Aggregation-induced Emission Characteristics Research Articles

Natural AIEgens as Ultraviolet Sunscreens and Photosynergists for Solar Fuel Production.

Bio-nano hybrids (BNH), combining semiconductors and microorganisms, have shown great promise for effective solar-to-fuel energy conversion. However, the high-energy ultraviolet (UV) photons in the solar spectrum can cause severe photocorrosion of semiconductors and irreversible photodamage to microorganisms within BNH. Here, we developed an encapsulation strategy using natural luminogens with aggregation-induced emission characteristics (AIEgens) to construct a protective layer for BNH, effectively shielding them against high-energy UV photons. We incorporated natural berberine (BBR) into the BNH composed of Methanosarcina barkeri and polymeric carbon nitrides (CNx). The self-assembled BNH-BBR system displayed a 2.75-fold higher CH4 yield than BNH under simulated solar irradiation. Mechanism analysis revealed that BBR acted as a UV sunscreen for BNH by converting high-energy short wavelengths into low-energy long wavelengths, thereby reducing the accumulation of reactive oxygen species and alleviating the photocorrosion of CNx. Furthermore, BBR functioned as a photosynergist for BNH by regulating photoelectron production and utilization, enhancing the intracellular energy formation in M. barkeri for growth and metabolism. This work provides important insights into the effective and scalable conversion of CO2 into valuable biofuels with BNH under light illumination containing high-energy photons.

Helical Star-Shaped Bottlebrush Polymers: From Controlled Synthesis to Tunable Photoluminescence and Circularly Polarized Luminescence.

The controlled synthesis of star-shaped bottlebrush polymers with tunable topologies is a challenge. However, such materials may exhibit distinct photoluminescence properties. Bottlebrush polymers have polymerization-induced emission (PIE) properties due to their aggregated side chains, and aggregation-induced emission (AIE) is also a unique luminescent property. In this work, we prepared a variety of highly active alkyne Pd catalysts and polymerized poly(L/D-lactic acid) macromonomers containing polymerizable phenylisocyanide groups as end groups to obtain a variety of topologically structured bottlebrush polymers with controllable molecular weights and narrow molecular weight distributions. Bottlebrush polymers with tetraphenyl ethylene (TPE) units as the core exhibit tunable photoluminescence and circularly polarized luminescence properties. We propose that such properties are due to the unique AIE characteristics of the TPE unit combined with the PIE characteristics of the bottlebrush polymer.

A dual-response fluorescent hemicyanine probe for the detection of mitochondrial hypochlorite and viscosity based on ESIPT/AIE and TICT

Viscosity and hypochlorite (ClO−) are two important factors affecting the physiological activity and function of mitochondria. Hypochlorite (ClO−) is a vital reactive oxygen species, and endogenous ClO− acts as an important germicidal oxidant in the immune system at low concentrations. While, fluctuations in viscosity can cause mitochondrial dysfunction that is linked to several diseases. We herein report on a hemicyanine-based probe (BDTB-PA) for the detection of hypochlorite (ClO−) and viscosity. The probe exhibits a very low fluorescence background in an aqueous solution due to twisted intramolecular charge transfer (TICT) and blocked excited-state intramolecular proton transfer (ESIPT). In a viscous solution, the TICT of the probe was inhibited, generating a strong emission at 580 nm. In contrast, upon treatment with ClO−, the phenylboronic acid pinacol ester group of probe BDTB-PA was removed, and the hydroxyl group was released, activating the ESIPT process. Coupled with its aggregation-induced emission (AIE) characteristics, the product of BDTB-PA with ClO− exhibited a distinct emission at 540 nm. As such a solution of the probe BDTB-PA exhibited a distinct fluorescent color change from colourless to green under UV light with the addition of ClO−. More importantly, probe BDTB-PA was used for monitoring ClO− and viscosity in the mitochondria of living cells, plants and zebrafish.

Water-Soluble AIE Photosensitizer in Short-Wave Infrared Region for Albumin-Enhanced and Self-Reporting Phototheranostics

Organic photosensitizers (PSs) play important roles in phototheranostics, and contribute to the fast development of precision medicine. However, water-soluble and highly emissive organic PSs, especially those emitting in the short-wave infrared region (SWIR), are still challenging. Also, it's difficult to prepare self-reporting PSs for visualizing the treatment via stimulated emission depletion (STED) nanoscopy. Thus, in this work, a water-soluble molecule of DTPAP-TBZ-I with aggregation-induced emission features is designed for the self-reporting photodynamic therapy (PDT) in an ultra-high resolution. In contrast to single molecule, its complex (DTPAP-TBZ-I@BSA) shows much enhanced fluorescence properties and reactive oxygen species (ROS) generation in SWIR window. Their photoluminescence quantum yield is determined to be ∼20.6 % and the enhancement of ROS generation is ∼18-fold. During the PDT, immigration of the complex from cytoplasm to nucleus is also observed via STED nanoscopy with a resolution of 66.11 nm, which allows self-report in the PDT treatment. DTPAP-TBZ-I@BSA is finally utilized for the imaging-guided PDT in vivo with a tumor inhibition rate of 84 %. This is the first work in albumin-enhanced water-soluble organic PSs in SWIR window for self-reporting phototheranostics at ultra-high resolutions, providing an ideal solution for the next generation of photosensitizers for precise medicine.

Recent advances of lipid droplet-targeted AIE-active materials for imaging, diagnosis and therapy

Lipid droplets (LDs) are cellular organelles specialized in the storage and regulated release of lipids critical for energy metabolism. As investigation on LDs deepens, the complex biological functions of LDs are revealed and their relationship with various diseases such as atherosclerosis, fatty liver, obesity, and cancer is uncovered. Fluorescence-based techniques with simple operations, visible results and high non-invasiveness are ideal tools for investigating LD-related biological processes and diseases. Materials with aggregation-induced emission (AIE) characteristics have emerged as promising candidates for investigating LDs due to their high signal-to-noise ratio (S/N), strong photostability, and large Stokes shift. This review comprehensively discusses the principles and advantages of LD-targeting AIE probes for imaging LDs, diagnosis of LD-associated diseases including atherosclerotic plaques, liver diseases, acute kidney diseases and cancer, therapies with LD-targeting AIE-active photosensitizers and other relevant fields in the past five years. Through typical examples, we illustrate the status of investigating LD-related imaging, diagnosis of diseases and therapy with AIE materials. This review is expected to attract attention from scientists with different research backgrounds and contribute to the further development of LD-targeting AIE materials.

Design of aggregation-induced emission materials for biosensing of molecules and cells

In recent years, aggregation-induced emission (AIE) materials have gained significant attention and have been developed for various applications in different fields including biomedical research, chemical analysis, optoelectronic devices, materials science, and nanotechnology. AIE is a unique luminescence phenomenon, and AIEgens are fluorescent moieties with relatively twisted structures that can overcome the aggregation-caused quenching (ACQ) effect. Additionally, AIEgens offer advantages such as non-washing properties, deep tissue penetration, minimal damage to biological structures, high signal-to-noise ratio, and excellent photostability. Fluorescent probes with AIE characteristics exhibit high sensitivity, short response time, simple operation, real-time detection capability, high selectivity, and excellent biocompatibility. As a result, they have been widely applied in cellular imaging, luminescent sensing, detection of physiological abnormalities in the human body, as well as early diagnosis and treatment of diseases. This review provides a comprehensive summary and discussion of the progress over the past four years regarding the detection of metal ions, small chemical molecules, biomacromolecules, microbes, and cells based on AIE materials, along with discussing their potential applications and future development prospects.

Multi-Functional AIE Phototheranostic Agent Enhancing αPD-L1 Response for Oral Squamous Cell Carcinoma Immunotherapy.

Oral squamous cell carcinoma (OSCC) represents a prevalent head and neck malignancy with surgical intervention as the primary clinical option. Immunotherapy, particularly immune checkpoint blockade (ICB) targeting PD-1/PD-L1 shows great promise but is impeded by the immunosuppressive tumor microenvironment and low PD-L1 expression in OSCC. Herein, the "all-in-one" phototherapeutic nanoparticles (TSD NPs) are reported with balanced reactive oxygen species and photothermal conversion capacity for combined photoimmunotherapy and ICB immunotherapy against OSCC. A novel electron acceptor, 3-(dicyanomethylene)-2,3-dihydrobenzothiophene-1,1-dioxide (DTM), is introduced to develop the phototherapeutic agent with aggregation-induced emission (AIE) feature and NIR-II fluorescence centered at 1000nm. Benefiting from the AIE feature and the DTM acceptor, the resultant TSD NPs also exhibit strong type I reactive oxygen species (ROS) generation and high photothermal conversion efficiency (45.3%), which can profoundly induce immunogenic cell death (ICD), activate cytotoxic T lymphocytes, and convert the immunosuppressive tumor microenvironment into an immune-supportive one. Additionally, TSD NPs upregulate the PD-L1 expression on OSCC cells, thus enhancing the efficacy of combined treatment with αPD-L1 ICB immunotherapy. This results show that the synergistic treatment of TSD NPs and αPD-L1 effectively eradicates solid OSCC tumors without adverse effects on normal tissues, proving a novel and promising strategy for OSCC management.

Mitochondria-Targeting AIEgens as Pyroptosis Inducers for Boosting Type-I Photodynamic Therapy of Tongue Squamous Cell Carcinoma.

The development of a photosensitizer (PS) that induces pyroptosis could be a star for photodynamic therapy (PDT), particularly with type-I PSs that produce reactive oxygen species (ROS) in a hypoxic tumor microenvironment. Since pyroptosis is a recently characterized cell death pathway, it holds promise for advancing PDT in oncology, with PSs playing a critical role. Herein, we develop a PS named Th-M with aggregation-induced emission (AIE) characteristics for type-I PDT against tongue squamous cell carcinoma (TSCC). Th-M stands out for its exceptional mitochondrial-targeting ability, which triggers mitochondrial dysfunction and leads to Caspase-3 and Gasdermin E (GSDME) cleavage under white light irradiation, inducing pyroptosis in TSCC cells. Our studies verify the effectiveness of Th-M in destroying cancer cells in vitro and suppressing tumor growth in vivo while also demonstrating a favorable biosafety profile. This work pioneers the application of Th-M as a mitochondria-targeted, type-I PS that leverages the mechanism of pyroptosis, offering a potent approach for the treatment of TSSC with promising implications for future PDT of cancers.

A cell membrane-targeted photosensitizer for cancer photodynamic therapy and dynamic ablation process tracking

Photodynamic therapy (PDT) uses photosensitizer (PS) to generate reactive oxygen species (ROS) under light to trigger cell apoptosis in cancer treatment. Organelle-targeted PS can effectively enhance the efficacy of phototherapy by specifically destroying subcellular organelles. The cell membrane, as an important organelle, is the “protective wall” of cells maintaining the integrity and normal life activities of cells. The damage to cell membranes is fatal to cells. However, utilizing functional PS to achieve cell membrane-targeted PDT, and realize real-time and accurate in situ reporting of cell membrane damage and monitoring of the treatment process, are challenging tasks. In this work, we prepared a photosensitizer (2TPAO) with aggregation-induced emission (AIE) characteristics, good water solubility, strong near-infrared fluorescence, and the capability for specific imaging of cell membranes. Moreover, 2TPAO could effectively produce ROS under visible light irradiation and achieve photodynamic ablation of tumor cells and tumors. Meanwhile, during PDT, the fluorescence changes of 2TPAO indicated the destruction of cell membranes, allowing intuitive determination of the phototherapy results. Therefore, 2TPAO is an effective cell membrane-targeted PS for cancer PDT.

Expanding Our Horizons: AIE Materials in Bacterial Research.

Bacteria share a longstanding and complex relationship with humans, playing a role in protecting gut health and sustaining the ecosystem to cause infectious diseases and antibiotic resistance. Luminogenic materials that share aggregation-induced emission (AIE) characteristics have emerged as a versatile toolbox for bacterial studies through fluorescence visualization. Numerous research efforts highlight the superiority of AIE materials in this field. Recent advances in AIE materials in bacterial studies are categorized into four areas: understanding bacterial interactions, antibacterial strategies, diverse applications, and synergistic applications with bacteria. Initial research focuses on visualizing the unseen bacteria and progresses into developing strategies involving electrostatic interactions, amphiphilic AIE luminogens (AIEgens), and various AIE materials to enhance bacterial affinity. Recent progress in antibacterial strategies includes using photodynamic and photothermal therapies, bacterial toxicity studies, and combined therapies. Diverse applications from environmental disinfection to disease treatment, utilizing AIE materials in antibacterial coatings, bacterial sensors, wound healing materials, etc., are also provided. Finally, synergistic applications combining AIE materials with bacteria to achieve enhanced outcomes are explored. This review summarizes the developmental trend of AIE materials in bacterial studies and is expected to provide future research directions in advancing bacterial methodologies.

Study on mechanofluorochromism, ink-free writing, and latent fingerprint imaging of the functionalized difluoroboron compounds with methyl and methoxy

Two difluoroboron compounds including amide linkage moiety, compound F-1 with methoxy group and compound F-2 with methyl group, were designed and successfully synthesized. The results indicated that the solid powders of two compounds both displayed mechanofluorochromism phenomena, which originated from phase transformation between the well-ordered microcrystalline and amorphous states, and the intramolecular charge transfer, as well as the mechanofluorochromism of compound F-1 was better than that of compound F-2 due to larger dipole moment change value between the ground and excited states. Additionally, compound F-1 had more twisted molecular spatial conformation, which exhibited aggregation-induced emission in mixtures of THF/water, yet compound F-2 was observed aggregation-caused quenching phenomenon. It was gratified that two compounds had the potential application in the field of ink-free writing owing to their reversibly mechanofluorochromism behaviors, not only that, compound F-1 could be used to latent fingerprint imaging because of its aggregation-induced emission feature.

Assembly of protein-directed fluorescent gold nanoclusters for high-sensitivity detection of uranyl ions

Uranium is a key element in the nuclear industry, whose accidental release causes health and environmental problems. In this paper, a protein-directed fluorescent sensor with aggregation-induced emission characteristics (gold nanoclusters@ovalbumin, AuNCs@OVA) was synthesized for the detection of UO22+ with high sensitivity and selectivity. The sensor exhibited good fluorescence stability, and its fluorescence intensity could be selectively enhanced by UO22+. Based on FT-IR and XPS analyses, the increase in fluorescence intensity of AuNCs@OVA after the addition of UO22+ was attributed to aggregation induced by the complexation between UO22+ and the amino, carboxyl, hydroxyl, and phosphate groups of ovalbumin. The detection limit was determined to be 34.4 nM, and the sensor showed excellent ion selectivity for UO22+. In combination with a smartphone program, the sensor could realize the real-time detection of UO22+ in a quantitative and portable way.

Aggregation-Induced Emission Photosensitizer Boosting Algal Growth and Lipid Accumulation.

Mass production of microalgae is a research focus owing to their promising aspects for sustainable food, biofunctional compounds, nutraceuticals, and biofuel feedstock. This study uses a novel approach to enhance microalgae-derived biomass and metabolites by using an aggregation-induced emission (AIE) photosensitizer (PS), CN-TPAQ-PF6 ([C32H23N4]+). The unique AIE features of CN-TPAQ-PF6 facilitate nano-aggregation in aquatic media for an effective light spectral shift for photosynthetic augmentation in a green microalga, Chlamydomonas reinhardtii. The high reactive oxygen species (ROS) production capacity and redox-based cellular modulations reveal its potential to upsurge algal growth and lipid biosynthesis and fabricate fatty acid profiles in the metabolic pathways. Algal cells are labeled with other AIE-based nanoprobes, which are suitable as an in vivo visualization toolkit with superior fluorescence. Furthermore, cytotoxicity analysis of CN-TPAQ-PF6 on the HaCat cell line confirms that this AIE PS is biocompatible without adverse impact on living cells. The results demonstrate the property of AIE PS for the first time in enhancing algal growth and lipid accumulation simultaneously.

Exploring Cyclopentannulation as an Effective Synthetic Tool to Design Polycyclic Aromatic Hydrocarbon AIEgens for Bioimaging.

Synthesis of various polycyclic aromatic hydrocarbons (PAHs) from a palladium-catalyzed [3 + 2] cyclocondensation reaction is reported herein. The design strategy consisted of reacting the sterically hindered 1,2-bis(3,5-ditert-butylphenyl)acetylene 2 with myriad brominated anthracene and pyrene surrogates, resulting in the formation of target molecules MCP1-2 and DCP1-3, which exhibited excellent solubility in commonly used organic solvents and unveiled prominent aggregation-induced emission (AIE) characteristics in tetrahydrofuran and water solvent mixtures. Calculations using density functional theory (DFT) were utilized to validate both the contorted structures of the target molecules and their electronic conjugation featuring HOMO-LUMO band gaps (ΔE) in the range of ∼2.88 to 2.97 eV for the monocylopentannulated PAHs MCP1-2, and between ∼2.23 to 2.41 eV for the dicyclopentannulated PAHs DCP1-3. Furthermore, the biomedical features of DCP2 were investigated in cell-imaging experiments employing the RAW 264.7 macrophage cell line as a model system showing a high biocompatibility for DCP2, thus paving the way for its potential application in bioimaging. These findings underscore the significance of the target compounds as prominent AIEgens with exceptional photophysical properties and biocompatibility, therefore promoting them as valuable tools for bioimaging applications.

A long-wavelength fluorescent probe based on carbazole with AIE characteristics for the detection of ONOO− and its application

Peroxynitrite (ONOO−) is an important reactive oxygen species, and excess ONOO− in the body can lead to a range of diseases. Addressing the need for sensitive detection ONOO−, in this work, a highly sensitivity and selectivity long-wavelength fluorescent probe (named CIS) was designed for tracking ONOO− in biological cells. Probe CIS featured carbazole as the fluorophore and the CC double bond with two electron withdrawing –CN groups as the recognition site. The probe CIS exhibited the typical aggregation-induced emission (AIE) and intramolecular charge transfer (ICT) characteristics with the bright red fluorescent emission in high water fraction (fw ≥ 50 %) and negligible emission in low water fraction. The fluorescence emission wavelength of probe CIS is 631 nm, with a large Stokes shift (151 nm), which can sensitively detect ONOO− in DMSO: H2O (7:3, v/v) environment. Notably, the probe CIS exhibited a wide pH detection range (pH = 3–10), a low detection limit of 36.66 nM, high selectivity and minimal interference. Furthermore, probe CIS demonstrated excellent biocompatibility and low cytotoxicity, and can be used for the detection of exogenous ONOO− in 4T1 cells (Mouse breast cancer cells). These research results indicate that probe CIS has potential application prospects in the biological aspects.

Application of novel AIE materials in fluorescence probes

Fluorescence bioimaging is considered an indispensable technique in biological research due to its high sensitivity, excellent spatial and temporal resolution, non-invasiveness, rapid and real-time responsiveness, as well as its ease of accessibility. Among these, fluorescence probes play a pivotal role in fluorescence imaging technology thanks to their strong specificity, high sensitivity, rapid response, and straightforward implementation. Aggregation-Induced Emission (AIE) molecules exhibit a unique phenomenon: they emit weak or no fluorescence when dissolved in a solution but become highly luminescent under aggregated/clustering conditions. Leveraging this, fluorescent probes with AIE characteristics often demonstrate fluorescence activation under conditions of spontaneous aggregation or binding with analytes, showcasing high sensitivity and exceptional signal-to-noise ratios. Consequently, fluorescence probes based on the distinctive optical properties of AIE hold immense potential for applications in fluorescence bioimaging. This paper primarily investigates the synthesis properties and applications in biosensing of a series of novel organic fluorescence probes with aggregation-induced emission (AIE) characteristics. By synthesizing a range of compounds with AIE properties and experimentally determining their photophysical properties and molecular structures, the study explores the potential applications of these compounds in DNA recognition, protein detection, small molecule recognition, cellular pH detection, and bioimaging.

Amplifying Radiotherapy by Evoking Mitochondrial Oxidative Stress Using a High-performance Aggregation-induced Emission Sonosensitizer.

Developing effective methods to enhance tumor radiosensitivity is crucial for improving the therapeutic efficacy of radiotherapy (RT). Due to its deep tissue penetration, excellent safety profile, and precise controllability, sonosensitizer- based sonodynamic therapy (SDT) has recently garnered significant attention as a promising combined approach with RT. However, the limited reactive oxygen species (ROS) generation ability in the aggregated state and the absence of specific organelle targeting in sonosensitizers hinder their potential to augment RT. This study introduces a fundamental principle guiding the design of high-performance sonosensitizers employed in the aggregated state. Building upon these principles, we develop a mitochondria-targeted sonosensitizer molecule (TCSVP) with aggregation-induced emission (AIE) characteristics by organic synthesis. Then, we demonstrate the abilities of TCSVP to target mitochondria and produce ROS under ultrasound in H460 cancer cells using confocal laser scanning microscopy (CLSM) and fluorescence microscopy. Subsequently, we examine the effectiveness of enhancing tumor radiosensitivity by utilizing TCSVP and ultrasound in both H460 cells and H460 and 4T1 tumor-bearing mice. The results indicate that evoking non-lethal mitochondrial oxidative stress in tumors by TCSVP under ultrasound stimulation can significantly improve tumor radiosensitivity (p <0.05). Additionally, the in vivo safety profile of TCSVP is thoroughly confirmed by histopathological analysis. This work proposes strategies for designing efficient sonosensitizers and underscores that evoking non-lethal mitochondrial oxidative stress is an effective method to enhance tumor radiosensitivity.

Deep Blue Emitter with a Combination of Hybridized Local and Charge Transfer Excited State and Aggregation-Induced Emission Features for Efficient Non-Doped OLED.

Herein, a deep blue emitter (PI-TPB-CN) with a synergistic effect of hybridized local and charge transfer excited state (HLCT) and aggregation-induced emission (AIE) properties is successfully designed and synthesized to improve the performance of deep blue organic light-emitting diodes (OLEDs). It is constructed using a 1,2,4,5-tetraphenylbenzene (TPB) as an π-conjugated AIE core being asymmetrically functionalized with a phenanthro[9,10-d]imidazole (PI) as a weak donor (D) and a benzonitrile (CN) as an acceptor (A), thereby formulating D-π-A type fluorophore. Its HLCT and AIE properties verified by theoretical calculations, solvatochromic effects, and transient photoluminescence decay experiments, bring about a strong blue emission (452 nm) with a high photoluminescence quantum yield of 74 % in the thin film. PI-TPB-CN is successfully employed as a blue emitter in OLEDs. Non-doped OLED with the structure of ITO/HAT-CN (6 nm)/NPB (30 nm)/TCTA (10 nm)/PI-TPB-CN (30 nm)/TPBi (40 nm)/LiF (1 nm)/Al (100 nm) demonstrates excellent electroluminescence (EL) performance with blue emission (451 nm) and maximum external quantum efficiency (EQEmax) of 7.38 %. The device with a thinner layer of PI-TPB-CN (20 nm) and TPBi (30 nm) exhibits a deeper blue emission (444 nm) with CIE coordinates of (0.156, 0.096), a low turn-on voltage of 3.0 V, and EQEmax of 6.45 %.

Tumor targeting pH-triggered fluorescence-switchable hyaluronic acid-based micelles with aggregation-induced emission activity for tracing drug release and intelligent drug delivery

In this study, an amphiphilic polymer (Bio-HA(TPE-CN)-mPEG) was designed and synthesized, which was fabricated by introducing hydrophobic aggregation-induced emission (AIE) fluorophore, acid-labile imine bond, methoxy poly (ethylene glycol) (mPEG) and tumor targeting ligand biotin to the backbone of hyaluronic acid. The polymer could self-assemble into micelles and solubilize hydrophobic anticancer drugs. In vitro drug release study indicated that the micelles could disassemble rapidly under acidic environment. The involvement of biotin and HA could enhance the cellular uptake of micelles by tumor cells. Modification of micelles by mPEG could minimize non-specific protein adsorption. Fluorescence studies indicated that the micelles exhibited excellent AIE features and emitted intense long-wavelength fluorescence. More excitingly, the micelles were red emissive in the normal physiological environment, but switched to blue fluorescence in the acidic tumor environment, which could be further applied for real-time monitoring and quantification of the drug release. The in vivo antitumor efficacy study demonstrated the superior antitumor activity of the PTX-loaded micelles. The Bio-HA(TPE-CN)-mPEG micelles were promising drug carriers for chemotherapy and bioimaging.

Efficient Near-Infrared Fluorophores Based on Cyanostyrene Derivatives for Two-Photon Fluorescence Bioimaging.

Organic fluorescent materials with red/near-infrared (NIR) emission are highly promising for use in biotechnology due to their exceptional advantages. However, traditional red/NIR fluorophores often exhibit weak emission at high concentrations or in an aggregated state due to the aggregate-caused quenching effect, which severely limits their applicability in biological imaging. To address this challenge, we developed a series of cyanostyrene derivatives with aggregation-induced emission characteristics, including 2,3-Bis-(4-styryl-phenyl)-but-2-enedinitrile (DPB), 2,3-Bis-{4-[2-(4-methoxy- phenyl)-vinyl]-phenyl}-but-2-enedinitrile (DOB), 2,3-Bis-{4-[2-(4-diphenylamino- phenyl)-vinyl]-phenyl}-but-2-enedinitrile (DTB), and 2,3-Bis-[4-(2-{4-[phenyl- (4-triphenylvinyl-phenyl)-amino]-phenyl}-vinyl)- phenyl]-but-2-enedinitrile (DTTB). Notably, these compounds exhibited intense solid state fluorescence owing to AIE effect, especially DTTB shows NIR emission with high solid state quantum efficiency (712 nm, ΦF=14.2 %). Then we prepared DTTB@PS-PEG NPs nanoparticles by encapsulating DTTB with the amphiphilic polymer polystyrene-polyethylene glycol (PS-PEG). Importantly, DTTB@PS-PEG NPs exhibited highly efficient NIR luminescence (ΦF=28.7 %) and a large two-photon absorption cross-section (1900 GM) under 800 nm laser excitation. The bright two-photon fluorescence of DTTB@PS-PEG indicated that it can be a highly promising candidate for two-photon fluorescence probe. Therefore, this work provides valuable insights for the design of highly efficient and NIR-emitting two-photon fluorescent probes.