Family Of Metal-organic Frameworks Research Articles

Two-Dimensional Conjugated Metal-Organic Frameworks with a Ring-in-Ring Topology and High Electrical Conductance.

Electrically conducting two-dimensional (2D) metal-organic frameworks (MOFs) have garnered significant interest due to their remarkable structural tunability and outstanding electrical properties. However, the design and synthesis of high-performance materials face challenges due to the limited availability of specific ligands and pore structures. In this study, we have employed a novel highly branched D3h symmetrical planar conjugated ligand, dodechydroxylhexabenzotrinaphthylene (DHHBTN) to fabricate a series of 2D conductive MOFs, named M-DHHBTN (M = Co, Ni, and Cu). This new family of MOFs offers two distinct types of pores, elevating the structural complexity of 2D conductive MOFs to a more advanced level. The intricate tessellation patterns of the M-DHHBTN are elucidated through comprehensive analyses involving powder X-ray diffraction, theoretical simulations, and high-resolution transmission electron microscope. Optical-pump terahertz-probe spectroscopic measurements unveiled carrier mobility in DHHBTN-based 2D MOFs spanning from 0.69 to 3.10 cm2 V-1 s-1. Among M-DHHBTN famility, Cu-DHHBTN displayed high electrical conductivity reaching 0.21 S cm-1 at 298 K with thermal activation behavior. This work leverages the "branched conjugation" of the ligand to encode heteroporosity into highly conductive 2D MOFs, underscoring the significant potential of heterogeneous double-pore structures for future applications.

Porphyrin Metal-organic Framework Sensors for Chemical and Biological Sensing.

Porphyrins and porphyrin derivatives have been intensively explored for a number of applications such as sensing, catalysis, adsorption, and photocatalysis due to their outstanding photophysical properties. Their usage in sensing applications, however, is limited by intrinsic defects such as physiological instability and self-quenching. To reduce self-quenching susceptibility, researchers have developed porphyrin metal-organic frameworks (MOFs). Metal-organic frameworks (MOFs), a unique type of hybrid porous coordination polymers comprised of metal ions linked by organic linkers, are gaining popularity. Porphyrin molecules can be integrated into MOFs or employed as organic linkers in the production of MOFs. Porphyrin-based MOFs are a separate branch of the huge MOF family that combines the distinguishing qualities of porphyrins (e.g., fluorescent nature) and MOFs (e.g., high surface area, high porosity) to enable sensing applications with higher sensitivity, specificity, and extended target range. The key synthesis techniques for porphyrin-based MOFs, such as porphyrin@MOFs, porphyrinic MOFs, and composite porphyrinic MOFs, are outlined in this review article. This review article focuses on current advances and breakthroughs in the field of porphyrin-based MOFs for detecting a variety of targets (for example, metal ions, anions, explosives, biomolecules, pH, and toxins). Finally, the issues and potential future uses of this class of emerging materials for sensing applications are reviewed.

Two‐Dimensional Conjugated Metal–Organic Frameworks with a Ring‐in‐Ring Topology and High Electrical Conductance

Electrically conducting two‐dimensional (2D) metal‐organic frameworks (MOFs) have garnered significant interest due to their remarkable structural tunability and outstanding electrical properties. However, the design and synthesis of high‐performance materials face challenges due to the limited availability of specific ligands and pore structures. In this study, we have employed a novel highly branched D3h symmetrical planar conjugated ligand, dodechydroxylhexabenzotrinaphthylene (DHHBTN) to fabricate a series of 2D conductive MOFs, named M‐DHHBTN (M = Co, Ni, and Cu). This new family of MOFs offers two distinct types of pores, elevating the structural complexity of 2D conductive MOFs to a more advanced level. The intricate tessellation patterns of the M‐DHHBTN are elucidated through comprehensive analyses involving powder X‐ray diffraction, theoretical simulations, and high‐resolution transmission electron microscope. Optical‐pump terahertz‐probe spectroscopic measurements unveiled carrier mobility in DHHBTN‐based 2D MOFs spanning from 0.69 to 3.10 cm2 V‐1 s‐1. Among M‐DHHBTN famility, Cu‐DHHBTN displayed high electrical conductivity reaching 0.21 S cm−1 at 298 K with thermal activation behavior. This work leverages the “branched conjugation” of the ligand to encode heteroporosity into highly conductive 2D MOFs, underscoring the significant potential of heterogeneous double‐pore structures for future applications.

Melt-quenched glass formation of a family of metal-carboxylate frameworks

Metal-organic framework (MOF) glasses are an emerging class of glasses which complement traditional inorganic, organic and metallic counterparts due to their hybrid nature. Although a few zeolitic imidazolate frameworks have been made into glasses, how to melt and quench the largest subclass of MOFs, metal carboxylate frameworks, into glasses remains challenging. Here, we develop a strategy by grafting the zwitterions on the carboxylate ligands and incorporating organic acids in the framework channels to enable the glass formation. The charge delocalization of zwitterion-acid subsystem and the densely filled channels facilitate the coordination bonding mismatch and thus reduce the melting temperature. Following melt-quenching realizes the glass formation of a family of carboxylate MOFs (UiO-67, UiO-68 and DUT-5), which are usually believed to be un-meltable. Our work opens up an avenue for melt-quenching porous molecular solids into glasses.

Bimetal-regulated indium-based metal-organic framework family realizing highly efficient photo/electrocatalytic hydrogen evolution reaction

Based on promptly emerging global necessity and future environmental considerations, highly efficient production of hydrogen as sustainable energy receives great attention. In this work, bimetal-regulated In-based metal-organic framework (MOF) family is successfully designed and obtained. The most importance is that they exhibit high electrocatalytic and photocatalytic activities towards hydrogen generation from water. Such photo/electro-catalyst for efficiently producing hydrogen is a great challenge and requirement, which is also considered as the best way for green energy production. Herein, bimetallic indium-based MOFs is named as In/M-MOFs (M = Ni, Mn, Co, Fe and In). Among of them, In/Ni-MOF as electrocatalyst achieves a stable HER current with an extremely low overpotential of 215 mV at 10 mA cm−2 in 0.1 M KOH, and it as photocatalyst presents a superior hydrogen evolution efficiency of 1478.75 μmol·h−1·g−1 under full-range irradiation. These exciting results highlight great potential of In-based MOFs via bimetal regulation and control, and provide bright prospect for the construction of dual-functional green catalysts in the field of photo/electrocatalysis.

Improving the proton conductivity of HKUST‐1 by hole expansion and ionic liquid introduction

As a new type of proton conductor, metal–organic frameworks (MOFs) have attracted much attention because of their superior properties over conventional materials, such as the modifiability of framework, reversibility of coordination bond, high specific surface area, and porosity. It is predicted that the proton conductivities of MOFs can be improved by hole expansion and ionic liquid introduction. In this work, HKUST‐1 and LP‐HKUST‐1 were prepared, which were filled with different proportions of N‐methylimidazole triflate (MIM‐CF3SO3) to prepare composite materials MIM‐CF3SO3@HKUST‐1‐100% and MIM‐CF3SO3@LP‐HKUST‐1‐x (x = 25%, 50%, 75% and 100%). A total of seven kinds of materials were synthesized. The proton conductivities of all the materials at 75% RH were tested from 303 to 353 K. In this environment, MIM‐CF3SO3@LP‐HKUST‐1‐100% shows excellent proton conductivity (σ = 0.341 S·cm−1 at 353 K, 75% relatively humidity [RH]), being 7060 times that of HKUST‐1, and reaches the peak value of MOF family in recent years. Then, the conductivities of parts of the materials were tested in extreme environments, such as in high‐humidity environment (303–353 K, 100% RH), high‐temperature environment (373–423 K, N2 atmosphere), and low‐temperature environment (253–283 K, 75% RH). The results show that under all conditions above, the proton conductivity of MIM‐CF3SO3@LP‐HKUST‐1‐100% is the best, up to 0.341 S·cm−1 at 353 K and 75% RH, 0.179 S·cm−1 at 353 K and 100% RH, 1.31 × 10−3 S·cm−1 at 283 K and 75% RH, and 2.31 × 10−4 S·cm−1 at 423 K and N2 atmosphere, indicating that proton conductivity of HKUST‐1 is improved by hole expansion and ionic liquid introduction. Finally, the stability test showed that MIM‐CF3SO3@LP‐HKUST‐1‐100% was stable in all environments above. Moreover, the conductive mechanism of HKUST‐1 before and after introduction of ionic liquids was also discussed, providing a theoretical basis for the enhancement of proton conductivities of MOFs using ionic liquid introduction and hole expansion.

In Situ Single-crystal X-ray Diffraction Studies of Physisorption and Chemisorption of SO2 within a Metal-Organic Framework and Its Competitive Adsorption with Water.

Living on an increasingly polluted planet, the removal of toxic pollutants such as sulfur dioxide (SO2) from the troposphere and power station flue gas is becoming more and more important. The CPO-27/MOF-74 family of metal-organic frameworks (MOFs) with their high densities of open metal sites is well suited for the selective adsorption of gases that, like SO2, bind well to metals and have been extensively researched both practically and through computer simulations. However, until now, focus has centered upon the binding of SO2 to the open metal sites in this MOF (called chemisorption, where the adsorbent-adsorbate interaction is through a chemical bond). The possibility of physisorption (where the adsorbent-adsorbate interaction is only through weak intermolecular forces) has not been identified experimentally. This work presents an in situ single-crystal X-ray diffraction (scXRD) study that identifies discrete adsorption sites within Ni-MOF-74/Ni-CPO-27, where SO2 is both chemisorbed and physisorbed while also probing competitive adsorption of SO2 of these sites when water is present. Further features of this site have been confirmed by variable SO2 pressure scXRD studies, DFT calculations, and IR studies.

Simultaneous adsorption of anionic and cationic species on UiO-66 and MIL-125 MOFs: Mechanisms & selectivity

Metal-organic frameworks (MOFs) have attractive properties, including regular pore structure, high specific surface area, tunable surface properties, and abundant active sites. Such properties have boosted their recent development in many fields, including water treatment. In this study, MOFs composed of tetravalent metals (Ti4+ and Zr4+) and dicarboxylate linker (terephthalate – BDC) were modified using surface functionalization and/or pore structure through defect engineering to enhance adsorption properties. It has been shown that the Ti-containing materials (MIL-125) show a greater affinity for cationic species, while the Zr-containing samples (UiO-66) have a higher affinity for anionic species. Surface charge and electrostatic interactions could account for such a difference in adsorption properties. Zeta potential measurements showed that MIL-125 has a more negative surface charge for both non-functionalized and amino-functionalized versions, which favors the interaction with cationic molecules. On the other hand, UiO-66 has a more positive surface, which facilitates interactions with anionic molecules. Within each MOF family, the non-functionalized structures emerged as the best-performing materials. Specifically, MIL-125(H) and UiO-66(H)_5eq, with 5eq denoting the amount of H2O added during synthesis, showed superior performance. Furthermore, by performing simultaneous adsorption experiments with anionic and cationic contaminants, it was found that the adsorption of the anionic dye acid orange 7 (AO7) onto the UiO-66 framework is primarily based on specific interactions between the sulfonic group (-SO3-) within the AO7 molecule and the inorganic core Zr6O4(OH)4 of UiO-66. The interaction between MIL-125 and the cationic dye methylene blue (MB) was found to be more delocalized, based on electrostatic and π-π interactions between the benzene domains. Finally, except for MIL-125(H), all the tested MOFs showed high stability in water and in the adsorption process. The higher stability of UiO-66 over MIL-125 materials can be attributed to steric effects and lower metal electronegativity. Compared to MIL-125(H), the higher stability of MIL-125(NH2) is probably related to the formation of intramolecular hydrogen bonds.

Elucidating the redox activity of cobalt-1,2,3,4-cyclopentane-tetracarboxylic acid and 1,2,4,5-benzene-tetracarboxylic acid-based metal-organic frameworks for a hybrid supercapacitor.

The development of electrode materials with extraordinary energy densities or high power densities has experienced a spectacular upsurge because of significant advances in energy storage technology. In recent years, the family of metal-organic frameworks (MOFs) has become an essential contender for electrode materials. Herein, two cobalt-based MOFs are synthesized with distinct linkers named 1,2,4,5-benzene-tetra-carboxylic acid (BTCA) and 1,2,3,4-cyclopentane-tetracarboxylic acid (CPTC). Investigations have been rigorously conducted to fully understand the effect of linkers on the electrochemical properties of Co-based MOFs. The best sample among the MOFs was used with activated carbon to create a battery-supercapacitor hybrid device. Due to its noteworthy results, specific capacity (100.3 C g-1), energy density (23 W h kg-1), power density (3400 W kg-1) and with the lowest ESR value of 0.4 Ω as well as its 95.4% capacity retention, the fabricated hybrid device was discovered to be very appealing for applications demanding energy storage. An approach for evaluating battery-supercapacitors was employed by quantifying the capacitive and diffusive contributions using Dunn's model to reflect the bulk and surface processes occurring during charge storage. This study fills the gap between supercapacitors and batteries, as well as providing a roadmap for creating a new generation of energy storage technologies with improved features.

Heterometallic MIL-125(Ti-Al) frameworks for electrochemical determination of ascorbic acid, dopamine and uric acid.

The detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) is not only of great significance in the areas of biomedicine and neurochemistry but also helpful in disease diagnosis and pathology research. Due to their diverse structures, designability, and large specific surface areas, metal-organic frameworks (MOFs) have recently caught considerable attention in the electrochemical field. Herein, a family of heterometallic MOFs with amino modification, MIL-125(Ti-Al)-xNH2 (x = 0%, 25%, 50%, 75%, and 100%), were synthesized and employed as electrochemical sensors for the detection of AA, DA, and UA. Among them, MIL-125(Ti-Al)-75%NH2 exhibited the most promising electrochemical behavior with 40% doping of carbon black in 0.1 M PBS (pH = 7.10), which displayed individual detection performance with wide linear detection ranges (1.0-6.5 mM for AA, 5-100 μM for DA and 5-120 μM for UA) and low limits of detection (0.215 mM for AA, 0.086 μM for DA, and 0.876 μM for UA, S/N = 3). Furthermore, the as-prepared MIL-125(Ti-Al)-75%NH2/GCE provided a promising platform for future application in real sample analysis, owing to its excellent anti-interference performance and good stability.

Magnetocaloric Properties in Rare-Earth-Based Metal-Organic Frameworks: Influence of Magnetic Density and Hydrostatic Pressure.

Magnetic refrigeration based on the magnetocaloric effect (MCE) in metal-organic frameworks (MOF) is regarded as an attractive approach to create more sustainable cooling systems with higher efficiency than traditional ones. Here, we report a study of the MCE in a series of rare-earth-based MOFs. We have considered the selection of the rare-earth cation by investigating materials belonging to the α-rare-earth polymeric framework-4 (α-RPF-4) MOF family, synthesized with different rare-earth cations, and observed that paramagnetic moment and saturation magnetization play an important role in enhancing the magnetic entropy change ΔSM. The effect of structural parameters has also been considered by investigating three classes of metal-organic Gd materials built up from different types of inorganic secondary building units, including clusters (as in Gd-UiO-66), one-dimensional (as in α-RPF-4), and layered (as in Gd-LRH) conformations. Moreover, the analysis of the hydrostatic pressure influence reveals a significant increase in the -ΔSM and relative cooling power (RCP) with values between 4.3 and 16.3 and 121-509 J/kg. Specifically, the RCPmax found was ∼683 J/kg for Gd-UiO-66, which is higher than the one recently observed for Gd2SiO5 (649.5 J/kg). The present study demonstrates that the engineering of metal-organic framework systems based on high Gd densities may favor enhancing of magnetocaloric responses even at low pressures, thus promoting a new design strategy for efficient cooling devices.

Storage and Diffusion of Carbon Dioxide in the Metal Organic Framework MOF-5─A Semi-empirical Molecular Dynamics Study.

Metal-organic frameworks (MOFs) have attracted increasing attention due to their high porosity for exceptional gas storage applications. MOF-5 belongs to the family of isoreticular MOFs (IRMOFs) and consists of Zn4O6+ clusters linked by 1,4-benzenedicarboxylate. Due to the large number of atoms in the unit cell, molecular dynamics simulation based on density functional theory has proved to be too demanding, while force field models are often inadequate to model complex host-guest interactions. To overcome this limitation, an alternative semi-empirical approach using a set of approximations and extensive parametrization of interactions called density functional tight binding (DFTB) was applied in this work to study CO2 in the MOF-5 host. Calculations of pristine MOF-5 yield very good agreement with experimental data in terms of X-ray diffraction patterns as well as mechanical properties, such as the negative thermal expansion coefficient and the bulk modulus. In addition, different loadings of CO2 were introduced, and the associated self-diffusion coefficients and activation energies were investigated. The results show very good agreement with those of other experimental and theoretical investigations. This study provides detailed insights into the capability of semi-empirical DFTB-based molecular dynamics simulations of these challenging guest@host systems. Based on the comparison of the guest-guest pair distributions observed inside the MOF host and the corresponding gas-phase reference, a liquid-like structure of CO2 can be deduced upon storage in the host material.

Assessment of synthesis conditions on the corrosion inhibitive features of ZIF-67 MOF

Metal-organic frameworks (MOFs) have indeed attracted substantial interest owing to their distinctive features and diverse applications, such as corrosion protection. In this work, using two synthesis methods, namely co-precipitation (CZ67) and solvothermal (SZ67), a cobalt-based zeolitic imidazole framework (ZIF-67) was developed as an essential family of MOFs. The results of the characterization confirmed that ZIF-67 particles were synthesized successfully. According to the results of XRD, FE-SEM, TEM, ICP-OES, TGA, and BET analysis, the SZ67 has a higher surface area and higher stability in solution compared to CZ67. In addition, CZ67 and SZ67 were introduced in epoxy coatings to form CZ67/EPC and SZ67/EPC. The SZ67/EPC exhibited greater corrosion inhibition activity than the CZ67/EPC. After 24 h of exposure to the salty media, the|Z|at the low frequency for the scratched SZ67/EPC (119,500 Ω.cm2) reached 1.1 and 5.7 times of that for the CZ67/EPC and Neat epoxy coatings, respectively. Furthermore, SZ67/EPC demonstrated superior barrier anticorrosion properties during immersion for forty days. The corrosion protection and adhesion performance of SZ67/EPC surpassed the rest of the coated samples after salt spray exposure.

Simplifying the Synthesis of Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) are porous, crystalline materials constructed from organic linkers and inorganic nodes that have attracted widespread interest due to their permanent porosity and highly modular structures. However, the large volumes of organic solvents and additives, long reaction times, and specialized equipment typically required to synthesize MOFs hinder their widespread adoption in both academia and industry. Recently, our lab has developed several user-friendly methods for the gram-scale (1-100 g) preparation of MOFs. Herein, we summarize our progress in the development of high-concentration solvothermal, mechanochemical, and ionothermal syntheses of MOFs, as well as in minimizing the amount of modulators required to prepare highly crystalline Zr-MOFs. To begin, we detail our work elucidating key features of acid modulation in Zr-MOFs to improve upon current dilute solvothermal syntheses. Choosing an optimal modulator maximizes the crystallinity and porosity of Zr-MOFs while minimizing the quantity of modulator needed, reducing the waste associated with MOF synthesis. By evaluating a range of modulators, we identify the pKa, size, and structural similarity of the modulator to the linker as controlling factors in modulating ability. In the following section, we describe two high-concentration solvothermal methods for the synthesis of Zr-MOFs and demonstrate their generality among a range of frameworks. We also target the M2(dobdc) (M = Mg, Mn, Fe, Co, Ni, Cu, Zn, Cd; dobdc4- = 2,5-dioxido-1,4-benzenedicarboxylate) family of MOFs for high-concentration synthesis and introduce a two-step preparation of several variants that proceeds through a novel kinetic phase. The high-concentration methods we discuss produce MOFs on multi-gram scale with comparable properties to those prepared under traditional dilute solvothermal conditions. Next, to further curtail solvent waste and accelerate reaction times, we discuss the mechanochemical preparation of M2(dobdc) MOFs utilizing liquid amine additives in a planetary ball mill, which we also apply to the synthesis of two related salicylate frameworks. These samples exhibit comparable porosities to traditional dilute solvothermal samples but can be synthesized in just minutes, as opposed to days, and require under 1 mL of liquid additive to prepare ~0.5 g of material. In the following section, we discuss our efforts to avoid specialized equipment and eliminate solvent use entirely by employing ionothermal conditions to prepare a variety of azolate- and salicylate-based MOFs. Simply combining metal chloride (hydrate) salts with organic linkers at temperatures above the melting points of the salts affords high-quality framework materials. Further, ionothermal conditions enable the syntheses of two new Fe(III) M2(dobdc) derivatives that cannot be synthesized under normal solvothermal conditions. Last, as a demonstrative example, we discuss our efforts to synthesize 100 g of high-quality Mg2(dobdc) in a single batch using a high-concentration (1.0 M) hydrothermal synthesis. Our Account will be of significant interest to researchers aiming to prepare gram-scale quantities of MOFs for further study.

Investigating the mechanical stability of flexible metal–organic frameworks

As we continue to develop metal–organic frameworks (MOFs) for potential industrial applications, it becomes increasingly imperative to understand their mechanical stability. Notably, amongst flexible MOFs, structure-property relationships regarding their compressibility under pressure remain unclear. In this work, we conducted in situ variable pressure powder X-ray diffraction (PXRD) measurements up to moderate pressures (<1 GPa) using a synchrotron source on two families of flexible MOFs: (i) NU-1400 and NU-1401, and (ii) MIL-88B, MIL-88B-(CH3)2, and MIL-88B-(CH3)4. In this project scope, we found a positive correlation between bulk moduli and degree of flexibility, where increased rigidity (e.g., smaller swelling or breathing amplitude) arising from steric hindrance was deleterious, and observed reversibility in the unit cell compression of these MOFs. This study serves as a primer for the community to begin to untangle the factors that engender flexible frameworks with mechanical resilience.

Unlocking the future of brain research: MOFs, TMOs, and MOFs/TMOs for electrochemical NTMs detection and analysis

The central nervous system relies heavily on neurotransmitters (NTMs), and NTM imbalances have been linked to a wide range of neurological conditions. Thus, the development of reliable detection techniques is essential for advancing brain studies. This review offers a comprehensive analysis of metal-organic frameworks (MOFs), transition metal oxides (TMOs), and MOFs-derived TMOs (MOFs/TMOs) as materials for electrochemical (EC) sensors targeting the detection of key NTMs, specifically dopamine (DA), epinephrine (EP), and serotonin (SR). The unique properties and diverse families of MOFs and TMOs, along with their nanostructured hybrids, are discussed in the context of EC sensing. The review also addresses the challenges in detecting NTMs and proposes a systematic approach to tackle these obstacles. Despite the vast amount of research on MOFs and TMOs-based EC sensors for DA detection, the review highlights the gaps in the literature for MOFs/TMOs-based EC sensors specifically for EP and SR detection, as well as the limited research on microneedles (MNs)-based EC sensors modified with MOFs, TMOs, and MOFs/TMOs for NTMs detection. This review serves as a foundation to encourage researchers to further explore the potential applications of MOFs, TMOs, and MOFs/TMOs-based EC sensors in the context of neurological disorders and other health conditions related to NTMs imbalances.

Nano-structuring metal organic frameworks on semiconductor nanowire arrays for highly sensitive and selective chemical sensing

Chemiresistive sensing of gas molecules has been widely investigated for application in medical diagnostics and environmental monitoring, showing high sensitivity and low limits of detection toward various volatile organic compounds. While metal oxide semiconductors offer numerous advantages, such as ease of fabrication, high sensitivity, and fast response times, they often suffer of high insufficient selectivity. Here, we report the engineering of a low-temperature sensing platform consisting of nanostructured zeolitic imidazolate framework (ZIF-8) metal organic frameworks (MOFs) over InP semiconducting nanowire (NW) arrays. These devices were fabricated via top-down etching of InP NW arrays, aerosol deposition of flame-made ZnO nanoparticles, and their chemical vapor conversion to ZIF-8. The presence of ZIF-8 significantly enhances the device sensitivity over that of the pristine InP NW arrays by providing a high density of adsorption sites and faster reduction kinetics. Our optimal sensors can detect NO2 in a large concentration range from 0.1 to 8 ppm, in addition to showing relatively higher responses toward various gas molecules, including CO2, methanol, ethanol, acetone, and propane, in comparison with pristine InP NW sensors. Given the large family of MOFs with controllable pore size and chemical composition, our findings provide a flexible approach for engineering the selectivity of highly sensitive and miniaturized gas sensors for integration in miniaturized devices.

Free standing organometallic dimethylammonium zinc formate perovskite for photonic and antimicrobial applications

In this study, we have focused on the synthesis and analysis of a photoactive perovskite polymer composite film consisting of dimethylammonium zinc formate perovskite (DMAZF) as a crucial member of the metal-organic frameworks family, templated by polycarbonate. The characterization of DMAZF involved a comprehensive analysis using various techniques, including UV-VIS absorption spectra, Raman spectra, Fourier-transform infrared spectra, Z Scan, thermal analysis, frequency-dependent dielectric measurements, and nuclear magnetic resonance. The results of the characterizations revealed that the DMAZF composite film exhibits excellent crystallinity, promising thermodynamic capability for water splitting, desirable dielectric properties, nonlinear effects, and a remarkable surface response to adhering microorganisms, particularly against E. coli and S. aureus. The antibacterial activity was evaluated using the well diffusion method, confirming the material's potential as an antimicrobial agent. Moreover, Z scan studies have unveiled exciting technological applications of DMAZF, further enhancing its appeal as an emerging class of nanomaterial in nanotechnology.

Engineered Ni–Fe prussian blue analogue nanocubes and their transformation into nanocages and mixed oxide for applications as bifunctional electrocatalyst

3D nanostructured Prussian blue analogues (PBA) are promising candidates in the family of metal-organic frameworks (MOFs) for applications as bifunctional electrocatalysts due to their open framework structures, high specific surface areas and variable metal active sites. Due to their facile synthesis approach and unique framework structures, these nanostructures can be easily transformed into different structures/materials having different compositions. Herein, we have synthesized Ni–Fe Prussian blue analogue nanocubes (NiFe-PBA-NC) via a simple precipitation method and converted them into Ni–Fe Prussian blue analogue nanocages (NiFe-PBA-NG) and porous mixed metal oxide (NiFe-oxide). For the conversion of nanocubes to nanocages a very controlled etching process is carried out by using an ammonia solution while for the formation of porous mixed metal oxide, nanocubes are annealed in the presence of air. The transformation of nanocubes to nanocages and mixed metal-oxide is thoroughly characterized by various spectroscopic and microscopic techniques and employed as a bifunctional electrocatalyst for oxygen evolution and oxygen reduction reactions (OER and ORR, respectively) in which NiFe-oxide proved to be the best bifunctional catalyst. This thorough and systematic study reveals the fundamentals of the structure-property co-relation towards engineering novel bifunctional electrocatalysts.

Metal-Organic Frameworks as Formose Reaction Catalysts with Enhanced Selectivity.

The formose reaction is an autocatalytic series of aldol condensations that allows one to obtain monosaccharides from formaldehyde. The formose reaction suffers from a lack of selectivity, which hinders practical applications at the industrial level. Over the years, many attempts have been made to overcome this selectivity issue, with modest results. Heterogeneous porous catalysts with acid-base properties, such as Metal-Organic Frameworks (MOFs), can offer advantages compared to homogeneous strong bases (e.g., calcium hydroxide) for increasing the selectivity of this important reaction. For the very first time, four different Zeolite Imidazolate Frameworks are presented in this work as catalysts for the formose reaction in liquid phase, and their catalytic performances were compared with those of the typical homogeneous catalyst (i.e., calcium hydroxide). The heterogeneous nature of the catalysis, the possible contribution of leached metal or linkers to the solution, and the stability of the materials were investigated. The porous structure of these solids and their mild basicity make them suitable for obtaining enhanced selectivity at 30% formaldehyde conversion. Most of the MOFs tested showed low structural stability under reaction conditions, thereby indicating the need to search for new MOF families with higher robustness. However, this important result opens the path for future research on porous heterogeneous basic catalysts for the formose reaction.