Fagus Sylvatica Research Articles

Study of Selective Modification Effect of Constructed Structural Color Layers on EUROPEAN Beech Wood Surfaces

In this study, the brush method was used to construct structural color layers on the surface of European beech wood, which has wide rays. The purpose was to expand the research on the structural color modification of wood surfaces and to promote its industrial application. By comparing the structural color layers constructed through brushing on beech wood and glass surfaces, the construction speed on the wood surface was significantly faster than that on the glass surface, which was mainly attributed to the porous structure and hydrophilicity of the wood, which made the solvents to be absorbed quickly, greatly improving construction efficiency. At the same time, the wide-ray regions of the European beech wood showed distinct and excellent structural color modification effects. This specific effect was not only reflected in faster construction speeds than other regions, but also in a complete and full-color block. Moreover, by changing the particle size, raw material, and structure of the microspheres, and by brushing several times, the special construction phenomenon and decorative effect still existed. By characterizing the surface morphology and roughness of beech wood, it was found that the surface of the wide rays was flatter than other anatomical structural regions, which was more conducive to the self-assembly of microspheres and the formation of a structural color layer. The results of this study will help to advance the development of technologies such as structural color-selective modification of wood surfaces.

Tree-ring formation dynamics in Fagus sylvatica and Quercus petraea in a dry and a wet year

European beech Fagus sylvatica and Sessile oak Quercus petraea are reaching the north-eastern limits of their natural ranges in northern Poland. According to the projected changes in potential ranges in this region, climatic conditions for both species until 2080 will remain stable. On the other hand, a decrease in the vitality of mature trees and a reduction in their radial growth are currently observed. To understand these contradictory findings, we monitored the cambial activity in both species during two vegetation seasons. 2015 was characterized by a negative water balance, while 2017 was wet. This provided an opportunity to compare how the xylogenesis proceeds in diffuse-porous beech and ring-porous oak during contrasting in the summer precipitation seasons. The forming annual increments were sampled with Presler borer at variable time intervals depending on the leaf phenological phases. The cores were prepared using a sledge microtome and double-stained with safranin and astra blue. Observations of the phases of wood formation and measurements of the width of the forming increments were analysed on the microslide digital images. Differences in the dates of the phenological phases were analysed using Two-Way ANOVA, while the dynamics of the formation of annual increments were fitted to the Single and Double Gompertz function for beech and oak, respectively. The beginning of vessel formation started earlier in both seasons compared to previous studies. Inter-seasonal differences in the duration of spring phenological phases were insignificant for both species, while inter-species differences were significant due to physiological diversity between diffuse-porous beech and ring-porous oak. In dry 2015, cambial activity ceased sooner in both species than in 2017. Differences between oak and beech were insignificant in both years, but statistically significant disparities existed within each species due to varying in precipitation seasons. Rainfall significantly elongated the duration of cambial activity and caused wider tree-rings. According to our study, despite predicted maintaining their climatic niche, both species, situated at the north-eastern cooler range boundary, are expected to produce wood at a lower rate due to the projected warmer central European climate with increased heatwaves and summer droughts.

Structural reorganization in beech forests in central Germany as response to drought-induced mortality in the overstory

Prolonged periods of extreme heat and drought are changing forest health and forest structure. Loss of vitality, signs of dieback, and mortality of trees are reported in many regions of the world. There is a need for information on the quantification of drought effects on forest structure in order to detect drought stress at an early stage. Furthermore, forest structure is linked to growth processes that result from single tree and stand dynamics. In this study, we used mobile laser scanning to objectively assess forest structure in European beech (Fagus sylvatica L.) stands differently affected by drought. We used the box-dimension as a holistic measure of structural complexity that jointly describes both distribution and amount of plant material in a forest, and canopy cover as a measure for overall defoliation. We observed large canopy gaps in heavily damaged stands, but the overall structural complexity of the forest stands remained unchanged. However, when dividing the 3D forest stand model from mobile laser scanning into 5 m height layers, we noticed a “structural flip” with reduced structural complexity in the upper parts of the forests and increased structural complexity in the lower strata. This indicates that the forests are responding to drought with increased mortality of mature trees, resulting in increased light availability in the understory and consequently increased growth of the understory trees. The rather indifferent overall structural complexity of the investigated forests was due to the reorganization of structures by shifting the major foliage layer from top-to-bottom and is interpreted as a successful ecosystem-scale response to the drought events. However, it is unclear how these forests will respond to repeated droughts. The “structural flip” should therefore be regarded as an early warning signal pointing to increased ecosystem stress, though the stress level has not yet exceeded the adaptive capacity in the investigated forest.

Decadal forest mensuration cycle significantly underestimates net primary production in dense young beech stands

The early development of naturally regenerated forest stands is highly dynamic and includes rapid shifts in productivity and mortality. To characterise the growth dynamics in the initial decades, we assessed aboveground biomass stocks (Sab),aboveground biomass productivity (DPab), and aboveground biomass mortality (DMab) in five naturally regenerated European beech stands located in the Inner Western Carpathians. We developed allometric models for aboveground biomass compartments based on a sample of 262 trees. We also established five circular sampling plots within each stand and, for 15 years, carried out annual measurements of stem diameter at the base and height for all trees within the sampling plots. We then utilised the allometric models to calculate annual biomass accumulation in aboveground biomass compartments on an area basis. Our findings show that, despite the declining contribution of foliage to the total aboveground stock, about a quarter of annual net primary production in young beech stands enters the dead biomass pool due to leaf fall and tree mortality. The growth dynamics and biomass allocation patterns of young beech forests necessitate the development of specific allometric models to describe their growth and carbon capture processes.

Soil water storage capacity and soil nutrients drive tree ring growth of six European tree species across a steep environmental gradient

Tree growth depends on tree-intrinsic attributes, synecological interactions, atmospheric conditions and soil properties. While the influence of tree factors and climate are analysed in detail in many studies, the effect of soil properties is less investigated and compensatory soil effects are often not quantified. In this study, we use a comprehensive dataset of 1659 tree increment cores from six common Central European tree species (Abies alba, Fagus sylvatica, Larix decidua, Picea abies, Pinus sylvestris, Quercus spp.) sampled at 1562 locations across large environmental gradients in the Eastern Alps. Soil data was available from an extensive soil survey including soil pits, laboratory analysis and the application of pedotransfer-functions. Up to three main tree species per site were sampled and the tree ring widths were dendrochronologically measured and synchronized. Topographic information from a high-resolution Digital Terrain Model, high-resolution climate data and biometric measures were available at each site. To determine the influence of soil water storage capacity and soil nutrient status, we used generalized additive models to expand standard models of well-known drivers of tree growth, including age, climatic water balance and temperature. For the time span of 38 years from 1981 until 2018, we found species-specific impacts of soil properties on tree ring growth. Specifically, soil water storage acted as a buffer to overcome drought periods, in particular for deep rooting tree species like Quercus spp. and Abies alba. In addition, we found species-specific growth reactions to soil nutrient status for nutrient-demanding species likes Fagus sylvatica but no effects for less demanding tree species like Pinus sylvestris. Our results show the magnitude of the effects of soil properties in relation to other growth factors on radial growth of six Central European tree species. Therefore, we posit that, while age and climate do have a stronger influence on tree growth, it is important to consider soil as a growth factor, particularly at the distribution margins along climatic gradients.

Modification of wood via biochar particle impregnation

AbstractThermal-hydro-mechanical (THM) densification was performed on Picea abies (spruce), Abies alba (European fir), Populus nigra (poplar), and Fagus sylvatica (beech). Prior to THM treatment, the wood was impregnated with an aqueous solution containing 1%, 2.5%, and 5% biochar. Mechanical characteristics (modulus of elasticity, modulus of rupture), set-recovery, and contact angle were measured and compared for all samples in relation to the percentage of biochar present in the mixture. Impregnation with biochar/water mixture in combination with THM treatment resulted in densified wood with improved properties. Spruce showed the most notable improvement in water resistance, in addition to having the largest reduction in set-recovery at 57% and the highest contact angle value at 120°. There was also significant improvement in the mechanical properties of spruce wood, especially when impregnated with 2.5% and 5% of biochar, with MOE values of 17.09 and 18.61 GPa and MOR values of 190.47 and 176.41 MPa, respectively. The only comparable values were observed in beech impregnated with 2.5% biochar mixture, with a MOR value of 204.6 MPa. These findings highlight the effectiveness of biochar-enhanced impregnation together with THM treatment in improving the structural and mechanical properties of wood, with distinct improvements observed in spruce and a few improvements in beech.

Mineralisation of CO2 in wood biomass ash for cement substitution in construction products

This study extends our exploration of the potential of biomass ashes for their CO2-reactivity and self-cementing properties. The ability of three hardwood-based biomass ashes to mineralise CO2 gas and partially replace CEM I in mortars was investigated. The three hardwoods were English oak (Quercus rober), English lime (Tilia x europaea), and beech (Fagus sylvatica). The woody biomass wastes were incinerated at 800°C to extract their key mineral phases, which are known to be reactive to CO2 gas to form carbonates. The selected biomass ashes were analysed for their CO2-reactivity, which was in the range of 32–43% (w/w). The ashes were used to replace CEM I at 7 and 15% w/w and this “binder” was mixed with sand and water to produce cylindrical monolithic samples. These monoliths were then carbonated and sealed cured over 28 days. The compressive strength, density and microstructure of the carbonate-hardened monoliths were examined. The ash-containing monoliths displayed mature strengths comparable to the cement-only reference samples. The CO2 uptake of oak containing monoliths was 7.37 and 8.29% w/w, for 7 and 15% ash substitutions, respectively. For beech and English lime they were 4.96 and 6.22% w/w and 6.43 and 7.15% w/w, respectively. The 28 day unconfined compressive strengths for the oak and beech ashes were within the range of ~80–94% of the control, whereas lime ash was 107% of the latter. A microstructural examination showed carbonate cemented sand grains together highlighting that biomass ash-derived minerals can be very CO2 reactive and have potential to be used as a binder to produce carbonated construction materials. The use of biomass to energy ash-derived minerals as a cement replacement may have significant potential benefits, including direct and indirect CO2 emission savings in addition to the avoidance of landfilling of these combustion residues.

Effects of Drought, Phosphorus Fertilization and Provenance on the Growth of Common Beech and Sessile Oak

The negative impact of drought on plant growth may be modified by the different availability of mineral nutrients and by their adaptation to different local habitat conditions. In this study, we examine the impact of drought, fertilization with phosphorus and provenance, as well as their interactions, on the growth and allometric growth relationships between the belowground and aboveground organs of common beech (Fagus sylvatica L.) and sessile oak (Quercus petraea (Matt.) Liebl.). The research was conducted on saplings originating from two mature mixed stands (dry and wet provenances) dominated by these species. In the common garden experiment, saplings were exposed to regular watering and drought in interaction with moderate and high phosphorus concentrations in the growing substrate (achieved by phosphorus fertilization). The obtained results indicate the negative impact of drought and phosphorus fertilization on the growth of both species. In common beech, a negative impact of phosphorus fertilization on the adaptive capacity to drought was demonstrated by unfavorable ratios between fine root mass and the mass of other organs. The sessile oak provenances under the impact of drought showed a different root collar diameter/stem height increment ratio, which indicates their different phenotypic plasticity as a consequence of adaptation to different frequencies of dry periods in their natural habitats.

Experimental and Numerical Research on the Splitting Capacity of European Beech Beams Loaded Perpendicular to the Grain by Connections: Influence of Different Geometrical Parameters

In the present work, single- and double-dowel joints following different geometric configurations are experimentally and numerically investigated to derive the splitting behaviour of beech wood (Fagus sylvatica L.), one of the most widespread hardwood species in Europe for structural purposes. The influence of the spacing between dowels, their distance to the supports, and the slenderness of the beams is analysed. The correlation of the experimental failure loads with those predicted numerically by cohesive zone finite element-based models using the fracture properties of the species is discussed. The experimental results are also compared with those obtained from the normative expression included in Eurocode 5 and two other design models reported in the literature. The splitting failure loads predicted by both the analytical and numerical models were found to be conservative, the latter being closer to the experimental values.

Is mowing effective in reducing rodent damage to forest plantations?

Forest trees, particularly at a young age in afforestation, are susceptible to bark gnawing by herbivorous rodents such as voles. Few preventive measures for vole damage exist, although mowing to control herbaceous vegetation is often suggested. However, no empirical evidence supports the claim that mowing prevents or inhibits rodent damage to seedlings in a forest ecosystem. We examined the effects of single mowing applications on rodent population dynamics and the amount of damage they cause. The study was conducted at 34 randomly selected European beech forest plantations in Poland, with half manually mowed in late summer. In each plantation, we monitored the population dynamics of small rodents every 2 months from December 2019 to April 2021, and/or measured the level of damage to tree saplings monthly. The amount of damage followed a clear seasonal pattern with peaks in late autumn ranging from 0 to 40% of saplings per plantation. Mowing did not alter the pattern of population dynamics of small rodents (including voles and mice) on the plantations, nor did it reduce sapling damage caused by rodents. Additionally, herbaceous vegetation cover had no significant effect on the damage intensity. Our results indicate that mowing is ineffective in preventing tree damage by small rodents in forest plantations; therefore, we do not recommend it as a forestry practice. © 2023 Society of Chemical Industry.

Aiming at a moving target: economic evaluation of adaptation strategies under the uncertainty of climate change and CO2 fertilization of European beech (Fagus sylvatica L.) and Silver fir (Abies alba Mill.)

Key messageDrought severely worsened till 2100 and eventually outplayed growth-enhancing CO2 fertilization turning productivity gains into losses for beech and fir. Most scenarios generated notable losses in profitability but economic tipping points were later than for productivity due to lag effects related to discounting. Time mixture of fir and shortening rotation can counteract economic risks under climate change, but requires early admixture and moderate establishment costs.ContextAdaptation strategies to climate change (CC) such as establishing mixed forests are often based on ecological understanding while economic rationale is often disregarded.AimsThis paper studies CC uncertainty on productivity and profitability of European beech (Fagus sylvatica L.) and Silver fir (Abies alba Mill.). Besides, the economic consequences to actively adapt beech forests by admixing Silver fir are investigated.MethodsWe used the process-based forest growth model GOTILWA + to simulate RCP2.6, RCP4.5 and RCP8.5 climatic projection by the MPI-ESM-LR global circulation model (MPI-ESM-LR) with the CO2 fertilization effect (eCO2) switched on and off. We analysed the sensitivity of the land expectation value (LEV) on CC and economic parameters.ResultsCC initially increased productivity, but declined after a tipping point (2040–2070) and later also profitability (2045–2100). RCP8.5 had positive, RCP2.6 negative and RCP4.5 neutral effects on LEV. Switching off eCO2 turned RCP8.5 from the most profitable to the least profitable scenario and the opposite for RCP2.6. CC generally reduced optimal rotation (Ropt) being scenario dependant, but comparatively more for fir than beech. Admixing fir created an economic benefit when implemented before stand age 50 of beech. This benefit was nullified with protection costs for browsing control (fencing or tree shelters).ConclusionsEconomic parameters (not CC) were the major source of uncertainty stemming from discounting factors and establishment costs. Admixture of fir and shortening rotation can provide a solution to tackle economic and climate uncertainties, but requires early admixture and browsing control.

Limitations of estimating branch volume from terrestrial laser scanning

Quantitative structural models (QSMs) are frequently used to simplify single tree point clouds obtained by terrestrial laser scanning (TLS). QSMs use geometric primitives to derive topological and volumetric information about trees. Previous studies have shown a high agreement between TLS and QSM total volume estimates alongside field measured data for whole trees. Although already broadly applied, the uncertainties of the combination of TLS and QSM modelling are still largely unexplored. In our study, we investigated the effect of scanning distance on length and volume estimates of branches when deriving QSMs from TLS data. We scanned ten European beech (Fagus sylvatica L.) branches with an average length of 2.6 m. The branches were scanned from distances ranging from 5 to 45 m at step intervals of 5 m from three scan positions each. Twelve close-range scans were performed as a benchmark. For each distance and branch, QSMs were derived. We found that with increasing distance, the point cloud density and the cumulative length of the reconstructed branches decreased, whereas individual volumes increased. Dependent on the QSM hyperparameters, at a scanning distance of 45 m, cumulative branch length was on average underestimated by − 75%, while branch volume was overestimated by up to + 539%. We assume that the high deviations are related to point cloud quality. As the scanning distance increases, the size of the individual laser footprints and the distances between them increase, making it more difficult to fully capture small branches and to adjust suitable QSMs.

The impact of root systems and their exudates in different tree species on soil properties and microorganisms in a temperate forest ecosystem

BackgroundThe species composition of tree stands plays an important role in shaping the properties of forest soils. The aim of our research was to determine the influence on soil properties of the root systems of six species of trees which form forest stands in the temperate climatic zone. The research covered areas including six tree species – Scots pine (Pinus sylvestris L.), European larch (Larix deciduas Mill.), English oak (Quercus robur L.), English ash (Fraxinus excelsior L.), European beech (Fagus sylvatica L.) and European hornbeam (Carpinus betulus L.). In our study, we determined the characteristics of the roots and the amount of carbon excreted alongside their exudates. Enzymatic activity, and the composition and diversity of the fungi and bacteria, were also determined in addition to the basic physicochemical properties of the soil samples.ResultsA strong relationship between the root characteristics and soil properties, including the pH, basic cation content and phosphorus content, was confirmed. In addition, the enzymatic activity of phosphatase, β-glucosidase, N-acetyl-β-D-glucosaminidase and β-D-cellobiosidase were positively correlated with the root characteristics. The study on soil bacteria across different tree species revealed Proteobacteria and Actinobacteriota to be the most abundant phylum. Fungal analysis showed Basidiomycota and Ascomycota as the dominant phyla. Ascomycota dominated in hornbeam and oak soils. Mortierellomycota was remarkably more present in pine soil.ConclusionsThis analysis of root systems and soil properties confirmed the distinctness of ash stands, which were also more abundant in various microorganisms. It was also found that soils affected by different tree species were characterised by varied fungal and bacterial composition. The ash had particularly beneficial impact on soil microbiota.

Factors determining fine-scale spatial genetic structure within coexisting populations of common beech (Fagus sylvatica L.), pedunculate oak (Quercus robur L.), and sessile oak (Q. petraea (Matt.) Liebl.)

Key messageNaturally regenerating populations of common beech, pedunculate, and sessile oaks develop strong spatial genetic structures at adult and seedling stages. Significant genetic relationship occurs between individuals growing up to 60 m apart. This indicates the minimum distance separating trees from which seeds used for reforestation should be harvested to avoid the adverse effects of excessive relatedness among offspring.ContextSpatial genetic structure is an inherent characteristic of naturally regenerating plant populations and has practical implications in forests for the management of genetic resources.AimsWe investigated the extent of spatial genetic structure in three broad-leaved forest tree species (common beech—Fagus sylvatica L.; pedunculate oak—Quercus robur L.; and sessile oak—Q. petraea (Matt.) Liebl.) coexisting in the same nature reserve, explored its variation among species and different life stages (adults/offspring), and tested its possible determinants.MethodsWe explored patterns of spatial distribution of individuals, and using microsatellites, we estimated parameters of spatial genetic structure based on kinship relationships, considering possible sources of variation.ResultsIn adults, the strongest spatial genetic structure was found for Q. petraea (Sp = 0.0187), followed by F. sylvatica (Sp = 0.0133), and the weakest in Q. robur (Sp = 0.0080). It was uniform across different age classes in pedunculate oak but decreased with age in sessile oak. No apparent relationship between age and spatial genetic structure was found in beech. Offspring exhibited significant spatial genetic structure (ranging from 0.0122 in beech to 0.0188 in sessile oak). The cohorts of seedlings having both parents present within the study site had stronger spatial genetic structures than cohorts of seedlings with only one local parent.ConclusionSpatial genetic structure is strong in naturally regenerating populations of heavy-seeded forest trees. Pollen immigration from outside of a local forest stand can significantly decrease the extent of spatial genetic structure in offspring generations.

Temporal and spatial variability of phloem structure in Picea abies and Fagus sylvatica and its link to climate.

Using a unique 8-year data set (2010-2017) of phloem data, we studied the effect of temperature and precipitation on the phloem anatomy (conduit area, widths of ring, early and late phloem) and xylem-ring width in two coexisting temperate tree species, Picea abies and Fagus sylvatica, from three contrasting European temperate forest sites. Histometric analyses were performed on microcores taken from tree stems in autumn. We found high interannual variability and sensitivity of phloem anatomy and xylem-ring widths to precipitation and temperature; however, the responses were species- and site-specific. The contrasting response of xylem and phloem-ring widths of the same tree species to weather conditions was found at the two Slovenian sites generally well supplied with precipitation, while at the driest Czech site, the influence of weather factors on xylem and phloem ring widths was synchronised. Since widths of mean annual xylem and phloem increments were narrowest at the Czech site, this site is suggested to be most restrictive for the radial growth of both species. By influencing the seasonal patterns of xylem and phloem development, water availability appears to be the most important determinant of tissue- and species-specific responses to local weather conditions.

Determination of the Static Bending Properties of Green Beech and Oak Wood by the Frequency Resonance Technique

This article discusses the non-destructive evaluation of the mechanical properties of green wood. To estimate the dynamic flexural modulus of elasticity (MOED), a non-destructive test (NDT) method—the frequency resonance technique (FRT)—was used. A three-point bending test was carried out to determine the static bending properties as the bending modulus of elasticity (MOE), the modulus of rupture (MOR), and bending toughness (Aw). This article presents the results of a study comparing the correlations between the dynamic and static bending parameters of beech (Fagus sylvatica L.) and oak (Quercus robur L.) wood, which was further divided into heartwood and sapwood. These species were chosen as the most widespread representatives of diffuse-porous and ring-porous hardwoods. This study found statistically significant differences in most mechanical parameters between the two species, except for MOR. Among the investigated parameters, beech had higher values than oak (by 22.1% for MOED, 9.5% for MOE, and 12.1% for Aw). Furthermore, relevant correlations (R > |0.7|) were established between MOED and between some of the static flexural parameters. These correlations were stronger for beech, which due to its more homogeneous structure showed less data variability than the ring-porous oak.

Oak regeneration facing deer browsing: Can competition between saplings offset the diversion effect? A simulation experiment

The constraint caused by wild ungulates on forest regeneration is increasing worldwide. Hypotheses for plant association effects predict that species susceptible to herbivory can gain protection from other neighbouring plant species. In theory, such interactions could help limit the impact of browsing on the regeneration of specific tree species. However, the presence of neighbouring species can also result in increasing competition for resources between species. The resultant effects on forest regeneration of these interactions, both positive (protection against herbivores) and negative (inter-specific competition) are still unclear.To gain insight, we coupled models of browsing by roe deer (Capreolus capreolus) and of forest dynamics to simulate trajectories of oak (Quercus petraea (Matt.) Liebl.) regeneration admixed with species of contrasted palatability and growth rate under different scenarios of browsing pressure and initial sapling density. We also investigated how releasing oak saplings from all or specific neighbours during the simulation affect regeneration.We found that admixed species composition had a relatively weak effect on the density of oak recruits, but a strong effect on the duration of the regeneration phase. Oak regenerated faster when admixed with species of intermediate growth and low palatability (Fagus sylvatica) than with species of fast growth and high palatability (Carpinus betulus L.), except at intermediate sapling density and high browsing pressure where we found the opposite. Releasing oak from all competitors was most effective in promoting oak regeneration when admixed with both species together, although the benefit of competition release was much weaker at high browsing pressure. Lastly, we found that at low initial sapling density (i.e., 10 saplings/m2), oak regeneration was driven only by browsing and the effect of admixing species became negligible.Our study showed that admixing oak with palatable neighbours impedes rather than improves oak regeneration due to increased competition for resources. As such, we suggest that the benefits of herbivore diversion can be off-set by increased inter-specific competition.

The effects of geomorphology, soil and climate on the trajectory of aboveground biomass accumulation of beech (Fagus sylvatica L.) at the southern range margin

Forest ecosystems are among the most important carbon sinks in the terrestrial biomes. Therefore, the estimation of aboveground biomass accumulation is of fundamental importance for understanding the contribution of forest stands to the global carbon budget. In this study, we proposed a modelling approach to estimate aboveground biomass of beech forests in the Central Apennine based on stand age, climatic variables, topographic features and soil parameters. Using forest inventory data from the local forest management plans, international databases, and mixed-effect linear model, we identified stand age as a major driver of beech forests aboveground biomass. Climatic variables had generally higher influence than soil and topographic features, probably as a consequence of the homogeneous calcareous substrate which favoured the development of soils which are highly suitable for the growth of beech. Temperature range and seasonality were the most important climatic variables. Interestingly, we found that the aboveground biomass in Apennine beech forests is strongly site-specific. Different management approaches during the past centuries, i.e. presence or absence of conversion interventions of the analysed stands, are probably responsible for the growing site's significant influence. By highlighting the ideal locations for allocating the functions of forest production or evaluating the value of ecosystem services that regulate the climate, this study will help to improve both the precision of carbon budget modelling and decision-making in nature conservation and forest management.

Impact of land use history and soil properties on soil mite communities (Acari, Mesostigmata) inhabiting stands growing on post‐agricultural land

AbstractDecades of agriculture in a former—type of ecosystem, for example, deciduous forests—result in severe habitat degradation. The planted tree species encounter harsh conditions due to physically and chemically transformed soil environments. In addition, afforestation itself significantly modifies the upper soil horizons. It may impact the soil fauna communities, including mites from the Mesostigmata order (Mesostigmata = Gamasida). Due to their sensitivity, mesostigmatid mites are good bioindicators of changes in the soil. A decrease in the density, species richness, and diversity of mites indicates disturbances in the soil environment and may confirm the impact of agricultural practice on the soil environment. Our research aim was to examine the impact of soil properties and land use history on the mesostigmatid mite communities in stands growing on forest and post‐agricultural lands. These sites were afforested with different tree species (Betula pendula Roth., Fagus sylvatica L., Pinus sylvestris L., and Quercus robur L.). Thus, 21 research plots were established on forest and post‐agricultural land, each on rusty soils considered to be one of the most common in Central European forests. We collected a total of 567 soil samples during three sampling sessions in spring and autumn for soil Mesostigmata investigation. We also described the soil profile on each plot and collected soil and litter samples to measure pH, litter thickness, soil organic matter, bulk density, soil moisture, soil organic carbon, and elements content. Our study revealed that 16 out of 30 environmental parameters differed between habitat types. A total of 1355 mites were classified into 58 taxa (50 species and 8 genera). The most numerous species were Veigaia nemorensis (165 ind.; 12.2% of all mesostigmatid mites), Zercon peltatus (156; 11.5%), and Paragamasus conus (141; 10.4%). The highest abundance was recorded in birch stands on forest land, whereas the lowest abundance for oak stands growing on post‐agricultural land. Interestingly, in oak stands we recorded both the highest diversity of mite communities (forest land) and the lowest on post‐agricultural land. Furthermore, our study showed that post‐agricultural land and Na content in forest litter affected the abundance, species richness, and diversity of mesostigmatid mite communities. Species richness was additionally affected by tree species, that is, pine and oak. Our research indicated that long‐term agricultural practice negatively affected the density, species richness, and diversity of Mesostigmata communities 20 years after afforestation.

Environmental and economic significance of big, old-growth trees

ABSTRACT Big, old-growth European silver fir, beech and oak on high- and medium-fertility soils in the Carpathians generate a huge increase in trunk volume, total phytomass and annual carbon accumulation (25–50 kg). Accordingly, each giant emits a lot of oxygen (65–130 kg/yr) and water vapour (40–80t/yr), and its transpiration consumes 0.03–0.06GWh of energy which can cool a hectare of a 30 m × 1 ha air layer by 0.027–0.053°C. Stands of spruce and stone pine in the high mountain zone grow more slowly; their current increase in trunk volume and material and energy impact on the surrounding air is 3–5 times less but, still, it increases over time. By increasing the number of big old-growth trees in forest stands, stand productivity and the material and energy impact on the environment can be increased by 20–40%.