Fiber Pattern Research Articles

The Relationship between Consumption Patterns of Macronutrients, Fiber, and Physical Activity with the Incidence of Obesity at Nuris Jember High School

Obesity is one of the global health problems whose incidence is expected to continue to increase every year. Obesity in adolescents is caused by many factors including changes in lifestyle, physical activity, diet with food intake that exceeds the body's needs, improper eating behavior by consuming more fast food, packaged food, and food with unbalanced nutrients. The purpose of this study was to determine the relationship between macronutrient diet, fiber, and physical activity with the incidence of obesity at Nuris Jember High School. This method is an observational study with a case-control design. Sample selection using purpose sampling of as many as 81 respondents consisting of 27 cases and 54 controls. The research instruments used were weight measurement, height, SQ-FFQ form, and PAL. Data were processed using statistical applications using the chi-square test and if not eligible, the Fisher's exact test was performed with a significant value of p less than 0.005. The results of macronutrient consumption patterns and physical activity have a significant relationship with the incidence of obesity (p less than 0.005). While the study could not analyze fiber consumption patterns due to homogeneous results, the existing findings provide a solid foundation for targeted nutrition education programs and public health strategies. This study concludes that there is a relationship between macronutrient consumption patterns and physical activity with the incidence of obesity. This conclusion underscores the importance of balanced diets and regular physical activity in preventing and managing obesity among adolescents.

Fabrication and Customization of Highly Porous PLGA Membranes Utilizing Near‐Field Electrospinning, Thermal Transitions, and Multilayer Strategies

Polymer porous membranes are crucial in various applications, including water filtration, tissue engineering, and drug administration. Conventional far‐field electrospinning (FFES) is widely used for producing polymeric membranes due to its cost‐effectiveness, scalability, and flexibility in using many polymers. However, FFES has limitations in controlling pore form and size, as it produces randomly oriented fibers that lead to inconsistent and noncustomizable pore sizes. To address these limitations, this work combines near‐field electrospinning (NFES) with thermal treatment of polymer fibers and membranes. NFES offers more precise control over fiber placement and alignment, producing well‐defined fiber patterns with consistent and customizable pore sizes without compromising the thickness of membranes. By exploring the interplay between polymer behavior, thermal effects, and capillary action, the differences in pore area under various temperatures and fiber spacings are characterized. Additionally, this study investigates the influence of multilayer infusion on pore size and geometric arrangement by examining multilayer configurations stacked at various angles. The results indicate that increasing the number of layers leads to decreased pore size, while the alignment of infused fibers affects pore shape. This integrated approach enhances control over membrane characteristics, improving the performance and consistency of polymer porous membrane fabrication across various applications.

A versatile 5-axis melt electrowriting platform for unprecedented design freedom of 3D fibrous scaffolds

Melt electrowriting (MEW) is an electrohydrodynamic additive manufacturing technology for the fabrication of precise microfiber scaffold architectures but is so far restricted to printing onto simple collector geometries and, therefore, constrained in design freedom. This is due to current limitations in print head designs, kinematic systems, and software to generate motion commands. We address these aspects by upgrading a low-cost 5-axis kinematic system and complete it with a custom-designed print head and a collector fabrication workflow to enable collision-free MEW onto arbitrarily shaped multicurvature 3D geometries. A universal graphical approach enables generation of Gcodes customized to the 5-axis MEW requirements. The print head is validated by producing polycaprolactone fibers with diameters ranging from 5.6 ± 1.7 µm to 50.7 ± 5.5 µm and by writing both linear and non-linear fiber patterns onto collectors featuring concave and convex surfaces. Stable printing conditions are achieved by continuously reorienting the print head and collector surface perpendicular to each other at a constant working distance. Ultimately, we demonstrate the system’s potential in shaping anatomically relevant scaffold geometries by stacking microfibers onto collectors resembling a trileaflet valve and a bifurcating vessel. This multi-axis MEW platform unlocks exciting avenues towards unprecedented design freedom for MEW scaffolds.

Three-dimensional fiber patterning in the annulus fibrosus can be derived from vertebral endplate topography.

The annulus fibrosus (AF) of the Intervertebral disc (IVD) is composed of concentric lamellae of helically wound collagen fibers. Understanding the spatial variation of collagen fiber orientations in these lamellae, and the resulting material anisotropy, is crucial to predicting the mechanical behavior of the complete IVD. This study builds on a prior model predicated on path-independent displacement of fiber endpoints during vertebral body growth to predict a complete, three-dimensional annulus fibrosus fiber network from a small number of subject-independent input parameters and vertebral endplate topographies obtained from clinical imaging. To evaluate the model, it was first fit to mid-plane fiber orientations obtained using polarized light microscopy in a population of bovine caudal discs for which computed tomography images vertebral endplates were also available. Additionally, the model was used to predict the trajectories based on human lumbar disc geometries and results were compared to previously reported data. Finally, the model was employed to investigate potential disc-related variations in fiber angle distributions. The model was able to accurately predict experimentally measured fiber distributions in both bovine and human discs using only endplate topography and three input parameters. Critically, the model recapitulated previously observed asymmetry between the inclinations of right- and left-handed fibers in the posterolateral aspect of the human AF. Level to level variation of disc height and aspect ratio in the human lumbar spine was predicted to affect absolute values of fiber inclination, but not this asymmetry. Taken together these results suggest that patient-specific distributions of AF fiber orientation may be readily incorporated into computational models of the spine using only disc geometry and a small number of subject-independent parameters.

Numerical Study of Melt-Spinning Dynamic Parameters and Microstructure Development with Ongoing Crystallization.

In response to an investigation on the paths of changes in the crystallization and radial differences during the forming process of nascent fibers, in this study, we conducted numerical simulation and analyzed the changes in crystallization mechanical parameters and tensile properties through a fluid dynamics two-phase model. The model was based on the melt-spinning method focusing on melt spinning, the environment of POLYFLOW, and the method of joint simulation, coupled with Nakamura crystallization kinetics, including the development of process collaborative parameters, stretch-induced crystallization, viscoelasticity, filament cooling, gravity term, inertia, and air resistance. Finally, for nylon 6 BHS and CN9987 resin spinning, the model successfully predicted the distribution changes in temperature, velocity, strain rate tensor, birefringence, and stress tensor along the axial and radial fibers and obtained the variation pattern of fibers' crystallinity along the entire spinning process under different stretching rates. Furthermore, we also explored the effects of spinning conditions, including inlet flow rate, winding speeds, and the extrusion temperature, on the fibers' crystallization process and obtained the influence rules of different spinning conditions on fiber crystallization. Knowing the paths of changes in mechanical performance can provide important guidance and optimization strategies for the future industrial preparation of high-performance fibers.

Polarization-sensitive optical coherence tomography and scleral collagen fiber orientation in osteogenesis imperfecta

Osteogenesis imperfecta (OI), a rare genetic connective tissue disorder, primarily arises from pathogenic variants affecting the production or structure of collagen type I. In addition to skeletal fragility, individuals with OI may face an increased risk of developing ophthalmic diseases. This association is believed to stem from the widespread presence of collagen type I throughout various parts of the eye. However, the precise consequences of abnormal collagen type I on different ocular tissues remain unknown. Of particular significance is the sclera, where collagen type I is abundant and crucial for maintaining the structural integrity of the eye. Recent research on healthy individuals has uncovered a unique organizational pattern of collagen fibers within the sclera, characterized by fiber arrangement in both circular and radial layers around the optic nerve head. While the precise function of this organizational pattern remains unclear, it is hypothesized to play a role in providing mechanical support to the optic nerve. The objective of this study is to investigate the impact of abnormal collagen type I on the sclera by assessing the fiber organization near the optic nerve head in individuals with OI and comparing them to healthy individuals. Collagen fiber orientation of the sclera was measured using polarization-sensitive optical coherence tomography (PS-OCT), an extension of the conventional OCT that is sensitive to materials that exhibit birefringence (axial changes in light refraction). Birefringence was quantified and used as imaging contrast to extract collagen fiber orientation as well as the thickness of the radially oriented scleral layer. Three individuals with OI, exhibiting different degrees of disease severity, were assessed and analyzed, along with seventeen healthy individuals. Mean values obtained from individuals with OI were descriptively compared to those of the healthy participant group. PS-OCT revealed a similar orientation pattern of scleral collagen fibers around the optic nerve head between OI individuals and healthy individuals. However, two OI participants exhibited reduced mean birefringence of the radially oriented scleral layer compared to the healthy participant group (OI participant 1 oculus dexter et sinister (ODS): 0.34°/μm, OI participant 2: ODS 0.26°/μm, OI participant 3: OD: 0.29°/μm, OS: 0.28°/μm, healthy participants: ODS 0.38 ± 0.05°/μm). The radially oriented scleral layer was thinner in all OI participants although within ±2 standard deviations of the mean observed in healthy individuals (OI participant 1 OD: 101 μm, OS 104 μm, OI participant 2: OD 97 μm, OS 98 μm, OI participant 3: OD: 94 μm, OS 120 μm, healthy participants: OD 122.8 ± 13.6 μm, OS 120.8 ± 15.1 μm). These findings imply abnormalities in collagen organization or composition, underscoring the necessity for additional research to comprehend the ocular phenotype in OI.

Identification of multimodal vortex optical orbital angular momentum in multimode fiber speckle patterns

Orbital angular momentum (OAM) multiplexing technology is a highly promising approach that can significantly increase the data capacity of optical communication systems. However, traditional optical communication systems are prone to atmospheric disturbances such as turbulence, which can degrade transmission quality. To mitigate this issue, multimode fibers (MMFs) have been introduced to reduce the impact of turbulence on signals. Moreover, previous studies have primarily focused on the identification of single vortex beams, facing challenges in accurately recognizing multiplexed modes. To address this challenge, this chapter proposes a multi-label image classification optimization algorithm based on transfer learning. By utilizing the pre-trained MobileNet V2 model as a feature extractor, this network structure can accurately identify 8-bit, 16-bit, and 24-bit multiplexed OAM from speckle patterns in multimode fibers, even with small sample datasets, achieving classification accuracies exceeding 95%. This method overcomes the limitations of traditional optical communication systems that are susceptible to atmospheric disturbances, providing new possibilities for long-distance transmission and increased data capacity in optical communication systems.

The clinicopathological and prognostic significance of autonomic nerves in salivary duct carcinoma.

Many researchers have focused on the role of the autonomic nervous system in the tumor microenvironment. Autonomic nerves include the sympathetic and parasympathetic nerves, which are known to induce cancer growth and metastasis. However, in salivary duct carcinoma (SDC), a rare and highly malignant tumor, the issue should be investigated from both biological and therapeutic perspectives. We explored the clinicopathological and prognostic implications of the autonomic nerves in 129 SDCs. Immunohistochemistry was performed to determine the nature of each nerve using antibodies against S100, tyrosine hydroxylase (TH) as a sympathetic marker, and vesicular acetylcholine transporter (VAChT) as a parasympathetic marker. The area of each marker-positive nerve was digitized and evaluated quantitatively. Double immunofluorescence for TH and VAChT was performed in selected cases. The expression of the secreted neurotrophins was also examined. S100-positive nerves were present in the cancer tissue in 94 of 129 cases (72.9%). Among them, TH-positive sympathetic nerves and/or VAChT-positive parasympathetic nerves were identified in 92 cases (97.9%), and 59 cases (62.8%) had TH/VAChT-co-expressing nerves. Double immunofluorescence revealed a mosaic pattern of sympathetic and parasympathetic fibers in co-expressing nerve bundles. The presence of autonomic nerves, regardless of their area, was significantly associated with aggressive histological features, advanced T/N classification, and a poor prognosis, with shorter disease-free and overall survival. There was an association between some tumor immune microenvironment-related markers and the autonomic nerve status, but not the latter and the secreted neurotrophin expression. This study suggests that autonomic nerves might play a role in the progression of SDC.

Patterns of Dietary Energy, Macronutrients, and Fiber Purchased in 21 Canadian Arctic Grocery Stores by Inuit-Defined Season and Community Size Level

Patterns of Dietary Energy, Macronutrients, and Fiber Purchased in 21 Canadian Arctic Grocery Stores by Inuit-Defined Season and Community Size Level

Action of AA9 lytic polysaccharide monooxygenase enzymes on different cellulose allomorphs

Lytic polysaccharide monooxygenase (LPMO)-catalyzed oxidative processes play a major role in natural biomass conversion. Despite their oxidative cleavage at the surface of polysaccharides, understanding of their mode of action, and the impact of structural patterns of the cellulose fiber on LPMO activity is still not fully understood. In this work, we investigated the action of two different LPMOs from Podospora anserina on celluloses showing different structural patterns. For this purpose, we prepared cellulose II and cellulose III allomorphs from cellulose I cotton linters, as well as amorphous cellulose. LPMO action was monitored in terms of surface morphology, molar mass changes and monosaccharide profile. Both PaLPMO9E and PaLPMO9H were active on the different cellulose allomorphs (I, II and III), and on amorphous cellulose (PASC) whereas they displayed a different behavior, with a higher molar mass decrease observed for cellulose I. Overall, the pretreatment with LPMO enzymes clearly increased the accessibility of all types of cellulose, which was quantified by the higher carboxylate content after carboxymethylation reaction on LPMO-pretreated celluloses. This work gives more insight into the action of LPMOs as a tool for deconstructing lignocellulosic biomass to obtain new bio-based building blocks.

Effects of thyroid hormone on monochromatic light combinations mediate skeletal muscle fiber pattern in broilers

It has been shown that monochromatic green light and blue light promote skeletal muscle development in early (P0-P26) and later growth stages (P27-P42), respectively. This study further investigated the effects of monochromatic light combinations on myogenesis and myofiber types transformation in broilers. Here, a total of 252 chicks were exposed to monochromatic light [red (R), green (G), blue (B), or white light (W)], and monochromatic light combination [green and blue light combination (GB), blue and green light combination (BG), red and blue combination (RB)] until P42. Compared with other groups, GB significantly increased body weight, and muscle organ index, both proportions of larger-size myofibers and oxidative myofibers in the pectoralis major (PM) and gastrocnemius muscle (GAS). Meanwhile, GB up-regulated the abundance of oxidative genes MYH7B and MYH1B, transcription factors PAX7 and Myf5, antioxidant proteins Nrf2, HO-1, and GPX4, and the activities of antioxidant enzymes CAT, GPx, and T-AOC, but down-regulated the abundance of glycolytic related genes MYH 1A, MyoD, MyoG, Mstn, Keap1, TNFa, and MDA levels. Consistent with the change of myofiber pattern, GB significantly reduced serum thyroid hormone (TH) levels, up-regulated skeletal muscle deiodinase DIO3 expression and down-regulated deiodinase DIO2 expression, which may directly lead to the reduction of intramuscular TH levels to affect myofiber types transformation. In contrast, the proportion of fast glycolytic muscle fibers increased in the RR with increasing TH levels. After thyroidectomy, the above parameters were inversed and resulted in no significant difference of each color light treatment group. These data suggested that GB significantly increased the proportion of oxidative muscle fibers and antioxidant capacity in skeletal muscle of broilers, which was regulated by TH-DIO2/DIO3 signaling pathway.

Regional structure-function relationships of lumbar cartilage endplates

Cartilage endplates (CEPs) act as protective mechanical barriers for intervertebral discs (IVDs), yet their heterogeneous structure–function relationships are poorly understood. This study addressed this gap by characterizing and correlating the regional biphasic mechanical properties and biochemical composition of human lumbar CEPs. Samples from central, lateral, anterior, and posterior portions of the disc (n = 8/region) were mechanically tested under confined compression to quantify swelling pressure, equilibrium aggregate modulus, and hydraulic permeability. These properties were correlated with CEP porosity and glycosaminoglycan (s-GAG) content, which were obtained by biochemical assays of the same specimens. Both swelling pressure (142.79 ± 85.89 kPa) and aggregate modulus (1864.10 ± 1240.99 kPa) were found to be regionally dependent (p = 0.0001 and p = 0.0067, respectively) in the CEP and trended lowest in the central location. No significant regional dependence was observed for CEP permeability (1.35 ± 0.97 * 10−16 m4/Ns). Porosity measurements correlated significantly with swelling pressure (r = −0.40, p = 0.0227), aggregate modulus (r = −0.49, p = 0.0046), and permeability (r = 0.36, p = 0.0421), and appeared to be the primary indicator of CEP biphasic mechanical properties. Second harmonic generation microscopy also revealed regional patterns of collagen fiber anchoring, with fibers inserting the CEP perpendicularly in the central region and at off-axial directions in peripheral regions. These results suggest that CEP tissue has regionally dependent mechanical properties which are likely due to the regional variation in porosity and matrix structure. This work advances our understanding of healthy baseline endplate biomechanics and lays a groundwork for further understanding the role of CEPs in IVD degeneration.

Long-range projections of oxytocin neurons in the marmoset brain.

The neurohormone oxytocin (OT) has become a major target for the development of novel therapeutic strategies to treat psychiatric disorders such as autism spectrum disorder because of its integral role in governing many facets of mammalian social behavior. Whereas extensive work in rodents has produced much of our knowledge of OT, we lack basic information about its neurobiology in primates making it difficult to interpret the limited effects that OT manipulations have had in human patients. In fact, previous studies have revealed only limited OT fibers in primate brains. Here, we investigated the OT connectome in marmoset using immunohistochemistry, and mapped OT fibers throughout the brains of adult male and female marmoset monkeys. We found extensive OT projections reaching limbic and cortical areas that are involved in the regulation of social behaviors, such as the amygdala, the medial prefrontal cortex, and the basal ganglia. The pattern of OT fibers observed in marmosets is notably similar to the OT connectomes described in rodents. Our findings here contrast with previous results by demonstrating a broad distribution of OT throughout the marmoset brain. Given the prevalence of this neurohormone in the primate brain, methods developed in rodents to manipulate endogenous OT are likely to be applicable in marmosets.

Probing the complexity of wood with computer vision: from pixels to properties.

We use data produced by industrial wood grading machines to train a machine learning model for predicting strength-related properties of wood lamellae from colour images of their surfaces. The focus was on samples of Norway spruce (Picea abies) wood, which display visible fibre pattern formations on their surfaces. We used a pre-trained machine learning model based on the residual network ResNet50 that we trained with over 15 000 high-definition images labelled with the indicating properties measured by the grading machine. With the help of augmentation techniques, we were able to achieve a coefficient of determination (R2) value of just over 0.9. Considering the ever-increasing demand for construction-grade wood, we argue that computer vision should be considered a viable option for the automatic sorting and grading of wood lamellae in the future.

A vat photopolymerization process for structures reinforced with spatially steered flexible fibers

We present a modified vat photopolymerization process for realizing novel fiber-reinforced composite parts wherein continuous fibers are selectively positioned and oriented across multiple layers along the build direction. This is in contrast to laminates and fiber-wound parts made by repeating fiber patterns; and additively manufactured parts with fibers inserted a posteriori or co-extruded selectively. Our process endows two benefits to the parts made with it: (i) spatially steered fibers embedded along specific paths inside to increase stiffness and strength; and (ii) in-situ fiber-matrix interface concurrently cured with matrix material as opposed to the matrix-matrix interface that exists in co-extruded fibers. The process is enabled by a robot manipulator that guides the fiber in each layer by incrementally orienting it along the tangential direction to the bespoke path. The robot arm and the end-effector do not obstruct the UV light source as they pull the fiber taut from afar in multiple directions to alleviate the undesirable effects of shadows. The robot arm is integrated with the build platform and the UV projector, and the entire process is automated. Examples that illustrate making parts with single and multiple fibers are presented to show the efficacy of the process and the machine. An example is shown with continuous fibers embedded along a few spatially varying principal-stress-flow paths inside a part to improve its stiffness and strength. An increase of 71 % in stiffness and 90 % in strength of the part is observed at fiber volume fraction as small as 0.39 %.

Association between dietary pattern and Helicobacter pylori infection at Queen Elizabeth Hospital, Kota Kinabalu: A case-control study

BackgroundLimited studies have reported the association between dietary patterns and Helicobacter pylori (H. pylori) infection in Sabah. ObjectiveThe purpose of this study was to assess the association between dietary pattern and H. pylori infection among patients aged 18 years and above that went for first esophagogastroduodenoscopy (OGDS) in 2021 at Queen Elizabeth Hospital (QEH), Kota Kinabalu. MethodsDietary intake of positive H. pylori was compared with healthy subjects by using questionnaire adapted from Malaysian Adult Nutrition Survey (MANS) 2014. Using logistic regression models, we evaluated the association between dietary pattern and H. pylori infection risk. FindingsOur finding identified four dietary patterns, namely “high carbohydrate pattern”, “high fiber pattern”, “high fat/cholesterol pattern” and “high salt pattern”. After adjustment for potential confounders, the highest quartile of “high salt pattern” showed greater odds of H. pylori infection (OR = 1.26; 95% Cl: 1.032–1.459; P = 0.045) than lowest quartile, while highest quartile of “high fiber pattern” demonstrated lower odd of the infection (OR = 0.69; 95% Cl: 0.537–0.829; P = 0.008) than those in lowest quartile. If compared with Recommended Nutrient Intake (RNI) 2017, positive H. pylori consumed high carbohydrates and sodium with insufficient fiber intake. ConclusionTo conclude, “high fiber pattern” lowers the risk of H. pylori infection while “high salt pattern” increases the infection risk. Our study also highlighted the importance of nutrient intake within daily allowances.

Modeling and experimental investigations of mechanical properties of hybrid composite rods with gradient composition

The concept of creating a functionally gradient material characterized by a smooth change in composition was used in the fabrication of hybrid composite rods. A hybrid core structure with a glass fiber core and a carbon fiber shell was adopted as the basis. To reduce the risk of delamination at the core-shell interface, a gradual transition was implemented from the core of the rod, made based on high-modulus fiber, to the outer shell composed of low-modulus fiber. The strength and modulus of elasticity in bending for hybrid composite rods were modeled. Using the proposed model, an optimal scheme for distributing glass and carbon fibers across the cross-section of a composite rod was selected. Hybrid composite rods with a diameter of 25 mm, with the same matrix (31±0,1%) and fiber (69±0,1%) content, but with different distribution patterns of glass and carbon fibers along the cross-section, were manufactured via pultrusion technique. The bending strength and stiffness characteristics of composite rods were experimentally determined. Mechanical properties of rods with different reinforcement schemes were compared: homogeneous, core-shell, single, and double gradient. The results indicate that a hybrid rod with a gradient reinforcement scheme exhibits higher values of strength and modulus of elasticity during bending. The modulus of elasticity of the rod with the "double gradient" structure was 103 GPa, for comparison, the modulus of elasticity of the rod made by the "core-shell" scheme was 82 GPa. The simulation aligns well with the experimental data.

Abstract 5149: Extracellular matrix remodeling in metastatic mismatch repair deficient endometrial cancer:Implications for immune checkpoint inhibitor response prediction

Abstract Mismatch repair deficient (MMRd) status is a predictive biomarker for Immune checkpoint inhibitors (ICI) in endometrial cancer (EC), however, half of these patients (pts) do not respond. Most studies exploring biomarkers of response to ICI have focused on tumor or immune cell factors. We aimed to describe the extracellular matrix components of the tumor microenvironment (TME) in ICI-Responder (R) versus Non-Responder (NR) MMRd EC pts to identify new predictive biomarkers of response. Clinical data and outcomes of metastatic MMRd EC pts, treated with ICI (2016-2021), were retrospectively collected. Pts were classified as Rs (CR, PR, or SD ≥12 months) or NRs (PD or SD <12 months). Pre-ICI FFPE tumor samples were subjected to Biognosys UltraDeep TrueDiscovery™ Mass Spectrometry (MS) for identification of differentially regulated protein expression between R and NR. Criteria for protein candidate selection were p-value < 0.01 and average absolute log2 fold change (AVG Log ratio) > 0.58. Collagen was visualized on whole slides using Masson’s trichrome and quantified by Qupath. Collagen density was expressed as % positive surface in the intratumoral area. Second-harmonic generation (SHG) microscopy plus polarimetry (p-SHG) was used to estimate collagen content and describe the spatial orientation of fibrillar collagen in the intratumoral area. intraepithelial (ie) and stromal (s) CD3+ and CD8+ cells were quantified by Qupath. Non-parametric t-tests and Spearman’s rank coefficient (r) for linear correlation were used. Twenty-five tumor samples were included in the analysis: 17 from Rs and 8 from NRs. MS identified collagen type V alpha-2 (AVR Log ratio 2.9, p 0.008) and type XXII alpha-1 chains (AVR Log ratio 1.14, p 0.006) as significantly upregulated in NRs. Using spatial imaging, collagen density in the intratumoral area was significantly higher in NRs (median: 14.2% vs 4.6%, p 0.01). Intratumoral collagen density was positively correlated with collagen type V expression (r 0,54, p 0.016), and negatively correlated with ie and s CD3+ cell (r -0.39, p 0.054; r -0.4, p 0.048, respectively) and ie and s CD8+ cell (r -0.39, p 0.053; and r -0.29, p 0.166) infiltration. SHG confirmed that fibrillar collagen content in the tumor area was significantly greater in NRs (p 0.02). p-SHG revealed that NR tumors tended to show a highly disorganized collagen matrix. In contrast, a linear collagen pattern was associated with response to ICI: 89% of tumors displaying this pattern were Rs. Both MS and two different spatial approaches consistently demonstrated that increased collagen expression or density may serve as a potential predictive biomarker of resistance to ICI in MMRd metastatic EC, contributing to create an immunosuppressive TME. The spatial orientation pattern of collagen fibers may also be crucial in shaping immune TME and influencing the response to ICI. Citation Format: Juan Francisco Grau, Carole Aimé, Martin Mehnert, Elisa Yaniz-Galende, Catherine Genestie, Audrey Le Formal, Elodie Edmond, Antoine Amaury Lachaud, Patricia Pautier, Judith Michels, Sébastien Gouy, Amandine Maulard, Emeline Colomba-Blameble, Felix Blanc-Durand, Marie-Claire Schanne-Klein, Alexandra Leary. Extracellular matrix remodeling in metastatic mismatch repair deficient endometrial cancer:Implications for immune checkpoint inhibitor response prediction [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2024; Part 1 (Regular Abstracts); 2024 Apr 5-10; San Diego, CA. Philadelphia (PA): AACR; Cancer Res 2024;84(6_Suppl):Abstract nr 5149.

Polarization-Sensitive OCT Imaging of Scleral Abnormalities in Eyes With High Myopia and Dome-Shaped Macula

The relevance of visualizing scleral fiber orientation may offer insights into the pathogenesis of pathologic myopia, including dome-shaped maculopathy (DSM). To investigate the orientation and density of scleral collagen fibers in highly myopic eyes with and without DSM by polarization-sensitive optical coherence tomography (PS-OCT). This case series included patients with highly myopic eyes (defined as a refractive error ≥6 diopters or an axial length ≥26.5 mm) with and without a DSM examined at a single site in May and June 2019. Analysis was performed from September 2019 to October 2023. The PS-OCT was used to study the birefringence and optic axis of the scleral collagen fibers. The orientation and optic axis of scleral fibers in inner and outer layers of highly myopic eyes were assessed, and the results were compared between eyes with and without a DSM. A total of 72 patients (51 [70.8%] female; mean [SD] age, 61.5 [12.8] years) were included, and 89 highly myopic eyes were examined (mean [SD] axial length, 30.4 [1.7] mm); 52 (58.4%) did not have a DSM and 37 (41.6%) had a DSM (10 bidirectional [27.0%] and 27 horizontal [73.0%]). Among the 52 eyes without DSM, the 13 eyes with simple high myopia had primarily inner sclera visible, displaying radially oriented fibers in optic axis images. In contrast, the entire thickness of the sclera was visible in 39 eyes with pathologic myopia. In these eyes, the optic axis images showed vertically oriented fibers within the outer sclera. Eyes presenting with both horizontal and bidirectional DSMs had clusters of fibers with low birefringence at the site of the DSM. In the optic axis images, horizontally or obliquely oriented scleral fibers were aggregated in the inner layer at the DSM. The vertical fibers located posterior to the inner fiber aggregation were not thickened and appeared thin compared with the surrounding areas. This study using PS-OCT revealed inner scleral fiber aggregation without outer scleral thickening at the site of the DSM in highly myopic eyes. Given the common occurrence of scleral pathologies, such as DSM, and staphylomas in eyes with pathologic myopia, recognizing these fiber patterns could be important. These insights may be relevant to developing targeted therapies to address scleral abnormalities early and, thus, mitigate potential damage to the overlying neural tissue.

Effects and mechanisms of acupuncture analgesia mediated by afferent nerves in acupoint microenvironments.

In the past few decades, the use of acupuncture analgesia in clinical practice has increased worldwide. This is due to its various benefits, including natural alleviation of pain without causing various adverse effects associated with non-steroidal anti-inflammatory drugs (NSAID) and opioids. The acupoint represents the initial site of acupuncture stimulation, where diverse types of nerve fibers located at the acupoint hold significant roles in the generation and transmission of acupuncture-related information. In this study, we analyzed the patterns and mechanisms of acupuncture analgesic mediated by acupoint afferent fibers, and found that acupuncture stimulates acupoints which rapidly and directly induces activation of high-density primary afferent fibers under the acupoints, including myelinated A fibers and unmyelinated C fibers. During acupuncture stimulation at the muscle layer, the analgesic effects can be induced by stimulation of A fiber threshold intensity. At the skin layer, the analgesic effects can only be produced by stimulation of C fiber threshold intensity. Electroacupuncture (EA) activates A fibers, while manual acupuncture (MA) activates both A and C fibers. Furthermore, acupuncture alters acupoint microenvironments, which positively modulates afferent fibers, enhancing the transmission of analgesic signals. In addition to local activation and conduction at acupoints, nerve fibers mediate the transmission of acupuncture information to pain centers. In the spinal cord, acupuncture activates neurons by inducing afferent fiber depolarization, modulating pain gating, inhibiting long-term potentiation (LTP) of the spinal dorsal horn and wide dynamic range (WDR) neuronal activities. At higher nerve centers, acupuncture inhibits neuronal activation in pain-related brain regions. In summary, acupuncture inhibits pain signal transmission at peripheral and central systems by activating different patterns of afferent fibers located on various layers of acupoints. This study provides ideas for enhancing the precise application and clinical translation of acupuncture.