Fiber Diameter Distribution Research Articles

Utilizing polydispersity in three-dimensional random fibrous based sound absorbing materials

The distribution of fiber diameters plays a crucial role in the transport and sound absorbing properties of a three-dimensional random fibrous (3D-RF) medium. Conventionally, volume-weighted averaging of fiber diameters has been utilized as an appropriate microstructural descriptor to predict the static viscous permeability of 3D-RF media. However, the long wavelength acoustical properties of a 3D-RF medium are also sensitive to the smallest fibers, this is particularly true in the high-frequency regime. In our recent research, we demonstrated that an inverse volume-weighted averaging of fiber diameters can effectively serve as a complementary microstructural descriptor to capture the high-frequency behavior of polydisperse fibrous media. In the present work, we reexamine the identification of two representative volume elements (RVEs) which relies on the reconstruction of 3D-RF microstructures having volume-weighted and inverse-volume weighted averaged fiber diameters, respectively in the low-frequency and high frequency regimes. We investigate the implication of such a weighting procedure on the transport and sound absorbing properties of polydisperse fibrous media, highlighting their potential advantages. Furthermore, we discuss the challenges associated with this research field. Finally, we provide a brief perspective of the future directions and opportunities for advancing this area of study.

Fabrication of gallic acid containing poly(vinyl alcohol)/chitosan electrospun nanofibers with antioxidant and drug delivery properties.

Chitosan-based nanofibers with excellent properties are attractive materials for specific industrial applications of contemporary interest. This work aims to fabricate functional nanofibers based on poly(vinyl alcohol)/chitosan (CS) with an antioxidant and model drug molecule, gallic acid (GA), by electrospinning, followed by cross-linking through glutaraldehyde (PVA-CS-GAs). PVA-CS-GAs were electrospun at two different concentrations by the adjustment of the CS feeding ratio. The detailed characteristics of the as-prepared electrospun nanofibers were elucidated by Fourier Transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), water contact angle (WCA) measurements, thermogravimetric and differential scanning calorimetry (TGA and DSC) analyses. SEM images indicated that the average fiber diameter distribution was in the range of 90-110nm. The results show that morphology, mean diameter, wettability, and thermal characteristics of the composite nanofibers were affected by the CS feeding ratio. Although the increase in the amount of polar -OH groups with the addition of GA caused an improvement in the hydrophilicity and thermal stability of the electrospun nanofibers, it also caused a decrease in the thermal transition temperatures. Furthermore, antioxidant tests based on DPPH radical scavenging ability and in vitro release studies demonstrated that the cross-linked PVA-CS-GA composite nanofibers have good antioxidant activity and a pH-dependent drug release rate, indicating their potential for implementation in wound healing and drug delivery applications.

Preparation and characterization of poly(vinyl pyrrolidone)/cellulose nanofiber/Aloe Vera composites as a biocompatible hydrating facial mask

This study aimed to enhance the properties of polyvinylpyrrolidone (PVP) for use as biocompatible facial masks. To achieve this, nanofibers were developed by blending PVP with cellulose nanofibers (CNFs) and Aloe vera (AV) powder using electrospinning. The results showed that incorporating CNFs and AV into the PVP matrix led to the formation of smooth and uniform nanofibers. In particular, adding 3–6 wt% AV powder in PVP/CNF composites improved fiber diameter distribution and uniformity compared to pure PVP. The PVP/CNF/AV nanofibers exhibited desirable properties for facial mask applications. They displayed 86–93 % porosity, which allowed for efficient moisture absorption capacity of up to 1829 %, and excellent water vapor permeability rate of 3.92 g/m2h. The mechanical properties of the electrospun nanofiber composites were evaluated through tensile testing. The results showed that Young's modulus values decreased progressively with the addition of CNFs and AV powder to the PVP polymer matrix, indicating a plasticizing effect that enhances flexibility. The fracture strain remained similar across all composites, suggesting that CNFs and AV did not significantly weaken the PVP matrix. The tensile strength initially increased with CNF addition but decreased with incremental AV loading. Biocompatibility studies revealed that all nanofibers exhibited excellent fibroblast viability, surpassing 98 %. This indicates that incorporating CNFs and AV did not compromise cell viability, further highlighting the suitability of the PVP/CNF/AV composites for facial mask applications.

Deep trapped bipolar heterocharges enable electret nanofibrous membranes for high-efficiency PM0.3 filtration

Recently frequent global pandemic outbreak triggers the demand of high-efficiency aerosol filtration materials. Most of traditional electret air filters can hardly achieve high efficiency (>99.99 %) due to limited charge density and inappropriate charge distribution. The influence mechanism of nanofibers bipolar heterocharge configuration on electrostatic capture of airborne particles is still confusing. Herein, a novel strategy to create high-efficiency air filters based on electret nanofibrous membranes with deep trapped heterocharge is reported. Space charges and dipole charges with opposite polarity are formed in electrospun membranes composed of different polymers under in-situ charge injection and electric poling during electrospinning. Nanoscale spatial surface potential mapping on individual nanofiber characterized by Kelvin probe force microscopy demonstrates bipolar heterocharge distribution. Numerical simulation shows that fiber heterocharge distribution endows the electret membrane with greater electrostatic field intensity gradient, resulting in stronger electrostatic force between nanofibers and airborne particles. With bipolar heterocharge configuration and bimodal fiber diameter distribution, the nanofibrous membranes exhibit high-efficiency low-resistance filtration property against 0.3 μm NaCl particles (99.994 %, 97.4 Pa) at 5.3 cm s−1. Furthermore, benefiting from charges with deep trap energy of 1.12 eV, the membranes still maintain 99.972 % filtration efficiency after 40 h exposure in 95 % relatively humidity. The prepared membranes brings new insight in the design of high-efficiency and long-term stability air filtration materials for public health precaution. This study not only reveals influence mechanism of nanofibers heterocharge distribution on electrostatic attraction, but also provides useful guidance for fiber charge configuration design to improve aerosol filtration performance of electret filters.

Fenton-Based Treatment of Flax Biomass for Modification of Its Fiber Structure and Physicochemical Properties

The availability of a sustainable technique for degumming lignocellulose fibers is a challenge for the fiber processing industry. Removal of non-cellulosic content from lignocellulose fibers is essential for improving their mechanical and chemical properties, which makes the fibers more suitable for various applications. Herein, a catalytic Fenton-based oxidation process was employed to isolate microcellulose fibers from raw flax fibers. Various complementary methods such as FT-IR/NMR spectroscopy and TGA were used to obtain insight into the thermal behavior of the treated fibers. The morphology of the fibers was studied using Scanning Electron Microscopy (SEM), whereas the surface chemical properties of the fibers was evaluated by a dye-based adsorption method, along with a potentiometric point-of-zero-charge method. To obtain fibers with suitable properties, such as uniform fiber diameter, several Fenton reaction parameters were optimized: pH (7), reaction time (15 h), iron sulfate (2 wt.%), and hydrogen peroxide (10 wt.%). The results indicate that, under the specified conditions, the average diameter of the raw fibers (12.3 ± 0.5 µm) was reduced by 58%, resulting in an average diameter of 5.2 ± 0.3 µm for the treated fibers. We demonstrate that the treated fibers had a lower dye adsorption capacity for methylene blue, consistent with the smoother surface features of the treated fibers over the raw flax fibers. Overall, this study contributes to utilization of the Fenton reaction an efficient oxidation technique for the production of lignocellulose fibers with improved physicochemical properties, such as reduced fiber diameter distribution, in contrast with traditional alkali-based chemical treatment.

Experimental and CFD analysis of fluid flow through nanofiber filter media

This work presents a novel approach to investigating the slip effect in nanofiber filter media. Electrospun nanofiber media with high efficiency and low pressure drop were produced at different concentrations and durations. The surface and cross-sectional morphology of nanofiber media were studied using FE-SEM. Fiber orientation and diameter distributions were also examined. The 3D virtual nanofiber media was modeled using this information along with the experimentally measured porosity and thickness of the media. The effect of the slip phenomenon in nanofiber media was studied numerically, and the results were compared to experimental data. Excellent agreements were found between the measured and simulation results. Additionally, filtration simulations considering aerosols injected with airflow through the nanofibrous filter media were conducted by considering the slip effect, and the effect of filter structure on filtration performance (removal efficiency and pressure drop) was investigated.

Preparation of β-cyclodextrin/PVDF composite films for efficient adsorption of Cu2+

Water pollution issues are becoming more and more serious, particularly those caused by heavy metal ions. In this paper, β-cyclodextrin (β-CD) and polyvinylidene fluoride (PVDF) were chosen to prepare composite films by electrospinning technology. The microstructure, crystalline phases, mechanical properties, porosity, and adsorption performance of β-CD/PVDF composite films were analyzed. The results show that the β-CD/PVDF composite fibers were smooth and randomly deposited to form an interconnected three-dimensional network structure. The diameter of the β-CD/PVDF composite fibers ranged from 0.22 to 0.33 μm, and the fiber diameter distribution was uniform. The maximum porosity was 79.56% when the content of β-CD was 2%. After adding the β-CD, the tensile strength increased to 13.33 MPa and the elongation at break increased to 14.20% as well. With the β-CD content increasing, the adsorption capacity of the β-CD/PVDF composite films for Cu2+ increased to 182.65 mg g−1. In addition, the second-order kinetic model was suitable to describe the adsorption process, and the chemical adsorption was the predominant mechanism of the adsorption process due to the presence of β-CD. The results suggest that the β-CD/PVDF composite films may be a potential adsorbent for Cu2+ adsorption.

Central Composite Design and Response Surface Methodology for Optimizing the Diameter of Electrospun Polyamide-6,6 Nanofiber Mat

Electrospinning is a well-established technique for creating submicron polymer fibers to create distinctive functional nanostructures. Electrospinning parameters including solution concentration, tip-to-collector distance and applied voltage are adjusted to produce nonwovens with variable fiber diameter distributions. This research on the response surface methodology (RSM) is being used to model the diameter of a polyamide-6,6 (PA-6,6) nanofiber mat. The experiments were designed using central composite design (CCD) and RSM, which evaluated the interactions between the operating variables (polymer concentration, applied positive voltage, needle tip to collector distance and spinning angle) on the diameter of the PA-6,6 nanofiber. The average nanofiber diameter increased as the concentration of the PA-6,6 polymer solution increased. The model’s strong regression coefficient ([Formula: see text]) reveals that it did a desirable of predicting the diameter of PA-6,6 fibers. The experimental findings and predicted fiber diameters were in good agreement. The results demonstrate that the optimization of electrospinning process to produce the smallest nanofibers and narrowest diameter distribution ([Formula: see text]) combined effects of 10% polymer concentration, 21[Formula: see text]kV applied positive voltage, 18[Formula: see text]cm needle tip to collector distance and 60[Formula: see text] spinning angle are substantial interacting effects that have an impact on the surface response nanofibers. The results of the research and several mathematical models will offer useful guidelines for choosing parameter settings for electrospinning PA-6,6 to achieve the required fiber diameter. By saving time, effort and money more effectively, this research will expand the field of investigation for the quality of electrospun nanofibers.

Effect of Electrospinning Parameters on the Morphological and Thermal Properties of ABS/ENR Electrospun Fibres

The electrospun of the Acrylonitrile-butadiene-styrene (ABS) blend with epoxidized natural rubber (ENR) is fabricated using the electrospinning technique. Research shows that ABS/ENR electrospun fibres have not been studied. The effects of electrospinning parameters were investigated to determine a significant effect on the microstructure, surface roughness, fibre diameter, and fibre distribution of the electrospun membranes. Sample preparation is made straightforwardly by dissolving ABS and ENR in acetone solvent using a magnetic stirrer. In this research, there are two solution parameters being studied: the ABS/ENR solution concentration (15 to 25 wt.%) and the ratio of ENR (100:0, 70:30, 50:50). Meanwhile, process parameters that are being studied are applied voltage (15 kV to 30 kV) and distance from syringe tip to collector (5cm to 15cm). FTIR results showed that hydrogen bond interaction occurs between ABS and ENR. According to the SEM images, micrometre and sub-micrometre fibres with a smooth surface and bead formation were produced at a concentration of 25%, a ratio of 70:30, a voltage of 30kV, and a distance of 15cm. The diameter of electrospun fibres increases with increasing solution concentration, ranging from 400 nm to 4.5 µm. The diameter of the electrospun fibres decreased with the addition of ENR, increasing voltage, and tip-to-collector distance. TGA results showed that ABS/ENR blends gave higher degradation temperature (393.7°C) than pure ABS (368.8°C), which enhanced thermal stability.

Computational models of compound nerve action potentials: Efficient filter-based methods to quantify effects of tissue conductivities, conduction distance, and nerve fiber parameters.

Peripheral nerve recordings can enhance the efficacy of neurostimulation therapies by providing a feedback signal to adjust stimulation settings for greater efficacy or reduced side effects. Computational models can accelerate the development of interfaces with high signal-to-noise ratio and selective recording. However, validation and tuning of model outputs against in vivo recordings remains computationally prohibitive due to the large number of fibers in a nerve. We designed and implemented highly efficient modeling methods for simulating electrically evoked compound nerve action potential (CNAP) signals. The method simulated a subset of fiber diameters present in the nerve using NEURON, interpolated action potential templates across fiber diameters, and filtered the templates with a weighting function derived from fiber-specific conduction velocity and electromagnetic reciprocity outputs of a volume conductor model. We applied the methods to simulate CNAPs from rat cervical vagus nerve. Brute force simulation of a rat vagal CNAP with all 1,759 myelinated and 13,283 unmyelinated fibers in NEURON required 286 and 15,860 CPU hours, respectively, while filtering interpolated templates required 30 and 38 seconds on a desktop computer while maintaining accuracy. Modeled CNAP amplitude could vary by over two orders of magnitude depending on tissue conductivities and cuff opening within experimentally relevant ranges. Conduction distance and fiber diameter distribution also strongly influenced the modeled CNAP amplitude, shape, and latency. Modeled and in vivo signals had comparable shape, amplitude, and latency for myelinated fibers but not for unmyelinated fibers. Highly efficient methods of modeling neural recordings quantified the large impact that tissue properties, conduction distance, and nerve fiber parameters have on CNAPs. These methods expand the computational accessibility of neural recording models, enable efficient model tuning for validation, and facilitate the design of novel recording interfaces for neurostimulation feedback and understanding physiological systems.

Making fibers from cellulose derivatives by pressurized gyration and electrospinning

Cellulose derivatives are obtained from renewable sources, making them an environmentally friendly option in many industrial applications. Manufacturing fine cellulose fibers is confronted with multifaceted challenges due to cellulose's intricate nature, such as its highly organized structure and hydrogen bonding chain. In this study, for the first time, fibers in the nanometer to micrometer scale diameter from cellulose derivatives were successfully produced without the assistance of polymer precursors using the pressurized gyration (PG) technique. The cellulose derivatives investigated in this work were ethyl cellulose (EC) and cellulose acetate (CA), representing the ether and ester cellulose derivatives, respectively. Electrospinning (ES) technique was also used to compare the fibers produced by this technique with those produced by PG. Both PG and nozzle-PG succeeded in producing EC-based fibers with diameters ranging from 488 to 825 nm, with a higher production rate than ES. In contrast, ES succeeded in producing bead-free fibers from EC and CA with a wide range of solvent systems and concentrations. Scanning electron microscopy was used to analyze the fiber morphology, diameter distribution, and alignment. Additionally, Fourier transform infrared spectroscopy, x-ray diffraction, and differential scanning calorimetry were used to compare the physicochemical nature of the fibers produced by PG and ES. These tests revealed that the fibers produced from the two spinning methods had identical physicochemical structures and properties. With further research and development efforts, PG has the potential to be a promising technique for producing cellulose derivative-based fibers with a high production rate, which could be employed for applications in drug delivery, tissue engineering, and wound dressing.

Microscopy of Woven and Nonwoven Face Covering Materials: Implications for Particle Filtration.

A suite of natural, synthetic, and mixed synthetic-natural woven fabrics, along with nonwoven filtration layers from a surgical mask and an N95 respirator, was examined using visible light microscopy, scanning electron microscopy, and micro-X-ray computed tomography (µXCT) to determine the fiber diameter distribution, fabric thickness, and the volume of solid space of the fabrics. Nonwoven materials exhibit a positively skewed distribution of fiber diameters with a mean value of ≈3 μm, whereas woven fabrics exhibit a normal distribution of diameters with mean values roughly five times larger (>15 μm). The mean thickness of the N95 filtration material is 1093 μm and is greater than that of the woven fabrics that span from 420 to 650 μm. A new procedure for measuring the thickness of flannel fabrics is proposed that accounts for raised fibers. µXCT allowed for a quantitative nondestructive approach to measure fabric porosity as well as the surface area/volume. Cotton flannel showed the largest mean isotropy of any fabric, though fiber order within the weave is poorly represented in the surface electron images. Surface fabric isotropy and surface area/volume ratios are proposed as useful microstructural quantities to consider for future particle filtration modeling efforts of woven materials.

Parameters’ Influence on Electrospun Polystyrene-Grubbs’ Catalyst Composite Fibers Morphology

Electrospinning represents a simple, cost-effective technique that allows the production of continuous fibers, with diameters ranging from the micrometer to the nanometer scale. Mixing particles in the polymer feed solution could result in composite fibers, with various potential applications, depending on the particle filler. The influence of electrospinning parameters on the fiber morphology must be investigated to obtain undamaged fibers without large agglomerates. This research presents polystyrene (PS)-based electrospun composite fibers, containing the first- and the second-generation Grubbs’ catalyst (G1 and G2). Loading of both catalysts was 1[Formula: see text]wt.% in the composite fibers, and the influence of different solution flow rates on fiber diameter, shape and regularity was investigated. Applied flow rates were 5, 10, 15 and 20[Formula: see text]ml/h for both composites (PS-G1 and PS-G2). Software analysis of field emission scanning electron microscopy (FESEM) images has revealed that flow rate has a higher influence on the diameter increase in PS-G1 compared to PS-G2, due to a difference in electrostatic forces and polymer-catalyst interactions. In both composites, 10[Formula: see text]ml/h was the threshold for producing smooth and undamaged fibers, further enhanced in PS-G2, where large agglomerates were observed at 20[Formula: see text]ml/h. Furthermore, in both composites, fiber diameter distribution was significantly wider at higher flow rates, which is not a desirable feature in composites. The presented results demonstrated the synergy between different parameters that influence the formation and morphology of electrospun PS-based composites and could help in the future design and processing of continuous composite fibers.

Numerical simulation into influence of airflow channel quantities on melt-blowing airflow field in processing of polymer fiber

Abstract To obtain better airflow field characteristics of melt-blowing and acquire slender melt-blowing fiber, a new die with multi-channel of melt-blowing airflow was designed. The airflow field under the spinneret hole of the melt-blowing die was simulated and analyzed using computational fluid dynamics method, and distribution rules of the ordinary die and the new die on the airflow field along the spinning centerline were compared and discussed. The melt-blowing fiber diameter distribution for the ordinary die and the new die was numerically calculated using a stretching model of the melt-blowing fiber. In contrast with an ordinary die, the new melt-blowing die enhances the average speed in main stretching zone by 89.8% and increases the peak speed by 50.4%. The higher airflow temperature of new die improves the softening degree and melting fluidity of the polymer. Meanwhile, the smaller turbulence intensity and the reverse speed of the new die make airflow more stable and reduce disturbance and adhesion of the fiber, and a larger pressure difference and a peak pressure can accelerate the refinement and attenuation of the fiber. The new melt-blowing die with airflow multi-channel is conducive to extension, which is a better choice in the manufacturing process of nonwoven melt-blowing fibers.

Enhancing filtration performance of submicron particle filter media through bimodal structural design

AbstractDepth filtration is a widely utilized mechanism for submicron aerosol filtration using disposable filter cartridges and facemasks. The filter media should be carefully engineered to reach high filtration efficiency and dust‐loading capacity at the expense of a low‐pressure drop (ΔP). Filter media with bimodal fiber diameter distribution enhance particle capture by creating small pores with tiny fibers, while microfibers improve airflow, reduce ΔP, and increase the effective filter area for particle retention. In this study, bimodal filters were achieved through the homogeneous distribution or layered use of nanofibers and microfibers. The impact of the bimodal design was explored using fibrous mats produced through melt‐blowing, solution‐blowing, and electroblowing methods. Keeping the basis weight of filter samples at 30 gsm, using four‐layered filters (4L) improved air permeability compared to single‐layer samples. The 4L sample exhibited the highest performance, achieving 99.52% efficiency at 148 Pa. Moreover, replacing the melt‐blown layer with bimodal mats in the 4L design increased the filtration efficiency to 99.61% keeping ΔP nearly the same. The corona discharge treatment yielded the highest efficiency (99.99%) in the 4BML sample, even after 1 month the efficiency was maintained at 99.90%, highlighting the advantage of bimodal fiber distribution in electret filters.Highlights Four‐layered filter (4L) structures resulted in improved air permeability. Bimodal layer (BL) achieved by adding SB nanofibers into the melt blowing. BL in 4L structure increased the efficiency from 99.52% to 99.61%. Modified BL sample (4BML) provides the highest QF (0.044 Pa−1) after 1 month.

Numerical simulation for electric field intensity and jet space of the quadratic spiral spinneret with auxiliary electrode

To produce a high quality electrostatic spinneret with low voltage requirements, low energy consumption, and narrow fiber diameter distribution, the mechanical model of the spinning unit of the fractal spiral spinneret was established by using the quadratic fractal spiral parametric equation. The established fractal spiral electrostatic spinning model was imported into COMSOL Multiphysics finite element analysis software, mesh division was performed on the model, multiple spinning units were combined to form the array spinneret, and the optimal parameters of the fractal structure were optimized. However, there are still two sides of the field intensity other than the middle field intensity of the high situation. In order to equalize the field intensity, we used the spinneret properties of the same disc auxiliary electrode and quadratic fractal spiral spinneret in a linear arrangement, and the auxiliary electrode and spinneret distance and spinneret radius of the two important parameters to optimize the simulation, resulting in obtaining a more uniform field intensity distribution of the quadratic fractal spiral spinneret electrospinning equipment. Based on the calculation of the fractional dimension of the Von Koch curve, the fractional dimension of the quadratic fractal spinneret was 1.77. The critical field intensity of the system was calculated to be 2.13 × 106 V/m, and the jet space was 1.22–3.13 mm. The optimized quadratic fractal spinneret model with auxiliary electrode faced the receiving plate in the range of 60° from the left to the right of the spinning sites, –5 to 5 sites, which may emit the spinning jet.

Mineral trioxide aggregate in membrane form as a barrier membrane in guided bone regeneration

Background/purposeIn the field of conservative dentistry and endodontics, mineral trioxide aggregate (MTA), commonly used, possesses advantages such as biocompatibility, antimicrobial properties and osteogenic potential. This study investigated the feasibility of utilizing membrane form mineral trioxide aggregate (MTA) as a barrier membrane in guided bone regeneration (GBR) procedures. Materials and methodsMembranes were electrospun from three different formulations: 15 w/v% Polycaprolactone (PCL), 13 w/v% PCL + 2 w/v% MTA (2MTA), and 11 w/v% PCL + 4 w/v% MTA (4MTA). Physicochemical and mechanical properties of the electrospun membrane were compared, encompassing parameters such as surface morphology, fiber diameter distribution, chemical composition, phase identification, tensile stress, pH variation, and water contact angle. Moreover, the antimicrobial properties against of the electrospun membranes were assessed through direct exposure to streptococcus aureus (S. aureus) and candida albicans (C. albicans). Additionally, on the 7th day, biocompatibility and cell attachment were investigated with respect to L929 (fibroblast) and MC3T3 (pre-osteoblast) cells. Inhibition of L929 cell infiltration and the expression of osteogenic related genes including osteocalcin (OCN), alkaline phosphatase (ALP), and runt related transcription factor 2 (RUNX2) in MC3T3 cells on 7th and 14th days were also investigated. ResultsPCL, 2MTA, and 4MTA exhibited no statistically differences in fiber diameter distribution and tensile stress. However, as the MTA content increased, wettability and pH also increased. Due to the elevated pH, 4MTA demonstrated the lowest viability S.aureus and C.albicans. All membranes were highly biocompatibility and promoted cell attachment, while effectively preventing L929 cell infiltration. Lastly 4MTA showed increase in OCN, ALP, and RUNX2 expression on both 7th and 14th day. ConclusionThe membrane form MTA possessed characteristics essential for a novel barrier membrane.

Co-production of pigment and high value-added bacterial nanocellulose from Suaeda salsa biomass with improved efficiency of enzymatic saccharification and fermentation

This study evaluated the co-production of pigment and bacterial nanocellulose (BNC) from S. salsa biomass. The extraction of the beet red pigment reduced the salts and flavonoids contents by 82.7%–100%, promoting the efficiencies of enzymatic saccharification of the biomass and the fermentation of BNC from the hydrolysate. SEM analysis revealed that the extraction process disrupted the lignocellulosic fiber structure, and the chemical analysis revealed the lessened cellulase inhibitors, consequently facilitating enzymatic saccharification for 10.4 times. BNC producing strains were found to be hyper-sensitive to NaCl stress, produced up to 400.4% more BNC from the hydrolysate after the extraction. The fermentation results of BNC indicated that the LDU-A strain yielded 2.116 g/L and 0.539 g/L in ES-M and NES-M, respectively. In comparison to the control, the yield in ES-M increased by approximately 20.0%, while the enhancement in NES-M was more significant, reaching 292.6%. After conducting a comprehensive characterization of BNC derived from S. salsa through Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and Thermogravimetric Analysis (TGA), the average fiber diameter distribution of these four BNC materials ranges from 22.23 to 33.03 nanometers, with a crystallinity range of 77%–90%. Additionally, they exhibit a consistent trend during the thermal degradation process, further emphasizing their stability in high-temperature environments and similar thermal properties. Our study found an efficient co-production approach of pigment and BNC from S. salsa biomass. Pigment extraction made biomass more physically and chemically digestible to cellulase, and significantly improved BNC productivity and quality.

Preparation and performance of nanofibers by centrifugal spinning with multi-field coupling

Nanomaterials are used in a variety of fields. As a novel way to produce nanofibers, high-speed centrifugal spinning has attracted wide attention. Nanofibers are widely used in medical transmission, bio-chips, and environmental protection. In high-speed centrifugal spinning production, the quality of nanofibers will be affected by the coupling effects of gravity field, centrifugal position, flow field, temperature and humidity field. The quality of nanofibers will also be affected by the collection distance, motor speed and nozzle structure size. In this paper, the flow of spinning solution in the nozzle is investigated mathematically. Then the solution flow in the nozzle is simulated. Finally, high-speed centrifugal spinning experiments were carried out and nanofiber membranes were collected. The surface quality of the nanofiber membrane was observed by scanning electron microscope (SEM), and the figure of fiber diameter distribution was obtained. Thermogravimetric (TG) analysis shows that the thermal stability and ablative resistance of nanofiber membranes are improved. The results show that the high-speed centrifugal spinning method has high production efficiency. The nanofibers produced by high-speed centrifugal spinning method have good surface quality, uniform diameter distribution and good thermal stability.

The Effect of Plasma Treatment on the Mechanical and Biological Properties of Polyurethane Artificial Blood Vessel.

In recent years, the incidence of cardiovascular disease has increased annually, and the demand for artificial blood vessels has been increasing. Due to the formation of thrombosis and stenosis after implantation, the application of many materials in the human body has been inhibited. Therefore, the choice of surface modification process is very important. In this paper, small-diameter polyurethane artificial blood vessels were prepared through electrospinning, and their surfaces were treated with plasma to improve their biological properties. The samples before and after plasma treatment were characterized by SEM, contact angle, XPS, and tensile testing; meanwhile, the cell compatibility and blood compatibility were evaluated. The results show that there are no significant changes to the fiber morphology or diameter distribution on the surface of the sample before and after plasma treatment. Plasma treatment can increase the proportion of oxygen-containing functional groups on the surface of the sample and improve its wettability, thereby increasing the infiltration ability of cells and promoting cell proliferation. Plasma treatment can reduce the risk of hemolysis, and does not cause platelet adhesion. Due to the etching effect of plasma, the mechanical properties of the samples decreased with the extension of plasma treatment time, which should be used as a basis to balance the mechanical property and biological property of artificial blood vessels. But on the whole, plasma treatment has positive significance for improving the comprehensive performance of samples.