Fiber Based Master Oscillator Power Research Articles

Four-wave mixing seeded by a rapid wavelength-sweeping FDML laser for nonlinear imaging at 900 nm and 1300 nm.

Four-wave mixing (FWM) enables the generation and amplification of light in spectral regions where suitable fiber gain media are unavailable. The 1300 nm and 900 nm regions are of especially high interest for time-encoded (TICO) stimulated Raman scattering microscopy and spectro-temporal laser imaging by diffracted excitation (SLIDE) two-photon microscopy. We present a new, to the best of our knowledge, FWM setup where we shift the power of a home-built fully fiber-based master oscillator power amplifier (MOPA) at 1064 nm to the 1300-nm region of a rapidly wavelength-sweeping Fourier domain mode-locked (FDML) laser in a photonic crystal fiber (PCF) creating pulses in the 900-nm region. The resulting 900-nm light can be wavelength swept over 54 nm and has up to 2.5 kW (0.2 µJ) peak power and a narrow instantaneous spectral linewidth of 70 pm. The arbitrary pulse patterns of the MOPA and the fast wavelength tuning of the FDML laser (419 kHz) allow it to rapidly tune the FWM light enabling new and faster TICO-Raman microscopy, SLIDE imaging, and other applications.

Nanoparticle doping for high power fiber lasers at eye-safer wavelengths.

A nanoparticle (NP) doping technique was developed for fabricating erbium (Er)- and holmium (Ho)-doped silica-based optical fibers for high energy lasers. Slope efficiencies in excess of 74% were realized for Er NP doping in a single mode fiber based master oscillator power amplifier (MOPA) and 53% with multi-Watt-level output in a resonantly cladding-pumped power oscillator laser configuration based on a double-clad fiber. Cores comprising Ho doped LaF3 and Lu2O3 nanoparticles exhibited slope efficiencies as high as 85% at 2.09 µm in a laser configuration. To the best of the authors' knowledge, this is the first report of a holmium nanoparticle doped fiber laser as well as the highest efficiency and power output reported from an erbium nanoparticle doped fiber laser.

Record power, ultra-broadband supercontinuum source based on highly GeO2 doped silica fiber.

We demonstrate highly germania doped fibers for mid-infrared supercontinuum generation. Experiments ensure a highest output power of 1.44 W for a broadest spectrum from 700 nm to 3200 nm and 6.4 W for 800 nm to 2700 nm from these fibers, while being pumped by a broadband Erbium-Ytterbium doped fiber based master oscillator power amplifier. The effect of repetition frequency of pump source and length of germania-doped fiber has also been investigated. Further, germania doped fiber has been pumped by conventional supercontinuum source based on silica photonic crystal fiber supercontinuum source. At low power, a considerable broadening of 200-300 nm was observed. Further broadening of spectrum was limited due to limited power of pump source. Our investigations reveal the unexploited potential of germania doped fiber for mid-infrared supercontinuum generation. These measurements ensure the potential of germania based photonic crystal fiber or a step-index fiber supercontinuum source for high power ultra-broad band emission being by pumped a 1060 nm or a 1550 nm laser source. To the best of our knowledge, this is the record power, ultra-broadband, and all-fiberized supercontinuum light source based on silica and germania fiber ever demonstrated to the date.

첨두 출력 1.5 kW급 준연속 이터븀 첨가 광섬유 레이저

본 논문에서는 이터븀(Yb)이 첨가된 이중 클래딩 광섬유를 이용한 고출력 고품질 준연속 레이저 시스템에 대한 연구 개발과 레이저 특성에 대해 보고한다. 이론적 수치 모사를 통해 최적화된 준연속 레이저 발진 조건을 찾았고, 그것을 바탕으로 공진기 구조와 MOPA (Master-Oscillator Power-Amplifier) 구조를 가진 광섬유 레이저 시스템을 각각 구축하였다. 두 레이저 시스템 모두 10 Hz 반복률, 10 ms로 작동시킬 때 최고 평균 출력 >150 W, 첨두 출력 >1.5 kW 이상의 준연속 레이저 빔을 발생시키는데 성공하였고, 레이저 발진 특성 및 빔 특성을 각각 비교하였다. 그리고 향후 더 높은 출력을 얻기 위한 방법과 전망에 대해 논의할 것이다. High-power quasi-continuous-wave (qcw) operation in Yb-doped double-clad fiber lasers with near-diffraction-limited quality of the output beam is reported. Based on numerical simulation, we built a simple, all-fiberized Yb fiber laser, and a fiber-based master-oscillator power amplifier (MOPA). Both laser systems have successfully produced qcw output with average power greater than 150 W at 1080 nm and 10 ms pulse duration at 10 Hz repetition rate, corresponding to a peak power greater than 1.5 kW for 205 W of pump power at 976 nm. Laser performance, including beam quality and slope efficiency, was characterized in both configurations. Prospects for power scaling and applications are discussed.

Single polarization picosecond fiber MOPA power scaled to beyond 500 W

We demonstrate a gain-switched diode-seeded, ytterbium-doped fiber based master oscillator power amplifier (MOPA) system, capable of delivering 2.4 μJ, 35 ps pulses at a repetition frequency of 215 MHz in a single-polarization, close to diffraction limited beam. We are aware that the corresponding average power of > 500 W is a record for such a MOPA system. Further pulse energy scaling was limited primarily by the onset of nonlinear effects such as self-phase modulation and stimulated Raman scattering which led to a compromised pulse quality at higher peak powers (> 70 kW).

SBS-managed high-peak-power nanosecond-pulse fiber-based master oscillator power amplifier

We report on a compactly packaged Yb-doped fiber-based laser architecture featuring an actively pulse controlled, single-longitudinal-mode seeder and multistage amplifier chain terminated by a "folded" rod-type photonic crystal fiber. In this laser source, stimulated Brillouin scattering (SBS) is the power-limiting factor, but is managed by phase modulating the seeder with a pseudo-random noise signal. Pulse energy/peak power of ~2 mJ/1.5 MW at 10 kHz repetition rate are thus obtained within ~1.55 ns pulses of peak spectral brightness >20 kW cm(-2) sr(-1) Hz(-1).

Generation of picosecond blue light pulses at 464 nm by frequency doubling an Nd-doped fiber based Master Oscillator Power Amplifier

We demonstrate 308 mW of single-mode laser emission at 464 nm from a frequency doubled picosecond fiber based Master Oscillator Power Amplifier (MOPA). The laser system consisted of a gain-switched and spectrally narrowed Fabry-Perot laser diode emitting at 928 nm, which was amplified in a two-stage amplifier based on W-type double-clad Nd-doped fibers. Output pulses with a duration of 90 ps at a repetition rate of 41 MHz were frequency-doubled in a periodically poled MgO-doped Congruent Lithium Niobate. A conversion efficiency of 14.8% was achieved in single-pass configuration.