Fabrication Of Multifunctional Composites Research Articles

Fabrication of Multifunctional Composites with Hydrophobicity, High Thermal Conductivity and Wear Resistance Based on Carbon Fiber/Epoxy Resin Composites

The design and preparation of hydrophobic, wear-resistant, and thermally conductive multifunctional composites is an important direction of scientific research and application. In this study, A-CF/EP/FEP composites were prepared by incorporating APDMS-modified carbon felt (A-CF) into an epoxy resin (EP) and fluorinated ethylene propylene resin (FEP) mixed resin. The low surface energy of FEP, good adhesion of EP, and the supporting of carbon felt framework endow the A-CF/EP/FEP composites with hydrophobicity, wear resistance, and thermal conductivity at the same time. Firstly, the water contact angle (WCA) of A-CF/EP/FEP composites with 20 wt% FEP reaches 109.9 ± 2.6°, and the WCAs of all composites with different FEP contents (10, 20, 30, 40, and 50 wt%) is greater than 90°, indicating the composites have a hydrophobic surface. Secondly, the A-CF/EP/FEP composites have high wear resistance and maintain long-term hydrophobicity after tribological tests, because the residual debris and nanoparticles generated by external loading adhere to the friction interface, regenerating the microstructure of the hydrophobic surface. Finally, the A-CF/EP/FEP composites have high thermal conductivity up to 0.38 W/(m·K), which is 1.81 and 2.0 times that of pure EP and EP/FEP composites, respectively. This is because a relatively complete heat conduction network is formed after the addition of A-CF to the composites. The synergy among epoxy resin, FEP, and the A-CF filler plays a particularly important role in constructing hydrophobic surfaces and improving wear resistance and thermal conductivity. The EP enhances adhesion, the FEP supplies low surface energy, and the A-CF framework improves the wear resistance of A-CF/EP/FEP composites. This work provides ideas for the design and preparation of multifunctional composites and will underlie the application of high-performance epoxy resin and its composites.

Cascade amplified colorimetric immunoassay based on an integrated multifunctional composite with catalytic coordination polymers for prostate specific antigen detection.

Coordination polymers (CPs) have been extensively investigated for a variety of applications because of their tunable structures and properties. In this work, we demonstrated the potential of catalytic CPs in the fabrication of an integrated multifunctional composite for establishing a cascade amplified immunoassay. For this purpose, an Fe(iii)-based CP (FeCP) with peroxidase-like activity was employed as a model of catalytic CPs to simultaneously integrate glucose oxidase (GOx) and the anti-prostate specific antigen (anti-PSA) antibody through a self-adaptive inclusion process. This leads to the formation of a dual-functional anti-PSA/GOx@FeCP composite with cascade catalytic activity and capture ability to target the antigen. Benefiting from the shielding effect of FeCPs as a host, a significantly improved stability against harsh environments can be achieved for the loaded GOx and anti-PSA antibody in the composite. On this basis, by utilizing anti-PSA/GOx@FeCPs as a detection antibody, a colorimetric immunoassay based on the cascade catalysis of GOx and FeCPs as a signal amplified enhancer was developed for the detection of PSA. Under optimal conditions, satisfactory detection results have been achieved in both buffered aqueous solutions and serum samples. We believe that this study will open up a new avenue for the rational design and fabrication of multifunctional composites while offering a new cascade amplification strategy for PSA detection.