Femtosecond Laser Damage Threshold Research Articles

Metal dielectric gratings with high femtosecond laser damage threshold of twice as much as that of traditional gold gratings

We report on the development of metal dielectric gratings (MDG) including two layers of gold film and a silica layer, which is simple and has enough broadband with 105 nm over 90%. The measured laser-induced damage threshold (LIDT) on the grating surface is 0.40 J/cm2 at a pulse duration of 32 fs, which is twice more than that of gold gratings, and the initial damage comes from nodule defects. Laser-induced ionization theory is first used to study the effect of nodule defects on LIDT of MDG and predict the maximum LIDT of the perfect MDG. The prediction value of the MDG without nodule defects is 0.60 J/cm2 on the grating surface, which has tremendous application potential in petawatt-class laser systems.

Wavelength dependence of femtosecond laser-induced damage threshold of optical materials

An experimental and numerical study of the laser-induced damage of the surface of optical material in the femtosecond regime is presented. The objective of this work is to investigate the different processes involved as a function of the ratio of photon to bandgap energies and compare the results to models based on nonlinear ionization processes. Experimentally, the laser-induced damage threshold of optical materials has been studied in a range of wavelengths from 1030 nm (1.2 eV) to 310 nm (4 eV) with pulse durations of 100 fs with the use of an optical parametric amplifier system. Semi-conductors and dielectrics materials, in bulk or thin film forms, in a range of bandgap from 1 to 10 eV have been tested in order to investigate the scaling of the femtosecond laser damage threshold with the bandgap and photon energy. A model based on the Keldysh photo-ionization theory and the description of impact ionization by a multiple-rate-equation system is used to explain the dependence of laser-breakdown with the photon energy. The calculated damage fluence threshold is found to be consistent with experimental results. From these results, the relative importance of the ionization processes can be derived depending on material properties and irradiation conditions. Moreover, the observed damage morphologies can be described within the framework of the model by taking into account the dynamics of energy deposition with one dimensional propagation simulations in the excited material and thermodynamical considerations.

Laser-induced damage thresholds of bulk and coating optical materials at 1030 nm, 500 fs

We report on extensive femtosecond laser damage threshold measurements of optical materials in both bulk and thin-film form. This study, which is based on published and new data, involved simple oxide and fluoride films, composite films made from a mixture of two dielectric materials, metallic films, and the surfaces of various bulk materials: oxides, fluorides, semiconductors, and ionic crystals. The samples were tested in comparable conditions at 1030 nm, 375 to 600 fs, under single-pulse irradiation. A large number of different samples prepared by different deposition techniques have been tested, involving classical materials used in the fabrication of optical thin film components (Ag, AlF3, Al2O3, HfO2, MgF2, Nb2O5, Pt, Sc2O3, SiO2, Ta2O5, Y2O3, and ZrO2) and their combination with codeposition processes. Their behaviors are compared with the surfaces of bulk materials (Al2O3, BaF2, CaF2, Ge, KBr, LiF, MgF2, NaCl, Quartz, Si, ZnS, ZnSe, and different silica glasses). Tabulated values of results are presented and discussed.

Femtosecond laser damage threshold of pulse compression gratings for petawatt scale laser systems

Laser-induced femtosecond damage thresholds of Au and Ag coated pulse compression gratings were measured using 800 nm laser pulses ranging in duration from 30 to 200 fs. These gratings differ from conventional metal-on-photoresist pulse compression gratings in that the gratings patterns are generated by etching the fused silica substrate directly. After etching, the metal overcoating was optimized based on diffraction efficiency and damage threshold considerations. The experiment on these gratings was performed under vacuum for single-shot damage. Single-shot damage threshold, where there is a 0% probability of damage, was determined to be within a 400-800 mJ/cm(2) range. The damage threshold exhibited no clear dependence on pulse width, but showed clear dependence on gold overcoat surface morphology. This was confirmed by electromagnetic field modeling using the finite element method, which showed that non-conformal coating morphology gives rise to significant local field enhancement near groove edges, lowering the diffraction efficiency and increasing Joule heating. Large-scale gratings with conformal coating have been installed successfully in the 500 TW Scarlet laser system.

Modeling of femtosecond laser damage threshold on the two-layer metal films

The heating processes of the single-layer gold thin film and the two-layer film assembly of gold padded with other metal (silver, copper and nickel) irradiated by femtosecond laser pulse are studied by the two-temperature model. It is found that the substrate metal can change energy transport, which is corresponding to the temperature changing process, and the thermal equilibrium time. Compared with the single-layer gold film at the same laser fluence, the two-layer film structure can change the damage threshold of the gold surface. Our results indicate that we can maximize the damage threshold of the gold film surface by altering the thickness ratio of the gold layer and the substrate layer in the two-layer film assembly.

Femtosecond laser direct processing in wet and dry silica glass

The infrared femtosecond laser damage threshold is found to be independent of OH content in pure silica glass. Additionally, the density and the mean trapping time of electrons excited in the conduction band are also found to be independent on OH concentration.

Femtosecond laser damage threshold and nonlinear characterization in bulk transparent SiC materials

Semi-insulating and conducting SiC crystalline transparent substrates were studied after being processed by femtosecond (fs) laser radiation (780 nm at 160 fs). Z-scan and damage threshold experiments were performed on both SiC bulk materials to determine each sample's nonlinear and threshold parameters. "Damage" in this text refers to an index of refraction modification as observed visually under an optical microscope. In addition, a study was performed to understand the damage threshold as a function of numerical aperture. Presented here for the first time, to the best of our knowledge, are the damage threshold, nonlinear index of refraction, and nonlinear absorption measured values.

The Study of Femto-Second Laser Induced Damage Threshold on Semi-Insulating GaAs Wafer

We demonstrated an experiment of femtosecond-laser damage threshold on GaAs wafer, the damage threshold was measured from 50 to 400fs. The mechanism was discussed through injection power, pulse duration and ablation profile. The results showed that the damage threshold increased with the pulse duration, the relationship between diameter of ablation hole and laser power density was also analyzed. It was concluded that the main factor affecting the damage threshold was photon ionization and collision ionization.