Femtosecond Transient Absorption Research Articles

Ultrafast Dynamics of Self-Trapped Excitons in Cs2AgInCl6:Al3+ Double Perovskite Nanocrystals.

It is a huge challenge to increase the photoluminescence (PL) of lead-free halide perovskites, and understanding the mechanism behind exciton dynamics can provide a valuable solution. Herein, we achieved enhanced broad-band emission at ambient conditions in Cs2AgInCl6 by tuning self-trapped excitons (STEs) through Al3+ doping. Cryogenic measurements showed an inhomogeneous nature of STE emission due to the presence of defect states and is subject to thermal quenching. An increased Huang-Rhys factor (S-factor) resulted in better electron-phonon coupling and high-density STE states post Al3+ doping. Femtosecond transient absorption (fs-TA) results provided insights into the distribution dynamics of excitons, which occurs through gradient energy levels from free excitons (FE) to STEs, where each STE state potentially possesses higher quantized energy states. Overall, this study aims to comprehend the origins of self-trapping and decay of STEs in Cs2AgInCl6:Al3+ and emphasizes the potential of compositional engineering to mitigate self-trapping in this material.

Strategically designing and fabricating nitrogen and sulfur Co-doped g-C3N4 for accelerating photocatalytic H2 evolution

Doping engineering is an effective strategy for graphitic carbon nitride (g-C3N4) to improve its photocatalytic hydrogen evolution reaction (HER) performance. In this work, a novel nitrogen and sulfur co-doped g-C3N4 (N, S-g-C3N4) is elaborately designed on the basis of theoretical predictions of first-principle density functional theory (DFT). The calculated Gibbs free energy of adsorbed hydrogen (ΔGH*) for N, S-g-C3N4 at the N-doping active sites is extremely close to zero (0.01 eV). Inspired by the theoretical predictions, the N, S-g-C3N4 is successfully fabricated through ammonia-rich pyrolysis synthesis strategy, in which ammonia is in-situ obtained by pyrolyzing melamine. Subsequent characterizations indicate that the N, S-g-C3N4 possesses high specific surface area, outstanding light utilization, good hydrophilicity, and efficient carrier transfer efficiency. Consequently, the N, S-g-C3N4 displays an extremely high H2 evolution rate of 8269.9 µmol g−1 h−1, achieves an apparent quantum efficiency (AQE) of 3.24%, and also possesses outsatnding durability. Theoretical calculations further demonstrate that N and S dopants can not only introduce doping energy level to reduce the band gap, but also induce charge redistribution to facilitate hydrogen adsorption, thus promoting the photocatalytic HER process. Moreover, femtosecond transient absorption (fs-TA) spectroscopy further corroborates the efficient photogenerated carrier transport of N, S-g-C3N4. This research highlights a promising and reliable strategy to achieve superior photocatalytic activity, and exhibits significant guidance for precise designing high-efficiency photocatalysts.

Excited Charge Separation in a π-Interacting Phenothiazine-Zinc Porphyrin-Fullerene Donor-Acceptor Conjugate.

We have designed, synthesized, and characterized a donor-acceptor triad, SPS-PPY-C60, that consists of a π-interacting phenothiazine-linked porphyrin as a donor and sensitizer and fullerene as an acceptor to seek charge separation upon photoexcitation. The optical absorption spectrum revealed red-shifted Soret and Q-bands of porphyrin due to charge transfer-type interactions involving the two ethynyl bridges carrying electron-rich and electron-poor substituents. The redox properties suggested that the phenothiazine-porphyrin part of the molecule is easier to oxidize and the fullerene part is easier to reduce. DFT calculations supported the redox properties wherein the electron density of the highest molecular orbital (HOMO) was distributed over the donor phenothiazine-porphyrin entity while the lowest unoccupied molecular orbital (LUMO) was distributed over the fullerene acceptor. TD-DFT studies suggested the involvement of both the S2 and S1 states in the charge transfer process. The steady-state emission spectrum, when excited either at porphyrin Soret or visible band absorption maxima, revealed quenched emission both in nonpolar and polar solvents, suggesting the occurrence of excited state events. Finally, femtosecond transient absorption spectral studies were performed to witness the charge separation by utilizing solvents of different polarities. The transient data was further analyzed by GloTarAn by fitting the data with appropriate models to describe photochemical events. From this, the average lifetime of the charge-separated state calculated was found to be 169 ps in benzonitrile, 319 ps in dichlorobenzene, 1.7 ns in toluene for Soret band excitation, and ∼320 ps for Q-band excitation in benzonitrile.

Study of rutile TiO2(110) single crystal by transient absorption spectroscopy in the presence of Ce4+ cations in aqueous environment. Implication on water splitting

Ce4+ cations are commonly used as electron acceptors during the water oxidation to O2 reaction over Ir- and Ru-based catalysts. They can also be reduced to Ce3+ cations by excited electrons from the conduction band of an oxide semiconductor with a suitable energy level. In this work, we have studied their interaction with a rutile TiO2(110) single crystal upon band gap excitation by femtosecond transient absorption spectroscopy (TAS) in solution in the 350–900 nm range and up to 3.5 ns. Unlike excitation in the presence of water alone the addition of Ce4+ resulted in a clear ground-state bleaching (GSB) signal at the band gap energy of TiO2 (ca. 400 nm) with a time constant t = 4–5 ps. This indicated that the Ce4+ cations presence has quenched the e-h recombination rate when compared to water alone. In addition to GSB, two positive signals are observed and are attributed to trapped holes (in the visible region, 450–550 nm) and trapped electrons in the IR region (>700 nm). Contrary to expectation, the lifetime of the positive signal between 450 and 550 nm decreased with increasing concentrations of Ce4+. We attribute the decrease in the lifetime of this signal to electrostatic repulsion between Ce4+ at the surface of TiO2(110) and positively charged trapped holes. It was also found that at the very short time scale (<2–3 ps) the fast decaying TAS signal of excited electrons in the conduction band is suppressed because of the presence of Ce4+ cations. Results point out that the presence of Ce4+ cations increases the residence time (mobility) of excited electrons and holes at the conduction band and valence band energy levels (instead of being trapped). This might provide further explanations for the enhanced reaction rate of water oxidation to O2 in the presence of Ce4+ cations.

Elucidating photocycle in large Stokes shift red fluorescent proteins: Focus on mKeima.

Large Stokes shift red fluorescent proteins (LSS-RFPs) are genetically encoded and exhibit a significant difference of a few hundreds of nanometers between their excitation and emission peak maxima (i.e., the Stokes shift). These LSS-RFPs (absorbing blue light and emitting red light) feature a unique photocycle responsible for their significant Stokes shift. The photocycle associated with this LSS characteristic in certain RFPs is quite perplexing, hinting at the complex nature of excited-state photophysics. This article provides a brief review on the fundamental mechanisms governing the photocycle of various LSS-RFPs, followed by a discussion on experimental results on mKeima emphasizing its relaxation pathways which garnered attention due to its >200 nm Stokes shift. Corroborating steady-state spectroscopy with computational studies, four different forms of chromophore of mKeima contributing to the cis-trans conformers of the neutral and anionic forms were identified in a recent study. Furthering these findings, in this account a detailed discussion on the photocycle of mKeima, which encompasses sequential excited-state isomerization, proton transfer, and subsequent structural reorganization involving three isomers, leading to an intriguing temperature and pH-dependent dual fluorescence, is explored using broadband femtosecond transient absorption spectroscopy.

Elucidating Structural Disorder in Ultra-Thin Bi-Rich Bismuth Oxyhalide Photocatalysts.

Advancing the field of photocatalysis requires the elucidation of structural properties that underpin the photocatalytic properties of promising materials. The focus of the present study is layered, Bi-rich bismuth oxyhalides, which are widely studied for photocatalytic applications yet poorly structurally understood, due to high levels of disorder, nano-sized domains, and the large number of structurally similar compounds. By connecting insights from multiple scattering techniques, utilizing electron-, X-ray- and neutron probes, the crystal phase of the synthesized materials is allocated as layered Bi24O31X10 (X = Cl, Br), albeit with significant deviation from the reported 3Dcrystalline model. The materials comprise anisotropic platelet-shaped crystalline domains, exhibiting significant in-plane ordering in two dimensionsbut disorder and an ultra-thin morphology in the layer stacking direction. Increased synthesis pH tailored larger, more ordered crystalline domains, leading to longer excited state lifetimes determined via femtosecond transient absorption spectroscopy (fs-TAS). Although this likely contributes to improved photocatalytic properties, assessed via the photooxidation of benzylamine, increasing the overall surface area facilitated the most significant improvement in photocatalytic performance. This study, therefore, enabled both phase allocation and a nuanced discussion of the structure-property relationship for complicated, ultra-thin photocatalysts.

Oxygen Vacancies Trigger Rapid Charge Transport Channels at the Engineered Interface of S-scheme Heterojunction for Boosting Photocatalytic Performance.

Although oxygen vacancies (Ovs) have been intensively studied in single semiconductor photocatalysts, exploration of intrinsic mechanisms and in-depth understanding of Ovs in S-scheme heterojunction photocatalysts are still limited. Herein, a novel S-scheme photocatalyst made from WO3-Ov/In2S3 with Ovs at the heterointerface is rationally designed. The microscopic environment and local electronic structure of the S-scheme heterointerface are well optimized by Ovs. Femtosecond transient absorption spectroscopy (fs-TAS) reveals that Ovs trigger additional charge movement routes and therefore increase charge separation efficiency. In addition, Ovs have a synergistic effect on the thermodynamic and kinetic parameters of S-scheme photocatalysts. As a result, the optimal photocatalytic performance is significantly improved, surpassing that of single component WO3-Ov and In2S3 (by 35.5 and 3.9 times, respectively), as well as WO3/In2S3 heterojunction. This work provides new insight into regulating the photogenerated carrier dynamics at the heterointerface and also helps design highly efficient S-scheme photocatalysts.

Oxygen Vacancies Trigger Rapid Charge Transport Channels at the Engineered Interface of S‐scheme Heterojunction for Boosting Photocatalytic Performance

Although oxygen vacancies (Ovs) have been intensively studied in single semiconductor photocatalysts, exploration of intrinsic mechanisms and in‐depth understanding of Ovs in S‐scheme heterojunction photocatalysts are still limited. Herein, a novel S‐scheme photocatalyst made from WO3‐Ov/In2S3 with Ovs at the heterointerface is rationally designed. The microscopic environment and local electronic structure of the S‐scheme heterointerface are well optimized by Ovs. Femtosecond transient absorption spectroscopy (fs‐TAS) reveals that Ovs trigger additional charge movement routes and therefore increase charge separation efficiency. In addition, Ovs have a synergistic effect on the thermodynamic and kinetic parameters of S‐scheme photocatalysts. As a result, the optimal photocatalytic performance is significantly improved, surpassing that of single component WO3‐Ov and In2S3 (by 35.5 and 3.9 times, respectively), as well as WO3/In2S3 heterojunction. This work provides new insight into regulating the photogenerated carrier dynamics at the heterointerface and also helps design highly efficient S‐scheme photocatalysts.

Localized surface-plasmon resonance effect as a new driver of Z-scheme electron transfer in cerium dioxide–graphitic carbon nitride heterojunctions

The intersecting interface between the two semiconductors of cerium dioxide (CeO2)–graphitic carbon nitride (g-C3N4) heterojunctions, which have demonstrated excellent photocatalytic activity, inhibits the rapid compounding of the photogenerated electron–hole pairs of g-C3N4. CeO2–g-C3N4 heterojunctions with Z-scheme and type-II electron-transfer routes were prepared via calcination in argon and air atmospheres, respectively. The built-in electric field theory cannot be used to explain the presence of a type-II electron-transfer route in CeO2–g-C3N4 heterojunctions. According the femtosecond transient absorption spectra, the localized surface-plasmon resonance (LSPR) effect of CeO2 drove the Z-scheme electron transfer in CeO2–g-C3N4 heterojunctions. The CeO2–g-C3N4 heterojunction exhibited a type-II electron-transfer route when the particle size of CeO2 increased, which attenuated the LSPR effect. The CeO2–g-C3N4 heterojunction with the Z-scheme electron-transfer route exhibited 4.4 times higher degradation efficiency for bamboo pulping wastewater than g-C3N4, and this result was attributed to the reduced complexation of photogenerated electron–hole pairs and extended photogenerated electron lifetime. Overall, this research provides a new idea for constructing Z-scheme electron-transfer heterojunctions.

Ultrafast Exciton Dynamics of CH3NH3PbBr3 Perovskite Nanoclusters.

Exciton dynamics of perovskite nanoclusters has been investigated for the first time using femtosecond transient absorption (TA) and time-resolved photoluminescence (TRPL) spectroscopy. The TA results show two photoinduced absorption signals at 420 and 461 nm and a photoinduced bleach (PB) signal at 448 nm. The analysis of the PB recovery kinetic decay and kinetic model uncovered multiple processes contributing to electron-hole recombination. The fast component (∼8 ps) is attributed to vibrational relaxation within the initial excited state, and the medium component (∼60 ps) is attributed to shallow carrier trapping. The slow component is attributed to deep carrier trapping from the initial conduction band edge (∼666 ps) and the shallow trap state (∼40 ps). The TRPL reveals longer time dynamics, with modeled lifetimes of 6.6 and 93 ns attributed to recombination through the deep trap state and direct band edge recombination, respectively. The significant role of exciton trapping processes in the dynamics indicates that these highly confined nanoclusters have defect-rich surfaces.

2,2′‐Thienoviologens with Low Reduction Potential for Electrochromism and Visible‐Light‐Driven Hydrogen Evolution Using g‐C3N4‐Based Composites via Hydrogen Bonds

AbstractA series of sulfur‐bridged 2,2′‐viologens, 2,2′‐thienoviologens (2,2′‐SV2+) with propyl bridge and hydroxyl bridges, are synthesized for the first time. The 2,2′‐thienoviologens exhibited improved visible‐light absorption, narrow energy gap, more negative reduction potential (160 mV lower than 4,4′‐thienoviologens) and more stable free radical states compared with 4,4′‐thienoviologens and parent 2,2′‐viologens. The utilization of femtosecond transient absorption (fs‐TA) demonstrated that 2,2′‐thienoviologen can produce distinct charge‐separated states under visible light excitation. Due to their excellent photophysical and electrochemical properties, the 2,2′‐thienoviologens are used for electrochromic devices and combined with g‐C3N4 via hydrogen bonds for visible‐light catalytic production. Based on the advantageous electron‐donating properties of 2,2′‐SV2+, the hydrogen release efficiency of the 2,2′‐thienoviologens‐modified composites is 8542 µmol·h−1·g−1, a value that is the highest reported for hydrogen production from organic small‐molecule‐modified g‐C3N4 and 78 times higher than that of unmodified g‐C3N4. This study presents a concise method to convert solar energy and broaden the potential applications of 2,2′‐viologens in photocatalytic systems.

Molecularly Tunable Heterostructured Co-polymers Containing Electron-deficient and -rich Moieties for Visible-light and Sacrificial-agent-free H2O2 Photosynthesis.

As an alternative to hydrogen peroxide (H2O2) production by complex anthraquinone oxidation process, photosynthesis of H2O2 from water and oxygen without sacrificial agents is highly demanded. Herein, a covalently connected molecular heterostructure is synthesized via sequential C-H arylation and Knoevenagel polymerization reactions for visible-light and sacrificial-agent-free H2O2 synthesis. The subsequent copolymerization of the electron-deficient benzodithiophene-4,8-dione and the electron-rich biphenyl (B) and p-phenylenediacetonitrile (CN) not only expands the π-conjugated domain but also increases the molecular dipole moment, which largely promotes the separation and transfer of the photoinduced charge carriers. The optimal heterostructured BTDB-CN0.2 manifested an impressive photocatalytic H2O2 production rate of 1920 μmol g-1 h-1, which is 2.2 and 11.6 times that of BTDB and BTDCN. As revealed by the femtosecond transient absorption (fs-TA) and theoretical calculations, the linkage serves as a channel for the rapid transfer of photogenerated charge carriers, enhancing the photocatalytic efficiency. Further, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) uncovers that the oxygen reduction reaction occurs through the step one-electron pathway and the mutual conversion between C=O and C-OH with the anchoring of H+ during the catalysis favored the formation of H2O2. This work provides a novel perspective for the design of efficient organic photocatalysts.

Molecularly Tunable Heterostructured Co‐polymers Containing Electron‐deficient and ‐rich Moieties for Visible‐light and Sacrificial‐agent‐free H2O2 Photosynthesis

As an alternative to hydrogen peroxide (H2O2) production by complex anthraquinone oxidation process, photosynthesis of H2O2 from water and oxygen without sacrificial agents is highly demanded. Herein, a covalently connected molecular heterostructure is synthesized via sequential C−H arylation and Knoevenagel polymerization reactions for visible‐light and sacrificial‐agent‐free H2O2 synthesis. The subsequent copolymerization of the electron‐deficient benzodithiophene‐4,8‐dione and the electron‐rich biphenyl (B) and p‐phenylenediacetonitrile (CN) not only expands the π‐conjugated domain but also increases the molecular dipole moment, which largely promotes the separation and transfer of the photoinduced charge carriers. The optimal heterostructured BTDB‐CN0.2 manifested an impressive photocatalytic H2O2 production rate of 1920 μmol g‐1 h‐1, which is 2.2 and 11.6 times that of BTDB and BTDCN. As revealed by the femtosecond transient absorption (fs‐TA) and theoretical calculations, the linkage serves as a channel for the rapid transfer of photogenerated charge carriers, enhancing the photocatalytic efficiency. Further, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) uncovers that the oxygen reduction reaction occurs through the step one‐electron pathway and the mutual conversion between C=O and C−OH with the anchoring of H+ during the catalysis favored the formation of H2O2. This work provides a novel perspective for the design of efficient organic photocatalysts.

Ultrafast planarization of photoexcited ligands in metal–organic frameworks gates charge transfer to promote photocatalysis

Metal–organic frameworks (MOFs) have emerged as a highly tunable class of porous materials with wide-ranging applications from gas capture to photocatalysis. Developing these exciting properties to their fullest extent requires a thorough mechanistic understanding of the structure–function relationships. We implement an ultrafast spectroscopic toolset, femtosecond transient absorption and femtosecond stimulated Raman spectroscopy (FSRS), to elucidate the correlated electronic and vibrational dynamics of two isostructural 1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy)-based MOFs, which manifest drastically different photocatalytic behaviors. Systematic comparisons between the M3+-TBAPy MOFs and bare ligands in various environments reveal the unproductive dimer formation in Al-TBAPy, whereas Sc-TBAPy is dominated by a catalytically active charge-transfer (CT) process. Two ground-state FSRS marker bands of the TBAPy ligand at ∼1267 and 1617 cm−1 probe the chromophore environment at thermal equilibrium. For comparison, the excited-state FSRS of Sc-TBAPy suspended in neutral water unveils a key ∼300 fs twisting motion of the TBAPy peripheral phenyl groups toward planarity, promoting an efficient generation of CT species. This motion also exhibits high sensitivity to solvent environment, which can be a useful probe; we also showed the CT variation for ultrafast dynamics of Sc-TBAPy in the glyphosate aqueous solution. These new insights showcase the power of table-top tunable FSRS methodology to delineate structural dynamics of functional molecular systems in action, including MOFs and other photosensitive “nanomachines.” We expect the uncovered ligand motions (ultrafast planarization) to enable the targeted design of new MOFs with improved CT state characteristics (formation and lifetime) to power applications, including photocatalysis and herbicide removal from waterways.

Cascaded *CO-*COH Intermediates on a Nonmetallic Plasmonic Photocatalyst for CO2-to-C2H6 with 90.6% Selectivity.

Oxygen vacancies (OV) in nonmetallic plasmonic photocatalysts can decrease the energy barrier for CO2 reduction, boosting C1 intermediate production for potential C2 formation. However, their susceptibility to oxidation weakens C1 intermediate adsorption. Herein we proposed a "photoelectron injection" strategy to safeguard OV in W18O49 by creating a W18O49/ZIS (W/Z) plasmonic photocatalyst. Moreover, photoelectrons contribute to the local multi-electron environment of W18O49, enhancing the intrinsic excitation of its hot electrons with extended lifetimes, as confirmed by in-situ XPS and femtosecond transient absorption analysis. Density functional theory calculations revealed that W/Z with Ov enhances CO2 adsorption, activating *CO production, while reducing the energy barrier for *COH production (0.054 eV) and subsequent *CO-COH coupling (0.574 eV). Successive hydrogenation revealed that the free energy for *CH2CH2 hydrogenation (0.108 eV) was lower than that for *CH2CH2 desorption for C2H4 production (0.277 eV), favouring C2H6 production. Consequently, W/Z achieves an efficient C2H6 activity of 653.6 μmol g-1 h-1 under visible light, with an exceptionally high selectivity of 90.6%. This work offers a new strategy for the rational design of plasmonic photocatalysts with high selectivity for C2+ products.

Cascaded *CO‐*COH Intermediates on a Nonmetallic Plasmonic Photocatalyst for CO2‐to‐C2H6 with 90.6% Selectivity

Oxygen vacancies (OV) in nonmetallic plasmonic photocatalysts can decrease the energy barrier for CO2 reduction, boosting C1 intermediate production for potential C2 formation. However, their susceptibility to oxidation weakens C1 intermediate adsorption. Herein we proposed a "photoelectron injection" strategy to safeguard OV in W18O49 by creating a W18O49/ZIS (W/Z) plasmonic photocatalyst. Moreover, photoelectrons contribute to the local multi‐electron environment of W18O49, enhancing the intrinsic excitation of its hot electrons with extended lifetimes, as confirmed by in‐situ XPS and femtosecond transient absorption analysis. Density functional theory calculations revealed that W/Z with Ov enhances CO2 adsorption, activating *CO production, while reducing the energy barrier for *COH production (0.054 eV) and subsequent *CO‐COH coupling (0.574 eV). Successive hydrogenation revealed that the free energy for *CH2CH2 hydrogenation (0.108 eV) was lower than that for *CH2CH2 desorption for C2H4 production (0.277 eV), favouring C2H6 production. Consequently, W/Z achieves an efficient C2H6 activity of 653.6 μmol g‐1 h‐1 under visible light, with an exceptionally high selectivity of 90.6%. This work offers a new strategy for the rational design of plasmonic photocatalysts with high selectivity for C2+ products.

Plasmon-Induced Ultrafast Hot Hole Transfer in Nonstoichiometric CuxInyS/CdS Heteronanocrystals.

Plasmonic semiconductors are promising candidates for developing energy conversion devices due to their tunable band gap, cost-effectiveness, and nontoxicity. Such materials exhibit remarkable capabilities for harvesting infrared photons, which constitute half of the solar energy spectrum. Herein, we have synthesized near-infrared (NIR) active CuxInyS nanocrystals and CuxInyS/CdS heterostructure nanocrystals (HNCs) to investigate plasmon-induced charge transfer dynamics on an ultrafast time scale. Employing femtosecond transient absorption spectroscopy, we demonstrate that upon exciting the HNCs with sub-band gap NIR photons (λ = 840 nm), the hot holes are generated in the valence band of plasmonic CuxInyS and transferred to the adjacent semiconductor. The decreased signal intensity and accelerated hole phonon relaxation dynamics for HNCs reveal efficient transfer of plasmon-induced hot carriers from CuxInyS to CdS under both 840 and 350 nm laser excitations, providing a pathway for enhanced carrier utilization. These findings shed light on the potential of ternary chalcogenides in plasmonic applications, highlighting efficient hot carrier extraction to adjacent semiconductors.

Axial coordinated manganeseporphyrin/tetraazaporphyrin-4-(10-phenylanthracen-9-yl)pyridine dyads: self-assembly, structure and spectral properties in ground and excited states.

Self-assembly of new donor-acceptor systems based on (5,10,15,20-tetraphenylporphinato)manganese(III)/(5,10,15,20-tetra-4-tert-butylphenylporphinato)manganese(III)/(octakis(4-tert-butylphenyl)tetraazaporphinato)manganese(III) acetate ((AcO)MnTPP/(AcO)MnTBPP/(AcO)MnTAP) and 4-(10-phenylanthracen-9-yl)pyridine (PyAn) was studied using fluorescence spectroscopy and mass spectrometry. It was found that the coordination complexes of 1:1 composition (dyads) are formed in toluene. The spectral properties, the chemical structures and redox behavior of the dyads were described using 1H NMR, IR, EPR spectroscopy and cyclic voltammetry, respectively. The dynamic processes and the characteristics in the excited state of the dyads were obtained using the femtosecond transient absorption spectroscopy method. Density functional theory (DFT), time-dependent DFT methods were used to elucidate the dyad electronic structures and to establish the differences in their frontier molecular orbitals. The analysis of the lambda parameter and the distance of hole-pair interaction was indicated more favorable charge transfer between the macrocycle and the axial PyAn fragment in (AcO)(PyAn)MnTAP. The calculated values of the zero-field splitting parameters D and E/D, together with the g tensors of the lowest spin-orbit state for (AcO)MnTPP and (AcO)(PyAn)MnTPP were obtained using the combination of DFT and Multireference Perturbation Theory (CASSCF/NEVPT2) simulations. The data obtained develop the fundamental basis in the field of photovoltaics and show the prospects for the study of molecular systems of this class.

Regulation of d-band center of TiO2 through fluoride doping for enhancing photocatalytic H2O2 production activity

Titanium dioxide (TiO2) has received extensive attention for photocatalytic hydrogen peroxide (H2O2) production, with the d-band center related to the adsorption performance, which affects the photocatalytic reaction process. Herein, an ingenious strategy to lower the antibonding-orbital occupancy in the Ti 3d orbital by fluoride ion (F−) doping is proposed, with density functional theory calculations predicting that F-doping into TiO2 induces a non-uniform charge distribution and enables an upshift of the d-band center in F/TiO2. This manipulation provides accessible active centers with favorable d-band energy levels, which can improve the charge-transfer behavior, strengthen the interaction between the adsorbed oxygen and the photocatalyst, and reduce the adsorption energy of oxygen, eventually promoting the photocatalytic H2O2 production rate. The experimental results further confirm that a lower antibonding-orbital occupancy can intensify the adsorption of atomic oxygen at the Ti sites. Electron paramagnetic resonance experiment reveals that the presence of F− ions in the lattice induces the formation of Ti3+ centers that localize the extra electron needed for charge compensation. Femtosecond transient absorption (fs-TA) spectroscopy suggests that photogenerated electrons are transferred from the conduction band of F/TiO2 to the Ti3+ surface states and surface F− ions, expediting the separation of electrons and holes. Consequently, with F− doping in TiO2, the photocatalytic H2O2 production yields improved from 277 to 467 μmol·g−1·h−1, with ethanol as a sacrificial reagent. This study provides a new strategy for regulating the d-band center to optimize the adsorption strength between the photocatalyst and oxygen atoms and achieve enhanced photocatalytic H2O2 production performance.

Cypate-sensitized upconversion nanoprobes for intracellular and in-vivo ATP ratiometric detection

As energy currency of life, adenosine triphosphate (ATP) is highly dynamic in living organisms. It is crucial yet challenging to probe intracellular or in-vivo ATP precisely without destruction of the living biological systems. Herein, we have designed novel ATP-responsive ratiometric nanoprobes by employing upconversion nanoparticles (UCNPs) with cypate as antennas. Nuclear magnetic resonance spectroscopy was used to analyze the interfacial interactions among lanthanide nanocrystal, cypate and adenosine phosphates, disclosing the origin of detection specificity. ATP induced interruption of energy transfer pathway in cypate-sensitized UCNPs was further investigated by femtosecond transient absorption and time-resolved photoluminescence spectroscopy. The nanoprobes with dual near-infrared (NIR)-excited ratiometric UCL were successfully applied for quantification of ATP level in living cells under vegetatively growing, starving, and glycolysis-inhibiting states, respectively. Furthermore, the increase of available energy by feeding for zebrafish larvae was confirmed through monitoring the in-vivo ATP variation with the nanoprobes. Such nanoprobes showed great potential in ATP-associated biological research and clinical applications. These findings may gain deep insights into the surface science and photophysics in dye-lanthanide nanocomposites, and open new avenues for the design and bioapplications of lanthanide nanoprobes.