Femoral Neck Length Research Articles

Radiological and Anthropometrical Analysis of the Hip Joint Using Computed Tomography Scan in North Indian Population

Abstract Background: Anthropometric research on the hip joint has significant clinical implications, including (1) implant design and (2) avoiding implant mismatch complications, such as aseptic loosening and incorrect load distribution, which are mainly unknown in North India. The aim of this research is to ascertain the anatomical differences in the normal hip joint across individuals in North India and to statistically compare the results with global data. Materials and Methods: We used one hip topogram and one axial segment of the femoral head to analyze 100 people (35 females and 65 males) with normal hips between the ages of 20 and 65. In both sexes and on both sides, we determined the means of the following measurements: femoral head diameter (HD), femoral neck width (NW), femoral neck length, acetabular angle of sharp, femoral version, horizontal offset, acetabular version, and vertical offset. Results: The following are the mean parameters that were observed: (a) neck shaft angle (NSA) - 128.93°, (b) femoral HD = 4.29 cm, (c) femoral NW = 2.97 cm, (d) femoral neck length = 3.61 cm, (e) Acetabular angle of Sharp - 33.01°, (f) Acetabular version = 20.44°, (g) femoral Version = 21.57°, (h) horizontal offset = 3.62 cm, and (i) Vertical offset = 4.43 cm. Conclusion: The NSA and acetabular angle of sharp were 5°–6° more when compared to the western population while horizontal and vertical offset is comparatively less than Western population and in the Indian NSA was higher for North Eastern population than the North Indian population. The residual parameters were comparable to those found in Western literature.

TRUE FEMORAL NECK LENGTHENING OSTEOTOMY WITH PERIACETABULAR OSTEOTOMY FOR COXA BREVA THROUGH SURGICAL HIP DISLOCATION

Sequelae of Legg-Calve -Perthes disease (LCPD) and treatment of developmental dysplasia of the hip (DDH) can present a coxa breva or coxa magna deformity, sometimes associated with coxa vara. This unique deformity decreases the efficiency of the abductor mechanism, causing a Trendelenburg gait and hip pain, leg length discrepancy and leads to intra- and extra-articular impingement, and eventually osteoarthritis. Several surgical techniques have been advocated to treat this kind deformity, such as great trochanter transfer, relative femoral neck lengthening. We evaluated primary results of true femoral neck-lengthening osteotomy (TFNLO) in combination with periacetabular osteotomy (PAO) for treatment of Coxa Breva through surgical hip dislocation (SHD).Fourteen patients with Coxa Breva received true femoral neck lengthening osteotomy in combination of PAO through SHD between March 2020 and October 2023. Ten patients with minimum 1 year followed-up were retrospectively reviewed clinically and radiographically. Eight patients had Perthes disease, 2 had DDH received closed reduction and fixation during childhood. The mean age at surgery was 16 years (range, 12 to 31 years). Clinical findings, radiographic analyses including the change in horizontal femoral offset and the leg length discrepancy as well as complications were assessed.Horizontal femoral offset improved 19.5mm(6–28mm). Limb length increase 16.8mm(11–30mm). Mean HHS increased from 80.6(66–91) to 91.8(88–96). Complication: screw broken in 1(no need operation). Asymptomatic fibrous union of the great trochanter was found in 1. No infection and joint space narrow as well as nerve palsy happened.TFNLO combined with PAO can be effective for the treatment of patients with Coxa breva. But long term follow up is warranted.

The short external rotator muscles of the hip: a cadaveric study on 18 specimens with clinical implications.

The short external rotator muscles (SERMs) of the hip are composed of six postural muscles that constitute a single functional unit that is aligned to coapt the articular surfaces of the hip joint, providing dynamic stability. This study aims to provide a morphometric evaluation of this unit that could benefice clinical practice. In particular, the implication of the morphology and direction of the hip triceps tendon when performing a posterolateral approach for total hip arthroplasty. A total of 18 cadaveric hips were dissected rigorously. Variations of the origin, course and insertion of all SERMs were recorded and quantified. Measurements were conducted for the following parameters: total muscle lengths, intra-muscular and extra-muscular tendon lengths, muscle sagittal and frontal angles, and femoral neck length. Correlation was searched for between total muscle length and femoral neck length. Results were as follows: (a) the obturator internus and externus muscles insert quasi perpendicularly on the proximal femur, (b) both gemelli take distal insertion onto the tendon of the obturator internus to form the hip triceps tendon, (c) morphometric data of the studied parameters was reported, and (d) moderate to high correlation with femoral neck length was found for all muscles but the quadratus femoris. Our results showed that the direction of the hip triceps tendon is always orthogonal to the proximal femur in the frontal plane. Such anatomical reference could be used when performing total hip arthroplasty with the posterolateral approach. Future research is needed to assess whether the easy identification and re-insertion of the hip triceps could reduce leg length discrepancy and offset.

Do all short stem types restore biomechanical parameters of the hip? Comparison according to femoral neck osteotomy levels.

There is no consensus on ideal short femoral stem design. A classification system proposed by Feyen and Shimmin divides short stems in two types according to femoral neck osteotomy levels: subcapital (IIIA) and standard (IIIB). The study aims to determine which design type is more successful in restoring native biomechanical parameters and whether stem type has an impact on clinical results. In this retrospective comparative study, patients that have undergone short stem hip arthroplasty were evaluated according to stem types: type IIIA (n = 52, 66.7%) (Mathys Optimys) and IIIB (n = 26, 33.3%) (Implantcast Aida and Smith & Nephew SMF). Pelvis X-rays were assessed in terms of femoral neck length, horizontal and vertical hip centres of rotation, horizontal and vertical femoral offsets, abductor lever arm lengths, leg lengths, and stem-shaft angles. Improvement in Harris hip scores, differences between post-operative and pre-operative measurements, and stem-shaft angles were evaluated and compared between two groups. Mean femoral neck resection (8.27 ± 6.68mm in IIIA and 15 ± 6.33mm in IIIB) was significantly different between both groups (p < 0.001). Harris hip scores were increased at post-operative six months in both groups with no difference (84.4 ± 6.4 and 84.6 ± 5.5, p = 0.4). The absolute values of differences between pre-operative and post-operative horizontal centres of rotation (p = 0.63), vertical centers of rotation (p = 0.75), horizontal femoral offsets (p = 0.78), vertical femoral offsets (p = 0.83), abductor lever arm distances (p = 0.63), and leg length (p = 0.21) measurements were not different between both groups. Stem positions were both varus with no statistically significant difference between groups (p = 0.14). We found no difference regarding restoration of biomechanical parameters between short stem designs with different levels of neck osteotomy. Additionally, short stem can mostly result in varus component positioning regardless of the level of neck osteotomy.

Change of joint line convergence angle and other coronal alignments after total hip arthroplasty

BackgroundThe purpose of this study was to determine the unloading effect of total hip arthroplasty (THA) on the ipsilateral knee joint through the joint line convergence angle (JLCA) change and determine the changes in other coronal radiographic parameters after THA, and evaluate the sensitivity of JLCA. Patients and methodsWe retrospectively assessed 70 patients who underwent unilateral THA. Hip parameters such as neck shaft angle (NSA), neck length, and femoral offset and coronal alignment parameters of the lower extremity such as hip–knee–ankle angle (HKA), femur length, mechanical lateral distal femoral angle (mLDFA), JLCA, medial proximal tibial angle (MPTA), lateral distal tibial angle (LDTA), and plafond talus angle (PTA) were measured in the operative and non-operative sides. We compared all hip and coronal alignment parameters between before and 1 year after THA, and the amount of standardized changes (Δ) between all hip and coronal alignment parameters on the operative side, respectively. ResultsAll mean hip and coronal alignment parameters on the operative side changed significantly 1-year after THA; however, those on the non-operative side did not. On the operative side, mean JLCA and PTA changed in the direction of closing the joint lateral space, from 1.81° and 0.47° to 1.22° and 0.11°, respectively (p<0.001 and 0.046, respectively). Mean NSA, HKA, and mLDFA changed in the valgus direction, from 129.39°, 2.62°, and 86.69° to 133.54°, 1.53°, and 85.91°, respectively (p<0.001). Mean femoral offset, neck length, and femur length increased from 36.45mm, 47.83mm, and 429.20mm to 39.85mm, 55.06mm, and 436.33mm, respectively (p<0.001). Mean MPTA and LDTA increased from 85.43° and 87.50° to 86.73° and 90.38, respectively (p<0.001). JLCA was more vulnerable to change than HKA, femur length, mLDFA, MPTA, and PTA (p<0.05). DiscussionJLCA change on the operative side was more sensitive than changes of other coronal alignments after THA. According to the cohort, THA might have an unloading effect on the medial compartment of the knee joint. Level of evidenceIV; retrospective case-control and cohort studies.

Morphometry of proximal femur in South Indian Population

Background: Proximal femur analysis plays a vital role in orthopedic surgery, implant design, fracture care, and research. Studying this complex bone helps surgeons select the right implants, plan fracture treatment, and understand bone strength. This growing field improves clinical outcomes and enhances scientific knowledge. Our study analyzes the morphometry of proximal femur, particularly the head and neck, to further explore its implications. Aims and Objectives: To study the morphometric measurements of the proximal end of the femur quantitatively in the South Indian population from the dry femora available in the Department of Anatomy, Government Medical College, Kottayam. Materials and Methods: This cross-sectional study was conducted in 101 dry femora available in the Department of Anatomy, Government Medical College, Kottayam. The measurements were taken with digital Vernier calipers and a goniometer. All continuous variables were expressed as mean with standard deviation. Statistical differences between the right and left sides were analyzed with Student’s independent sample t-test (for parametric variables) and Mann–Whitney U test (for non-parametric variables). Results: The mean vertical and anteroposterior diameter of the femoral head, superior and inferior length of the femoral head, the anteroposterior and vertical diameter of the femoral neck, superior and inferior lengths of the femoral neck, neck-shaft angle, and intertrochanteric length were 39.61±3.29 mm, 40.17±3.14 mm, 33.01±3.6 mm, 23.88±4.32 mm, 24.22±3 mm, 29.59±3 mm, 21.75±3.81 mm, 32.03±5.58 mm, 124.11±6.37, 60.31±7.33 mm, respectively. There was a statistically significant difference in the mean of neck anteroposterior diameter and neck-shaft angle between the right and left sides where the left side had the higher value. Conclusion: Notable skeletal metric variations exist amidst different populations. Proximal femoral dimensions can be acquired through either manual means or radiological information. These measurements can be used in designing orthopedic implants for the South Indian population.

Association of Relative Skeletal Immaturity of the Triradiate Cartilage with Increased Proximal Femoral Deformity in Prophylactic Fixation for Slipped Capital Femoral Epiphysis: A Radiographic Study.

The purpose of this study was to describe proximal femoral deformity after contralateral hip prophylactic fixation of slipped capital femoral epiphysis (SCFE) in patients and the association of relative skeletal immaturity with this deformity. A retrospective review of patients presenting with a SCFE was conducted from 2009 to 2015. Inclusion criteria were (1) radiographic evidence of a unilateral SCFE treated with in situ fixation, (2) contralateral prophylactic fixation of an unslipped hip, and (3) at least 3 years of follow-up. Measurements were made on radiographs and included greater trochanter height relative to the center of the femoral head, femoral head-neck offset, and femoral neck length. Skeletal maturity was evaluated by assessing the status of the proximal femoral physis and triradiate cartilage (TRC) of the hip, in addition to the length of time to closure of these physes. Values were compared from initial presentation to final follow-up. Statistical analysis included descriptive statistics and linear regression. Twenty-seven patients were included. Bivariable linear regression demonstrated that an increased relative trochanteric overgrowth was associated with TRC width (β = 3.048, R = 0.585, P = 0.001) and an open TRC (β = -11.400, R = 0.227, P = 0.012). Time to proximal femoral physis closure (β = 1.963, R = 0.444, P = 0.020) and TRC closure (β = 1.983, R = 0.486, P = 0.010) were predictive of increased deformity. In addition, multivariable elimination linear regression demonstrated that TRC width (β = 3.048, R = 0.585, P = 0.001) was predictive of an increased relative trochanteric overgrowth. Patients with an open TRC and increased TRC width are associated with increased relative trochanteric overgrowth when undergoing prophylactic fixation for a unilateral SCFE. Increased caution should be exercised when considering contralateral hip prophylactic fixation in skeletally immature patients presenting with a unilateral SCFE. Level IV, case series.

How Do the Morphological Abnormalities of Femoral Head and Neck, Femoral Shaft and Femoral Condyle Affect the Occurrence and Development of Medial Knee Osteoarthritis.

At present, the main viewpoint is that tibial varus is the main reason of medial knee osteoarthritis (OA), and high tibial osteotomy (HTO) is also the main alignment correction method to correct medial knee OA. In contrast, the impact of the anatomical alignment of the femur on medial knee OA is often overlooked. We evaluated the increased risk for medial knee OA because a varus alignment could be attributed to the anatomical reasons that include hip anatomy, femoral shaft bowing (FSB) and femoral condylar dysplasia. The present research adopted a cross-sectional study method. We selected 62 patients with HTO in the Third Hospital of Hebei Medical University from June 2021 to March 2022 as the HTO group and 55 healthy volunteers as the control group. Femoral neck-shaft angle (NSA), lateral FSB, mechanical lateral distal femoral angle (mLDFA) and hip-knee-ankle (HKA) was radiographically examined within the two groups. The femoral neck length and offset were also measured, and the ratio is represented by the ratio of the femoral neck length to off-set (N/O). The 2-tailed Student t-test was used to compare the differences between groups when the data were in accordance with a normal distribution. Otherwise, the Mann-Whitney U tests was used to compare the differences between groups. Compared to the control group, the HTO group had a higher offset (p < 0.05), greater femoral neck length (p < 0.05), and decreased (more varus) NSA (p < 0.05). The HKA in the HTO group was 172.20 ° (3.50°), which was significantly lower than that of the control group 177.00° (3.05°), (p < 0.001), while the medial OA was associated with more varus HKA. The mean mLDFA was 89.10 ° (2.35°) and 87.50° (2.85°) in the HTO and control groups (p < 0.005), respectively. The mean lateral FSB values of the full-length radiographs were larger (p < 0.001) in the HTO group (4.24° ± 3.25°) than that in control group (1.16° ± 2.32°). The reduction of NSA (coxa vara) and the increase of the mLDFA can lead to medial knee OA, while the lateral FSB also affects medial OA. We believe that femoral deformity is also one of the cause of the medial knee OA. Therefore, it is necessary to evaluate the joint deformity of the femur and tibia before surgery in order to determine whether to use HTO alone to correct the lower limb alignment.

Is Sliding Compression Necessary for Intramedullary Nailing Fixation of AO/OTA Type A3.3 Intertrochanteric Fracture?

The intramedullary nail is considered the gold standard for treating AO/OTA type A3.3 intertrochanteric fractures. However, it still faces a significant rate of failure, mainly due to the critical factor of comminuted lateral wall defects leading to inadequate proximal sliding compression. The primary objective of this study is to investigate the requirement of sliding compression in the treatment of unstable AO/OTA type A3.3 intertrochanteric fractures. To achieve this, we conduct a comparative analysis between two approaches: InterTAN alone and proximal femoral anti-rotation blade nailing (PFNA) combined with lateral wall reconstruction for treating AO/OTA type A3.3 intertrochanteric fractures with lateral wall damage. A retrospective analysis was conducted on the clinical data of patients who underwent intramedullary nailing fixation for AO/OTA type A3.3 intertrochanteric fractures at our hospital from January 2012 to January 2022. Patient characteristics as well as treatment details, including operative time, intraoperative blood loss, weight-bearing time, fracture healing time, tip apex distance (TAD) loss, Harris hip scores (HHS), Parker-Palmer mobility score (PPMS), and postoperative complications, were collected and analyzed. Continuous variables were analyzed using independent sample t-tests, while categorical variables were examined using the chi-square test. For group comparisons, variance analysis was applied, and pairwise comparisons were conducted using the LSD-t test. These patients were divided into PFNA combined with lateral wall reconstruction group (sliding compression group) and InterTAN fixation group (static fixation group) based on surgical methods. The operation time, intraoperative bleeding loss, HHS at 12 months and PPMS at 12 months in the sliding compression group were significantly higher than those in the static fixation group, and time to weight-bearing and fracture healing time were significantly lower than those in the static fixation group (p < 0.05). There were no significant differences between two groups in terms of the TAD at 2 days, 2, and 12 months postoperatively, the incidence of complications (p > 0.05). At 6 months postoperatively, femoral neck length was shortened compared to 2 days postoperatively in both groups, and the sliding compression group had a significantly greater degree of femoral neck shortening than the static fixation group (p < 0.05). The use of PFNA with lateral wall reconstruction for A3.3 intertrochanteric fractures demonstrated superior mobility, efficiency, and reduced internal fixation failure rates compared to InterTAN. These findings suggest that sliding compression may be required for intramedullary nailing treatment.

Femoral Head Reduction Osteotomy versus Relative Femoral Neck Lengthening in Management of Perthes Sequelae: A Systematic Review and Meta-Analysis

Background The single most important predictor determining the long-term prognosis following healed Perthes disease is the shape of the proximal femur. A high riding greater trochanter, a short femoral neck, and proximal femur abnormalities can induce both intraarticular and extra-articular femoro-acetabular impingement, resulting in degenerative hip discomfort, limited range of motion, and decreased abductor function. Aim of the Work to perform systematic review about surgical techniques in treatment of perthes in young adult population. Patients and Methods We searched the MEDLINE database via PubMed, EMBASE, and Cochrane Library using the following Keywords; “Legg-Calve-Perthes”, “Perthes' disease”, “osteotomy”, “surgical hip dislocation in perthes” and “young adult population”. Results Seven full text articles met our inclusion criteria and were included in the final analysis. Conclusion The single most important predictor determining the long-term prognosis following healed Perthes disease is the shape of the proximal femur. A high- riding greater trochanter, a short femoral neck, and proximal femur abnormalities can induce both intraarticular and extra-articular femoro- acetabular impingement, resulting in degenerative hip discomfort, limited range of motion, and decreased abductor function.

Differences in Kinematic Changes From Self-Selected to Fast Speed Gait in Asymptomatic Adults With Radiological Signs of Femoro-Acetabular Impingement.

Femoro-acetabular impingement (FAI) may present as alterations in the skeletal morphology of the hip. Repercussions of FAI can be witnessed in self-selected speed walking as well as physical exercise such as running or fast speed walking. The aim of this study was to investigate changes in kinematics at different gait speeds in subjects presenting with radiological findings invoking FAI. One hundred thirty asymptomatic adults underwent biplanar X-rays with a calculation of 3D hip parameters: acetabular anteversion, abduction and tilt, vertical center edge angle (VCE), femoral anteversion, neck-shaft angle, acetabular coverage of the femoral head, femoral head diameter and neck length. Parameters were classified according to FAI clinical thresholds. Two groups were created: Control group (63 subjects having up to one subnormal hip parameter in favour of FAI) and Radiographic FAI group (67 subjects having ≥2 subnormal hip parameters that might cause FAI). All subjects underwent 3D gait analysis at self-selected and fast speed, from which kinematic parameters were generated. Arithmetic differences between fast and self-selected speed gait were considered as gait changes. Subjects in the Radiographic FAI group had decreased acetabular tilt (24 vs. 19˚), anteversion (19 vs. 16˚), abduction (55 vs. 53˚), femoral anteversion (18 vs. 14˚) and increased VCE (29 vs. 33˚, all p<0.05), compared to controls.Changes from self-selected to fast speed showed that subjects in the Radiographic FAI group had lower range of motion (ROM) pelvic rotation (7 vs. 4˚) and ROM hip flexion/extension (10 vs. 7˚), reduced hip extension (-4 vs. -2˚) and step length (16 vs. 13 cm; all p<0.05). The Radiographic FAI group had decreased acetabular abduction, anteversion and femoral anteversion in favour of FAI. When adapting from self-selected to fast speed gait, the Radiographic FAI group seemed to limit pelvic rotation and hip flexion/extension resulting in a decrease in step length. These kinematic limitations were previously reported in subjects with symptomatic FAI. Gait analysis could be considered as a functional diagnostic tool to assess FAI along with radiological assessment.

Simple Minimally Invasive Method to Reduce Valgus-Impacted and Tilted Femoral Neck Fractures without Soft Tissue or Cartilage Injury: Radiological and Clinical Results.

This is a rare study comparing the radiological and functional outcomes of fixation after reduction with in situ fixation group using Femoral Neck System (FNS). The aim of this study was to introduce a simple, innovative, minimally invasive method to reduce valgus-impacted and tilted femoral neck fractures without soft tissue or cartilage injury. A retrospective comparative analysis of 46 patients between May 2020 and February 2022 was performed. In the control group, 23 patients underwent in situ fixation without reduction. In the study group, another 23 patients were managed by fixation after reduction using a percutaneous pull-out technique with a full threaded Steinmann pin. Caput-collum-diaphysis (CCD) angle, tilt, and femoral neck shortenings were compared between the two groups. In addition, Harris Hip Score (HHS) was evaluated and compared at 1 year after surgery. Basically, independent samples t-test was used to compare radiological and functional results. Patients' initial valgus and tilt angles were not significantly different between the groups (n.s.). However, the CCD and tilt angles measured immediately and at one year postoperatively were significantly different between the groups (p < 0.05). Regarding femoral neck shortening, shortening in the three directions, the x, y, and z vectors, was significantly less in the reduction group immediately postoperatively and at 1 year post-surgery (p < 0.05). The mean HHS at 1 year postoperatively was 79.7 ± 8.4 in the in situ fixation group and 87.9 ± 6.6 in the reduction groups, and there was a significant difference (p < 0.05). The pull-out method with a threaded Steinmann pin to reduce valgus-impacted and tilted femoral neck fracture is safe and effective for accomplishing anatomical restoration. This may achieve successful bone union and maintain the femoral neck length and original tilt without nearby soft tissue or cartilage injury.

Medium-term outcomes of conventional versus short uncemented femoral stems for primary total hip arthroplasty in patients younger than 55 years.

Short stems are designed with a bone preservation philosophy in mind. This study aims to compare the outcomes/complications and survival of a collarless fully hydroxyapatite (HA)-coated conventional tapered stem and a HA-coated partial neck-retaining uncemented short stem in patients ⩽55 years old at medium-term follow-up. We retrospectively studied 247 uncemented THAs operated between 2010 and 2014, comparing 146 patients treated with the fully HA-coated collarless stem (Group A) with 101 patients treated with a partial neck preserving, HA-coated short stem (Group B). 87 and 62 males were in groups A and B, respectively (p = 0.11). The mean age of the series was 46 years (17-55) (p =0.16). The mean follow-up of groups A and B were 9.9 (7-12) years and 9.7 (7-12) years, respectively (p =0.21). Mean Harris Hip Score improved from 55 to 92 in group A (p <0.001) and from 54 to 95 in group B (p <0.001), without differences between groups. Mean femoral neck length preservation in groups A and B was 13.6 (0-28) mm and 26 (11-38) mm, respectively (p =0.001). 13 (8.9%) and 1 (1%) patients in groups A and B presented postoperative complications, respectively (p =0.008). The conventional stem group had more aseptic loosening (Group A 3.4% vs. Group B 0%, p =0.06) along with more Symptomatic radiolucent lines (Group A 3.4% vs. Group B 0%, p =0.06). Both conventional and short stems showed excellent implant survival rates and functional outcomes at a mean follow-up of 9.8 years. However, complications and radiolucent lines were more frequent with a collarless conventional-length stem. Bone preservation of the femoral neck and diaphysis may be preferred in active young patients.

The effect of pre-fracture proximal femur geometry on hip fracture type in elderly patients.

This study aimed to analyze the relationship between fracture type by determining data on the geometry of the proximal femur in the pre-fracture period in patients over 65 years of age who had hip fractures as a result of low-energy trauma. A total of 127 patients who were admitted to the hospital for reasons other than hip pathology within 1 year before the occurrence of hip fracture and who had an anterior-posterior pelvic X-ray were included in the study. Measurements were made to evaluate the proximal femur geometry, neck shaft angle, central edge angle, femoral head diameter, femoral neck diameter, femoral neck length, femoral offset length, femoral neck axial length, hip axis length, and femoral shaft diameter. As a result of these measurements, analyses were performed to determine the relationship between the control group and fracture types. The mean Neck shaft angle scores were significantly higher in both fracture types than in the control group (P = .034, P = .002). The mean Femoral offset length values of both fracture types were lower than those of the control group (P = .002, P = .011, respectively). Multiple logistic regression analysis revealed that the risk of collum femoris fracture increased as the Femoral head diameter value increased. (OD = 0.21, P = .002). The geometric parameters of the proximal femur play an important role in the formation of hip fracture types. Therefore, differences in proximal femur geometry in hip fracture types should be considered, and patient-focused choices should be made regarding the surgical procedures and implants to be used during fracture fixation.

Short-Term Complications of Relative Femoral Neck Lengthening Combined with Extra-Articular Osteotomies of the Proximal Femur.

Relative femoral neck lengthening (RNL) is a newer technique to correct coxa breva and coxa vara to relieve a femoro-acetabular impingement and improve hip abductor function without changing the position of the head on the shaft. Proximal femoral osteotomy (PFO) changes the position of the femoral head relative to the shaft. We studied the short-term complications of procedures that combined RNL with PFO. All hips that underwent RNL and PFO using a surgical dislocation and extended retinacular flap development were included. Hips that were treated only with intra-articular femoral osteotomies (IAFO) were excluded. Hips that underwent RNL and PFO, with IAFO and/or acetabular procedures were included. Intra-operative evaluation of the femoral head blood flow was performed with the drill hole technique. Clinical evaluation and hip radiographs were obtained at 1week, 6weeks, 3months, 6months, 12months and 24months. Seventy two patients (31 males, 41 females, 6-52years of age) underwent 79 combined RNL and PFO. 22 hips underwent additional procedures like head reduction osteotomy, femoral neck osteotomy, and acetabular osteotomies. There were 6 major and 5 minor complications noted. Two hips developed non-unions, both with basicervical varus-producing osteotomies. Four hips developed femoral head ischemia. Two of these hips avoided collapse with early intervention. One hip had persistent abductor weakness requiring hardware removal and three hips, all in boys developed symptomatic widening of the hip on the operated side from varus-producing osteotomy. One hip had asymptomatic trochanteric non-union. RNL is routinely performed by releasing the short external rotator muscle tendon insertion from the proximal femur to raise the posterior retinacular flap. Though this technique protects the blood supply from direct injury, it seems to stretch the vessels with major corrections in the proximal femur. We recommend evaluating the blood flow intraoperatively and postoperatively and taking necessary steps early to decrease the stretch on the flap. It may be safer to avoid raising the flap for major extra-articular proximal femur corrections. The results of this study suggest ways to improve the safety of procedures that combine RNL and PFO.

Anatomical Features of the Proximal Femur in the Turkish Population

Different populations have different genetic traits, and this causes various anatomical features to emerge. Orthopedic implants used in Turkey are generally of Western origin, and these implants are designed based on the anatomical features of Western populations. This study aimed to evaluate the compatibility of existing implants for the Turkish population by revealing the anatomical features of the proximal femurs of individuals from the Turkish population while also constituting a helpful source of data on newly developed implants. A total of 1920 proximal femurs of 960 patients were evaluated via images obtained by Computer Tomography. Twenty patients (10 females and 10 males) for each age within the age range of 18-65 years were included. Femoral head diameter, femoral neck width, femoral neck length, medullary canal width, and collodiaphyseal angle were measured. The right and left femoral head diameter was 46.46±3.84 mm, 46.50 ±3.85 mm respectively. The right and left femoral neck width was 30.63±3.4 mm, 30.85±3.29 mm respectively. The neck length was 94.62±8.33 mm for the right proximal femur, it was 94.75±8.19 mm for the left. The width of the medullary canal was 15.46±2.25 mm for the right proximal femur and 15.53±2.20 mm for the left. The right and left hips, the collodiaphyseal angles were 133.06±2.39° and 133.13±2.36°. Anatomical features of the proximal femur vary according to age, sex, and race. This study may be used as an important resource for the evaluation of patients’ compatibility with existing implants and for the design of new implants.

Computed tomography image analysis for Indonesian total hip arthroplasty designs

&lt;span lang="EN-US"&gt;Total hip arthroplasty purposes to replace a hip joint damaged by an artificial hip joint. However, the developed products that already exist in the market lead to the mismatch between the hip implant equipment and the patient’s bone morphometric. Besides causing complications, the mismatch also continues to the dislocation effects, fracture, osteolysis, and thigh pain. This paper aims to design a customized hip implant based on real patient data, particularly for Indonesian patient, limited to the acetabular components and stem parts. The computed images were analyzed to estimate the patient proximal femur morphometric; those are the femoral head diameter, neck-shaft angle, mediolateral width, anteroposterior width, neck length and neck width. The experiment has succeeded in designing the acetabular shell with the thickness of 3 mm, the acetabular liner with the thickness of 6 mm, the femoral head between 22.4 to 24.8 mm, the short stem in both the right for 110.656 mm and left femur bone for 111.49 mm; that fit the patient's femur bone. Overall, the proposed steps in designing the customized hip implant in this work, based on image analysis on medical imaging data, can be a standard to be applied for other patient-needs hip arthroplasty implants.&lt;/span&gt;

Clinical analysis of extended PFNA combined with MIPPO plate for reconstruction of lateral wall in treatment of AO-A3.3 intertrochanteric fracture

To compare the clinical efficacy of lengthened proximal femoral nail anti-rotation(PFNA) combined with minimally invasive percutaneous plate osteosynthesis(MIPPO) and common PFNA in the treatment of AO-A3.3 intertrochanteric fracture. The clinical data of 58 patients with AO-A3.3 intertrochanteric fracture treated from January 2015 to April 2020 were retrospectively analyzed. Among them, 27 patients were treated with extended PFNA + MIPPO plate to reconstruct the lateral wall (group A), and 31 patients were treated with closed reduction and PFNA fixation (group B). The bleeding volume, operation time, femoral neck length and tip apex distance(TAD), fracture healing time and postoperative complications were observed and compared between two groups. Harris score was used to evaluate hip joint function 10 months after operation. All patients were followed up for 12 to 28 months. The incision healed well after operation. The bleeding volume and operation time of group A were significantly more than that of group B (P<0.05), and the fracture healing time of group A was significantly less than that of group B(P<0.05). There was no significant difference in the length of femoral neck between two groups at 2 days after operation(P>0.05). The length of femoral neck at 6 months after operation in each group was shorter than that at 2 days after operation(P<0.05), and the shortening of femoral neck at 6 months after operation in group B was significantly shorter than that in group A(P<0.05). There was no significant difference in TAD values between two groups at the same time point(P>0.05) at 2 days and 6 months after operation. There was no significant difference in TAD values between 2 days and 6 months after operation(P>0.05). The incidence of complications in group B was significantly higher than that in group A(P<0.05). The Harris scores of hip joint function in group A were higher than those in group B 10 months after operation (P<0.05). Compared with the treatment of AO-A3 femoral intertrochanteric fracture with closed reduction and PFNA fixation, the lengthened PFNA combined with MIPPO small plate for reconstruction and fixation of the lateral wall can promote the fracture healing, improve the patient's functional recovery, and significantly reduce the complications.

Guided Growth Improves Coxa Valga and Hip Subluxation in Children With Hereditary Multiple Exostoses.

In children with severe hereditary multiple exostoses (HME), coxa valga, and hip subluxation are common deformities. The literatures related to surgical management and prevention of hip joint subluxation in HME are scarce. In this study, we aimed to investigate the efficacy of guided growth procedure to correct coxa valga and hip subluxation in HME patients. We retrospectively retrieved 12 patients who received guided growth procedures for coxa valga and hip subluxation in HME patients with proximal femur exostoses with a minimum follow-up time of 2 years between 2012 and 2019. Radiographic parameters include head-shaft angle, Hilgenreiner-epiphyseal angle, acetabular index, Reimer migration percentage, center-edged angle, articulo-trochanteric distance, and femoral neck length for comparison between preoperative and latest follow-up results. It was conducted statistically by paired t test and Wilcoxon signed rank test. In this study, the mean difference between preoperative and latest follow-up was significant in head-shaft angle (12±5 degrees; CI, 10-14; P<0.001), Hilgenreiner-epiphyseal angle (12±5 degrees; CI, 10-15; P<0.001), and MP (7%±8%; CI, 3-11; P=0.001). There was a low revision rate (4 of 21, 19%) and no complication in our study. Compared with previous studies on guided growth in children with cerebral palsy and developmental dysplasia of the hip, our study showed good comparable outcomes. The results indicated that guided growth improves the hip radiographic parameters of children with HME and may prevent coxa valga and hip subluxations. It is a safe procedure and provides predictable results. Level IV; therapeutic, case series.

Proximal femur geometry: a major predictor of proximal femur fracture subtypes.

Proximal femur geometry (PFG) represents an important risk factor for the occurrence of hip fractures. There are currently few studies regarding the correlation between PFG and the occurrence of a specific fracture subtype, and those that exist have small cohorts and present with different methodologies and contradictory results. Therefore, there is no consensus in the literature regarding this topic. The present study aimed to establish the contribution of the PFG in the occurrence of different subtypes of proximal femur fractures (PFF): intertrochanteric, neck and subtrochanteric. Analysis of 1022 plain anteroposterior pelvic radiographs of patients consecutively admitted to the emergency room of a Level 1 Trauma Centre between 2013 and 2019 after low energy trauma who presented with PFF and underwent surgical treatment. Patients were analysed considering age, gender and subtype of PFF (intertrochanteric, neck or subtrochanteric). Radiological parameters including cervicodiaphyseal angle (CDA), horizontal offset (HO), femoral neck width (FNW), femoral neck length (FNL), great trochanter-pubic symphysis distance (GTPSD), acetabular teardrop distance (ATD) and width of the intertrochanteric region (WIR) were measured and compared between the different subtypes of fractures (7154 measurements). Statistical analysis was conducted recurring to absolute measurements and measurements ratios. The correlation was assessed using t-test. There were statistically significant differences in proximal femur geometry between the different subtypes of fractures. Patients presenting with femoral neck fractures had greater CDA (132.5 ± 6.9 vs. 130.0 ± 7.3; p < 0.001) and lower HO (45.8 ± 7.4 vs. 49.0 ± 8.0; p < 0.001), HO/ATD (0.34 ± 0.068 vs. 0.37 ± 0.072; p < 0.001) and HO/GTPSD (0.26 ± 0.049 vs. 0.28 ± 0.039; p < 0.001) than patients with intertrochanteric/subtrochanteric fractures. PFG represents an important contributor to the occurrence of different fracture subtypes. Femoral neck fractures are associated with greater CDA and lower HO, HO/ATD and HO/GTPSD when compared to intertrochanteric or subtrochanteric fractures.