Wurtzite AlN is a piezoelectric material with excellent electro-acoustic properties and is used for the fabrication of high frequency thin film micro-acoustic components, most notably filters, duplexers, resonators, etc. Its moderate electromechanical coupling coefficient (kt2) of 6%–7% is insufficient for applications requiring larger bandwidths. Recent theoretical and experimental studies indicate that AlN alloyed with Sc exhibits a substantially higher piezoelectric constant than pure AlN. This study aims at determining the main electro-acoustic parameters of Al(1-x)Sc(x)N in view of large bandwidth applications. To this end, highly c-textured Al(1-x)Sc(x)N thin films have been synthesized with relative Sc concentrations of up to 0,15. Subsequently, FBAR resonators were fabricated and characterized as a function of the Sc content. It is seen that kt2 increases linearly with the latter to a value of 12% for a Sc concentration of x=0,15, while the Q value decreases from 739 to about 348 in the same concentration range. Likewise, the TCF varies from -35,9ppm/°C to -39,8ppm/°C, while the dielectric constant increases from ε=10 to a value of 14,1 for x=0,15. Finally, the relative dielectric losses are seen to increase by approximately a factor of two.