy (TEM) and high-resolution field emission in-lens scanning electron microscopy (FEI-SEM). Specimens were submitted to a pre-embedding or a post-embedding immunolabeling technique using primary antibodies anti DMP1 and anti-DSPP and gold-conjugated secondary antibodies. Other samples were processed for the detection of DMP1 and DSPP levels. Dentin from these samples was mechanically fractured to powder, then a protein extraction and a protein level detection assay were performed. DMP1 and DSPP were more abundant in carious than in sound samples. Immunohistochemical analyses in sclerotic dentin disclosed a high expression of DMP1 and DSPP inside the tubules, suggesting an active biomineralization of dentin by odontoblasts. Furthermore, the detection of small amounts of these proteins inside the tubules far from the carious lesion, as shown in the present study, is consistent with the hypothesis of a preventive defense of all dentin after a noxious stimulus has undermined the tooth.

Electron microscopic detection and activity of glucosyltransferase B, C, and D in the in situ formed pellicle

Objective Glucosyltransferases (GTFs) represent a virulence factor of mutans streptococci. The aim of the present in situ study was to investigate the distribution of different GTF-isoforms in the pellicle. Design Bovine enamel slabs were fixed on buccal and palatal sites of individual splints worn by five subjects for 30 and 120 min to allow pellicle formation. Pellicle specimens were processed for transmission electron microscopy (TEM) and field emission in-lens scanning electron microscopy (FEI-SEM). Gold-immunolabelling was used for detection of GTF-isoforms B, C and D. Furthermore, glucosyltransferase activity of 3-, 30- and 120-min pellicles was tested via determination of fructose release. Results All isoforms of the enzyme were found to be randomly distributed within all layers of the pellicle. In cross-sections (TEM), GTF D was the most abundant isoform. More labelled molecules were detected on buccal sites compared with palatal surfaces, the number of molecules detected increased with time. The amount of GTF B, C and D found on the pellicle surface by FEI-SEM showed no correlation with pellicle formation time or localisation in the oral cavity. Overall, GTF D was detected more frequently on the surface than GTF B and C. All pellicles tested showed GTF-activity. Conclusion The study shows for the first time the presence of the GTF-isoforms B, C and D within all layers of the in situ formed pellicle. This emphasises the impact of streptococcal products on the composition of the pellicle and illustrates a mechanism used by bacteria to colonize dental surfaces.

Immunohistochemical identification of MMP‐2 and MMP‐9 in human dentin: Correlative FEI‐SEM/TEM analysis

Matrix metalloproteinases (MMPs) are a family of peptidases trapped within mineralized dentin matrix and involved with degradation of the extracellular matrix components in hybrid layers and caries. Despite their identification through indirect evidences and biochemical assays, MMP-2 and -9 have not been localized within the human dentin extracellular organic matrix. Thus, this study aimed to assess the localization and distribution of MMP-2 and -9 in human dentin organic matrix by employing a correlative field emission in-lens-scanning electron microscopy (FEI-SEM) and transmission electron microscopy (TEM) immunohistochemical approach. Dentin specimens were submitted either to a preembedding or to a postembedding immunolabeling technique using primary monoclonal antibodies anti-MMP-2 and anti-MMP-9 and exposed to a secondary antibody conjugated with gold nanoparticles. MMP-2 and -9 labelings were identified in the demineralized dentin matrix as highly electron-dense gold particles dispersed on the collagen fibrils. Correlative FEI-SEM/TEM observations confirmed that MMP-2 and MMP-9 are endogenous components of the human dentin organic matrix and revealed the three-dimensional relationship between these proteinases and the collagen fibrils, showing that both antibodies yielded a similar labeling pattern. In conclusion, the results of the study contribute to reveal distinct distribution pattern of gelatinases and support the hypothesis that these enzymes are intrinsic constituents of the dentin organic matrix after decalcification.

Immunohistochemical identification of type I and type III collagen and chondroitin sulphate in human pre‐dentine: a correlative FEI‐SEM/TEM study

To identify type I- (I-CF) and type III-collagen fibrils (III-CF) and chondroitin 4/6 sulphate (CS) within human pre-dentine by means of a correlative analysis under field emission in-lens-scanning electron microscopy (FEI-SEM) and transmission electron microscopy (TEM). Human-extracted teeth were obtained and submitted to either a pre-embedding or a post-embedding immunolabelling procedure using monoclonal primary antibodies anti-I-CF, anti-III-CF and anti-CS. Gold-conjugated secondary antibodies were coupled to primary antibodies to visualize labelling under the electron beam. Correlative labelling patterns were obtained for I-CF and CS under both FEI-SEM and TEM. Field emission in lens-SEM analysis revealed an intricate three-dimensional network of I-CF and CS clarifying the intimate relationship between the two main components of the pre-dentine organic matrix. TEM analysis revealed odontoblasts exhibiting intracellular labelling for CS, which became more intense and diffuse over the pre-dentine organic matrix. The same diffuse immunoreaction was revealed for I-CF, whereas a weak immunolocalization of III-CF was found scattered throughout the pre-dentine layer and over the collagen fibrils. Both the pre- and post-embedding immunohistochemical approaches have led to the visualization of CF- and CS-labelling distribution within the pre-dentine layer, adding further knowledge on the elucidation of collagen-proteoglycans interaction in the organic matrix of human dental roots.

Concentration of Ran on chromatin induces decondensation, nuclear envelope formation and nuclear pore complex assembly

Nuclear envelope (NE) formation can be studied in a cell-free system made from Xenopus eggs. In this system, NE formation involves the small GTPase Ran. Ran associates with chromatin early in nuclear assembly and concentration of Ran on inert beads is sufficient to induce NE formation. Here, we show that Ran binds to chromatin prior to NE formation and recruits RCC1, the nucleotide exchange factor that generates Ran-GTP. In extracts prepared by high-speed centrifugation, increased concentrations of Ran are sufficient to induce chromatin decondensation and NE assembly. Using field emission in-lens scanning electron microscopy (FEISEM), we show that Ran promotes the formation of smoothed membranes and the assembly of nuclear pore complexes (NPCs). In contrast, RanT24N, a mutant that fails to bind GTP and inhibits RCC1, does not support efficient NE assembly, whereas RanQ69L, a mutant locked in a GTP-bound state, permits some membrane vesicle recruitment to chromatin, but inhibits vesicle fusion and NPC assembly. Thus, binding of Ran to chromatin, followed by local generation of Ran-GTP and GTP hydrolysis by Ran, induces chromatin decondensation, membrane vesicle recruitment, membrane formation and NPC assembly. We propose that the biological activity of Ran is determined by its targeting to structures such as chromatin as well as its guanine nucleotide bound state.

Correlative high-resolution morphologic analysis of the three-dimensional organization of human chromosomes.

A correlative morphologic analysis was carried out on isolated metaphase chromosomes by means of field emission in-lens scanning electron microscopy (FEISEM) and atomic force microscopy (AFM). Whereas FEISEM provides ultra-high resolution power and allows the surface analysis of biological structures free of any conductive coating, the AFM allows imaging of biological specimens in ambient as well as in physiologic conditions. The analysis of the same samples was made possible by the use of electrical conductive and light transparent ITO glass as specimen holder. Further preparation of the specimen specific for the instrumentation was not required. Both techniques show a high correlation of the respective morphologic information, improving their reciprocal biological significance. In particular, the biological coat represents a barrier for surface morphologic analysis of chromosome spreads and it is sensitive to protease treatment. The chemical removal of this layer permits high-resolution imaging of the chromatid fibers but at the same time alters the chromosomal dimension after rehydration. The high-resolution level, necessary to obtain a precise physical mapping of the genome that the new instruments such as FEISEM and AFM could offer, requires homogeneously cleaned samples with a high grade of reproducibility. A correlative microscopical approach that utilizes completely different physical probes provides complementary useful information for the understanding of the biological, chemical, and physical characteristics of the samples and can be applied to optimize the chromosome preparations for further improvement of the knowledge about spatial genome organization.

Field emission in-lens SEM study of enamel and dentin.

This investigation used field emission in-lens scanning electron microscopy (FEISEM) for the study of tooth surfaces, with particular reference to adhesive bonding and acid conditioning. Dentin wafers with an intact enamel periphery were treated by either ethylenediaminetetraacetic acid (EDTA) (pH 7.4) or phosphoric acid (pH 0.7). The samples were then fixed, sequentially dehydrated in alcohol, and either air- or critical point-dried. After coating, surfaces were examined by FEISEM. For enamel, intraprismatic crystals were clearly recognizable, with the crystals showing both a longitudinal and parallel orientation to the long axis of the prisms. For dentin, the surface ultrastructure (mineral crystals and collagen banding) for the both untreated and treated samples was observed. Fine structures measuring on the order of 6 nm were also observed on samples treated by EDTA. We conclude that FEISEM can routinely provide high-resolution images of enamel and dentin, and that it has the capability of revealing the defined distribution of crystals and collagen fibers in dental tissues.

Nuclear Envelope and Nuclear Pore Complex Dynamjcsin vitro, Visualised by FEISEM

As the defining structure in eukaryote cells, the nuclear envelope is completely dismantled and reformed within an hour or so at each cell division (open mitosis). In yeast and some insect tissues, closed mitosis occurs, in which the nuclear envelope is maintained largely intact throughout chromosome separation. Use of cell free systems has allows us access to the mechanisms of cell division and NE dynamicsin vitroby FEISEM (Field Emission In Lens Scanning Electron Microscopy. We have used demembranated Xenopus sperm heads as a source of DNA, which is incubated in an extract of Xenopus egg cytoplasm, where it becomes assembled into a normal nucleus with functional nuclear envelope (1-4). DNA replication proceeds under normal cell cycle controls, followed by anin vitromitosis in suitable conditions. The cytoplasmic extract can be separated into membrane and soluble fractions that can be supplemented with, or depleted of, specific proteins. Inhibitors and other effectors can be .added to modulate both assembly and transport (5). Using the lectin WGA we have depleted Xenopus cytoplasmic extract of the major nucleoporins, CAN, Nup 98 and p62 and their associated proteins, whose removal effectively inhibits three aspects of nuclear formation, namely NPC formation, nuclear growth, and the reorganisation of the DNA in the depleted nuclei. Adding back these eluted nucleoporins restores normality with respect to nuclear growth, DNA reorganisation and NPC assembly. Current work involves purification of complexes containing these proteins by HPLC to allow add back of the complexes singly and in combination, to characterise their individual roles in NPC assembly, structure and transport (Figures 1,2,3).

Nuclear lamina and nuclear matrix organization in sperm pronuclei assembled in Xenopus egg extract.

Nuclear lamina and matrices were prepared from sperm pronuclei assembled in Xenopus egg extracts using a fractionation and extraction procedure. Indirect immunofluorescence revealed that while chromatin was efficiently removed from nuclei during the extraction procedure, the distribution of lamins was unaffected. Consistent with this data, the amount of lamin B3, determined by immunoblotting, was not affected through the extraction procedure. Nuclear matrices were visualised in DGD sections by TEM. Within these sections filaments were observed both at the boundary of the nucleus (the lamina) and within the body of the nucleus (internal nuclear matrix filaments). To improve resolution, nuclear matrices were also prepared as whole mounts and viewed using field emission in lens scanning electron microscopy (FEISEM). This technique revealed two distinct networks of filaments. Filaments lying at the surface of nuclear matrices interconnected nuclear pores. These filaments were readily labelled with monoclonal anti-lamin B3 antibodies. Filaments lying within the body of the nuclear matrix were highly branched but were not readily labelled with antilamin B3 antibodies. Nuclear matrices were also prepared from sperm pronuclei assembled in lamin B3 depleted extracts. Using FEISEM, filaments were also detected in these preparations. However, these filaments were poorly organised and often appeared to aggregate. To confirm these results nuclear matrices were also observed as whole mounts using TEM. Nuclear matrices prepared from control nuclei contained a dense array of interconnected filaments. Many (but not all) of these filaments were labelled with anti-lamin B3 antibodies. In contrast, nuclear matrices prepared from "lamin depleted nuclei' contained poorly organised or aggregated filaments which were not specifically labelled with anti-lamin B3 antibodies.

Direct observation of iron-induced conformational changes of mitochondrial DNA by high-resolution field-emission in-lens scanning electron microscopy.

When respiring rat liver mitochondria are incubated in the presence of Fe(III) gluconate, their DNA (mtDNA) relaxes from the supercoiled to the open circular form dependent on the iron dose. Anaerobiosis or antioxidants fail to completely inhibit the unwinding. High-resolution field-emission in-lens scanning electron microscopy imaging, in concert with backscattered electron detection, pinpoints nanometer-range iron colloids bound to mtDNA isolated from iron-exposed mitochondria. High-resolution field-emission in-lens scanning electron microscopy with backscattered electron detection imaging permits simultaneous detailed visual analysis of DNA topology, iron dose-dependent mtDNA unwinding, and assessment of iron colloid formation on mtDNA strands.

Xenopus lamin b3 has a direct role in the assembly of a replication competent nucleus: Evidence from cell-free egg extracts

Xenopus egg extracts which assemble replication competent nuclei in vitro were depleted of lamin B3 using monoclonal antibody L6 5D5 linked to paramagnetic beads. After depletion, the extracts were still capable of assembling nuclei around demembranated sperm heads. Using field emission in lens scanning electron microscopy (FEISEM) we show that most nuclei assembled in lamin B3-depleted extracts have continuous nuclear envelopes and well formed nuclear pores. However, several consistent differences were observed. Most nuclei were small and only attained diameters which were half the size of controls. In a small number of nuclei, nuclear pore baskets, normally present on the inner aspect of the nuclear envelope, appeared on its outer surface. Finally, the assembly of nuclear pores was slower in lamin B3-depleted extracts, indicating a slower overall rate of nuclear envelope assembly. The results of FEISEM were confirmed using conventional TEM thin sections, where again the majority of nuclei assembled in lamin B3-depleted extracts had well formed double unit membranes containing a high density of nuclear pores. Since nuclear envelope assembly was mostly normal but slow in these nuclei, the lamin content of 'depleted' extracts was investigated. While lamin B3 was recovered efficiently from cytosolic and membrane fractions by our procedure, a second minor lamin isoform, which has characteristics similar to those of the somatic lamin B2, remained in the extract. Thus it is likely that this lamin is necessary for nuclear envelope assembly. However, while lamin B2 did not co-precipitate with lamin B3 during immunodepletion experiments, several protein species did specifically associate with lamin B3 on paramagnetic immunobeads. The major protein species associated with lamin B3 migrated with molecular masses of 102 kDa and 57 kDa, respectively, on one-dimensional polyacrylamide gels. On two-dimensional O'Farrell gels the mobility of the 102 kDa protein was identical to the mobility of a major nuclear matrix protein, indicating a specific association between lamin B3 and other nuclear matrix proteins. Nuclei assembled in lamin B3-depleted extracts did not assemble a lamina, judged by indirect immunofluorescence, and failed to initiate semi-conservative DNA replication. However, by reinoculating depleted extracts with purified lamin B3, nuclear lamina assembly and DNA replication could both be rescued. Thus it seems likely that the inability of lamin-depleted extracts to assemble a replication competent nucleus is a direct consequence of a failure to assemble a lamina.

The use of field emission in-lens scanning electron microscopy to study the steps of assembly of the nuclear envelope in vitro

At mitosis the nuclear envelope (NE) is disassembled to allow chromosome separation. In telophase it is reassembled as the chromosomes decondense. Cell-free extracts of Xenopus eggs have been used extensively to study assembly of the NE and the nuclear pore complexes (NPCs), providing several models for the steps involved. The NE is a surface structure which in cell-free extracts is easily exposed. It is appropriate, therefore, to use a surface imaging technique to study NE dynamics. Field emission in-lens scanning electron microscopy (FEISEM) provides the opportunity to image surfaces, directly, and to visualise details of structures such as the NPC. Here we show the feasibility and value of FEISEM to study the steps of NE formation. Nuclei have been assembled in vitro and fixed at different time points during assembly, followed by conductive staining, platinum coating, and visualisation by FEISEM. Changes on the nuclear surface with time are shown. Details of the surface of chromatin and the cytoplasmic face of NPC structure are demonstrated without the need to isolate the structures from the nucleus.