Fast Ion Transport Research Articles

Synergistic Bimetallic Effects of BiSb Anodes Enable Long‐Stable Sodium Storage

AbstractAlloy‐type anodes are of interest for their resource‐rich and high theoretical capacity performance in sodium‐ion batteries (SIBs). However, severe volume expansion may lead to rapid capacity decay and electrode pulverization. In this work, metallic Bi with better structure stability is rationally selected as a skeleton to form a 2D BiSb alloy to alleviate the volume expansion. Interestingly, by combining in‐situ XRD and ex‐situ TEM characterizations, a reversible multi‐step alloying sodium storage mechanism of BiSb ↔ Na(Bi, Sb) ↔ Na3(Bi, Sb) in Bi0.4Sb0.6 anode is elucidated, and the partial amorphization and expanded interlayer spacing of BiSb alloy is also revealed, which greatly alleviate volume expansion thereby enhancing electrochemical stability. Furthermore, density functional theory and kinetic calculations demonstrate that Bi0.4Sb0.6 demonstrates lower Na+ adsorption energy and Na+ diffusion energy barriers, ensuring fast electron and ion transportation during sodium storage. Benefiting from the synergistic effects of binary alloy, Bi0.4Sb0.6 exhibits a high reversible capacity and cycling stability of 446 mAh g−1 at 0.1 A g−1, and 70% high capacity after 1100 cycles at 0.5 A g−1. This work provides new insights and opportunities to develop advanced precise alloy‐type anode materials for SIBs.

Constructing high performance dry-processing oxide composite electrolyte via interfacial interactions for durable solid-state lithium batteries

Composite solid electrolytes (CSEs) have considerable combination properties, which have been considered as the most promising choice for realizing advanced solid-state lithium batteries. Yet the ionic conductivity of CSEs fails to meet the practical requirements. Herein, we develop a dry-processing CSEs based on Li1.5Al0.5Ge1.5(PO4)3 (LAGP) and succinonitrile (SN) through polytetrafluoroethylene fibrillation. On the one hand, SN can enable fast ion transport in ceramic network and serve as high-speed conducive path. On the other hand, the strong affinities of LAGP towards SN and anions can significantly improve the conductive behavior and restrict side reactions at electrolyte/Li interface. Under such regulations, the composite electrolyte exhibits high ionic conductivity (0.64 mS cm−1 at 30 °C), high transference number (0.50), and high oxidation potential (>5.0V vs. Li+/Li). The assembled lithium metal batteries demonstrate excellent stability over 300 cycles at 1.0C. This work demonstrates the ion migration mechanism and the interactions at the heterogeneous interface for SN enhanced CSEs, contributing to the development of durable solid lithium metal batteries with extended lifespan.

KOH Activated Walnut Shell Biochar Electrode of Capacitive Deionization and Its Desalination Performance

Abstract The flake biochar electrode materials with fast ion transport function were prepared by KOH activation walnut shell used as raw material. The effects of carbonization temperature and KOH-to-biochar ratio were systematically evaluated using physicochemical characterization and electrochemical performance testing. The optimized walnut shell biochar (WSC800-2), produced at 800℃ with a KOH-to-biochar ration of 2∶1, exhibited an exceptional specific surface area (2,287 m2 g-1), the highest porosity (0.824 cm3 g-1), and an excellent specific capacitance (369.51 F g-1, 10 mV s-1). Furthermore, in desalination experiments, WSC800-2 achieved a high salt adsorption capacity of 15.70 mg g-1 at 1.2V, 500 mg L-1 NaCl solution. The electrode also exhibited outstanding cycling stability, retaining 97.0% of its performance after 10 adsorption/desorption cycles. These findings highlight the potential of walnut shell-derived biochar as an effective material for capacitive deionization and future desalination technologies.

Conjugated Coordination Nanosheets with Molecular Rotors for Pseudocapacitors: Nanoarchitectonics and Enhanced Performance.

High-level pseudocapacitive materials require incorporations of significant redox regions into conductive and penetrable skeletons to enable the creation of devices capable of delivering high power for extended periods. Coordination nanosheets (CNs) are appealing materials for their high natural electrical conductivities, huge explicit surface regions, and semi-one-layered adjusted pore clusters. Thus, rational design of ligands and topological networks with desired electronic structure is required for the advancement in this field. Herein, we report three novel conjugated CNs (RV-10-M, M=Zn, Ni, and Co), by utilizing the full conjugation of the terpyridine-attached flexible tetraphenylethylene (TPE) units as the molecular rotors at the center. We prepare binder-free transparent nanosheets supported on Ni-foam with outstanding pseudocapacitive properties via a hydrothermal route followed by facile exfoliation. Among three CNs, the high surface area of RV-10-Co facilitates fast transport of ions and electrons and could achieve a high specific capacity of 670.8 C/g (1677 F/g) at 1 A/g current density. Besides, the corresponding flexible RV-10-Co possesses a maximum energy density of 37.26 Wh kg-1 at a power density of 171 W kg-1 and 70 % capacitance retention even after 1000 cycles.

Statistical Survey of Interchange Events in the Jovian Magnetosphere Using Juno Observations

AbstractInterchange instability is known to drive fast radial transport of electrons and ions in Jupiter's inner and middle magnetosphere. In this study, we conduct a statistical survey to evaluate the properties of energetic particles and plasma waves during interchange events using Juno data from 2016 to 2023. We present representative examples of interchange events followed by a statistical analysis of the spatial distribution, duration and spatial extent. Our survey indicates that interchange instability is predominant at M‐shells from 6 to 26, peaking near 17 with an average duration of minutes and a corresponding M‐shell width of <∼0.05. During interchange events, the associated plasma waves, such as whistler‐mode, Z‐mode, and electron cyclotron harmonic waves exhibit a distinct preferential location. These findings provide valuable insights into particle transport and the source region of plasma waves in the Jovian magnetosphere, as well as in other magnetized planets within and beyond our solar system.

Phase change-mediated core-sheath 3D printing of hollow microlattice pseudocapacitive aerogel electrode with favorable electrochemical properties

Channel-interconnected regulation within 3D-printed pseudocapacitive electrode architecture to generate high active material loading/utilization and fast ion transport is pivotal but challenging for implementing high-performance pseudocapacitance system. Herein, we demonstrated an innovative phase change-mediated core-sheath direct ink writing (DIW) 3D printing strategy for controllably constructing pseudocapacitive hollow-microlattice graphene/NiCo2O4 aerogel (HGNA) electrode, with regular hollow channels in printed filaments and abundant well-interconnected hierarchical pores built by jointing tortuous pseudocapacitive graphene nanosheets. The unique architectural features facilitated highly efficient diffusion and infiltration of substance throughout the entire thick filaments from both “interior-exterior” and “exterior-interior” directions, thereby enabling high-level yet effective loading of active materials as well as unimpeded ion transport across the printed bulk-structured electrode. Kinetics analysis revealed that the capacitance of pseudocapacitive HGNA electrode was primarily contributed from fast kinetic process. An asymmetric device assembled with DIW-printed HGNA electrode boasted a high energy storage performance with capacitance of 3.43 F cm−2 and energy density of 1.01 mWh cm−2, while featuring remarkable cycling stability (87% after 8000 cycles) and superior capacity even at large electrode thickness. This work opens a promising route for processing rational pseudocapacitive electrode architectures toward high-capacity, fast-kinetics devices.

Construction of VO2@V2C MXene heterostructure toward superior-rate rechargeable aqueous zinc batteries

V2C MXene delivers excellent metallic properties and robust mechanical stability. However, its low capacity, easy volume expansion during charge/discharge and relatively short cycle life limits its further development. It is an effective strategy to build Van der Waals heterostructures that can shield the monolithic materials from defects and integrate the advantages of the monolithic materials. Herein, via a one-step hydrothermal method, a VO2@V2C heterostructure is successfully constructed by the controllable oxidation of V2C, which allows for shorter ion diffusion distances, faster ion transport and enhancement of hydrophilic properties of the material. The VO2@V2C heterostructures have incredible reversibility (440.9 mAh/g at 0.2 A/g), remarkable cycling stability (142.7 mAh/g at 1.0 A/g after 900 cycles) and superior-rate capacity (255.3 mAh/g at 6.0 A/g). Density functional theory (DFT) calculations revealed that VO2@V2C possesses excellent adsorption capacity for zinc ions and outstanding electrical conductivity. The heterogeneous interface between the two materials is conducive to the increase of the embedding sites of zinc ions, which promotes the homogeneous distribution and rapid diffusion of zinc ions in the materials, and consequently enhances the capacity and cycling reliability of the electrodes. It provides a new idea for the selection of cathode electrodes for aqueous zinc ion batteries (ZIBs) in present study.

Orbit-following simulations of fast-ion transport and losses due to the Alfvén eigenmode burst in the Large Helical Device

Orbit-following simulations of fast-ion transport and losses with time-dependent electromagnetic perturbations are performed to clarify the roles of Alfvén eigenmodes (AEs) and the low-frequency magnetohydrodynamic (MHD) mode observed in the kinetic-MHD hybrid simulation of AE bursts in the Large Helical Device. Fast-ion pressure profile flattening in the kinetic-MHD hybrid simulation can be reproduced by an orbit-following simulation with only the primary single AE of the time-dependent amplitude following the kinetic-MHD hybrid simulation result, while orbit-following simulations with constant AE amplitude of average level during AE burst cannot reproduce the fast-ion pressure profile flattening observed. The effects of other modes are negligible on the fast-ion pressure profile flattening. The fast-ion losses in kinetic-MHD hybrid simulation can be reproduced by an orbit-following simulation with time-dependent amplitude when the low-frequency MHD mode is considered in addition to multiple AEs. This indicates the synergetic effect of multiple AEs and the low-frequency MHD mode on fast-ion losses.

Simultaneous Regulation of Organic and Inorganic Components in Interphase by Fiber Separator for High-Stable Sodium Metal Batteries.

Uncontrollable side reactions at the metal interface have been identified as the root cause of the formation of a fragile solid electrolyte interphase, leading to irreversible sodium loss in sodium metal batteries. Here, we proposed an interface engineering strategy that employed a carboxyl functionalized cellulose separator to provide strong dipole moments and induce the cleavage of P-F bond to construct a solid electrolyte interphase (SEI) rich in NaF. In addition, we employed nuclear magnetic resonance technology confirmed that the separator with strong dipole moments prevented the reduction of organic solvents by attracting electrons, thereby inhibiting the formation of organic oligomers. SEI with high NaF content and few oligomers is smooth and robust, obviously decreasing the interface impedance of the Na anode. The symmetric Na||Na cells, equipped with the functionalized separator, efficiently operated for 1400 hours with a stable 72 mV overpotential at 0.25 mA cm-2, exhibiting low energy barrier and fast ion transport kinetics. The Na||Na3V2(PO4)3 cell also showed stable cycling performance, with the capacity remaining at 94.83 % of the initial capacity after 1000 cycles at 1C. The proposed separator could control the formation and composition of SEI, paving the way for the development of long-life sodium metal batteries.

Attapulgite-Reinforced Cellulose Hydrogels with High Conductivity and Antifreezing Property for Flexible Sensors.

Ionic conductive cellulose hydrogels are some of the most promising candidates for flexible sensors. However, it is difficult to simultaneously prepare cellulose hydrogels with high mechanical strength, good ionic conductivity, and antifreeze performance. In this work, a natural clay (attapulgite)-reinforced cellulose hydrogel was fabricated. Through a one-pot method, cellulose and attapulgite were dispersed in a concentrated ZnCl2 solution. The obtained hydrogel exhibited a dual network of hydrogen bonds and Zn2+-induced ionic interactions. Attapulgite serves as an inorganic filler that can regulate the hydrogen-bonding density among cellulose molecules and provides abundant channels for fast ion transport. By optimizing the attapulgite loading, a mechanically strong (compressive strength up to 1.10 MPa), tough (fracture energy up to 0.36 MJ m-3), highly ionic conductive (4.15 S m-1), and freezing-tolerant hydrogel was prepared. These hydrogels can be used for sensitive and stable human motion sensing, demonstrating their great potential for healthcare applications.

Bimetal Fluorides with Adjustable Vacancy Concentration Reinforcing Ion Transport in Poly(ethylene oxide) Electrolyte.

The poor ambient ionic transport properties of poly(ethylene oxide) (PEO)-based SPEs can be greatly improved through filler introduction. Metal fluorides are effective in promoting the dissociation of lithium salts via the establishment of the Li-F bond. However, too strong Li-F interaction would impair the fast migration of lithium ions. Herein, magnesium aluminum fluoride (MAF) fillers are developed. Experimental and simulation results reveal that the Li-F bond strength could be readily altered by changing fluorine vacancy (VF) concentration in the MAF, and lithium salt anions can also be well immobilized, which realizes a balance between the dissociation degree of lithium salts and fast transport of lithium ions. Consequently, the Li symmetric cells cycle stably for more than 1400 h at 0.1 mA cm-2 with a LiF/Li3N-rich solid electrolyte interphase (SEI). The SPE exhibits a high ionic conductivity (0.5 mS cm-1) and large lithium-ion transference number (0.4), as well as high mechanical strength owing to the hydrogen bonding between MAF and PEO. The corresponding Li//LiFePO4 cells deliver a high discharge capacity of 160.1 mAh g-1 at 1 C and excellent cycling stability with 100.2 mAh g-1 retaining after 1000 cycles. The as-assembled pouch cells show excellent electrochemical stability even at rigorous conditions, demonstrating high safety and practicability.

Nanosheet-interwoven structures and ion-electron decoupling storage enable Fe1-xS fast ion transport in Li+/Na+/K+ batteries

Fe1-xS, known for its high theoretical capacity, abundant resources, and intrinsic safety, has become a focal point as a universal anode for Li+/Na+/K+ batteries. However, its fast-charging capability is unsatisfactory due to sluggish ion transport rate and low electrical conductivity. Furthermore, its Li+/Na+/K+ storage mechanisms are still unclear. Here, we fabricate a single-crystal Fe1-xS/N-doped carbon composite nanosheet interwoven structure, in which N-doped carbon layers onto surface of Fe1-xS nanosheets ameliorate the electrical conduction and the interwoven nanosheets form open pore channels that favor permeation of electrolytes to boost ion transport. In-situ magnetometry reveals that ion-electron decoupling storage and transport occur in two-phase composites of Fe/Li2S, Fe/Na2S, and Fe/K2S, in which Fe phase stores and transports electrons and sulfide phase stores and transports ions in a space-charge form, resulting in extra ion storage and fast ion transport. Consequently, the nanosheet interwoven structure delivers high capacities (1320.1/652.2/350.6 mAh g−1), outstanding fast-charging performances (679.6/295.4/106.4 mAh g−1 at 20 A g−1), and long cycling life over 5000 cycles as Li+/Na+/K+ battery anodes, respectively

Entropy‐Assisted Anion‐Reinforced Solvation Structure for Fast‐Charging Sodium‐Ion Full Batteries

AbstractAnion‐reinforced solvation structure favors the formation of inorganic‐rich robust electrode‐electrolyte interface, which endows fast ion transport and high strength modulus to enable improved electrochemical performance. However, such a unique solvation structure inevitably injures the ionic conductivity of electrolytes and limits the fast‐charging performance. Herein, a trade‐off in tuning anion‐reinforced solvation structure and high ionic conductivity is realized by the entropy‐assisted hybrid ester‐ether electrolyte. Anion‐reinforced solvation sheath with more anions occupying the inner Na+ shell is constructed by introducing the weakly coordinated ether tetrahydrofuran into the commonly used ester‐based electrolyte, which merits the accelerated desolvation energy and gradient inorganic‐rich electrode‐electrolyte interface. The improved ionic conductivity is attributed to the weakly diverse solvation structures induced by entropy effect. These enable the enhanced rate performance and cycling stability of Prussian blue||hard carbon full cells with high electrode mass loading. More importantly, the practical application of the designed electrolyte was further demonstrated by industry‐level 18650 cylindrical cells.

Entropy-Assisted Anion-Reinforced Solvation Structure for Fast-Charging Sodium-Ion Full Batteries.

Anion-reinforced solvation structure favors the formation of inorganic-rich robust electrode-electrolyte interface, which endows fast ion transport and high strength modulus to enable improved electrochemical performance. However, such a unique solvation structure inevitably injures the ionic conductivity of electrolytes and limits the fast-charging performance. Herein, a trade-off in tuning anion-reinforced solvation structure and high ionic conductivity is realized by the entropy-assisted hybrid ester-ether electrolyte. Anion-reinforced solvation sheath with more anions occupying the inner Na+ shell is constructed by introducing the weakly coordinated ether tetrahydrofuran into the commonly used ester-based electrolyte, which merits the accelerated desolvation energy and gradient inorganic-rich electrode-electrolyte interface. The improved ionic conductivity is attributed to the weakly diverse solvation structures induced by entropy effect. These enable the enhanced rate performance and cycling stability of Prussian blue||hard carbon full cells with high electrode mass loading. More importantly, the practical application of the designed electrolyte was further demonstrated by industry-level 18650 cylindrical cells.

Unlocking Fast Ionic Transport in Sub‐Nano Channels of MOF‐Based Electrolytes for Next‐Generation Batteries

AbstractIncorporating appropriate molecules into ordered porous framework materials plays a pivotal role in modulating their physicochemical properties and dynamic behaviors. Such frameworked materials are also applicable for the preparation of solid‐state electrolyte (SSE) with altered electrochemical performance. In this work, MOF (Metal‐Organic Framework)‐based frameworked electrolytes (FEs) are prepared by the introduction of conductive ion‐molecule complexes and have investigated the electrochemical behaviors. The angstrom‐level pores in the framework enable efficient interactions with the complexes and participation in ion transportation by altering the coordinating environments of Li+ ions. As a result, the activated MOF‐based SSE exhibits an impressive ionic conductivity of 4.0×10−4 S cm−1 at room temperature (RT), along with a notably reduced activation energy of 0.12 eV at 350 K. The MOF‐based FE has been applied to Li /FE /LiFePO4 batteries, which exhibit excellent long‐cycling performance with virtually no capacity loss over 1000 cycles at the current density of 2 C at RT. The novel Li+ transport mechanisms where ion‐molecules would actively participate in the interactions between the framework and Li+ ions, not only present a new strategy for enhancing the ion transport kinetics, but also deliver outstanding electrochemical performance promising for next‐generation batteries.

Pd2+-coordinated polybenzimidazole membranes with fast and selective ion transport for alkaline aqueous organic redox flow battery

The advancement of aqueous organic redox-flow batteries (AORFBs) is impeded by the lack of efficient, low-resistance, and highly selective ion-conducting membranes (ICMs). Although polybenzimidazole (PBI) is one of the most promising low-cost non-fluorinated ion-conducting membranes, it remains challenging to design stable PBI membranes with fast and selective ion transport channels. Here, we engineer the chemical structure of PBI and regulate the ion transport channels to prepare highly conductive and selective Pd2+-coordinated membranes with grafting and crosslinking structures. In this design, the positively charged quaternary ammonium groups on the side chain improve the conductivity of OH−, while the continuous cross-linked network formed by ionic bonds between quaternary ammonium groups and deprotonated imidazole groups significantly enhances the membrane's mechanical properties. Furthermore, the coordination of Pd2+ with PBI and plasticization of PBI chain by trifluoroacetate anions expand the molecular free volume while inducing local contraction. Consequently, the QPBI-xPBI-Pd membrane enables fast charge carrier transport and suppresses the diffusion of active substances. The AORFBs assembled with the QPBI-10PBI-Pd membranes exhibit high coulombic efficiency (99.6 %) and energy efficiency (77.67 %) at 100 mA cm−2, maintaining excellent stability for 500 cycles. This study provides an innovative strategy to design high-performance PBI membranes for RFBs, thereby advancing the viability of RFBs in the realm of large-scale energy storage technologies.

A Flexible Multifunctional Cyanoethyl-Modified Bacterial Cellulose Nanofiber Framework for High-Energy and High-Power Density Aqueous Li-Ion Batteries.

Aqueous rechargeable lithium-ion batteries (ARLIBs) are extensively researched due to their inherent safety, typical affordability, and potential high energy density. However, fabricating ARLIBs with both high energy density and power performance remains challenging. Herein, based on cyanoethyl-modified bacterial cellulose nanofibers (CBCNs), a multifunctional fast ion transport framework is developed to construct the flexible free-standing ARLIBs with high areal loading and excellent rate performance. Benefiting from the unique merits of CBCNs, such as ultra-high aspect ratio, excellent toughness, superior adhesion, good lithiophilicity and ideal stability, the flexible free-standing and highly robust electrodes are fabricated and exhibit a long-term stable cycling of 1200 cycles with a high specific capacity of 117 mAh∙g-1 at 15 C. Remarkably, the corresponding full cell with the free-standing high mass loading (45.5 mg∙cm-2) electrodes under the condition of ultra-low addition of battery binder demonstrates a cycle lifespan of over 1000 cycles with a specific capacity of 120 mAh∙g-1 and a capacity decay as low as 0.03% per cycle, which is far superior to those of almost all previous reports. This work provides a strategy for constructing ARLIBs with high energy density and power performance by introducing a unique fast ion transport nanofiber framework.

Highly Tough Slide‐Crosslinked Gel Polymer Electrolyte for Stable Lithium Metal Batteries

AbstractGel polymer electrolytes (GPEs) hold great promise for the practical application of lithium metal batteries. However, conventional GPEs hardly resists lithium dendrites growth and maintains long‐term cycling stability of the battery due to its poor mechanical performance. Inspired by the slide‐ring structure of polyrotaxanes (PRs), herein we developed a dynamic slide‐crosslinked gel polymer electrolyte (SCGPE) with extraordinary stretchability of 970.93 % and mechanical strength of 1.15 MPa, which is helpful to buffer the volume change of electrodes and maintain mechanical integrity of the battery structure during cycling. Notably, the PRs structures can provide fast ion transport channels to obtain high ionic conductivity of 1.73×10−3 S cm−1 at 30 °C. Additionally, the strong polar groups in SCGPE restrict the free movement of anions to achieve high lithium‐ion transference number of 0.71, which is favorable to enhance Li+ transport dynamics and induce uniform Li+ deposition. Benefiting from these features, the constructed Li|SCGPE‐3|LFP cells exhibit ultra‐long and stable cycle life over 1000 cycles and high‐capacity retention (89.6 % after 1000 cycles). Even at a high rate of 16 C, the cells deliver a high capacity of 79.2 mAh g−1. The slide‐crosslinking strategy in this work provides a new perspective on the design of advanced GPEs for LMBs.

Remarkable chemical adsorption and catalysis of 3D self-supporting Zn-doped NiCo2O4 nanowires for high-performance lithium-sulfur batteries

Lithium-sulfur batteries are one of the most potential next-generation energy storage systems with high theoretical energy density and low cost. However, the lithium polysulfides (LiPSs) dissolution and shuttle effect limit their commercial application. Herein, the Zn-doped NiCo2O4 nanowires grown on carbon cloth (ZNCOCC) are prepared by hydrothermal method and as sulfur host. ZNCO nanowires consisting of stacked nanoparticles and abundant mesopores were grown vertically on carbon fibers. The mesoporous structure of ZNCOCC provides more space to accommodate sulfur and its volume change during charging and discharging, is conducive to electrolyte infiltration and maintains strong adsorption of LiPSs to ensure fast ion transport kinetics. The ZNCOCC displays higher Co3+/Co2+ and Ni3+/Ni2+ ratio compared to NCOCC, and the high-valent metal cations can provide more unsaturated electron orbitals for S binding, causing high adsorption of LiPSs. Density functional theory calculations demonstrate that the Zn doping significantly reduces the band gap, improves the conductivity and increases the LiPSs adsorption energy of NCO. The ZNCOCC/Li2S8 displays a high specific capacity of 1184 mAh g−1 (0.1 C) and a low decay of 0.07 %/cycle after 500 cycles (2 C). This research reveals the rational design of a doped bimetal oxide nanostructure for the improvement of lithium-sulfur batteries.

Vertical-channel hierarchically porous 3D printed electrodes with ultrahigh mass loading and areal energy density for Li-ion batteries

Lithium-ion batteries (LIBs) are renowned for their high energy density, long lifespan, and minimal self-discharge, making them a prominent power supply system. However, the persistent demand for improved energy density coupled with mechanical stability remains a significant challenge, as efforts to enhance electrode thickness or achieve geometric complexity through conventional ink-casting methods have yielded limited results. To tackle this challenge, we applied a three-dimensional (3D) printing technique to swiftly construct 3D thick electrodes with ultrahigh mass loading. Combined with unidirectional ice-templating process, high mass loading electrodes with hierarchically porous structures were successfully fabricated. The mass loading of the 3D electrodes can reach up to 73.83 mg cm−2, significantly enhancing the areal capacity. The low tortuosity and good mechanical resilience of these structures enable fast ion and charge transport, leading to significant improvements in areal energy density without sacrificing the power density. The assembled full cell exhibits an impressive areal capacity of 10.34 mAh cm⁻2 at 0.2 C and an excellent energy density of 18.41 mWh cm−2, surpassing other 3D printed lithium-ion batteries. This approach marks a significant advancement in electrode structural design towards higher areal capacity and energy density, showcasing the intriguing potential of 3D printed batteries for practical applications. Additionally, it also highlights the scalability and design versatility provided by 3D printing technique.