Extractable Soil Metal Research Articles

Soil health as a proxy for long-term reclamation success of metal-contaminated mine tailings using lime and biosolids

Mine lands contaminted with heavy metals pose environmental risks, and thus reclamation is paramount for improving soil, plant, animal, and ecosystem health. A metal-contaminated alluvial mine tailing, devoid of vegetation, received 224 ​Mg ​ha−1 of both lime and biosolids in 1998, and long-term reclamation success was quantified in 2019 with respect to soils, plants, and linkages to animals. Reclamation success was quantified using the Soil Management Assessment Framework (SMAF), in conjunction with bioavailable (0.01 ​M CaCl2 extractable) and plant-available (Mehlich-3 extractable) soil metal concentrations, X-ray absorption spectroscopy, plant metal concentrations, and plant quality characteristics. Results showed that all soil indicators were improved in successfully-reclaimed areas as compared to on-site degraded areas, including increases in soil aggregate stability, pH, plant-available P and K, soil organic C, potentially-mineralizable N, microbial biomass C and β-glucosidase activity and decreases in soil bulk density and electrical conductivity. Of indicators, unitless soil health scores were assigned based on the SMAF, with data suggesting that bulk density, wet aggregate stability, potentially- mineralizable N, microbial biomass C, pH, and electrical conductivity should be monitored in the future. The long-term effects of lime and biosolids application have improved soil physical, biological, and overall soil health. Plant metal concentrations have decreased by an order of magnitude since early reclamation, with most plant metal concentrations being tolerable for domestic livestock consumption. From an animal health perspective, feeding grasses from this site during latter parts of a growing season may need supplemental feed to provide greater protein and energy content, and to reduce potentially-harmful Cd concentrations from food chain bioaccumulation. However, a health concern exists based on soil bioavailable Cd and Zn concentrations that exceed ecological soil screening levels. Still, plants have stabilized the soil and acidity remains neutralized, leading to long-term improvements in soil health, with overall improved ecosystem health.

Interrelationships of metal transfer factor under wastewater reuse and soil pollution

The transfer of heavy metals under soil pollution wastewater reuse was studied in a Greenhouse experiment using a randomized block design, including 6 treatments of heavy metals mixtures composed of Zn, Mn, Cd, Co, Cu, Cr, Ni, and Pb, where each metal was taking part in the mixture with 0, 10, 20, 30, 40, 50 mg/kg respectively, in four replications. The Beta vulgaris L (beet) was used as a test plant.It was found that the metal transfer factors were statistically significantly related to the: (i) DTPA extractable soil metals, (ii) the soil pollution level as assessed by the pollution indices, (iii) the soil pH, (iv) the beet dry matter yield and (v) the interactions between the heavy metals in the soil. It was concluded that the Transfer Factor is subjected to multifactor effects and its real nature is complex, and there is a strong need for further study for the understanding of its role in metal-plant relationships.

Evaluation of the Interactions between Water Extractable Soil Organic Matter and Metal Cations (Cu(II), Eu(III)) Using Excitation-Emission Matrix Combined with Parallel Factor Analysis.

The objectives of this study were to evaluate the binding behavior of Cu(II) and Eu(III) with water extractable organic matter (WEOM) in soil, and assess the competitive effect of the cations. Excitation-emission matrix (EEM) fluorescence spectrometry was used in combination with parallel factor analysis (PARAFAC) to obtain four WEOM components: fulvic-like, humic-like, microbial degraded humic-like, and protein-like substances. Fluorescence titration experiments were performed to obtain the binding parameters of PARAFAC-derived components with Cu(II) and Eu(III). The conditional complexation stability constants (logKM) of Cu(II) with the four components ranged from 5.49 to 5.94, and the Eu(III) logKM values were between 5.26 to 5.81. The component-specific binding parameters obtained from competitive binding experiments revealed that Cu(II) and Eu(III) competed for the same binding sites on the WEOM components. These results would help understand the molecular binding mechanisms of Cu(II) and Eu(III) with WEOM in soil environment.

Is vetiver grass of interest for the remediation of Cu and Cd to protect marketing gardens in Burkina Faso?

In Burkina-Faso, urban vegetable agriculture is often characterized by urban solid waste fertilizer inputs containing heavy metals such as Cu and Cd. Thus, the relevance of surrounding urban vegetable plots with vetiver hedges to reduce environmental pollution by Cu and Cd was investigated by adsorption studies and pot experiments. Vetiver biomass, its metal contents and, its total and MgCl2 extractable soil metals were monitored over 6months in the presence of a mixture of metal at two concentrations: 2–10 and 100–500mgkg−1, for Cd and Cu, respectively. The Freundlich adsorption coefficient (Kf) values increased after vetiver growth and were significantly higher for vertisol than for lixisol. After 6months, the vetiver that was grown on lixisol accumulated more metal, increasing up to 4635mgkg−1 for Cu and to 21.8mgkg−1 for Cd, than did the vetiver that was grown on vertisol, increasing up to 1534mgkg−1 for Cu and to 7.2mgkg−1 for Cd. The metal bioconcentration factor, which was significantly higher for Cd, increased with the applied concentration and ranged from 1.6 to 14 for Cu and from 2.3 to 22 for Cd. Additionally, the translocation factors were higher for Cd (0.38–7.3) than for Cu (0.07–2.6), and the translocation was easiest from lixisol than from vertisol. Thus our results demonstrate the ability of vetiver for Cu and Cd phytoremediation in Burkina Faso soils. Nevertheless, these results should be confirmed across the field to advocate the establishment of vetiver hedges.

Phytotoxicity of zinc and manganese to seedlings grown in soil contaminated by zinc smelting

Historic emissions from two zinc smelters have injured the forest on Blue Mountain near Palmerton, Pennsylvania, USA. Seedlings of soybeans and five tree species were grown in a greenhouse in a series of mixtures of smelter-contaminated and reference soils and then phytotoxic thresholds were calculated. As little as 10% Palmerton soil mixed with reference soil killed or greatly stunted seedlings of most species. Zinc was the principal cause of the phytotoxicity to the tree seedlings, although Mn and Cd may also have been phytotoxic in the most contaminated soil mixtures. Calcium deficiency seemed to play a role in the observed phytotoxicity. Exposed soybeans showed symptoms of Mn toxicity. A test of the effect of liming on remediation of the Zn and Mn phytotoxicity caused a striking decrease in Sr-nitrate extractable metals in soils and demonstrated that liming was critical to remediation and restoration.

EFFECT OF WATER QUALITIY ON PRODUCTIVITY OF SOME ONION (Allium cepa L.) CULTIVARS, SOIL PROPERTIES AND THEIR CONTENTS OF HEAVY METALS

Two Lyzimeter experiments were conducted at Sakha Agricultural Research Station, Kafr El-Sheikh Governorate Egypt, for two seasons, 2010/2011 and 2011/2012 Lyzimeters (100 x 70 x 90 cm) were filled with clayey soil and irrigated with for three water treatments twenty five years The present study aimed to investigate the effect of irrigation water quality for long-term on productivity of three onion cultivars Behairy Red (CV1), Giza 20 (CV2) and Giza Red (CV3). Three irrigation water qualities; Nile water (W1), agriculture drainage water (W3) and mixed water; W2 ( 50% W1 + 50% W3) used for irrigation to study its effects on onion contents from four heavy metals Ni, Cd, Pb and Cu and some soil characteristics. A split–plot design with four replicates was used where, water treatments and cultivars were allocated to main and sub-plots, respectively. The obtained results showed that: Using poor water quality for irrigation increased ECe, SAR, soluble cations and anions in soil paste extract and DTPA extractable heavy metals in soils (Cu, Ni, Cd and Pb) than that of mixed or good water quality. The maximum values of marketable yield and total bulbs yield/fed. As well as bulb quality (bulb diameter and average bulb weight) were obtained by irrigated with Nile water, while the lowest values were obtained by agriculture drainage water in 1st and 2nd seasons. Behairy Red cultivar produced the highly significant marketable yield and total yield, and significantly decreased culls yield as well as bulb quality (bulb diameter and average bulb weight). On the other hand, Giza 20 produced the highly significant total soluble solids (TSS%) in both seasons. The highest values concerning the previous characters were obtained with Behairy Red cultivar under Nile water irrigation, whereas the lowest values were obtained by Giza Red in soil irrigated with agriculture drainage water in both seasons. Content of the studied heavy metals were greater in bulb than in leaves. The results showed that Behairy Red cultivar (cv1) was more tolerant cultivar to agriculture drainage and mixed water and its contents of Ni, Pb and Cu. No significant differences were found between Cd content at all studied onion cultivars used for. The heavy metals content of onion cultivars from can be arranged as follows: With Pb: CV1<C V3 < CV2 With Cu: CV1 < CV2 < CV3 With Ni: CV2 < CV1 < CV3

Heavy metals In agricultural soils and Irrigation wastewater of Mixquiahuala, Hidalgo, Mexico

Agricultural soils irrigated with wastewater pose a significant risk in the accumulation of heavy metals, a problem that affects agriculture and human health. An investigation was conducted on the concentration of heavy metals in agricultural soils and wastewater used for irrigation in plots of Mixquiahuala, Hidalgo. It analyzed the potential of hydrogen (pH), electrical conductivity (EC) and total extractable heavy metals in water and soil: As, Cd, Cr, Hg, Ni, Pb and Zn. Heavy metals were determined by using an Inductively Coupled Plasma (ICP) Perkin Elmer Optima 5300 (Inductively Coupled Plasma), using the methods recommended by the Environmental Protection Agency (EPA) and American Public Health Association (APHA). The study was conducted in November 2009. The sampling was conducted in two replications for both soils and wastewater. It compared the concentration of heavy metals with the criterion of Norma Oficial Mexicana-001-ECOL-1996. Based on these results, the concentration of extractable metals in agricultural soils of Mixquiahuala, Hidalgo, was presented in the following order: Pb > Ni > Cd > As > Cr > Hg. Water for agricultural irrigation did not present problems for use based on the concentration of As, Cd, Hg, Ni, Cr and Zn. However, lead concentration exceeded the maximum permissible limits in 40% of water samples analyzed. Considering the limits established in Spain, the concentrations of As, Ni and Cd exceeded permissible levels in 20, 60 and 60% respectively, of the samples analyzed. Key words: Heavy metals, agricultural soil, maximum permissible limits.

Effects of electrokinetic-assisted phytoremediation of a multiple-metal contaminated soil on soil metal bioavailability and uptake by Indian mustard

Electrokinetic-assisted phytoremediation is an innovative technology to decontaminate heavy metal contaminated soil. In this study, the effect of electric current on plant growth and speciation of soil heavy metals has been investigated by pot experiments, and the remediation processes of electrokinetic-assisted phytoremediation has been discussed. After Indian mustard ( Brassica juncea) grew for 35 d, four voltage gradients (0, 1, 2, 4 V cm −1) of direct-current (DC) were applied timely (8 h d −1) across the soils for 16 d. The extractable soil metals by different extraction methods had a significant redistribution from the anode to the cathode after the treatments. Simple correlation analysis indicated that the correlation coefficients of the extractable soil metals with root metals were better than that with shoot metals. Plant uptake of metals increased by the electrokinetic-assisted phytoremediation, and a medium voltage gradient of 2 V cm −1 was the best due to the highest metal accumulation in the plant. Voltage gradient was the most important factor in affecting the plant growth, soil properties and metal concentrations in the soil and plant.

Transport of zinc, copper, and lead in a sewage sludge amended calcareous soil

The application of sewage sludge on farmland is practised in many countries since sludge is rich in macro- and micro- nutrients. However, increasing use of sewage sludge on farmland has raised concerns about the potential transport of heavy metals into food chains and groundwater. This study determined for a calcareous soil the effects of sludge application on soil physical properties and transport of zinc (Zn), copper (Cu), and lead (Pb). Secondary anaerobic digested sewage sludge was applied at rates of 0, 25, 50, and 100 t/ha (on a dried weight basis) for four consecutive years and mixed in the top 20-cm of soil. Corn (Zea mays L.) was planted as a spring crop, followed by wheat (Triticum aestivum) as a winter crop. Sludge application increased the dissolved organic matter content and modified the soil structure, increased the soil infiltration rate, saturated hydraulic conductivity, and aggregate stability, and decreased the bulk density. Sludge application greatly increased DTPA (diethylenetriamine pentaacetic acid)-extractable soil metal concentrations to 50 cm depth and significantly to 1 m. In the plots that received four application of 100 t/ha sewage sludge, the mean concentrations of Zn, Cu, and Pb in subsoil increased by 1600, 7, and 4.5 times, respectively, compared with the control. The results indicate that a combination of enhanced soil physical properties, heavy and inefficient irrigation and high organic matter content with heavy metals cause significant metal mobility. High sludge applications pose risks of groundwater and food chain contamination and rates are best restricted to those reflecting the nutrient demand of crops (20 t/ha every 4 to 5 yr or an average of 4 to 5 t/ha/yr).

Metal Status of Soils and Plants Irrigated with Water from Lake İznik, Turkey

Lake İznik, located in the southeast part of the Marmara region in Turkey, is considered the largest lake in the region. Soil pollution from irrigation with lake water has become an important concern for arable lands surrounding the lake. Therefore, a study was conducted to investigate trace element contamination of soils and plants irrigated with water from the lake, which has been polluted with industrial and municipal wastes. Eleven different crops grown in 30 different horticultural fields, consistently irrigated with lake water, were studied. To determine pollutant concentrations, soils, plants, and water were sampled and analyzed for both total and extractable iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), cobalt (Co), nickel (Ni), chromium (Cr), lead (Pb), and cadmium (Cd). Iron, Cu, and Ni in destructively sampled soils were found to be excessive in soils. The results were subjected to statistical analysis using simple correlations and t‐test. There were no statistically significant relationships among the total and extractable metals in soils and extractable plant metals. Because of lack of standard concentrations indicating excessive concentration of extractable elements, statuses of extractable elements in the soils were not evaluated. Cobalt, Pb, Cr, and Cu concentrations were greater than the normal range in leaves. The accumulation of metals differed greatly among the various plant species, but irrigation with lake water did not increase metals in soils. The appearance of metals in soils might be due to agricultural activities and parent material. Continuous monitoring and future studies of the area are recommended to ascertain long‐term impacts of pollution on plants.

Modeling the Transport of Metals with Rate-Limited EDTA-Promoted Extraction and Dissolution during EDTA-Flushing of Copper-Contaminated Soils

EDTA-flushing of artificially contaminated soils enhanced Cu extraction but also induced mineral dissolution simultaneously. The mobilization and transport of these metal-EDTA complexes was investigated with column experiments. A quantitative transport model was proposed for simulating the experimental breakthrough curves of Cu, Fe, Al, and Ca. The rate-limited EDTA-promoted extraction and dissolution could be described by respective second-order kinetic terms, which were necessary for explaining the time-dependent depletion of extractable metals (sorbed and indigenous) in soils with continuous EDTA-flushing. Simultaneous simulation of extraction of sorbed Cu and dissolution of soil Fe, Al, and Ca is more conceptually accurate than individual modeling of each metal because the latter approach tends to overestimate the concentration of free EDTA during transport and thus underestimate the rate coefficients of EDTA-promoted dissolution. The fitted rate coefficients of Cu were about an order of magnitude larger than those of Fe and Al; these values probably reflect Cu extraction from weakly sorbed fractions and Fe and Al dissolution from amorphous oxides. The apparent retardation of Fe, Al, and Ca transport had to be taken into account by empirical determination, which was attributed to the metal lability in soils and thermodynamics of surface complexation.

Relationship Between Extractable Metals in Acid Soils and Metals Taken Up by Tea Plants

The accumulation of heavy metals in plants is related to concentrations andchemical fractions of the metals in soils. Understanding chemical fractions and availabilities of the metals in soils is necessary for management of the soils. In this study, the concentrations of copper (Cu), cadmium (Cd), lead (Pb), and zinc (Zn) in tea leaves were compared with the total and extractable contents of these heavy metals in 32 surface soil samples collected from different tea plantations in Zhejiang province, China. The five chemical fractions (exchangeable, carbonate‐bound, organic matter‐bound, oxides‐bound, and residual forms) of the metals in the soils were characterized. Five different extraction methods were also used to extract soil labile metals. Total heavy metal contents of the soils ranged from 17.0 to 84.0 mgCukg−1, 0.03 to 1.09 mg Cd kg−1, 3.43 to 31.2 mg Pb kg−1, and 31.0 to 132.0 mg Zn kg−1. The concentrations of exchangeable and carbonate‐bound fractions of the metals depended mainly on the pH, and those of organic matter‐bound, oxides‐bound, and residual forms of the metals were clearly controlled by their total concentrations in the soils. Extractable fractions may be preferable to total metal content as a predictor of bioconcentrations of the metals in both old and mature tea leaves. The metals in the tea leaves appeared to be mostly from the exchangeable fractions. The amount of available metals extracted by 0.01 mol L−1 CaCl2, NH4OAc, and DTPA‐TEA is appropriate extractants for the prediction of metals uptake into tea plants. The results indicate that long‐term plantation of tea can cause sol acidification and elevated concentrations of bioavailable heavy metals in the soil and, hence, aggravate the risk of heavy metals to tea plants.

Soil pH Effects on Uptake of Cd and Zn by Thlaspi caerulescens

For phytoextraction to be successful and viable in environmental remediation, strategies that can optimize plant uptake must be identified. Thlaspi caerulescens is an important hyperaccumulator of Cd and Zn, whether adjusting soil pH is an efficient way to enhance metal uptake by T. caerulescens must by clarified. This study used two soils differing in levels of Cd and Zn, which were adjusted to six different pH levels. Thlaspi caerulescens tissue metal concentrations and 0.1 M Sr(NO3)2 extractable soil metal concentrations were measured. The soluble metal form of both Cd and Zn was greatly increased with decreasing pH. Lowering pH significantly influenced plant metal uptake. For the high metal soil, highest plant biomass was at the lowest soil pH (4.74). The highest shoot metal concentration was at the second lowest pH (5.27). For low metal soil, due to low pH induced Al and Mn toxicity, both plant growth and metal uptake was greatest at intermediate pH levels. The extraordinary Cd phytoextraction ability of T. caerulescens was further demonstrated in this experiment. In the optimum pH treatments, Thlaspi caerulescens extracted 40% and 36% of total Cd in the low and high metal soils, respectively, with just one planting. Overall, decreasing pH is an effective strategy to enhance phytoextraction. But different soils had various responses to acidification treatment and a different optimum pH may exist. This pH should be identified to avoid unnecessarily extreme acidification of soils.

Determination of the method detection limits for acid extractable metals in environmental solids: a comparative approach

The accurate determination of method detection limits (MDLs) for acid extractable metals in environmental solid samples (soils, sediments and solid wastes) has been shown to be difficult because not only is it difficult to obtain a representative reference soil sample but also sample spiking is difficult. The use of reagent water as the reference matrix for the determination of MDL in soils does not reflect the matrix effect of real world samples. This paper proposes a comparative approach for determining MDLs for acid extractable metals in soils by first comparing the MDL derived from environmental surface waters with the MDL estimated from the replicate analyses of real soil samples, before assigning a rational MDL values for use in soils. This comparative approach does not require spiking soil and provides more realistic MDL values than the reagent water-based MDLs because they reflect the matrix effect of soils. This paper also provides a method for quantitative description of the matrix effect, which has been a qualitative description in the literature to date. The assigned MDL is verified using the relative standard deviation (RSD) obtained from the analysis of soils of different textures.

Influence of soil type differences on the distribution of DTPA extractable heavy metals in soils irrigated with industrial effluents

This study determined the effects of the application of industrial liquid waste from a textile factory on the distribution of DTPA extractable metals in a Pelli-Eutric Vertisol and an Eutric Fluvisol at Akaki in Ethiopia, classified according to the FAO-UNESCO Soil Classification System. The Fluvisol is slightly basic on the surface and has sandy clay to clay loam texture, while the Vertisol is strongly basic on the surface, and has clayey texture throughout the profile. Application of the industrial liquid waste modified and increased levels of DTPA metals in the treated Akaki soils compared to natural levels in the background soils. The Fluvisol has more DTPA extractable Fe, Mn, and Zn than the Vertisol. Surface Cu, Cd and Ni contents are higher in the Vertisol opposed to the Fluvisol. However, there is more enrichment of these metals within depth, in the Fluvisol. Pb concentrations in the Fluvisol are about twice as much as the Vertisol throughout the profile. Soil solution pH seems to have the greatest influence for most metals. Surface Cu and Ni of the treated Vertisol are more influenced by organic matter, while on the whole CEC has negative influence on metal availability because of competing ions. These metals generally decrease consistently with depth in the Vertisol, while in the Fluvisol the profile distribution is irregular. Leaching due to coarser textural composition and floodplain soil impacted by the contaminated river sediments are responsible for metal redistribution in the Fluvisol than in the Vertisol. There is thus greater risk of metal uptake by vegetables on the Fluvisol than the Vertisol. Key words/phrases: Background soils, contaminated soils, Fluvisol, industrial waste, Vertisol SINET: Ethiop. J. Sci Vol.26(1) 2003: 47-54

Bioavailability and crop uptake of trace elements in soil columns amended with sewage sludge products

In order to assess the potential impact of long-term sewage sludge application on soil health, the equivalent of about 25 years of agronomic applications of low-metal (`EQ') sewage sludge products were made to greenhouse soil columns. After a 6-year period of `equilibration', during which time successive crops were grown with irrigation by simulated acid rain, the plant-available quantities of trace elements were estimated in the soils by extraction with 0.01 M CaCl2 at 90 °C, and measured directly by uptake into a crop of red clover (Trifolium pratense L.). Soil pH had a strong influence on the level of extractable and plant-available metals, and because the tested sludge products affected soil pH differently, pH was directly factored into the comparison of different sludge treatments with controls. CaCl2-extractable levels of several metals (Cu, Zn, Mo), sulfur and phosphorus were found to be higher in the soils amended with organic-rich sludge products than in the control soils. However, extractable Cd and Ni were not significantly elevated by the sludge amendments, presumably because of the low total loading of these metals. Copper, Zn and Mo applied in the form of sludge ash had low soil extractability, suggesting that these trace metals were trapped in high-temperature mineral phases formed during sludge incineration, and resisted subsequent weathering in the soil environment. Extractable soil metals in the alkaline-stabilized sludge treatment were also generally low. Phytotoxicity from the sludge metal loadings (Zn≤125, Cu≤135 kg/ha), was not clearly indicated as long as soil pH was maintained in the 6–7 range by lime amendment. Nevertheless, unexplained depressions in yield were noted with some of the sludge products applied, particularly the dewatered and composted materials. On limed soil columns, the most consistent effect of sludge product amendment on red clover composition was a marked increase in plant Mo.

Soil moisture effects on uptake of metals by Thlaspi, Alyssum, and Berkheya

Most commonly used hyperaccumulator plants for phytoextraction of metals evolved on soils where moisture is limited throughout much of the year. As these plant species are commercialized for use, they are frequently moved from the point of evolution to locations where environmental conditions may be significantly different. Greatest among these potential differences is soil moisture. The objective of this study was therefore to determine whether these plants could grow in soils with much higher soil moisture and whether they would continue to hyperaccumulate metals as soils approach saturation. We examined extractable soil metal concentrations, plant growth, and metal accumulation for the Ni hyperaccumulators, Alyssum murale and Berkheya coddii and the Zn hyperaccumulators Thlaspi caerulescens cultivars AB300 and AB336. Non-hyperaccumulating control species for each were also examined. In general, extractable soil concentrations of Ni decreased with increasing soil moisture content. Few significant effects related to Zn extractability were observed for any of the soil moisture treatments. The biomass of all tested species was generally greater at higher soil moisture and inhibited at low soil moisture. Further, plants accumulated large amounts of metals from soil at higher soil moisture. Highest foliar concentrations of Zn or Ni were found at the two highest WHCs of 80 and 100%. These results show that hyperaccumulators grow well under conditions of high soil moisture content and that they continue to hyperaccumulate metals. Thus, growing Thlaspi, Alyssum, and Berkheya for commercial phytoextraction under nonnative conditions is appropriate and suggests that this technology may be applied to a wide and diverse range of soil types, climatic conditions, and irrigation regimes.

Microwave extraction of heavy metals from wet rhizosphere soils and its application to evaluation of bioavailability.

Single microwave extraction of heavy metals Cr, Ni, Zn, Cu, Cd, and Pb by the extractants CaCl(2), EDTA, CH(3)COOH and HCl has been established. The experimental conditions were optimized. A microwave power of 60% and an extraction time of 25 min were adopted. Comparison of microwave extraction and conventional extraction methods revealed that results obtained by microwave techniques were generally in a good agreement with those obtained by use of extraction methods; use of the former resulted in substantial time saving and a better precision, however. Microwave extraction was used to evaluate the bioavailability of heavy metals in soils. Single correlation analysis was performed to establish the relationship between the concentrations of the extractable heavy metals in wet rhizosphere soils and their concentrations in wheat ( Troticum aestivum L.) grown on the soils under greenhouse conditions. The correlation coefficients between the extractable metals in soils and their concentrations in wheat roots were found to be 0.5398-0.7819, 0.6425-0.8073, 0.5568-0.8276, 0.5851-0.6087 for the extractants CaCl(2), EDTA, CH(3)COOH, and HCl, respectively.

Plant accumulation of potentially toxic elements in sewage sludge as affected by soil organic matter level and mycorrhizal fungi

Leek ( Allium ameloprasum) was grown in pot trials in two clay loams of contrasting organic contents, with and without indigenous mycorrhizal propagules. Sewage sludges containing varying levels of Cd, Cu and Zn were added. Extractable soil metals, plant growth, major nutrient content and accumulation of metals, and soil microbial indices were investigated. The aim was to establish whether soil organic content and mycorrhizal status affected plant and microbial exposure to these metals. Extractable metals were higher and responses to inputs more pronounced in the arable, lower organic matter soil, although only Cd showed a soil difference in the CaCl 2 fraction. There were no metal toxic effects on plants and some evidence to suggest that they promoted growth. Uptake of each metal was higher in the larger plants of the grassland, higher organic matter soil. Inoculation with arbuscular mycorrhizal fungi increased root Cd and Zn concentrations. With the exception of Cd (roots) and Zn (shoots), higher inputs of sludge metals did not increase plant metals. Zn and Cu, but not Cd, concentrations were higher in roots than in shoots.

Metal and antibiotic resistance traits in Bradyrhizobium sp. (cajanus) isolated from soil receiving oil refinery wastewater

Forty isolates of Bradyrhizobium sp. (cajanus) were isolated from the nodules of pigeon pea plants grown in fields receiving petrochemical industrial wastewater for the past 12 years and characterized using standard methods. The heavy metal analysis of field soil and treated wastewater showed their presence in varying concentrations. All isolates showed resistance to one or more metals at concentrations >200 μg/ml. Multiple metal resistance was a common phenomenon in these isolates. There was no correlation between extractable soil metal concentration and the ability of the isolates to tolerate metal salts in their growth medium as evidenced from their minimum inhibitory concentration (MIC). However, high incidence of metal resistance and the multiple nature of resistance might have been the result of continuous exposure of these strains to heavy metals in the treated wastewater of Mathura Oil Refinery. These strains were also found to be resistant to one or more of the 13 antibacterial drugs tested.