Fertilizer Production Research Articles

SOSIALISASI DAN PEMANFAATAN LIMBAH DAPUR (SAYURAN) UNTUK PEMBUATAN PUPUK ORGANIK CAIR DI DESA NUANEA KECAMATAN AMAHAI KABUPATEN MALUKU TENGAH

This research was conducted in contry Nua Nea, Amahai subdistrict, Central Maluku Regency, to over come the problem of lack of fertilizer subsidies and high fertilizer prices. The aim is to provide solutions to farmers through socialization and production of liquid organic fertilizer (POC). The research involves KKN activies that involve students in assisting the community. The material presented includes the benefits of kitchen waste as a source of nutrients and methods for making POC. The research results show that this activity provides new knowledge to the community and incraises awareness of environmental cleanlinees the agricultural potential and environmental cleanliness of Nua Nea state.

Unlocking the Value of Phosphogypsum Waste: Steam Calcination for Efficient Decomposition and Resource Recovery

ABSTRACT Phosphogypsum is a waste by-product of phosphate fertilizer production. It contains calcium sulfate (CaSO4.xH2O), which can be decomposed to produce calcium oxide (CaO) and sulfur dioxide (SO2). Steam calcination is a process that uses steam to decompose CaSO4. This study represents the first comprehensive investigation of steam calcination applied to phosphogypsum, comparing its performance to pure CaSO4 at various temperatures (1050–1200 °C) and steam molar ratios (0, 4%, and 30%). The results showed that steam calcination can significantly lower the calcination temperature of both CaSO4 and phosphogypsum. The presence of steam can significantly accelerate the decomposition reaction of pure CaSO4 and phosphogypsum when compared to decomposition in nitrogen or air. It was found that the decomposition reaction in steam follows the contracting cylinder reaction model in the case of CaSO4 and the first-order reaction model for the phosphogypsum. Additionally, the activation energy for the steam calcination of CaSO4 and phosphogypsum were found to be 421.2 kJ/mol and 418.6 kJ/mol, respectively, which are lower than the activation energy for the calcination in oxyfuel combustion products (O2, CO2, SO2, and H2O gases) 531.4 kJ/mol demonstrating its potential for enhanced energy efficiency. As a result, steam calcination emerges as a promising sustainable solution for valorizing phosphogypsum while reducing energy consumption and greenhouse gas emissions.

Production and Subsequent Application of Different Biochar-based Organic Fertilizers to Enhance Vegetable Quality and Soil Carbon Stability

Production and Subsequent Application of Different Biochar-based Organic Fertilizers to Enhance Vegetable Quality and Soil Carbon Stability

Optimizing food waste bioconversion with sodium selenite-enhanced Lucilia sericata maggots: a sustainable approach for chicken feed production and heavy metal mitigation.

Recycling food waste by feeding it to insects can result in the continuous production of high-quality animal feed protein and organic fertilizer. However, the bioconversion efficiency and safety of using insects as feed protein for animal breeding are important factors limiting the development of this technology. Therefore, we aimed to optimize the efficiency of bioconversion of food waste using Lucilia sericata maggot (LSM). Sodium selenite (SS) was used to improve the quality and safety of each trophic-level organism. The results showed that an SS concentration of 15mgkg-1 w.w. in the food waste culture substrate (SS15), the yield and quality of the obtained LSMs were optimal. The total selenium (Se) content of LSMs was 82.4 ± 1.16mgkg-1 d.w., and non-inorganic Se accounted for 96.4% ± 2.01% of the total Se content. Additionally, the conversion efficiency of food waste was 18.7% higher than that in the control group (p < 0.05). When SS15 was used to raise maggots as a protein substitute for fish meal (commercial feed), the weight of the chickens and the crude protein content were 1.09-1.26times and 1.09-1.13times, respectively (p < 0.05), in comparison with the corresponding findings obtained with the use of ordinary maggots and commercial feed. In this group, glutathione peroxidase, superoxide dismutase, catalase, and immunoglobulin A and G activities were significantly higher than those obtained with the other feeds (p < 0.05). During this cyclic utilization process, the total Se content in chickens (0.31 ± 0.05mgkg-1 w.w. in the breast, 0.19 ± 0.01mgkg-1 w.w. in the leg, and 0.57 ± 0.01mgkg-1 w.w. in the liver) significantly increased (p < 0.05). Meanwhile, the Cu and Zn contents in the LSMs and chickens increased, whereas cadmium, lead, chromium, and nickel absorption was inhibited (p < 0.05). Health risk assessment based on the levels of Se and heavy metals showed that Se-enriched chickens produced using this method can be safely consumed.

Optimizing liquid‐applied iron sulfate rate and application interval for dollar spot suppression on golf course fairways

AbstractIron sulfate applications reduce dollar spot severity on golf course turfgrass, but further optimizing the use of iron sulfate may increase efficacy and encourage more widespread adoption by golf course superintendents. Three iron sulfate rates (9, 18, 36 kg ha−1), two application intervals (7 and 14 days), three water volumes (306, 612, and 1223 L ha−1), and combinations with fertilizer and fungicide products were evaluated at field locations in Madison, WI, Bloomington, MN, and Blacksburg, VA, in 2018 and 2019. Iron sulfate rate decreased dollar spot at all locations in a dose‐dependent manner, and 7‐day applications were more efficacious than 14‐day applications. Water volume had no impact on disease severity at any location and combining iron sulfate with fertilizer had minimal impact as well. These results demonstrate improved iron sulfate strategies for dollar spot management and can be implemented by golf course superintendents in areas where fungicide resistance and fungicide regulations limit the use of traditional fungicides.

The impact of replacing chemical nitrogen fertilizer with monosodium glutamate waste liquid residue on yield, quality, and carbon emission of rice production

Replacing chemical nitrogen (N) fertilizer with monosodium glutamate waste liquid residue (MSGWLR) is beneficial for achieving clean production in both the monosodium glutamate (MSG) industry and agriculture. However, the impact of this method on rice production and environment has not yet been clear. This study adopted field experiments to clarify the rice yield, quality and carbon emissions applying conventional application of chemical N fertilizer (CF), reduction of N fertilizer by 20% (N80%), based on reduction of chemical N fertilizer by 20% and replacing 50% chemical N fertilizer with MSGWLR (MSGWLR50%), and replacing 100% chemical N fertilizer (MSGWLR100%). The results showed that compared with CF treatment, MSGWLR100% showed no significant changes in rice yield, milling quality, fatty acid value, and taste quality. The chalkiness rate of rice significantly decreased, and the protein content significantly increased. On the other hand, the carbon emissions from rice production treated with MSGWLR100% were the lowest, with a 58.5% decrease in global warming potential (GWP) compared to CF treatment. This was mainly because MSGWLR100% treatment could provide rich and balanced nutrients for rice growth, and it did not promote greenhouse gas (GHG) emissions from paddy field. At the same time, it effectively reduced the indirect carbon emissions in chemical fertilizer production by reducing chemical N fertilizer. Therefore, the MSGWLR100% fertilization treatment is beneficial for cleaner production in the MSG industry and rice cultivation.Graphical

Concentrating Nitrogen Waste with Electrodialysis for Fertilizer Production

Concentrating Nitrogen Waste with Electrodialysis for Fertilizer Production

Process development and optimization of sustainable and integrated large scale ammonia production process using water electrolysis based green hydrogen: Investigating process, energy, economic & environmental perspectives

Ammonia is an important raw material for fertilizer production and significantly contributes globally to agricultural systems. The multi-objective optimization of a large-scale integrated ammonia production process using water electrolysis-based green hydrogen is carried out using the Hybrid Multi-Objective Differential Evolution-Distance Learning Scheme (Hybrid MODE-DLS) algorithm. Three optimization cases are solved with the objectives of ammonia production rate, total production cost, and total energy by considering nine decision variables, and multiple constraints. The maximum ammonia production (66.51 kmol/h) and minimum total production cost (105.07 $/yr × 105) are obtained in Case 1 whereas the minimum energy value (7863.45 kWh) is obtained in Case 2. The minimum heat credit value of 3057300.5 $/annum exists in Case 2 solutions whereas the maximum heat credit value of 7992076 $/annum is seen in Case 3. The ammonia production rate increased by 82.79% in Case 2 results compared to the base case results.

Urine luck: Environmental assessment of yellow water management in buildings for urban agriculture

The increasing global demand for agricultural production poses challenges to maintain the needs for critical fertilizers such as nitrogen. This study explores the potential of human urine as a source of renewable nitrogen for fertilizer production. Through a life cycle assessment, three different urine management strategies were compared: (S1) an artificial wetland, (S2) an on-site lab-scale aerobic reactor for nitrogen recovery, and (S3) a centralized wastewater treatment plant. While scenario S2 had the highest impacts in 6 out of 8 categories, an advantage in marine eutrophication was identified. S2 showed high energy demand (750 kg MJ-eq) and ecotoxicity (602 kg 1.4-DCB-eq.) mainly due to energy requirements. Nitrogen production exceeded 2.3 times the yearly nitrogen demands of the building tomato production. Upscaling S2 reduces impacts up to 2 times, lowering the payback time from 29 to 13 years. Therefore, implementing large-scale nitrogen recovery systems in cities is encouraged.

Effect of biochar on the co-conversion of carbon-nitrogen and humification of kitchen waste composting process

Composting was an effective technique to treat kitchen waste into high-quality fertilizer or soil amendment. During the composting process of kitchen waste, different degradation rates of carbon and nitrogen resulted in carbon loss, nitrogen emission and low product quality. Consequently, the aim of this study was to investigate the mechanisms and effects of biochar (5%, 10% and 15%) on synergistic conversion of nitrogen and carbon and humification processes in kitchen waste composting. The findings revealed that the addition of 10% and 15% biochar prolonged the thermophilic phase (>55°C) by a minimum of three days compared to CK. Additionally, the final NH4+-N concentration in the 10% and 15% treatment groups exhibited a 66.7% reduction in comparison to the control. Besides, the 15% addition proved more efficacious in reducing the NH4+-N content. The increase in biochar facilitates the adsorption of ammonia nitrogen and influences the structure of the microbial community, especially Bacteroides and Pseudoxanthomonas, thus promoting nitrogen mineralisation and humification, which provides energy and carbon for the survival and metabolism of more microorganisms. The compost with 15% biochar exhibited higher levels of SBR1031, resulting in a 73.8% increase in the conversion of nitrogen to NO3--N compared to the control. The aforementioned behaviour facilitates a synergistic conversion of nitrogen and carbon. Therefore, the addition of biochar promotes synergistic carbon and nitrogen transformations in terms of nitrogen conservation, organic matter decomposition, microbial species and their interactions, which is essential for the production of value-added compost fertilizers.

Optimizing Nitrate Fertilizer Production Using Plasma-Activated Water (PAW) Technology: An Analysis of Dielectric Properties

This study investigates the potential of Plasma-Activated Water (PAW) technology for the production of nitrate fertilizer, focusing on the dielectric properties of plasma-treated water, such as the dielectric constant and dielectric loss factor. The research aims to elucidate the impact of plasma treatment and varying water flow rates on these properties. An experimental approach was employed wherein ion-free water was subjected to plasma treatment at different flow rates (0.5, 1.0, and 2.0 L/min) and durations (1, 2, and 3 h). The results reveal a marked enhancement in the dielectric properties of the water following plasma treatment, with the most significant improvements observed at a flow rate of 0.5 L per minute and a treatment duration of 3 h, and dielectric efficiencies of 97.82%, 97.21%, and 96.61% achieved at flow rates of 0.5, 1.0, and 2.0 L/min, respectively. These findings demonstrate that PAW technology enhances the efficiency of nitrate fertilizer production by optimizing energy storage and reducing energy losses. The study underscores the potential of PAW as a sustainable, environmentally benign alternative to conventional chemical fertilizers, contributing to more efficient and sustainable agricultural practices.

Integration of geoelectric methods and remote sensing in assessing the environment state in the area of impact of ecologically hazardous objects

Relevance. The need for comprehensive assessment of environmental components in the zones of ecologically hazardous industrial facilities impact, which enables to operatively identify the spatial structure of technogenic pollution. Aim. Chemical pollution assessment of the geological environment in the zones of industrial objects impact, based on the combined use of remote sensing and ground-based geoelectric methods. Objects. Sources of pollution during the production of mineral fertilizers (phosphogypsum dumps, sulfur storage). Methods. The author has developed a complex of methods, consisting of multispectral space imaging (Sentinel-2 satellite images) and ground-based geoelectric researches: water surface resistivity measurements, natural electric field potential imaging, vertical electrical sounding. According to satellite image data (vegetation indices NDVI, NBR, SWVI), technogenic geosystems modifications are distinguished, characterizing different levels of chemical pollution (TM-1, TM-2 and natural geosystem). Within the modification zones, geoelectrical studies are carried out to assess the depth of contamination. Results. In the zone of phosphogypsum dumps impact, two technogenic modifications were distinguished, with a total area of 83.3 hectares, characterized by a statistically significant decrease in the values of vegetation indices compared to the average level. Based on the results of vertical electrical sounding, it was established that the depth of contamination in the TM-1 zone reaches up to 20 m, in the TM-2 zone – up to 2.5 m. The migration of contaminated substances from the dumps occurs with surface drain. In the zone of impact of the sulfur storage, the area of pollution, specified with vegetation indices, covers two hectares. According to the results of the natural electric field method and vertical electrical sounding, the flow of pollution from the sulfur storage site penetrates into groundwater, which is discharged in the TM-1 zone, causing the death of vegetation. In the TM-2 zone, contamination is registered only in the ground aquifer. The developed set of methods enables to quickly and relatively comprehensively diagnose the state of the undergoing technogenic impacts geological environment.

Creating a Genetic Toolbox for the Carbon-Fixing, Nitrogen-Fixing and Dehalogenating Bacterium Xanthobacter autotrophicus.

Xanthobacter autotrophicus is a metabolically flexible microorganism with two key features: (1) The organism has adapted to grow on a wide variety of carbon sources including CO2, methanol, formate, propylene, haloalkanes and haloacids; and (2) X. autotrophicus was the first chemoautotroph identified that could also simultaneously fix N2, meaning the organism can utilize CO2, N2, and H2 for growth. This metabolic flexibility has enabled use of X. autotrophicus for gas fixation, the creation of fertilizers and foods from gases, and the dehalogenation of environmental contaminants. Despite the wide variety of applications that have already been demonstrated for this organism, there are few genetic tools available to explore and exploit its metabolism. Here, we report a genetic toolbox for use in X. autotrophicus. We first identified suitable origins of replication and quantified their copy number, and identified antibiotic resistance cassettes that could be used as selectable markers. We then tested several constitutive and inducible promoters and terminators and quantified their promoter strengths and termination efficiencies. Finally, we demonstrated that gene expression tools remain effective under both autotrophic and dehalogenative metabolic conditions to show that these tools can be used in the environments that make X. autotrophicus unique. Our extensive characterization of these tools in X. autotrophicus will enable genetic and metabolic engineering to optimize production of fertilizers and foods from gases, and enable bioremediation of halogenated environmental contaminants.

Kasgot Fertilizer Production Training to Boost Agricultural Productivity and Economic Sustainability in Suwayuwo Village

The Banana Chip and Peel Community Micro Business in Bandung needs help in marketing promotion and financial management despite the high nutritional potential of banana peels. This initiative aims to enhance local micro-businesses marketing strategies and financial practices by empowering community members with the necessary skills and knowledge. Utilizing a community-based research (CBR) method, the project involved focus group discussions, interviews, and marketing training seminars to identify obstacles and promote product innovation. Participants were taught effective marketing techniques and financial accounting practices, including cash flow management and profit-loss reporting. The results demonstrated a significant improvement in business stability and sales performance, with participants adopting diverse product offerings such as cheese and chocolate-flavored chips. Community engagement played a crucial role, ensuring strategies were culturally relevant and fostering a sense of ownership among participants. In conclusion, this initiative successfully applied theoretical frameworks to enhance the economic viability of local micro-businesses. By integrating effective marketing, sound financial management, and community participation, the program empowered entrepreneurs to innovate and sustain their enterprises, ultimately contributing to the region's economic development. Future efforts should build on these principles to support local businesses further.

Management of Plant Diseases with Green Synthesized Nanoparticles Using Plant Extracts

Nanotechnology is a rapidly advancing field that has effectively tackled various issues across multiple industries, including agriculture. Nanoparticles (NPs) can typically be synthesized using two different techniques: top-down approach and bottom-up approach. In top-down approach, NPs are generated by reducing the size of a larger material, resulting in agglomerates with nano sized particles. Bottom-up approach involves building nanoscale structures from atomic and molecular components. In agriculture, nanotechnology plays a role in the production of nanoscale fertilizers, pesticides, and herbicides. Nanoparticles are used in plant disease management as well. The green synthesis of nanoparticles is often referred to as biosynthesis. It uses a range of biological sources like microorganisms or their derivatives as well as plant extracts, instead of synthetic chemicals, with minimal impact on human health and the environment. Green-synthesized nanoparticles (GSNPs) are known for their ease of production and cost-effectiveness. They offer several advantages, including their ability to induce systemic resistance to diseases and exhibit fungicidal and bactericidal properties.

Meningkatkan Kapasitas Kelompok Tani Sejati Melalui Manejemen Branding dan Strategi Pemasaran Digital Produk Pupuk Organik

The conventional marketing system for agricultural products has not been able to increase sales of products produced by farmer groups. This community service activity intervention aims to empower the Sejati Farmers Group through the socialization of branding management and digital marketing strategies for organic fertilizer products. This activity was carried out in July 2024 at the Sejati Farmers Group, Lendang Nangka Utara Village, Masbagik District, East Lombok Regency, with 18 participants. The service method used participatory and personal communication. This training resulted in a 25% increase in knowledge and a 15% increase in organic fertilizer sales in the three months after the training. In addition, this activity provides alternative solutions to environmental and social problems, as well as improving the welfare of the local community.

Environmental impacts and nitrogen-carbon-energy nexus of vegetable production in subtropical plateau lake basins.

Vegetables are important economic crops globally, and their production has approximately doubled over the past 20 years. Globally, vegetables account for 13% of the harvested area but consume 25% of the fertilizer, leading to serious environmental impacts. However, the quantitative evaluation of vegetable production systems in subtropical plateau lake basins and the establishment of optimal management practices to further reduce environmental risks are still lacking. Using the life cycle assessment method, this study quantified the global warming, eutrophication, acidification, and energy depletion potential of vegetable production in a subtropical plateau lake basin in China based on data from 183 farmer surveys. Our results indicated that vegetable production in the study area, the Erhai Lake Basin, was high but came at a high environmental cost, mainly due to low fertilizer efficiency and high nutrient loss. Root vegetables have relatively high environmental costs due to the significant environmental impacts of fertilizer production, transportation, and application. A comprehensive analysis showed that the vegetable production in this region exhibited low economic and net ecosystem economic benefits, with ranges of 7.88-8.91 × 103 and 7.35-8.69 × 103 $ ha-1, respectively. Scenario analysis showed that adopting strategies that comprehensively consider soil, crop, and nutrient conditions for vegetable production can reduce environmental costs (with reductions in global warming potential (GWP), eutrophication potential (EP), acidification potential (AP), and energy depletion potential (EDP) by 10.6-28.2%, 65.1-73.5%, 64.5-71.9%, 47.8-70.4%, respectively) compared with the current practices of farmers. This study highlighted the importance of optimizing nutrient management in vegetable production based on farmers' practices, which can achieve more yield with less environmental impacts and thereby avoid the "trade-off" effect between productivity and environmental sustainability.

Evaluation of the efficiency of dry anaerobic digester in the production of biogas and fertilizer using activated sludge and plant waste.

The process of dry anaerobic digestion (DAD) is an effective economic and environmentally friendly method due to its features such as reducing the volume of waste, destroying pathogens, consuming less energy, and producing biogas rich in energy and fertilizer. This study was conducted on a pilot scale with a reactor volume of 24L in 30 days for three ratios of C/N: 30, 25, and 20 separately using a mixture of activated sludge and plant waste. During the process, the temperature, pH, and ratio of C/N were measured at certain times, and the percentage of gases produced by the Gas chromatography (GC) device was also measured. The results were compared with the National standard of Iran (Compost, Physical, and Chemical Specifications) at the end of the process. The results showed that the average volume of biogas produced in ratios of C/N: 30, 25, 20 is 1.7, 2.5, and 1.5L. d-1, respectively. The results showed that in the C/N ratio of 20, and 25, the amount of, C/N ratio and NO3 are in the range the standard of class 1, and the amount of Phosphorus pentoxide (P2O5) is in the range the standard of class 2. The results showed that the average microbial parameters in ratios of C/N: 30, 25, and 20 are lower than the national standard of Iran. The dry digester is an efficient method in waste treatment, methane gas production, and quality fertilizer close to the national standard of Iran.

Microbial Fertilizing Products Impact on Productivity and Profitability of Organic Strawberry Cultivars

Poland is a major producer of various fruits, including strawberries. As growing consumer awareness of food quality, health, and wellbeing is increasing, farmers are receiving a new market opportunity for organic products of good quality. The integration of microbial solutions into agricultural practices can foster the transition of agricultural farms towards more resilient and sustainable production of quality food. The objective of this study was to assess the influence of novel microbial biopreparations (microbial fertilizing products) containing Bacillus sp., humic acids, and other organic compounds on the economic viability of three strawberry cultivars (‘Honeoye’, ‘Vibrant’, and ‘Rumba’) under organic farming conditions. This study was conducted in 2021 as a field experiment. Irrigated and non-irrigated strawberries were treated with five microbial fertilizing products (K2–K6). The single plot area was 16 m2, with a total of 144 plots. The adopted planting density of strawberries was 30,052 per hectare. K3 treatment was found to be the most universal microbial treatment in terms of positive impact on yields, with significant yield increase on both the non-irrigated (yield increase of 3.76 t·ha−1) and irrigated experiments (yield increase of 5.78 t·ha−1). The K4 treatment on the non-irrigated strawberries resulted in a yield increase of 4.96 t·ha−1, which at the same time had no effect on the yield of the irrigated experiment. On average, application of the K2–K6 combinations on the non-irrigated strawberries resulted in a yield increase from 13.4% (K2) to 33.5% (K4). The irrigated strawberries showed a yield increase from 3.9% (K4—non-significant yield increase) to as much as 36.1% (K3). The highest direct surplus for the non-irrigated strawberries was recorded for the K4 treatment (38,603 PLN·ha−1) and for K3 for the irrigated experiment (42,945 PLN·ha−1). The direct surplus for ‘Rumba’ and ‘Vibrant’ was higher than for ‘Honeoye’ on both the irrigated (22% and 53%, respectively) and non-irrigated (19% and 18%, respectively) experiments. The average profitability index for all tested non-irrigated and irrigated varieties improved when treated with microbial fertilizer products, with profitability indexes of 143.3–168.8% on the non-irrigated plantation and 129.2–169.7% on the irrigated plantation. The tested microbial fertilizing products proved to be valuable products to improve the productivity and economic effectiveness of organic strawberry production. At the same time, their use needs to be adapted to local plantation conditions.

Use of Fatty Acids in Fertilizer Formulation: A Systematic Review

Synthetic fertilizers have been a subject of socio-environmental challenges. A more sustainable approach is necessary to develop these farm products. Thus, this review presents a strategy for fertilizer production by utilizing fatty acids and by-products derived from renewable sources. However, given the scarcity of data on the topic in scientific journals, this review used the PRISMA report methodology from patent databases. Results show that China is this field’s most significant intellectual property holder. Patents were predominantly vegetable-based (60%), mixed (14%), and animal- based (8.47%), with innovations including liquid fertilizers of plant and animal-based fatty acid esters, as well as the use of controlled-release technology. 80.60% of fertilizers were applied to the soil, followed by foliar application (12.75%) and seed application (0.60%). Notable contributions included fertilizers acting as pesticides and anti-caking agents. Thus, we realize the urgency of continuing scientific research to pursue more responsible and efficient agricultural practices.