Thick Fibers Research Articles

Golgi pH elevation due to loss of V-ATPase subunit V0a2 function correlates with tissue-specific glycosylation changes and globozoospermia

Loss-of-function variants in ATP6V0A2, encoding the trans Golgi V-ATPase subunit V0a2, cause wrinkly skin syndrome (WSS), a connective tissue disorder with glycosylation defects and aberrant cortical neuron migration. We used knock-out (Atp6v0a2−/−) and knock-in (Atp6v0a2RQ/RQ) mice harboring the R755Q missense mutation selectively abolishing V0a2-mediated proton transport to investigate the WSS pathomechanism. Homozygous mutants from both strains displayed a reduction of growth, dermis thickness, and elastic fiber formation compatible with WSS. A hitherto unrecognized male infertility due to globozoospermia was evident in both mouse lines with impaired Golgi-derived acrosome formation and abolished mucin-type O-glycosylation in spermatids. Atp6v0a2−/− mutants showed enhanced fucosylation and glycosaminoglycan modification, but reduced levels of glycanated decorin and sialylation in skin and/or fibroblasts, which were absent or milder in Atp6v0a2RQ/RQ. Atp6v0a2RQ/RQ mutants displayed more abnormal migration of cortical neurons, correlating with seizures and a reduced O-mannosylation of α-dystroglycan. While anterograde transport within the secretory pathway was similarly delayed in both mutants the brefeldin A-induced retrograde fusion of Golgi membranes with the endoplasmic reticulum was less impaired in Atp6v0a2RQ/RQ. Measurement of the pH in the trans Golgi compartment revealed a shift from 5.80 in wildtype to 6.52 in Atp6v0a2−/− and 6.25 in Atp6v0a2RQ/RQ. Our findings suggest that altered O-glycosylation is more relevant for the WSS pathomechanism than N-glycosylation and leads to a secondary dystroglycanopathy. Most phenotypic and cellular properties correlate with the different degrees of trans Golgi pH elevation in both mutants underlining the fundamental relevance of pH regulation in the secretory pathway.

Results of assessing the dynamics of ophthalmological complications in chronic kidney disease patients after kidney transplantation

Objective. The study objective was to investigate the dynamics of opthalmological complications in the non-diabetic end-stage chronic kidney disease in patients after kidney transplantation.Material and methods. A long-term observation was conducted to assess the changes in morphofunctional parameters of eyes in patients of the study group (after kidney transplantation, n=135 (269 eyes)) and the comparison group (continued on hemodialysis, n=81 (162 eyes)) over 18 months. Both general and specialized ophthalmological investigation methods were employed.Results. The observation showed a positive trend in patients after kidney transplantation, which was manifested by reduced corneal and conjunctival calcification. In the comparison group, both an increase and decrease in qualitative signs of retinopathy were seen as based on optical coherence tomography data, while in the study group, most retinopathy signs decreased, indicating a positive trend possibly brought about by the kidney transplantation. Analysis of optical coherence tomography quantitative parameters showed an improvement in central choroidal thickness and retinal nerve fiber layer thickness in the study group.Conclusion. Kidney transplantation in patients with the non-diabetic end-stage chronic kidney disease leads to a reduction in ophthalmological complications both in the anterior eye segment (reduced corneal and conjunctival calcification) and in its posterior segment (improved optical coherence tomography retinal parameters).

Computational analysis of free-corner-induced failure of thick angle-ply composite laminates established upon a global-local model

The complex three-dimensional (3D) state of interlaminar stresses in the vicinity of a free corner in composite laminates brings about delamination, matrix cracking, and overall failure. This study focuses on devising a straightforward and efficient computational framework for analyzing the free-corner-induced failures in mechanically and thermally-loaded thick angle-ply composite laminates based on an innovative global-local finite element model. In so doing, the global region is dealt with by the first-order shear deformation theory, and the local sub-model region near the free corner is scrutinized using the 3D layer-wise theory. Distinctive risk parameters associated with the meso-level damage modes, including ply failure, delamination, and transverse matrix cracking are well-defined under the corresponding criteria. The precision of the model is ensured through verifications in which satisfactory alignment between the current outcomes and those of other available works in the literature substantiates the efficacy of the proposed approach. Furthermore, the impacts of the configuration parameters such as fiber orientation and thickness of plies upon the risk parameters are fully examined. It is found that, generally, by increasing the angle of fibers between two adjacent layers and diminishing the ply thickness, the composite laminate becomes more critical. The matrix cracking mode is dominated regarding the delamination and is in close agreement with the ply failure analysis. The proposed computational infrastructure, occasioning time and financial savings is valuable and enlightening for designing and manufacturing composite structures.

Gender differences in canine anterior chamber dimensions: Potential implications for primary angle-closure glaucoma.

This study aimed to explore anatomical differences in the aqueous humor (AH) outflow pathway between male and female dogs using ultrasound biomicroscopy (UBM). Clinical data were collected from 30 eyes of 30 dogs (15 males: 10 right eyes, 5 left eyes; and 15 females: 7 right eyes, 8 left eyes) treated at the Veterinary Medical Teaching Hospital of Chungbuk National University, South Korea, between August 2018 and February 2024. The study conducted an in-depth UBM examination, specifically observing peripheral anterior chamber depth (ACD), geometric iridocorneal angle (ICA), and angle-opening distance (AOD) alongside measurements of ciliary cleft width (CCW), length (CCL), and area (CCA), and assessed the longitudinal fibers of ciliary muscle thickness (Lf-CMT) and the longitudinal and radial fibers of ciliary muscle thickness (LRf-CMT) for gender-based differences. The study identified a significant sex difference in peripheral ACD, with females displaying shallower depths compared to males, potentially clarifying the higher incidence of glaucoma in female dogs. No significant gender differences were found in ICA, AOD, CC parameters, or ciliary muscle parameters measurements. This research uncovered that peripheral ACD is significantly shallower in females than in males, potentially indicating a risk factor that could contribute to the development of primary angle-closure glaucoma.

An in vivo evaluation of the safety and efficacy of using decellularized bovine parietal peritoneum membranes as dural substitutes

PurposeThe reconstruction of dura matter is a challenging problem for neurosurgeons. A number of materials for dural reconstruction have recently been developed, but some of them have poor biocompatibility, poor mechanical properties, and adverse effects. Bovine parietal peritoneum is a promising natural material for regenerative medicine and reconstructive surgery. In this study, we conducted an in vivo evaluation of the safety and efficacy of using decellularized bovine peritoneum membranes (BPMs) as natural dural substitutes in a rabbit model.MethodsThe dural defects in mature New Zealand rabbits were studied. A BPM was sutured on the dural defect area of each animal. Autologous periosteum and collagen membranes (Lyoplant®) were used to facilitate a comparison with the BPMs. ELISA, histomorphological analysis, and hematological analysis were carried out to examine the safety and efficacy of using BPMs as dural substitutes.ResultsOur results showed that the BPMs demonstrated a deterioration rate that is suitable for gathering newly formed meningothelial tissue. The thickness and density of BPM fibers prevents resorption in the first few days after use as a plastic material, and the regeneration of the dura mater does not occur at an accelerated pace, meaning that the gradual formation of fibrous tissue prevents adhesion to the brain surface. It was observed that the BPM can integrate with the adjacent tissue to repair dural defects. Moreover, the transplantation of BPMs did not cause significant adverse effects or immunological responses, indicating the safety and good biocompatibility of the BPM.ConclusionThus, our in vivo study in a rabbit model showed that decellularized BPMs may represent a biocompatible natural material that can be used in cases requiring dura matter repair without significant adverse effects.

Anatomical and histological analyses of ankle plantar flexors: insights into connective tissue composition and muscle architecture.

The tibialis posterior (TP), flexor digitorum longus (FDL), and flexor hallucis longus (FHL) are muscles that contribute to the stability of foot and ankle movements, playing a crucial role in achieving optimal gait. However, a comprehensive examination of the anatomical characteristics and histological variances of each muscle has not been conclusively established. A total of 10 un-embalmed cadavers were dissected, and muscles from each cadaver were consistently harvested from the musculotendon junction. The ratio of collagen and elastic fibers was assessed through three immunohistological analyses, focusing on distinct histological characteristics in type I (slow twitch) and type II (fast twitch) fibers. Additionally, Ultrasonography was utilized to compare and analyze the thickness, fascicle angle, and muscle fiber length of each muscle. Concerning the relative proportion of elastic fibers to collagen, the TP exhibited the highest collagen content (21.9 ± 0.30%, mean ± standard deviation), while the FHL had the highest elastic fiber proportion (48.4 ± 0.44%). The TP predominantly comprised slow type muscle fibers (36.88 ± 0.83%), whereas the FHL contained a higher density of fast type muscle fibers (32.46 ± 4.02%). US analysis indicated that the thickness of the TP was relatively greater (2.0 ± 0.2mm) compared to the FDL (1.2 ± 0.1mm) and FHL (1.1 ± 0.1mm). Additionally, the fascicle length was notably longer in the TP (25.6 ± 4.1mm). Our anatomical and histological findings indicate that the tibialis posterior (TP) is the thickest with a significant physiological angle and a high collagen content. This characteristic enables the TP to provide stability by transmitting a constant force to the calf. On the other hand, the flexor hallucis longus (FHL) exhibits the highest elastic fiber content, confirming its ability to exert instantaneous, swift, and powerful force.

Initial biological evaluation of nanofiber and microwire biomaterials

Abstract Due to the direct long-term contact with living tissue, the biocompatibility of implants is particularly demanding. In this context, biointegration of implants highly depends on cell colonialization on the surface or in the gap between implant and tissue, as well as cell ingrowth in porous implant structures. Fibrous material is predestined based on two variable parameters, fiber thickness and pore size. Various applications in implant coating, stenting, wound treatment, bone surgery, or cardiovascular field are possible. Coating with cell-friendly material can significantly improve the biocompatibility of the underlying material. In this study, the biocompatibility of medical device samples made of microwire and nanofiber substrates was compared according to ISO 10993-5. In particular, a metal tissue of microwire (stainless steel, 316L) and polymeric nanofiber nonwoven poly-L-lactic acid (PLLA) as well as titanium (Ti) sputtered variants thereof (316L-Ti, PLLA-Ti) were tested in vitro. In order to evaluate their environmental compatibility and their effects on L929 cell line (murine fibroblasts) evaluation was performed via direct contact with 30,000 cells per 48-well in non-adherent plates for 48 h and 96 h. The metabolic activity of cells was determined via CellQuanti-Blue assay, morphological analysis were done using fluorescence staining phalloidin and DAPI. Briefly outlined, microwires were colonized immediately, whereas initially spherical cells settled on nanofiber substrates and later coalesced forming a common cell cluster. The results show independency of structure, ultrathin titanium coating improves cell viability. The findings indicate that the idea of making a surface appealing to cells has potential. It can therefore be assumed that physical vapor deposition (PVD) sputtering of Ti on implant surfaces is a suitable approach to maintain or improve their biocompatibility, regardless of the surface structure of the implants.

Bacterial nanocellulose production: Improvement in productivity and properties via a sustainable medium

High production cost is a significant barrier to commercial bacterial nanocellulose (BNC) production. This study addresses this issue using a low-cost molasses and cheese whey medium via Gluconacetobacter hansenii. The one-factor-at-a-time method investigated the effect of critical factors on BNC production, including total sugar and total protein concentrations (g/L), initial pH, and additives such as ethanol and acetic acid (%(v/v)). The productivity in the HS medium was 0.125 g/L/day, while the low-cost medium without additives achieved a productivity of 0.5275 g/L/day. Although the addition of ethanol decreased the productivity, the inclusion of 0.4 %(v/v) acetic acid increased the productivity to 0.64 g/L/day. Using the low-cost medium with acetic acid led to a 40-fold reduction in production costs compared to the HS medium. Furthermore, transitioning from HS media to the low-cost medium resulted in BNC with thicker fibres, a higher crystallinity index (%) and improved mechanical properties. The ratio of Iα/ Iβ in BNC produced in HS media decreased from 1.68 to 1.09 in the low-cost medium. The thermal properties of BNC produced in the low-cost medium also showed slight improvements compared to those in the HS medium. The degree of polymerization significantly increased from 1096 to 1457 in the low-cost medium compared to HS media. These findings highlight the potential of using a low-cost medium to produce BNC with enhanced properties, offering a sustainable and cost-effective alternative to conventional plastics.

Fibrillin-1 G234D mutation in the hybrid1 domain causes tight skin associated with dysregulated elastogenesis and increased collagen cross-linking in mice

Fibrillin-1, an extracellular matrix (ECM) protein encoded by the FBN1 gene, serves as a microfibril scaffold crucial for elastic fiber formation and homeostasis in pliable tissue such as the skin. Aside from causing Marfan syndrome, some mutations in FBN1 result in scleroderma, marked by hardened and thicker skin which limits joint mobility. Here, we describe a tight skin phenotype in the Fbn1G234D/G234D mice carrying a corresponding variant of FBN1 in the hybrid1 domain that was identified in a patient with familial aortic dissection. Unlike scleroderma, skin thickness and collagen fiber abundance do not change in the Fbn1G234D/G234D mutant skin. Instead, increased collagen cross-links were observed. In addition, short elastic fibers were sparsely located underneath the panniculus muscle layer, and an abundance of thin, aberrant elastic fibers was increased within the subcutaneous fascia, which may have tightened skin attachment to the underlying skeletal muscle. Structurally, Fbn1G234D/G234D microfibrils have a disrupted shoulder region that shares similarities with hybrid1 deletion mutant microfibrils. We then demonstrate the consequence of fibrillin-1 G234D mutation on dermal fibroblast functions. Mutant primary fibroblasts produce fewer elastic fibers, exhibit slower migration and increased cell stiffness. Moreover, secretome from mutant fibroblasts are marked by enhanced secretion of ECM, ECM-modifying enzymes, proteoglycans and cytokines, which are pro-tissue repair/fibrogenic. The transcriptome of mutant fibroblasts displays an increased expression of myogenic developmental and immune-related genes. Our study proposes that imbalanced ECM homeostasis due to a fibrillin-1 G234Dmutation impacts fibroblast properties with potential ramifications on skin function.

Numerical prediction of impact damage in thick fabric composite laminates

A simulation methodology for assessing the damage in thick fabric Carbon Fibre Reinforced Polymer (CFRP) composite laminates under low- and high-velocity impacts is presented. It encompasses steps for calibration, verification, and validation of the elastic and fracture material properties as well as determination of model parameters for the numerical simulations. Damage is modelled using a discrete fracture approach with cohesive interface elements that capture individual cracks occurring in and between plies. For computational efficiency, the method is implemented in a two-dimensional (2D) axi-symmetric model. Results from double-cantilever beam, end-notched flexure, and quasi-static indentation experiments align well with numerical simulations and serve to calibrate and verify the implementation of the discrete fracture approach. The methodology is extended to dynamic impact analysis to predict damage mechanisms, force–displacement histories, and is validated using test results. This methodology combines meaningful insight in the failure mechanisms with a manageable computational effort, achieving a factor 50 improvement compared to a benchmark. A parametric analysis summarised in failure maps relates damage mechanisms to impact energy, mass, and laminate thickness. The proposed methodology strikes a balance between computational efficiency and accuracy, making it a valuable tool for optimum design and certification of thick CFRP composite laminates under impact.

Low-dose tamoxifen treatment reduces collagen organisation indicative of tissue stiffness in the normal breast: results from the KARISMA randomised controlled trial.

Tissue stiffness, dictated by organisation of interstitial fibrillar collagens, increases breast cancer risk and contributes to cancer progression. Tamoxifen is a standard treatment for receptor-positive breast cancer and is also aproved for primary prevention. We investigated the effect of tamoxifen and its main metabolites on the breast tissue collagen organisation as a proxy for stiffness and explored the relationship between mammographic density (MD) and collagen organisation. This sub-study of the double-blinded dose-determination trial, KARISMA, included 83 healthy women randomised to 6months of 20, 10, 5, 2.5, and 1mg of tamoxifen or placebo. Ultrasound-guided core-needle breast biopsies collected before and after treatment were evaluated for collagen organisation by polarised light microscopy. Tamoxifen reduced the amount of organised collagen and overall organisation, reflected by a shift from heavily crosslinked thick fibres to thinner, less crosslinked fibres. Collagen remodelling correlated with plasma concentrations of tamoxifen metabolites. MD change was not associated with changes in amount of organised collagen but was correlated with less crosslinking in premenopausal women. In this study of healthy women, tamoxifen decreased the overall organisation of fibrillar collagens, and consequently, the breast tissue stiffness. These stromal alterations may play a role in the well-established preventive and therapeutic effects of tamoxifen. Trial registration ClinicalTrials.gov ID: NCT03346200. Registered November 1st, 2017. Retrospectively registered.

Optical coherence tomography as an adjunct tool to assess response to treatment in cerebral venous thrombosis: A prospective longitudinal study

IntroductionPapilledema, due to raised intracranial pressure (ICP) is commonly seen in cerebral venous thrombosis (CVT) and can have serious complications. This study reports the quantitative assessment of papilledema through the measurement of the Peripapillary choroidal thickness (ChT) and Peripapillary retinal nerve fiber layer thickness (RNFLT) using optical coherence tomography (OCT). MethodsWe conducted a prospective longitudinal study of 30 subjects with CVT. Age and gender-matched healthy individuals were included as controls. In addition to history, RNFLT and ChT measurements were obtained at presentation, discharge, and follow-up two months after discharge. ResultsThe mean age of the patients was 32.8 ± 9.9 years. Papilledema was seen in 14 (46.66 %) patients. The peripapillary RNFLT and ChT were significantly greater in patients with CVT [RNFLT 121.5 μm (105,169) in the right eye (RE), 120 μm (103,148) in the left eye (LE); ChT 159 μm (143,171) in the RE, 155.5 μm (140,166) in the LE] as compared to controls [RNFLT 106.5 μm (102,111) in RE, 103.5 μm (98,107) in LE; ChT 130 μm (119,134) in RE, 124 μm (119,136) in LE]. There was a significant decrease in the peripapillary RNFLT and ChT in patients with papilledema at follow-up after two months in all segments in both eyes. ConclusionIn patients with CVT, RNFLT, and ChT reduced significantly with treatment. OCT is potentially useful to objectively assess response to treatment in patients with CVT.

Ultrasound-mediated catheter delivery of tissue plasminogen activator promotes thrombolysis by altering fibrin fibre thickness and clot permeability.

It has been proposed that low power, high frequency ultrasound can augment the ability of thrombolytic agents to dissolve clot in patients with venous thromboembolism. We created a bench model to examine what role and mechanism ultrasound may have in this process. Fibrin polymerisation was analysed through modified light-scattering experiments with the inclusion of catheter-mediated ultrasound application. We studied fibrin fibre diameters through scanning electron microscopy of ultrasound treated fibrin clots. Clot porosity was investigated using permeation tests, while fibrinolysis was analysed through lightscattering experiments, and by changes in porosity of lysing clots under flow. Application of ultrasound did not change initial fibrin polymerisation but did induce a reversible change in maximal turbidity of already formed fibrin clots. This change in turbidity was caused by a reduction in fibrin fibre diameter and was associated with an increase in clot porosity. These reversible structural changes were associated with a linear increase in fibrinolysis rates under static conditions, while an exponential increase in rates was observed under flow. The use of ultrasound augmentation of thrombolysis enhances clot dissolution through greater and more rapid fibrin degradation. This is due to conformational change created by the ultrasound in clot structure, a reversible phenomenon that may increase binding sites for lytic agent and could potentially allow the use of lower doses and shorter infusion times of ultrasound-assisted thrombolytic to treat venous thromboembolism in-vivo.

Application risk and value of Cd-enriched poplar wood: Wood properties, leaching characteristics and brown rot resistance

This study investigated the application risk and value of Cd-enriched poplar wood, focusing on its wood properties, leaching characteristics, and brown rot resistance. The results indicated that Cd deposition in cell walls significantly inhibited brown rot fungi, thereby enhancing decay resistance. Furthermore, the extent of improvement in brown rot resistance was linked to wood density: the higher the density of Cd-enriched poplar wood, the stronger its resistance to brown rot. As the Cd concentration increased, the Cd distribution abundance and the wood crystallinity gradually increased. Structural changes were observed, including fluctuating microfibril angle and double wall thickness of fibers and vessels. Cd concentrations exceeding 50 mg/kg altered the chemical composition of the cell walls. The binding form of Cd in wood cell wall showed a trend of bound Cd ＞ free Cd ＞ residual Cd. Cd leaching occurred under cyclic soaking in water, which may lead to secondary contamination. However, under the condition of 75 % relative humidity, Cd leaching was negligible, suggesting potential for safer use in controlled environments. These findings provide valuable insights into the management and application of Cd-enriched wood, especially in contexts where decay resistance is critical or in water-exposed environments.

Electrospinning of LaB6/PEDOT:PSS/PEO Fiber Composites of Unique Morphologies.

We present a direct electrospinning fabrication technique for the manufacture of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/poly(ethylene oxide) (PEDOT:PSS/PEO) polymer fibers containing embedded cubic lanthanum hexaboride (LaB6) particles. We focus on the impact of relative humidity on the formation of uniform polymer fibers and show that a relative humidity of 5% is optimal, resulting in an average fiber thickness of 266 ± 88 nm. As the relative humidity is increased, the fibers contain beads as a consequence of Rayleigh instabilities. The addition of lanthanum hexaboride cubic particles to the polymer solution before electrospinning results in the encapsulation of the LaB6 particles inside the fibers. We investigate the effect of LaB6 particle size on morphology and observe that particles of ∼500 nm yield a fiber-cube-fiber morphology, while 2 μm particles result in fewer embedded cubes along the length of the polymer fibers. This phenomenon likely arises from electrodynamic interactions between the LaB6 particles in the polymer solution and the electric field lines generated during electrospinning between the spinneret and the collector. Our results display the versatility of the electrospinning technique in the fabrication of unique polymer/hexaboride composite fibers.

RAMAN Analysis of Carbonaceous Material and Deduced Peak Metamorphic Temperatures of Metasediments From Western Himalaya, NW Pakistan

ABSTRACTRaman spectroscopy of carbonaceous materials (RSCM) was applied to 10 carbonaceous material (CM) ‐rich low‐ to medium‐grade metasedimentary rock samples of Western Himalaya, Pakistan to assess their optimum thermal evolution. The RSCM thermometry is based on the degree of graphitisation of CM as a function of peak metamorphic temperature. Petrographic observations of the studied samples revealed two dominant CM morphologies. Type‐I CM, represented by fine‐grained discontinuous dust‐like and scattered to thin sporadic layers, was more prevalent in low‐grade metamorphic samples. Type‐II CM, corresponding to continuous and extended thick fibres and elongated grain constellations, was dominant in medium‐ to high‐grade metamorphic samples. The degree of crystallinity of CM and subsequent metamorphic temperatures were quantified by considering the intensity‐based R1 and the area‐based R2 ratio parameters. Low‐grade samples from the Lesser Himalayan Sequence (LHS), having Type‐I CM, resulted in RSCM peak temperatures between 306°C and 403°C. Medium‐ to high‐grade samples from Higher Himalayan Crystalline (HHC), containing Type‐II CM, yielded peak temperatures in the 482°C–560°C range. The extremely deformed sample from a fault zone in the LHS produced relatively higher temperature of 403°C, thereby suggesting heat associated with shearing due to fault activities resulting in CM recrystallisation and elevated temperature values. The study revealed that the peak metamorphic temperatures increase from south towards north following a progressive path of metamorphism in the region.

Quantitative Assessment of Collagen Architecture to Determine Role of Tumor Stroma During Vestibular Schwannoma Progression.

The primary objective was to characterize the abundance and architecture of collagen in the extracellular matrix in vestibular schwannoma (VS). The secondary objective was to investigate the association between collagen architecture and tumor size. Retrospective cohort study. Academic referral center. Tumor samples were obtained from patients with sporadic VS undergoing microsurgical resection. Histological analyses were performed including picrosirius red (PSR) staining under polarized light. Collagen architecture was quantified using an automated fiber detection software. Second Harmonic Generation (SHG) microscopy and immunofluorescence (IF) were utilized to characterize collagen architecture. Eleven tumor specimens were included (mean tumor diameter = 2.80 cm, range 1.5-4.0 cm), and were divided into large (mean diameter = 3.5 ± 0.4 cm) and small (mean tumor diameter = 2.0 ± 0.4 cm) cohorts based on size. The large VS cohort showed significantly higher collagen density (27.65% vs 12.73%, P = .0043), with more thick fibers (mature Type I, 24.54% vs 12.97%, P = .0022) and thin fibers (immature Type I or mature Type III, 23.55% vs 12.27%, P = .026). Tumor volume correlated with greater degree of collagen fiber disorganization (P = .0413, r2 = 0.298). Specifically, collagen type I intensity was significantly higher in large VS compared to small tumors (P < .001) and peripheral nerve (P = .028). Larger VS exhibit increased collagen abundance in the tumor stroma, and a more disorganized collagen architecture compared to smaller VS and normal peripheral nerve tissue. This finding indicates that collagen organization may play a significant role in extracellular matrix remodeling and the progression of VS.

Application of Hybrid Conventional Filter and PVDF-TiO&lt;sub&gt;2&lt;/sub&gt;/SBE Hollow Fibre Membrane for Peat Water Treatment

South Kalimantan-Indonesia is known to have extensive peatlands reaching 15% of a total peatland in Kalimantan. Due to that peat land water is mostly found and claim as abundant water sources. However, based on quality, peat land water has poor characteristic with high natural organic matter content. Therefore, peat water treatment is necessary to treat using effective method such as hybrid conventional filter and membrane using hollow fibre PVDF-TiO2/SBE. This study aims to investigate the variation of media filter thickness and filtration pressure of hollow fibre (HF) PVDF-TiO2/SBE membrane peat water treatment by filtration pre-treatment and HF membrane ultrafiltration. HF PVDF-TiO2/SBE membrane was prepared by wet spinning method using spinneret set up. Hybrid process was divided into two steps: 1) conventional filter as pre-treatment and 2) HF ultrafiltration membrane under cross flow system. The filter media was used in this work is silica sand and activated carbon with varied thickness 30:10 and 10:30 cm. The HF membrane structure was analysed via scanning electron microscopy (SEM) to investigate the membrane morphology. The results show the fabricated HF membrane has a finger like-sponge sandwich structure morphology. In addition, 30:10 cm (silica sand: activated carbon) thickness exhibits TDS and turbidity removal of 92.18 and 61.37%, respectively as conventional filter pre-treatment. In other hand, HF membrane successfully removed TDS and turbidity of peat water up to 98.68% and 92.41% at 2 bar of filtration pressure. The highest permeate flux of HF membrane conducted of 13.055 Kg.m-2.h-1 at 3 bar. Conclusion of this work is the peat water treatment using activated carbon: silica filtration pre-treatment and HF membrane ultrafiltration can provide clean water with maximum turbidity and TDS removal.

Clay Nanosheet-Based Nanocomposite Supramolecular Hydrogel Enabling Rapid, Reversible Phase Transition Only with Visible Light.

High mechanical properties and rapid sol/gel phase transition are mutually exclusive in the hydrogels reported to date, most likely because the 3D crosslinked networks of mechanically robust hydrogels comprise bundled thick fibers that are not rapidly dissociable or formable. Herein, we report a visible light-responsive hydrogel that showed a rapid, reversible sol/gel phase transition despite its relatively high mechanical properties (storage modulus ~103 Pa). To construct its 3D crosslinked network, we used a design strategy analogous to that employed for our highly water-rich yet mechanically robust nanocomposite supramolecular hydrogel ("aqua material"). In this case, multiple poly(ethylene glycol) chains carrying ortho-tetramethoxyazobenzene termini (AzoPEG) were noncovalently crosslinked by clay nanosheets (CNSs) with surface-immobilized β-cyclodextrin units using their seven guanidinium ion (Gu+) pendants (GuCD) via a multivalent salt-bridge. When exposed to visible light at 625 and 450 nm, the azobenzene termini isomerized from trans-to-cis and cis-to-trans, respectively, and were detached from and attached to the surface-immobilized GuCD units. The advantage of this CNS-based nanocomposite supramolecular system is its simple 3D network structure, which forms and breaks rapidly without slow chain entangling and disentangling processes.

Clay Nanosheet‐Based Nanocomposite Supramolecular Hydrogel Enabling Rapid, Reversible Phase Transition Only with Visible Light

AbstractHigh mechanical properties and rapid sol/gel phase transition are mutually exclusive in the hydrogels reported to date, most likely because the 3D crosslinked networks of mechanically robust hydrogels comprise bundled thick fibers that are not rapidly dissociable or formable. Herein, we report a visible light‐responsive hydrogel that showed a rapid, reversible sol/gel phase transition despite its relatively high mechanical properties (storage modulus ~103 Pa). To construct its 3D crosslinked network, we used a design strategy analogous to that employed for our highly water‐rich yet mechanically robust nanocomposite supramolecular hydrogel (“aqua material”). In this case, multiple poly(ethylene glycol) chains carrying ortho‐tetramethoxyazobenzene termini (AzoPEG) were noncovalently crosslinked by clay nanosheets (CNSs) with surface‐immobilized β‐cyclodextrin units using their seven guanidinium ion (Gu+) pendants (GuCD) via a multivalent salt‐bridge. When exposed to visible light at 625 and 450 nm, the azobenzene termini isomerized from trans‐to‐cis and cis‐to‐trans, respectively, and were detached from and attached to the surface‐immobilized GuCD units. The advantage of this CNS‐based nanocomposite supramolecular system is its simple 3D network structure, which forms and breaks rapidly without slow chain entangling and disentangling processes.